Quality, Precision and Unbeatable Value!

pneumatic push-in fittings system LF 3000

pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329

LF3800 stainless steel push-to-connect fittings

3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider

pneumatic function valves

pneumatic function valves Fluidline omponents, Inc lawson, MI 48017 www.legris.com flow control regulators meter out version meter in version bi-directional version fine adjustment screw locknut fine adjustment

Stainless One-touch Fittings. Applicable Tubing. Tube material Tube O.D. Specifications. Thread Nut Sealant (Thread portion) Component Materials

Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release

Compression fittings Metric and inch

Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.

PNEUMATIC TUBING FITTING

2011 PNEUMATIC TUBING FITTING CATALOGUE FLYTECH ENGINEERING SDN BHD GENERAL INFORMATION Flytech had cooperated with ISAIAH GROUP from Taiwan to promote the Pneumatic Fitting & Tubing. The company takes

10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads

0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated

1COMPRESSION FITTINGS

SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and

UNITED STATES MEXICO CANADA

www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.

Composite Push-In Fittings - NPTF/INCH

composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining

PNEUMATICS FITTINGS See easy to make a connection on page Technical Specification shown on pages

PNEUMATICS FITTINGS Super Speedfit Push-in fittings have been specially designed for miniature pneumatics applications. They provide a fast and secure way of connecting tubes and offer considerable advantages

JOHN GUEST SPEEDFIT FITTINGS

G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE

Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube

Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/ tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range

/ Push-to-conect fittings/ V TOPRING. Push-to-connect fittings Tubings Mufflers

96.830 / Push-to-conect fittings/ V. 09.6.06 TOPRING Push-to-connect fittings s Mufflers TOPFIT POLYMER PUSH-TO-CONNECT FITTINGS SERIES 40 4 MAXFIT POLYMER PUSH-TO-CONNECT FITTINGS SERIES 44 46 TOPFIT

10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads

0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated

PNEUFIT 10 series Push-in fittings

PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for

Inch-size One-touch Fittings. Applicable Tubing: Inch Size Connection Thread: UNF, NPT. How to Order. Applicable tubing O.D.

Inch- One-touch Fittings Series KQ Tubing: Inch Size Thread:, KQ 0 ow to Order S Symbol Nil ccessory Symbol KQN KQC KQ (KQ) roduct s color Body White Black One-touch s Release button Orange Red Name Nipple

LF 3600 Nickel-Plated Brass Instant Fittings

aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding 00 Nickel-Plated Brass Instant ittings One fitting for all industrial

brass compression fittings

compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube

JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS

JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS Compressed Air Technical Information 518 Compressed Air Fittings 519 Brass Compressed Air Fittings 520 Compressed Air Pipe & Accessories 521 Accessories

Compressed Air Systems Pneumatic Fittings LLDPE Tube

John Guest Limited Horton Road, West Drayton, Middlesex UB7 8JL, England Tel: 01895 449233 Fax: 01895 420321. www.johnguest.com and are registered trademarks of John Guest International Limited Copyright

PL Nickel-Plated Brass Spigot Fitting Range

P Nickel-Plated Brass Spigot itting Range P nickel-plated Brass Spigot ittings Stud ittings BP 3BP 4BP BSPP 8BP Metric BP 3BP 4BP BSPP 8BP Metric RBP R3BP SBP S3BP Banjo itting Tube-to-Tube ittings omplementary

Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE. What You Measure, We Manage

Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE What You Measure, We Manage ABOUT US ABOUT US DRM Technic is a global manufacturer and supplier of gas analysis solutions and

Series Variations. General Purpose Fittings Series. Fittings & Tubing. Fittings. One-touch Fittings KQ2 Series. One-touch Fittings KQ2 Series

& One-touch connection and release Possible to use in vacuum to 00 kpa ø2 Sealant/Gasket seal Metric size tube/m, R, Rc thread connection M3 M6 2 General Purpose Series Face seal Metric size tube/g thread

BSP & HOSE Fittings M5, 1/8... 1

SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors

push-to-connect fittings system LF3000

legris products are available from: MARYAD MTRIS push-to-connect fittgs system 3000 Order from: Maryland Metrics email: techfo@mdmetric.com ph. (800)638-1830 fx. (800)87-939 prciple of system 3000 legris

JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING. Compressed Air Technical Information 562. Compressed Air Fittings 563. Brass Compressed Air Fittings 564

JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING Compressed Air Technical Information 562 Compressed Air Fittings 563 Brass Compressed Air Fittings 564 Compressed Air Pipe & Accessories 565 ELEVEN Accessories

Flareless Bite Type Fittings

Ferulok Flareless Bite Type Fittings Ferulok Flareless Bite Type Fittings 4300 atalog BU TU WLN HBU Nut Ferrules Bulkhead Locknut Union Nuts, Ferrules, Locknuts Straights 7 7 7 7 WBU F5BU FBU GBU TRBU

Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group

Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability

Test 12 Connection Thread S12,65 x 1,5. Test Coupling with Piston Valve. Fast Coupling for. Advantages. Working Pressure. Media.

Test 12 Connection Tread S12,65 x 1,5 Introduction SKK12 Test Coupling wit Piston Valve Test Coupling SKK12 Internal Piston Vibration Safety O-ring Spring Sealing at Port Connection Port Connection Fast

We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.

We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems

Mini slides SLT/SLS/SLF

Mini slides SLT/SLS/SLF Precision, rigid guide Highly flexible Adjustable end position cushioning 03/10 Subject to change Products 04/05 1 / 1 Mini slides SLT/SLS/SLF Features SLS SLF SLT SLT/SLS/SLF SLT

Insert Fittings. KF Series

Insert Fittings Series A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials ube grip (resin sleeve) ube is

Threaded fittings. Festo core product range Covers 80% of your automation tasks

q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch

15 and 16 Series BSP and hose fittings

SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical

PEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM

79 For both residential and commercial applications, Viega PEX Press is the trusted way to join PEX tubing. As the world leader in press technology, Viega was the first to offer a press system to the PEX

Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application. non-drip

Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application non-drip 2 Innovative Products for Demanding Applications Innovative Couplings for Fluid

Pipe fittings and flanges, sockets for bayonet locks

Data Sheet 909750 (909725) Page 1/7 Pipe fittings and flanges, sockets for bayonet locks for temperatures up to 600 C for different fitting lengths simple installation and replacement pressure-tight sealing

14 Pressure Measurement. Measuring Devices Description Pressure range Connection Device Page

Measuring Devices Pressure range Connection Device Page Digital display mounting, für niedrige Drücke 0 2. mbar / 2. bar 4 mm tube MPV, MPA.02 portable, hand-operated 0 1 mbar / 10 bar 4 mm tube MHA.03

Non-Drip Quick Connect Couplings

Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application ^ Innovative Products for Demanding Applications Innovative Couplings for Fluid Applications

Compression Fittings 34 Series Inch

4 Series /6" O/ l Wide range of types and sizes l Rugged and durable l Suitable for use under extreme conditions of pressure and temperature l Ideal for most general industrial applications Technical ata

Quick Fitting Type Check Valve. Check Valve. Release ring (polyacetal) Metalic body (nickel-plated brass) Elastic sleeve (nitrile rubber)

Features The heck Valve permits the air flow in one direction but checks the flow in the opposite direction, thus keeping the output pressure at a constant level. The heck Valve can keep the service pressure

FxM. ISO7/1 thread, EN331 standard PN40~PN25(5MOP/20MOP) Size:1/4 ~2

BA VAVE - EVER ANDE F/F Model: E0 Advantica british gas, wras, en approved ball valves yellow stainless steel lever handle; FxF ISO/ thread, EN standard PN0~PN(MOP/0MOP) Size:/ ~ According to EN standard.

Rational supply for tools at work stations

hose reels automatic hose reels Rational supply for tools at work stations Automatic hose reels are essential basic equipment for workshops. They save time and improve comfort and safety when using flexible

Code Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)

411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption

Viega PEX Manifold Plumbing Systems

Viega PureFlow ViegaPEX Tubing Viega PEX Manifold Plumbing Systems MANABLOC Mounting Straps Pair of mounting straps with screws Pre-drilled to mount on 16" center studs ViegaPEX tubing is rated at 100

SPCH/ Big bottle blowing block

> > Blowing block for linear and rotating blow moulding machines > > Digital position indicator - counter with four decade from 000.0 to 00.0 > > Best suited for PET bottles from 5 up to 30 litres (up

Intru-Lok Flareless Bite Type Fittings

Intru-ok Flareless Bite Type Fittings The Fitting Authority 400 atalog Intru-ok Flareless Bite Type Fittings uts, Ferrules, Inserts BIP Knurled ut BI ut BTI ut and Ferrule TI Ferrule TIP Expander / Insert

Type MIT. WEH - We Engineer Hightech. WEH Connector for pressure and vacuum testing DATA SHEET. on components with internal thread

DT SHEET D-2011/09/00027-7-3 Date: 07/2014 Type MIT WEH for pressure and vacuum testing on components with internal thread WEH - We Engineer Hightech Type MIT WEH for internal threads DT SHEET General

Speed Controller with Fixed Orifice

P.G.Information (Specialized product) SP043M-025E P: JO Speed Controller with Fixed Orifice AS****-X250 Feature 1: 0.12mm SMC CORPORATION 1-16-4 Shimbashi, Minato-ku Tokyo 105-0004, JAPAN URL: http://www.smcworld.com

COMPRESSED AIR SYSTEM ½" TO 2½" Quick-Lock Tubing

COMPRESSED AIR SYSTEM ½" TO 2½" Quick-Lock Tubing Why Gardner Denver? Simply stated There is no equal Quick-Lock from Gardner Denver has taken piping systems to a new level. Without compromising any structural

Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI

Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page

Quick-Lock Tubing. Total Solutions for Air, Vacuum & Inert Gas Systems

Quick-Lock Tubing Total Solutions for Air, Vacuum & Inert Gas Systems 2 High Quality Aluminum Piping Systems Compressed Air Piping - Blue 14 mm -.5" Tubing (10 Pack - 8 ft Length) 80 ft C9000-14-BLUE-PK10

PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America

PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only

Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI

Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve ARI-PREDU - ANSI Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling

37 Stainless Steel. A wide range of end configurations are suitable for many Hydraulic applications

JIC Prochem manufactures and supplies an extensive range of JIC Fittings and Adaptors in all configurations. 37 Stainless Steel Fittings Prochem 37 JIC Fittings and Adaptors provide a straightforward,

Pressure sensors SPAN

Features At a glance Communication interface Convenient design Compact design 30x30 mm Degree of protection IP40 Reduced weight with QS4 Universal pressure measurement Pressure and vacuum 13 pressure measuring

Q-Flow product information. Variable area flowmeters for gases and liquids

Q-Flow product information Variable area flowmeters for gases and liquids MyScale Air mm ALU Attractive design and price: Variable area flowmeters Q-Flow The proven variable area flowmeter with compact,

http://www.pisco.co.jp/ http://www.pisco.co.jp/ CVLU http://en.pisco.co.jp 754 PISCO offers maketoorder products to support customer's various requirements such as special specifications, and special

Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG and 1700 Nl/min (1.636 and 1.

Standardized valve series MI-01 Connection pattern according to ISO 5599/1, size 1, 5/2- and 5/3-way NG 9 1610 and 1700 Nl/min (1.636 and 1.728 Cv) Order code Series and function 1) Plug socket see page

5000 Sc. Cleaning Solution Generator Parts Manual. North America / International. DM20008 Rev. 02 (6-2012) *DM20001*

5000 Sc Cleaning Solution Generator Parts Manual North America / International www.tennantco.com DM20008 Rev. 02 (-202) *DM2000* A B Ref Part No. Serial Number Description Qty. 828 (000000- ) Bracket Wldt,

Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI

Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,

Accessories for Lubrication Systems Product Catalogue

Accessories for Lubrication Systems Product Catalogue Productivity is key in today s global economy. Proper lubrication increases uptime and makes maintenance routines simple. Accessories for Lubrication

Semi-rotary drives DRVS

q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch

a World of Connection PLASSIM FITTINGS

PLASSIM FITTINGS C A T A L O G U E Water Distribution 2 Irrigation 12 Telecom 22 Box sizes 27 x 18 x 24 cm A-2 x 28 x 24 cm A-3 48 x 33 x 24 cm A-4 51 x 41 x 41 cm A-5 48 x 33 x 27 cm A-6 51 x 41 x 41

ISO*STAR (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves

*STR (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder speed control

Compression Style Pneumatic

Compression Style Pneumatic Compression Economical U isted Thermoplastic / Soft etal Tubing Parker etru-ok Captive Sleeve etric Tubing PT, BSPT, BSPP, etric Threads Compress-lign Captive Sleeve Two piece

INDUSTRIAL PNEUMATICS - valves

Ball valves Mini ball valve 6560 type Body material: Ball material: Ball seal: Spindle seal: Working temp.: Nickel-plated brass Chromium-plated brass PTFE NBR From -20 C up to +80 C General purpose valve

FF Series (Steel) ISO Interchange

Eaton s FF Series flat face is specifically designed for those applications where quick and easy connections and no-spill performance are essential. The FF Series is ideal for use when global interchangeability

Katalog SC OENA ESEN_OE Prospekt SC Layer USA /23/12 4:42 PM Page 1. Swing Couplings SC

Katalog SC OEN ESEN_OE Prospekt SC ayer US 1.06 8/23/12 4:42 PM Page 1 s SC Katalog SC OEN ESEN_OE Prospekt SC ayer US 1.06 8/23/12 4:42 PM Page 2 2-3 4-5 6 7 8-9 10 11 12 13 14 15 16 17 18 19 21 22 23

Assembly and Maintenance

Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines

Lift Up Floor Locks Multi-Directional Castor. W Series. M Series (full stainless steel) WHEELS & CASTORS

Lift Up Floor s Multi-Directional Castor K Series M Series O Series M Series (full stainless steel) W Series WHEELS & CASTORS WWW.SITECRAFT.COM.AU WHEELS & CASTORS Lift Up Floor s Used on warehouse trolleys,

per metre (Kg) 20mm 0.85

Dia Dia ROUND BAR machining 4 0.09 6 0. 8 0.9 6 0.26 2 0.4 9 6 0.4 8 0.4 6mm 0.4 6 0.6 4 0. 20mm 0.8 6 0.9 8.0. 8.4 4 2. 6 2.48 8 2.60 mm 2.6 2.09 40mm.2 8.6 4 4.2 8 4.8 2.49 2 8 6.20 2 4 6.9 2 8. 2 2

Poly-Tite Fittings. Order By part number and name.

oly-tite ittings Advantages A compact brass compression fitting designed to speed any installation. Body, nut and sleeve are furnished pre-assembled, ready for installation. An exclusive acetal copolymer

Combi-System. Composition pipe Copipe

Combi-System Composition pipe Copipe no. Composition pipe Copipe white rolls DN 10 x 2.0 mm length per roll 50 m 150 10 54 length per roll 100 m 150 01 54 length per roll 200 m 150 02 54 DN 12 16 x 2.0

How to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections

How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number

Timken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly

Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication

Fuelling products Pressure fuelling nozzles HU4000 series hose end pressure refuelling coupling

HU4000 series hose end pressure Proven Design Features Retained Safety in refuelling is of paramount importance. Meggitt's unique internal safety interlock utilises the poppet as an integral part of the

M10 / M12 M12 / M16 M16 / M20 M20 M20 M25 M32 M40 M50 / M / 13,5 13,

Multitite F grey: Light and flexible. Type F is, among others, being used in the buildingindustry, connection of control panels and protection against rodents. F is applied for quick and easy mounting

FISCHER MINIMAX TM SERIES

TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases

EFP SERIES FLAMEPROOF ELECTRICAL CONNECTORS FOR HAZARDOUS ENVIRONMENTS

EFP SERIES FLAMEPROOF ELECTRICAL CONNECTORS FOR HAZARDOUS ENVIRONMENTS Table of Contents EFP Introduction 4 Connector Features 5-7 Code Logic 8 Inline Plug w Threaded Entry Metric 9 Inline Plug w Mechanical

CONNECTED BY AVENTICS PNEUMATIC CONNECTION TECHNOLOGIES

CONNECTED BY AVENTICS PNEUMATIC CONNECTION TECHNOLOIES 2 Connected by AVENTICS Expertise A reliable connection with quick release Pneumatic tubing is just as easy to release as it is to securely connect

Connectivity Products

Cable Glands Strain Relief Snap-In Labels Lock Nuts Torque Wrench Protective Sleeves U2 U5 U5 U6 U7 U8 Features NPT and PG thread cable glands in nylon or metal materials Locknuts in multiple thread sizes

HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215

HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm

Stäubli HPX non-spill range specially designed for high pressure pulsating or vibrating hydraulic lines.

HPX Hydraulics Stäubli HPX non-spill range specially designed for high pressure pulsating or vibrating hydraulic lines. Non-spill, flush face design With non-spill flush faces, the HPX connector prevents

ACCESSORIES. Accessories for distance and position sensors Magnets for HLT 1000, HLT 2000, HNT Electrical accessories HLT

Accessories ACCESSORIES Accessories to suit every sensor! Whether it's electrical connectors, mechanical adapters or the instrument mounting clamps, the wide range of products from HYDAC offers solutions

SCREWED ELECTRO GALVANISED CONDUIT CLASS 3. AS/NZ CONDUIT ELECTRO GALVANISED ( 4 M LENGTHS ) CONDUIT HOT DIP GALVANISED ( 4 M LENGTHS )

SCREWED ELECTRO GALVANISED CONDUIT CLASS 3. AS/NZ 2053.7 CONDUIT ELECTRO GALVANISED ( 4 M LENGTHS ) COND20GAL COND25GAL COND32GAL COND40GAL COND50GAL 20 mm Electro Galvanised 4 metre 25 mm Electro Galvanised

Radiator Lockshield Valves ADN.. AEN..

07 EN - Straight version ADN.. Angle version AEN.. ACVATIX TM Radiator Lockshield Valves ADN.. AEN.. for -pipe heating systems Valve bodies made of brass, mat nickel-plated DN 0, DN and DN 0 Integrated

RMI Temperature control

RMI Temperature control 7 nominal diameters... hot and cold water, glycol water and heat transfer fluid circuits temperature control on injection presses Safe and quick locking A large number of locking

SUCTION FILTERS. PRESSURE (ISO :2002) Collapse, differential for the fi lter element (ISO 2941): 1 MPa (10 bar)

COMPONENTS SUCTION ILTERS SD MATERIALS Cover & housing: Anodized aluminium alloy or 6&6 only: Cover: anodized aluminium alloy Housing: steel ypass valve: Polyammide Seals: NR Nitrile (KM on request fl

Rev/02/ Flared T (SAE J514) ube Fittings

Rev/02/2013 37 lared Tube ittings (SA J514) Introduction PANAM has been in the field of manufacturing precision Tube ittings and Instrumentation valves since the last Two decades. With a team of dedicated

Flow control valves Series SCU, MCU, SVU, MVU, SCO, MCO

S E R I E S SCU MCU SVU MVU SCO Flow control valves Series SCU, MCU, SVU, MVU, SCO, Unidirectional and bidirectional banjo flow controllers Ports M, G1/8, G1/4, G3/8, G1/2 A U T O M A T I C These unidirectional

Data is only for informational purpose. All specifications are subject to change without notice.

MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV

Pressure sensors SDE1, with display

Product range overview Method of measurement Piezoresistive pressure sensor with display Operating voltage Measured variable Pressure measuring range Pneumatic connection Type of mounting Electrical output

Pilot operated 2 port solenoid valve (general purpose valve) 100 VAC 50/60Hz 110 VAC 60Hz 200 VAC 50/60Hz 220 VAC 60Hz 12 VDC 24 VDC 48 VDC 100 VDC

D11/D1 Series (general purpose valve) D11/D1 Series NC (normally closed) type, NO (normally open) type Port size: Rc1/4 to Rc1 Diaphragm structure Refer to Ending 17 for more details. JIS symbol Common

Pressure sensors SPAW with display

Key features At a glance 9 pressure ranges from 1 +1 bar up to 0 +100 bar 4-digit LED display, easy to read, robust Protection class IP67 320 rotatable display 1% accuracy, 0.15% repetition accuracy Temperature

Accessories for all your hose needs

Aeroquip hose assembly master catalog Accessories for all your hose needs Accessories Protective coils, s coil spring.... -2 coil... -2 900952 Plastic coil spring... -2 222005 Stainless steel internal

Air-Pro Blue Polyethylene (PE) Compressed Air Piping System

- Specification Blue Polyethylene (PE) Compressed Air Piping System REV:IN0512PE Materials: ASTM D3350 cell classification PE346544C or better. Resin shall comply with FDA Code of Federal Regulators (CFR),

Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High

Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical

DIN 2353 French series adaptors

Adattatori DIN 2353 Serie Francese Pagina / Page 2 2 Nut Cutting rings 7 7410 Dado di serraggio Anellino tagliente Pagina / Page 3 4 5 Male stud couplings Male stud elbow 7430 7450 7460 Terminale diritto