push-to-connect fittings system LF3000

Transcription

1 legris products are available from: MARYAD MTRIS push-to-connect fittgs system 3000 Order from: Maryland Metrics ph. (800) fx. (800)87-939

2 prciple of system 3000 legris products are available from: MARYAD MTRIS Invented and launched by egris 1969, the 3000 system has become universally adopted. It has been designed usg a simple and widely proven operatg prciple which allows stant connection. The connection of tube to fittg is made by simply pushg the tube to the fittg, no other operation is required. Disconnection is similarly stantaneous. Attentive to market needs, egris has taken to account the requirements of its customers, i.e. optimization of performance, miaturization, and appearance.in order to be utilized to its maximum capability, the 3000 system is available 3 ranges: - for fractional ch tubes with PT threads. - for fractional ch tubes with BSP threads taper form. - for metric tubes with BSP threads taper, parallel or metric form. Millions of fittgs are service throughout the world. Designed for pneumatic stallations, the 3000 system is therefore an essential component a wide variety of dustries. suitable fluids compressed air technical specifications Reliable performance is dependent upon the tube beg used, ambient temperature and fluid conveyed together with the component materials of the fittg. wor pressure 90 psi maximum for 3000 grippg rg (60 psi maximum for 3000 collet technology) Maximum circuit pressure depends equally on the type and diameter of the tube used. See hapter on egris tubg. or use on very low pressures, please consult us. staless steel grippg rg polypropylene push button wor temperature -40 to +175, 3000 grippg rg (-40 to 155, 3000 collet technology) The fittg s suitability depends equally on the type and OD of the tube used. or temperatures above 175, please consult us. engeered composite body (reforced nylon) nitrile D seal sealg O rg on BSPP threads, and thread sealant on PT & BSPT threads vacuum capability materials of construction vacuum of 8" g (99% vacuum) body: glass reforced nylon 6.6 collar: nylon grippg rg: staless steel D seal: nitrile O rgs: nitrile base: nickel-plated brass with thread sealant on tapered components and captive seal on parallel threads collet: brass (found only collet technology fittgs) All items the 3000 range are guaranteed SIIO R maximum tighteng torque for 3000 fittgs: PT & BSPT taper thread. lb parallel thread 10/3 1/8" 1/4" 3/8" 1/" M3 M5 M7 1/8" 1/4" 3/8" 1/" x0.5 x0.8 x1. lb A Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

3 legris products are available from: MARYAD MTRIS advantages of system 3000 grippg rg technology 1/8", 5/3", 1/4", 5/16", 3/8", 1/", 4, 6, 8, 10, 1, 14 collet technology 3/16" performance and reliability full flow: as grippg and sealg with the fittg is achieved usg the outside of the tube without deformation, there is no flow restriction. Smallest orifice side the fittg is = or > than the ID of the tube. automatic sealg: the D seal with the fittg provides a positive seal on the O.D. of the tube, both static and dynamic positions, due to an optimized design of the fittg cavity. ternal hex: allows ease of assembly tight places. one of the most extensive ranges on the market a solution for all applications: wide variety of body designs and numerous configurations, from 1/8" to 1/" and 3 to 14 diameters. types of thread: PT, BSP taper, BSP parallel and metric. special items on request. compact and aesthetic optimized dimensions and new body designs, to satisfy the ergonomics and aesthetics of pneumatic stallations. orientable at base ease of assembly no over/under torqug lightweight a feature troduced for improved performance, mobility and productivity. iediate seal of threads for tapered threaded fittgs, due to pre-applied teflon thread sealant. for parallel threaded fittgs, due to a patented built captive O rg seal. Our production process cludes dividual unit quality control and datg, for all 3000 push-to-connect fittgs, order to guarantee their quality and traceability. Simply push the tubg until it can go no further. oldg and sealg is accomplished stantaneously. stant connection and disconnection stant connection and disconnection without the use of tools. time savg 1 piece fittg reusable irst depress the manual release button, then pull the tubg out of the fittg. release caps: available 6 colors, to identify different circuits. ittgs come standard with a black push button. Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A3

4 legris products are available from: MARYAD MTRIS the complete range of 3000 push-to-connect fittgs threaded fittgs taper Page A6 U/taper Page A metric Page A metric/parallel Page A taper Page A8-A metric/parallel Page A9 319 taper Page A U/parallel Page A taper Page A11 U/parallel Page A11 taper Page A1-A13 taper Page A1 metric/parallel Page A13 taper/u Page A14 parallel Page A14 taper Page A U/parallel Page A taper Page A16 parallel Page A16 taper Page A17 parallel Page A taper Page A parallel Page A taper Page A parallel Page A taper Page A U/parallel Page A parallel Page A 3149/3049 taper/parallel Page A 3119 parallel Page A 3159 oscillatg, taper Page A oscillatg, parallel Page A43 tube to tube fittgs Page A3 Page A3 Page A4 Page A4 Page A5 Page A Page A Page A6 bulkhead connector fittgs /3136 Page A7 Page A7 taper/parallel Page A Page A Page A8 connectors Page A9 Page A Page A9 plug- fittgs Page A30 Page A30 Page A30 Page A31 Page A31 Page A3 Page A3 plug- accessories Page A3 Page A33 Page A Page A34 Page A34 A4 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

5 legris products are available from: MARYAD MTRIS the complete range of 3000 push-to-connect fittgs manifolds /03 Page A36 Page A36 Page A36-A Page A37 Page A37 Page A Page A Page A37 multi-connectors and d rail connectors 3300 Page A Page A35 Page A Page A39 Page A39 Page A39 modular fittgs Page A0 Page A0 Page A0 parallel Page A1 parallel Page A1 parallel Page A1 354 parallel Page A1 self-sealg fittgs taper Page A40 parallel Page A40 Page A taper Page A40 Page A40 accessories Page A clip 3110/3330 Page A43 Page A43 Page A44 Page A44 Page A44 Page A44 Page A Page A45 carstick 3100 Page A47 mi ball valves page A41 parallel Page A taper Page A Page A parallel Page A41 3 threaded fittgs Page A49 Page A49 Page A49 Page A49 Page A49 Page A49 3 tube to tube fittgs Page A50 Page A50 Page A50 Page A50 Page A50 The 3000 system can be used for: ch tubes, from 1/8 to 1/ PT, U, and BSP taper threads metric tubes, from 3 to 14 BSP taper, BSP parallel, and metric threads Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A5

6 male connector legris products are available from: MARYAD MTRIS 3175 male connector fractional ch tube to male PT nickel-plated brass pre-applied thread sealant male connector metric tube to male BSPT 1 nickel-plated brass pre-applied thread sealant 1 1 PT male connector fractional ch tube to male BSPT nickel-plated brass pre-applied thread sealant 1 1/8 1/ /8 1/ /8 1/ /3 1/ / /3 1/ / /16 1/ /16" 1/ /16 1/ /16" 5/ /4 1/ / /4 1/ / /4 3/ / /16 1/ / /16 1/ / /16 3/ / /8 1/ / /8 1/ / /8 3/ / /8 1/ / / 1/ / / 3/ / / 1/ / BSPT 4 R1/ R1/ R3/ R1/ R1/ R3/ R1/ R1/ R1/ R3/ R1/ R1/ R1/ R3/ R1/ R1/ R3/ R1/ R3/ R1/ BSPT 1 1/8 R1/ /3 R1/ /3 R1/ /16 R1/ /16" 1/8" /16 R1/ /16" 5/3" /4 R1/ /4 R1/ /16 R1/ /16 R1/ /16 R3/ /16 R1/ /8 R1/ /8 R3/ /8 R1/ / R1/ / R3/ / R1/ A6 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

7 male connector legris products are available from: MARYAD MTRIS 3171/3181 male connector fractional ch and metric tube to 10-3 U, M5 or M7 nickel-plated brass, with O rg seal O.D. U 1/ / / /4 M /4 M fractional ch M7 metric 4 M7X M7X Recomended for use with compact high flow valves. Because of the miature bodies, these fittgs can be placed close together. The mimum distance between centers of the fittgs is 10.5 (0.41") male connector metric tube to male PT 3101 male connector metric tube to male BSPP, M3, M5, or M7 nickel-plated brass, with O rg seal Their ternal hexagon and circular external shape ensure that models 3171 and 3181 provide highly compact assembly. By usg an Allen key, they can be stalled close proximity without the need to use a wrench. nickel-plated brass 1 1 PT 4 1/ /64" / /64" / / / /16" / /4" / /4" / / / / / BSPP/ metric 1 3 M3x M5x M3x M5x M7x / / M5x M7x M10x M1x / / / / M10x M1x / / / / / / / / / / / / Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A7

8 male elbow legris products are available from: MARYAD MTRIS 3109 male elbow fractional ch tube to male PT or U , nickel-plated brass base, pre-applied thread sealant on tapered threads Ø Ø male elbow metric tube to male BSPT positiong purposes, nickel-plated brass base, pre-applied thread sealant male elbow fractional ch tube to male BSPT Ø positiong purposes, nickel-plated brass base, pre-applied thread sealant positiong purposes PT/U 1/ /8 1/ /8 1/ /8 1/ / /3 1/ /3 1/ /16 1/ / /4 1/ /4 1/ /4 3/ /16 1/ /16 1/ /16 3/ /8 1/ /8 1/ /8 3/ /8 1/ / 1/ / 3/ / 1/ BSPT 4 R1/ R1/ R3/ R1/ R1/ R3/ R1/ R1/ R1/ R3/ R1/ R1/ R1/ R3/ R1/ R1/ R3/ R1/ R3/ R1/ BSPT 1/8 1/ /3 1/ /3 1/ /16 1/ /16 1/ /4 1/ /4 1/ /16 1/ /16 1/ /16 3/ /16 1/ /8 1/ /8 3/ / 1/ / 3/ / 1/ We recoend the use of an extra-flat wrench. A8 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

9 male elbow legris products are available from: MARYAD MTRIS male elbow metric tube to male PT, nickel-plated brass base, pre-applied thread sealant male elbow metric tube to BSPP, M3, M5 or M7 with O rg seal, nickel-plated brass base Ø Ø positiong purposes positiong purposes PT 4 1/ / / / / / / / / / / / BSPP/ metric 3 M3x M5x M3x M5x M7x / / M5x M7x M10x M1x / / / / M10x M1x / / / / / / / / / / / / We recoend the use of an extra-flat wrench. We recoend the use of an extra-flat wrench. emale elbows, with PT and BSPP threads, can be found on page A18. egris offers a solution for all tubg configurations. Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A9

10 extended male elbow legris products are available from: MARYAD MTRIS 319 extended male elbow fractional ch tube to male PT 319, nickel-plated brass base, pre-applied thread sealant extended male elbow metric tube to male BSPT Ø positiong purposes, nickel-plated brass base, pre-applied thread sealant Ø PT 1/8 1/ /8 1/ /3 1/ /3 1/ /4 1/ /4 1/ /4 3/ /16 1/ /16 1/ /8 1/ /8 1/ /8 3/ BSPT 4 R1/ R1/ R1/ R1/ R1/ R1/ R3/ R1/ R3/ R1/ R1/ R3/ R1/ R3/ R1/ positiong purposes 319 is designed to allow very close assembly with 3109 male elbow extended male elbow U, BSPP, M5, or M7 with O rg seal, nickel-plated brass base U fractional ch 1/ / / /4 M Ø positiong purposes metric BSPP/ metric 4 M5x M7x / / M5x M7x / / / / / / / / / / / / / A10 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

11 45 degree male elbow legris products are available from: MARYAD MTRIS 3133/ male elbow fractional ch tube to male PT or U, nickel-plated brass base, pre-applied thread sealant on tapered threads Ø U/PT 1/ /8 1/ /4 1/ /4 1/ /4 M /8 1/ /8 3/ positiong purposes male elbow metric tube to male BSPT, nickel-plated brass base, pre-applied thread sealant Ø BSPT 4 R1/ R1/ R1/ R1/ R1/ R3/ R1/ R3/ R1/ R1/ R3/ R1/ positiong purposes Prevents excessive angular loads on tubg which can cause k and distortion of the tube male elbow metric tube to male BSPP or M5 with O rg seal, nickel-plated brass base Ø positiong purposes BSPP/ metric 4 M5x / M5x / / / / / / / / / / / egris offers a solution for all tubg configurations. Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A11

12 male branch tee legris products are available from: MARYAD MTRIS 3108 male branch tee fractional ch tube to male PT or U to tube 3108, nickel-plated brass base, pre-applied thread sealant on tapered threads male branch tee metric tube to male BSPT to tube Ø Ø, nickel-plated brass base, pre-applied thread sealant positiong purposes positiong purposes O.D. U/PT 3008 female branch tee fractional ch tube to PT, nickel-plated brass base positiong purposes 1/ /8 1/ /8 1/ /8 1/ / /3 1/ /3 1/ /16 1/ /4 1/ /4 1/ /4 3/ /16 1/ /16 1/ /16 3/ /8 1/ /8 1/ /8 3/ /8 1/ / 1/ / 3/ / 1/ BSPT 4 R1/ R1/ R1/ R1/ R1/ R1/ R3/ R1/ R3/ R1/ R1/ R3/ R1/ R3/ R1/ PT 1/8 1/ /3 1/ /3 1/ /4 1/ /4 1/ /16 1/ /16 1/ /8 1/ / 3/ We recoend the use of an extra-flat wrench. We recoend the use of an extra-flat wrench. thread sealant All taper threaded 3000 male fittgs are supplied with a teflon pre-applied thread sealant for iediate stallation and re-use. A1 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

13 male branch tee legris products are available from: MARYAD MTRIS male branch tee fractional ch tube to male BSPT to ch tube, nickel-plated brass base, pre-applied thread sealant male branch tee metric tube to BSPP or M5 to tube complete with O rg seal, nickel-plated brass base Ø positiong purposes male branch tee metric tube to male PT Ø positiong purposes, nickel-plated brass base, pre-applied thread sealant Ø positiong purposes BSPT 1/8 1/ /3 1/ /3 1/ /16 1/ /16 1/ /4 1/ /4 1/ /16 1/ /16 1/ /16 3/ /8 1/ /8 3/ / 1/ / 3/ We recoend the use of an extra-flat wrench. PT 4 1/ / / / / / / / / / / / We recoend the use of an extra-flat wrench. M5/ BSPP 4 M5X / / M5X / / / / / / / / / / / / / We recoend the use of an extra-flat wrench. Identification the part numbers have been chosen by a method of mnemonics. ach 3000 fittg is identified by: its series the diameter of passage through the fittg by the thread code or second tube diameter type of fittg xample O.D. of tube thread code or second tube O.D. Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A13

14 male run tee legris products are available from: MARYAD MTRIS male run tee fractional ch tube to tube to male PT or U, nickel-plated brass base, pre-applied thread sealant on tapered thread 1 1 Ø Ø, nickel-plated brass base, pre-applied thread sealant positiong purposes 1 Ø PT/U male run tee metric tube to tube to male BSPT positiong purposes male run tee metric tube to tube to male BSPP or M5 complete with O rg seal, nickel-plated brass base positiong purposes 1/ /8 1/ /8 1/ / /3 1/ /3 1/ /16 1/ /4 1/ /4 1/ /4 3/ /16 1/ /16 1/ /16 3/ /8 1/ /8 1/ /8 3/ /8 1/ / 1/ / 3/ / 1/ BSPT 4 R1/ R1/ R1/ R1/ R1/ R1/ R3/ R1/ R3/ R1/ R1/ R3/ R1/ R3/ R1/ BSPP 4 M5x / / M5x / / / / / / / / / / / / / We recoend the use of an extra-flat wrench. We recoend the use of an extra-flat wrench. M5/ We recoend the use of an extra-flat wrench. 1 1 A14 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

15 male standpipe legris products are available from: MARYAD MTRIS 311 male standpipe PT fractional ch nylon probe, nickel-plated brass base, pre-applied thread sealant 3131 male standpipe 10-3 U fractional ch 1 nylon probe, nickel-plated brass base with sealg washer 1 PT 5/3 1/ /3 1/ /4 1/ /4 1/ /16 1/ /16 1/ /8 1/ /8 1/ /8 3/ / 3/ / 1/ U 5/ male standpipe BSPT metric nylon probe, nickel-plated brass base, pre-applied thread sealant 1 1 male standpipe BSPP or M5 metric nylon probe, nickel-plated brass base with sealg washer BSPT 1 4 R1/ R1/ R1/ R1/ R1/ R1/ R3/ R1/ R3/ R1/ R3/ R1/ R1/ M5/ BSPP 4 M5x / / / / / / / / / / / / / / Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A15

16 threaded Y connector legris products are available from: MARYAD MTRIS 3148 Y male fractional ch tube to PT nickel-plated brass base pre-applied thread sealant PT 5/3 1/ /3 1/ /4 1/ /4 1/ /8 1/ /8 3/ positiong purposes 3148 Y male metric tube to BSPT nickel-plated brass base pre-applied thread sealant positiong purposes BSPT 4 R1/ R1/ R1/ R1/ R1/ R1/ R3/ R1/ R3/ R1/ R3/ R1/ Y male metric tube to BSPP or M5, nickel-plated brass base, with O rg seal positiong purposes M5/ BSPP 4 M5x / / M5x / / / / / / / / / / All 3000 fittgs with BSPP and M5 threads are supplied complete with an tegral O rg seal. This permits stant assembly of the fittg, without preparation of the thread, and provides a fixed assembled height to the fittg. A16 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

17 legris products are available from: MARYAD MTRIS threaded double Y connector 311 double Y male metric tube to BSPT nickel-plated brass base, pre-applied thread sealant M P T BSPT 4 R1/ R1/ R1/ R1/ ØT P P M positiong purposes 313 double Y male metric tube to BSPP, nickel-plated brass base, with O rg seal M P T BSPP 4 1/ / / / ØT P P M positiong purposes egris packagg boxes ensure perfect protection of products. They are designed to answer the user s requirements, with: iediate visual identification - each model has clear mar which dicates the part number and the correspondg technical drawg. easy storage a bar code an impregnable system of openg/closg recyclable material Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A17

18 female elbow legris products are available from: MARYAD MTRIS 3009 female elbow fractional ch tube to PT 319 female elbow metric tube to BSPP, nickel-plated brass base Ø positiong purposes straight female connector 3014 straight female connector fractional ch tube to PT 3114, nickel-plated brass base nickel-plated brass straight female connector metric tube to BSPP or M5 O.D. nickel-plated brass Ø positiong purposes PT 1/8 1/ /3 1/ /3 1/ /4 1/ /4 1/ /16 1/ /16 1/ /8 1/ / 3/ BSPP 4 1/ / / / / / / / / / / / / PT 1/8 1/ /8 1/ /3 1/ /3 1/ /16 1/ / /16 1/ / /4 1/ /4 1/ /16 1/ /16 1/ /8 1/ /8 1/ /8 3/ / 3/ / 1/ M5/ BSPP 4 M5x / / / / / / / / / / / / / A18 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

19 sgle banjo legris products are available from: MARYAD MTRIS 3018 banjo fractional ch tube to PT, nickel-plated brass base, pre-applied thread sealant 1 PT 5/3 1/ /4 1/ /4 1/ /4 3/ /8 1/ /8 3/ Ø 3018 banjo metric tube to BSPT, nickel-plated brass base, pre-applied thread sealant 3118 banjo fractional ch tube to 10-3 U 1 screwdriver slot 1 Ø, nickel-plated brass bolt complete with sealg O rg 1 BSPT 4 R1/ R1/ R1/ R1/ R1/ R3/ R1/ R3/ R1/ R3/ R1/ U 1/ * / * / * *with screwdriver slot 1 Ø 3118 banjo metric tube to BSPP, M3 or M5, nickel-plated brass bolt complete with sealg O rg 1 Ø 1 BSPP/ metric 3 M3x * M5x * M5x * / M5x * / / / / / / / / / / *with screwdriver slot egris banjos allow easy access, even when connections are close together. Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A19

20 legris products are available from: MARYAD MTRIS banjo bodies for modular construction By stac and 3 compact bodies on top of each other usg one bolt, a wide range of permutations of fittgs, modules and manifolds can be constructed. Between to 6 outlets one modular construction are possible; the tube diameters may be different or the same. Wide flexibility the creation of fittgs to meet the personalized requirements of the end user sgle banjo bodies metric double banjo bodies metric M5/BSPP 1 3 M5x M5x / M5x / / / / / / / / / / M5/BSPP 4 M5x / / / / / / tw banjo bodies metric M5/BSPP J 4 M5x / / / / / / / / This model allows two outlets to be on the same side and to run parallel to each other. A0 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

21 legris products are available from: MARYAD MTRIS sgle, double and triple bodied banjo bolts with full passage for modular construction 357 sgle banjo bolts BSPP or M5 brass stem with o-rg seal 1 BSPP/ M5 M5x * / / / / * With screwdriver slot full bore 358 stac banjo for body high modules BSPP or M5 brass stem with o-rg seal BSPP/ 1 M5 M5x * / / / * With screwdriver slot Designed for use with banjo bodies. full bore 359 stac banjo for 3 body high modules BSPP brass stem with o-rg seal 1 BSPP 1/ / / Designed for use with 3 banjo bodies. full bore 354 female threaded banjo bolts BSPP or M5 brass stem with o-rg seal 1 BSPP/ BSPP/ M5 M5 M5x0.8 M5x /8 1/ /4 1/ /8 3/ / 1/ full bore The range of banjo bolts and 354 is only useable association with the correspondg bodies for modular construction and 3549 Thread bore for part numbers, 357, 358, 359, and 354 D M5x0.8 1/8 1/4 3/8 1/ D Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A1

22 banjo with female bolt legris products are available from: MARYAD MTRIS rugged construction provided by steel bolt and robust body Instant stallation with parallel thread and tegral O rg seal Specification cludes: parallel and metric threads with an tegral O rg seal offer the same advantages as those found on male fittgs; stant assembly, security and consistent assembled height. compactness and low profile for better space utilization and accessibility. full flow, equivalent to the size of male elbows, and robust construction utilizg a steel bolt. high flow resultg from the bolt design 314 low profile resultg from compact body and bolt Thread M3x0.5 M5x0.8 1/8" 1/4" 3/8". lb banjo with female BSPP bolt metric tube to M5 or BSPP with o-rg seal, nickel-plated brass bolt BSPP/M5 1 4 M5x / / / / tw banjo tube to PT, U, BSPP or M5 with o-rg seal, nickel-plated brass bolt double banjo metric tube to BSPP or M5 1 Ø * with screwdriver slot with o-rg seal, nickel-plated brass bolt * With screwdriver slot This is a useful component allowg: the mountg of function fittgs (sensors, flow controls and pressure reducers). the tappg off of a pneumatic supply from a pneumatic cylder. U/ PT fractional ch 5/ /3 1/ /4 1/ /4 1/ /8 1/ /8 3/ BSPP/M5 metric 4 M5x * / / / / / / This fittg provides parallel outlets on the same side. 1 BSPP/M5 4 M5x * / / / / / / A Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

23 legris products are available from: MARYAD MTRIS straight union tube to tube 3106 union fractional ch tube to tube Ø 1/ / / / / / / unequal union fractional ch tube to tube 1 Ø 1 1/8 5/ /8 1/ /3 1/ /4 5/ /8 1/ /8 1/ union metric tube to tube Ø unequal union metric tube to tube 1 Ø 1 Ø converters metric to fractional ch / / / Ø 1 Ø the advantages of legris.com Download AD drawgs of all 3000 models from the onle catalog of legris.com. ormats (D and 3D) are compatible with prcipal worldwide AD platforms. A free service available to everyone. Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A3

24 union elbow tube to tube legris products are available from: MARYAD MTRIS 310 union elbow fractional ch tube to tube 310 unequal union elbow fractional ch tube to tube Ø 1 Ø 1/ / / / / / / /8 1/ /3 1/ /8 1/ /8 1/ union elbow metric tube to tube Ø unequal union elbow metric tube to tube Ø A4 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

25 union tee tube to tube legris products are available from: MARYAD MTRIS 3104 tee fractional ch tube to tube to tube 3104 unequal tee fractional ch tube to tube to tube Ø Ø tee metric tube to tube to tube Ø Ø 1 unequal tee metric tube to tube to tube 1 1/ / / / / / / /8 1/ /3 1/ /4 1/ /4 5/ /4 3/ /8 1/ /8 1/ / 1/ / 3/ tube to tube fittgs can be fitted multiple strips by the use of egris tube clips please refer to page A44. Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A5

26 union Y tube to tube legris products are available from: MARYAD MTRIS 3140 Y fractional ch tube to tube 1 1 1/8 1/ /3 5/ /4 1/ /16 5/ /8 3/ /8 1/ /3 1/ /4 3/ /8 1/ Y metric tube to tube double Y fractional ch tube to tube /3 5/ /3 1/ M P T Ø T P P M 3144 multiple Y metric tube to tube 1 Ø T P P 1 M P T M A6 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

27 legris products are available from: MARYAD MTRIS bulkhead connector fittgs 3116 bulkhead union tube to tube 1 max fractional ch 1/ lb.. 5/ lb.. 1/ lb.. 5/ lb.. 3/ lb.. 1/ T m Max Torque / mixed bulkhead connector metric tube 3 and nickel-plated brass 1 equal bulkhead elbow tube to tube 1 Ø 1 1 ØT Ø T Ø T metric The plastic nut is fitted with an O rg to optimize sealg relation to the panel T max m The plastic nut is fitted with an O rg to optimize sealg relation to the panel. female bulkhead connector tube to PT or BSPP and nickel-plated brass T max m PT fractional ch 1/8 1/ /3 1/ /3 1/ /4 1/ /4 1/ /8 1/ /8 3/ max max T m metric Ø T The body is orientable for positiong purposes The plastic nut is fitted with an O rg to optimize sealg relation to the panel. T m BSPP metric 4 1/ / / / / / / / / / fractional ch 1/ / / / / / Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A7

28 plug- bulkhead union legris products are available from: MARYAD MTRIS 3156 plug- bulkhead union fractional ch tube to tube 1 mi 1 Ø maxi 4 Ø T T m 5/ / / / / ittgs are supplied complete with collar. One removal tool comes each 3156 box. 1 To facilitate color codg, please refer to page A45 for details of egris colored release caps. stallation removal 1. mark out the fixg hole. 1. disconnect the tube.. make hole panel. 3. simply push the fittg to place.. put the removal tool on the fittg. 4. to complete the stallation. 3. push the tool over the fittg to the bulkhead face. 5. to identify circuits simply remove the black release button and replace with colored one. 4. simply remove the fittg. 5/3 1/4 5/16 3/8 1/ Mimum distance between fittgs. Diameter of fixg hole. ø T ches 5/8" 3/4" 7/8" 1 1/8" 1 1/4" ØT tolerance ØT : A8 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

29 legris products are available from: MARYAD MTRIS multiple connection manifolds multiple tee with mountg holes 1 Ø T 1 Ø T M ØT Ø 1 double multiple tee with mountg holes equal cross 1 1 unequal cross metric M Ø Ø Ø1 ØT 1 In pneumatic stallations manifoldg is a popular way of preparg the stallation of pneumatic equipment. egris multiple tees, a recent addition to the 3000 range, provide the ideal way of creatg this manifold and with the careful use of other components the range allow the system to be plumbed as it is built. are has been taken to ensure that flow through the ma body of the manifold is adequate to feed the secondary les. Incorporation of the multiple tee can enable a very cost effective circuit design to be achieved. 1 fractional ch 1/4 5/ * /4 1/ * /16 5/ /8 1/ *collet technology 1 metric ØT = I.D. of fixg hole 1 fractional ch 5/ / / ØT = I.D. of fixg hole * * This model provides outlets 1 of equal diameters and outlets of a different diameter. * This model provides 3 outlets 1 of equal diameters and 1 outlet of a different diameter. ØT = I.D. of fixg hole A9 1 1 M T T T fractional ch 1/4 5/ /4 1/ /16 5/ /8 1/ metric metric Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) M T T

30 plug- fittgs legris products are available from: MARYAD MTRIS 318 plug- elbow fractional ch 318 plug- elbow metric Ø 1 1 Ø /8 1/ /3 5/ /3 1/ /4 1/ /4 3/ /16 5/ /8 3/ / 1/ extended plug- elbow 45 plug- elbow Ø fractional ch 1/8 1/ /3 5/ /4 1/ /16 5/ /8 3/ metric fractional ch 1/8 1/ /3 5/ /4 1/ /16 5/ /8 3/ metric A30 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

31 plug- fittgs legris products are available from: MARYAD MTRIS 3188 plug- tee fractional ch 1 1 5/ / / Ø plug- tee metric 1 Ø plug- run tee fractional ch Ø 1 5/ / / plug- run tee metric Ø egris plug- fittgs also offer solutions for small spaces and system design by the use of cartridges. or details of egris arstick - an novative, modern cartridge assembly - please refer to page A47. Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A31

32 plug- fittgs legris products are available from: MARYAD MTRIS 314 plug- Y fractional ch /8 1/ /3 5/ /16 5/ plug- Y metric plug- multiple Y metric alumum tail piece this model comprises one let () and two equal outlets (1) 1 1 M 1 P this model comprises one let () and four equal outlets (1) P P M 310 double male union fractional ch double male union metric 1 1 5/ / * / / / / * *nickel-plated brass A3 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

33 plug- fittgs legris products are available from: MARYAD MTRIS 3166 reducer fractional ch 3166 reducer metric nylon 1 Ø nylon 1 Ø 3168 expander fractional ch nylon /8 5/ /8 3/ /8 1/ /3 3/ /3 1/ /3 5/ /3 3/ * /16 5/ /16 1/ /4 5/ /4 3/ /4 1/ /16 3/ /16 1/ /8 1/ * metal body /4 1/ / /4 5/ /4 3/ /8 1/ Ø expander metric nylon Ø converter fractional ch to metric nylon / / Ø 1 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A33

34 plug- fittgs legris products are available from: MARYAD MTRIS 316 plug fractional ch nylon 1 Ø 1/ / / / / / / plug metric nylon 1 Ø barbed connector fractional ch 1 nylon / / /4 3/ * / / / *nickel-plated brass dimensions for are I.D. of the tube. 31 barbed connector metric 1 nylon * *nickel-plated brass A34 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

35 legris products are available from: MARYAD MTRIS connectors for DI rail profile or These components are similar prciple to the electrical connectors found control panels and used to rationalize cablg and trouble shootg. Used alongside electrical connectors egris DI rail connectors provide similar facilities for pneumatic pipework, and are mounted on the same rail profile which allows electrics and pneumatics to run side by side. All tube connections are egris push- fittgs for plastic tubg. identification and trouble shootg Tube identification hannels or slots for labels are to be found on the front faces of these connectors which allows air le tubes to be coded and identified to assist trouble shootg channels are for preformed labels or flat labels detail of test pot connector for tubes le 45 Test pot facility Beg able to detect the presence of air is an important consideration when matag pneumatic control systems. egris DI rail connectors corporate test pots which pop out after beg manually depressed, dicatg the presence of air the pipe. fractional ch 5/ / metric fixed by clippg 3381 connector for 3 tubes fractional ch 5/ / metric fixed by clippg Wor pressure of models 3379 and 3381 : 15 to145 psi Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A35

36 modular manifolds legris products are available from: MARYAD MTRIS Rugged construction, anodized alumum fish, this manifold offers connection solutions for a wide range of pneumatic applications. Modular version with threaded or 3000 push- connection. 3 connector modules 8 connections for 5/3" or 4 tubg 4 connections for 1/4" tubg 4 connections for 1/8" PT 3301 manifold module threaded or push- 1 Use 6-3 or M3 x 0 socket head screws for mountg module. 4 port blocks sgle port block - 1/4" PT side entry tubg sgle port block - 1/4" PT rear entry connection double port block - 3/8" PT side entry connection triple port block - 3/8" PT side entry connection1 blan end 3 connector modules 8 Monobloc for 5/3" or 4 tubg 4 connections for 1/4" tubg 4 connections for 1/8" PT fractional ch 1 5/3 or / M / W W1 W M threaded entry sgle port block side entry rear entry 1 1 PT 1/ Side entry thread / Rear entry thread double port block with 3/8" PT side entry 1 PT 1 3/ A36 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

37 modular manifolds legris products are available from: MARYAD MTRIS triple port block with 3/8" PT side entry M M 1 PT 1 3/ M 3303 blan end monobloc manifold with threaded or 3000 push-to-connect ports fractional ch OD PT 5/3" O.D. 1/ /4" O.D. 1/ /8" PT 1/ / / / W W1 W mountg bracket W W manifold with 3000 push-to-connect ports fractional ch anodized alumum 1.0 Ø.18.0 umber 1 PT of outlets 1/8 1/ /3 1/ /4 1/ /8 3/ dimensions are ches manifold with 3000 push-to-connect ports metric anodized alumum Ø umber of outlets 1 BSPP 4 1/ / / / / dimensions are Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A37

38 modular plug- connector legris products are available from: MARYAD MTRIS standard assembly offset assembly The modular construction of this component allows a number of pneumatic tubes to be connected or separated with a simple plug- action. A series of male/female connectors provide a leakproof jot. Units of any length can be constructed and all connections are for 5/3" (4 ) O.D. tube. The two coon uses for this product are: 1. ixg one half to a panel, mache or bulkhead and allowg the floatg half to be assembled or disconnected to change a mache or sequence. Often when maches are transported air les are separated and this connection provides a foolproof method of reconnection on site.. Usg the connector an -le mode for jog long lengths of pipe-work which need to be disconnected periodically. It is advisable to limit the unit length to five connectors as illustrated the photograph below. personalization of connector By reversg the slices of the module durg their assembly it is possible to offset units so that they cannot be mixed or advertently connected the wrong order. components used the module assembly The module is constructed from a number of syetrical components each of which must mate with another similar component the other half of the couplg. When fully assembled one box of the modular plug- connector provides 0 x 4 tube connections. 10 one half and 10 matg ones the other. The complete box contas: 10 units each contag two 5/3" (4) connections 0 jog ps and 4 end ps 4 mountg brackets 4 couplg clips 1 dismantlg tool 3300 modular plug- connectors A B 1 1 M 5/3, /16, fixg dimensions 1 1 B clearance hole for Ø3 screw 0.5 A x 0.5 A38 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

39 3000 multi-connector legris products are available from: MARYAD MTRIS The egris multi-connector is designed for simultaneous connection and disconnection of 7 and 1 tubes. Its 3000 technology and performance makes it easy to use : - stant connection and disconnection, without tools, - full flow, without restriction. In order to facilitate the stallation, each tube outlet is numbered. A location p avoids assembly errors and a cap helps to guide the tubes and to protect connections. To cover all users' needs, this range can also be used for bulkhead connections. Please consult us for customized versions, cludg connectors with tegral shut-off valves and metric sizes. 330 male screw body fractional ch plastic number 1 1 of outlets 1/ M46x1.5 M40x / M65x1.5 M58x / M46x1.5 M40x / M65x1.5 M58x / M65x1.5 M58x / M7x1.5 M65x / M65x1.5 M58x The number of male body outlets must correspond to the same number of outlets on the female body..g. Model must only be connected to model female screw body fractional ch screw cap plastic plastic Ø number 1 1 of outlets 1/ M46x1.5 M40x / M65x1.5 M58x / M46x1.5 M40x / M65x1.5 M58x / M65x1.5 M58x / M7x1.5 M65x / M65x1.5 M58x The number of female body outlets must correspond to the same number of outlets on the male body..g. Model must only be connected to model number 1 of outlets 1/ M40x / M58x / M40x / M58x / M58x / M65x / M58x overall dimensions for bulkhead mountg. 56,5 maxi Ø ,5 1 number of outlets 1/ / / / / / / To complement the 3000 multi-connector, you will also fd a range of Multi bundled tubg on page M17 of the Tubes and oses section. Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A39

40 self-sealg fittgs legris products are available from: MARYAD MTRIS egris self-sealg fittgs enable circuits and machery to stay under pressure when beg checked and mataed. The wor process is simple: Prevents fluid flow when there is no tube connected. onversely, when connected, the compressed air flow is restored both directions. self-sealg male fittg PT or BSPT nickel-plated brass self-sealg plug- fittg metric 1 ØT nylon 1 nickel-plated brass ØT PT self-sealg male fittg metric tube to BSPP fractional ch 5/3 1/ /4 1/ /4 1/ /8 1/ /8 3/ BSPT metric 4 R1/ R1/ R1/ R1/ R3/ maximum wor pressure = 145 psi BSPP 4 1/ / / / / BSPP 4 1/ / / / / maximum wor pressure = 145 psi ØT ØT snap connector body PT This model prevents fluid flow -le when there is no tube connected; connectg the tube allows fluid flow. PT D 1/ / We recoend the use of this product for frequent connection/disconnection. More formation on page B35. orientable model 7960 snap connector plug fractional ch nylon D 1/ We recoend the use of this product for frequent connection/disconnection. More formation on page B35. A40 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

41 mi ball valves legris products are available from: MARYAD MTRIS /, with vent, with push-to-connect ports nickel-plated brass ball.94 5/ / / / metric /, with vent, with male PT thread and push-to-connect ports nickel-plated brass ball PT fractional ch fractional ch 5/3 1/ /4 1/ /4 1/ /16 1/ /16 3/ /8 1/ /8 3/ J J /, with vent, with male BSP parallel thread and push-to-connect ports nickel-plated brass ball BSPP J 1 metric 6 1/ / / / /, with push-to-connect ports nickel-plated brass ball.94 1 J fractional ch 5/ / / / metric /, with male BSP parallel thread and push-to-connect ports nickel-plated brass ball BSPP J 1 metric 6 1/ / / / To jo the mi ball valves together, use the clips on pg B17. or more formation on the mi ball valves, refer to pages B4 - B5. Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A41

42 3000 oscillatg fittgs legris products are available from: MARYAD MTRIS anti-friction washers egris oscillatg fittgs are designed to satisfy the requirements of dustrial automation and robotics. The oscillatg fittg features low-friction washers enablg the fittg to rotate conjunction with the stroke of the cylder piston.this prevents premature tube wear due to excessive flexg.the highly reliable technology used gives particularly long life expectancy on all stallations thus equipped. To achieve longevity of the tubg we advise that the tube is designed to move the same plane as the tube-exit from the fittg. We advise agast the use of recoil tubg. Technical specification The values this table are at 90 psi pressure and 70 temperature. O.D. tube torque m x 10 < < < < < maximum rotation speed radian/second oscillatg compact elbow fractional ch tube to PT, nickel-plated brass base with pre-applied thread sealant PT 5/3 1/ /4 1/ /4 1/ Ø 3159 oscillatg compact elbow metric tube to BSPT, nickel-plated brass base with pre-applied thread sealant Ø BSPT 4 R1/ R1/ R1/ R1/ R1/ R3/ R1/ R3/ R1/ R3/ R1/ A4 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

43 accessories legris products are available from: MARYAD MTRIS 3189 oscillatg compact elbow metric tube to BSPP or M5, nickel-plated brass base with sealg washer 011 double male adapters PT to BSPT brass Ø M5/ BSPP 4 M5x / M5x / / / / / / / / / PT BSPT 1/8 R1/ /4 R1/ /8 R3/ / R1/ /4 R3/ male/female adapters PT to BSPP PT brass BSPP PT BSPP 1/8 1/ /4 1/ /8 3/ / 1/ /4 3/ male/female adapters BSPT to PT BSPT brass PT BSPT PT R1/8 1/ R1/4 1/ R3/8 3/ R1/ 1/ R3/4 3/ A43 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A43

44 accessories legris products are available from: MARYAD MTRIS 0178 reducer male to female BSPP or M5 nickel-plated brass, with O rg seal 1 1 BSPP BSPP/M5 M7x1 M5x /8 M5x /4 1/ /8 1/ /8 1/ / 1/ / 3/ /4 1/ expander male to female BSPP 1 nickel-plated brass, with O rg seal 1 BSPP BSPP 1 M1x1.5 1/ /8 1/ /4 3/ /8 1/ threaded plug BSPP or M5 nickel-plated brass, with O rg seal 1 1 BSPP/M5 M5x M7x / / / / lip clip strips for tubg and fittgs Ø Ø 4-6 tube Ø 3000 to be clipped umber of clips per strip 5/3, 4 lip /4, 3/16, 6 lip /16, 8 5/3, 4 lip /8, 10 1/4, 6 lip /, 1 lip /16, 8 lip egris clips can be used to mount both tubg and fittgs. To order clips for tubg use the column O.D. tube. To order clips for mountg a fittg order by the 3000 to be clipped. lip strips are packaged quantities of 5, but ordered by dividual strip. They come complete with screws of 9.5 length. egris clips are also designed to fix 3000 fittgs series with a mimum of space. Supplied strips, clips can be separated by hand or with a tube cutter and enable the use of multiple clips, dependg on the users needs. A44 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

45 accessories legris products are available from: MARYAD MTRIS 3110/3330 caps/manual release button fractional ch O.D. TUB 1/8 5/3 3/16 1/4 5/16 3/8 1/ A A A A A A metric O.D. TUB In all sizes of the 3000 fittgs, except 3/16", the push button is an tegral part of the design which makes it non-removable, and comes standard black. or identification of the circuits, colored caps (p/n 3110) fit over the black push button. On the 3/16" sizes, the buttons are removable and can be replaced with a button of another color (p/n 3330). ive colors are available which allow color codg of the fittg, association with tubes of the same color disconnection tool B nickel-plated steel A - for disconnection at a face B - for disconnection between fittgs A 5/3", /4", /16", /8", /", In cases where access is difficult this tool can be useful, particularly if the standard release buttons have been removed. (Release buttons can only be removed on 3/16" sizes.) The 3000 system is designed for use with various types of tubg found this catalog: semi-rigid nylon tube flexible polyurethane tube low density polyethylene fluoropolymer tube 1/8" to 1/" O.D. page M7 1/8" to 1/" O.D. page M11 1/8" to 1/" O.D. page M15 1/8" to 1/" O.D. page M16 4 to 14 O.D. page M9 4 to 14 O.D. page M13 4 to 1 O.D. page M15 4 to 1 O.D. page M16 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A45

46 carstick legris products are available from: MARYAD MTRIS The arstick concept combes 3000 one-piece cartridges with a specially designed protection and dispensg sleeve. Ideal for contuous processes large quantities, it provides a performance solution for automatic, semi automatic and manual assembly equipment for pneumatic components. wor specifications release button (nylon) retag sleeve (nickel-plated brass except for 10 and 1) grippg rg (staless steel) protection sleeve (nylon) seal (nitrile) Advantages: assembly time savg, with complete safety - one piece cartridge, no risk of losg the seal - pre-greased and protected seal - self-centerg of the cartridge to half of its height with the cavity - protection agast contamants (dust, swarf...) throughout manufacture and assembly. tried and tested technology technical performance - automatic seal, full flow, vacuum capability. optimized dimensions suitable for automatic processes - automatic self alignment durg sertion - capable of combg dispensg and assembly closer mountg tolerances and shallow cavities suitable fluid wor pressure wor temperature vacuum compressed air to 90 psi maximum -4 to g arstick is designed for use with egris semi-rigid nylon and flexible polyurethane tubg. Assembly tool Depression of seal protection Seal locked to cavity Self-centerg up to half of the height of the cartridge artridge place Tube connection egris can also provide alternative designs such as: other types of seal (PDM, M ) other materials (staless steel sleeve ) Please ask for details. A46 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939

47 carstick : assembly legris products are available from: MARYAD MTRIS 3100 carstick cartridge O.D. ø cartridge 1/ /3, / /16, / ød 1/ /3, / /16, / cartridges per carstick cavity dimensions M m space between the axes ød1 ød 1 nylon cavity alumum cavity brass cavity M 1 M 1 1 1/ ± ± ± ± /3, / ± ± ± /16, ± ± ± / M ød /8 3.5 ± /3, ± / ± ± /16, ± ± / ± ± mache tool for cavity alumum and brass cavities high speed steel Ø 1/ shank 5/16 5/ /8 1/ / 5/ /16 3/ / assembly tool for carstick 1/ / / / / orce required for sertion () tube nylon cavity alumum cavity brass cavity 1/8" 675 lbf 675 lbf 675 lbf 5/3", lbf 675 lbf 675 lbf lbf 675 lbf 675 lbf 5/16", lbf 785 lbf 675 lbf 3/8", lbf 675 lbf 675 lbf lbf 900 lbf 900 lbf Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800) A47

48 legris products are available from: MARYAD MTRIS prciple and specifications of 3 push- fittgs Very small pneumatic stallations used many dustries have severe size and weight constrats, together with an absolute requirement for precision and reliability. The egris 3 stant fittg is the answer to such applications. Very small and lightweight, 3 push- fittgs are designed for highly compact space requirements. ntirely made of chemically nickel-plated brass (body and collet), this range is resistant to corrosive and aggressive environments. Its grippg prciple is based on that of egris push- fittgs: stant connection and disconnection, by hand and without any tool. A few examples of dustrial applications are: assembly of electronic components usg gripper feeds semi-conductor, tegrated circuit production usg miature cylders and valves manufacturg and assembly the textile and sewg dustries usg micro-pneumatic circuitry precision mechanics, such as dental equipment technical specifications Reliable performance is dependent upon the type of tube beg used, the wall thickness of the tube, ambient temperature and fluid conveyed together with the component materials of the fittg. nitrile O rg suitable fluids wor pressure compressed air 60 psi maximum. The maximum pressure of the circuit depends on the type of tube used. nylon tubg wor temperature from 5 to 160. The allowable wor temperature depends on the type of tube used. chemical nickel-plated body sprg collet materials of construction body: nickel-plated brass ternal seal: nitrile O rg thread seal: fluoropolymer collet: nickel-plated brass fluoropolymer washer tighteng torque for 3 fittgs 0.8 to 8. lb All items the 3000 range are guaranteed SIIO R A48 Order from: Maryland Metrics techfo@mdmetric.com ph. (800) fx. (800)87-939