Compression Fittings 34 Series Inch
|
|
- Jasmine Baldwin
- 6 years ago
- Views:
Transcription
1 4 Series /6" O/ l Wide range of types and sizes l Rugged and durable l Suitable for use under extreme conditions of pressure and temperature l Ideal for most general industrial applications Technical ata Medium: Compressed air*. *Consult our technical service for use with other fluids. Operating Pressure: The maximum working pressure is limited by the type of tubing being used. Operating Temperature: The maximum working temperature is limited by the type of tubing being used. Tube Sizes: /6",, /6", /8", /2", /8", O/. Ordering Information To order, quote appropriate product number from the tables on the following pages. Tubing: Nylon or 2 and other plasticised or unplasticised tubing which conforms to the tolerances specified in S 409: Part 976. Copper, annealed and halfhard to S 287: Part 2. ouble wall brazed steel. Materials rass to S 2874: 986 (CZ2) for tubing nut, sleeve and body manufactured from bar, brass to S 2872: 969 (CZ22) for body manufactured from stamping. anjo bolts have a bright nickel plated finish. 0/97 N/L
2 Straight Connectors and daptors STM TILPIC PTOR Tube stem to hose FML TILPIC PTOR Tube to hose STRIHT STM PTOR Tube stem to male taper SP thread 4 04 NIPPL STM CONNCTOR Male to stem 4 00 RUCIN CONNCTOR Female to male 4 02 ULKH CONNCTOR Female ULKH PTOR Female parallel SP thread to female Page Page Page Page Page Page Page NIPPL CONNCTOR Male UNQUL CONNCTOR Female to male STRIHT CONNCTOR Female RCKT STRIHT CONNCTOR Female MTRIC TO INCH PTOR Male to female NIPPL PTOR Male to male taper SP thread NIPPL PTOR Male to female parallel SP thread Page Page Page Page Page Page Page STRIHT ML PTOR Female to male taper SP thread STRIHT ML PTOR (NPTF) Female to male NPTF thread STRIHT ML PTOR Female to male parallel SP thread STRIHT PTOR Female to female parallel SP thread Page Page Page Page lbow Connectors and daptors UNIVRSL STM LOW Tube stem STM LOW CONNCTOR Female to stem LOW CONNCTOR Female RCKT LOW CONNCTOR Female FML LOW PTOR Female to female parallel SP thread ML LOW PTOR Female to male taper SP thread 4 00 ML LOW PTOR Female to male NPTF thread 6 0 Page Page Page Page Page Page Page ML LOW PTOR Female to male NPTF thread 4 0 HOS LOW PTOR Female to male parallel SP thread 4 08 Page Page Tee, Y and Four Way Connectors and daptors STM T CONNCTOR Female to stem STM T CONNCTOR Female to stem STM T CONNCTOR Female to stem SI STM T CONNCTOR Female to stem 4 04 T CONNCTOR Female RCKT T CONNCTOR Female FML T PTOR Female to female SP thread 4 0 Page Page Page Page Page Page Page SI T PTOR Female to female parallel SP thread 4 07 ML T PTOR Female to male taper SP thread 4 04 ML SI T PTOR Female to male taper SP thread 4 06 Y CONNCTOR Female RCKT Y CONNCTOR Female FOUR WY CONNCTOR Female 4 0 FOUR WY STM CONNCTOR Female to stem 4 04 Page Page Page Page Page Page Page N/L /97
3 Manifolds SINL SI MNIFOL 4 00 OUL SI MNIFOL Page Page ccessories FORM CUTTR TP 9 00 TUIN PLU Male thread ULKH LOCKNUT HOS CON LOCKNUT Female parallel SP thread 4 0 HOS SL Female 4 06 SLIN WSHRS For use with banjo fitting Page Page Page Page Page Page Page UNIVRSL TUIN SLV TUIN SLV TUIN NUT FOL COPPR WSHR ON WSHR Page Page Page Page Page /97 N/L
4 ssembly etails Compression Fittings Tubing Nut Tubing Sleeve ody Tube Stop Method of ssembly. nsure that the is cut square and is free from fraze. 2. Place the tubing nut and sleeve on the and push the into the fitting until it bottoms on the stop.. Holding the firmly in contact with the stop screw the tubing nut down finger tight and then tighten a further /4 full turns. Slacken off the assembly and then pinch down again. The method of preparation and assembly described will ensure leakproof joints over a wide pressure range, depending upon the size and type of tubing being used. Failure to follow this guide, or overtightening at any joint, will only lead to damage of the fittings or an unsatisfactory seal. Instructions For Machining Where for some reason, such as saving overall space, it is desired to dispense with the male adaptor and fit a, complete with its associated nut and sleeve, direct into a casting, this may be done as illustrated below, by machining the correct form and thread with the appropriate size of form cutter and tap.. RILL It is difficult to recommend specific drill sizes to suit our range of form cutters and taps without having detailed knowledge of the material to be machined and details of the particular installation. s a general rule, however, when preparing for an nots compression assembly, a drill size of mm less in diameter than the tubing size should be used, up to and including 8 mm. For larger tubing, a drill of approximately 2 mm less in diameter is recommended. 2. FORM The correct form cutter should be selected from the table overleaf for the outside diameter tubing being used.. TP The correct size thread tap should be selected from the table overleaf for the outside diameter tubing being used. Owing to the fine pitch of the threads used, only a plug tap is required. 4. SSMLY The, or stem fittings, with appropriate tubing nut and sleeve, can now be assembled into the port. We can advise on individual problems but we cannot be held responsible for failures due to nonobservance of the dimensions and tolerances which we lay down for these compression unions. N/L /97
5 Torque Figures Recommended torque using series sleeves O.. Nylon Half ouble wall & 2 hard brazed copper steel /8" 60 lbf in 0 lbf in 60 lbf in /8" 60 lbf in 80 lbf in 60 lbf in /8" 60 lbf in 80 lbf in 80 lbf in /8" 70 lbf in lbf in 0 lbf in /8" 20 lbf ft lbf ft 2 lbf ft /8" lbf ft lbf ft /8" lbf ft 60 lbf ft Typical imensions Hose stem to with reducing connector W F V O.. F V W thread details /6" /8" x 24 TPI 0,44 0, 0,26 7 /6" x 24 TPI 0,0 0,8 0,26 /2" x 24 TPI 0,6 0,42 0,26 /8" 9 /6" x 24 TPI 0,60 0,42 0,28 /2" x 24 TPI 0,66 0,0 0,26 /8" 7 /8" x 20 TPI 0,72 0,8 0,4,02 x 8 TPI 0,78 0,64 0,40 F W F V = outside diameter size and thread details.* = or stem length inside fitting. = nippled connector length inside fitting. W = projection of tubing nut from compression joint. ll these dimensions are common to a particular tubing outside diameter size. Refer to later pages in this section for details of individual coupling dimensions. imensions V & W will vary with the torque applied so these dimensions are guidance only. *Note: The O/ sizes in the following tables refer to the nots compression threads listed above. 0/97 N/L
6 Form Cutter Tap F Product F K number O/ /6" 2 0,47 0, , 0, /6" 2 0,9 0, /8" 2 0,6 0, /2" 2 0,69 0, /8" 2 0,7 0, ,8 0,787 Plug taps only available Product For number O/ thread /6" /8" x 24 TPI /6" x 24 TPI /2" x 24 TPI /8" 9 /6" x 24 TPI /2" x 24 TPI /8" 7 /8" x 24 TPI x 8 TPI Tubing Plug Male O/ thread Stem Tailpiece daptor O/ stem to hose Product F number O/ /6" 0,72 0, ,7 0, /6" 0,72 0, /8" 0,80 0, /2" 0,97 0, /8",06 0, ,,0 L C Product C L S number O/ hose stem bore /6",69 0,69 0, ,8 0,69 0, /6" /6" 2,00 0,7 0, /8" /8" 2, 0,7 0, /2" /2" 2,28 0,78 0, ,6 0,88 0,6 Female Tailpiece daptor Tube to hose Straight Stem daptor O/ stem to male taper SP thread L T C Product C L S number O/ hose /F bore /2" /2",94 0,92,06 0, ,7 0,60,00 0,9 Product S T number O/ thread /F stem SP /8",0 0,4 0,8 0, 0, ,69 0,60 0,44 0,22 0, /2" /8" 2,09 0,7 0,0 0,8,2 N/L /97
7 Nippled Stem Connector Male O/ to O/ stem Reducing Connector Female O/ to male O/ T Product S number O/ O/ /F /6" 0,9 0,4 0, /6" /6" 0,72 0, 0, /8" /6" 0,80 0,60 0, /2" /6" 0,97 0,82 0,6,00 0, 0, /8" 0,80 0,60 0, /2" 0,97 0,82 0, /8",09 0,60 0, /2" /6" 0,97 0,82 0, /8",06 0,92 0,2 Product S T number O/ O/ /F ,,0 0,2 /2" /8" 0,97 0,82 0, stem 4 02 /8" /8",06 0,92 0, /6",9 0,4 0, 0, /8",,0 0, ,64 0,4 0, 0, /8" /2",,0 0, /6",66 0,60 0,22 0, /2",,0 0, /8" /8",8 0,60 0,2, /2" /2" 2,22 0,82 0,8, /8" /8" 2,4 0,92 0,47, ,6,0 0,9,0 ulkhead Connector Female O/ ulkhead Locknut P P N Product N P S ulkhead Locknut number O/ /F max. thread clearance number bulkhead SPP drilling , 0,7 0,88 0,6 0,6 0, , 0,82 0,88 0,6 /8" 0,9 0, ,2 0,82,00 0,7 /8" 0,2 0, /8", 0,92,06 0,8 /2" 0, 0, /2",7,0,0,22 0,44, /8",7,0,0,9 7 /8" 0,6, ,7,48,8,9 " 0,69, Product P number thread /F M2 x, M x, M8 x, M20 x, M24 x, M0 x, 8 4 Minimum ulkhead thickness,0. Locknuts should be ordered separately, see next page. 0/97 N/L
8 ulkhead daptor Female parallel SP thread to female O/ Nippled Connector Male O/ Product S number O/ /F ,8 0,4 0, P ,47 0,4 0,,44 0,60 0,22 N /8",6 0,60 0,2 /2" 2,06 0,82 0,8 Product N P S number O/ thread /F max SP bulkhead thread /8" " 0,7 0,7 0,0 0, 0,6 Locknut should be ordered separately. Minimum ulkhead thickness 0,. Unequal Connector Female O/ to male O/ Straight Connector Female O/ Product S number O/ O/ /F /6",28 0,60 0, ,28 0,60 0,6 Product S number O/ /F ,00 0, 0, , 0, 0, /6" /8",4 0,7 0,9 /2",47 0,92 0, ,2 0,60 0,2 /8", 0,7 0, /2",6 0,92 0, /8",6,0 0, ,7,20 0,6 racketed Straight Connector Female O/ Metric to daptor O/ male to metric O/ female ØQ Product S number O/ O/ /F ØK R /8" 8, 0, /2" 7, 0 2, /6" 22,0 0 2, /6" 24,0 2, /6" 27,0 2,8 20,0 2, ,,2 Product K Q R S number O/ , 7,2 /6" 2,0 7 6, /8" 28,0 9 6, ,06 0,8 0,0 0,27 x 0,6 0, 0, /2" 2,0 22 9, ,2 0,87 0,6 0,27 x 0,6 0,4 0, /8" 4, 0, , 0,97 0,69 0,27 x 0,7 0,8 0, ,0 0, /8",8 0,97 0,69 0,27 x 0,7 0,8 0, , 6 6, /2",6,4,4 0,27 x,00 0,44 0, /8" 4,0 6 9, ,0 4,0 46 2,0 N/L /97
9 Nippled daptor Male O/ to male taper SP thread Nippled daptor Male O/ to female parallel SP thread Product S number O/ thread /F SP /8",09 0,4 0,8 0, /8", 0,4 0,8 0, ,22 0,60 0,44 0, /8", 0,60 0,44 0, /2",4 0,82 0,44 0, /6" /8",0 0,7 0,0 0, /8" /8",6 0,7 0,0 0, /2" /8",6 0,82 0,0 0, /2" /2",7 0,92 0,6 0,8 Product S number O/ thread /F SP /8", 0, 0,0 0, /8", 0, 0,0 0, 4 0 7,22 0,7 0,4 0, /8" /8", 0,82 0,4 0, /2" /8",0 0,82 0,4 0, /2" /2",0,6 0,9 0,8 Straight Male daptor Female O/ to male taper SP thread Straight Male daptor (NPTF) Female O/ to male NPTF thread Product S number O/ thread /F Product S number O/ thread /F SP SP /8" 0,78 0, 0,8 0, /8" 0,78 0,0 0,8 0, /8" 0,97 0, 0,8 0, ,00 0,6 0,6 0, /8",09 0,60 0,8 0, /8" 0,97 0,6 0,8 0, /8" /8", 0,7 0,8 0, ,00 0,6 0,6 0, ,84 0,60 0,44 0, /8",09 0,6 0,8 0, ,88 0,60 0,44 0,9 0,88 0,60 0,44 0, ,00 0,6 0,6 0,2 /6" /8",00 0,69 0,6 0, /8",9 0,7 0,44 0, /2",00 0,88 0,7 0, /2", 0,92 0,44 0, /8", 0,69 0,6 0, /6" /8" 0,94 0,7 0,0 0, /8" /8",06 0,69 0,6 0, /8" /8",00 0,7 0,0 0, /8" /2", 0,88 0,7 0, /2" /8", 0,92 0,0 0, /2",44 0,88 0,6 0, /8" /8",8,0 0,0 0, /2" /8",44 0,88 0,6 0, /2" 0,88 0,92 0,6 0, /2" /2",8 0,88 0,7 0, /8" /2",00 0,92 0,6 0, /8" /2",6,00 0,7 0, /2" /2",2 0,92 0,6 0, /8" /2",0,0 0,6 0, /2",69,20 0,6 0, /2",8,0 0,7 0, /8",44,0 0,7 0, ,0,20 0,7 0, ",,9 0,88 0,69 0/97 N/L
10 Straight Male daptor Female O/ to male parallel SP thread Straight daptor Female O/ to female parallel SP thread ØM Product S number O/ thread /F SP /8" 0,78 0,60 0,29 0, /8" 0,84 0,60 0,29 0, /8" 0,97 0,60 0,29 0, ,00 0,7 0,44 0, , 0,7 0,44 0, /8",9 0,7 0,44 0, /8" /8",9 0,92 0,44 0, /2" /8",2 0,92 0,44 0, /2",00,0 0,6 0, /8" /2",9,0 0,6 0, /2" /2",8,0 0,6 0,44 Product S number O/ thread /F SP /8" 0,8 0, 0,2 0, /8",00 0,60 0,8 0, /8",0 0,60 0,8 0, ,94 0,60 0,8 0, ,00 0,60 0,8 0, ,0 0,7 0,8 0, /8",06 0,7 0,8 0, /6" /8",6 0,82 0,0 0, /8" /8",9 0,82 0,0 0, /2" /8",9 0,92 0,44 0, /8" /8",2,0 0,44 0, /2",,0 0,44 0, /2" /2",9,0 0,44 0, /8" /2",2,0 0,44 0, /8",44,20 0,6 0, ,8,20 0,44 0, ",88,67 0,88 0,69 Universal Stem lbow O/ stem Stem lbow Connector Female O/ to O/ stem Product K S number O/ stem Product K S number O/ O/ stem ,9 0,8 0, /6" /6" 0,69,9 0,48 0, K ,2 0,44 0,22 /8", 0,44 0, ,7,9 0,6 0,7 /6" /6" 0,8,2 0,6 0, /2",6 0,6 0, /8" /8" 0,9,8 0,69 0, /2" /2",0,78 0,9 0, /8" /8",,97,0 0, ,22 2,9,9 0,9 N/L /97
11 lbow Connector Female O/ racketed lbow Connector Female O/ R Ø S Ø S Ø Q R Product S number O/ /F /6" 0,6 0,0 0, ,69 0,6 0, /6" 0,8 0,6 0, /8" 0,88 0,69 0, /2",00 0,94 0, /8",, 0, ,2,2 0,69 Product K Q R S number O/ stem /6" 0,94 0, 0,27 x 0,66 0,27 0, ,0 0,66 0, x 0,7 0, 0, ,0 0,66 0, x 0,7 0, 0, /8", 0,86 0,44 x,00 0,44 0, /2", 0,86 0,44 x,00 0,44 0,44 Female lbow daptor Female O/ to female parallel SP thread Product K S number O/ thread /F stem SPP /8" 0,8 0,69 0,69 0,0 0, /8" 0,8 0,8 0,8 0,6 0, /8" 0,8 0,88 0,88 0,6 0, ,44 0,8 0,8 0,69 0, ,44 0,88 0,88 0,69 0, ,44 0,88 0,88 0,69 0, /8" 0,44 0,88 0,88 0,69 0, /2" 0,8,00,00 0,94 0, /6" /8" 0,48 0,88 0,7 0,8 0, /8" /8" 0,44 0,94 0,88 0,8 0, /2" /8" 0,44,00,00 0,94 0, /2" /2" 0,0,00,00 0,97 0, /8" /2" 0,6,,2, 0, /8" 0,6,0,2,2 0, ,6,2,0,2 0, " 0,88,0,0,,9 0/97 N/L
12 Male lbow daptor Female O/ to male taper SP thread Male lbow daptor Female O/ to male NPTF thread K K Product K S number O/ thread SP /8" 0,8 0,69 0,69 0,0 0, /8" 0,8 0,69 0,69 0,6 0, /8" 0,8 0,8 0,8 0,6 0, ,44 0,69 0,7 0,6 0, ,44 0,69 0,7 0,6 0, ,44 0,8 0,88 0,6 0, /8" 0,44 0,88 0,88 0,69 0, /2" 0,44,00 0,94 0,94 0, /6" /8" 0,0 0,8 0,94 0,69 0, /8" /8" 0,0 0,88 0,94 0,69 0, /2" /8" 0,0,00, 0,97 0, /8" /8" 0,0,,,0 0, /2" /2" 0,6,00, 0,97 0, /8" /2" 0,6,,2,0 0, /8" 0,7,,8,0 0, ,7,28,47,2 0, " 0,88,0,69,0 0,94 Product K S number O/ NPTF thread /8" 0,8 0,69 0,69 0,0 0, /8" 0,8 0,69 0,69 0,6 0, ,6 0,69 0,94 0,6 0, /8" 0,6 0,88 0,94 0,69 0, /2" /2" 0,7,00, 0,94 0, /8" /2" 0,7,,, 0,0 Universal Stem Tee O/ stem Stem Tee Connector Female O/ to O/ stem K Product K S number O/ stem , 0,2 0, ,9 0,8 0, ,2 0,8 0, /8", 0,48 0, /2",6 0,6 0,8 Product K S number O/ O/ stem /6" /6" 0,6,9 0,48 0, ,72,9 0,6 0, /6" /6" 0,8, 0,6 0, /8" /8" 0,88,42 0,69 0, /2" /2" 0,97,78 0,90 0,8 N/L /97
13 90 Stem Tee Connector Female O/ to O/ stem Side Stem Tee Connector Female O/ to O/ stem 90 Product K S number O/ O/ stem /6" /6" 0,69,9 0,48 0, ,7,9 0,6 0, /6" /6" 0,8,2 0,6 0, /8" /8" 0,9,8 0,69 0, /2" /2",0,78 0,92 0,8 Product K S number O/ O/ stem /6" /6" 0,69,9 0,48 0, ,7,9 0,6 0, /6" /6" 0,8,2 0,6 0, /8" /8" 0,9,8 0,69 0, /2" /2",0,78 0,9 0, /8" /8",,97,0 0,47 Tee Connector Female O/ racketed Tee Connector Female O/ Ø Q R Product K S number O/ O/ stem /6" /6" 0,6 0,6 0,0 0, ,69 0,69 0,6 0, /6" /6" 0,8 0,8 0,6 0, /8" /8" 0,84 0,84 0,69 0, /2" /2",00,00 0,94 0, /8" /8",07,, 0, ,2,2,22 0, /2",00,00 0,94 0,2 Product K Q R S number O/ ,28 0,69 0,6 0,27 x 0,6 0,4 0, ,28 0,69 0,6 0,27 x 0,6 0,4 0, ,44 0,8 0,69 0,27 x 0,7 0,8 0, /8",47 0,84 0,69 0,27 x 0,7 0,8 0, /2",66 0,97 0,44 0,27 x,00 0,44 0,44 0/97 N/L
14 Female Tee daptor Female O/ to female parallel SP thread Side Tee daptor Female O/ to female parallel SP thread Product K S number O/ thread SP /8" 0,8 0,69 0,6 0, /8" 0,44 0,69 0,6 0, ,8 0,84 0,6 0, /8" 0,8 0,84 0,69 0, /2" /8" 0,44,00 0,94 0,44 Product K S number O/ thread SP /8" 0,2 0,6 0,6 0, /8" 0,2 0,69 0,6 0, ,6 0,88 0,69 0, /8" 0,6 0,88 0,69 0, /2" /8" 0,42,00 0,94 0,44 Male Tee daptor Female O/ to male taper SP thread Male Side Tee daptor Female O/ to male taper SP thread 2 Product K S number O/ thread SP /8" 0,8 0,69 0,69 0,0 0, /8" 0,8 0,69 0,7 0,6 0, ,44 0,84 0,8 0,6 0, /8" 0,44 0,84 0,8 0,69 0, /2" /8" 0,0 0,97,06 0,94 0, /2" /2" 0,6 0,97,9 0,94 0,44 Product 2 K S number O/ thread SP /8" 0,8 0,69 0,72 0,66 0,6 0, /8" 0,8 0,69 0,7 0,69 0,6 0, ,44 0,84 0,84 0,84 0,69 0, /8" 0,44 0,84 0,84 0,88 0,69 0, /2" /8" 0,0 0,97,0,00 0,94 0,4 N/L /97
15 Compression Fittings Y Connector Female O/ racketed Y Connector Female O/ 4 4 Ø Q 6 6 R ØK Product K S number O/ /6" 0,69 0,69 0,0 0, ,69 0,7 0,6 0, /6" 0,8 0,8 0,69 0, /8" 0,8 0,8 0,69 0, /2",00,00 0,94 0,44 Product K Q R S number O/ 4 0 0,7 0,9 0,66 0,27 x 0,7,84 0, /2" 2,49 0,69,00 0, x, 2,6 0,44 Four Way Connector Female O/ Four Way Stem Connector Female O/ to O/ stem 2 Product K S number O/ ,69 0,6 0, /6" 0,84 0,69 0, /8" 0,84 0,69 0, /2" 0,97 0,94 0, /8",09,0 0,44 Product 2 K S number O/ 0/ stem /6" /6" 0,8,2 0,8 0,6 0, /2" /2" 0,97,78,0 0,9 0,8 0/97 N/L
16 Connector lock Single Sided Manifold U U U U U U Ø Q 2 R2 2 R R R R Ø Q Product No. 2 Q R R U number of O/ outlets , 0,6,00 0,0 0, 0,20 0,66 0, ,6 0,7,2 0,6 0,8 0,27 0,8 0, /6" 2,68 0,6,00 0,0 0, 0,20 0,66,8 0, /6",8 0,7,2 0,6 0,8 0,27 0,8,7 0, /6" 4,06 0,6,00 0,0 0, 0,20 0,66 2,7 0, /6", 0,7,2 0,6 0,8 0,27 0,8,0 0,88 Product Inlet Outlet No. 2 Q R R R2 U number of O/ O/ outlets /6" /6" 4,69 0,7,00 0,6 0,20,9 0,2 0,20 0, /2" 4,8,00,8 0,8 0,27 2,94 0,44 0,2 0, /2" /6" 4,06,00,8 0,88 0,27 4,8 0,4 0,2, /8" /8" 4 4,6,,0 0,94 0, 4,00 0, 0, 0, /2" 4 6,,2,7,06 0,,8 0,8 0,, /6" /6" 6,06 0,7,00 0,62 0,20 4,6 0,2 0,20 0, /2" 6,9,00,8 0,8 0,27 4,6 0,44 0,2 0, * /6" /6" * 0,7,00 0,6 0,20 0,2 0,20 0, * /2" *,00,8 0,8 0,27 0,44 0,2 0, * /2" /6" *,00,8 0,88 0,27 0,4 0,2, * /8" /8" *,,0 0,94 0, 0, 0, 0, * /2" *,2,7,06 0, 0,8 0,,2 Manifolds up to 2 outlets can be provided subject to minimum economic production quantity. *Note: Quote these product numbers and specify outlets required when ordering special outlet manifolds in imperial sizes, e.g for /2" O/ to /6" O/ manifold having 8 outlets. (Subject to minimum economic production quantity). ouble Sided Manifold R2 2 U U Ø Q R R Product Inlet Outlet No. 2 Q R R R2 U number of O/ O/ outlets /6" /6" 4,69 0,7,00 0,6 0,20,8 0,2 0,20 0, /2" 4,8,00,8 0,8 0,27 2,94 0,48 0,2 0, /2" /6" 4,06,00,8 0,88 0,27 4,8 0,4 0,2, /8" /8" 4 4,6,,0 0,94 0, 4,00 0, 0, 0, /2" 4 6,,2,7,06 0,,8 0,8 0,,2 Manifolds up to 2 outlets can be provided subject to minimum economic production quantity. N/L /97
17 Hobbs Couplings The design of a Hobbs coupling allows the fittings to be screwed into a parallel SP tapping and accurately located for position in both height and direction before it is secured with the special coned locknut and polyurethane seal. Wring locknut down metal to metal to create an effective seal. Hobbs lbow daptor Female O/ to male parallel SP thread K Product K S number O/ thread SP /8" 9 /6" /6" 7 /8" 9 /6" /6" /8" 9 /6" /6" 7 /8" 9 /6" /6" /8" 9 /6" /6" /6" /8" /6" 4 08 /6" " /6" " /6" /6" /8" /8" /6" 7 /8" /6" /2" /6" /6" /6" /8" 2 /2" /6" /6" /8" /8" /8" 2 /2" 7 /8" /6" /6" /8" /2" /8" 2 /2" " /6" /6" /8" /2" /2" 2 /2" " 7 /6" /2" /8" /2" 2 /2" /8" /2" /8" /2" /8" " 2 /2" /6" 4 08 " 9 /2" 2 /2" /6" " 7 /6" 2" 7 /6" /6" Hobbs Coned Locknut Female parallel SP thread Hobbs Seal Product number thread /F SP /8" 0,22 0, ,2 0, /8" 0,28 0, /2" 0,, ,, " 0,4,67 Product number thread /F SP /8" 0,08 0, ,09 0, /8" 0,09 0, /2" 0,0 0, ,0, " 0,, 0/97 N/L
18 Sealing Washers for use with banjo fitting Universal Tubing Sleeve Suitable for nylon metallic tubing Nylon Product Size Material number M Nylon /8" Copper Copper /8" Copper /2" Copper Ø Product K number O/ /6" 0, ,24 /8" /6" 0, /8" 0,27 /2" /2" 0, /8" 0, ,7 /6" 7 /6" 4 /64" /64" /6" Copper Tubing Sleeve Suitable for metallic tubing only Tubing Nut Ø Product K number O/ /6" 0,2 0, ,28 0, /6" 0,29 0, /8" 0,28 0, /2" 0,7 0,62 H Product H number thread O/ /F /8" x 24 TPI /6" 0,40 0,4 0, /6" x 24 TPI 0,4 0,4 0, /2" x 24 TPI /6" 0,4 0, 0, /6" x 24 TPI /8" 0,48 0,60 0, x 24 TPI /2" 0,7 0,82 0, /8" x 20 TPI /8" 0,66 0,92 0, ,02" x 8 TPI 0,70,0 0,44 Folded Copper Washer onded Washer Ø Product Suitable for K number SP or metric or imperial thread thread thread ,8 /8" /8" x 24TPI,, ,2, 7, ,7 /8" M6, ,0 /2", 26, ,0 /8",8 28, ,,8 2, ,2 7 /8" M0,8 6, , " M,8 8, ,0 2,2 49, , 7 /6" x 24TPI, 4, ,7 /2" x 24TPI, 7, , M4 9 /6" x 24TPI, 8, , x 24TPI, 24, , M8, , M0, , M2, 7 Product K number for SP thread /8" 2, 6, , 20, /8" 2, 2, /2" 2, 28, /8" 2,, , 4,9 N/L /97
19 Warning These products are intended for use in industrial compressed air systems only. o not use these products where pressures and temperatures can exceed those listed under Technical ata. efore using these products with fluids other than those specified, for nonindustrial applications, lifesupport systems, or other applications not within published specifications, consult Norgren. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products where applicable. 0/97 N/L
Compression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
More information10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
More informationBSP & HOSE Fittings M5, 1/8... 1
SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors
More information10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
More informationPNEUFIT 10 series Push-in fittings
PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for
More information15 and 16 Series BSP and hose fittings
SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical
More informationNickel Plated BSP & Hose Fittings
Nicke Pated SP & Hose ittings M3, M5, 1 8" 1 1 2" SP Suitabe for use in most genera industria appications right nicke pated brass ompact design Reiabe and corrosion resistant Washers incuded where necessary
More informationpneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
More informationPneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/ tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
More informationLF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
More information1COMPRESSION FITTINGS
SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and
More information60 series, 2/2 or 3/2 Ball valve
>> Port size: Rp/..., /... >> Ideally suited for most general purpose applications >> Easy installation, simple operation and maintenance free >> -way ball valves with actuator interface conforming to
More informationPNEUMATICS FITTINGS See easy to make a connection on page Technical Specification shown on pages
PNEUMATICS FITTINGS Super Speedfit Push-in fittings have been specially designed for miniature pneumatics applications. They provide a fast and secure way of connecting tubes and offer considerable advantages
More informationPL Nickel-Plated Brass Spigot Fitting Range
P Nickel-Plated Brass Spigot itting Range P nickel-plated Brass Spigot ittings Stud ittings BP 3BP 4BP BSPP 8BP Metric BP 3BP 4BP BSPP 8BP Metric RBP R3BP SBP S3BP Banjo itting Tube-to-Tube ittings omplementary
More informationbrass compression fittings
compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube
More informationpneumatic function valves
pneumatic function valves Fluidline omponents, Inc lawson, MI 48017 www.legris.com flow control regulators meter out version meter in version bi-directional version fine adjustment screw locknut fine adjustment
More information6215L Inline & NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
L Inline & NMUR series, / & / > Port size: / (ISO /NPT) or flanged with NMUR interface > Suited for outdoor use under critical environment conditions (see solenoid list) > Variable valve solenoid combination
More informationADAPTERS AND TUBE FITTINGS
DPTERS INDEX Section Pages Hose 15-67 Fittings 68-180 dapters and Tube Fittings 181-228 DPTERS ND TUE FITTINGS Description Page dapters raze and weld to 37 flare 221 raze and weld to split flange 220 SPP
More informationComposite Push-In Fittings - NPTF/INCH
composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number
More informationLB74G - EXCELON Modular System General purpose filter/regulator
LBG - EXCELON Modular System > Port size: /... / (ISO G/PFT) > Push to lock adjusting knob with optional tamper resistant accessory > Excelon design allows in-line installation or modular installation
More information21D Allfluid pressure switch, electromechanically actuated
D > > 0,... 0, bar (0,... psi), G/, / NPT > > High accuracy > > High number of switching cycles > > Microswitch approved by UL and CSA > > Fixed or adjustable hysteresis > > Shock and vibration tested
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Measure the thread diameter with an / caliper. When
More informationV88 series Redundant valve manifold systems - Semi modular 2oo2 Availability
oo Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil housing > > International approvals > > Stainless
More informationFlareless Bite Type Fittings
Ferulok Flareless Bite Type Fittings Ferulok Flareless Bite Type Fittings 4300 atalog BU TU WLN HBU Nut Ferrules Bulkhead Locknut Union Nuts, Ferrules, Locknuts Straights 7 7 7 7 WBU F5BU FBU GBU TRBU
More informationG 1/2 30,5 A Brass NBR 0,8 3,
4/2 way poppet valves electromagnetic actuated, directly controlled /4 & /2 Working from 0 bar up Suitable for vacuum range down.33 0-2 mbar l/s Protection class : IP 65, Ex em, Ex d TEX approved (see
More informationM/60100/M, Slide units Magnet piston, double acting
M/000/M, Slide units > > Ø 0... 0 mm > > High quality sliding bearings ensure long durable life and high guidance performance > > Easy to install-reduces costly design time > > Double piston rod provides
More informationInsert Fittings. KF Series
Insert Fittings Series A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials ube grip (resin sleeve) ube is
More informationCode Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)
411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption
More informationV88 series Redundant valve manifold systems - Semi modular 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
oo Safety, oo Availability and oo Safety and Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil
More informationISO*STAR (SXE, SXP) 5/2 & 5/3 Solenoid and pilot actuated glandless spool valves
*STR (SX, SXP) / & / > > Sub-base mounted, 99- s, or > > Specially coated glandless spool and sleeve for long trouble-free life > > Integral flow regulators available on and s for cylinder speed control
More informationQuick-Lock Tubing. Total Solutions for Air, Vacuum & Inert Gas Systems
Quick-Lock Tubing Total Solutions for Air, Vacuum & Inert Gas Systems 2 High Quality Aluminum Piping Systems Compressed Air Piping - Blue 14 mm -.5" Tubing (10 Pack - 8 ft Length) 80 ft C9000-14-BLUE-PK10
More informationCompression Fittings
RSS COPRESSION Compression Fittings RSS FITTINS Thread - Tube O.D. 1/8 /16 1/4 5/16 /8 7/16 1/2 5/8 /4 7/8 Thread - 5/16-24 /8-24 7/16-24 1/2-24 9/16-24 5/8-24 11/16-20 1/16-18 1-18 1-1/8-18 Working Pressure
More informationUNITED STATES MEXICO CANADA
www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.
More informationV03, V04 and V05 Series
V03, V04 and V05 Series / and 3/ Poppet Valves Electrically Actuated G 1 8, G 1 4, CNOMO and Interface Extensive range of power and orifice size options Removable coil Manifold rail for 1 to 0 valves Operating
More informationSpare parts list. Handheld pneumatic pick hammers CP 0222 CHIT, CP 0222 CHIT BS, CP 0222 CHOT BS.
Spare parts list Handheld pneumatic pick hammers CP 0 CHIT, CP 0 CHIT, CP 0 CHOT www.cp.com CP 0 CHIT, CP 0 CHIT, CP 0 CHOT 9800 00 0 CP 0 CHIT, CP 0 CHIT, CP 0 CHOT Contents Contents General information...............................................................
More informationPoly-Tite Fittings. Order By part number and name.
oly-tite ittings Advantages A compact brass compression fitting designed to speed any installation. Body, nut and sleeve are furnished pre-assembled, ready for installation. An exclusive acetal copolymer
More informationRM/92000/M, Short stroke cylinder Magnetic piston, double acting
> Ø... 00 mm > One third the basic length of a corresponding ISO/VDM model > Fully non-corrodible specification > Standard magnetic piston for full control system versatility > Low friction, long life
More informationCompressed Air Systems Pneumatic Fittings LLDPE Tube
John Guest Limited Horton Road, West Drayton, Middlesex UB7 8JL, England Tel: 01895 449233 Fax: 01895 420321. www.johnguest.com and are registered trademarks of John Guest International Limited Copyright
More informationQuality, Precision and Unbeatable Value!
PUSH IN FITTINGS 31 RX Push In Fittings 1 High quality Push In Fittings in composite materials or all nickel plated brass. 100% leak tested during production, these fittings are suitable for both pneumatic
More information80265 series, 3/2 Indirect solenoid actuated poppet valve
> > Port size: G/... G > > High flow rate > > Optionally air pilot operated > > High repeatability of switching time > > Variable valve solenoid combination Technical features Medium: Compressed air, filtered,
More informationpush-to-connect fittings system LF3000
legris products are available from: MARYAD MTRIS push-to-connect fittgs system 3000 Order from: Maryland Metrics email: techfo@mdmetric.com ph. (800)638-1830 fx. (800)87-939 prciple of system 3000 legris
More informationJOHN GUEST SPEEDFIT FITTINGS
G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE
More informationSPCH/ Big bottle blowing block
> > Blowing block for linear and rotating blow moulding machines > > Digital position indicator - counter with four decade from 000.0 to 00.0 > > Best suited for PET bottles from 5 up to 30 litres (up
More informationM M. P ipe BRASS BRASS FITTINGS F G. Actual outside diameters of pipe threads. Actual Male Thread Profiles
RSS FITTINS Pipe RSS Lead Free Fittings see pages 166-175 For ronze & Larger Sizes see pages 208-215 For SPT/ SPP see pages 116-117 P ipe Size 1/16 1/ 8 1/ 4 3/ 8 1/ 2 3/ 4 1 T hread Size e 1/16-27 1/8-27
More informationFlow. Flow. N/en
/ poppet valves electromagnetic actuated, directly controlled G /4 or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to, 0 - mbar For a.c. solenoid systems with integrated
More informationCOMPRESSED AIR SYSTEM ½" TO 2½" Quick-Lock Tubing
COMPRESSED AIR SYSTEM ½" TO 2½" Quick-Lock Tubing Why Gardner Denver? Simply stated There is no equal Quick-Lock from Gardner Denver has taken piping systems to a new level. Without compromising any structural
More informationOperating pressure (bar) kv factor (m 3 /h) *3)
/ way poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar
More informationSpecialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE. What You Measure, We Manage
Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE What You Measure, We Manage ABOUT US ABOUT US DRM Technic is a global manufacturer and supplier of gas analysis solutions and
More informationR./57100/M, R./57300/M, Roundline cylinder Magnetic piston, single acting
R./700/M, R./700/M, Roundline cylinder > >... 0 mm > > Saves 0% space over the basic length of a corresponding ISO/ VDM cylinder > > Standard magnetic piston for full control system versatility > > Low
More informationJOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS Compressed Air Technical Information 518 Compressed Air Fittings 519 Brass Compressed Air Fittings 520 Compressed Air Pipe & Accessories 521 Accessories
More informationRM/28000/M, ISO cylinder Magnetic piston, single acting
> > Ø 0... 5 mm > > Standard magnetic piston for full control system versatility > > Nose mounting nut and piston rod locknut as standard > > Conforming to ISO > > Optional port arrangement for compact
More informationSCVA08, SCVA10, SCVA20 & SCVA32, 3/2 Solenoid actuated safety valve
SCV0, SCV0, SCV & SCV, / > > Port size: /4, /, /4 and (ISO G, NPT) > > Range of sizes - DN, 0, and > > Redundant valve assembly, pneumatic self monitoring with integrated safety silencer > > Ensures safe
More informationISOLATION RELAY RACK ISOLATION KIT 19 RACK MOUNT RELAY RACK ISOLATION KIT, SLOTTED UNEQUAL FLANGE RACK ISOLATION KIT 23 RACK MOUNT
ISOLATION Info: 9070 = Isolation RELAY RACK ISOLATION KIT 19 RACK MOUNT 9070-1019 19" Rack Mount 23 RACK MOUNT 9070-1023 23" Rack Mount RELAY RACK ISOLATION (KIT) RELAY RACK ISOLATION KIT, SLOTTED 19 RACK
More informationPlumbing Brass Specification Guide
Plumbing Brass Specification Guide www.wattscanada.ca The Dial-ese Cartridge, a Standard in Canadian Plumbing for 0 Years Since its conception in the early 0s, the Dial-ese cartridge has proven to be one
More information26360, Inline. Technical data. Ordering information See page 2. For connector plugs see page 2 and data sheets N/en /2 5/2.
66, 87 Inline / and 5/ directional control valves NG 6 and Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G /4 and G / For single and double operated actuators Manual
More informationFLEXBOX. Installation Guide
FLEXBOX Installation Guide FLEXBOX 1 Important Safety Instructions WEIGHT LIMIT MAXIMUM WEIGHT 50 LBS. THE STRUCTURE TO WHICH THE BOX IS MOUNTED (CEIL- ING, WALL, TABLE, POLE) MUST BE ABLE TO SUPPORT FIVE
More informationPEX Press EN_US_2014_V2.indb 79 2/7/ :15:37 AM
79 For both residential and commercial applications, Viega PEX Press is the trusted way to join PEX tubing. As the world leader in press technology, Viega was the first to offer a press system to the PEX
More informationB64G - Olympian Plus plug-in system Filter/regulator
BG - Olympian Plus plug-in system > > Port size: /... / (ISO G/PTF) > > High efficiency water removal > > Diaphragm and balanced valve design ensure good regulation characteristics > > on-rising adjusting
More informationCompression Fittings
ompression Fittings TITN ompression Fittings are designed to comply with established industry standards. This economical fitting is available in a wide range of off-the-shelf sizes and styles. They are
More informationAiretool Condenser Expanders Selection Guide G-900 Series Heat Exchanger and Condenser Tube Expanders. Airetool Heat Exchanger Condenser Expanders
Airetool Heat Exchanger Condenser Expanders Step Rolling Step rolling is required when expanding tubes in thick tube sheets. Typically the first expansion is made at the innermost location, away from the
More informationStainless One-touch Fittings. Applicable Tubing. Tube material Tube O.D. Specifications. Thread Nut Sealant (Thread portion) Component Materials
Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release
More informationRev/02/ Flared T (SAE J514) ube Fittings
Rev/02/2013 37 lared Tube ittings (SA J514) Introduction PANAM has been in the field of manufacturing precision Tube ittings and Instrumentation valves since the last Two decades. With a team of dedicated
More informationJOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING. Compressed Air Technical Information 562. Compressed Air Fittings 563. Brass Compressed Air Fittings 564
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING Compressed Air Technical Information 562 Compressed Air Fittings 563 Brass Compressed Air Fittings 564 Compressed Air Pipe & Accessories 565 ELEVEN Accessories
More information26360, 80207, 3/2, 5/2 & 5/3 Indirect solenoid actuated spool valves
66, 87, /, 5/ & 5/ > > Port size: G/ & G/ > > Compact design > > Easily interchangeable solenoid > > tandard manual override > > ll valves available with Ex protected coils (TEX or other international
More informationCatalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
More informationLF 3600 Nickel-Plated Brass Instant Fittings
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding 00 Nickel-Plated Brass Instant ittings One fitting for all industrial
More informationOperating pressure (bar)
/ poppet valves electromagnetic actuated, directly controlled G /4, /4 NPT, G /, / NPT or flanged with NAMUR Interface Main application: single operated actuators for plants Valves for safety systems up
More information95100, 2/2 (stainless steel) Direct solenoid actuated poppet valves
9500, / (stainless steel) > > Port size: G/8, G/4, /4 NPT > > Working from 0 bar up > > Assembled free of oil and grease > > Suited for fine vacuum down to,33 0 - mbar > > For a.c. solenoid systems with
More informationConnectivity Products
Cable Glands Strain Relief Snap-In Labels Lock Nuts Torque Wrench Protective Sleeves U2 U5 U5 U6 U7 U8 Features NPT and PG thread cable glands in nylon or metal materials Locknuts in multiple thread sizes
More informationFlow. (l/min) (ms) N/en
66, 87 Inline / & / spool valves electromagnetic actuated, indirectly controlled G / & G / For single and double operated actuators Manual override with and without detent imple design of soft seal spool
More informationTURCK Industrial Connectivity Products
TURCK Industrial Connectivity Products General Accessories Liquid Tight Strain Relief Cable Glands Lock Nuts Page R2 - R4 Page R6 Snap-in Labels Strain Relief Cord Grips Page R5 Page R5 Protective Sleeving
More informationPureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
More information26230, Inline 3/2, 5/2 and 5/3 way soft seal spool valves electromagnetic actuated, indirectly controlled G 1/4, G 1/2
/, / and / way soft seal spool valves electromagnetic actuated, indirectly controlled /, / traight-through flow, high v-factor tandard manual override ompact design asily interchangeable solenoid system
More informationOperating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and gold plated contacts available High
Operating voltages up to 40 kvdc Operating current up to 30 Amps Advanced contact technology Silver plated and contacts available High performance insulation material General characteristics and technical
More informationMating Interfaces 1,63 (.064) 3,45 (.135) Ø3,71 (.146) MAX Ø6,61 (.260) MAX Ø3,71 (.146) MAX
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
More informationSMK Connectors. General Description. Contents (Click on any line to go to the indicated page) Test Data
SMK Connectors General Description These high-performance SMK (2.92 mm) connectors feature maximum VSWR for cable connectors of 1.15:1 from DC to 18 GHz, and 1.3:1 from 18 to 40 GHz. The maximum VSWR for
More information26360, NAMUR. Technical data
66, 87 NAMUR /-, /- and / directional control valves Operation: elektromagnetic Indirectly controlled soft seal spool valves Port size: G/ NAMUR-Interface For single and double operated actuators Manual
More informationRMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment
RMI-RMP L100.05 us B RMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment STÄUBLI CORPORTION P.O. BOX 189 - DUNCN - S.C. 29334 PHONE 864/433-1980 TOLL-FREE NUMBER
More informationCannon 50 Ohm Connectors
SMB / SMC Cannon's SMB Snap-on and SMC Screw-on subminiature coaxial connectors have been specifically engineered for high performance and high reliability applications in both military and commercial
More informationStandard Series Standard
Standard Series Standard Technical Data Coupler connector, cable connector and coupler connector rectangular housing Locking screw connection Protection IP 50 to IP 54 with conexil in the housing, flat-gasket
More informationLCD 500,1500. Spare parts list. Handheld core drills. Valid from serial number Construction Tools PC AB No
LCD 500,1500 Spare parts list Handheld core drills LCD 500 LCD 500 LCD 1500 Valid from serial number BGF0006875 BGF0006875 BGF0006875 2015 Construction Tools PC AB No. 3392 5193 01 2015-06 General information
More informationViega PEX Manifold Plumbing Systems
Viega PureFlow ViegaPEX Tubing Viega PEX Manifold Plumbing Systems MANABLOC Mounting Straps Pair of mounting straps with screws Pre-drilled to mount on 16" center studs ViegaPEX tubing is rated at 100
More informationVCB22, 5/2 Solenoid actuated In-line spool valves
, / olenoid actuated nline spool valves >> ort size:, /... / ( ) >> ew design for industrial automation >> igh flow rate >> onnector with light as standard >> aintenancefree >> ubbase system for easy assembly
More informationFront View. Right Section View. Back View. Assy. Number Assy. Description A Control unit, MDU. Date 08.
18 av 94-2013-11-05 Front View Right Section View Back View 2011-10-14 Date 08 Revision Drawn KRT 6400007 Control unit, MDU 1:2 19 av 94-2013-11-05 1 Tighten lens nuts very carefully, lenses break easily
More informationFront Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
More information14 Pressure Measurement. Measuring Devices Description Pressure range Connection Device Page
Measuring Devices Pressure range Connection Device Page Digital display mounting, für niedrige Drücke 0 2. mbar / 2. bar 4 mm tube MPV, MPA.02 portable, hand-operated 0 1 mbar / 10 bar 4 mm tube MHA.03
More informationØ 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
More informationAssembly and Maintenance
Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines
More informationFront Load Dual Sensor
INFICON Front Load Dual crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The dual sensor provides a backup crystal and is essential
More informationInsertion Flowmeter for compressed air and gases DN50 - DN700 (2-28 )
The flow meter is based on the thermal mass flow measurement and is ideal for measuring the flow of compressed air and gases in pipes from DN50 (2 ) to DN700 (28 ). With the, the consumption of compressed
More informationFront Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
More informationWe provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
More informationQuick Fitting Type Check Valve. Check Valve. Release ring (polyacetal) Metalic body (nickel-plated brass) Elastic sleeve (nitrile rubber)
Features The heck Valve permits the air flow in one direction but checks the flow in the opposite direction, thus keeping the output pressure at a constant level. The heck Valve can keep the service pressure
More informationFluoropolymer Piping Equipment
luoropolymer Piping quipment New luoropolymer ittings yper ittings Series LQ luoropolymer ittings yper ittings / lare Type Series LQ New have have also also been been added added! d! New P New P Needle
More informationFluoropolymer Fittings Hyper Fitting / Flare Type
Fluoropolymer Fittings yper Fitting / Flare Series KK D S QR Flare type collet construction 00 compatible xcellent heat resistance ase of installation Triple-seal xcellent flow-through characteristics
More informationAIR TERMINALS: COPPER
AIR TERMINALS: COPPER A ADAPTER TYPE B LESS ADAPTER LA TYPE A B C A B C A B C 3 8 COPPER POINTS (CLASS I ONLY) 1 2 COPPER POINTS (CLASS I OR II) 5 8 COPPER POINTS (CLASS I OR II) THE 3 8 COPPER AND ALUMINUM
More informationICO4S 2/2, 3/2 or 5/2 poppet valves electromagnetic actuated, directly controlled
ICO4S /, / or 5/ poppet valves > > Port size: /4... /4 (ISO G/NPT) or manifold version > > Reliable and long life, ideal for a one time installation > > Direct acting solenoid valve for the control of
More informationFortiCam SD20 Mounting Guide
FortiCam SD20 Mounting Guide FortiCam SD20 Mounting Guide April 14, 2016 Copyright 2016 Fortinet, Inc. All rights reserved. Fortinet, FortiGate, FortiCare and FortiGuard, and certain other marks are registered
More information4SP/6SP Series. One Piece Bite-the-Wire Spiral Hose Ends. For use with H464, H470 and H485 Hose. Marketing Catalog
For use with 464, 470 and 485 ose Marketing Catalog One Piece Bite-the-Wire Spiral ose Ends 4SP/6SP Series ose Ends eavy wall thickness maintained 4-SPIR or 6-SPIR and hose size stenciled on socket Bite-the-Wire
More information