PNEUMATICS FITTINGS See easy to make a connection on page Technical Specification shown on pages
|
|
|
- Prosper Henderson
- 6 years ago
- Views:
Transcription
1 PNEUMATICS FITTINGS Super Speedfit Push-in fittings have been specially designed for miniature pneumatics applications. They provide a fast and secure way of connecting tubes and offer considerable advantages over conventional fittings. Complex tubing systems can be assembled more rapidly than with traditional methods and because Super Speedfit fittings are easy to disconnect, fault finding and maintenance become much easier operations. They are particularly useful for development, testing or training programmes where systems may need to be constantly reconfigured. To make a connection, the tube is simply pushed in by hand; the unique John Guest collet locking system holds the tube firmly in place without deforming it or restricting flow. See easy to make a connection on page Technical Specification shown on pages
2 USER BENEFITS Specially designed for pneumatics Suitable for plastic and soft metal tubes Grips before it seals Quick disconnection and reusable No tools needed Quality Manufacturer - ISO 9001 listed since 1989 Superior flow characteristics Collet cover prevents accidental disconnection and allows colour coding Fittings with prefix PM or PI are produced exclusively in Food and Drug Administration approved materials and are therefore recommended for food quality applications 26
3 Pneumatics Metric Size Fittings SuperThread Selected metric size items have SuperThread, a unique thread seal developed by John Guest to enable male adaptors to be used with a variety of female thread forms. John Guest fittings with brass bodies incorporating the SuperThread can be used with BSP (Parallel), BSPT (Taper), NPTF, PF and PT metal thread forms. The special Polyurethane seal feature means no sealant need be applied to make an airtight joint. There is no danger of tape entering the system. Fittings with SuperThread also have countersunk throughbores to provide superior flow characteristics. The design allows for a smaller compact body and reduced hexagon size. Maximum Torque Values for SuperThread are shown on page 62. SuperThread fits all these metal thread forms. BSP BSPT NPT PT PF 27
4 STRAIGHT ADAPTOR / SUPERTHREAD With integral seal. Thread can be used with BSP, BSPT, NPT, PF and PT. SUPER THREAD RM x 1/8 RM x 1/4 RM x 1/8 RM x 1/4 RM x 1/8 RM x 1/4 RM x 1/8 RM x 1/4 RM x 3/8 RM x 1/4 RM x 3/8 RM x 1/2 RM x 3/8 RM x 1/2 STRAIGHT ADAPTOR / METRIC THREAD METRIC THREAD RM0104M5 4 x M5 RM0105M5 5 x M5 RM0106M5 6 x M5 BRASS STRAIGHT ADAPTOR / BSP THREAD BSP MM x 1/8 MM x 1/8 MM x 1/4 MM x 1/4 28
5 STRAIGHT ADAPTOR / BSP THREAD BSP PM010411E 4 x 1/8 PM010412E 4 x 1/4 PM010511E 5 x 1/8 PM010512E 5 x 1/4 PM010611E 6 x 1/8 PM010612E 6 x 1/4 PM010811E 8 x 1/8 PM010812E 8 x 1/4 PM010813E 8 x 3/8 PM011012E 10 x 1/4 PM011013E 10 x 3/8 PM011014E 10 x 1/2 PM011213E 12 x 3/8 PM011214E 12 x 1/2 STRAIGHT ADAPTOR / BSPT THREAD BSPT PM010401E 4 x 1/8 PM010402E 4 x 1/4 PM010501E 5 x 1/8 PM010502E 5 x 1/4 PM010601E 6 x 1/8 PM010602E 6 x 1/4 PM010801E 8 x 1/8 PM010802E 8 x 1/4 PM010803E 8 x 3/8 PM011002E 10 x 1/4 PM011003E 10 x 3/8 PM011004E 10 x 1/2 PM011203E 12 x 3/8 PM011204E 12 x 1/2 NPTF PM010622E 6 x 1/4 EQUAL STRAIGHT CONNECTOR RM0404E 4 RM0405E 5 RM0406E 6 RM0408E 8 RM0410E 10 RM0412E 12 29
6 EQUAL STRAIGHT CONNECTOR PM0404E 4 PM0405E 5 PM0406E 6 PM0408E 8 PM0410E 10 PM0412E 12 REDUCING STRAIGHT CONNECTOR PM200604E 6-4 PM200804E 8-4 PM200806E 8-6 PM201004E 10-4 PM201006E 10-6 PM201008E 10-8 PM201208E 12-8 PM201210E EQUAL ELBOW RM0304E 4 RM0305E 5 RM0306E 6 RM0308E 8 RM0310E 10 RM0312E 12 EQUAL ELBOW PM0304E 4 PM0305E 5 PM0306E 6 PM0308E 8 PM0310E 10 PM0312E 12 For accessories see page
7 REDUCING ELBOW CONNECTOR PM210604E 6-4 PM210804E 8-4 PM210806E 8-6 PM211004E 10-4 PM211006E 10-6 PM211008E 10-8 PM211208E 12-8 PM211210E STEM ELBOW STEM PM220404E 4-4 PM220505E 5-5 PM220606E 6-6 PM220808E 8-8 PM221010E PM221212E SWIVEL ELBOW / SUPERTHREAD SUPER THREAD With integral seal. Thread can be used with BSP, BSPT, NPT, PF and PT. RM x 1/8 RM x 1/4 RM x 1/8 RM x 1/4 RM x 1/8 RM x 1/4 RM x 1/4 RM x 3/8 RM x 3/8 RM x 1/2 SWIVEL ELBOW / METRIC THREAD METRIC THREAD RM0904M5 4 x M5 RM0906M5 6 x M5 31
8 SWIVEL ELBOW / BSP THREAD BSP MM x 1/8 MM x 1/8 MM x 1/4 MM x 1/4 SWIVEL ELBOW / BSP THREAD STEM THREAD BSP PM090411E 4 x 1/8 PM090412E 4 x 1/4 PM090511E 5 x 1/8 PM090512E 5 x 1/4 PM090611E 6 x 1/8 PM090612E 6 x 1/4 PM090811E 8 x 1/8 PM090812E 8 x 1/4 PM090813E 8 x 3/8 PM091012E 10 x 1/4 PM091013E 10 x 3/8 PM091014E 10 x 1/2 PM091213E 12 x 3/8 PM091214E 12 x 1/2 Swivel Elbows/Tees can be made up by using an Equal Elbow (page 30), Equal Tee (page 33) and the appropriate Stem Adaptor (pages 37 and 38). For sizes 15mm - 28mm see pages
9 SWIVEL ELBOW / BSPT THREAD BSPT PM090401E 4 x 1/8 PM090402E 4 x 1/4 PM090501E 5 x 1/8 PM090502E 5 x 1/4 PM090601E 6 x 1/8 PM090602E 6 x 1/4 PM090801E 8 x 1/8 PM090802E 8 x 1/4 PM090803E 8 x 3/8 PM091002E 10 x 1/4 PM091003E 10 x 3/8 PM091004E 10 x 1/2 PM091203E 12 x 3/8 PM091204E 12 x 1/2 EQUAL TEE RM0204E 4 RM0205E 5 RM0206E 6 RM0208E 8 RM0210E 10 RM0212E 12 EQUAL TEE PM0204E 4 PM0205E 5 PM0206E 6 PM0208E 8 PM0210E 10 PM0212E 12 33
10 SWIVEL TEE / CENTRE LEG BSP THREAD BSP PM100411E 4 x 1/8 PM100412E 4 x 1/4 PM100511E 5 x 1/8 PM100512E 5 x 1/4 PM100611E 6 x 1/8 PM100612E 6 x 1/4 PM100811E 8 x 1/8 PM100812E 8 x 1/4 PM100813E 8 x 3/8 PM101012E 10 x 1/4 PM101013E 10 x 3/8 PM101014E 10 x 1/2 PM101213E 12 x 3/8 PM101214E 12 x 1/2 SWIVEL TEE / CENTRE LEG BSPT THREAD BSPT PM100401E 4 x 1/8 PM100402E 4 x 1/4 PM100501E 5 x 1/8 PM100502E 5 x 1/4 PM100601E 6 x 1/8 PM100602E 6 x 1/4 PM100801E 8 x 1/8 PM100802E 8 x 1/4 PM100803E 8 x 3/8 PM101002E 10 x 1/4 PM101003E 10 x 3/8 PM101004E 10 x 1/2 PM101203E 12 x 3/8 PM101204E 12 x 1/2 Swivel Elbows/Tees can be made up by using an Equal Elbow (page 30), Equal Tee (page 33) and the appropriate Stem Adaptor (pages 37 and 38). For accessories see page
11 SWIVEL MALE RUN TEE / BSP THREAD BSP PM110411E 4 x 1/8 PM110412E 4 x 1/4 PM110511E 5 x 1/8 PM110512E 5 x 1/4 PM110611E 6 x 1/8 PM110612E 6 x 1/4 PM110811E 8 x 1/8 PM110812E 8 x 1/4 PM110813E 8 x 3/8 PM111012E 10 x 1/4 PM111013E 10 x 3/8 PM111014E 10 x 1/2 PM111213E 12 x 3/8 PM111214E 12 x 1/2 SWIVEL MALE RUN TEE / BSPT THREAD BSPT PM110401E 4 x 1/8 PM110402E 4 x 1/4 PM110501E 5 x 1/8 PM110502E 5 x 1/4 PM110601E 6 x 1/8 PM110602E 6 x 1/4 PM110801E 8 x 1/8 PM110802E 8 x 1/4 PM110803E 8 x 3/8 PM111002E 10 x 1/4 PM111003E 10 x 3/8 PM111004E 10 x 1/2 PM111203E 12 x 3/8 PM111204E 12 x 1/2 BRASS BULKHEAD CONNECTOR RM RM
12 BULKHEAD CONNECTOR RM RM BULKHEAD CONNECTOR PM1204E 4 PM1205E 5 PM1206E 6 PM1208E 8 PM1210E 10 PM1212E 12 REDUCER STEM PM060504E 5-4 PM060604E 6-4 PM060605E 6-5 PM060804E 8-4 PM060805E 8-5 PM060806E 8-6 PM061006E 10-6 PM061008E 10-8 PM061208E 12-8 PM061210E Swivel Elbows/Tees can be made up by using an Equal Elbow (page 30), Equal Tee (page 33) and the appropriate Stem Adaptor (pages 37 and 38). For sizes 15mm - 28mm see pages
13 ENLARGER STEM PM130405E 5 x 4 PLUG 4mm - 12mm sizes in red. 8mm size also available in black Part No. PM0808E STEM PM0804R 4 PM0805R 5 PM0806R 6 PM0808R 8 PM0810R 10 PM0812R 12 STEM ADAPTOR / SUPERTHREAD With integral seal. Thread can be used with BSP, BSPT, NPT, PF and PT. SUPER THREAD RM x 1/4 RM x 1/4 STEM ADAPTOR / METRIC THREAD METRIC THREAD RM0504M5 4 x M5 37
14 STEM ADAPTOR / BSP THREAD STEM THREAD BSP PM050411E 4 x 1/8 PM050412E 4 x 1/4 PM050511E 5 x 1/8 PM050512E 5 x 1/4 PM050611E 6 x 1/8 PM050612E 6 x 1/4 PM050811E 8 x 1/8 PM050812E 8 x 1/4 PM050813E 8 x 3/8 PM051012E 10 x 1/4 PM051013E 10 x 3/8 PM051014E 10 x 1/2 PM051213E 12 x 3/8 PM051214E 12 x 1/2 STEM ADAPTOR / BSPT THREAD STEM THREAD BSPT PM050401E 4 x 1/8 PM050402E 4 x 1/4 PM050501E 5 x 1/8 PM050502E 5 x 1/4 PM050601E 6 x 1/8 PM050602E 6 x 1/4 PM050801E 8 x 1/8 PM050802E 8 x 1/4 PM050803E 8 x 3/8 PM051002E 10 x 1/4 PM051003E 10 x 3/8 PM051004E 10 x 1/2 PM051203E 12 x 3/8 PM051204E 12 x 1/2 For accessories see page
15 TWO-WAY DIVIDER RM2306E 6 RM2308E 8 RM2312E 12 TO HOSE STEM STEM HOSE ID PM250604E 6-4 PM250806E 8-6 PM251008E 10-8 FEMALE ADAPTOR *PM450411E 4 x 1/8 BSP *PM450611E 6 x 1/8 BSP *PM450612E 6 x 1/4 BSP *PM450812E 8 x 1/4 BSP *PM450813E 8 x 3/8 BSP *PM451015FE 10 x 5/8 BSP *PM451215FE 12 x 5/8 BSP * With thread seal. Other size no seal. OFFSET CONNECTOR NC TWO-WAY DIVIDER PM2304E 4 PM2308E 8 PM2310E 10 39
16 For sizes 15mm - 28mm see pages
17 Banjo Flow Control Banjo Flow Controls are designed for installation directly into cylinder ports to give precise control. They regulate the speed of pneumatic cylinders and other actuators. John Guest Controls provide a neat compact assembly which can be orientated to a suitable position for the circuit arrangement prior to tightening. The design offers especially precise adjustment through the control needle which is captive within its housing. Suitable for both soft metal and plastic tubing. Maximum Torque Values are shown on page 62. Technical Specifications Temperature Range 5ºC - 70ºC Working Pressure Range 0.5 Bar to 10 Bar Materials used Acetal Copolymer, Brass, Stainless Steel and Nitrile. Filtration Air supply should be filtered to 50 micron. Typical Response Curve Response curve for Banjo Flow Control with Screwdriver slot. Pattern No. BFC360611E 1 scfm = 28.3 litres/min. or atmosphere discharge ISO : (For 6mm x 1/8 BSP Banjo Flow Control) s c f m No. of turns Banjo Flow Control Typical competitors Banjo Flow Control 41
18 BANJO FLOW CONTROL / MANUAL ADJUSTMENT CFM3604M5E 4 x M5 CFM360411E 4 x 1/8 BSP CFM360611E 6 x 1/8 BSP CFM360612E 6 x 1/4 BSP CFM360812E 8 x 1/4 BSP BANJO FLOW CONTROL / SCREWDRIVER SLOT BFC3604M5E 4 x M5 BFC360411E 4 x 1/8 BSP BFC360611E 6 x 1/8 BSP BFC360612E 6 x 1/4 BSP BFC360812E 8 x 1/4 BSP BFC361013E 10 x 3/8 BSP BFC361214E 12 x 1/2 BSP MINIATURE BANJO FLOW CONTROL / SCREWDRIVER SLOT LM1503M3E 3 x M3 42
19 Miniature Fittings A new range of 4mm fittings especially designed for miniature pneumatics applications. LM fittings are suitable for use with plastic (Polythylene, Nylon and Polyurethane) and soft metal (copper and mild steel) tubes with an outside diameter of 4mm +0.05/ The tube to have a smooth outer surface and be free from burrs. Tube inserts should be used for soft or thin wall tubing or when using Polyurethane tube above 10 Bar to a maximum of 16 Bar. M3 and M5 threaded ends are designed to be hand tightened. They should not be tightened above the maximum torque figures shown on page 62. STRAIGHT ADAPTOR / METRIC THREAD LM0103M3 3 x M3 LM0104M3 4 x M3 LM0104M5 4 x M5 STRAIGHT ADAPTOR / SUPERTHREAD LM x 1/8 With integral seal. Thread can be used with BSP, BSPT, NPT, PF and PT. EQUAL STRAIGHT CONNECTOR LM0403E 3 LM0404E 4 43
20 EQUAL ELBOW LM0303E 3 LM0304E 4 SWIVEL ELBOW / METRIC THREAD METRIC THREAD LM0903M3 3 x M3 LM0904M3 4 x M3 LM0904M5 4 x M5 EQUAL TEE LM0203E 3 LM0204E 4 INSERT LMTS
21 Pneumatics Imperial Size Fittings Produced in a grey acetal copolymer in sizes 5/32 to 1/2. They provide a fast, secure way of connecting tube using the well established Speedfit Concept. STRAIGHT ADAPTOR / BSPT THREAD BSPT PM010401S 5/32 x 1/8 PM010402S 5/32 x 1/4 PI010601S 3/16 x 1/8 PI010602S 3/16 x 1/4 PI010801S 1/4 x 1/8 PI010802S 1/4 x 1/4 PM010801S 5/16 x 1/8 PM010802S 5/16 x 1/4 PM010803S 5/16 x 3/8 PI011202S 3/8 x 1/4 PI011203S 3/8 x 3/8 PI011603S 1/2 x 3/8 PI011604S 1/2 x 1/2 STRAIGHT ADAPTOR / BSP THREAD BSP For use with spot face ports. PI010812S 1/4 x 1/4 PI011212S 3/8 x 1/4 PI011213S 3/8 x 3/8 PI011613S 1/2 x 3/8 STRAIGHT ADAPTOR / BSP THREAD BSP With special large seal for use with chamfered face ports. NCPI011211S 3/8 x 1/8 NCPI011212S 3/8 x 1/4 45
22 STRAIGHT ADAPTOR / NPTF THREAD NPTF PM010421S 5/32 x 1/8 PM010422S 5/32 x 1/4 PI010621S 3/16 x 1/8 PI010821S 1/4 x 1/8 PI010822S 1/4 x 1/4 PI010823S 1/4 x 3/8 PM010821S 5/16 x 1/8 PM010822S 5/16 x 1/4 PM010823S 5/16 x 3/8 PI011221S 3/8 x 1/8 PI011222S 3/8 x 1/4 PI011223S 3/8 x 3/8 PI011224S 3/8 x 1/2 PI011623S 1/2 x 3/8 PI011624S 1/2 x 1/2 PI012026S 5/8 x 3/4 EQUAL STRAIGHT CONNECTOR PM0404S 5/32 PI0406S 3/16 PI0408S 1/4 PM0408S 5/16 PI0412S 3/8 PI0416S 1/2 REDUCING STRAIGHT CONNECTOR PI200806S 1/4-3/16 PM200804S 5/16-5/32 PI201006S 5/16-3/16 PI201008S 5/16-1/4 PI201206S 3/8-3/16 PI201208S 3/8-1/4 PI201210S 3/8-5/16 PI /2-1/4 PI201610S 1/2-5/16 PI201612S 1/2-3/8 46
23 EQUAL ELBOW PM0304S 5/32 PI0306S 3/16 PI0308S 1/4 PM0308S 5/16 PI0312S 3/8 PI0316S 1/2 REDUCING ELBOW PM210804S 5/16-5/32 PI211006S 5/16-3/16 PI211008S 5/16-1/4 PI211206S 3/8-3/16 PI211208S 3/8-1/4 PI211210S 3/8-5/16 PI211610S 1/2-5/16 PI211612S 1/2-3/8 STEM ELBOW STEM PM220404S 5/32-5/32 PI220606S 3/16-3/16 PI220808S 1/4-1/4 PM220808S 5/16-5/16 PI221206S 3/8-3/16 PI221208S 3/8-1/4 PI221210S 3/8-5/16 PI221212S 3/8-3/8 PI221616S 1/2-1/2 For accessories see page
24 RIGID ELBOW / NPTF THREAD NPTF PI480821S 1/4 x 1/8 PI480822S 1/4 x 1/4 PI480823S 1/4 x 3/8 PI481022S 5/16 x 1/4 PI481023S 5/16 x 3/8 PI481222S 3/8 x 1/4 PI481223S 3/8 x 3/8 PI482024S 5/8 x 1/2 SWIVEL ELBOW / BSPT THREAD BSPT PI090601S 3/16 x 1/8 PI090801S 1/4 x 1/8 PI090802S 1/4 x 1/4 PM090801S 5/16 x 1/8 PM090802S 5/16 x 1/4 PM090803S 5/16 x 3/8 PI091202S 3/8 x 1/4 PI091203S 3/8 x 3/8 PI091603S 1/2 x 3/8 PI091604S 1/2 x 1/2 SWIVEL ELBOW / NPTF THREAD NPTF PM090421S 5/32 x 1/8 PM090422S 5/32 x 1/4 PI090621S 3/16 x 1/8 PI090821S 1/4 x 1/8 PI090822S 1/4 x 1/4 PM090821S 5/16 x 1/8 PM090822S 5/16 x 1/4 PM090823S 5/16 x 3/8 PI091222S 3/8 x 1/4 PI091223S 3/8 x 3/8 PI091623S 1/2 x 3/8 PI091624S 1/2 x 1/2 Swivel Elbows/Tees can be made up by using an Equal Elbow (page 47), Equal Tee (page 49) and the appropriate Stem Adaptor (page 53). 48
25 EQUAL TEE PM0204S 5/32 PI0206S 3/16 PI0208S 1/4 PM0208S 5/16 PI0212S 3/8 PI0216S 1/2 REDUCING TEE ENDS BRANCH PI301208S 3/8-1/4 PI301612S 1/2-3/8 SWIVEL BRANCH TEE / BSPT THREAD BSPT PI100601S 3/16 x 1/8 PI100801S 1/4 x 1/8 PI100802S 1/4 x 1/4 PM100801S 5/16 x 1/8 PM100802S 5/16 x 1/4 PM100803S 5/16 x 3/8 PI101202S 3/8 x 1/4 PI101203S 3/8 x 3/8 PI101603S 1/2 x 3/8 PI101604S 1/2 x 1/2 SWIVEL BRANCH TEE / NPTF THREAD NPTF PM100421S 5/32 x 1/8 PM100422S 5/32 x 1/4 PI100621S 3/16 x 1/8 PI100821S 1/4 x 1/8 PI100822S 1/4 x 1/4 PM100821S 5/16 x 1/8 PM100822S 5/16 x 1/4 PM100823S 5/16 x 3/8 PI101222S 3/8 x 1/4 PI101223S 3/8 x 3/8 PI101623S 1/2 x 3/8 PI101624S 1/2 x 1/2 49
26 SWIVEL MALE RUN TEE / BSPT THREAD BSPT PI110601S 3/16 x 1/8 PI110801S 1/4 x 1/8 PI110802S 1/4 x 1/4 PM110801S 5/16 x 1/8 PM110802S 5/16 x 1/4 PM110803S 5/16 x 3/8 PI111202S 3/8 x 1/4 PI111203S 3/8 x 3/8 PI111603S 1/2 x 3/8 PI111604S 1/2 x 1/2 SWIVEL MALE RUN TEE / NPTF THREAD NPTF PM110421S 5/32 x 1/8 PM110422S 5/32 x 1/4 PI110621S 3/16 x 1/8 PI110821S 1/4 x 1/8 PI110822S 1/4 x 1/4 PM110821S 5/16 x 1/8 PM110822S 5/16 x 1/4 PM110823S 5/16 x 3/8 PI111222S 3/8 x 1/4 PI111223S 3/8 x 3/8 PI111623S 1/2 x 3/8 PI111624S 1/2 x 1/2 Swivel Elbows/Tees can be made up by using an Equal Elbow (page 47), Equal Tee (page 49) and the appropriate Stem Adaptor (page 53). 50
27 FEMALE ADAPTOR / BSP THREAD - FLAT END BSP PI451014FS 5/16 x 1/2 PI451015FS 5/16 x 5/8 PI451213S 3/8 x 3/8 PI451214FS 3/8 x 1/2 PI451215FS 3/8 x 5/8 PI451613S 1/2 x 3/8 PI451615FS 1/2 x 5/8 FEMALE ADAPTOR / NPTF THREAD NPTF PI450822S 1/4 x 1/4 PI451222S 3/8 x 1/4 THREE WAY DIVIDER INLET OUTLET PI491612S 1/2-3/8 PI491616S 1/2-1/2 TWO-WAY DIVIDER PI2308S 1/4 PM2308S 5/16 PI2312S 3/8 PI2316S 1/2 51
28 UNEQUAL TWO-WAY DIVIDER INLET OUTLET PI241210S 3/8-5/16 BULKHEAD CONNECTOR PM1204S 5/32 PI1206S 3/16 PI1208S 1/4 PM1208S 5/16 PI1212S 3/8 PI1216S 1/2 REDUCING BULKHEAD CONNECTOR PI121208S 3/8-1/4 For accessories see page
29 STEM ADAPTOR / BSPT THREAD STEM THREAD BSPT PI050601S 3/16 x 1/8 PI050801S 1/4 x 1/8 PI050802S 1/4 x 1/4 PM050801S 5/16 x 1/8 PM050802S 5/16 x 1/4 PM050803S 5/16 x 3/8 PI051202S 3/8 x 1/4 PI051203S 3/8 x 3/8 PI051603S 1/2 x 3/8 PI051604S 1/2 x 1/2 STEM ADAPTOR / BSP THREAD STEM THREAD BSP PM050812S 5/16 x 1/4 PI051212S 3/8 x 1/4 PI051213S 3/8 x 3/8 STEM ADAPTOR / NPTF THREAD STEM THREAD NPTF PM050421S 5/32 x 1/8 PM050422S 5/32 x 1/4 PI050621S 3/16 x 1/8 PI050821S 1/4 x 1/8 PI050822S 1/4 x 1/4 PI050823S 1/4 x 3/8 PM050821S 5/16 x 1/8 PM050822S 5/16 x 1/4 PM050823S 5/16 x 3/8 PI051222S 3/8 x 1/4 PI051223S 3/8 x 3/8 PI051623S 1/2 x 3/8 PI051624S 1/2 x 1/2 53
30 REDUCER STEM PI060605S 3/16-5/32 PI061006S 5/16-3/16 PI061008S 5/16-1/4 PI061206S 3/8-3/16 PI061208S 3/8-1/4 PI061210S 3/8-5/16 PI061610S 1/2-5/16 PI061612S 1/2-3/8 ENLARGER STEM PI131012S 5/16-3/8 PI131216S 3/8-1/2 OFFSET CONNECTOR NC641 1/2-5/16 CROSS PI4712S 3/8 54
31 U-BEND PIUB12S 3/8 PIUB16S 1/2 END STOP PI4608S 1/4 PI4612S 3/8 PLUG STEM PM0804S 5/32 PI0806S 3/16 PI0808S 1/4 PM0808S 5/16 PI0812S 3/8 PI0816S 1/2 55
32 TO HOSE STEM STEM HOSE ID PI250806S 1/4-3/16 PI250808S 1/4-1/4 PI250810S 1/4-5/16 PI251006S 5/16-3/16 PI251008S 5/16-1/4 PM250808S 5/16-5/16 PI251012S 5/16-3/8 PI251208S 3/8-1/4 PI251210S 3/8-5/16 PI251212S 3/8-3/8 PI251216S 3/8-1/2 PI251612S 1/2-3/8 PI251616S 1/2-1/2 TO HOSE ELBOW STEM HOSE ID PI290808S 1/4-1/4 PI290810S 1/4-5/16 PI291008S 5/16-1/4 PM290808S 5/16-5/16 PI291208S 3/8-1/4 PI291210S 3/8-5/16 For accessories see page
Compressed Air Systems Pneumatic Fittings LLDPE Tube
John Guest Limited Horton Road, West Drayton, Middlesex UB7 8JL, England Tel: 01895 449233 Fax: 01895 420321. www.johnguest.com and are registered trademarks of John Guest International Limited Copyright
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING - CONTENTS Compressed Air Technical Information 518 Compressed Air Fittings 519 Brass Compressed Air Fittings 520 Compressed Air Pipe & Accessories 521 Accessories
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING. Compressed Air Technical Information 562. Compressed Air Fittings 563. Brass Compressed Air Fittings 564
JOHN GUEST SPEEDFIT, AIR PRODUCTS & PLUMBING Compressed Air Technical Information 562 Compressed Air Fittings 563 Brass Compressed Air Fittings 564 Compressed Air Pipe & Accessories 565 ELEVEN Accessories
COMPRESSED AIR FITTINGS AND PIPE PNEUMATIC FITTINGS CARTRIDGES LLDPE TUBE. Product List
COMPRESSED AIR FITTINGS AND PIPE PNEUMATIC FITTINGS CARTRIDGES LLDPE TUBE Product List JANUARY 2016 The John Guest Group has a long established reputation as a world leading manufacturer of pushfit fittings,
Compression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
pneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
JOHN GUEST SPEEDFIT FITTINGS
G6300 JOHN GUEST SPEEDFIT FITTINGS Grey acetyl copolymer construction with nitrile o-rings. FDA approved materials on all wetted surfaces. Meet NSF International Standards 51 and 61. Part Cross Pipe PRICE
LF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
10 series (Pneufit) Push-in fittings Ø mm tube size, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm tube size, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
UNITED STATES MEXICO CANADA
www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.
10 series (Pneufit) Push-in fittings Ø mm O/D tube, BSP threads
0 series (Pneufit) Push-in fittings Ø 4... 4 mm O/D tube, SP threads Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All SP taper threads pre-coated
1COMPRESSION FITTINGS
SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and
Composite Push-In Fittings - NPTF/INCH
composite FITTINGS Composite Push-In Fittings - F/INCH Tube diameter: Ø /8", 5/32", /4", 5/6", 3/8", /2" Connections /8, /4, 3/8, /2 F These new models have been released in technopolymer, maintaining
PNEUFIT 10 series Push-in fittings
PNUFIT 0 series > > Port size: Ø 4... 4 mm O/D tube, SP threads > > Very compact units > > asy tube insertion for rapid assembly of pneumatic circuits > > Straight adaptors feature internal hexagon for
BSP & HOSE Fittings M5, 1/8... 1
SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors
push-to-connect fittings system LF3000
legris products are available from: MARYAD MTRIS push-to-connect fittgs system 3000 Order from: Maryland Metrics email: techfo@mdmetric.com ph. (800)638-1830 fx. (800)87-939 prciple of system 3000 legris
LF 3600 Nickel-Plated Brass Instant Fittings
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding 00 Nickel-Plated Brass Instant ittings One fitting for all industrial
brass compression fittings
compression fittings principle of universal compression fittings The range is called universal as it offers the maximum number of direct fitting alternatives with the minimum number of components. Tube
Quality, Precision and Unbeatable Value!
PUSH IN FITTINGS 31 RX Push In Fittings 1 High quality Push In Fittings in composite materials or all nickel plated brass. 100% leak tested during production, these fittings are suitable for both pneumatic
pneumatic function valves
pneumatic function valves Fluidline omponents, Inc lawson, MI 48017 www.legris.com flow control regulators meter out version meter in version bi-directional version fine adjustment screw locknut fine adjustment
Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube
Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/ tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range
Compression Fittings 34 Series Inch
4 Series /6" O/ l Wide range of types and sizes l Rugged and durable l Suitable for use under extreme conditions of pressure and temperature l Ideal for most general industrial applications Technical ata
Pipe Swivels. The Fitting Authority
Pipe Swivels The Fitting Authority 0507 007 007 3507 Straights 45 Elbows 307 307 507 5507 07 NPT / NPSM Swivel 90 Elbows 5607 NPT / NPSM Swivel Long Drop 07 077T NPSM Swivel / NPSM Swivel / NPSM Swivel
15 and 16 Series BSP and hose fittings
SP and hose fittings > > Port size: M5, 1/8... 1 > > xtensive range of shapes and sizes including manifolds > > High temperature and pressure copper sealing washers supplied with ISO threads Technical
PNEUMATIC TUBING FITTING
2011 PNEUMATIC TUBING FITTING CATALOGUE FLYTECH ENGINEERING SDN BHD GENERAL INFORMATION Flytech had cooperated with ISAIAH GROUP from Taiwan to promote the Pneumatic Fitting & Tubing. The company takes
/ Push-to-conect fittings/ V TOPRING. Push-to-connect fittings Tubings Mufflers
96.830 / Push-to-conect fittings/ V. 09.6.06 TOPRING Push-to-connect fittings s Mufflers TOPFIT POLYMER PUSH-TO-CONNECT FITTINGS SERIES 40 4 MAXFIT POLYMER PUSH-TO-CONNECT FITTINGS SERIES 44 46 TOPFIT
Code Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)
411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption
Poly-Tite Fittings. Order By part number and name.
oly-tite ittings Advantages A compact brass compression fitting designed to speed any installation. Body, nut and sleeve are furnished pre-assembled, ready for installation. An exclusive acetal copolymer
Stainless One-touch Fittings. Applicable Tubing. Tube material Tube O.D. Specifications. Thread Nut Sealant (Thread portion) Component Materials
Stainless One-touch Fittings Series KG Guide Collet Chuck Accepts nylon, soft nylon and polyurethane tubes. as large retaining force. Chuck certainly bites tube and collet increases retaining force. Release
Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE. What You Measure, We Manage
Specialist Suppliers of Gas Analysis Equipment FITTINGS AND TUBING CATALOGUE What You Measure, We Manage ABOUT US ABOUT US DRM Technic is a global manufacturer and supplier of gas analysis solutions and
COMPRESSED AIR SYSTEM ½" TO 2½" Quick-Lock Tubing
COMPRESSED AIR SYSTEM ½" TO 2½" Quick-Lock Tubing Why Gardner Denver? Simply stated There is no equal Quick-Lock from Gardner Denver has taken piping systems to a new level. Without compromising any structural
How to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number
Viega PEX Manifold Plumbing Systems
Viega PureFlow ViegaPEX Tubing Viega PEX Manifold Plumbing Systems MANABLOC Mounting Straps Pair of mounting straps with screws Pre-drilled to mount on 16" center studs ViegaPEX tubing is rated at 100
PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
How to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Measure the thread diameter with an / caliper. When
Flareless Bite Type Fittings
Ferulok Flareless Bite Type Fittings Ferulok Flareless Bite Type Fittings 4300 atalog BU TU WLN HBU Nut Ferrules Bulkhead Locknut Union Nuts, Ferrules, Locknuts Straights 7 7 7 7 WBU F5BU FBU GBU TRBU
Series Variations. General Purpose Fittings Series. Fittings & Tubing. Fittings. One-touch Fittings KQ2 Series. One-touch Fittings KQ2 Series
& One-touch connection and release Possible to use in vacuum to 00 kpa ø2 Sealant/Gasket seal Metric size tube/m, R, Rc thread connection M3 M6 2 General Purpose Series Face seal Metric size tube/g thread
Accessories for Lubrication Systems Product Catalogue
Accessories for Lubrication Systems Product Catalogue Productivity is key in today s global economy. Proper lubrication increases uptime and makes maintenance routines simple. Accessories for Lubrication
Quick-Lock Tubing. Total Solutions for Air, Vacuum & Inert Gas Systems
Quick-Lock Tubing Total Solutions for Air, Vacuum & Inert Gas Systems 2 High Quality Aluminum Piping Systems Compressed Air Piping - Blue 14 mm -.5" Tubing (10 Pack - 8 ft Length) 80 ft C9000-14-BLUE-PK10
PL Nickel-Plated Brass Spigot Fitting Range
P Nickel-Plated Brass Spigot itting Range P nickel-plated Brass Spigot ittings Stud ittings BP 3BP 4BP BSPP 8BP Metric BP 3BP 4BP BSPP 8BP Metric RBP R3BP SBP S3BP Banjo itting Tube-to-Tube ittings omplementary
Timken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly
Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication
Assembly and Maintenance
Assembly and Maintenance Assembly and Maintenance Test Pumps Pressure Test Pumps Tests all types of installations such as heating, compressed air and refrigeration systems, oil installations, fire lines
TOOLS AND ACCESSORIES FOR USE WITH CLEANROOM VACUUM CLEANER SYSTEMS LIST
OPTIONAL Ø1.25" (Ø32mm) TOOLS AND ACCESSORIES - FOR USE WITH CLEANROOM 323331 WANDS 1.25"(32mm) STAINLESS (SET OF 2) - ONE CURVED AND ONE STRAIGHT 323330 EXTENSION WANDS, BOTH STRAIGHT, (SET OF 2), Ø1.25"(32mm)
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity.
We provide superior performing compressed air & gas systems with engineered longevity to reduce operating costs and improve productivity. ENGINEERED FOR SUPERIOR PERFORMANCE Compressed Air & Gas Systems
GEM TOOL ORDER FORM SAUGERTIES, NY 12477
ALUMINUM PIPING UNION 20 MM 19.7 D1 ALR TU20L6 $ 52.54 20 MM 4A ALR UN 20 $ 9.77 25 MM 19.7 D2 ALR TU25L6 $ 63.38 25 MM 4B ALR UN 25 $ 12.17 32 MM 19.7 D3 ALR TU32L6 $ 97.50 32 MM 4C ALR UN 32 $ 17.24
a World of Connection PLASSIM FITTINGS
PLASSIM FITTINGS C A T A L O G U E Water Distribution 2 Irrigation 12 Telecom 22 Box sizes 27 x 18 x 24 cm A-2 x 28 x 24 cm A-3 48 x 33 x 24 cm A-4 51 x 41 x 41 cm A-5 48 x 33 x 27 cm A-6 51 x 41 x 41
Insert Fittings. KF Series
Insert Fittings Series A reliable seal Holds the tube tightly Insert An insert mechanism can provide reliable retaining force on tubes made of a wide variety of materials ube grip (resin sleeve) ube is
Han PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
Flow control valves Series SCU, MCU, SVU, MVU, SCO, MCO
S E R I E S SCU MCU SVU MVU SCO Flow control valves Series SCU, MCU, SVU, MVU, SCO, Unidirectional and bidirectional banjo flow controllers Ports M, G1/8, G1/4, G3/8, G1/2 A U T O M A T I C These unidirectional
Series PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
Cable entry systems for potentially explosive atmospheres
Cable entry systems for potentially explosive atmospheres Directive 94/9/EC (ATEX) ATEX stands for ATmosphère Explosible and is the short name for the European Directive 94/9/EC, regulating the market
precision pipe fittings
Precision Pipe Fittings 1 8 to 1 sizes 316 stainless steel, brass, and exotic materials NPT threads HOKE Inc. PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com
aircf03 mini Groz Engineering Tools (P) Ltd. Groz Net Industries
mini aircf03 Groz Engineering Tools (P) Ltd. Groz Net Industries Village Kherki Daula, National Highway-8 Gurgaon-122001, Haryana, INDIA TEL +91.124.282.7700 / 221.4050 FAX +91.124.2827986 / 221.4224 FAX
Cable Entry Systems for Potentially Explosive Atmospheres
Cable Entry Systems for Potentially Explosive Atmospheres Directive 94/9/EC (ATEX) KEL-ER KVT 80 ATEX stands for ATmosphères EXplosives and is the short name for the European Directive 94/9/EC, regulating
Compression Style Pneumatic
Compression Style Pneumatic Compression Economical U isted Thermoplastic / Soft etal Tubing Parker etru-ok Captive Sleeve etric Tubing PT, BSPT, BSPP, etric Threads Compress-lign Captive Sleeve Two piece
Timken Lubricant Delivery Systems. Friction management solutions to keep systems running smoothly
Timken Lubricant Delivery Systems Friction management solutions to keep systems running smoothly SM G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication is
QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 460.0 976 32 10 Compatible Ind. Interchange 3/ rtc 0 Cejn 4 Parker 25F Rectus Foster 4404 AMFO C26 Hansen 440 Temperature
Fluoropolymer Piping Equipment
luoropolymer Piping quipment New luoropolymer ittings yper ittings Series LQ luoropolymer ittings yper ittings / lare Type Series LQ New have have also also been been added added! d! New P New P Needle
Rev/02/ Flared T (SAE J514) ube Fittings
Rev/02/2013 37 lared Tube ittings (SA J514) Introduction PANAM has been in the field of manufacturing precision Tube ittings and Instrumentation valves since the last Two decades. With a team of dedicated
37 Stainless Steel. A wide range of end configurations are suitable for many Hydraulic applications
JIC Prochem manufactures and supplies an extensive range of JIC Fittings and Adaptors in all configurations. 37 Stainless Steel Fittings Prochem 37 JIC Fittings and Adaptors provide a straightforward,
Wavin Hep 2 O Flexible PB Push-Fit plumbing system
Water distribution Heating and cooling PRODUCT LIST Wavin Hep 2 O Flexible PB Push-Fit plumbing system Contents 1 Hep2O Pipe Page 3 2 Hep2O Fittings Page 4 3 Hep2O Accessories Page 14 4 Making connections
Ringlock is a range of robust circular
Connectors is a range of robust circular connectors for industrial applications. It uses a metal bayonet coupling system for quick and reliable connections and thermoplastic bodies for low installed cost.
RATHETING TAPS AND DIES SETS RATCHETING TAPS & DIES Pc. Ratcheting Tap and Die Set SAE
RATHETING TAPS AND DIES 82811-65 Pc. Ratcheting Tap and Die Set SAE 82800 Large Tap and Die Ratcheting T Wrench 82801 Large Locking Tap Adapter 82802 Large Hex Die Adapter 3881 Medium Tap and Die Ratcheting
ANACONDA MULTIFLEX CONDUIT TYPE UI
ANACONDA MULTIFLEX CONDUIT TYPE UI Very robust, extremely flexible and corrosion resistant Multifl ex type UI is the stainless steel version of type UIG. Extremely fl exible and robust, this fully interlocked,
Type MIT. WEH - We Engineer Hightech. WEH Connector for pressure and vacuum testing DATA SHEET. on components with internal thread
DT SHEET D-2011/09/00027-7-3 Date: 07/2014 Type MIT WEH for pressure and vacuum testing on components with internal thread WEH - We Engineer Hightech Type MIT WEH for internal threads DT SHEET General
Sockets & Accessories
Sockets & Accessories Sidchrome socket sets give you the choice of socket you need to get the job done. Our sets have been designed with flexibility, quality and portability in mind. You can easily carry
Catalog 3501E Tube to ale PTF 169C-269C ale Elbow Union Tee Compression Style, Pneumatic 169P/269P 169P 169PS 169H 179C Elbow ale Elbow ong Elbow ale
Compression Style Pneumatic Compression Fittings... 5 Compress-lign Fittings... 13 Parker etru-ok Fittings... 20 Poly-Tite Fittings... 30 Hi-uty Flareless Tube Fittings... 42 The World Standard Catalog
RMI Temperature control
RMI Temperature control 7 nominal diameters... hot and cold water, glycol water and heat transfer fluid circuits temperature control on injection presses Safe and quick locking A large number of locking
5000 Sc. Cleaning Solution Generator Parts Manual. North America / International. DM20008 Rev. 02 (6-2012) *DM20001*
5000 Sc Cleaning Solution Generator Parts Manual North America / International www.tennantco.com DM20008 Rev. 02 (-202) *DM2000* A B Ref Part No. Serial Number Description Qty. 828 (000000- ) Bracket Wldt,
Pressure sensors SPAN
Features At a glance Communication interface Convenient design Compact design 30x30 mm Degree of protection IP40 Reduced weight with QS4 Universal pressure measurement Pressure and vacuum 13 pressure measuring
Ring lock design prevents accidental disconnection To disconnect rotate sleeve 20 degrees. Standard body material: Zinc trivalent plated steel
2RL/3RL Series Eaton s 2RL/3RL ring lock series quick disconnect pneumatic couplings have a unique interchange which Eaton designed for use with compressed air. Product Features High Flow capacity Push
Assembly instructions VOSS quick connect system 203 N
Assembly instructions VOSS quick connect system 203 N The optimized classic A. Important notices Please observe before using the quick connect system VOSS quick connect system 203 N is suitable for air
QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 461.0 976 32 10 Compatible rtc 0.0 rtc 1.0 rtc 3.0 rtc 450.0 rtc 451.0 Temperature Range Nitrile (N) FPM (V) EPDM
Mini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Precision, rigid guide Highly flexible Adjustable end position cushioning 03/10 Subject to change Products 04/05 1 / 1 Mini slides SLT/SLS/SLF Features SLS SLF SLT SLT/SLS/SLF SLT
Liquid Volume Dispenser
Liquid Volume Dispenser Table of Contents 1. Introduction 3 2. Installation 3 3. Volume Accuracy 3 4. Operator Controls 4 5. Operating States 4 5.1 Ready 4 5.2 Dispensing 5 5.3 Manual Dispensing 5 5.4
QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 464.0 976 32 10 Compatible rtc 013 Nitto Kohki & & 40 Cejn 315 Rectus 13 Temperature Range Nitrile (N) FPM (V) EPDM
Miniature Push-Pull Series Atto Miniature Push-Pull
J Miniature Push-Pull Series Atto Miniature Push-Pull Technical Data Panel connector Cable connector Coupler connector Panel connector, cable connector and coupler connector circular housing Locking Push-Pull,
Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
M12 Field Wireable Connectors. M12 CAT.6A Field Wireable Connectors. M12 Field Wireable Connectors for PROFINET
M12 Connectors Application Advantage Shielded design ETHERLINE Ethernet Cable, Connectors & Tools M12 Field Wireable Connectors Male Female Temperature Range: Max. 85 C Nominal Voltage: Nominal Current:
HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215
HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm
Accessories for control enclosures. BERNSTEIN attachment solutions. Double coupling head (console version with suspension system attachment)
25 Accessories for control enclosures BERNSTEIN attachment Single coupling head (suspended console version) Double coupling head (console version with suspension system attachment) 322.5 231 232 140 The
Economizer Regulator Filter Upgrade
Overview Chart LNG has released a new and improved economizer regulator, and filtering system. The new economizer filter system is designed to enhance reliability, and offer lower operating costs. In 2012
Inductive Cylinder Position Sensors
Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs
Clamping Device, Series 2709
Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Clamping Device, Series 2709 Technical data Pneumatic Open mechanism Technical Data Type Power transmission
VFC. Operating manual TROX air terminal units Type VFC volume flow controllers. General information 2. VFC series volume flow controllers
Type volume flow controllers series volume flow controllers General information Correct use Safety notes Area of application Operating modes Product description Installation 4 Commissioning and wiring
Intru-Lok Flareless Bite Type Fittings
Intru-ok Flareless Bite Type Fittings The Fitting Authority 400 atalog Intru-ok Flareless Bite Type Fittings uts, Ferrules, Inserts BIP Knurled ut BI ut BTI ut and Ferrule TI Ferrule TIP Expander / Insert
QUICK CONNECT TECHNOOGY www.rtctec.com Water Pneumatic Hydraulic Electrical Accessories 41.0 97 24 32 10 Compatible rtc 170.0 rtc 171.0 rtc 173.0 rtc 450.0 rtc 451.0 Temperature Range Nitrile (N) FPM (V)
SPH / MA and MA2 components MCS / MA multi-connections. Technical data sheet
SPH / MA and MA2 components MCS / MA multi-connections Technical data sheet SPH / MA and MA2 components for MCS / MA automatic multi-connections Nominal bore 04, 06, 08, 12, 15, 20, 25, 37, 50 and 75 mm
Device Configurator ECI-1
Honsberg Instruments GmbH Tenter Weg 2-8 42897 Remscheid Germany Fon +49 (0) 2191-9672 - 0 Fax - 40 www.honsberg.com info@honsberg.com Device Configurator ECI-1 Handling and operation Connection The device
MicroLab Posts, Bases, and Rails
MicroLab Posts, Bases, and Rails www.mellesgriot.com Stable mounting and positioning are required to build optical systems. In the laboratory, posts and post holders are commonly used for mounting optical
M12 connector D-coding M12 connector X-coding RJ45 IP20 connector PushPull RJ45 IP65 / IP67 connector
M12 connectors Directory Chapter Page General information....02 M12 connector D-coding....06 M12 connector X-coding....20 RJ45 IP20 connector....27 PushPull RJ45 IP65 / IP67 connector....46 Han 3 A RJ45
Combi-System. Composition pipe Copipe
Combi-System Composition pipe Copipe no. Composition pipe Copipe white rolls DN 10 x 2.0 mm length per roll 50 m 150 10 54 length per roll 100 m 150 01 54 length per roll 200 m 150 02 54 DN 12 16 x 2.0
Universal Compact Extruded Cylinders
Universal Compact Extruded Cylinders Clippard s new Compact, Extruded Body Cylinders are available in double acting, double rod, single acting spring return, and single acting spring extended models. Universally
Ideal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
Flowtronic D 607 Series
Flowtronic D 607 Series Proportional Technology www.asco.com FLOW CONTROL: 607 SERIES FLOWTRONIC D Flowtronic D Flowtronic D is a digitally operated flow controller up to 70 SCFM (2000 Nl/min). The Flowtronic
Universal Tristop Cylinder for Cam Brakes
Tristop for Cam Brakes 3rd Edition This publication is not subject to any update service. New versions are available in INFORM at www.wabco-auto.com Copyright WABCO 2006 Vehicle Control Systems An American
FF Series (Steel) ISO Interchange
Eaton s FF Series flat face is specifically designed for those applications where quick and easy connections and no-spill performance are essential. The FF Series is ideal for use when global interchangeability
Speed Controller with Fixed Orifice
P.G.Information (Specialized product) SP043M-025E P: JO Speed Controller with Fixed Orifice AS****-X250 Feature 1: 0.12mm SMC CORPORATION 1-16-4 Shimbashi, Minato-ku Tokyo 105-0004, JAPAN URL: http://www.smcworld.com
INDUSTRIAL PNEUMATICS - valves
Ball valves Mini ball valve 6560 type Body material: Ball material: Ball seal: Spindle seal: Working temp.: Nickel-plated brass Chromium-plated brass PTFE NBR From -20 C up to +80 C General purpose valve
RMI multi-couplings. Temperature control
RMI multi-couplings Temperature control Centralised s... Registered Community Design... for greater implementation speed A full range The multi-coupling range is composed of four main families corresponding