Measuring instruments and systems 2009 mechanical optical electronical

Transcription

1 Measuring instruments and systems 2009 mechanical optical electronical

2 Calipers Digital calipers 75 mm mm mm mm Left-handed digital caliper 150 mm Digital calipers Resolution: 0.01 mm, with mm/inch conversion. Absolute digital calipers 150 mm 200 mm Digital calipers IP mm 200 mm Calipers Measuring range: mm. Vernier: 0.05 mm ➊, 0.02 mm ➋, or 0.05 mm and 1/128 inch ➌. Calipers mm/inch ➌ Spring release Locking screw Calipers mm Right-handed ➋ Left-handed ➊ Left-handed ➋ Digital calipers Dial calipers Graduation: 0.1 mm ➊, 0.02 mm ➋ or 0.01 mm ➌. 1 pointer revolution = 2 mm ➍ or 1 mm ➎ Digital caliper IP67 ➊ ➌ Digital caliper mm ➋ ➌ Digital solar caliper ➊ Measuring range: mm. Resolution: 0.01 mm ➊ or mm ➋. With mm/inch conversion. Available up to. ➌ Various options for calipers available Depth measuring base, suitable for most calipers with a depth rod and a measuring range up to 200 mm. Protractor to attach to a caliper or height gauge. Measuring range: 180. Depth measuring base Auxiliary protractor 1'/0.01 Various caliper models available With slidable measuring jaw (0-150 mm) With prismatic anvil (1-40 mm) With measuring pins ( mm) TESA and Mitutoyo calipers Plastic dial caliper 150 mm ➊ ➎ Absolute digital ➊ ➍ ➀ 500 mm ➂ 1000 mm ➃ 1500 mm ➃ 2000 mm ➃ Absolute digital ➊ 500 mm ➂ 500 mm ➃ 600 mm ➂ 600 mm ➃ 1000 mm ➃ 1000 mm ➅ 1500 mm ➃ 1500 mm ➅ 2000 mm ➃ 2000 mm ➅ Digital carbon, IP54 ➊ ➍ 1000 mm ➂ 1000 mm ➃ 1500 mm ➂ 1500 mm ➃ 2000 mm ➃ 3000 mm ➄ Dial calipers 150 mm ➋ ➍ 200 mm ➋ ➍ ➋ ➍ 150 mm ➌ ➎ Digital and vernier workshop calipers Resolution: 0.01 mm, with mm/inch conversion. ➊ Vernier: 0.05 mm and 1/128 inch ➋, or 0.02 mm and 1/1000 inch ➌. With measuring knives. ➍ Jaw length: 75 ➀, 100 ➁, 150 ➂, 200 ➃, 250 ➄ or ➅ Vernier workshop calipers ➋ ➍ 400 mm ➁ mm ➂ mm ➂ mm ➂ mm ➂ mm ➃ mm ➃ Vernier workshop calipers ➌ ➍ 400 mm ➁ 500 mm ➂ 600 mm ➂ 750 mm ➂ 1000 mm ➂ 1500 mm ➃ 2000 mm ➃ Vernier workshop calipers ➋ 450 mm ➂ mm ➂ mm ➂ mm ➂ mm ➂ Vernier workshop calipers ➌ 450 mm ➂ 500 mm ➂ 600 mm ➂ 800 mm ➂ 1000 mm ➂

3 Calipers, micrometers Vernier depth calipers ➋ 200 mm ➀ ➀ mm ➀ Vernier depth calipers ➋ ➌ 200 mm ➀ ➀ Digital micrometers mm mm mm mm Sets 0-75 mm ➂ mm ➃ mm ➅ Digital and vernier depth calipers Resolution 0.01 mm (with mm/inch conversion) ➊ or vernier 0.02 mm ➋. With hook. ➌ Base length: 100 mm ➀ or 120 mm ➁ Digital micrometers Digital depth calipers ➊ 150 mm ➀ 200 mm ➀ ➀ 500 mm ➁ ➊ ➊ ➋ ➊ ➊ ➋ Digital micrometers with two displays ➊ ➋ 0-30 mm mm mm mm mm mm mm mm Digital depth calipers ➊ ➌ 200 mm ➀ ➀ mm ➀ Resolution: mm ABS/INC switchable and with mm/inch conversion. ➊ Protection: IP54. ➋ The sets contain ➂, ➃ or ➅ instruments. The micrometers with displays on both sides are suitable for left-handers. The large displays can also show the measuring value upside down Digital and analog depth micrometers Resolution mm (with mm/inch conversion) ➊ or graduation 0.01 mm ➋ With ➀ to ➅ interchangeable, spherical ➌ or flat ➍ rods. Base length: 63 mm ➎ or mm ➏. Available up to Digital micrometers ➊ ➌ ➎ Analog ➋ ➌ ➎ Analog ➋ ➍ ➎ 25 mm ➀ mm ➁ mm ➃ mm ➅ Digital micrometers ➊ ➌ ➏ Analog ➋ ➌ ➏ Analog ➋ ➍ ➏ 25 mm ➀ 50 mm ➁ 100 mm ➃ 150 mm ➅ Micrometers ➊ ➍ Micrometers ➊ ➎ mm mm mm mm mm mm mm Sets ➊ ➍/➎ 0-75 mm ➂ mm ➃ mm ➅ ➅ Micrometers Graduation: 0.01 mm. Measuring span: 25 mm ➊, 100 mm (travel 25 mm, spacers 25 and 50 mm) ➋ or 200 mm (travel 50 mm, spacers 50 and 100 mm) ➌. Varnished cast iron ➍, steel plate ➎ or tubular ➏ frame, with insulating grips. The sets contain ➂ to instruments Large measuring span ➋ ➏ mm mm mm mm mm mm mm Large measuring span ➌ ➏ mm mm mm mm mm Fast adjustable micrometers Fast adjustable micrometers Graduation: 0.01 mm. 1 revolution of the thimble = 1 mm. Thimble with 100 step graduation. (continued) mm mm mm mm TESA and Mitutoyo micrometers

4 Digital micrometers ➊ mm mm mm mm Digital micrometers ➊ ➂ 1-15 mm 5-20 mm mm mm mm mm mm / Digital and analog micrometers for gear pitch and thickness Without friction thimble ➌ 6.5 mm ➊ ➎ ➐ 6.5 mm ➊ ➏ ➐ mm ➊ ➎ ➑ Resolution mm (with mm/inch conversion) ➊ or graduation 0.01 mm ➋. Analog micrometers ➋ mm mm mm mm Analog micrometers ➋ ➂ 1-15 mm 5-20 mm mm mm mm mm mm Analog micrometers ➋ ➄ 5-25 mm mm mm mm mm Micrometer heads Graduation: 0.01 mm ➊ or mm ➋. Steel ➌ or tungsten carbide ➍ measuring face. Flat ➎ or spherical ➏ spindle; ø 3.5 mm ➐, ø 5 mm ➑ or ø 6.5 mm ➒. Digital models are also available With friction thimble ➍ 25 mm ➊ ➎ ➒ 25 mm ➋ ➎ ➒ Digital and analog micrometers with prism-shaped anvil For measuring the diameters of objects with an odd number of flutes such as taps, reamers and mills. Resolution mm (with mm/inch conversion) ➊ or graduation 0.01 mm ➋. For ➂- or ➄-fluted objects (angle 60 or 108 ). Instruments for 7-fluted objects (angle 128 ) are also available. Incl. setting standard Tolerance micrometer with precision dial indicator Measuring range:. Vernier of the thimble: mm. Dial indicator: range ± 0.04 mm, graduation mm. Tolerance micrometer Digital micrometers ➊ Digital micrometers ➊ mm mm mm mm Digital and analog micrometers with lamellar measuring faces Measuring force indicator for micrometers with measuring range. Available for measuring ranges up to 100 mm. Micrometers Resolution mm (with mm/inch conversion) ➊ or graduation 0.01 mm ➋. Measuring faces: thickness 0.75 mm, length 6.5 mm. Analog micrometers ➋ Digital and analog screw thread micrometers Resolution mm (with mm/inch conversion) ➊ or graduation 0.01 mm ➋. Incl. setting gauge 60 (setting gauge 55 optionally available). Inserts are not included. The inserts have a 55 ➌ or 60 ➍ flank angle. Delivery in a set of ➅ or ➉ pairs covering the whole range. Separate pairs are also available Analog micrometers ➋ mm mm mm mm Insert sets For metric threads with pitch mm ➍ ➅ For Whitworth threads, threads/inch ➌ ➉ For UN/UNC/UNF threads, threads/inch ➍ ➅ Various options for micrometers available Micrometer stand with clamping range Setting gauge for micrometers. With plastic insulating grip. Available up to 975 mm. Measuring force indicator 5-12 N Micrometer stand Pair of inserts with measuring wires ø 1.10 mm Setting gauge 25 mm Pair of inserts with thread measuring wires ø 1.10 mm, for micrometers with measuring faces ø 6.5 mm. Available with wire diameters mm and for measuring faces ø 6.35 mm, ø 6.5 mm, ø 6.8 mm, ø 7.5 mm and ø 8 mm; in pairs or as a complete set

5 Internal and external measuring instruments Digital three-point internal micrometers IP54 Internal micrometers with a small ➊ or large ➋ measuring range, for measuring internal dimensions like diameters of (blind) bores Digital internal micrometers ➊ ø 6-8 mm ø 8-10 mm ø mm ø mm ø mm ø 2 ø mm ø mm ø mm ø mm ø mm ø mm ø mm ø mm ➌ ø mm ➌ ø mm ➌ ø mm ➌ ø mm ➌ ø mm ➌ Resolution: mm, with mm/inch conversion. Interchangeable measuring bolts. ➌ The sets contain ➁, ➂ or ➃ instruments. (continued) ø mm ➌ ø ➌ Sets ➊ ø 6-12 mm ➂ ø 12 - ø mm ➁ 50 mm ➃ ø mm ➃ Digital internal micrometers ➋ ø mm ø mm ø mm ø mm ø Sets ➋ ø mm ➁ ø mm ➁ Digital int. micrometers ➋ ➌ ø mm ø mm Three-point internal micrometers Graduation: mm ➊ or mm ➋. Setting ring not included with separate instruments. The sets contain ➁ to ➅ instruments, setting rings, and from ø 6 mm an extension of 100 mm ➌ or 150 mm ➍. Internal micrometers ➊ ø mm ø mm ø mm ø mm ø 6-8 mm ø 8-10 mm ø mm Internal micrometers ➋ ø mm ø mm ø 2 ø mm ø mm ø mm ø mm Sets ø mm ➃ ➊ ø 6-12 mm ➂ ➊ ➌ ø mm ➁ ➋ ➍ ø mm ➃ ➋ ➍ ø mm ➅ ➋ ➍ (continued) ø mm ø mm ø mm ø mm ø mm ø mm ø mm ø mm ø mm ø mm ø mm ø mm ø Extensions Extension 100 mm, for instruments ø 6-12 mm Extension 150 mm, for instruments ø mm Extension 150 mm, for instruments ø mm Extension 150 mm, for instruments ø mm Bore gauges Interchangeable inserts. Clamping shaft: ø 8 mm. Incl. standard analog dial indicator 0-3 mm (graduation 0.01 mm). ø 6-8 mm Bore gauges (continued) ø 8-10 mm mm mm ø mm mm mm ø mm mm ø mm mm ø Sets mm ø mm ø 6-12 mm Optional dial indicators for bore gauges Analog, 10 mm (graduation 0.01 mm) Digital, 12.5 mm (resolution mm) Bore gauge setting instrument For accurate zero-setting of internal measuring instruments with the help of gauge blocks Adjustment range: mm. Excl. gauge blocks. Bore gauge setting instrument Schwenk dial indicators and internal measuring instruments German quality ø mm ø mm ø mm ø mm ø mm ø mm Pistol-shaped three-point internal micrometers Clamping shaft: ø 8 mm. Excl. dial indicator. Internal micrometers ø mm ø mm ø mm TESA and Mitutoyo three point internal micrometers Dial indicators for pistol-shaped internal micrometers Analog, 10 mm (graduation 0.01 mm) Digital, 12.5 mm (resolution mm)

6 Digital and analog internal measuring instruments Resolution 0.01 mm (with mm/inch conversion, and digital-analog and digital readout) ➊ or graduation 0.01 mm ➋. Span: 10 mm ➌ or 20 mm ➍. Contact form: cylindrical with radius 0.3 mm ➀ or 0.5 mm ➁, or with a tungsten carbide ball ø 1.5 mm ➂. Digital meas. instruments ➊ ➌ 5-15 mm ➀ mm ➀ mm ➁ mm ➁ mm ➁ mm ➂ mm ➂ mm ➂ mm ➂ Digital meas. instruments ➊ ➍ 5-25 mm ➀ mm ➁ mm ➁ mm ➁ mm ➁ mm ➂ mm ➂ mm ➂ mm ➂ Digital meas. instruments ➊ ➌ 0-10 mm ➀ mm ➀ mm ➀ mm ➀ mm ➀ mm ➂ mm ➂ mm ➂ mm ➂ mm ➂ Digital meas. instruments ➊ ➍ 0-20 mm ➁ mm ➁ mm ➁ mm ➁ mm ➁ 0-20 mm ➂ mm ➂ mm ➂ mm ➂ mm ➂ Analog meas. instruments ➋ ➌ 5-15 mm ➀ mm ➀ mm ➁ mm ➁ mm ➁ mm ➂ mm ➂ mm ➂ mm ➂ Analog meas. instruments ➋ ➍ 5-25 mm ➀ mm ➁ mm ➁ mm ➁ mm ➁ mm ➂ mm ➂ mm ➂ mm ➂ Digital and analog external measuring instruments Resolution 0.01 mm (with mm/inch conversion, and digital-analog and digital readout) ➊ or graduation 0.01 mm ➋. Span: 10 mm ➌ or 20 mm ➍. Contact form: cylindrical with radius 0.5 mm ➀ or 0.75 mm ➁, or with a tungsten carbide ball ø 1.5 mm ➂ Analog meas. instruments ➋ ➌ 0-10 mm ➀ mm ➀ mm ➀ mm ➀ mm ➀ mm ➂ mm ➂ mm ➂ mm ➂ mm ➂ Analog meas. instruments ➋ ➍ 0-20 mm ➁ mm ➁ mm ➁ mm ➁ mm ➁ mm ➂ mm ➂ mm ➂ mm ➂ mm ➂ Krœplin internal and external measuring instruments German quality. Various models available. Internal and external measuring instruments Digital and analog internal micrometers Resolution mm (with mm/inch conversion) ➊ or graduation 0.01 mm ➋. With special measuring jaws for measurements in hard to reach places. ➌ Digital internal micrometers ➊ 5-30 mm ➌ ➌ ➌ mm ➌ mm ➌ mm ➌ mm ➌ Stick micrometers mm mm mm mm ➊ mm ➊ mm ➊ mm ➊ ➊ mm ➊ Thickness gauge ➊ 10 mm ➁ Thickness gauges ➋ 30 mm ➀ 30 mm ➁ 30 mm ➃ 30 mm ➅ Thickness gauges ➋ ➍ 50 mm ➀ 50 mm ➁ Stick micrometer sets ➋ ➎ mm mm ➁ mm ➂ 50 - ➄ mm ➅ mm ➇ mm ➉ ➌ Analog internal micrometers ➋ 5-30 mm ➌ ➌ ➌ mm ➌ mm ➌ mm ➌ mm ➌ Stick micrometers Graduation: 0.01 mm. With insulating grips. ➊ The sets consist of a case with a micrometer (measuring range mm ➋, mm ➌ or mm ➍) and up to ➉ extensions. Incl. setting gauge. ➎ Models with interchangeable inserts for several kinds of internal thread are also available. (continued) mm ➊ mm ➊ mm ➊ mm ➊ mm ➊ mm ➊ mm ➊ mm ➊ mm ➊ mm ➊ mm ➊ Stick micrometer set ➊ ➌ ➎ mm ➈ Stick micrometer sets ➊ ➍ mm mm ➄ mm ➅ mm ➆ mm ➇ Wolf thickness gauges Graduation: 0.1 mm. Throat depth: 15 mm ➊, 50 mm ➋ or 150 mm ➌. (300 and 500 mm also available.) With grip. ➍ Contact form: flat ø 3.5 mm ➀, 10 mm ➁, 16 mm ➂ or 25 mm ➃ for different types of soft materials, cone-shaped with 1.5 mm radius tip ➄ for metals, or spherical with 6 mm radius ➅ for general applications. (continued) 50 mm ➂ 50 mm ➃ 50 mm ➄ 50 mm ➅ Thickness gauges ➌ 25 mm ➁ 25 mm ➂ 25 mm ➃ 30 mm ➅

7 Dial indicators and probes Digital dial indicators ➊ 12.5 mm mm Digital dial indicator ➋ 50 mm mm Dial indicators ➊ 3 mm ➁ 5 mm ➁ 10 mm ➁ Dial indicators ➊ ➌ 3 mm ➂ 5 mm ➂ 10 mm ➂ Dial indicators ➋ ➌ 1 mm ➂ 2 mm ➂ 3 mm ➂ 5 mm ➂ Dial indicators ➊ ➌ 3 mm ➂ 4 mm ➀ 5 mm ➃ 10 mm ➃ 10 mm ➃ ➎ 20 mm ➄ ➎ 30 mm ➅ ➎ Dial test indicators 0.5 mm ➊ ➁ 1 mm ➊ ➁ Digital dial indicators Resolution: 0.01 mm ➊ or mm ➋. With mm/inch conversion. Clamping stem: ø 8 mm. Adjustable tolerance limits. Shockproof dial indicators Graduation: 0.01 mm ➊ or mm ➋. Clamping stem: ø 8 mm. Rotatable dial ø 40 mm ➀, ø 55 mm ➁, ø 60 mm ➂ or ø 76 mm ➃. Adjustable tolerance markers With locking screw. ➌ Back with lug. ➍ Protection: IP54. ➎ Waterproof dial ind. ➊ ➌ ➍ ➎ 3 mm ➁ mm ➁ mm ➁ Miniature dial indicators ➌ 3 mm ➊ ➀ 5 mm ➊ ➀ 8 mm ➊ ➀ 1 mm ➋ ➀ Dial indicators ➊ ➌ 25 mm ➂ 30 mm ➂ 50 mm ➃ Peacock dial indicators Graduation: 0.01 mm ➊ or mm ➋. Clamping stem: ø 8 mm ➌ or ø 10 mm ➍. Rotatable dial ø 36 mm ➀, ø 38 mm ➁, ø 40 mm ➂, ø 53 mm ➃, ø 66.5 mm ➄, ø 76 mm ➅ or ø 83 mm ➆ Back with lug. ➎ Dial indicator ➊ ➍ 50 mm ➆ ➎ Dial indicators ➋ ➌ 1 mm ➃ 2 mm ➄ ➎ 5 mm ➄ ➎ With back plunger ➊ ➌ 5 mm ➁ Peacock dial test indicators Graduation: 0.01 mm ➊, mm ➋ or mm ➌. With dovetail joint and clamping stem ø 6 mm Rotatable dial ø 30 mm ➀ or ø 35 mm ➁. (continued) 0.28 mm ➋ ➁ 0.14 mm ➌ ➀ Precision dial indicator Measuring range: 0.1 mm, travel: 3 mm. Graduation: mm Clamping stem: ø 8 mm. Fine adjustment and adjustable tolerance markers. Precision dial indicator Dial test indicators Graduation: 0.01 mm ➊ or mm ➋. With dovetail joint and clamping stems ø 6 mm and ø 8 mm. Rotatable dial ø 40 mm. Dial test indicator 0.8 mm ➊ Dial test indicator 0.2 mm ➋ Electronic probe Digital read-out unit Depth measuring base 63 x 17 mm Depth measuring base x 17 mm Clamping bush VKE Clamping screw VKD Clamp collar with dovetail Various options for dial indicators available Various inserts with thread M2.5, with a steel, tungsten carbide, ruby or sapphire contact point. d Steel extensions for inserts with thread M2.5. Length: mm. Depth measuring bases with clamping shaft H Electronic probe and read-out unit With digital as well as digital-analog indication of the measured value. Measuring range: ± 2 mm. Resolution: 0.1 µm. Adjustable tolerance limits. MF measuring fixture system Universal construction system, made for quickly and easily building custom measuring fixtures Clamping bush and screw. Clamp collar with dovetail and clamping shafts ø 5.6 mm and ø 9.5 mm Käfer dial indicators and dial test indicators German quality. TESA and Mitutoyo digital and analog dial indicators

8 Dial indicator stands and V blocks Measuring stands Clamping shaft: ø 8 mm ➊ or ø 20 mm ➋. Measuring height: 135 mm ➌, 150 mm ➍ or 290 mm ➎. Aluminum ceramic grooved measuring table: 80 x 80 mm, flatness: ± 1 µm. ➏ Granite measuring table: 150 x 100 x 40 mm ➐ or 400 x 400 x 70 mm ➑. Measuring stand with ceramic table ➊ ➌ ➏ Aluminum ceramic measuring table 80 x 80 mm ➏ Measuring stand with granite table ➊ ➍ ➐ Measuring stand with granite table ➋ ➎ ➑ Reducing bush ø 20 / 8 mm Measuring stand with T groove Clamping shaft: ø 8 mm. Column: ø 14 x 200 mm. Transverse arm with fine adjustment: ø 12 x 270 mm. Ground base with T groove: 225 x 57 x 40 mm. Measuring stand with T groove Dial indicator stands With fine adjustment. ➊ Clamping shaft ø 6 mm ➋ or ø 8 mm ➌ for dial indicators and probes. Dovetail joint ➍ for dial test indicators. Measuring arm with mechanical ➎ or hydraulic ➏ central clamping device. On/off switchable magnetic base, flat ➐ or with V groove ➑, flexform base with locking mechanism and permanent magnetic force ➒, or vacuum base ➓. Magnetic force: 170 N ➀, 400 N ➁, 600 N ➂, 800 N ➃ or 1000 N ➄. Various models and bases (also separately) available Measuring stand with flexible arm With dovetail joint, mechanical central clamping device and fine adjustment. Clamping shaft: ø 8 mm. Measuring height: 320 mm. Granite meas. table: 150 x 100 x 40 mm. Stand with flexible arm Measuring stand with spindle adjustment With clear graduation on the spindle and a hand wheel for easy adjustment of the height setting. Clamping shaft: ø 8 mm. Measuring height: 160 mm. Granite measuring table: 260 x 150 x 50 mm. Stand with spindle adjustment FISSO dial indicator stands Various models available. Bases: magnetic (fixed, switch and with flexible shape), vacuum, granite base. Kanetec dial indicator stands Solid dial indicator stands with on/off switch to (de-)activate the magnetic base Stand with column ➐ ➋ ➀ Stand with column ➑ ➊ ➌ ➂ ➊ ➌ ➃ ➊ ➌ ➄ ➊ ➌ ➃ Stand with column ➒ ➊ ➌ ➁ Magnetic V blocks Magnetic force: 686 N ➊ or 1178 N ➋. Magnetic V block 70 x 60 x 72 mm ➊ Magnetic V block 101 x 70 x 95 mm ➋ X blocks in pairs ➀ 120 x 100 x 60 mm 150 x 130 x 75 mm 200 x 170 x 90 mm V blocks in pairs ➂ 100 x 40 x 30 mm 150 x 50 x 40 mm 200 x 70 x 50 mm 250 x 85 x 60 mm 300 x 100 x 70 mm X blocks in pairs 120 x 100 x 60 mm 150 x 130 x 75 mm 200 x 170 x 90 mm Cast iron V blocks in pairs V groove: 90. Ground in pairs. Parallelism: class (8 µm), ➀ (16 µm) or ➂ (60 µm). Granite models are also available Stand with flexible arm ➌ ➍ ➑ ➊ ➎ ➂ ➊ ➎ ➃ ➊ ➏ ➂ ➊ ➏ ➃ ➎ ➁ ➊ ➎ ➃ Stand with flexible arm ➌ ➍ ➒ ➊ ➎ ➁ Stand with flexible arm ➌ ➍ ➓ ➊ ➎ Cast iron X blocks in pairs V grooves: 90. Ground in pairs. Parallelism: class (8 µm) or ➀ (16 µm) ➀

9 Squares, surface plates, spirit levels, protractors Adjustable V-blocks Adjustable: Adjustable V-blocks 75 x 25 x 32.5 mm 102 x 30 x 48 mm 102 x 46 x 48 mm Various squares and straight edges available Granite squares Inspection spirit levels Square model, grade 0 Grade x 200 x 35 mm Graduation main vial: 250 x 250 x 40 mm mm/m. 315 x 315 x 40 mm Main vial adjustable. ➊ 400 x 400 x 45 mm With cross test vial. 500 x 500 x 60 mm Base with V-groove. Triangular model, DIN 875/0 DIN 875/00 Inspection spirit levels with base 160 x 42 mm 100 x 63 x 16 mm 160 x 100 x 25 mm 250 x 160 x 35 mm 400 x 250 x 50 mm 630 x 400 x 70 mm 1000 x 630 x 100 mm Granite surface plate stands 630 x 630 x 80 mm 800 x 500 x 100 mm 900 x 600 x 100 mm 1000 x 630 x 100 mm 1000 x 630 x 150 mm 1000 x 1000 x 100 mm 1000 x 1000 x 150 mm 1200 x 800 x 120 mm 1200 x 800 x 150 mm 1500 x 1000 x 150 mm 1500 x 1000 x 200 mm 2000 x 1000 x 200 mm 2000 x 1000 x 250 mm Granite surface plates DIN 876/1 DIN 876/0 DIN 876/ x 250 x 50 mm x 250 x 50 mm x 400 x 70 mm x 400 x 70 mm x 630 x 80 mm x 500 x 100 mm x 600 x 100 mm x 630 x 100 mm x 630 x 150 mm x 1000 x 100 mm x 1000 x 150 mm x 800 x 120 mm x 800 x 150 mm x 1000 x 150 mm x 1000 x 200 mm x 1000 x 200 mm x 1000 x 250 mm x 1500 x Granite surface plates and surface plate stands Standard working height of the stands: 900 mm. Cast iron surface plates are also available, in many sizes, with accuracy conforming to DIN 876/0, 1 and 3. Surface plate accessories Cleaner 0.4 kg Support set Support mm/m 0.1 mm/m 0.04 mm/m 0.02 mm/m 0.01 mm/m With base 250 x 42 mm 0.3 mm/m 0.1 mm/m 0.04 mm/m 0.02 mm/m 0.01 mm/m With base 150 x 40 mm ➊ 0.5 mm/m 0.1 mm/m 0.05 mm/m 0.02 mm/m Digital protractor/spirit level ➊ Digital protractor/spirit level ➋ x 42 mm x 42 mm 500 x 44 mm x 40 mm ➊ 300 x 40 mm ➊ Various spirit levels available Universal digital bevel protractor Resolution: and 30". Measuring range: -360 to Incl. blades 150, 200,. Displays both decimal degrees and degreesminutes-seconds at the same time. Digital bevel protractor Bevel protractor with magnifier Vernier: 5', parallax-free. Measuring range: 4 x 90. Incl. blade Bevel protractor with magnifier Digital protractors/spirit levels With magnetic base. ➊ All four sides are measuring faces. ➋ Compact digital angle sensor Resolution: 0.01 or 1'. Measuring range: -360 to Digimatic data output. Digital angle sensor

10 Roughness testers, gauge blocks, gauges Roughness specimens Composite set: flat lapping, reaming, grinding, end milling, horizontal milling, turning. Ra values, standardized N values and Rz values are specified. Various roughness specimens for different machining methods available. Set of 30 roughness specimens (English) Set of 30 roughness specimens (German) TESA Rugosurf and Mitutoyo Surftest surface roughness testers Sets of feeler gauges Measuring range: mm (8 blades) ➀, mm (13 blades) ➁, or mm (20 blades) ➂. Different blade lengths. Material: steel ➊, stainless steel ➋ or brass ➌ Feeler gauges, 8 blades ➀ 13 blades ➁ 20 blades ➂ 100 mm ➋ mm ➌ mm ➊ ➊ mm ➊ mm ➊ Gauge block sets Steel ➊, tungsten carbide ➋ or ceramic ➌ gauge blocks. Conforming to ISO 3650 in classes, ➀ or ➁. Gauge blocks also separately available. Gauge block sets ➊ ➋ M32 ➁ M32 ➀ M M47 ➁ M47 ➀ M M87 ➁ M87 ➀ M M88 ➁ M88 ➀ M M112 ➁ M112 ➀ M Gauge block sets ➌ M32 ➀ M32 M47 ➀ M47 M87 ➀ M87 M103 ➀ M103 M112 ➀ M Gauge block accessories For combining several gauge blocks for outside or inside dimensions. This also enables the creation of setting gauges and marking tools. Gauge block accessories set M8 Gauge block accessories set M10 Gauge block accessories set M12 Long steel gauge blocks Set consisting of: 125, 150, 175, 200, 250, 300, and 500 mm ➊, or 600, 700, 800, 900 and 1000 mm ➋. Separate gauge blocks are also available. Steel gauge blocks ISO 3650/2 ISO 3650/1 ISO 3650/0 Set ➊ Set ➋ Toggle clamp for long gauge blocks Martin+Tschopp pin gauges Hardened steel ➊ or ceramic pin gauges. Various accuracy classes. Diameter range: mm. Pin gauge set 1-10 mm (inc. 0.1 mm; 91 pieces) ➊ LMW thread gauges Thread plug gauges (Go + NoGo) and thread ring gauges (Go or NoGo). Various kinds of thread gauges available on request. For metric screw thread (ISO 1502) Thread plug M4-6H Thread ring Go M4-6g For non-sealing fixing pipe thread (DIN ISO 228) Thread plug G 1 / 8 " Thread ring Go G 1 / 8 " For sealing pipe thread (DIN 2999) Thread plug Rp 1 / 2 " Thread ring R 1 / 2 " For American screw thread UNC and UNF (ANSI B 1.1) Thread plug 1 / 4-20 UNC Thread ring Go 1 / 4-20 UNC LMW setting rings Conforming to DIN 2250 form C. The size is indicated on the ring to three decimal places. Available from 1 to 315 mm. Various intermediate and larger sizes are available on request. Setting ring 50 mm Thread table Table with all standard international thread indications: metric, Ww, Gas, BSF, Pg, BA, UNC, UNF and UNEF. Tolerance table Table with all tolerances and fits conforming to ISO R , up to 500 mm. Conversion table mm/inch For converting mm to inch and inch to mm. Thread table Tolerance table Conversion table mm/inch

11 Magnifiers and microscopes Stand magnifiers 5x 10x 15x 22x Scale magnifiers 7x ➋ 10x ➌ 15x ➊ Scale magnifier sets 7x ➋ 10x ➌ Standard glass rulers ➊ 50 mm 100 mm 200 mm Peak stand magnifiers and light magnifiers x 15x 7x ➋ 10x ➌ 15x ➊ Light magnifiers Peak scale magnifiers Measuring range standard scale: 14 mm ➊, 20 mm ➋ or 30 mm ➌. Graduation standard scale: 0.1 mm. The sets contain one scale magnifier and the five most frequently used scales. Various scales available on request With illumination Peak magnifying glasses Magnification small lens: 5x. ➊ Magnifying glass 2.5x ➊ Flexible stand magnifier 2.2x Peak standard and special glass rulers Graduation: 0.1 mm. Accuracy: ± 0.02 mm. Incl. 1 hand magnifier 15x ➊ or 2 magnifiers 10x ➋. Special glass rulers ➋ 500 mm 700 mm 1000 mm Al, clear ➀ 9x, 10 x 10 mm 7x, 15 x 15 mm 6x, 25 x 25 mm Al, black ➀ 9x, 10 x 10 mm 7x, 15 x 15 mm 6x, 25 x 25 mm Pen microscopes 25x 50x 75x 100x 25x, L = 3.0 mm ➊ 50x, L = 1.6 mm ➋ 75x, L = 1.0 mm ➌ 100x, L = 0.8 mm ➍ Peak zoom and telecentric magnifiers Graduation: 0.1 mm Zoom magnifiers 8-16x Telecentric magnifier 10-20x x Peak folding magnifiers Graduation: 1 mm. With ➀ or ➁ lenses Al, black ➁ 4x, 30 x 30 mm 3x, 50 x 50 mm Zn, black ➁ 9x, 10 x 10 mm 8x, 15 x 15 mm 6x, 25 x 25 mm Peak pen microscopes Peak head magnifiers Head magnifier 2.2x / 3.3x Head magnifier 2.2x / 3.3x / 4.1x / 5.2x 25x 50x Peak stand microscopes Graduation: 0.05 mm ➊, 0.02 mm ➋, 0.01 mm ➌ or mm ➍. Various magnifications, measuring ranges, and scales available. EIM (with erect image) and CIL (with coaxial lightsource) models are also available Stand microscopes (continued) 20x, L = 6.0 mm ➊ 40x, L = 3.4 mm ➋ 60x, L = 1.6 mm ➋ 100x, L = 1.2 mm ➌ With a fixed scale Video measuring microscopes USB Magnification: x, stepless. Resolution: 640 x 480 px ➊ or 1.3 Mpx ➋. With calibration function. ➌ Illumination: 8 LED white ring light. Measuring of distances, radii and angles. With software (English) for Windows 2000/XP/Vista. Aluminum casing. ➍ Microscope 313T ➊ Microscope 413T 1.3 Mpx ➋ ➌ Microscope 413M 1.3 Mpx ➋ ➌ ➍ Stand with holder Reducing coupling ø 10 / 8 mm * ➎ Measuring microscope holder * ➎ ➎ * For mounting on a dial indicator stand (only possible in combination with each other) Video microscopes Optical magnification: 5x ➊, 12x ➋, 24x ➌, or 7-27x with optical zoom ➍. Digital zoom: up to 4x. Camera resolution: 640 x 480 px. LCD display: 1.8", with scale. Illumination: 3 LEDs. With memory card and USB output. ➎ Microscope 7-108x ➍ ➎ Microscope 5-20x ➊ Microscope 12-48x ➋ Microscope 24-90x ➌ Stand with holder

12 Stereo microscopes SSM stereo microscopes All models are supplied with eyepieces 10x. Models with illumination: switchable incident light or Diopter adjustment: ± 5 dp. backlight ➍, or incident light and backlight can also be Auxiliary lenses 0.5x, 0.75x, 1.5x and 2x optionally available. ➊ switched on at the same time. ➎ Stand with column ➋ or fixed stand ➌. Luminous intensity adjustable. ➏ Stereo zoom microscopes SSM 3/5/10/20 Supplied with double objective 2x/4x ➀, 1x/2x ➁ or 1x/3x ➂. Eyepieces 5x, 15x and 20x optionally available. Stereo microscopes with stepless zoom SSM E Magnification from 10x to 40x smoothly adjustable with standard eyepieces 10x. (Eyepieces 20x optionally available.) Camera connection. ➃ Stereo microscopes 20x/40x ➀ 10x/20x ➁ 10x/30x ➂ Pairs of eyepieces for SSM 3/5/10/20 SSM-3A ➋ x SSM-3C ➋ ➍ x SSM-5AW ➌ x SSM-5CW ➌ ➍ x SSM-10 ➊ ➋ Pairs of eyepieces for SSM E SSM-20C2 ➊ ➋ ➍ ➏ x SSM-20W ➊ ➌ ➎ x Stereo microscopes 10-40x ➊ SSM-EW ➌ ➎ SSM-EC2 ➋ ➍ ➏ Separate parts SSM-E microscope head ➊ SSM-E microscope head ➊ ➃ Large stand ➋ Stereo microscopes 10-40x ➊ ➃ SSM-3E ➋ ➎ SSM-3EC2 ➋ ➍ ➏ XY measuring table Range X, Y: 25 mm. Intake microscope: ø 94 mm. Intake micrometer head: ø 12 mm. Turnable object plate with degree indication. Excl. micrometer heads Dial indicator holder Suitable for the stereo microscopes with round column from the SSM 10/20/E series, for height measurements Field of view qualifier Accuracy: ± mm. Darkfield condenser Suitable for all SSM stereo microscopes with backlight. Diameter: 94 mm. Stage: ø 27 mm. Dial indicator holder Darkfield condenser Field of view qualifier XY measuring table USB microscope cameras ➊ ➋ ➌ ➏ 1.3 Mpx ➊ ➍ ➎ ➐ 1.3 Mpx ➋ ➍ ➎ ➐ Auxiliary lenses for SSM 10/20/E * 0.5x x x x USB microscope cameras For use in the ocular (ø 30 mm) of an SSM microscope ➊, or in the adapter bushing (ø 23 mm) of the SSM 3E ( ) ➋. Resolution: 640 x 480 px ➌ or 1.3 Mpx ➍ Measuring of distances, radii and angles. ➎ With software (English) for Windows 2000/XP ➏ or 2000/XP/Vista ➐. ➎ Fluorescent illumination Suitable for all SSM 3/5/10/20/E stereo microscopes. Fluorescent illumination Circular fluorescent tube 10W LED illumination (intensity adjustable) Ring light 60 LEDs ➊ Ring light 80 LEDs ➊ Halogen optical fiber illumination Light source (intensity adjustable) Single flexible arm Dual flexible arm Optical fiber ring light ➊ * Fixed stand: lens 0.5x not suitable; with lenses 1.5x and 2x focusing on the stage plate is not possible and the product needs to be positioned higher LED illumination and halogen optical fiber illumination The ring lights are only suitable for the SSM 10/20/E stereo microscopes. ➊

13 Endoscopes, machine tools Endoscopes For inspecting difficult to reach places by means of a flexible cable. Equipped with built-in illumination. Cable length: 40 cm ➊ or 100 cm ➋. (Models with 80 cm ➊ or 200 cm ➋ cable are available on request.) Field of view: 40 ➌ or 67 ➍. Illumination: Xenon halogen ➎ or LED ➏. Viewing distance: 2-10 cm ➐ or cm ➑. Mirrors 35 and 60 are also available. Delivery in an aluminum case. Endoscopes GSI USB endoscope GSIV Resolution: 7400 px. Camera resolution: 1.3 Mpx. Soft flexible cable ø 4 mm ➀, Rigid bendable cable ø 9 mm. or rigid bendable cable With software (English) for ø 8 mm ➁. Windows 2000/XP. Portable monitoring endoscope GSIM Resolution: 640 x 480 px (JPEG pictures), 320 x 240 px (ASF video). Resolution 3.5" TFT LCD display: 320 x 240 px. Soft flexible cable ø 5.5 mm. Memory card: SD 512 MB. Control panel: English, for taking and saving pictures (JPEG) and video (ASF) Endoscopes GSI 4 ➊ ➌ ➎ ➀ GSI 8 ➊ ➌ ➎ ➁ GSIV ➊ ➍ ➏ ➐ GSIM ➋ ➍ ➏ ➑ Magnets For GSI 8 For GSIV 0-10% Brix ➊ 0-32% Brix ➋ Mirrors 45 For GSI 4 For GSI 8 For GSIV For GSIM Refractometers Sets of steel parallel blocks Parallel blocks, ground in pairs on the two measuring faces. Parallelism: ± mm. Size deviation: ± 0.01 mm. Length: 150 mm. Width: 8 mm ➀, 10 mm ➁, 12 mm ➂ or 14 mm ➃ Height in mm: ➁ ➊, ➁ ➋, or ➀ , ➁ , ➂ and ➃ ➌. Set of 12 pairs ➊ Set of 14 pairs ➊+➋ Set of 24 pairs ➌ Refractometers for regularly checking the correct mixing ratio of coolants. Graduation: 0.1% ➊ or 0.2% ➋. Accuracy: ± 0.2% Magnification: 3x. Lens: ø 120 mm. Light magnifier with table clamp Light magnifier with base Centering device Scale read-out per rotation: 0-3 mm. Maximum range of use:. 3 straight and 3 bended probes included. Centering device 0.01 mm Edge finders 176 mm ➊ 176 mm ➋ 98 mm ➊ 98 mm ➋ 3D probe for centering Light magnifiers with circular fluorescent lamp Detection range: radial: ± 1 mm, axial: ± 0.3 mm. Radial graduation: for detection range ± 0.1 mm: 0.01 mm, for detection range mm: 0.05 mm. Axial graduation: for detection range ± 0.1 mm: 0.01 mm, for detection range mm: 0.05 mm. Accuracy: 0.01 mm. Clamping stem: ø 20 mm. 3D probe for centering Edge finders ➌ 164 mm ➊ 164 mm ➋ 98 mm ➊ Z-axis setting gauge Repeatability: 0.01 mm. Height: 50 mm (nominal value). Galvanic contact principle with LED indication. Z-axis setting gauge with magnetic base Diebold 3D probe for centering and measuring Measuring range: max. 3 mm. Graduation/repeatability: 0.01 mm. Probe length: 12 mm ➊ or 22 mm ➋. Clamping stem: ø 20 mm (also available with stem ø 12 mm and ø 16 mm). 3D probe IP64 Options ➊ Probe ➊ ➋ Probe ➋ Edge finders Resolution/repeatability: mm ➊ or mm ➋. Clamping stem: ø 6 mm ➌, ø 8 mm ➍ or ø 10 mm ➎. Material: steel ➏, steel + TiN ➐ or steel + CrN ➑. Edge finders ➊ ➏ ø 10 mm ➍ ø 10 mm ➎ ø 4 and ø 10 mm ➍ ø 4 and ø 10 mm ➎ ø 6 mm ➌ Edge finders ➋ ➎ ø 10 mm ➐ ø 4 and ø 10 mm ➐ ø 10 mm ➑ ø 4 and ø 10 mm ➑ Edge finders With steel ball probe ø 10 mm. Clamping stem: ø 20 mm ➊ or ø 32 mm ➋. Galvanic contact principle with LED indication. With sound signal. ➌

14 Rulers, tapes, height gauges, interfaces Digital horizontal and vertical scale units Resolution: 0.01 mm mm/inch conversion. Vertical scale units 100 mm 150 mm 200 mm 450 mm 500 mm 600 mm 800 mm 1000 mm Horizontal scale units 100 mm 150 mm 200 mm 450 mm 500 mm 600 mm 800 mm 1000 mm Graduated rulers and marking gauges Available in steel, chrome finished steel, stainless steel and aluminum. Various models and graduations are possible, for example in right to left. Various options for height and scribing gauges available For auxiliary protractor see the page Calipers. Schwenk circumference tapes Vernier: 0.1 mm ➊ or 0.05 mm ➋. Steel ➌ or stainless steel ➍. For diameters ➋ ➍ ø mm ø mm ø mm Digital measuring tape 5 m For diameters and circumferences ➊ ➌ ø 20 -, mm ø mm, mm ø mm, mm ø mm, mm ø mm, mm ø , mm ø mm, mm ø mm, mm ø mm, mm Digital and analog measuring tapes Resolution/graduation: 1 mm ➊ ➍ Analog meas. tapes, rubberized 2 m m m m Leica DISTO laser distance meters Swiss technology Digital height gauges ➊ ➌ 200 mm mm mm mm Digital, double columns ➊ 450 mm 600 mm TESA and Mitutoyo height gauges Height and scribing gauges Resolution 0.01 mm (with mm/inch conversion) ➊ or vernier 0.02 mm ➋. Fine adjustment. ➌ Insert shaft: 9 x 9 mm Analog height gauges ➋ ➌ 200 mm mm mm Remote Instrument Display Easy to use 2-channel display unit for easy read-out of your digital measuring instruments with Go/NoGo indication. Input for two measuring instruments. Input signal: RS232C and Digimatic. RS232C data output. User defined tolerance limits. Well readable tolerance bars. Footswitch optionally available Smartbox Simple 1-channel interface for connecting instruments to your PC. Input signal: RS232C and Mitutoyo Digimatic. Plug&play connection; no drivers. Connect to PS/2 port, or with optional adapter to USB port. Footswitch optionally available Remote Instrument Display Smartbox PS/2-USB adapter

15 Temperature, hardness, thickness, rotation, force Infrared thermometers Extremely suitable for fast non-contact temperature measurements. Equipped with laser for easy aiming. Resolution: 0.1 C ➊ or 1 C ➋. Optics ratio (distance : spot size): 6 : 1 ➌ or 10 : 1 ➍. Digital dynamometers 5 N 10 N 50 N 200 N 500 N Analog dynamometers 10 N N N N Digital coating thickness gauges Measurements of coating thickness of paint, coating, foil etc. (non-magnetic layers) on a magnetic (ferro) and/or non-magnetic (non ferro) substrate. Measuring range: µm. Resolution: 0.1 µm (< 100 µm), 1 µm ( 100 µm). Accuracy: ± 3%H or 3 µm RS232C data output. Delivery incl. reference standards set. One-button model, specifically designed for the automobile industry. ➊ With integrated sensor Ferro Non-ferro Non-ferro / ferro Non-ferro / ferro ➊ Thermometer -55 to 250 C ➊ ➌ Thermometer -18 to 425 C ➋ ➍ Dynamometers Measures push and pull. With external sensor Ferro Non-ferro Non-ferro / ferro Shore ➊ Shore ➋ Portable Shore A or D hardness testers To measure Shore hardness A ➊ or D ➋. Resolution 0.1 Shore ➌ or graduation 1 Shore ➍. Material thickness: 6 mm. Digital hardness testers ➌ Analog hardness testers ➍ Shore ➊ Shore ➋ Portable digital hardness testers To measure the hardness of surfaces in the most common hardness scales. Measuring ranges: HLD, HB, HRC, HV, HRB, HSD. ➊ Measuring range: HRC. ➋ Digital hardness tester ➊ Digital hardness tester ➋ Digital tachometers laser/contact, contact, laser Measuring range laser: rpm. Measuring range contact: rpm, m/min. Accuracy: ± (0.05% + 1 digit). Digital laser tachometer Measuring range: rpm. Range: cm. Accuracy: ± 0.05%. Digital laser/contact tachometer Digital contact tachometer Digital laser tachometer Digital laser tachometer Digital thickness gauge Digital thickness gauge Measures the thickness of several materials using the ultrasonic measuring principle. Measuring range: mm. Resolution: 0.01 mm (< 100 mm), 0.1 mm ( 100 mm). Accuracy up to 100 mm: ± (0.5%H mm). Portable hardness testers For measuring the hardness of various forms like extrusion profiles, tubes and flat materials. Measuring range: 0-20 Webster. Values can be converted by means of a graph (Rockwell B or E Scale). Material thickness: mm. For aluminum For brass, hard aluminum, soft steel For copper Small model cn cn cn 3-30 cn 5-50 cn cn cn cn Large model cn 1-5 cn 1-10 cn 2-20 cn 3-30 cn 4-40 cn 5-50 cn cn Strain gauges Digital sound level meter Accuracy: ± 1.5 db. Digital sound level meter db

16 precision measuring instruments Exclusive dealer in Ukraine: "Dnepr-Instrument" Ltd 51909, Ukraine, Dneprodzerzhinsk, st. A. Stovby, 4-10 tel / fax: info@dpin.com.ua htpp://