Mark 79/79MX Series. Control Valves Mark 79/79MX Three-Way Control Valves. Three-Way Control Valves. Operation. Features
|
|
|
- Silvester King
- 5 years ago
- Views:
Transcription
1 Mark 79/79MX Series Three-Way Control Valves The Mark 79 is a pneumatic 3-way control valve for use in either bypass or mixing service. The MK79 utilizes the unique sliding gate trim design to provide excellent control with superior longevity. Each valve contains two sets of sliding gate seats connected to a common valve stem for synchronized movement, whether in bypass or mixing mode. Operation The Mark 79 is used for diverting service and is ideal for bypassing fluids around coolers or filters. In this configuration, there is one inlet and two outlets. As one outlet closes, the other outlet opens, diverting flow from one channel to the other in accordance to the air signal to the actuator. The Mark 79MX is used as a combining or mixing valve with two inlets and one outlet. When used as a mixing valve, optimal performance will be achieved with equal pressures on both inlets. Contact factory for further information. Sliding gate seats provide: Straight-through flow for increased seat life, quiet operation and excellent rangeability Short stroke for fast response and accurate control Easily interchangeable Cv s Tight shutoff Features Totally enclosed multi-spring actuator minimizes deadband Multi-spring actuator can be configured to accept a 3-15 psi signal or other control ranges on request. Available with a top-mounted or side mounted positioner Specifications Line s: 1-1/2" (DN40), 2" (DN50), 3" (DN80) End Connections: s 1-1/2" & 2" NPT, BSPT, BSPP, flanged 3" flanged For smaller sized 3-way valves, see our MK709 and MK8000T Series Body Materials: Carbon Steel Stainless Steel Trim Materials: 303SS for Carbon steel bodied valves 316SS for Stainless Steel bodied valves Seat Materials: Jorcote on SST Standard Other materials available Consult factory Control Valves Mark 79/79MX Three-Way Control Valves Jordan Valve, a division of Richards Industries 3170 Wasson Road Cincinnati, OH (f) info@richardsind.com
2 Specifications (Cont'd) Flow Paths Yoke Material: Cast Iron : Steel Stem Packing: Spring loaded Teflon (to 450 F (232 C)) or Braided (above 450 F (232 C)) Service: Steam, oil, gas, air, water, chemicals OPEN) MK79 CLOSED) Seat Interchangeability: 1-1/2" with 2" Body Rating: up to 1000 psig (70 bar) and temperatures up to 550 F (288 C) depending upon specific construction. -20 F (-29 C) temperature limit on all materials; for other temperatures, contact Jordan Valve. OPEN) MK79MX CLOSED) : 1-1/2" & 2" 35M multi-spring, totally enclosed, field-reversible. Maximum actuator pressure: 50 psi (3,4 bar) 3" 85M multi-spring with or without positioner. Positioner: side or top mounted available Shutoff: ANSI Class IV Range: 3-15 psi (0,2-1 bar); others upon request Maximum Allowable Pressure Reductions - Psi (Bar) Model 79 79MX 79SP/TP 79MXSP 79MXTP 35M Seat Material Stainless Steel Telfon Jorcote 40 (2,8) 60 (4,1) 70 (4,8) 55M 1-1/2" - 2" 75 (5,2) 100 (6,9) 125 (8,6) 85M 75 (5,2) 175 (12,1) 200 (13,8) 85M 3" 40 (2,8) 35M 75 (5,2) 125 (8,6) 150 (10,3) 55M 1-1/2" - 2" 75 (5,2) 200 (13,8) 250 (17,2) 85M 75 (5,2) 250 (17,2) 300 (20,7) 55M 120 (8,3) 120 (8,3) 3" 85M 200 (13,8) 200 (13,8) Note: Low flow trim available, consult factory for values. -2-
3 Dimensions Cross-Section D 1/4" NPT B C C1 A A1 Flanged Ends 1-1/2" 2" ANSI Flange Dimensions (inches) A1 B C1 D (lbs.) 35M 150# M 300# M 150# M 300# M 150# M 300# M 150# M 300# M 150# M 300# M 150# M 300# Flanged Ends, DIN (DN) Flange (PN) Dimensions (mm) A1 B C1 D (kg) 35M 10/ M 25/ M 10/ M 25/ M 10/ M 25/ M 10/ M 25/ M 10/ M 25/ M 10/ M 25/ Threaded Ends 1-1/2" & 2" Dimensions (inches) A B C D (lbs.) 35M M M Threaded Ends, DIN (DN) 40 & 50 Dimensions (mm) A B C D (kg) 35M M M Contact factory for 3" dimensions -3-
4 Ordering Schematic / Model 79 Three-Way Control Valve 79TP with Top Positioner 79SP with Side Mounted Positioner 79MX Mixing Control Valve 79MXTP with Top Positioner 79MXSP with Side Mounted Positioner 6 Seat Material A 303SST B 316SST Q 303SST/Teflon Coated R 316SST/Teflon Coated V 303SS / Jorcote W 316SS / Jorcote 2 Inches DN /2" DN " DN50 Contact factory for 3" ordering infomration 7 Cv (Kv) (12,93) A 25.0 (21,55) B 30.0 (25,86) 3 Material CS Carbon Steel (WCB) S6 Stainless Steel (CF8M) 4 End Connections PT NPT BT BSPT BP BSPP SW FSW F3 300#FE F4 PN 40 DIN FE F5 150#FE F6 PN 16 DIN FE F7 PN 10 DIN FE F8 PN 25 DIN FE 5 Trim T3 303SS / Teflon Packing T6 316SS / Teflon Packing 8 A3B3A Dir B3B3A Rev N3Q3N Dir A8B8A Dir Q3Q3N Rev B8B8A Rev C3B3A3 3-9 Dir C8B8A8 3-9 Dir D3B3A3 3-9 Rev 35M D8B8A8 3-9 Rev E3B3A Dir E8B8A Dir 85M F3B3A Rev F8B8A Rev G3B3A Dir G8B8A Dir H3B3A Rev H8B8A Rev A5B5A Dir B5B5A Rev C5B5A5 3-9 Dir D5B5A5 3-9 Rev E5B5A Dir 55M F5B5A Rev G5B5A Dir H5B5A Rev -4-
5 MK79/79MX/0618 Ordering Schematic, Cont. 9 Accessories 0 AR Air Regulator H3 Handwheel 35M H5 Handwheel 55M H8 Handwheel 85M S6 316SS Bolting TS Travel Scale 10 Action 11 I/P 3 I/P 35M 4-20Ma/3-15 psi 5 I/P 55M 4-20Ma/3-15 psi 8 I/P 85M 4-20Ma/3-15 psi 9 I/P 35M/55M/85M 4-20Ma/3-15 psi Z 12 SMP A SMP DIR/REV 3-15 B SMP DIR/REV 3-9 C SMP DIR/REV 9-15 D SMP/IP DIR/REV 4-20 E SMP/IP DIR/REV 4-12 F SMP/IP DIR/REV G MK16IQ-S DIR/REV 4-20 (Hart & FM-App) H MK16IQ-B DIR/REV 4-20 (with gauges) J MK16IQ-FF DIR/REV 4-20 (Fieldbus w/ gauges) Z Jordan Valve, a division of Richards Industries 3170 Wasson Road Cincinnati, OH (f) info@richardsind.com Jordan Valve reserves the right to make revisions to its product, specifications, literature and related information without notice. Please visit our website at for the latest information on our products.
708BS Series Bellows Stem Seal
708BS Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL S CRN Registration Number Available Bellows stem seals eliminate fugitive emissions by surrounding the valve stem with
708 Series. Fractional Flow Control Valves. fractional flow control valves. CRN Registration Number Available
708 Series Fractional Flow Control s fractional flow control valves CRN Registration Number Available The Mark 708 was developed by Jordan to provide the most accurate control available for fractional
Mark 78 Series . JORDANVALVE. Globe Style Control Valve. CRN Registration Number Available
Mark 78 Series CRN Registration Number Available Globe Style Control Valve The Mark 78 pneumatic control valve is designed for accurate performance and simplified maintenance. This versatile product can
~. LOW FLOW Series Bellows Stem Seal. ~ a division of Jordan Valve
~. LOW FLOW 8000 Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES Bellows stem seals eliminate fugitive emissions by surrounding the valve stem with a pressure-tight
8000 Series Bellows Stem Seal
8000 Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES CRN Registration Number Available Bellows stem seals eliminate fugitive emissions by surrounding the valve stem
~. LOW FLOW Series. ~ a division of Jordan Valve. ~ h9.y.\:.~~q~ Fractional Flow Controls Valves HEAVY DUTY CONTROL VALVES.
~. LOW FLOW 8000 Series Fractional Flow Controls Valves HEVY DUTY CONTROL VLVES The Mark 8000 Series is a group of heavy-duty control valves specifically designed for process applications requiring full
2-IQ Series Smart Valve Positioners
Options & Accessories 2-IQ Series Smart Valve Positioners www.marwinvalve.com 2-IQ Series Smart Valve Positioners Marwin s 2-IQ Smart Positioner has superior accuracy, long-term reliability and ease of
VAREC 2010B/2020B PRESSURE AND VACUUM RELIEF VALVES
VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Weight-loaded relief valves that protect tanks from damage or deformation, minimize emissions to the environment and loss of product due to evaporation FEATURES
Introduction. Available materials. Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
VALVES & CONTROLS VAREC 00B/00B The Varec 00B/00B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction 00B
8000 Series. Fractional Flow Controls Valves HEAVY DUTY CONTROL VALVES. CRN Registration Number Available
8000 Series Fractional Flow ontrols Valves HEVY UTY ONTROL VLVES RN Registration Number vailable The Mark 8000 Series is a group of heavy-duty control valves specifically designed for process applications
Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT
1/4 to 2 NPT Features Direct mount ISO5211 Full Port 316 stainless steel ball valve 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve position indicator Rugged aluminum Type 4X weatherproof
98 Series Back Pressure. Valve Link. Features. Fisher Controls. August 1993 Bulletin 71.4:98
Series Back Pressure and Type Relief VL000 Valves FIELDVUE Valve Link Fisher Controls August Bulletin.: The Series (figure ) is used for back pressure or relief applications in liquid, gas, air, and steam
Baumann Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
TECHNICAL BULLETIN. Kämmer ColdFlow A Low temperature Control Valve. Experience In Motion FCD KMENTB /17
TECHNICAL BULLETIN Kämmer ColdFlow - 041000A Low temperature Control Valve FCD KMENTB4114-00 11/17 Experience In Motion Index 1. Introduction 2. Features and Benefits 3. Specification 4. Trim Design 5.
MultiPort Ball Valves
Subsidiary of Bray International, Inc. Subsidiary of BRY INTERNTIONL, Inc. & WY Multi-Port Valves Full Port/Standard Port / - Ball Valves SME CL 0/00 (PN0 to PN 0) 00/000 psi WOG ( to 9 Bar) MultiPort
M3P..G/A, M3P..F/A Modulating control valves (PN16) for chilled and hot water systems
MP..G/A, MP..F/A Modulating control valves (PN) for chilled and hot water systems Three-way or straight-through valves with magnetic actuators for modulating control of chilled and hot water systems. Short
Fisher 657 and 667 Size 30i - 76i Diaphragm Actuators
657 and 667 Size 30i - 76i Product Bulletin August 2016 Fisher 657 and 667 Size 30i - 76i Diaphragm Actuators Fisher 657 and 667, size 30i to 76i, spring-opposed diaphragm actuators position the valve
Performance!Nxt Release
June 04, 2018 Performance!Nxt Release 12.7220 Flowserve is pleased to announce the latest release of Performance!Nxt (P!Nxt), the industry's foremost Control Valve Sizing, Selection and Project Management
Performance!Nxt Release
March 05, 2018 Performance!Nxt Release 12.7210 Flowserve is pleased to announce the latest release of Performance!Nxt (P!Nxt), the industry's foremost Control Valve Sizing, Selection and Project Management
Level Measurement Continuous level measurement - Ultrasonic transmitters
Overview Configuration is a short-range integrated ultrasonic level transmitter. It is intrinsically safe (ATEX, CSA, FM, IECEx, NEPSI), 2 wire, to 20 ma loop powered, ideal for liquids, slurries, and
Data is only for informational purpose. All specifications are subject to change without notice.
MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV
Taylor Valve Technology, Inc
MULTI-ORIFICE VALVE MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JUL0-TVT-OKC SERIES
3-PORT SEAT VALVES PN16 WITH EXTERNALLY THREADED CONNECTIONS STAZ-16, STBZ-16, STCZ-53 DATASHEET
-PORT SEAT VALVES PN WITH EXTERNALLY THREADED CONNECTIONS STAZ-, STBZ-, STCZ- DATASHEET In small or medium-sized heating, ventilating and air conditioning plants as a control or safety shutoff valve. For
SV81H Safety and Relief Valve
Page TID BR Rev.0 UV SV8H Safety Relief Valve Description The SV8H have fied blowdown.no blowdown adjustment required when setting or testing the valve.it is designed for short blowdown on all medias.
Level Measurement Continuous level measurement - Ultrasonic transmitters
Overview Configuration is a short-range integrated ultrasonic level transmitter. This general purpose, 2-wire, to 20 ma loop powered transmitter is ideal for liquids, slurries, and bulk materials in open
2-PORT SEAT VALVES PN16 WITH FLANGED CONNECTIONS STAZ-16, STBZ-16, STCZ-52 DATASHEET
-PORT SEAT VALVES PN WITH FLANGED CONNECTIONS STAZ-, STBZ-, STCZ- DATASHEET In boiler, district heating and refrigeration plants, cooling towers, heating groups, in ventilation and air-handling units as
I ntroduction. RA Fast Running Electric Actuator. Features and Benefits
European Electronic Controls Catalogue Section E Product Bulletin RA-3100-8026 Issue Date 0303 RA-3100-8026 Fast Running Electric Actuator I ntroduction The RA-3100 series synchronous motor-driven reversible
Butterfly Control Valve. DMK/6 Series
Butterfly Control Valve DMK/6 Series UL Listed for US and Canada UL 842 and ULc C125 & C842 File # MH 18741 Models DMK 707/6 (3/4 NPT) DMK 710/6 (1 NPT) DMK 712/6 (1 1/4 NPT) DMK 715/6 (1 1/2 NPT) DMK
711, 728, 751. Ball Valve, Stainless steel Multi-port
Ball Valve, Stainless steel Multi-port Construction GEMÜ 711, 728 and 751 are 2/2-way stainless steel ball valves with top flange EN ISO 5211 in sizes 1/4 to 2 (DN 8 to DN 50). The top flange enables both
SMG VALVES A Unit of SOUTHERN MANUFACTURING GROUP, Inc. BULLETIN August 2009 PERMASEAL PLUG VALVES TECHNICAL SPECIFICATIONS
SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. ULLETIN 13.01-02 ugust 2009 PERMSEL PLU VLVES TEHNIL SPEIITIONS SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. Materials of onstruction ody & over arbon Steel
FxM. ISO7/1 thread, EN331 standard PN40~PN25(5MOP/20MOP) Size:1/4 ~2
BA VAVE - EVER ANDE F/F Model: E0 Advantica british gas, wras, en approved ball valves yellow stainless steel lever handle; FxF ISO/ thread, EN standard PN0~PN(MOP/0MOP) Size:/ ~ According to EN standard.
Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page
Explosion-Proof Gauge Pressure Transmitter
Technology Solutions T EK-B AR 3120A Explosion-Proof Gauge Pressure Transmitter PRESSURE www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction The Tek-Bar
Flowtronic D 607 Series
Flowtronic D 607 Series Proportional Technology www.asco.com FLOW CONTROL: 607 SERIES FLOWTRONIC D Flowtronic D Flowtronic D is a digitally operated flow controller up to 70 SCFM (2000 Nl/min). The Flowtronic
Stainless steel hygienic butterfly valves. F250 for imperial tubing. F251 for metric tubing.
Stainless steel hygienic butterfly valves. F for imperial tubing. F for metric tubing. Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
Series 3731 Electropneumatic Ex d Positioner Type with FOUNDATION TM Fieldbus communication
Series 3731 Electropneumatic Ex d Positioner Type 3731-5 with FOUNDATION TM Fieldbus communication Application Positioner for attachment to pneumatic control valves Travel: 3.6 to 200 mm Opening angle:
97100 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve
9700 NAMUR series, / & / > > Port size: /4 (ISO G or NPT), NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve >
Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve ARI-PREDU - ANSI Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling
CHRONOS IDP INTEllIGENT DIGITAl POSITIONER FOR CONTROl VAlVES
INTEllIGENT DIGITAl POSITIONER FOR CONTROl VAlVES CHRONOS IDP 76 TM INTRODuCTION The Chronos IDP76 intelligent digital valve positioners are digital-pneumatic devices using microprocessor technology and
Type. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
914L. Capacitive Level Transmitter. Features. 1 Datasheet 914L Capacitive level transmitter for liquids.
Capacitive Level Transmitter Features Capacitive level transmitter for liquids. Low maintenance, easy calibration and configuration. Easy installation directly into pressurized vessels. HART technology
Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
Taylor Valve Technology, Inc
MULTI-ORIFICE VALVE Taylor Valve MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JAN00-TVT-OKC
VVP10-H HART VALVE POSITIONER. Great Performance, Compact, Robust in Severe Conditions* HART 7 Communication Protocol. Electronic Coil Technology
VVP10-H HART VALVE POSITIONER Great Performance, Compact, Robust in Severe Conditions* HART 7 Communication Protocol Electronic Coil Technology Non-Contact Position Sensor (Hall Sensor) 4-20 ma NAMUR NE
NEOTECHA. PFA lined Ball Valves - Models SNB and SNC
NEOTECHA PFA lined stainless steel ball valve with short face to face and well proven trunnion mounted design for use in pharmaceutical and bio-engineering industries Features PFA lining offers highest
NDP-50 Series Specifications
NDP-50 Series Specifications Port Dimensions Intake & discharge connection: Polypropylene (PPG) 2 50mm DIN DN80 PN10 Kynar (PVDF) 2 50mm DIN DN80 PN10 Aluminum (ADC-12) 2 50mm DIN DN80 PN10 (with tapped
Choke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE95 MC SERIES Choke Valves Unique. Precise. Quality. Reliable. MOV Valve Principle of Operation Taylor Valve Technology Multi-Orifice Valve Design Principle Provides Precision Control. The two adjacent
Series 3730 Type Electropneumatic Positioner
Series 3730 Type 3730-0 Electropneumatic Positioner Application Single-acting or double-acting positioner for attachment to pneumatic control valves Set point Travel 4 to 20 ma 5.3 to 200 mm The positioner
Item 620A Multi-Way Sanitary Ball Valve
R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel
V88 series Redundant valve manifold systems - Semi modular 1oo2 Safety, 2oo2 Availability and 2oo3 Safety and Availability
oo Safety, oo Availability and oo Safety and Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil
P143 Pressure Regulator
P Pressure Regulator Versatile ontrol Accuracy ompact esign Low Pressure ut-off The Type P pressure regulator is ideal for natural gas, air, propane and general purpose gas pressure regulation. Uses include
AB13F DOUBLE FLANGED BUTTERFLY VALVES DN50 - DN2000 FEATURES TECHNICAL DATA OPTIONS ACCORDING TO
Quality BF LEVER OPERTED GERBOX OPERTED FETURES Designed and manufactured to S79. Vulcanized liner resists deformation. Rated to 00kpa from 0mm up to 00mm and 000kpa from 700mm up to 00mm. Stainless steel
Rosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
Material pressure (bar) (Cv (US) kv x 1,2 Seat
00 / poppet valves electromagnetic actuated, directly controlled G /, / NPT or flanged with NAMUR Interface TÜV-approval based on IEC 6 08, DIN V Valves for safety systems up to SIL Solenoid valve also
True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe
True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe SERIES Features Pressure rated 232 PSI (16 Bar) at 73 F (23 C) Full Port design for unrestricted flow Energized PTFE ball
FOSTEN AUTOMATION SÉRIE F500-SRT
FOSTEN AUTOMATION SÉRIE F500-SRT Pressure Transmitter with Remote Seals Pressure transmitter with remote seals. Low maintenance, easy calibration and configuration. Easy installation directly into pressurized
Valtek Logix Series Digital Positioner
Valtek Logix Series 1000 Digital Positioner Digital Positioner Single- or Double- Acting Two-stage Electronic Relay Vent and Cover Configurable DIP Switches LED Indicators Quick-Cal Button Customer Interface
Universal Compact Extruded Cylinders
Universal Compact Extruded Cylinders Clippard s new Compact, Extruded Body Cylinders are available in double acting, double rod, single acting spring return, and single acting spring extended models. Universally
Operating pressure (bar)
/ poppet valves electromagnetic actuated, directly controlled G /4, /4 NPT, G /, / NPT or flanged with NAMUR Interface Main application: single operated actuators for plants Valves for safety systems up
Series 3731 TROVIS SAFE Electropneumatic Ex d Positioner
Series 3731 TROVIS SAFE 3731-3 Electropneumatic Ex d Positioner with HART communication Application Single-acting or double-acting Ex d positioner for attachment to pneumatic on/off valves in safety-instrumented
Vonk Choke Valve. Flow Control. Features and benefits. Product overview. Technical data. General applications. Model YCV (Y-Type body)
Flow Control Vonk choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability in the most challenging applications.
M.R.P. Dt
M.R.P LIST Dt. 13.09.2013 "ZOLOTO " Bronze Globe Valve (Screwed). 1001. 8mm 10mm 15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm 416.00 416.00 416.00 601.00 791.00 1305.00 1723.00 2513.00 4308.00 7174.00
EnviZion TM Hygienic Diaphragm Valve
EnviZion TM Hygienic Diaphragm Valve Experience the Future with EnviZion The Biopharm industry relies on hygienic diaphragm valves for demanding process applications due to their unique balance of clean-ability,
LF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
Choke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE1958 MDA / MDAS Choke Valves Unique. Precise. Quality. Reliable. MDA / MDAS SERIES CHOKE VALVES FEATURES enefits T aylor Valve MDA / MDAS Series Chokes are made with wear resistant material to extend
334A. High Performance Butterfly Valves to suit API standard 150lb/300lb Rating. Double offset geometry. 50 to 600mm
High Performance Butterfly Valves to suit API standard lb/00lb Rating A Valve nominal size to 00mm Max.working pressure MPa Working temperature range 0 0 Cast steel Stainless steel.9 5. 9 FS Fire safe
Series 3730 Electropneumatic Positioner Type
Series 3730 Electropneumatic Positioner Type 3730-0 Application Single-acting or double-acting positioner for attachment to pneumatic control valves Reference variable Travels 4 to 20 ma 5.3 to 200 mm
PanaFlow Gas Meter System
PanaFlow Gas Meter System Panametrics Ultrasonic Flow Meters for Gas The PanaFlow Gas Meter System is a complete ultrasonic flow meter offering for gas applications with a unique combination of accuracy,
Flow Measurement SITRANS F M
Overview Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage proportional to
PROFIBUS-PA Positioner Type 3785
PROFIBUS-PA Positioner Type 3785 Application Single-acting or double-acting PROFIBUS-PA positioner for attachment to pneumatic control valves. Rated travel from 7.5 to 120 mm Opening angle up to 120 Smart,
Choke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE198 MDI / MDIS Choke Valves Unique. Precise. Quality. Reliable. MDI / MDIS SERIES CHOKE VALVES FEATURES Benefits T aylor Valve MDI / MDIS Series Chokes are made with wear resistant material to extend
Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
Subsea Valves.
Subsea Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 Fax: + 00 FITOK, Inc. North Promenade lvd., Suite 0, Stafford, Texas, US Tel.: + 00 Fax:
V88 series Redundant valve manifold systems - Semi modular 2oo2 Availability
oo Availability > > Semi modular design - Maxseal valves > > Stainless steel visual indicators and exhaust guards as standard > > able terminations inside coil housing > > International approvals > > Stainless
FOSTEN AUTOMATION SÉRIE F500-A
FOSTEN AUTOMATION SÉRIE F500-A Absolute Pressure Capacitive Transmitter Absolute Pressure Capacitive Transmitter Low maintenance, quick calibration and configuration. Installation directly into pressurized
Series 3731 Type Electropneumatic Ex d Positioner with FOUNDATION TM fieldbus communication
Series 3731 Type 3731-5 Electropneumatic Ex d Positioner with FOUNDATION TM fieldbus communication Application Positioners for attachment to pneumatic control valves Rated travels from 3.6 to 200 mm Opening
1.4 F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A TECHNICAL DATA
DOUBE FANGED BUTTERFY VAVE F 01-A TS-version (through-going shaft) TECNICA DATA Nominal diameter: 0 1 Face-to-face: EN Series ISO Series API 0 Table C BS 1 short NF E -30.1 Flange accommodation: DIN 01
Mounting set for electropneumatical positioner type APIS
Mounting set for electropneumatical positioner type APIS a) b) Fig.1. Positioner type APIS-1X0-... with mounting kit APIS-A0000-SS(SO) (positioner mounted on column type actuator P or R by Polna Ltd company).
Fisher i2p-100 Electro-Pneumatic Transducer
Fisher i2p-100 Electro-Pneumatic Transducer The Fisher i2p-100 electro-pneumatic transducer, uses a converter module that converts a milliampere input to a proportional pressure output. Both the current
Item 305D 3-Piece Ball Valve
ZIPSON'S 0, -piece high performance ball valve with ISO direct mounting pad is designed for the high pressure industrial pipe line in full port product. To compare the economic valve in the market, Zipson
Series 3730 Electropneumatic Positioner Type with PROFIBUS-PA communication
Series 3730 Electropneumatic Positioner Type 3730-4 with PROFIBUS-PA communication Application Positioner for attachment to pneumatic control valves Travels 3.6 to 200 mm Opening angle 24 to 100 Smart,
Flow Measurement SITRANS F M
low sensor MAG P Overview Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage
3/2 5/2 SERIES 362/562
Manual and Pilot Operated Spool Valves 6L Stainless Steel and Brass Bodies /4" to " NPT / / 6/6 Features Ideal for valve automation for the oil and gas market Reliable, robust design with high flow performance
selection of special materials is available to handle almost any fluid.
For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications
Performance!Nxt Release
June 05, 2017 Performance!Nxt Release 12.7180 Flowserve is pleased to announce the latest release of Performance!Nxt, the industry's foremost Control Valve Sizing, Selection and Project Management Software.
ICO4S 2/2, 3/2 or 5/2 poppet valves electromagnetic actuated, directly controlled
ICO4S /, / or 5/ poppet valves > > Port size: /4... /4 (ISO G/NPT) or manifold version > > Reliable and long life, ideal for a one time installation > > Direct acting solenoid valve for the control of
FCS PROBE FLOW MONITOR PRODUCT OVERVIEW
FCS PROBE FLOW MONITOR PRODUCT OVERVIEW Mounting Instructions Areas of turbulent flow occur whenever there is a change in the pipe construction (e.g. pipe inlets, pipe outlets, pipe elbows). To avoid an
K10 Intrinsically Safe Electro-Pneumatic Positioner Operating Manual
K0 Intrinsically Safe Electro-Pneumatic Positioner Operating Manual Pneumatic Connection Single Acting Actuator (Spring Return): For single acting actuators Outlet Port 2 is to be plugged. Outlet Port
Immersion Temperature Sensors
1 782 1782P01 Symaro Immersion Temperature Sensors QAE2164 QAE2174 Active sensors for acquiring the water temperature in pipes and tanks Operating voltage AC 24 V or DC 13535 V Signal output DC 010 V or
Digital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8696 can be combined with Digital smart positioner Automatic teach function Contact-free position sensor Compact
Signet 2552 Metal Magmeter Flow Sensors
Signet 2552 Metal Magmeter Flow s Features Test certificate included Award winning hot-tap magnetic flow sensor up to DN2550 (102 in.) Patented Magmeter technology* Operating range 0.05 to 10 m/s (0.15
Cast Iron Valves. JIS 5K/10K, Class 125
Valves JIS K/K, Class STNDRD PRODUCTION RNGE Valve Type Nominal Pressure Fig. No. Construction (Note) Page Gate valves JIS K JIS K JIS K JIS K JIS K K Class Class Class Class FCM FCL FCLS FCLU FCWI FCHI
1.1 Z 011-A WAFER TYPE BUTTERFLY VALVE Z 011-A TECHNICAL DATA
WAFER TYPE BUTTERFY VAVE Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter: (
3/2 Directional control valves Direct solenoid operated poppet valves Internal thread G 1/2, 1/2 NPT or flanged with NAMUR interface
9805 / Directional control valves Direct solenoid operated poppet valves Internal thread G /, / NPT or flanged with NAMUR interface Main application: single operated actuators for plants TÜV-approval based
Rosemount 1595 Conditioning Orifice Plate
Product Data Sheet Rosemount 1595 Rosemount 1595 Conditioning Orifice Plate Designed to provide superior performance in short straight pipe run applications Requires only two diameters of straight pipe
Series 3731 Type Electropneumatic Ex d Positioner with HART communication
Series 3731 Type 3731-3 Electropneumatic Ex d Positioner with HART communication Application Single-acting or double-acting Ex d positioner for attachment to pneumatic control valves. Self-calibrating,
Continuous level measurement Ultrasonic transducers
Siemens G 2013 Overview transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing effect reduces blanking distance
Features: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
Data Sheet T 8493 EN. Series 3793 TROVIS 3793 Electropneumatic Positioner with HART communication
Data Sheet T 8493 EN Series 3793 TROVIS 3793 Electropneumatic Positioner with HART communication Application Single-acting or double-acting positioner for attachment to pneumatic control valves. Self-calibrating,
Level instruments. Point level measurement - Capacitance switches. Pointek CLS300 5/31
Level instruments Overview The unique modular design of the provides a wide range of configurations, process connections, extensions and approvals to meet the temperature and pressure requirements of specific