97100 NAMUR series, 3/2 & 5/2 Indirect solenoid actuated spool valve

Transcription

1 9700 NAMUR series, / & / > > Port size: /4 (ISO G or NPT), NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual override with detent > > Variable valve solenoid combination Technical features Medium: Filtered, lubricated or nonlubricated and dry compressed air Operation: Indirect solenoid operated spool valve Operating pressure:... 8 bar ( psi) Orifice: 6 mm Port size: G/4, /4 NPT and : G/8, /8 NPT NAMUR Interface with integrated recirculation from the exhaust air to the acutator sping chamber Flow direction: Fixed Mounting position: Optional Ambient/Media temperature: C (... + F) Air supply must be dry enough to avoid ice formation at temperatures below + C ( F). Materials: Housing: Aluminium anodized Pilot flange: Plastic (PT) Flange plate: Aluminium Seals: NR Flow conversion: Cv US Gallon/min (water) = l/min (air) x 0,00 Kv m³/h (water) = l/min (air) x 0, Option selector Function) Substitute / way, spring return (/ way 0 spare adaptor plate supplied) / way, solenoid return (/ way spare adaptor plate supplied) / way valve, AP (all ports blocked) Ports size Substitute G/4 0 /4 NPT Voltage Substitute 4 V d.c V a.c. 00 Solenoid actuators Substitute See table on page & without notice, the specifications given in this document. (004 - f) 0 Norgren GmbH / en.4.7.0

2 9700 NAMUR series, / & / Technical data Housing: Aluminium anodized, Seals: NR C ( F) Symbol Solenoids for 97xxx0 only, standard voltages Power consumption 4 V d.c. 0 V a.c. (W) (VA) Port size Rated current 4 V d.c. 0 V a.c. (m A) (m A) & & 4 Protection class IP/NEMA,8 70 IP6 (with,6 0 IP6 (with 8 IP6 (with 8 IP6 (with IP6 (with,7 IP6 (with,7 IP66 (with Actuation/Return Ex-Protection (ATEX-Category) Temperature Ambient/ Media ( C) Electrical connection Connector 70-80, form *) Connector 70-80, form A *) II G Ex na IIC T Gc II D Ex tc IIIC T9 Dc IP6 II G Ex na IIC T Gc II D Ex tc IIIC T9 Dc IP6 II G Ex mb IIC T4 Gb II D Ex mb tb T0 C Db II G Ex mb IIC T Gb II D Ex mb tb T9 C Db Special connector 70-80, form A *) Special connector 70-80, form A *) Cable length m Cable length m Connector *) Mx, DIN IEC Solenoid with yellow LED Standard voltages (±0%) 4 V d.c., 0 V a.c., other voltages on request. Design according to VDE 080, EN 004/ % duty cycle. *) Connector is not scope of delivery, see table»accessories«flow (l/min) Operating pressure (bar) (psi) (kg) Drawing Drawing 4 4 G/4 G/8 Flange Solenoid/Spring , /4 NPT /8 NPT Flange Solenoid/Spring , G/4 G/8 Flange Solenoid/Solenoid , /4 NPT /8 NPT Flange Solenoid/Solenoid , G/4 G/8 Flange Solenoid/Solenoid , /4 NPT /8 NPT Flange Solenoid/Solenoid , Suitable solenoids, see below only *) When ordering please indicate solenoid, voltage and current type (frequency). No. Circuit diagram *) (kg) No. No. 0, 00 0, 06 0, 046 0, 047 0, 06 0, , Approvals Approvals Datasheet ATEX 04x PT 06 ATEX 0 N/en x PT 0 ATEX 0 N/en Electrical connection M x Pin Cable brown white blue 4 4 black en without notice, the specifications given in this document. (004 - f) 0 Norgren GmbH /

3 9700 NAMUR series, / & / Valves for minimal electrical power, included Ex ia Housing: Aluminium anodized, Seals: NR C ( F) Symbol Port size Actuation/Return Flow Operating pressure Drawing *) & & 4 (l/min) (bar) (psi) (kg) No. 4 4 G/4 G/8 Flange Solenoid/spring , /4 NPT /8 NPT Flange Solenoid/spring , G/4 G/8 Flange Solenoid/solenoid , 9700 /4 NPT /8 NPT Flange Solenoid/solenoid , G/4 G/8 Flange Solenoid/solenoid , /4 NPT /8 NPT Flange Solenoid/solenoid , Suitable solenoids, see below only *) When ordering please indicate solenoid, voltage and current type (frequency). Solenoids for 97xxx only, standard voltages Power consumption 4 V d.c. 0 V a.c. (W) (VA) Rated current 4 V d.c. 0 V a.c. (m A) (m A) Protection class IP/NEMA,8 70 IP6 (with 0,7,0 *) 9 4 IP6 (with 8 IP6 (with IP6 (with,7 IP6 (with,7 IP66 (with Ex-Protection (ATEX-Category) Temperature Ambient/ Media ( C) Electrical connection Connector 70-80, form *) Connector 70-80, form A *) II G Ex na IIC T Gc II D Ex tc IIIC T9 Dc IP6 II G Ex mb IIC T4 Gb II D Ex mb tb T0 C Db II G Ex mb IIC T Gb II D Ex mb tb T9 C Db Special connector 70-80, form A *) Cable length m Cable length m Connector *) Mx, DIN IEC Solenoid with yellow LED Standard voltages (±0%) 4 V d.c., 0 V a.c., other voltages on request. Design according to VDE 080, EN 004/ % duty cycle. *) Connector is not scope of delivery, see table»accessories«solenoid actuators for intrinsically-safe circuits Nominal resistance RN coil (Ω) Min. required switching current (ma) Resistance Rw 60 coil (Ω) Required voltage at terminal Rw 60 (V) IP Protection class 7 7 4,8 IP6 (with Ex-Protection (ATEX-Category) II G Ex ia IIC T6/ T4 Ga Temperature Ambient/ Media ( C) T6: T4: Drawing Circuit diagram (kg) No. No. 0, 00 0, 04 0, 046 0, 06 0, , Drawing Circuit diagram (kg) No. No. 0, 09 When selecting an intrinsically safe power supply, the permissible maximum values according to the Certificate of Conformity should be taken in account. On the other hand, the low effective inductivity and capacity can be ignored. Connector form A is not scope of delivery,, see table»accessories» Approvals Approvals ATEX FM Datasheet 09 PT 0 ATEX 4 CSA-LR N/en x PT 06 ATEX 0 N/en x PT 0 ATEX 0 N/en Electrical connection M x Pin Cable brown white blue 4 4 black / without notice, the specifications given in this document. (004 - f) 0 Norgren GmbH en.4.7.0

4 9700 NAMUR series, / & / Accessories Connector pin, 90 4-pin, 90 4-pin, straight 4-pin, straight Silencer Page 8 Page 8 Page 8 Page 8 Page , form A 008 ( m cable,4-core) , form 00 ( m cable,4-core) 006 (without cable) 007 ( m cable, 4-core) 00 ( m cable, 4-core) 00 (without cable) C/S (/8 NPT) M/S (G/8) NAMUR accessories Throttle control plate *) Flange plate Yoke Distance plate for pressure switches Mounting plate Quick exhaust module *) Page 7 Page 6 & 7 Page 7 Page 7 Page (NAMUR single connection plate) (90 ) (NAMUR-rip use in combination wi h 06790) 066 (80 ) 066 (70 ) *) The throttle control plate has a minimum flow rate for safety reason. *) Technical details see catalogue page en Drawings Valves 0 0 G/4 G/ , 4, 6, 8, 0, 7, 7, M, 9, G/4 G/ M 9,, O ring ø 6 x mm in scope with delivery Hole ( mm deep) coding stud 40 7, 7, en without notice, the specifications given in this document. (004 - f) 0 Norgren GmbH /

5 9700 NAMUR series, / & / Solenoids 9 6 9, , Ø9 Ø9 4 9, 9 4 9, 8, 0 M x ~8 4, 9, Ø ,, 4, M6 x, 8 Connector 4 x 90 turnable Ø9 Circuit diagrams / without notice, the specifications given in this document. (004 - f) 0 Norgren GmbH en.4.7.0

6 9700 NAMUR series, / & / NAMUR hole pattern (driving side) Conversion instructions of / into / way function / way function / way function M / / 4 4 Port (A) Coding stud threaded M (0 deep) 4 Port (R) 6 / resp. / way function can be achieved just by swapping enclosed adaptor plates. Make sure marker and arrow do match as shown on above drawing. Original mode of supply: / function. 6 Arrow 6 Marker Accessories Silencer : M/S, C/S 4 6, Single connection plate : , M (4x) 6, 4, 6 4, G/4 9 ø, /8 ø, ø 9, 9 G/4 ø 9 ø 4, 7 en without notice, the specifications given in this document. (004 - f) 0 Norgren GmbH /

7 9700 NAMUR series, / & / NAMUR slot : 0679 Yoke : 0409 Throttle control plate : , x, M ,,, , M,, A A Distance plate for pressure switches : Mounting plate : 064 (90 ) 6 9 : 066 (80 ) : 066 (70 ) M M , M M , / without notice, the specifications given in this document. (004 - f) 0 Norgren GmbH en

8 9700 NAMUR series, / & / Connector 90, 4 pin, with PUR cable 4 pin, without cable 4 4 ~ C ~ C E ~ F ø D ø D E ø D ø D ø D ~ F ø D C ød ød F Wire x dim. Cable length (m) (g) M x,, 7 4 x 0,4 mm M x,, 7 4 x 0,4 mm C ød E F (g) M x, 40, 0 Pg Straight, 4 pin, with PUR cable Straight, 4 pin, without cable ~ C ~ C C ød ød Wire x dim. Cable length (m) (g) M x, 40 4 x 0,4 mm M x, 40 4 x 0,4 mm C ød E (g) M x, 40, 0 Pg Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. en without notice, the specifications given in this document. (004 - f) 0 Norgren GmbH /