Mark 78 Series . JORDANVALVE. Globe Style Control Valve. CRN Registration Number Available
|
|
- Cody Morris
- 5 years ago
- Views:
Transcription
1 Mark 78 Series CRN Registration Number Available Globe Style Control Valve The Mark 78 pneumatic control valve is designed for accurate performance and simplified maintenance. This versatile product can be used on a variety of applications, including viscous/corrosive liquids, process gases or utility steam in process or utility service. FUNCTON The Mark 78 g lobe style control valve utilizes a cage retained seat design with unbalanced plug. The top entry cage design allows maintenance while the valve is in the line. The trim comes with stainless steel standard, or can easily accommodate special materials for maximum corrosion resistance. Threaded, welded, or flanged ends complete a tru ly versatile valve that covers a wide variety of applications from utility steam to process gases, to corrosive/viscous liquids. FATURS Top entry cage design - allows easy, in-line maintenance Optional soft seats - enables bubble-tight ANS Class V shutoff Characterized flow options - including linear, equal percentage, quick opening, or an equal-linear combination High capacity service - Cv's up to 60 (Kv's up to 51,6) in 2" (DN50) valves Lift out seats - seats are not screwed in, and ift out of the valve body for easy access and quick maintenance. Versatile use - can be used on a variety of applications including liquids, gases or steam. JORDANVALV Jordan Valve a division of Richards ndustries 3170 Wasson Road Cincinnati, OH (f) info@richardsind.com
2 MARK 78 GLOB STyL CONTROL v ALV SPCFCATONS Sizes: 1/2" through 2" (DN15 through DN50) nd Connections Threaded - NPT, BSPT, BSPP ANS Flanges-, DN Flanges - PN 10/16, PN25/40 Companion Flanges - PN10/16, PN25/40 ntegral Flanges - ANS, Body Materials Bronze Carbon Steel Stainless Steel Trim Materials 316 Stainless Steel Seats Teflon/Stainless Steel Metal 0-Ring/Gasket Viton, PDM Shutoff ANS Class V with soft seat ANS Class V with hard seat 0-Ring/Gasket Viton, PDM Actuator Sizes: 35M, M, 85M Signal Range: 3-15 psi (0,2-1,0 bar) standard Maximum Actuator Pressure: 45 psi (3, 1 bar) Available with side or top mounted positioners. Flow Characteristics qual Percentage Linear Quick Opening qual-linear combination Rangeability qual percentage or equal-linear: 60: 1 Linear: 30: 1 Recovery Factor, FL: 0.9 Valve Capacity, Cv (Kv) 0.. < ::>.iii ::; qual Linear Quick 4.4 3, , PRSSUR TMPRATUR CHARTS Pressure/Temperature Ratings, Soft Seat Temperature 'C 38 ro 1 1G TT '\. 400 "\. 300 '\. \. 200 "\. ", '\. 7 '\ Temperature <f Pressure Temperature Limits Viton: -20 F to 400 F (-29 C to 204 C) PDM: -40 F to 450 F (-40 C to 232 C) Pressure/Temperature Ratings, Hard Seat PS (BAR) BRZ PS (BAR) CS/SS (26) -2-
3 MARK 78 GLOB STyL CONTROL VALV S PCFCATONS Maximum Working Pressure 100 F nd Connection Bronze Carbon Steel Stainless Steel Size T T T FLG FLG FLG FLG FLG SW FLG FLG FLG SW Pressure At Maximum Temperature O-nng Bronze Carbon Steel Stainless Steel T T Material FLG FLG T FLG FLG FLG SW FLG FLG FLG SW PDM 160/ / / / /450 /450 / / / / /450 Maximum Allowable P. PS Note: Can not exceed valve psi 100 F qual Percentage Linear qual-linear Valve Size Valve Cv Actuator Size ATO /2" - 1" M 400 3/4" - 1" M 225 1" M 125 1/2" - 1" M 600 3/4" - 1" M 350 1" M M M 100 2" M 40 2" M 75 2" 8-30 M 80 2" M 100 1/2" - 1" M 400 1/2" - 1" 4.6 M 600 3/4" - 1" M 225 3/4" - 1" 9.0 M 350 1" M 125 1" 12.7 M /2" M /2" -2" 40 85M 100 2" 60 M 40 2" 60 85M 75 AT or with ATC 3-15 or With si Quick 0Denina ATC 40 psi Note: 1/2" - 2 with positioner ATO actuator is bench set@ 6-30 psi ATC actuator is bench set@ 3-15 psi. -3-
4 MARK 78 GLOB STyL CONTROL VALV DMNSONS B c /4" NPT Flanged nds Dimensions (inches) 35M M /2" M M /4" 1" 35M M M M M M M M M 8.75' _1 12 _ as _ M_... 8_.7_5_... 14_._13 2_.1_8 1_5_.0_0 6_1_ M 9.25' M 9.25' " M M M M F only for welded and threaded flanges, the face-to-face will be 11.00' and not be ANS standard Threaded & FSW nds Flanged nds, Metric Dimensions (inches) 112 & 1--35_M_+-4_.5_0_...1_0_.8_7-1-_1_.3_1_.._9_.5_0-1 10_-1 3/4" M " 1-1/2" 2 35M M M M M M Threaded nds & FSW, Metric 15 35M 10/ M 25/ M 10/ M M 10/ M 25/ M 10/ M M 10/ M 25/ Not per DN ,4 14,5 6,3 15,4 6,3 15,4 23,1 27,7 24,9 29,5 DN15 &..._35_M_.. 1_1_4 2_7_6 _... 24_1_.,_4_,5 DN20 M ,6 DN25 DN40 DN50 35M ,5 M ,6 M ,4 85M ,0 M ,4 85M ,0-4- ntegral flange ends available in WCB and CF8M for 1-1/2" & 2" All bronze ends are threaded
5 MARK 78 GLOB STYL CONTROL v ALV O RDRNG SCHMATC -----i Model 5 Seats (Characteristic) 78 Standard A Linear Hard 78TP Top Mounted Positioner B Linear Soft 78SP Side Mounted Positioner c qual Percentaqe Hard D qual Percentaqe Soft Quick Open Hard F Quick Open Soft G qual Linear Hard H qual Linear Soft z (1,5) (2,2) Body Material (3,8) BR Bronze (4,0) cs Carbon Steel (WCB) (6,9) S6 Stainless Steel (CF8M) M 9.0 (7 7) N 11.5 (9,9) p 12.0 (10) Q 12.2 (10,5) 1 & 2 nd Connections R 12.7 (10,9) PT NPT 9 15 (25,8) BT BSPT B 30 (25,8) BP BSPP v 35 (30,1) SW FSW u 40 (34,4) F5 F w 45 (38,7) F3 F c 50 (43,0) 15 F 1 60 (51,6) 13 F z F7 PN 10 DN F F6 PN 16 DN F F8 PN 25 DN F F4 PN40 DN F ll 316SS Teflon Braided Packin -5-
6 MARK 78 GLOB STyL CONTROL V ALY MK78/0517 ORDRNG SCHMATC <CoN'r> 7&8 Actuator Range Range Actuator 78& 78TP A 3-15 DR 3 35M B 3-15 RV 5 M c 3-9 DR 8 85M D 3-9 RV 9-15 DR F 9-15 RV G 6-30 DR H 6-30 RV 78SP A DR B RV 9& 10 Dia hragm Material Size 3 35M B Buna-N 5 M 8 85M 17 v 0-Ring PDM Vi ton 11 & 12 Actuator Type Size 78 A Standard 3 35M 5 M 8 85M 78SP with MK161Q - T - s D R 78TP Air-to-Close Air-to-Open 18 A D G H 19 0 F SMP SMP DR/RV 3-15 SMP/P DR/RV 4-20 MK161Q DR/RV W/ HART MK161Q-B DR/RV W/O HART PD Compliance Not Reauired C Category 1 For boxes 7 & 8, 9 & 10, and 11 & 12, the actuator size choice must match JORDANVALV Jordan Valve a division of Richards ndustries 3170 Wasson Road Cincinnati, OH (f) info@richardsind.com
Mark 79/79MX Series. Control Valves Mark 79/79MX Three-Way Control Valves. Three-Way Control Valves. Operation. Features
Mark 79/79MX Series Three-Way Control Valves The Mark 79 is a pneumatic 3-way control valve for use in either bypass or mixing service. The MK79 utilizes the unique sliding gate trim design to provide
More information708BS Series Bellows Stem Seal
708BS Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL S CRN Registration Number Available Bellows stem seals eliminate fugitive emissions by surrounding the valve stem with
More information708 Series. Fractional Flow Control Valves. fractional flow control valves. CRN Registration Number Available
708 Series Fractional Flow Control s fractional flow control valves CRN Registration Number Available The Mark 708 was developed by Jordan to provide the most accurate control available for fractional
More information8000 Series Bellows Stem Seal
8000 Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES CRN Registration Number Available Bellows stem seals eliminate fugitive emissions by surrounding the valve stem
More information~. LOW FLOW Series Bellows Stem Seal. ~ a division of Jordan Valve
~. LOW FLOW 8000 Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL VALVES Bellows stem seals eliminate fugitive emissions by surrounding the valve stem with a pressure-tight
More information~. LOW FLOW Series. ~ a division of Jordan Valve. ~ h9.y.\:.~~q~ Fractional Flow Controls Valves HEAVY DUTY CONTROL VALVES.
~. LOW FLOW 8000 Series Fractional Flow Controls Valves HEVY DUTY CONTROL VLVES The Mark 8000 Series is a group of heavy-duty control valves specifically designed for process applications requiring full
More information2-IQ Series Smart Valve Positioners
Options & Accessories 2-IQ Series Smart Valve Positioners www.marwinvalve.com 2-IQ Series Smart Valve Positioners Marwin s 2-IQ Smart Positioner has superior accuracy, long-term reliability and ease of
More information98 Series Back Pressure. Valve Link. Features. Fisher Controls. August 1993 Bulletin 71.4:98
Series Back Pressure and Type Relief VL000 Valves FIELDVUE Valve Link Fisher Controls August Bulletin.: The Series (figure ) is used for back pressure or relief applications in liquid, gas, air, and steam
More informationTECHNICAL BULLETIN. Kämmer ColdFlow A Low temperature Control Valve. Experience In Motion FCD KMENTB /17
TECHNICAL BULLETIN Kämmer ColdFlow - 041000A Low temperature Control Valve FCD KMENTB4114-00 11/17 Experience In Motion Index 1. Introduction 2. Features and Benefits 3. Specification 4. Trim Design 5.
More informationElectric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT
1/4 to 2 NPT Features Direct mount ISO5211 Full Port 316 stainless steel ball valve 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve position indicator Rugged aluminum Type 4X weatherproof
More informationSV81H Safety and Relief Valve
Page TID BR Rev.0 UV SV8H Safety Relief Valve Description The SV8H have fied blowdown.no blowdown adjustment required when setting or testing the valve.it is designed for short blowdown on all medias.
More informationBaumann Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
More informationPerformance!Nxt Release
June 04, 2018 Performance!Nxt Release 12.7220 Flowserve is pleased to announce the latest release of Performance!Nxt (P!Nxt), the industry's foremost Control Valve Sizing, Selection and Project Management
More informationAB13F DOUBLE FLANGED BUTTERFLY VALVES DN50 - DN2000 FEATURES TECHNICAL DATA OPTIONS ACCORDING TO
Quality BF LEVER OPERTED GERBOX OPERTED FETURES Designed and manufactured to S79. Vulcanized liner resists deformation. Rated to 00kpa from 0mm up to 00mm and 000kpa from 700mm up to 00mm. Stainless steel
More information8000 Series. Fractional Flow Controls Valves HEAVY DUTY CONTROL VALVES. CRN Registration Number Available
8000 Series Fractional Flow ontrols Valves HEVY UTY ONTROL VLVES RN Registration Number vailable The Mark 8000 Series is a group of heavy-duty control valves specifically designed for process applications
More informationChoke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE198 MDI / MDIS Choke Valves Unique. Precise. Quality. Reliable. MDI / MDIS SERIES CHOKE VALVES FEATURES Benefits T aylor Valve MDI / MDIS Series Chokes are made with wear resistant material to extend
More informationChoke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE95 MC SERIES Choke Valves Unique. Precise. Quality. Reliable. MOV Valve Principle of Operation Taylor Valve Technology Multi-Orifice Valve Design Principle Provides Precision Control. The two adjacent
More information914L. Capacitive Level Transmitter. Features. 1 Datasheet 914L Capacitive level transmitter for liquids.
Capacitive Level Transmitter Features Capacitive level transmitter for liquids. Low maintenance, easy calibration and configuration. Easy installation directly into pressurized vessels. HART technology
More informationIntroduction. Available materials. Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
VALVES & CONTROLS VAREC 00B/00B The Varec 00B/00B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction 00B
More informationMultiPort Ball Valves
Subsidiary of Bray International, Inc. Subsidiary of BRY INTERNTIONL, Inc. & WY Multi-Port Valves Full Port/Standard Port / - Ball Valves SME CL 0/00 (PN0 to PN 0) 00/000 psi WOG ( to 9 Bar) MultiPort
More informationItem 620A Multi-Way Sanitary Ball Valve
R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel
More informationSpray Nozzle Catalog A guide to spray nozzle selection
Spray Catalog A guide to spray nozzle selection A selection guide to nozzles that will optimize your showering applications. How to Use This Catalog How to identify, specify and order Kadant spray nozzles
More informationCHECK VALVE CH-1601A (EN)
CH-1A (EN) ABOUT US FBV Inc. is an ISO 001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves
More informationPerformance!Nxt Release
March 05, 2018 Performance!Nxt Release 12.7210 Flowserve is pleased to announce the latest release of Performance!Nxt (P!Nxt), the industry's foremost Control Valve Sizing, Selection and Project Management
More informationItem 305D 3-Piece Ball Valve
ZIPSON'S 0, -piece high performance ball valve with ISO direct mounting pad is designed for the high pressure industrial pipe line in full port product. To compare the economic valve in the market, Zipson
More informationSMG VALVES A Unit of SOUTHERN MANUFACTURING GROUP, Inc. BULLETIN August 2009 PERMASEAL PLUG VALVES TECHNICAL SPECIFICATIONS
SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. ULLETIN 13.01-02 ugust 2009 PERMSEL PLU VLVES TEHNIL SPEIITIONS SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. Materials of onstruction ody & over arbon Steel
More informationVAREC 2010B/2020B PRESSURE AND VACUUM RELIEF VALVES
VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Weight-loaded relief valves that protect tanks from damage or deformation, minimize emissions to the environment and loss of product due to evaporation FEATURES
More informationSputtering Sensor ADVANTAGES
The INFICON is specifically designed for use in any sputtering process. The sensor body and cooling tubes are gold plated beryllium copper for maximum cooling efficiency in the sputtering environment.
More informationGeneral Specifications
General Specifications Model PR10 Inductive Conductivity Retractable fitting On-line measurements often present extra challenges, especially when routine maintenance is required. The PR10 is ideally suitable
More informationNDP-50 Series Specifications
NDP-50 Series Specifications Port Dimensions Intake & discharge connection: Polypropylene (PPG) 2 50mm DIN DN80 PN10 Kynar (PVDF) 2 50mm DIN DN80 PN10 Aluminum (ADC-12) 2 50mm DIN DN80 PN10 (with tapped
More information3-PORT SEAT VALVES PN16 WITH EXTERNALLY THREADED CONNECTIONS STAZ-16, STBZ-16, STCZ-53 DATASHEET
-PORT SEAT VALVES PN WITH EXTERNALLY THREADED CONNECTIONS STAZ-, STBZ-, STCZ- DATASHEET In small or medium-sized heating, ventilating and air conditioning plants as a control or safety shutoff valve. For
More informationChoke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE1958 MDA / MDAS Choke Valves Unique. Precise. Quality. Reliable. MDA / MDAS SERIES CHOKE VALVES FEATURES enefits T aylor Valve MDA / MDAS Series Chokes are made with wear resistant material to extend
More informationTaylor Valve Technology, Inc
MULTI-ORIFICE VALVE MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JUL0-TVT-OKC SERIES
More informationModel 685 Model 885. Model 985
Full lift safety valve with spring loading. (AIT) Model 5 Model 5 Model 95 ASME SI Units EP AP ES AS EP AP ES Model 5 Model 5 AS EP AP ES AS Model 95 The valve works as an automatic pressure releasing
More informationFeatures: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
More informationTrue Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe
True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe SERIES Features Pressure rated 232 PSI (16 Bar) at 73 F (23 C) Full Port design for unrestricted flow Energized PTFE ball
More informationFOSTEN AUTOMATION SÉRIE F500-A
FOSTEN AUTOMATION SÉRIE F500-A Absolute Pressure Capacitive Transmitter Absolute Pressure Capacitive Transmitter Low maintenance, quick calibration and configuration. Installation directly into pressurized
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page
More informationWAFER TYPE BUTTERFLY VALVE Z 011-A
WAFER TYPE BUTTERFY VAVE Z 0-A TECNICA DATA Nominal diameter: Face-to-face: EN Series (DIN 0 T3 ) ISO Series API 0 Table BS Series Flange accommodation: DIN PN // ANSI B., Class MSS SP Class AWWA C AS
More informationjamesbury Bulletin B101-2EN Issue 11/2007
/" " (DN 8 0) ELIMINATOR 00 CWP AND ANSI CLASS 00 THREADED END BALL VALVE The Eliminator ball valve, brings you the performance and design features you've been looking for all in a single, low-cost valve.
More informationFOSTEN AUTOMATION SÉRIE F500-SRT
FOSTEN AUTOMATION SÉRIE F500-SRT Pressure Transmitter with Remote Seals Pressure transmitter with remote seals. Low maintenance, easy calibration and configuration. Easy installation directly into pressurized
More informationContinuous level measurement Ultrasonic transducers
Siemens G 2012 Level measurement Overview EchoMax XPS/XCT transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing
More informationContinuous level measurement Ultrasonic transducers
Siemens G 2013 Overview transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing effect reduces blanking distance
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve ARI-PREDU - ANSI Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling
More informationSubsea Valves.
Subsea Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 Fax: + 00 FITOK, Inc. North Promenade lvd., Suite 0, Stafford, Texas, US Tel.: + 00 Fax:
More informationType. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
More informationECHOMAX XPS-10 ULTRASONIC TRANSDUCER
Datasheet ECHOMX XPS-10 ULTRSONIC TRNSDUCER Supplied by.com Call us on + (0)118 916 920 Email info@27able.com Overview transducers use ultrasonic technology to measure level in a wide range of liquids
More informationData is only for informational purpose. All specifications are subject to change without notice.
MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV
More informationStandard Bellows Metering Pumps
Standard Bellows Metering Pumps Bellows Metering Pumps operate on a positive displacement principle. Pumps are designed to displace both corrosive and noncorrosive fluids. Accurate to ± 0.5% from stroke
More informationVSG, VSL, VSKH and VSKV Two-line Metering Devices
VSG-KR These high quality, galvanized steel metering devices are designed for high-pressure (up to 400 bar) two-line systems. They can also be used in low to medium-pressure systems. They are available
More information2-PORT SEAT VALVES PN16 WITH FLANGED CONNECTIONS STAZ-16, STBZ-16, STCZ-52 DATASHEET
-PORT SEAT VALVES PN WITH FLANGED CONNECTIONS STAZ-, STBZ-, STCZ- DATASHEET In boiler, district heating and refrigeration plants, cooling towers, heating groups, in ventilation and air-handling units as
More informationElectromechanical pressure switches
Presentation Electromechanical pressure switches For control circuits, types ACW and ADW Presentation Pressure switches type ACW and ADW are switches for control circuits, with an adjustable differential.
More informationStainless steel hygienic butterfly valves. F250 for imperial tubing. F251 for metric tubing.
Stainless steel hygienic butterfly valves. F for imperial tubing. F for metric tubing. Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
More informationInsertion Flowmeter for compressed air and gases DN50 - DN700 (2-28 )
The flow meter is based on the thermal mass flow measurement and is ideal for measuring the flow of compressed air and gases in pipes from DN50 (2 ) to DN700 (28 ). With the, the consumption of compressed
More information1.1 Z 011-A WAFER TYPE BUTTERFLY VALVE Z 011-A TECHNICAL DATA
WAFER TYPE BUTTERFY VAVE Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter: (
More information1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA
UG TYPE BUTTERFY VAVE Z 04-A ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. TECNICA DATA Nominal diameter: 00 ( only PN0/) Face-to-face: EN Series (DIN T
More informationNEOTECHA. PFA lined Ball Valves - Models SNB and SNC
NEOTECHA PFA lined stainless steel ball valve with short face to face and well proven trunnion mounted design for use in pharmaceutical and bio-engineering industries Features PFA lining offers highest
More informationFront Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
More informationWAFER PATTERN BUTTERFLY TYP Z 011-A
WAFER PATTERN BUTTERFY TYP Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter:
More informationFront Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
More informationFxM. ISO7/1 thread, EN331 standard PN40~PN25(5MOP/20MOP) Size:1/4 ~2
BA VAVE - EVER ANDE F/F Model: E0 Advantica british gas, wras, en approved ball valves yellow stainless steel lever handle; FxF ISO/ thread, EN standard PN0~PN(MOP/0MOP) Size:/ ~ According to EN standard.
More informationContinuous level measurement Ultrasonic transducers
Siemens G 2012 Level Measurement Overview Echomax XPS/XCT transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing
More informationTaylor Valve Technology, Inc
MULTI-ORIFICE VALVE Taylor Valve MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JAN00-TVT-OKC
More informationMaterial pressure (bar) (Cv (US) kv x 1,2 Seat
00 / poppet valves electromagnetic actuated, directly controlled G /, / NPT or flanged with NAMUR Interface TÜV-approval based on IEC 6 08, DIN V Valves for safety systems up to SIL Solenoid valve also
More informationM.R.P. Dt
M.R.P LIST Dt. 13.09.2013 "ZOLOTO " Bronze Globe Valve (Screwed). 1001. 8mm 10mm 15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm 416.00 416.00 416.00 601.00 791.00 1305.00 1723.00 2513.00 4308.00 7174.00
More informationSignet 2552 Metal Magmeter Flow Sensors
Signet 2552 Metal Magmeter Flow s Features Test certificate included Award winning hot-tap magnetic flow sensor up to DN2550 (102 in.) Patented Magmeter technology* Operating range 0.05 to 10 m/s (0.15
More informationPig Valves Complete Solutions for Industrial Valves. jagflo.com
Pig Valves Complete Solutions for Industrial Valves Cat.no.:E-PV-00 Introduction ~ Quality Commitment How to Order Product Introduction Material Specifications Working Sequences Design Feature Dimensions
More information3/2 5/2 SERIES 362/562
Manual and Pilot Operated Spool Valves 6L Stainless Steel and Brass Bodies /4" to " NPT / / 6/6 Features Ideal for valve automation for the oil and gas market Reliable, robust design with high flow performance
More informationUNITED STATES MEXICO CANADA
www.legris.com Online catalog with technical information and training module to help you implement the right solution. Find technical data on your fitting and download a CAD in many different formats.
More information1.4 F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A TECHNICAL DATA
DOUBE FANGED BUTTERFY VAVE F 01-A TS-version (through-going shaft) TECNICA DATA Nominal diameter: 0 1 Face-to-face: EN Series ISO Series API 0 Table C BS 1 short NF E -30.1 Flange accommodation: DIN 01
More informationTRANSMISSOR DE PRESSÃO PIEZO RESISTIVO INTELIGENTE MICRO PROGRAMÁVEL SÉRIE PAS
TRANSMISSOR DE PRESSÃO PIEZO RESISTIVO INTELIGENTE MICRO PROGRAMÁVEL SÉRIE PAS Flexibility Data configuration with HART configurator Measuring of gauge and absolute pressure Reliability Continuous self-diagnostic
More informationCompact Bellows Pumps
Compact Bellows Pumps Compact Bellows Metering Pumps were specifically designed for metering applications requiring low discharge pressures. Compact pumps have been successfully applied in photo, X-ray
More informationInductive Cylinder Position Sensors
Inductive Cylinder Position Sensors 4-Wire DC (NPN and PNP) 2-Wire AC/DC Weld immune 250, 000, and 3000 psi designs C-Series F-Series Rating (psi) Probe Diameter Inductive Cylinder Position Sensors Pepperl+Fuchs
More informationButterfly Control Valve. DMK/6 Series
Butterfly Control Valve DMK/6 Series UL Listed for US and Canada UL 842 and ULc C125 & C842 File # MH 18741 Models DMK 707/6 (3/4 NPT) DMK 710/6 (1 NPT) DMK 712/6 (1 1/4 NPT) DMK 715/6 (1 1/2 NPT) DMK
More informationNDP-20 Series Specifications
NDP-20 Series Specifications Port Dimensions Intake & discharge connection: Polypropylene (PPG) 3/4 20 mm Female BSPT Aluminum (ADC-12) 3/4 20 mm Female BSPT Stainless Steel (316) 3/4 20 mm Female BSPT
More informationICO4S 2/2, 3/2 or 5/2 poppet valves electromagnetic actuated, directly controlled
ICO4S /, / or 5/ poppet valves > > Port size: /4... /4 (ISO G/NPT) or manifold version > > Reliable and long life, ideal for a one time installation > > Direct acting solenoid valve for the control of
More informationA3b.2 September, 2014 Supercedes October, 2013 INLINE CENTRIFUGAL PUMPS REPLACEMENT PARTS GUIDE VL, VLC, VLS, VLSC
INLINE CENTRIFUGAL PUMPS REPLACEMENT PARTS GUIDE VL, VLC, VLS, VLSC This guide is valid for all PACO brand products beginning with product codes 16, 17 and Grundfos prodcut codes 26 and 27 only. See back
More informationLevel Measurement Continuous level measurement - Ultrasonic transmitters
Overview Configuration is a short-range integrated ultrasonic level transmitter. This general purpose, 2-wire, to 20 ma loop powered transmitter is ideal for liquids, slurries, and bulk materials in open
More informationFront Load Dual Sensor
INFICON Front Load Dual crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The dual sensor provides a backup crystal and is essential
More informationGEMÜ 723 Motorized ball valve
Motorized ball valve Features High flow rates Low weight Choice of various body materials and connection types Available as shut off or control valve / and /-way versions available The / and/or /-way ball
More informationTHE BASICS OF QUICK DISCONNECTS
THE BASICS OF QUICK DISCONNECTS Contents The Basics of Quick Disconnects Snap Type (Ball Latching) Non-Latching No Shut-off Single Shut-off Double Shut-off Dry Break Quick disconnect fi ttings (abbreviated
More informationselection of special materials is available to handle almost any fluid.
For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications
More information914S. Capacitive Sanitary Pressure Transmitter. Features. 1 Datasheet 914S Capacitive Sanitary Pressure Transmitter
Capacitive Sanitary Pressure Transmitter Features Capacitive Sanitary Pressure Transmitter Low maintenance, quick calibration and configuration. Installation directly into pressurized vessels. HART technology
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8696 can be combined with Digital smart positioner Automatic teach function Contact-free position sensor Compact
More informationFull lift safety valve with spring loading. (AIT)
Full lift safety valve with spring loading. (IT) Model 95 Model 95 Model 995 Model 9 EN P ES Model 95 S P ES Model 95 S P ES S P ES S Model 995 Model 9 The valve works as an automatic pressure releasing
More informationFlow Measurement SITRANS F M
low sensor MAG P Overview Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage
More informationSUCTION FILTERS. PRESSURE (ISO :2002) Collapse, differential for the fi lter element (ISO 2941): 1 MPa (10 bar)
COMPONENTS SUCTION ILTERS SD MATERIALS Cover & housing: Anodized aluminium alloy or 6&6 only: Cover: anodized aluminium alloy Housing: steel ypass valve: Polyammide Seals: NR Nitrile (KM on request fl
More informationDouble stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
More informationBimetal spiral. Graduation: Scale angle Over-temperatures (occasionally allowed) Pointer. Dial. Accuracy (according to EN 13190) Class 1
Technical Datasheet GB Series With rigid or every angle stem Watertight casing stainless steel execution NS 100-125 - 150 Indication ranges included between -50 to + C Execution B made with traditional
More information711, 728, 751. Ball Valve, Stainless steel Multi-port
Ball Valve, Stainless steel Multi-port Construction GEMÜ 711, 728 and 751 are 2/2-way stainless steel ball valves with top flange EN ISO 5211 in sizes 1/4 to 2 (DN 8 to DN 50). The top flange enables both
More informationDigital Positioner 8049
Compact digital positioner for pneumatic control valves. Positioner can be integrated into valve actuator (no external moving parts for stroke feedback) Wide range of strokes - 8 mm No steady-state air
More informationIdeal Vacuum Products 5910 Midway Park NE, Albuquerque, NM Our products develop tomorrow s technologies
Our products develop tomorrow s technologies We are proud of our Ideal Vacuum Super-Seal bellows valves as they are manufactured to meet the highest standards. Our bellows valve design includes a hermetically
More informationEnviZion TM Hygienic Diaphragm Valve
EnviZion TM Hygienic Diaphragm Valve Experience the Future with EnviZion The Biopharm industry relies on hygienic diaphragm valves for demanding process applications due to their unique balance of clean-ability,
More informationMAXON SMARTLINK MRV. Intelligent MICRO-RATIO Valve Series. Technical Catalog
MAXON SMARTLINK MRV Intelligent MICRO-RATIO Valve Series Technical Catalog TABLE OF CONTENTS Product description... 1 Features and benefits... 1 Applications... 2 Approvals... 2 Model numbers... 3 Butterfly
More informationVonk Choke Valve. Flow Control. Features and benefits. Product overview. Technical data. General applications. Model YCV (Y-Type body)
Flow Control Vonk choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability in the most challenging applications.
More informationFlow Measurement SITRANS F M
Overview Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage proportional to
More informationLF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
More informationpneumatic function valves
pneumatic function valves Fluidline omponents, Inc lawson, MI 48017 www.legris.com flow control regulators meter out version meter in version bi-directional version fine adjustment screw locknut fine adjustment
More informationHYGROPHIL-F, Moisture Analyzer, Type , -11, -12, -13 series A
HYGROPHIL-F, Moisture Analyzer, Type 5673-10, -11, -12, -13 series A Moisture Measurement in gases and liquids Combined moisture and temperature sensor Multiple channel analyzer, max. 3 sensors can be
More informationSHORT PATTERN FLANGE BALL VALVES 5000 SERIES
SHORT PATTERN FLANGE BALL VALVES 5000 SERIES Jarecki 5000 Series metal seated ball valves with the Phantom Port incorporate the most innovative design in ball valves today. Proven in the field, they provide
More information