AB13F DOUBLE FLANGED BUTTERFLY VALVES DN50 - DN2000 FEATURES TECHNICAL DATA OPTIONS ACCORDING TO
|
|
- Maud Crawford
- 5 years ago
- Views:
Transcription
1 Quality BF LEVER OPERTED GERBOX OPERTED FETURES Designed and manufactured to S79. Vulcanized liner resists deformation. Rated to 00kpa from 0mm up to 00mm and 000kpa from 700mm up to 00mm. Stainless steel fasteners. Bi-directional bubble-tight sealing, with no leakage under pressure. ISO top mounting flange for easy actuation. Gearbox fitted as standard on all sizes 00mm and above. OPTIONS Full stainless steel lever. Gearboxes available for valves 0mm and below. Pneumatic and electric actuation. Limit switches and positioners. Extension fixed and non-fixed. Wide selection of body & disc materials: Cast Iron Ductile Iron luminium Bronze Stainless Steel Duplex Stainless Steel Other specialty materials on request Wide selection of seal materials: EPDM NBR FPM (Viton) Drilling to suit a wide range of flanging standards: S9 T/E S087 C (S9 T/D) S087 C NSI 0 EN 09 CCORDING TO S79 PI09 MSS SP7 TECHNICL DT Size Range: Pressure Classes: Face to face: FCTORY CCREDITED: ISO 9000:008 IS O ISO7 EN09 PN0, PN, PN, PN ccording to S79 Top Flange: ccording to ISO Flange Drilling: Temperature Range: Leakage Tests: Coating: CE879 S087-0 C to +90 C (EPDM standard) ccording to S79 Fusion Bonded Epoxy (S00 approved) SYSTEM 90 0:000 CERTIFICTION ISO 9000:000 UKS QULITY MNGEMENT 00 ISO 9000:008 CE0879 page BF_V_0078.
2 BF Quality DESCRIPTION & MTERILS Figure. VFI s BF is a Double Flanged Seal on Body Butterfly Valve used extensively in the water and wastewater market. SS STEM CONFIGURTION Round with key, square, double D and square options. EPDM DOUBLE O-RING Prevents leakage from stem. TOP FLNGE Top flange as per ISO standard for simple fitting of lever, gearbox or actuator. PTFE BUSHING Stem bushing reduces valve torque and prevents stem corrosion. DISC Precision profile disc provides bubble-tight shut-off and assures minimum torque value and long seal life. (other materials available) page DOUBLE FLNGED Drilled to S087C (others on request). EPDM SET (LINER) Vulcanised liner. Other materials available on request. DUCTILE IRON (FUSION BONDED EPOXY COTED) BODY For superior strength. CONNECTION BETWEEN DISC & SHFT Pin, spline or square connection are all available. BF_V_0078.
3 Quality BF MTERIL SPECIFICTIONS & PRTS LIST NO. DESCRIPTION MTERIL Body Ductile Iron (fusion bonded epoxy coated) Disc SS Stem SS Bushing PTFE Seat EPDM O-Ring EPDM 7 Pin SS DIMENSIONL DRWINGS DN0 - DN80 DN00 - DN00 M M SECTION - 7 E E h h h n-ød page b b FxF BF DN0 - DN0 S087 C ISO TOP FLNGE DN FxF b b h h h E E n-ød FLNGE M Weight NO. (kg) F0/ F07 /90-8 0/70 x F0/ F07 /90-8 0/70 x F0/ F07 /90-8 0/70 x F x F x F x. Note: Flange dimensions may vary from S087. For lever handle dimensions, refer to pg. BF_V_0078.
4 BF Quality MTERIL SPECIFICTIONS & PRTS LIST NO. DESCRIPTION MTERIL Body Ductile Iron (fusion bonded epoxy coated) Disc SS Stem SS EPDM Bushing PTFE Seat EPDM O-Ring EPDM 7 Pin SS DIMENSIONL DRWINGS DN0 - DN00 DN0 DN00 - DN00 B ØW Key SECTION B - B W SECTION - B h page h n-ød 7 E E h b FxF b BF DN00 - DN00 S087 C ISO TOP FLNGE DN FxF b b h h h E E n-ød FLNGE Weight ØW W NO. (kg) F F F F F F /8 - F /99 - F /70-0 F Note: Flange dimensions may vary from S087. For gearbox dimensions, refer to pg 7. BF_V_0078.
5 Quality BF MTERIL SPECIFICTIONS & PRTS LIST NO. DESCRIPTION MTERIL Body Ductile Iron (fusion bonded epoxy coated) Disc SS Stem SS Bushing PTFE Seat EPDM Note: Flange dimensions may vary from S087. For gearbox dimensions, refer to pg 7. O-Ring EPDM 7 Pin SS DIMENSIONL DRWINGS DN700 DN800 - DN00 DN700 DN800 - DN000 SECTION - h n-ød Lifting Lug 7 h page E h E b FxF b BF DN700 - DN00 S087 C ISO TOP FLNGE DN FxF b b h h h E E n-ød FLNGE Weight NO. (kg) F F F F F F F F F F F BF_V_0078.
6 7 BF - LEVER LEVER HNDLE & NOTCH PLTE Quality DIMENSIONL DRWINGS Figure. Lever handle l H H l l Note: lso available in stainless steel. Figure. Notch plate DN0 - DN80 DN00 - DN0 DN00 - DN00 CLOSE 8 CLOSE 8 7 CLOSE 0 OPEN OPEN 0 OPEN H H H page LEVER HNDLE NOTCH PLTE DN H H l l l FLNGE NO. H F F F F0. BUF_V_0078.
7 Quality BF - GB GERBOX DIMENSIONL DRWINGS DN0 - DN80 DN00 - DN00 DN700 DN800 - DN00 M M GERBOX DN0 - DN0 DN0 GERBOX DN00 - DN00 DN700 SECTION B - B l L B ØW W l l Key l B l DN00 - DN00 l8 l7 l DN800 - DN00 H H H page 7 GERBOX DN0 - DN00 ISO TOP FLNGE MODEL DN H L l l l Max. GB Drive Ratio Turns Weight M ØW W Torque (N.m) (Kg) DE :. 9 0 / 70 x -8 / -0 DE :. 9 0 / 70 x -8 / -0 DE :. 9 0 / 70 x -8 / -0 DE : x -0 DE : x -0 DE : x -0 DE : x DE : x DE : x DE : DE : DE : MODEL DN H H l l l l l Max. GB Drive Ratio Turns Weight M ØW W Torque (N.m) (Kg) D-0/ : D-0/ : D-0/ : D-0/ : D-0/ : D-0/ : D-0/ : BUF_V_0078.
8 BF DN0 - DN00 Quality page 8 TORQUE VLUE T PRESSURE CONDITION VLVE SIZE (DN) CLOSE-OFF TORQUE mm inch PN0 PN Note: Sizes DN00 and above available on request. CV VLUES FOR B SERIES Note: ll torque value in left chart were derived from the actual test data using water at 0 C. For torque used in other media, please contact VFI directly. Torques shown do not include safety factor. For actuator selection, VFI recommends: For EPDM, NBR, VITON seat, these valves be multiplied by. to. for single valve applications. Kindly note under certain conditions, hydrodynamic torque can meet or exceed seating and unseating torques. FLOWRTE FLOWRTE (%) VLVE OPENING (%) VLVE SIZE (DN) CV VLUE mm inch 0% 0% 0% 0% 0% 0% 70% 80% 90% 0 / / Note: Sizes DN00 and above available on request. BUF_V_0078.
XDV-UDH UNI-DIRECTIONAL KNIFE GATE VALVES
UNI-DIRECTIONL KNIFE GTE VLVES FETURES Special L shaped replaceable seat. Roller bearings in SS housing on all all sizes. Fully lugged to suit S0 CL. Stainless steel stem protection tube included. Gearbox
More informationData is only for informational purpose. All specifications are subject to change without notice.
MV Data is only for informational purpose. All specifications are subject to change without notice. 1 First in knife gate 2018-12-19 solutions issue 24 Knife gate valve MV Stafsjö s knife gate valve MV
More informationType. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
More informationWafer Type Butterfly Valve
Rev.B Wafer Type Butterfly Valve Type Summary Butterfly valve actuator type Actuator Type Description Rated Output Force Supply* Control/ Feedback Signal Running Time Weight kg TBV-50-X.V Proportional
More information1.7 Z 414-A LUG TYPE BUTTERFLY VALVE Z 414-A.
LUG TYPE BUTTERFLY VALVE -A TECHNICAL DATA Nominal diameter: da ( ) - da ( ) (SDR ) da ( ) - da ( ) (SDR (SDR / SDR, / SDR ) Face-to-face: EN 55 Series (DIN 32 T3 K1) ISO 5 Series API 09 Table 1 BS 55
More informationMultiPort Ball Valves
Subsidiary of Bray International, Inc. Subsidiary of BRY INTERNTIONL, Inc. & WY Multi-Port Valves Full Port/Standard Port / - Ball Valves SME CL 0/00 (PN0 to PN 0) 00/000 psi WOG ( to 9 Bar) MultiPort
More informationStainless steel hygienic butterfly valves. F250 for imperial tubing. F251 for metric tubing.
Stainless steel hygienic butterfly valves. F for imperial tubing. F for metric tubing. Features Keystone technology. Quarter turn operation. Isolation or regulation control. Equal percentage characteristics.
More informationFull lift safety valve with spring loading. (AIT)
Full lift safety valve with spring loading. (IT) Model 95 Model 95 Model 995 Model 9 EN P ES Model 95 S P ES Model 95 S P ES S P ES S Model 995 Model 9 The valve works as an automatic pressure releasing
More informationType 57 Butterfly Valve
Standard Features (Sizes -/2" ") Standard model (-/2" ") has PV Body and Disc for superior chemical resistance and elevated temperature capabilities 3/3 stainless steel shaft has full engagement over the
More information1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA
UG TYPE BUTTERFY VAVE Z 04-A ug type butterfly valve with threaded holes. This type enables the one-sided lugging of pipes. TECNICA DATA Nominal diameter: 00 ( only PN0/) Face-to-face: EN Series (DIN T
More informationRSK. Wafer Type Check Valve. Construction. Features. Advantages
Wafer Type Check Valve Construction The GEMÜ wafer type check valve is available in plastic or metal and the body, disc and seal can be chosen from various materials. The valve is clamped between two flanges
More informationFxM. ISO7/1 thread, EN331 standard PN40~PN25(5MOP/20MOP) Size:1/4 ~2
BA VAVE - EVER ANDE F/F Model: E0 Advantica british gas, wras, en approved ball valves yellow stainless steel lever handle; FxF ISO/ thread, EN standard PN0~PN(MOP/0MOP) Size:/ ~ According to EN standard.
More informationSTAF, STAF-SG, STAF-R, STAG
STAF, STAFSG, STAFR, STAG Balancing valves 0. Technical description Applications: STAF, STAFSG, STAG: Heating and cooling systems STAFR: Heating and cooling systems Tapwater systems Functions: Balancing
More informationElectric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT
1/4 to 2 NPT Features Direct mount ISO5211 Full Port 316 stainless steel ball valve 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve position indicator Rugged aluminum Type 4X weatherproof
More informationWAFER TYPE BUTTERFLY VALVE Z 011-A
WAFER TYPE BUTTERFY VAVE Z 0-A TECNICA DATA Nominal diameter: Face-to-face: EN Series (DIN 0 T3 ) ISO Series API 0 Table BS Series Flange accommodation: DIN PN // ANSI B., Class MSS SP Class AWWA C AS
More informationPL-0111-BFV Butterfly Valves
PL-0111-BFV Butterfly Valves Prices Effective January 10, 2011 Wafer and Lug Style, Cast Iron and PVC Up to 200 WOG One and Two Piece Valve Stem Nickel Plated Ductile Iron, Aluminum, Bronze and 316 Stainless
More informationVonk Choke Valve. Flow Control. Features and benefits. Product overview. General applications. Technical data. Model CHV (Angle Body)
Vonk hoke Valve Model HV (ngle ody) Flow ontrol Vonk choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability
More informationBalancing valve PN 16 and PN 25 DN
STAF, STAF-SG Balancing valve PN and PN DN 0-00 Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE A flanged, cast iron (STAF) and ductile iron (STAF-SG) balancing
More informationAZURN Company Sluice Gate Dimensions
Rodney Hunt AZURN Company Sluice Gate Dimensions Presented in this brochure are the actual dimensions for sluice gates that are suitable for the design head listed. The sluice gates listed are not the
More informationNEOTECHA. PFA lined Ball Valves - Models SNB and SNC
NEOTECHA PFA lined stainless steel ball valve with short face to face and well proven trunnion mounted design for use in pharmaceutical and bio-engineering industries Features PFA lining offers highest
More informationItem 620A Multi-Way Sanitary Ball Valve
R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel
More informationTrue Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe
True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe SERIES Features Pressure rated 232 PSI (16 Bar) at 73 F (23 C) Full Port design for unrestricted flow Energized PTFE ball
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page
More information3-PORT SEAT VALVES PN16 WITH EXTERNALLY THREADED CONNECTIONS STAZ-16, STBZ-16, STCZ-53 DATASHEET
-PORT SEAT VALVES PN WITH EXTERNALLY THREADED CONNECTIONS STAZ-, STBZ-, STCZ- DATASHEET In small or medium-sized heating, ventilating and air conditioning plants as a control or safety shutoff valve. For
More information1.1 Z 011-A WAFER TYPE BUTTERFLY VALVE Z 011-A TECHNICAL DATA
WAFER TYPE BUTTERFY VAVE Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter: (
More informationSMG VALVES A Unit of SOUTHERN MANUFACTURING GROUP, Inc. BULLETIN August 2009 PERMASEAL PLUG VALVES TECHNICAL SPECIFICATIONS
SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. ULLETIN 13.01-02 ugust 2009 PERMSEL PLU VLVES TEHNIL SPEIITIONS SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. Materials of onstruction ody & over arbon Steel
More informationC200 VALVE WITH UM ELECTRIC ACTUATOR
FEATURES The C200+UM Ball-valves guarantee the function of automatic shut-off of pipes made of PVC-U, PEHD, PP or PVDF. This PN10/16 pressure class valve is used to isolate low-pressure water, acid or
More informationPressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI Pressure reducing valve ARI-PREDU - ANSI Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling
More information1.4 F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A TECHNICAL DATA
DOUBE FANGED BUTTERFY VAVE F 01-A TS-version (through-going shaft) TECNICA DATA Nominal diameter: 0 1 Face-to-face: EN Series ISO Series API 0 Table C BS 1 short NF E -30.1 Flange accommodation: DIN 01
More informationWAFER PATTERN BUTTERFLY TYP Z 011-A
WAFER PATTERN BUTTERFY TYP Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter:
More information711, 728, 751. Ball Valve, Stainless steel Multi-port
Ball Valve, Stainless steel Multi-port Construction GEMÜ 711, 728 and 751 are 2/2-way stainless steel ball valves with top flange EN ISO 5211 in sizes 1/4 to 2 (DN 8 to DN 50). The top flange enables both
More informationMark 78 Series . JORDANVALVE. Globe Style Control Valve. CRN Registration Number Available
Mark 78 Series CRN Registration Number Available Globe Style Control Valve The Mark 78 pneumatic control valve is designed for accurate performance and simplified maintenance. This versatile product can
More information700Z JIS. 10K Aluminum Butterfly Valve. Evolution of Long Sellers Sealing performance and Durability Improved! 40 to 300mm
0K Aluminum Butterfly Valve 0Z Valve nominal size 0 to 00mm Max.working pressure MPa Working temperature range C JIS JIS B 0 Compliant (This product conforms to General Specifications for Machinery and
More information2-PORT SEAT VALVES PN16 WITH FLANGED CONNECTIONS STAZ-16, STBZ-16, STCZ-52 DATASHEET
-PORT SEAT VALVES PN WITH FLANGED CONNECTIONS STAZ-, STBZ-, STCZ- DATASHEET In boiler, district heating and refrigeration plants, cooling towers, heating groups, in ventilation and air-handling units as
More informationGEMÜ 723 Motorized ball valve
Motorized ball valve Features High flow rates Low weight Choice of various body materials and connection types Available as shut off or control valve / and /-way versions available The / and/or /-way ball
More informationBall valve Metal. Sectional view. * see information on working medium on page PED/97/23/EC Category III Module H TA-LUFT
all valve Metal Construction GEMÜ is a 2/2-way stainless steel ball valve with top flange EN ISO 5211 in sizes DN 15 to 100. It has a low maintenance electric actuator with a powerful DC motor. The reduction
More informationimag 4700 Series FLANGED MAGMETER
p r (Remote Display) RIGHT METER FOR Water & Wastewater Treatment Municipal Pump skids Pump stations Packaged plants Filtration systems Reclaimed water Hydraulic fracturing -300 Features Easy setup Minimal
More informationAVK Butterfly valves series 756
1 Valve with gearbox [IP 67] and hand wheel Standard epoxy/epoxy PN 10/16 butterfly valves including gearbox and handwheel for installation in chamber please order: Integral seat Stainless steel seat 756
More informationM3P..G/A, M3P..F/A Modulating control valves (PN16) for chilled and hot water systems
MP..G/A, MP..F/A Modulating control valves (PN) for chilled and hot water systems Three-way or straight-through valves with magnetic actuators for modulating control of chilled and hot water systems. Short
More informationSHORT PATTERN FLANGE BALL VALVES 5000 SERIES
SHORT PATTERN FLANGE BALL VALVES 5000 SERIES Jarecki 5000 Series metal seated ball valves with the Phantom Port incorporate the most innovative design in ball valves today. Proven in the field, they provide
More informationFEATURES Easy setup Minimal straight pipe Mounted or remote rate & total Tamper-evident seal NSF-61 approved IP68 rated
s Flow Meters & Controls ECO FLOMAG i M A G S e r i e s o M o vi n g P a r t N NSF Certified to NSF/ANSI 61 FEATURES Easy setup Minimal straight pipe Mounted or remote rate & total Tamper-evident seal
More informationChoke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE1958 MDA / MDAS Choke Valves Unique. Precise. Quality. Reliable. MDA / MDAS SERIES CHOKE VALVES FEATURES enefits T aylor Valve MDA / MDAS Series Chokes are made with wear resistant material to extend
More informationVAREC 2010B/2020B PRESSURE AND VACUUM RELIEF VALVES
VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Weight-loaded relief valves that protect tanks from damage or deformation, minimize emissions to the environment and loss of product due to evaporation FEATURES
More informationSELECTOR SWITCH TYPE 01
DT SHEET SELECTOR SWITCH TYPE 0 MIN FETURES COMPCT, UP TO POSITIONS '000 switching cycles with up to Ncm switching torque Gold plated contacts: micron Robust metal bushing and shaft Operating temperature:
More information700G Wafer 704G Full lugged 705G Semi lugged
0 Series Rubber Seated Butterfly Valves for general use 0G Wafer Full lugged Semi lugged ock ever Worm Gear Center Handle neumatic Cylinder Motorized Features and Benefits Rib disc The stainless steel
More informationAG3000 SERIES FLANGED MAGMETER
SERIES p Precision Flow Measurement An ONICON Brand RIGHT METER FOR Irrigation Chemigation Agricultural automation Well usage monitoring Dairy lagoons Features 5 5-YEAR WARRANTY LONGEST IN THE IRRIGATION
More informationL P Linn-Pumpen GmbH. Electric-gear-pumps series FKM
Electric-gear-pumps series FKM Construction Self-priming electric-gear-pumps, bellhousing with foot-flange, pump-casing in cast iron. Gear-pumps series FKM with motor-power up to 1,5. Suction- and -ports
More informationBall valve C 200 PROP / C 200 DOS
Ball valve C 00 PROP / C 00 DOS Additional options on request Silicone free www.asv-stuebbe.com/products/instrumentation PVC-U PP PVDF Characteristics C 00 PROP Proportional ball valve based on the C 00
More information334A. High Performance Butterfly Valves to suit API standard 150lb/300lb Rating. Double offset geometry. 50 to 600mm
High Performance Butterfly Valves to suit API standard lb/00lb Rating A Valve nominal size to 00mm Max.working pressure MPa Working temperature range 0 0 Cast steel Stainless steel.9 5. 9 FS Fire safe
More informationCast Iron Valves. JIS 5K/10K, Class 125
Valves JIS K/K, Class STNDRD PRODUCTION RNGE Valve Type Nominal Pressure Fig. No. Construction (Note) Page Gate valves JIS K JIS K JIS K JIS K JIS K K Class Class Class Class FCM FCL FCLS FCLU FCWI FCHI
More information304A Wafer 304Q Lugged
High erformance Butterfly Valves to Suit I Standard 0 lb Rating om isco R 0 Wafer 0Q ugged 0mm to 00mm 0mm to mm ock ever Worm Gear neumatic Cylinder Motorized Features and Benefits Unique stopper structure
More informationBaumann Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
More informationTaylor Valve Technology, Inc
MULTI-ORIFICE VALVE MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JUL0-TVT-OKC SERIES
More informationMark 79/79MX Series. Control Valves Mark 79/79MX Three-Way Control Valves. Three-Way Control Valves. Operation. Features
Mark 79/79MX Series Three-Way Control Valves The Mark 79 is a pneumatic 3-way control valve for use in either bypass or mixing service. The MK79 utilizes the unique sliding gate trim design to provide
More informationModel 685 Model 885. Model 985
Full lift safety valve with spring loading. (AIT) Model 5 Model 5 Model 95 ASME SI Units EP AP ES AS EP AP ES Model 5 Model 5 AS EP AP ES AS Model 95 The valve works as an automatic pressure releasing
More informationNDP-50 Series Specifications
NDP-50 Series Specifications Port Dimensions Intake & discharge connection: Polypropylene (PPG) 2 50mm DIN DN80 PN10 Kynar (PVDF) 2 50mm DIN DN80 PN10 Aluminum (ADC-12) 2 50mm DIN DN80 PN10 (with tapped
More informationSpare Parts. Small Single Seat Valve SP70860-GB
Spare Parts Small Single Seat Valve SP70860-GB1 2003-09 Stop Valve 12.7-19 mm 2 Reg.: 2003-05 Intro.: 2003-05 Stop Valve 12.7-19 mm Pos. Qty. Denomination 12.7 mm 19 mm Actuator, complete... 9612-9404-01
More informationChoke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE198 MDI / MDIS Choke Valves Unique. Precise. Quality. Reliable. MDI / MDIS SERIES CHOKE VALVES FEATURES Benefits T aylor Valve MDI / MDIS Series Chokes are made with wear resistant material to extend
More informationVonk Choke Valve. Flow Control. Features and benefits. Product overview. Technical data. General applications. Model YCV (Y-Type body)
Flow Control Vonk choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability in the most challenging applications.
More informationimag-series Flanged Magmeter
s Flow Meters & Controls imag-series o M o vi n g P a r t N FEATURES Easy setup Minimal straight pipe Mounted or remote rate & total Tamper-evident seal NSF-61 approved (3 only) IP68 rated 9001:2008 ISO
More information8 Submersible Motors Standard
Applications These motors are built for dependable operation in vertical 8 diameter or larger water wells. Basic Features Double Flanged NEMA mounting design Stainless steel splined shaft StatorShield
More informationButterfly Control Valve. DMK/6 Series
Butterfly Control Valve DMK/6 Series UL Listed for US and Canada UL 842 and ULc C125 & C842 File # MH 18741 Models DMK 707/6 (3/4 NPT) DMK 710/6 (1 NPT) DMK 712/6 (1 1/4 NPT) DMK 715/6 (1 1/2 NPT) DMK
More informationPipe fittings and flanges, sockets for bayonet locks
Data Sheet 909750 (909725) Page 1/7 Pipe fittings and flanges, sockets for bayonet locks for temperatures up to 600 C for different fitting lengths simple installation and replacement pressure-tight sealing
More informationPerformance!Nxt Release
June 04, 2018 Performance!Nxt Release 12.7220 Flowserve is pleased to announce the latest release of Performance!Nxt (P!Nxt), the industry's foremost Control Valve Sizing, Selection and Project Management
More informationFisher 657 and 667 Size 30i - 76i Diaphragm Actuators
657 and 667 Size 30i - 76i Product Bulletin August 2016 Fisher 657 and 667 Size 30i - 76i Diaphragm Actuators Fisher 657 and 667, size 30i to 76i, spring-opposed diaphragm actuators position the valve
More informationIntroduction. Available materials. Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
VALVES & CONTROLS VAREC 00B/00B The Varec 00B/00B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction 00B
More informationDigital electropneumatic Positioner for the integrated mounting on process control valves
Digital electropneumatic Positioner for the integrated mounting on process control valves Type 8696 can be combined with Digital smart positioner Automatic teach function Contact-free position sensor Compact
More informationVAREC 221 SERIES EMERGENCY PRESSURE RELIEF MANWAY COVERS
VAREC SERIES EMERGENCY PRESSURE RELIEF MANWAY COVERS The Series is designed to provide emergency venting of low pressure storage tanks and vessels FEATURES P PV Available in emergency pressure only and
More informationZones 1&2; 21&22. Distribution Boxes and Empty Enclosures. Empty Enclosures. BXT Series Explosion-proof Enclosures (Ex d IIB) Catalogue number logic
istriution oxes nd XT Series Explosion-proof Enclosures (Ex d II) Explosion protection to -ENELE -IE -NE n e used in Zone nd Zone Zone nd Zone lss I, Zone nd Zone lss I, ivision, Groups, Flmeproof enclosure
More informationselection of special materials is available to handle almost any fluid.
For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications
More informationFEATURES Easy setup Minimal straight pipe Mounted or remote rate & total Tamper-evident seal NSF-61 approved IP68 rated
s Flow Meters & Controls ECO FLOMAG imag Series o M o vi n g P a r t N NSF Certified to NSF/ANSI 61 FEATURES Easy setup Minimal straight pipe Mounted or remote rate & total Tamper-evident seal NSF-61 approved
More informationFusion of electronic pressure sensor and analogue display.
Fusion of electronic pressure sensor and analogue display. Pressure sensors www.ifm.com/gb/pg fluid sensors and diagnostic systems position sensors and object recognition bus, identification and control
More informationGas Pressure Regulator HON
Gas Pressure Regulator HON 0 0.0 OPERATING AND MAINTENANCE INSTRUCTIONS/ SPARE PARTS EDITION 0/07 Serving the Gas Industry Worldwide Contents page. General Remarks 3. Safety Instructions 3. Special Operating
More informationIndustrial Electric Actuators AC and DC Voltages Nm/ inch lbs
Industrial Electric Actuators AC and DC Voltages 30-200Nm/265-1770 inch lbs Features Quarter turn (90 ) operation with mechanical travel stops Type 4X/IP67 weatherproof aluminum alloy enclosure Highly
More informationOperating pressure (bar) kv factor (m 3 /h) *3)
/ way poppet valves (stainless steel) electromagnetic actuated, directly controlled G /8, G /4 or /4 NPT Working from 0 bar up Assembled free of oil and grease Suited for fine vacuum down to,33 0 - mbar
More informationChoke Valves SINCE1958. Unique. Precise. Quality. Reliable.
SINCE95 MC SERIES Choke Valves Unique. Precise. Quality. Reliable. MOV Valve Principle of Operation Taylor Valve Technology Multi-Orifice Valve Design Principle Provides Precision Control. The two adjacent
More informationDN100 (4") - DN500 (20") Hot Tappings
DN00 (4") - DN500 (20") Hot Tappings TONISCO B40 Hot Tapping Machine is versatile and easy to operate. It has a full range capability of setting valves DN00 DN500 by completing it with proper adapters.
More informationMAG. ECO FLO imag Series NSF FEATURES
Flow Meters & Controls MAG ECO FLO imag Series M o vi n g P s N o rt w U NSF o n Easy setup Minimal straight pipe Mounted or remote rate & total 4-2mA output available Tamper-evident seal NSF-61 approved
More informationDN40 (1 1/2") - DN200 (8") Hot Tappings
DN40 ( /2") - DN200 (8") Hot Tappings TONISCO B30 Hot Tapping Machine is versatile and easy to operate. It has a full range capability of setting valves DN40 DN200 by completing it with proper adapters.
More informationEnviZion TM Hygienic Diaphragm Valve
EnviZion TM Hygienic Diaphragm Valve Experience the Future with EnviZion The Biopharm industry relies on hygienic diaphragm valves for demanding process applications due to their unique balance of clean-ability,
More informationEasy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
More informationSV81H Safety and Relief Valve
Page TID BR Rev.0 UV SV8H Safety Relief Valve Description The SV8H have fied blowdown.no blowdown adjustment required when setting or testing the valve.it is designed for short blowdown on all medias.
More informationSensor Wafer MUT 1000 EL DS120-1-ENG
Electromagnetic Flowmeter dg: www.oryana.com.ar NEW Sensor Wafer MUT 1 EL DS12-1-ENG 1 / 1 Sensor MUT 1 EL MUT 1 EL sensors represent the state of the art of EUROMAG INTERNATIONAL production for water
More informationRoller Rail Systems. (Additional roller runner blocks SNS R1822, SLS R1823, FXS R1854) R310EN 2315 ( ) The Drive & Control Company
Roller Rail Systems (Additional roller runner blocks SNS R18, SLS R183, FXS R1854) R31EN 315 (1.9) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems
More information98 Series Back Pressure. Valve Link. Features. Fisher Controls. August 1993 Bulletin 71.4:98
Series Back Pressure and Type Relief VL000 Valves FIELDVUE Valve Link Fisher Controls August Bulletin.: The Series (figure ) is used for back pressure or relief applications in liquid, gas, air, and steam
More informationM.R.P. Dt
M.R.P LIST Dt. 13.09.2013 "ZOLOTO " Bronze Globe Valve (Screwed). 1001. 8mm 10mm 15mm 20mm 25mm 32mm 40mm 50mm 65mm 80mm 100mm 416.00 416.00 416.00 601.00 791.00 1305.00 1723.00 2513.00 4308.00 7174.00
More informationSTEEL NIPPLES BLACK BRASS & GALVANIZED FITTINGSSCH 40
1/8" DIMETER STEEL NIPPLES BLCK BRSS & GLVNIZED SCH 40 Length Box/Case pprox. Galv 56-001 1.89 X Close (3/4") 5/600 0.02 57-001 1.34 56-002 1.95 x 1-1/2" 5/600 0.03 57-002 1.51 56-003 2.19 x 2" 5/600 0.04
More informationTaylor Valve Technology, Inc
MULTI-ORIFICE VALVE Taylor Valve MD SERIES PRODUCTION CHOKES Gas Lift Water Injection Enhanced Oil Recovery Throttling Valve High DP Valve Motor Operated Valve Manual and Automated Applications JAN00-TVT-OKC
More informationimag 4700 Series FLANGED MAGMETER
r (Remote Display) RIGHT METER FOR Water & Wastewater Treatment Municipal Pump skids Pump stations Packaged plants Filtration systems Reclaimed water Hydraulic fracturing Features Easy setup Minimal straight
More informationFusion of electronic pressure sensor and analogue display.
Fusion of electronic pressure sensor and analogue display. Pressure sensors www.ifm.com/gb/pg fluid sensors and diagnostic systems position sensors and object recognition bus, identification and control
More informationTECHNICAL BULLETIN. Kämmer ColdFlow A Low temperature Control Valve. Experience In Motion FCD KMENTB /17
TECHNICAL BULLETIN Kämmer ColdFlow - 041000A Low temperature Control Valve FCD KMENTB4114-00 11/17 Experience In Motion Index 1. Introduction 2. Features and Benefits 3. Specification 4. Trim Design 5.
More informationDigital electropneumatic Positioner SideControl
Digital electropneumatic Positioner SideControl Type 8791 BASIC can be combined with Compact and robust design Easy to start using tune function Dynamic positioning system with no air consumption in controlled
More informationWater Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply Maintenance Products Section WO 04 Last updated January 2007 CONTENTS SPECIFICATIONS A WO 04-S1A MULTI-PURPOSE UNRESTRAINED
More information~. LOW FLOW Series. ~ a division of Jordan Valve. ~ h9.y.\:.~~q~ Fractional Flow Controls Valves HEAVY DUTY CONTROL VALVES.
~. LOW FLOW 8000 Series Fractional Flow Controls Valves HEVY DUTY CONTROL VLVES The Mark 8000 Series is a group of heavy-duty control valves specifically designed for process applications requiring full
More informationMPreC - Pressure Relief Device Order specification sheet
- Pressure Relief Device Order specification sheet -Series LARGE MESSKO PRESSURE RELIEF DEVICE Complete the Order-N o by choosing the specific add-on s: e.g.: LMPRD 685-08-22-N01-00 Order-N o : Parameter
More informationCHECK VALVE CH-1601A (EN)
CH-1A (EN) ABOUT US FBV Inc. is an ISO 001 certified company specializing in manufacturing industrial valves including ball valves, gate valves, globe valves, check valves, plug valves and butterfly valves
More informationMotorised Butterfly Valve DMK Nominal Diameter Rp 3/4 - Rp 2
Motorised Butterfly Valve DMK Nominal Diameter Rp / - Rp.0 Printed in Germany Rösler Druck Edition 0.0 Nr. 9 77 Technical description The DUNGS DMK motorised butterfly valve is an actuator without zero
More informationPSI COMPAKT SEAL PRESSURE TIGHT UP TO 5 BAR SPECIAL VERSIONS FOR DIFFERENT PIPE SYSTEMS STAINLESS STEEL PRESSURE PLATES AS STANDARD
PSI COMPAKT SEAL PRESSURE TIGHT UP TO 5 BAR SPECIAL VERSIONS FOR DIFFERENT PIPE SYSTEMS STAINLESS STEEL PRESSURE PLATES AS STANDARD ALL SPLIT VERSIONS OF OUR STANDARD COMPAKT SEALS ARE FOLDABLE WWW.PSI-PRODUCTS.COM
More informationRadiator Valves. Building Technologies HVAC Products. NF norm, for 2-pipe heating systems
6 EN - Straight valves VDN Angle valves VEN Reverse angle valves VUN Radiator Valves NF norm, for -pipe heating systems VDN VEN VUN Valve bodies made of brass, mat nickel-plated DN, DN and DN (VDN, VEN
More informationMAXON SMARTLINK MRV. Intelligent MICRO-RATIO Valve Series. Technical Catalog
MAXON SMARTLINK MRV Intelligent MICRO-RATIO Valve Series Technical Catalog TABLE OF CONTENTS Product description... 1 Features and benefits... 1 Applications... 2 Approvals... 2 Model numbers... 3 Butterfly
More information