ILP-T. Taxiway Lighting. 8" Uni- or Bidirectional High-Intensity Inset Light. Compliance with Standards. Technical Characteristics. Uses.

Size: px

Start display at page:

Download "ILP-T. Taxiway Lighting. 8" Uni- or Bidirectional High-Intensity Inset Light. Compliance with Standards. Technical Characteristics. Uses."

Lenard Byrd
5 years ago
Views:

8" Uni- or Bidirectional High-Intensity Inset Light Compliance with Standards ICAO: Annex 14 Volume I, 5th Edition 2009, Paragraphs 5.3.

- Identical lamp performance: each lamp change with a new reflector. - High optical stability: no internal adjustment needed as the prefocus lamp is always correctly positioned.

1 8" Uni- or Bidirectional High-Intensity Inset Light Compliance with Standards ICAO: Annex 14 Volume I, 5th Edition 2009, Paragraphs and for use in CAT I, II and III NATO: STANAG 3316 French STNA CAP 168 BS 3224 Excellent light performances due to the reflector lamp: - Improved luminous efficacy. - Identical lamp performance: each lamp change with a new reflector. - High optical stability: no internal adjustment needed as the prefocus lamp is always correctly positioned. Possibility of separate lighting for bi-directional lights. Quick and easy maintenance: minimal components for disassembly/assembly. Non-sealed prisms for easy replacement Valve for water-tightness testing. Many common components with other lights in the same range. Easy handling due to small size and light weight. Technical Characteristics Component Lamp: Description 40W 6.6A pre-focused halogen lamp with a dichroic reflector. Lamp life >1500h at 6.6A. Uses is a 8 uni- or bidirectional high-intensity inset light. Taxiway Centre Line Rapid Exit Taxiway Stopbar Clearance Bars Apron lead-in Features Low power consumption: - 40 Watts (one lamp version) Watts (two lamps version). Lamp life greater than 1,500 hours at 6.6 Amps. Low projection: 6.35 mm (1/4 ). Small diameter: 203 mm (8 ). Installation in 100mm shallow base (short cover version). Power Supply: Photometry: Color: Finish: Fixing on support: Projection: 6.35 mm / 1/4 External diameter: Net Weight: The fitting is delivered equipped of one or two (option of bi-directional fittings) two-pole secondary FAA plug(s) to connect it to one (or two) isolating transformer(s). Distribution and homogeneity comply with ICAO and FAA recommendations. Green, Yellow and Red dichroic filters. Chromaticity complies with ICAO and FAA. All external parts are made of anodized tempered aluminum alloy casting. All fixings and fastenings are stainless steel. By two M10 studs and nuts (supplied with the base or the adapter ring). 203 mm / kg DS-0061_v1.0 1

2 Packing Data Designation Volume Dimensions mm Weight m 3 kg B U Fitting with one connector 0, Fitting with two connectors 0, Design Components 1. Body 2. Silicone prism gasket 3. Non-sealed prism 4. Prism support 5. Dichroic filter with gasket 6. Optical support 7. Lamp support 8. Pre-focused halogen dichroic reflector lamp 40W at 6.6A 9. Lamp spring 10. Optical support screws 11. Cover gasket 12. Obturator 13. Cable sub-assembly for short cover 14. Film disk cut out * 15. Film disk cut out holder * 16. Cut out relay * 17. Cable terminal 18. Valve for water tightness tests 19. Cover screw 20. Cable subassembly for long cover 21. Complete short cover 22. Complete long cover Note: The complete fitting is delivered with water tightness O ring gasket for a THORN AFL 8 shallow base. An asterisk * denotes options when the fitting is equipped with a cutout device (relay or film disk), a long cover must be used and the minimum depth of the base must be 134 mm. A long cover is mandatory with options. SHORT COVER LONG COVER DS-0061_v1.0 2

3 Order Codes The table below is a guide to order codes for a fitting with available component parts. Ordering Code Components ILP T B N 1X40W GY LC 2C FD Function Taxiway T Type of fitting Unidirectional U Bi-directional B Type of Light beam(s) Narrow beam straight section N beam for straight section W Curved sections C Deviated on the right (for unidirectional) R Deviated on the left (for bi-directional) L Number of lamps 1 lamp 1 2 lamps 2 Lamp power (Watts) 40W Colors Green G Yellow Y Red R Bi-directional GY Note: Two colors for bi-directional. Cover Long cover LC Short cover SC Connection to isolating transformer 1 connector 1C 2 connectors 2C Option Film disk FD Relay REL Additional 8 shallow base and Adapter ring For more information, contact ADB SAFEGATE or see DS-0061_v1.0 3

4 Fitting Types Function Direction Color(s) Lamp(s) Section Beam Fitting Taxiway center line Bi-directional Green and Green One Straight Narrow BN +1X40W Rapid exit taxiway center line BW +1X40W Curved Curved BC +1X40W Two Straight Narrow BN +2X40W BW +2X40W Curved Curved BC +2X40W Unidirectional Green One Straight Narrow UN +1X40W UW +1X40W Curved Right UR +1X40W Left UL +1X40W Bi-directional Green and Green One Straight Narrow BN +1X40W or Green and Yellow BW +1X40W Curved Curved BC +1X40W Two Straight Narrow BN +2X40W BW +2X40W Curved Curved BC +2X40W Unidirectional Green or Yellow One Straight Narrow UN +1X40W UW +1X40W Curved Right UR +1X40W Left UL +1X40W Stop bar Unidirectional Red One Straight Narrow UN +1X40W UW +1X40W Clearance bar Unidirectional Yellow One Straight Narrow UN +1X40W UW +1X40W Apron Lead-in Unidirectional Yellow One Straight Narrow UN +1X40W UW +1X40W Curved Right UR +1X40W Left UL +1X40W DS-0061_v1.0 4

5 Installation Options Description On 8 shallow base 100 mm deep with side access (see FIG 1) or with bottom access (see FIG 2). Shallow Cover. On 8 shallow base 134 mm deep with side access (see FIG 3) or with bottom access (see FIG 4). Long Cover. On FAA L-868B deep base by means of 12 / 8 adapter ring (see FIG 5). On SR8 seating ring by means of SR8/8 adapter ring. Note: When the fitting is equipped with a cut-out device (relay or film disk), a long cover must be used and the minimum depth of the base must be 134 mm. For more information, see the Design section*. Image examples DS-0061_v1.0 5

Photometric This section includes photometric examples of different light configurations.

2 Yellow Light Narrow Beam for Straight Sections I average: 380 cd I max / I min: 1.

7 Green Light Beam for Straight Sections I average : 315 cd I max / I min: 2.

6 Photometric This section includes photometric examples of different light configurations. Green Light Narrow Beam for Straight Sections I average: 340 cd I max / I min: 2.2 Yellow Light Narrow Beam for Straight Sections I average: 380 cd I max / I min: 1.8 Red Light Narrow Beam for Straight Sections I average: 270 cd I max / I min: 1.7 Green Light Beam for Straight Sections I average : 315 cd I max / I min: 2.3 Yellow Light Beam for Straight Sections I average: 270 cd I max / I min: 1.7 Red Light Beam for Straight Sections I average: 260 cd I max / I min: 2.6 DS-0061_v1.0 6

7 Green Light Beam Curved for Curved Sections I average: 110 cd I max / I min: 2.8 Yellow Light Beam for Straight Sections I average: 130 cd I max / I min: 2.8 Light Beam Types fittings are equipped for functions with different prisms to achieve the different light beams: Narrow (A), Large (B). Different types of light beams (A, B, C) corresponding to the different types of fitting (N, W, C) are shown below. Note: All descriptions and photometric characteristics in this publication present only general particulars and shall not form part of any contract. The right is reserved to change them without prior notification. Note: When installing fittings for a curved section in a fitting support, such as a shallow base, the top of the fitting is marked with an arrow which must always point to the centre of the curve. B U Product specifications may be subject to change, and specifications listed here are not binding. Confirm current specifications at time of order. DS-0061_v1.0 7

DTS/DTC/DFS TAXIWAY LIGHTING. LED Taxiway Centerline, Stop Bar and Holding Position Inset Light. Compliance with Standards. Uses.

DTS/DTC/DFS TAXIWAY LIGHTING. LED Taxiway Centerline, Stop Bar and Holding Position Inset Light. Compliance with Standards. Uses. LED Taxiway Centerline, Stop Bar and Holding Position Inset Light Compliance with Standards ICAO: Annex 14, Vol. 1, par. 5.3.17, 5.3.20 and 5.3.21 FAA: L 852(L) Series AC 150/534546 and FAA Engineering