IDC for 50mil(1.27mm) Falt Cable with One-touch Locking Ejector System 50mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41

Transcription

1 IDC for mil(1.27mm) Falt Cable with One-touch Locking Ejector System mil(1.27mm) PITCH 2 PIECE CONNECTOR 8822E SERIES C-41

2 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil) FC FEATURES IDC for 1.27mm (mil) flat cable (#28 AWG) Highly reliable straight beam contact design Low insertion and withdrawal force Easy to operate One-Touch locking ejector system Can be used with MIL-STD type IDC connectors (KEL 6100, 6200, 6200S, 6230 Series for example) 13 sizes, from 20 to 100 pins RoHS compliance ORDER CODE 88 E F F : RoHS Compliance Plating of contact area Omit : Au 0.05 m (Standard) D : Au 0.25 m (Upon request) Contact tail style (Plug only) S : Straight L : Right angle Contact name 170 : Plug 171 : Receptacle Number of contacts 020 : 20 pin 026 : 26 pin 030 : 30 pin 032 : 32 pin 034 : 34 pin 036 : 36 pin 040 : 40 pin 0 : pin 052 : 52 pin 060 : 60 pin 068 : 68 pin 080 : 80 pin Series name 100 : 100 pin 8822E : Receptacle 8830E : Plug, Without hooks 8831E : Plug, With hooks (Right angle only) SPECIFICATIONS Insulator : Glass-filled 66 Nylon (UL 94V-0), Black Contact : Copper alloy Plating : Contact area ; Gold over Nickel (1) Standard : 0.05 m min. Gold (2) Upon request : 0.25 m min. Gold IDC area ; 0.05 m min. Gold over Nickel (8822E) Terminal area ; 2 m min. Tin copper over Nickel (8830E/8831E) Current rating : 0.5A per contact Contact resistance : 30mΩ max. Dielectric withstanding voltage : 6V AC for 1 minute Insulation resistance : 1,000MΩ min. at 0V DC Operating temperature : -55 C to +85 C Recommended cable : #28 AWG (7/0.127), 1.27mm (mil) pitch, Flat ribbon cable 8822E Series locking ejector system The 8822E Series locking ejector system is a reversal of the MIL-STD design (KEL 6200 Series), the locking ejectors are integral to the cable connector. The ejectors are automatically locked by insertion in the Plug connector like the MIL-STD design. The latches remain within the connector outline to reduce the requirements for board space, are unlocked by applying inward pressure and can be operated with only one hand unlike the older designs. This design offers advantages for uses in today s high density electronic equipment. Way to insert Open the ejectors of 8822E Series and insert into 8830E/8831E Series until the latches fully engage. OPEN OPEN PUSH Way to withdrawal Press on both sides of the 8822E Series ejectors to release the connector from the Plug connector. PICK PICK OPEN OPEN CLOSE CLOSE (Locked position) C-42

3 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil) FC 8822E F (Receptacle, With locking ejector) Receptacle (IDC Type) Unit:mm(inch) X-X Cross Section B Latches must be open for mating OPEN JAPAN XXX OPEN Ref. 8.9 (0.3) 9.2(0.362) 7.3(0.287) 4.8(0.189) 6.6 (0.260) 8.4 (0.331) X9071 Polarity identification C A Ref. 3.2 (0.126) 3.65 (0.144) Ref. 0.4 (0.016) 12.7(0.0) Ref. 0.3(0.012) 21.6(0.8) 1.27(0.0) pitch 1 3 D X n "n" is number of contacts Product Table / Dimensions X No.of contacts Part Number A B C D E F (1.096) (0.702) (0.607) E F (1.246) (0.852) (0.757) E F (1.346) (0.952) (0.857) E F (1.396) (1.002) (0.907) E F (1.446) (1.052) (0.957) E F (1.496) (1.102) (1.007) E F (1.596) (1.202) (1.107) E F (1.846) (1.452) (1.357) E F (1.896) (1.2) (1.407) E F (2.096) (1.702) (1.607) E F (2.296) (1.902) (1.807) E F (2.596) (2.202) (2.107) E F (3.096) (2.702) (2.607) n (0.4) (0.600) (0.700) (0.7) (0.800) (0.8) (0.9) (1.200) (1.2) (1.4) (1.6) (1.9) (2.4) Packaging style Other Number of packaging C-43

4 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil) FC 8830E- -170S -F (Plug, With locking ejector) Plug (Straight Type) Unit:mm(inch) X-X Cross Section 1.75(0.069) 9.7(0.382) 1(0.039) 7.3(0.287) 3(0.118) 7(0.276) 6.6(0.260) 5(0.197) Ref (0.075) Ref (0.225) Ref (0.075) Ref. 0.4 (0.016) 3.65(0.144) 0.4(0.016) Ref (0.075) Polarity identification 1.27(0.0) pitch A B C D X 2-2.3( ) 3.7 (0.146) 3.3(0.130) 2-2.3±0.1 ( ±0.004) 3.7 (0.146)3.3(0.130) 2-2.3±0.1 ( ±0.004) Printed Circuit Board Layout (Component Side View) For 20,32,36,40,52,60,68,80,100 contacts Connector Outline n- 0.8 min.( min.) n ±0.05 (0.0±0.002) D±0.1(D±0.004) B±0.15(B±0.006) A For 26,30,34, contacts Connector Outline n- 0.8 min.( min.) n ± (0.0±0.002) D±0.1(D±0.004) B±0.15(B±0.006) A =Polarity identification Recommended PCB Thickness t=1.6±0.19(0.063±0.007) n is number of contacts. n n ±0.05 (0.075±0.002) 5.715±0.05 (0.225±0.002) 1.905±0.05 (0.075±0.002) 5.715±0.05 (0.225±0.002) Product Table / Dimensions X 3.8(0.1) 1.4(0.055) No.of contacts Part Number A B C D E S -F (1.096) (0.900) (0.623) E S -F (1.246) (1.0) (0.773) E S -F (1.346) (1.1) (0.873) E S -F (1.396) (1.200) (0.923) E S -F (1.446) (1.2) (0.973) E S -F (1.496) (1.300) (1.023) E S -F (1.596) (1.400) (1.123) E-0-170S -F (1.846) (1.6) (1.373) E S -F (1.896) (1.700) (1.423) E S -F (2.096) (1.900) (1.623) E S -F (2.296) (2.100) (1.823) E S -F (2.596) (2.400) (2.123) E S -F (3.096) (2.900) (2.623) (0.4) (0.600) (0.700) (0.7) (0.800) (0.8) (0.9) (1.200) (1.2) (1.4) (1.6) (1.9) (2.4) Packaging style Pipe Number of packaging C-44

5 8822E/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 1.27mm (mil) FC 8830E/8831E- -170L -F (Plug, With locking system) Plug (Right gle Type) Unit:mm(inch) 8830E- -170L -F X-X Cross Section 2.6(0.102) 8831E- -170L -F B 3(0.118) 4.6(0.181) 1.75(0.069) 7(0.276) 6.6(0.260) 5(0.197) 9.7(0.382) 7.7(0.303) 7.3(0.287) 2.905(0.114) Center of the 1(0.039) mounting hole 3(0.118) 2-2.3( ) Polarity identification Ref. 0.4(0.016) 3.65(0.144) Ref (0.075) Ref (0.075) Ref (0.225) 0.4(0.016) Ref (0.075) A B C D 1.27(0.0) pitch X X 2-2.3±0.1 ( ±0.004) 2-2.3±0.1 ( ±0.004) Printed Circuit Board Layout (Component Side View) 4.8(0.189) 1.7(0.067) 12.6 (0.496) 3.65 (0.144) 4.8(0.189) 1.7(0.067) 12.6 (0.496) For 20,32,36,40,52,60,68,80,100 contacts Connector Outline n- 0.8 min.( min.) n B±0.15(B±0.006) A For 26,30,34, contacts Connector Outline n- 0.8 min.( min.) B±0.15(B±0.006) A =Polarity identification Recommended PCB Thickness t=1.6±0.19(0.063±0.007) n is number of contacts (0.144) n n n ±0.05(0.0±0.002) D±0.1(D±0.004) 1.27±0.05(0.0±0.002) D±0.1(D±0.004) ±0.05 (0.075±0.002) ±0.05 (0.075±0.002) 3.81±0.05 (0.1±0.002) 8.5 max. (0.335 max.) PCB edge 1.905±0.05 (0.075±0.002) 3.81±0.05 (0.1±0.002) 1.905±0.05 (0.075±0.002) 8.5 max. (0.335 max.) PCB edge Product Table / Dimensions No.of contacts Part Number A B C D (1.096) (0.900) (0.623) (0.4) E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E-0-170L -F 8831E-0-170L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F (1.246) (1.346) (1.396) (1.446) (1.496) (1.596) (1.846) (1.896) (2.096) (2.296) (2.596) (3.096) (1.0) (1.1) (1.200) (1.2) (1.300) (1.400) (1.6) (1.700) (1.900) (2.100) (2.400) (2.900) (0.773) (0.873) (0.923) (0.973) (1.023) (1.123) (1.373) (1.423) (1.623) (1.823) (2.123) (2.623) (0.600) (0.700) (0.7) (0.800) (0.8) (0.9) (1.200) (1.2) (1.4) (1.6) (1.9) (2.4) Packaging style Pipe Number of packaging C-45

6 8822E/8830E/8831E SERIES CABLE ASSEMBLY / PIN ASSIGNMENT ORDER CODE 8822E F- -AA 8822E F- -AC 8822E 171 F (C) A1 b1 No.1 a1 A1 bn an No. of contacts 020 : 20 pin 026 : 26 pin 030 : 30 pin 032 : 32 pin 034 : 34 pin 036 : 36 pin 040 : 40 pin 0 : pin 052 : 52 pin 060 : 60 pin 068 : 68 pin 080 : 80 pin 100 : 100 pin Cable type Omit : Flat cable * S : Intermittent bonded cable T : Twist&Flat cable * Wiring code (AA, AC, BB, BD, AO, CO) Cable length (cm) L dimension (3cm min.) (Example: 008=8cm) F : RoHS Compliance bn Cable 1 an Cable 1 b1 a1 Contact name 171 Cable 2 Cable 2 Plating of contact area Omit : Au 0.05 m (Standard) D : Au 0.25 m (Upon request) Series name 8822E : One-touch locking ejector system 8822E F- -AO BB-wired products Omit : Twist type C : Through type A1 Cable 1 / No. 1 b1 A2 Cable 1 / No. 2 b2 Cable 1 / No. n bn Cable 2 / No. 1 a1 B2 Cable 2 / No. 2 a2 Cable 2 / No. n an A1 Cable 1 / No. 1 an A2 Cable 1 / No. 2 an-1 Cable 1 / No. n a1 Cable 2 / No. 1 bn B2 Cable 2 / No. 2 bn-1 Cable 2 / No. n b1 A1 No. 1 A1 a1 b1 A1 bn an Cable 2 Cable 1 No. n Cable 2 an Cable 1 bn Cable 1 Cable 2 b1 a1 A1 Cable 1 / No. 1 A2 Cable 1 / No. 2 Cable 1 / No. n Cable 2 / No. 1 B2 Cable 2 / No. 2 Cable 2 / No. n =Polarity identification A1( Polarity mark) a1( Polarity mark) b1 A2 B2 a2 b2 A1( Polarity mark) A2 B2 bn an bn-1 an-1 for 26, 30, 34, pins bn an bn-1 an E F- -CO A1 No. n -1 Cable for 20, 32, 36, 40, 52, 60, 68, 80, 100 pins -1 an-1 an for 26, 30, 34, pins bn-1 bn -1-1 Cable for 20, 32, 36, 40, 52, 60, 68, 80, 100 pins b2 b1 a2 a1( Polarity mark) Cable 2 Cable 1 No an-1 an (Component side view) bn-1 bn -1-1 for 26, 30, 34, pins (Component side view) A1 Cable 1 / No. n A2 Cable 1 / No. n-1 Cable 1 / No. 1 Cable 2 / No. n B2 Cable 2 / No. n-1 Cable 2 / No. 1 A1 b1 A2 b2 bn a1 B2 a2 an A1 an A2 an-1 a1 bn B2 bn-1 b1 * =Polarity identification =Polarity identification =Polarity identification Intermittent bonded and Twist&Flat cable have a restriction on cable length (L dimension) because they are terminated at the fused part. For AO and CO codes, orders are accepted in even quantities. Harness end has an extra cable of approximate 1mm beyond the connector edge. C-46

7 8822E/8830E/8831E SERIES CABLE ASSEMBLY / PIN ASSIGNMENT 8822E F- -BB 8822E F- -BB-C 8822E F- -BD (Twist type) (Twist type) L(cm) L(cm) L(cm) b1 A1 a1 A1 b1 a1 A1 bn an bn an bn an b1 a1 Cable 1 Cable 1 Cable 1 Cable 2 Cable 2 Cable 2 A1 Cable 1 / No. 1 a1 A2 Cable 1 / No. 2 a2 A1 Cable 1 / No. 1 a1 A2 Cable 1 / No. 2 a2 A1 Cable 1 / No. 1 a1 A2 Cable 1 / No. 2 a2 Cable 1 / No. n an Cable 2 / No. 1 b1 B2 Cable 2 / No. 2 b2 Cable 2 / No. n bn Cable 1 / No. n an Cable 2 / No. 1 b1 B2 Cable 2 / No. 2 b2 Cable 2 / No. n bn Cable 1 / No. n an Cable 2 / No. 1 b1 B2 Cable 2 / No. 2 b2 Cable 2 / No. n bn A1 a1 b1 A1 a1 b1 A1 bn an Cable 1 an bn an bn Cable 1 Cable 1 b1 a1 Cable 2 Cable 2 Cable 2 bn an A1( Polarity mark) a1( Polarity mark) b1 A2 B2 a2 b2 A1( Polarity mark) a1( Polarity mark) b1 A2 B2 a2 b2 A1( Polarity mark) A2 B2 bn-1 an-1 for 26, 30, 34, pins bn an bn-1 an F.C. for 20, 32, 36, 40, 52, 60, 68, 80, 100 pins an-1 an for 26, 30, 34, pins an-1 an bn-1 bn bn-1 bn F.C. for 20, 32, 36, 40, 52, 60, 68, 80, 100 pins an-1 an for 26, 30, 34, pins an-1 an bn-1 bn bn-1 bn -1-1 F.C. for 20, 32, 36, 40, 52, 60, 68, 80, 100 pins -1 b2 b1 for 26, 30, 34, pins -1 a2 a1( Polarity mark) * A1 a1 A2 a2 an b1 B2 b2 bn A1 a1 A2 a2 an b1 B2 b2 bn =Polarity identification =Polarity identification =Polarity identification Intermittent bonded and Twist&Flat cable have a restriction on cable length (L dimension) because they are terminated at the fused part. For AO and CO codes, orders are accepted in even quantities. Harness end has an extra cable of approximate 1mm beyond the connector edge. A1 a1 A2 a2 an b1 B2 b2 bn C-47

8 A X X 8822E/8830E/8831E SERIES DUST COVER / TERMINAL EQUIPMENT Material : PVC Color : Semi-transparent X-X Cross Section 7.1(0.280) 5.5(0.217) 5(0.197) 8800 Series Dust Cover DSC-R1 (For Receptacle) DSC-H1 (For Plug) Unit:mm(inch) Dimensions 0.8 (0.031) 7.8(0.307) B X X Material : PVC Color : Semi-transparent 3(0.118) X-X Cross Section 8.2(0.323) 7.2(0.283) 0.8 (0.031) 6.8(0.268) No.of contacts A B (0.685) 14.03(0.552) (0.835) 17.84(0.702) (0.937) 20.38(0.802) (0.984) 21.65(0.852) (1.035) 22.92(0.902) (1.185) 26.73(1.052) 36.5(1.437) 33.08(1.302) (1.484) 34.35(1.352) (1.685) 39.43(1.552) (1.886) 44.51(1.752) (2.185) 52.13(2.052) (2.685) 64.83(2.552) Termination Equipment Hand Press(HP-12) Cable Trimmer(CT-15) Locating Fixture(LF-21) Seating Platen Specifications and dimensions are subject to change without notice. LF-21 accessory * C-48

9 IDC for 25mil(0.635mm) flat cable with One-touch locking ejector system mil(1.27mm) PITCH 2 PIECE CONNECTOR 8825E SERIES C-49

10 C-

11 8825E/8825R/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 0.635mm (25mil) FC Product Concept and Features Exploded View Cover # mm (25mil) pitch flat cable Cover #1 Insulator 8825E Series (Receptacle) 8830E Series (Plug) Highly reliable and original termination form The terminating process of 8825E series starts with the flat cable of 0.635mm pitch placed between Covers #1 and #2 which aligns and prevents any deviation between the cable and connector. The contacts are held in position by the insulator body. The tips of the contact forks with guide taper and latch are sharp and break through the cable sheath to provide a gas tight termination. The contact rib which is purposely rounded creates high pressure to insure a reliable termination without damage during the termination process. The connector can be terminated with a minimum of special tooling in a standard press as well as a press for MIL-STD type connectors. 8825E Series contact Latch Guide taper Rib T erminated area Insulation Displacement Process Insulator Contact Cover #1 Flat Cable Cover #2 Stage 1 Stage 2 Stage 3 Stage 4 The contact is held in position by the insulator body and the contact forks are guided by Cover #1. As pressure is applied the cable is aligned in the grooves of Cover #1 and #2. Cover #1 and #2 hold the cable and stabilize the contact/conductor interface. The contact slides through Cover #1 which supports and aligns the cable through out the termination process. The contacts terminate the conductor and slide into Cover #2. The contact forks are compressed by Cover #2 and form a gas tight termination. The reliability of the termination process depends on maintaining proper alignment of the cable to the connector, the contact to the conductor, and the stability of contact in the connector. The design of the 8825E satisfies the requirements as explained above. C-51

12 8825E/8825R/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 0.635mm (25mil) FC 8825E/8825R F (Receptacle, With locking ejector) Receptacle (IDC Type) Unit:mm(inch) Ref. 7.4(0.291) B Ref. 4.2 (0.165) Open Latch before mating OPEN KEL JAPAN OPEN Cable 19.3(0.760) 11.9(0.469) 16.1(0.634) 4.8(0.189) 6.6(0.260) 3.65(0.144) 8825E F With strain relief Polarity identification C A D 1.27(0.0) pitch R F Without strain relief n-1 Ref. 0.4 (0.016) Ref. 0.3 (0.012) 7.3(0.287) 2 4 "n" is number of contacts n Packaging style Other Product Table / Dimensions No.of contacts Part Number A B C D Number of packaging E F R F (1.096) (0.702) (0.607) (0.4) E F R F (1.246) (0.852) (0.757) (0.600) E F R F (1.346) (0.952) (0.857) (0.700) E F R F (1.396) (1.002) (0.907) (0.7) E F R F (1.446) (1.052) (0.957) (0.800) E F R F (1.596) (1.202) (1.107) (0.9) 8825E F R F (1.846) (1.452) (1.357) (1.200) E F R F (2.096) (1.702) (1.607) (1.4) E F R F (2.296) (1.902) (1.807) (1.6) E F R F (2.596) (2.202) (2.107) (1.9) E F R F (3.096) (2.702) (2.607) (2.4) C-52

13 8825E/8825R/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 0.635mm (25mil) FC 8830E- -170S -F (Plug, With locking system) Plug (Straight Type) Unit:mm(inch) X-X Cross Section 1.75(0.069) 9.7(0.382) 1(0.039) 7.3(0.287) 3(0.118) 7(0.276) 6.6(0.260) 5(0.197) Ref (0.075) Ref (0.225) Ref (0.075) Ref. 0.4 (0.016) 3.65(0.144) 0.4(0.016) Ref (0.075) Polarity identification 1.27(0.0) pitch A B C D X 2-2.3( ) Printed Circuit Board Layout (Component Side View) X 3.8(0.1) 1.4(0.055) 3.7 (0.146) 3.3(0.130) 2-2.3±0.1 ( ±0.004) 3.7 (0.146) 3.3(0.130) 2-2.3±0.1 ( ±0.004) For 20,32,40,60,68,80,100 contacts Connector Outline n- 0.8 min.( min.) n ±0.05 (0.0±0.002) D±0.1(D±0.004) B±0.15(B±0.006) A For 26,30,34, contacts Connector Outline n- 0.8 min.( min.) n ± (0.0±0.002) D±0.1(D±0.004) B±0.15(B±0.006) A =Polarity identification Recommended PCB Thickness t=1.6±0.19(0.063±0.007) n is number of contacts. n n ±0.05 (0.075±0.002) 5.715±0.05 (0.225±0.002) 1.905±0.05 (0.075±0.002) 5.715±0.05 (0.225±0.002) Product Table / Dimensions No.of contacts Part Number A B C D E S -F (1.096) (0.900) (0.623) E S -F (1.246) (1.0) (0.773) E S -F (1.346) (1.1) (0.873) E S -F (1.396) (1.200) (0.923) E S -F (1.446) (1.2) (0.973) E S -F (1.596) (1.400) (1.123) E-0-170S -F (1.846) (1.6) (1.373) E S -F (2.096) (1.900) (1.623) E S -F (2.296) (2.100) (1.823) E S -F (2.596) (2.400) (2.123) E S -F (3.096) (2.900) (2.623) (0.4) (0.600) (0.700) (0.7) (0.800) (0.9) (1.200) (1.4) (1.6) (1.9) (2.4) Packaging style Pipe Number of packaging C-53

14 8825E/8825R/8830E/8831E SERIES 1.27mm PITCH 2 PIECE CONNECTOR / IDC FOR 0.635mm (25mil) FC 8830E/8831E- -170L -F (Plug, With locking system) Plug (Right gle Type) Unit:mm(inch) 8830E- -170L -F X-X Cross Section 2.6(0.102) 8831E- -170L -F B 3(0.118) 4.6(0.181) 1.75(0.069) 7(0.276) 6.6(0.260) 5(0.197) 9.7(0.382) 7.7(0.303) 7.3(0.287) 2.905(0.114) Center of the 1(0.039) mounting hole 3(0.118) 2-2.3( ) Polarity identification Ref. 0.4(0.016) 3.65(0.144) Ref (0.075) Ref (0.075) Ref (0.225) 0.4(0.016) Ref (0.075) A B C D 1.27(0.0) pitch X X 2-2.3±0.1 ( ±0.004) Printed Circuit Board Layout (Component Side View) 4.8(0.189) 1.7(0.067) 12.6 (0.496) 2-2.3±0.1 ( ±0.004) 3.65 (0.144) 4.8(0.189) 1.7(0.067) 12.6 (0.496) For 20,32,40,60,68,80,100 contacts n n-1 Connector Outline n- 0.8 min.( min.) ±0.05(0.0±0.002) D±0.1(D±0.004) B±0.15(B±0.006) A For 26,30,34, contacts Connector Outline n- 0.8 min.( min.) B±0.15(B±0.006) A =Polarity identification Recommended PCB Thickness t=1.6±0.19(0.063±0.007) n is number of contacts (0.144) n n ±0.05(0.0±0.002) D±0.1(D±0.004) ±0.05 (0.075±0.002) ±0.05 (0.075±0.002) 3.81±0.05 (0.1±0.002) 8.5 max. (0.335 max.) PCB edge 1.905±0.05 (0.075±0.002) 3.81±0.05 (0.1±0.002) 8.5 max. (0.335 max.) PCB edge 1.905±0.05 (0.075±0.002) Product Table / Dimensions No.of contacts Part Number A B C D (1.096) (0.900) (0.623) (0.4) E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E-0-170L -F 8831E-0-170L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F 8830E L -F 8831E L -F (1.246) (1.346) (1.396) (1.446) (1.596) (1.846) (2.096) (2.296) (2.596) (3.096) (1.0) (1.1) (1.200) (1.2) (1.400) (1.6) (1.900) (2.100) (2.400) (2.900) (0.773) (0.873) (0.923) (0.973) (1.123) (1.373) (1.623) (1.823) (2.123) (2.623) (0.600) (0.700) (0.7) (0.800) (0.9) (1.200) (1.4) (1.6) (1.9) (2.4) Packaging style Pipe Number of packaging C-54

15 8825E/8825R/8830E/8831E SERIES 8825E/8825R SERIES CABLE ASSEMBLY ORDER CODE 8825E 175 F 8825E-8825E Cable assemblies GG Wiring code Cable type (GG, GH, HH, GO, HO) Omit : Flat cable S : Intermittent bonded cable T : Twist&Flat cable * Cable length (cm), L dimension (Example: 008=8cm) F : RoHS Compliance Plating of contact area Omit : Au 0.05 m (Standard) D : Au 0.25 m (Upon request) Contact name Number of contacts For information regarding semi-standard Series name products (D code plating), please contact 8825E : Receptacle, With strain relief your local sales office. 6.6(0.260) L (min.) 6.6(0.260) Unit:mm(inch) ORDER CODE 8825R 175 I I F 8825R-8825R Cable assemblies Wiring code Cable type (II, IJ, JJ, IO, JO) Omit : Flat cable S : Intermittent bonded cable T : Twist&Flat cable Cable * length (cm), L dimension (Example: 008=8cm) F : RoHS Compliance Plating of contact area Omit : Au 0.05 m (Standard) D : Au 0.25 m (Upon request) Contact name Number of contacts Series name 8825R : Receptacle, Without strain relief 6.6(0.260) L (min.) 6.6(0.260) For information regarding semi-standard products (D code plating), please contact your local sales office. Unit:mm(inch) 8825E F 8825E F 8825R F 8825R F GH 6.6(0.260) L (min.) 6.6(0.260) I J 6.6(0.260) L (min.) 6.6(0.260) 8825E F 8825E F 8825R F 8825R F HH 6.6(0.260) L (min.) 6.6(0.260) JJ 6.6(0.260) L (min.) 6.6(0.260) 8825E F 8825E F 8825R F 8825R F GO HO 6.6(0.260) L (min.) 6.6(0.260) L (min.) IO 6.6(0.260) L (min.) JO 6.6(0.260) L (min.) 8825E F 8825E F 8825R F 8825R F * =Polarity identification =Polarity identification Cable will protrude about 1mm from 8825R connectors. Intermittent bonded and Twist&Flat cable have a restriction on cable length (L dimension) because they are terminated at the fused part. For GO, HO, IO and JO codes, orders are accepted in even quantities. Harness end has an extra cable of approximate 1mm beyond the connector edge. C-55

16 8825E/8825R/8830E/8831E SERIES 8825E/8825R SERIES CABLE ASSEMBLY ORDER CODE 8825E 175 F Contact name Wiring code Cable type (GI, GJ, HI,HJ) Omit : Flat cable S : Intermittent bonded cable T : Twist&Flat cable Cable length * (cm), L dimension (Example: 008=8cm) F : RoHS Compliance Plating of contact area Omit : Au 0.05 m (Standard) D : Au 0.25 m (Upon request) Number of contacts Series name 8825E : Receptacle, With strain relief For information regarding semi-standard products (D code plating), please contact your local sales office. ORDER CODE 8825E 175 F GZH Contact name Number of contacts Series name 8825E : Receptacle, With strain relief Cable length (cm), L2 dimension (Example: 008=8cm) Wiring code Cable length (cm), L1 dimension (Example: 008=8cm) F : RoHS Compliance Plating of contact area Omit : Au 0.05 m (Standard) D : Au 0.25 m (Upon request) If you are interested in the intermittent bonder or Twist&Flat cable, please contact your local sales office. For information regarding semi-standard products (D code plating), please contact your local sales office. 8825E-8825R Cable assemblies GI 6.6(0.260) L (min.) 6.6(0.260) Unit:mm(inch) Daisy chain assembly Unit:mm(inch) GZH 6.6(0.260) 6.6(0.260) 6.6(0.260) L1 (min.) L2 (min.) 8825E F 8825R F GJ 6.6(0.260) L (min.) 6.6(0.260) 8825E F 8825R F 8825E F =Polarity identification HI 8825E F 8825R F 6.6(0.260) L (min.) 6.6(0.260) 8825E F 8825R F ORDER CODE 8825R 175 F IZJ Daisy chain assembly Contact name Number of contacts Series name 8825R : Receptacle, Without strain relief Cable length (cm), L2 dimension (Example: 008=8cm) Wiring code Cable length (cm), L1 dimension (Example: 008=8cm) F : RoHS Compliance Plating of contact area Omit : Au 0.05 m (Standard) D : Au 0.25 m (Upon request) If you are interested in the intermittent bonder or Twist&Flat cable, please contact your local sales office. For information regarding semi-standard products (D code plating), please contact your local sales office. Unit:mm(inch) IZJ 6.6(0.260) L1 (min.) 6.6(0.260) L2 (min.) 6.6(0.260) HJ 6.6(0.260) L (min.) 6.6(0.260) 8825R F 8825R F 8825R F 8825E F 8825R F =Polarity identification =Polarity identification Cable will protrude about 1mm from 8825R connectors. Cable will protrude about 1mm from 8825R connectors. Intermittent bonded and Twist&Flat cable have a restriction on cable length (L dimension) because they are terminated at the fused part. Harness end has an extra cable of approximate 1mm beyond the connector edge. * C-56

17 Single end assembly (Example: GO wiring) A1( ) (Component side view) A 2 for 20, 32, 40, 60, 68, 80, 100 pins for 26, 30, 34, pins -1-1 (Straight or Right gle Plug) B A1 8825E/8825R/8830E/8831E SERIES PIN ASSIGNMENT Pin Assignment A1 A 2 B =Polarity identification Note: Please be careful when trimming the cable after terminating the 8825E/8825R Series, to protect against the flat ribbon cable that extends beyond the edge of the cable connector body touching the PCB and creating a short. (When used with Right angle Plug connector) Double end assembly (Example: GH wiring) (Component side view) A1( ) A1( ) A 2 B2 A1 A1 A 2 B2 for 20, 32, 40, 60, 68, 80, 100 pins for 20, 32, 40, 60, 68, 80, 100 pins for 26, 30, 34, pins for 26, 30, 34, pins (Straight or Right gle Plug) (Straight Plug) =Polarity identification Daisy chain assembly (Example: GZH wiring) (Component side view) A1( ) A1( ) A1( ) A1 A1 A1 A 2 B2 A 2 B2 A 2 B2 for 20, 32, 40, 60, 68, 80, 100 pins for 20, 32, 40, 60, 68, 80, 100 pins -1 for 20, 32, 40, -1 60, 68, 80, 100 pins for 26, 30, 34, pins for 26, 30, 34, -1 pins (Straight or Right gle Plug) (Straight Plug) (Straight Plug) for 26, 30, 34, -1 pins =Polarity identification C-57

18 A X X 8825E/8825R/8830E/8831E SERIES DUST COVER / TERMINAL EQUIPMENT Material : PVC Color : Semi-transparent X-X Cross Section 7.1(0.280) 5.5(0.217) 5(0.197) 8800 Series Dust Cover DSC-R1 (For Receptacle) DSC-H1 (For Plug) Unit:mm(inch) Dimensions 0.8 (0.031) 7.8(0.307) B X X Material : PVC Color : Semi-transparent 3(0.118) X-X Cross Section 8.2(0.323) 7.2(0.283) 0.8 (0.031) 6.8(0.268) No.of contacts A B (0.685) 14.03(0.552) (0.835) 17.84(0.702) (0.937) 20.38(0.802) (0.984) 21.65(0.852) (1.035) 22.92(0.902) (1.185) 26.73(1.052) 36.5(1.437) 33.08(1.302) (1.484) 34.35(1.352) (1.685) 39.43(1.552) (1.886) 44.51(1.752) (2.185) 52.13(2.052) (2.685) 64.83(2.552) Termination Equipment Hand Press(HP-12) Cable Trimmer(CT-15) Locating Fixture(LF-22) Seating Platen Specifications and dimensions are subject to change without notice. LF-22 accessory * C-58

19

20 D-2

21 Specifications 8840/88/8855 SERIES I/O CONNECTOR Connector Insulator : Glass-filled 66 Nylon(UL94V-0) Contact : Copper alloy Plating : Mating area ; Gold over Nickel Terminal area ; Gold over Nickel (8840/8855) Tin copper over Nickel (88) 8840 Series D-Shaped shell : Material ; Steel Plating ; Nickel over Copper Current rating : 0.5A per contact Contact resistance : 30m max. Dielectric resistance : 6V AC for 1 minute Insulation resistance : 1,000M min. at 0V DC Operating temperature : -55 C~+85 C Recommended Cable : #28 AWG(7/0.127) Outer diameter of insulation : 0.58mm Cover and accessories (Materials and plating) Diecast cover : Zinc alloy(20-80 pins), Aluminum(100 pin), Plating : Nickel over Copper Spring lock : Stainless steel Lock screw : Steel with Nickel over Copper plating Cable clamp : Straight out : Stainless steel Horizontal out : Steel with Nickel over Copper plating Lock nut : Steel with Nickel over Copper plating Connector Series : Receptacle No. of Contacts. 20,28,34,,60,68,80,100 Contact style : 174 Recommended Cable See recommended Cable mentioned under. Selective plating D : 0.25 m min F F : RoHS Compliance Order Code Cover for Straight Cable Exit 8840S- -CVR Cover for Straight Cable Exit(100pin) 8840S CVR No. of contacts 20,28,34,,60,68,80 Mounted panel thickness 1 : No panel 2 : 0.8~1.0mm 3 : 1.6mm Board Mounted Plug Series : plug No. of contacts 20,28,34,,60,68,80 and 100. Terminal Style L : Right angle S : Straight Selective Plating D : 0.25 m min F F : RoHS Compliance Lock Nut(100pin connector only) 88-SR- Cable Plug F F : RoHS Compliance Selective plating D : 0.25 m min. Recommended Cable See recommended Cable mentioned under. No. of contacts 20,28,34,,68,80 and 100. Panel thickness 01 : No panel 02 : 0.8~1.0mm 03 : 1.6mm 05 : 0.8mm (Lock nut are sold in pairs) *Recommended cable A: #28 AWG (7/0.127) Discrete wires B: #28 AWG (7/0.127) Laminated wires F: #28 AWG (7/0.127) Flat cable (8855 only) 100 pin of 8855 and 88 : Please specify lock nut when you ordering D-3

22 8840 SERIES I/O CONNECTOR ( RECEPTACLE ) 8840 Series (20, 28, 34,, 60, 68, 80 pins) Straight Receptacle Cable Exit Receptacle & Cover 11±0.5(0.433±0.020) G A B F Unit:mm(inch) 34.2(1.346) 5.6(0.220) Packaging style (C) D E 5(0.197) Product Table / Dimensions Other No.of contacts Part Number D-F S-020-CVR D-F S-028-CVR D-F S-034-CVR D-F 8840S-0-CVR D-F S-060-CVR D-F S-068-CVR D-F S-080-CVR A (1.181) (1.381) (1.531) (1.931) (2.181) (2.381) (2.681) B (0.878) (1.078) (1.228) (1.628) (1.878) (2.078) (2.378) C D E F G (0.839) (1.039) (1.189) (1.591) (1.839) (2.039) (0.649) (0.849) (0.999) (1.399) (1.649) (1.849) (0.4) (0.6) (0.800) (1.200) (1.4) (1.6) (0.264) 7. (0.295) 8.70 (0.343) (0.394) (0.433) (0.472) (0.264) 7. (0.295) 8.70 (0.343) 8. (0.335) 8. (0.335) 8. (0.335) 8. (2.339) (2.149) (1.9) (0.512) (0.335) Number of packaging Receptacle & Cover 8840 Series (100 pin) Straight Receptacle Cable Exit 15(0.591) 11 (0.433) Unit:mm(inch) 13.5±0.5 (0.531±0.020) 11±0.5(0.433±0.020) 10(0.394) 89.82(3.536) 83.82(3.300) 57(2.244) X Y Screw X-X Cross Section Y-Y Cross Section 1(0.039) 6(0.236) 1.1(0.043) 9.2(0.362) 33(1.299) 43(1.693) Product Table / Dimensions Part Number Mounted Panel Thickness D-F 8840S CVR No Panel D-F 8840S CVR mm D-F 8840S CVR 1.6mm Packaging style Other Number of A packaging 33.8 (1.331) (1.311) (1.291) 25 M2.6 5(0.197) A 5.6(0.220) X 67.28(2.649) 64.23(2.529) 62.23(2.4) 1.27pitch(0.0) Y 5(0.197) D-4

23 D-5 Dimensions A B C (1.315) (1.515) (1.665) (2.065) (2.315) (2.515) 71. (2.815) (1.079) (1.279) (1.429) (1.829) (2.079) (2.279) 65. (2.579) (0.8) (1.0) (1.200) (1.600) (1.8) (2.0) (2.3) D E F (0.659) (0.859) (1.009) (1.409) (1.659) (1.859) (2.159) (0.4) (0.6) (0.800) (1.200) (1.4) (1.6) (1.9) (0.961) (1.161) (1.311) (1.711) (1.961) (2.161) 62. (2.461) No.of contacts Number of packaging Pipe Packaging style identification Polarity A B C D E 1.27(0.0)pitch 0.9(0.035) 0.9(0.035) X X 2-M2.5(0.098) 2-M2.5 (0.098) 10.7(0.421) 5.9(0.232) 3±0.5 (0.118±0.020) 10.5(0.413) 7.3(0.287) 5.8(0.228) 0.4(0.016) 1.905(0.075) 1.905(0.075) 1.905(0.075) 5.715±0.05 (0.225±0.002) E±0.1 Ref.10.5 (0.413) 1.905±0.05 (0.075±0.002) 1.905±0.05 (0.075±0.002) B±0.15(0.006) B±0.1(0.004) 7.6±0.1 (0.299±0.004) F R1.4(0.055) 2.8(0.110) Ref.6.075(0.239) Pins- 0.8min.(0.031) ± 0.1(0.110±0.004) 5.715±0.05 (0.225±0.002) E±0.1(0.004) B±0.15(0.006) Ref.A Pins- 0.8min.(0.031) ± 0.1(0.110±0.004) 1.27±0.05(0.0±0.002) 1.27±0.05(0.0±0.002) (0.004) Ref.10.5 (0.413)

24 Packaging style Product Table Pipe No.of contacts 100 Part Number SD-F Number of packaging 5 D-6

25 28,34,60,68,80 pins 2-M2.5(0.098) 2.5(0.098) Polarity identification 10.5(0.413) 7.3(0.287) 5.8(0.228) 9.7(0.382) 7.3(0.287) 7.7(0.303) 2.905(0.114) Center of 5.9(0.232) 3.8(0.1) mounting hde 0.8(0.031) 4(0.157) 8.5(0.335) (0.075) (0.075)1.905(0.075) 2.8±0.5 (0.110±0.020) 0.4(0.016) 2(0.079) 0.9(0.035) A B C D 0.9(0.035) E 1.27(0.0)pitch X X 2-M2.5(0.098) 5.905(0.232) 4.795(0.187) 5.7(0.224)max. 7.8(0.307) ± 0.1(0.110± 0.004) Pins- 0.8min.(0.031) 1.27±0.05(.0±.002) E±0.1(.004) B±0.15(.006) 1.905±0.05 (0.075± 0.002) 3.81±0.05 (0.1± 0.002) 1.905±0.05 (0.075± 0.002) R1.4(0.055) B±0.1(0.004) F 2.8(0.110) 7.6±0.1 (0.299± 0.004) 4.795(0.189) 5.7(0.224)max. 7.8(0.307) 7.55(0.297) ± 0.1(0.110± 0.004) Pins- 0.8(0.031)min. 1.27±0.05(0.0± 0.002) E±0.1(0.004) B±0.15(0.006) 1.905±0.05 (0.075± 0.002) 1.905±0.05 (0.075± 0.002) 3.81±0.05 (0.1± 0.002) Dimensions No.of contacts A B C D E (1.315) (1.515) (1.665) (2.065) (2.315) (2.515) 71. (2.815) (1.079) (1.279) (1.429) (1.829) (2.079) (2.279) 65. (2.579) (0.8) (1.0) (1.200) (1.600) (1.8) (2.0) (2.3) (0.659) (0.859) (1.009) (1.409) (1.659) (1.859) (2.159) (0.4) (0.6) (0.800) (1.200) (1.4) (1.6) (1.9) F (0.961) (1.161) (1.311) (1.711) (1.961) (2.161) 62. (2.461) Packaging style Pipe Number of packaging D-7

26 D-8

27 A B C Number of pins Dimensions pin (0.154) 8(0.315) 4(0.157) 2(0.079) 0.4(0.016) 5.8(0.228) 1.5(0.059) 3.7(0.146) 6.8(0.268) 7.3(0.287) 16.5(0.6) A B C D E F (1.315) (1.079) (0.817) (0.8) (0.659) (0.517) (1.515) (1.279) (1.017) (1.0) (0.859) (0.717) (1.665) (1.429) (1.167) (1.200) (1.009) (0.867) (2.065) (1.829) (1.567) (1.600) (1.409) (1.267) (2.315) (2.079) (1.817) (1.8) (1.659) (1.517) (2.515) (2.279) (2.017) (2.0) (1.859) (1.717) 71. (2.815) 65. (2.579) (2.317) (2.3) (2.159) (2.017) Packaging style Pipe Number of packaging Number of pins X X 2-M2.5 (0.098) 4.8(0.098) 10.6(0.417) 5.9 (0.232) Polarity identification 2-M2.5 (0.098) 10.5(0.413) 9.4(0.370) 0.9(0.035) D 0.9(0.035) 7.3(0.287) E F 1.27(0.0)Pitch 89.82(3.536) 83.82(3.300) 71.55(2.817) Number of pins 2-M2.5(0.098) 2-M3(0.118) 3.9(0.154) 8(0.315) 4(0.157) 2(0.079) 0.4(0.016) 5.8(0.228) 1.5(0.059) 3.7(0.146) 6.8(0.268) 7.3(0.287) 16.5(0.6) X X 0.9(0.035) 72.4(2.8) 0.9(0.035) 67.53(2.659) 62.23(2.4) 1.27(0.0)Pitch 4.8 (0.189) 10.6(0.417) 5.9 (0.232) Polarity identification 2-M2.6(0.102) (For Lock nut) Product Table Part Number D-F No.of contacts (0.413) 9.4 (0.370) 7.3(0.287) Packaging style Pipe Number of packaging 5 R1.4(0.055) A±0.1(0.004) B 2.8(0.110) 7.6±0.1 (0.299 ± 0.004) 2-3.5(0.138) A±0.1 B 7.6±0.1 (0.299± 0.004) D-9

28 8840 S D F S D F - - D-10

29 Cable Plug Order Code D F - - D-11

30 D F D F- - (C)

31 D-13

32 D-14

33 D-15

34 D-17

35 D-18

36 Packaging style Product Table Tray No.of contacts 240 Part Number DS01P-240R-F Number of packaging 10 D-19

37 86.1(3.390) 5.5 (0.217) 14.72(0.58) 1.2(0.047) 93(3.661) 86.1(3.390) 76.32(3.005) 71.4(2.811) 0.6(0.024)pitch 0.25(0.009) 75(2.953) X X 8.5 (0.335) 2-M5 Fine thread 4.75(0.187) 1.2(0.047) 1.2(0.047) 7.43(0.293) 2.2 (0.087) 3(0.118) 1.2(0.047) 8 (0.315) 1.9(0.075) 1.2(0.047) 1.2(0.047) Packaging style Product Table No.of contacts 240 Part Number DS01R-240R-F Tray Number of packaging ±0.05(0.094±0.002) 1.2±0.05(0.047±0.002) 1.2±0.05(0.047±0.002) 3.6±0.05 (0.142±0.002) ±0.05(3.390±0.002) 75±0.05(2.953±0.002) 71.4±0.05(2.811±0.002) 0.6±0.05 (0.024±0.002)pitch 3 1.8±0.05(0.071±0.002) (0.02 ) Pattern prohibition area ±0.05 (0.059±0.002) 2-2.7±0.05 (0.106±0.002) 0.7(0.028) 2.3±0.1 (0.091±0.004) 7.89(0.384) 86.1±0.1(3.390±0.004) 76.72±0.1(3.020±0.004) 4-R0.5±0.1 (0.02±0.004) 2-5.2±0.05 (0.205±0.002) 5.05±0.05 (0.199±0.002) D-20

38 Packaging style Packaging style Product Table Other Product Table Other No.of contacts 240 Part Number DS01P-GP-01 Number of packaging 1 No.of contacts 240 Part Number DS01R-SR-01 Number of packaging 1 5.2(0.205) MAX. 2.8(0.11) 11.7(0.461) 1.8 (0.071) 5(0.197) 6.93 (0.273) 2.9(0.114) 4(0.157) 4.62 (0.182) 0.6(0.024) 6 (0.236) (0.035)LAND (0.020)THROUGH HOLE Section A Component side ( )LAND DETAIL OF SECTION A 0.15(0.006) (0.035)LAND (0.020)THRUGH HOLE Section B Soldering side (Viewed from component side) ( )LAND 0.15(0.006) DETAIL OF SECTION B 1(0.039) 25.54(1.006) 1 1(0.039) 8(0.315) 5.11 (0.201) 2.3(0.091) 2.3(0.091) 10.17(0.4) D-21