Depth Gage A standard measuring tool of industry

Transcription

1 epth Gage standard measuring tool of industry epth Micrometer SERIES 329, 129 Interchangeable Rod Type This type uses interchangeable rods to enable wide-range measurement. Order Nos , , , and allow integration into statistical process control and measurement systems. Measuring rod diameter: ømm Measuring rod lock. Ratchet stop provides constant measuring force. Technical ata ccuracy: ±3μm/± for micrometer head (Excluding quantizing error) Flatness of reference face: 1.3μm ( ) for 63.5mm (2.5 ) length base, 2μm ( ) for 101.6mm ( ) length base Flatness of measuring rod face: 0.3μm Parallelism between reference face and measuring rod face: (+R/50)μm, R = Max. measuring length (mm) Fraction rounded up ±(2+R/75)μm for interchangeable rod, R = Max. range (mm) Fraction rounded up Battery: SR (1 pc), , for initial operational checks (standard accessory) Battery life*: pprox. 2. years under normal use * igital models Scale type: Electromagnetic induction absolute encoder Order No. Range Resolution No. of rods igimatic (C) mm mm x 16mm mm 12 Order No. Range Graduation No. of rods nalog mm x 16mm mm x 16mm mm x 16mm 0.01mm mm x 16mm mm x 16mm mm x 16mm 12 Interchangeable rod (Optional ccessories) (Check and adjust the origin point before measurement) / Order No. Range Resolution No. of rods igimatic (C) "/0.001mm 6 x "/0.001mm 12 Order No. Range Graduation No. of rods nalog x x x x " x x x x x * For the function of igimatic models , , , and , refer to page -62. These models are not waterproof. Optional accessories for , , , and For details, refer to page -21. Connection cable for , , , and CZ662: SPC cable with data button (1m) 05CZ663: SPC cable with data button (2m) USB Input Tool irect 06V380B: SPC cable for USB-ITN-B (2m) Connection cables for U-WVE-T 02Z790B: SPC cable for U-WVE with data button (160mm) 02ZE10B: SPC cable for footswitch Range 0-25mm 25-50mm 50-75mm 75 - mm - 125mm mm 150-5mm 5-200mm mm mm mm mm nalog models Order No mm 129mm 15mm 9mm 20mm 229mm 25mm 279mm 30mm 329mm 35mm 379mm Order No igimatic models 15mm 9mm 20mm 229mm 25mm 279mm 30mm 329mm 35mm 379mm 0mm 29mm Range Order No nalog models 10.3mm 129.7mm 155.1mm 180.5mm 205.9mm 231.3mm 256.7mm 282.1mm 307.5mm 332.9mm 358.3mm 383.7mm Order No igimatic models 155.1mm 180.5mm 205.9mm 231.3mm 256.7mm 282.1mm 307.5mm 332.9mm 358.3mm 383.7mm 09.1mm 3.5mm -61

2 IMENSIONS Functions of , , , and ORIGIN set: Resets the BS (absolute) origin at (BS measurement system) the current position. 16 ZERO set: (INC measurement ) The display is set to zero at the current position for incremental (comparative) mode measurements. bsolute system measurement mode can easily be restored when required ø Range Preset: Enters a specified value into the display at the current position. ø18.3 Hold: The displayed value is temporarily held at the current value so that the instrument can be moved before the display is read. Useful for making measurements in difficult-to-access , Measurement data output: Equipped with a igimatic data output port to incorporate instrument into an SPC or networked measurement system. uto-power ON/OFF: If the instrument is not used for approximately 20 minutes, the display turns off while keeping the current origin of the BS measurement system. The display is restored when the spindle is rotated. Error alarm: If overflow of the display or a calculation error occurs, the measurement function stops and a message is displayed. Measurement will not be continued so as to avoid an erroneous display value. Warning light indicates low battery (63.5) 16 Range 18 ø 8.8 ø , ( ): Function lock: PRESET (origin set) and ZERO (zero set) buttons can be locked in order to prevent them being changed unintentionally. -62

3 epth Gage standard measuring tool of industry epth Micrometer SERIES 128 Measuring rod diameter: ømm Measuring rod lock is attached. *Measuring rod is attached on the rear side of the micrometer. Carbide-tipped measuring rod model is available. Ratchet stop provides constant measuring force Technical ata ccuracy: ±3μm (± ) Flatness of reference face: 1.3μm ( ) for 63.5mm (2.5 ) length base, 2μm ( ) for 101.6mm ( ) length base Flatness of measuring spindle face: 0.3μm Order No. Range Graduation * mm 0.01mm x 16mm * 1 *1 with carbide-tipped measuring rod Order No. Range Graduation x " x.63 epth Micro Checker SERIES 515 The epth Micro Checker is designed to check and help set the range-end points of a depth micrometer. n inspection certificate is supplied as standard. Refer to page X for details Order No. Range Block pitch accuracy nvil block accuracy mm mm ±(1+/150)µm, = ength to check (mm) ±0.5µm Order No. Range Block pitch accuracy nvil block accuracy ±(0+/0.15) μinch, = ength to check (inch) 0µinch IMENSIONS 25mm anvil block provides the reference surface for the depth micrometer rod

4 BSOUTE igimatic epth Gage SERIES 571 Optional accessories for IP67 coolant proof models For details, refer to page -39. Connecting cables 05CZ62: SPC cable with data button (1m) 05CZ625: SPC cable with data button (2m) USB Input Tool irect 06CV380: SPC cable for USB-ITN-B (2m) Connecting cables for U-WVE-T 02Z790: SPC cable for U-WVE with data button (160mm) 02ZE10: SPC cable for footswitch Optional accessories for other than IP67 coolant proof models For details, refer to page : ata hold unit Connecting cables for IT/P/MUX 95919: SPC cable with data button (1m) : SPC cable with data button (2m) USB Input Tool irect 06V380C: SPC cable for USB-ITN-C (2m) Connecting cables for U-WVE-T 02Z790C: SPC cable for U-WVE with data button (160mm) 02ZE10C: SPC cable for footswitch Coolant proof models achieve IP67 protection level. Enables stable depth measurement with a resolution of 0.01mm. BSOUTE igital Caliper (Refer to page -8 for BSOUTE function.) Sliding operation of models with the measuring ranges 150mm (6"), 200mm (8") and 300mm (12") is smooth and comfortable. Battery: SR (1 pc), For initial operational checks (standard accessory) Optional longer extension bases are available. (Except for models with measuring ranges of 600, 750, 0mm) Order No. Range Resolution ccuracy* Repeatability (W x T) Battery life mm ±0.02mm 5years mm mm ±0.03mm x 6mm 3.5years 0.01mm ** 0-150mm ±0.02mm 3years ** 0-200mm 0.01mm ** 0-300mm ±0.03mm x 6.3mm 1years mm ±0.05mm mm 0.01mm 250 x 10mm 3years mm ±0.06mm mm ±0.07mm * Excluding quantizing error ** IP67 Coolant Proof model IMENSIONS / Order No. Range ccuracy* Repeatability (W x T) Battery life ±.001"/±0.02mm ±.001"/±0.02mm 5years ±.0015"/±0.03mm 3.5years 3.93 x ** 0-6 ±.001"/±0.02mm 3years ** 0-8 ±.001"/±0.02mm 0005"/ ** 0-12 ±.0015"/±0.03mm 0.01mm 1years ±.002"/±0.05mm ±.002"/±0.05mm ±.0025"/±0.06mm 9.8 x.39 3years ±.0025"/±0.07mm * Excluding quantizing error ** IP67 Coolant Proof model 75.3 (73.7) Thickness of main beam (0.9) , , , , *( ): No , (27.5) ø9 Range thickness 0-150mm mm mm 03 (0) 6 (6.3) 0-50mm mm mm mm ( ): Coolant Proof models Thickness of main beam Thickness of main beam , , ,

5 epth Gage standard measuring tool of industry Vernier epth Gage SERIES 527 Standard gage for depth measurement. Optional longer extension bases are available. (Except for models with measuring ranges of 600 and 0mm) Fine adjustment Order No. Range Vernier reading ccuracy (W x T) Remarks mm ±0.05mm mm x 6.5mm mm 0.05mm ±0.08mm mm ±0.10mm 250 x 10mm mm ±0.15mm Order No. Range Vernier reading ccuracy (W x T) Remarks mm mm 0.02mm ±0.03mm x 6.5mm with fine adjsutment Order No. Range Vernier reading ccuracy (W x T) Remarks ± x ±.0015 with fine adjustment ± x ±.003 IMENSIONS ø , , (27.5) Thickness of main beam Range 0-150mm mm mm Range 0-600mm mm Thickness of main beam , Thickness of main beam Range 0-150mm mm (27.5) ,

6 epth Gage SERIES 527, 571 Hook End Type The end of the main beam is hook-shaped to allow depth and thickness measurements of a projected portion or lip in a hole, in addition to standard depth measurement. Coolant proof models achieve IP67 protection level. Enables stable depth measurement with a resolution of 0.01mm. BSOUTE igital Caliper (Refer to page -8 for BSOUTE function.) igital models display the compensation value by pressing the OFF switch to allow direct reading. Slider operation of the digital models is smooth and comfortable. llows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page -3. Battery: SR (1 pc), For initial operational checks (standard accessory) Battery life: pprox. 3 years under normal use (for digital models) Optional longer extension bases are available. pplications 1 = Reading on depth vernier = Reading on hook vernier 3 = Reading on hook vernier Reading on depth vernier 3 Optional accessories for digital models For details, refer to page -21. Connection cables for coolant proof models 05CZ62: SPC cable with data button (1m) 05CZ625: SPC cable with data button (2m) USB Input Tool irect 06CV380: SPC cable for USB-ITN-B (2m) Connecting cables for U-WVE-T 02Z790: SPC cable for U-WVE with data button (160mm) 02ZE10: SPC cable for footswitch IMENSIONS Thickness of main beam , -02, Order No. Range: 1 (2 and 3) Resolution ccuracy* (W T) igimatic (C) ** mm (0-150mm) ** mm (0-200mm) nalog mm (0-150mm) 0.01mm ±0.03mm 6mm ±0.05mm mm (0-200mm) 0.05mm mm (0-300mm) ±0.08mm * Excluding quantizing error ** IP67 Coolant Proof model 6.5mm / Order No. Range: 1 (2 and 3) Resolution ccuracy* (W T) igimatic (C) (0-6 ) (0-8 ).0005 / 0.01mm ±0.0015"/ ±0.03mm 6mm * Excluding quantizing error Order No. Range: 1 (2 and 3) Vernier reading ccuracy (W T) nalog mm (0-150mm) ±0.03mm mm (0-200mm) 0.02mm 6.5mm mm (0-300mm) ±0.0mm Range 0-150mm mm mm ***10.16 (0. ) / *** / Range 0-150mm mm

7 epth Gage standard measuring tool of industry Extension s Optional accessory for epth Gage ttaches to the base (reference face) plate of a depth gage to extend its span. Refer to the illustrations at left for attachment details. Extension base is three times the length of the base for models of less than 300mm range. These extension bases cannot be attached to 0-600mm, 0-0mm, 0-2 and 0-0 range models. Example of attaching the extension base Extension base Order No. Size n mm mm mm IMENSIONS Order No. Size n Extension base B B epth gage base Washer Mounting screw M n holes tapped M 0.7 R5 R5 7 Order No. B n T T: thickness epth Gage ttachment Optional ccessory for Calipers ttaching this depth gage attachment to the depth measurement face of the caliper makes depth measurement accurate and secure. Order No. Size pplicable measuring range of caliper mm mm, 150mm, 200mm,, 6 and mm mm, 150mm, 200mm,, 6 and mm 300mm and IMENSIONS C E Example of attaching the extension base B Size B C E T 75mm mm mm T: thickness -67

8 Note: *1 Caution should be exercised when exchanging a contact point of a epth Gage (ial/igimatic Indicator) If a different size contact point is mounted, displacement of the contact point from the base contact surface will be changed and as a result, measurement range may not be maintained. contact point cannot be mounted to a epth Gage, if its diameter is too large for the hole diameter of the base. Parallelism adjustment with the bottom face of the base is required when mounting a flat contact point such as the flat/needle or carbide-tipped contact point. *2 Caution on should be exercised when using an extension rod If the total length of the extension rod exceeds 110mm (.5") use the instrument in a vertical position (contact point downward). Use a master gage (such as Gauge blocks) to perform zero-setting when the extension rod is mounted. (Master gage is an optional accessory.) ial epth Gage SERIES 7 Optimal for hole, narrow groove and step measurement Example of use Extension rod Master gage (optional accessory) Contact point *3 Indicators Indicators for a epth Gage is used for the epth Gage. When the indicator is exchanged and extension rod is connected longer, the contact-point may incline significantly. Code No.53-00B / 53-02B for epth Gage has a measuring force less than 1.5N. Order No. Range Graduation ccuracy Stroke Measuring force W T Flatness Mounting position of a dial indicator Provided with a needle mm 0mm point (No.13713) 7211 ±15µm 10mm 1.N 63.5mm Provided with a carbidetipped ball point 0-200mm mm 16mm 1 (No.21J22) mm Provided with a carbidetipped ball point 0-210mm ±30µm 30mm 2.5N mm (No.21J225) 7220 mm 2 Provided with a carbidetipped ball point 0-200mm 0.01mm 18mm 5µm mm 3 (No.21J22) 10mm Provided with a needle 7222 mm 0-10mm ±15µm 1.N point (No.13713) 7223 ø25mm Provided with a carbidetipped ball point 722 ø0mm 1 (No.21J22: mm) mm 5mm 63.5mm 16mm (No.21J226: 22mm) Order No. Range Graduation ccuracy Stroke Measuring force 72S 7218S 7237T 7238T ± N.2 1.N W T Flatness 63.5mm 101.6mm Mounting position of a dial indicator 63.5mm 16mm.0002" mm 7220 and 7221 allow the mounting position of a dial indicator to be varied. Contact point* 1 Extension rod* 2 Indicator* 3 (dial indicator) 5 pcs. (10, 20, 30, 30, mm) 3 pcs. (30, 60, 90mm) 5 pcs. (10, 20, 30, 30, mm) 5 pcs. (10, 20, 30, 30, mm) 2902SB for epth Gage 2952SB for epth Gage 2902SB for epth Gage 1162T for epth Gage (Back plunger type) Contact point* 1 Extension rod* 2 Indicator* 3 (dial indicator) Carbide ball point (No.21JZ22) Provided with a carbidetipped ball point (No.21JZ22:.8mm) (No.21JZ23: 22.9mm) 3 pcs. (1, 2, ) pcs. (.5, 1, 2, ) 290SB for epth Gage 1168T for epth Gage (Back plunger type) -68

9 epth Gage standard measuring tool of industry IMENSIONS (10) (11) ø SR (10) SR 0.2 hole diameter hole diameter ø3 hole diameter hole diameter ø6 ø (11) (10) W SR W=ø25mm 722 W=ø0mm () (10) (35) (11) W SR W=63.5mm 7212 W=101.6mm ø (10) 7213, 721: (30) 72S, 7218S: (26) (35) (11) 1 (.8) hole diameter ø6 W SR , 72S W=63.5mm 721, 7218S W=101.6mm () (10) (35.7) (18) ø6.5 hole diameter ø SR (10) () (35.7) (18) hole diameter ø , 7237T, 7238T (No.-8 UNF) M2.5x0.5 Part No. 21J226 (7231) Part No. 21J23 (7237T, 7238T) (interchangeable point) is provided as standard. Order No. B C 7231 (5) T, 7238T (5.) BSOUTE igimatic epth Gage SERIES 57 Easy-to-read dial effectively prevents misreading. llows integration into statistical process control and measurement systems for models with measurement data output connector. Refer to page -3. IMENSIONS 8 ø6.5 SR (35) (11) hole diameter ø6 SR 1.5 B 63.5 SR 1.5 C (105) 10 5 SR 0.2 (67) Order No. Range Graduation Stroke ccuracy* Measuring Contact point* force 1 Extension rod* 2 Indicator* W T flatness mm 0.01mm ±20µm 5μm Provided with a 53-00B* mm 3 carbide-tipped ball 5 pcs mm 12.7mm 1.5N 16mm mm point (10, 20, 30, 30, mm) 0.001mm ±5µm 2μm (No.21J22) B mm / Order No. Range Graduation Stroke ccuracy* Measuring force W T flatness Coutact point* 1 Extension rod* 2 Indicator* S "/0.01mm ± Provided with a 53-02B* S 3 carbide-tipped ball pcs N S 2.5 point (.5", 1", 2", ").00005"/0.001mm ± (No.21JZ22) B S *1 to *3: Refer to page -68. *: Excluding quantizing error. (12) (35) (11) SR1.5 hole diameter ø6-69

10 -