Height Gauge Page 234. Height Gauge Accessories Page 241
|
|
- Abner Wilcox
- 6 years ago
- Views:
Transcription
1 Height Gauges Height Gauge Page 234 Height Gauge Accessories Page 241 Height Gauge with Data Processing Unit Page
2 Lightweight Vernier Height Gauge Series 506 This vernier height gauge offers you the following benefits: You can take accurate and fast readings thanks to the satin chrome finished main and vernier scales. A carbide-tipped scriber is provided. Functions Series 506 Fine adjustment Specifications Graduation Delivered Refer to the list of specifications. 0,02 Including scriber and scriber clamp 07GZA004 Scriber clamp with plastic screw (12.7 x 6.35 ) Carbide-tipped scriber (12.7 x 6.35 ) 47 length Large digit 5363 Holding bar 50 (12.7 x 6.35 ) Swivel clamp for Ø 4/ Ø 8 stem and dove tail Fine adjustment Metric Mass [] [kg] ±0,03 1,
3 Vernier Height Gauge Functions Series 514 Fine adjustment Specifications Graduation Scale adjustment Delivered Refer to the list of specifications. 0,02 15 for models up to 0 25 for models 00 and 1500 Including scriber, scriber clamp and cover Series 514 This vernier height gauge offers you the following benefits: You can take accurate and fast readings thanks to the satin chrome finished main and vernier scales. A carbide-tipped scriber is provided. 05GZA033 Scriber clamp ( x ) 07GZA000 Carbide-tipped scriber ( x ) 80 length Carbide-tipped scriber ( x ) 150 length Scriber Clamp (16 x ) 00 Carbide-tipped scriber (16 x ) 144 length 07GZA033: for all except GZA000: 514-2, 514-4, : 514-8, : , 514-5, : Holding bar 50 ( x ) 0020 Holding bar 0 ( x ) Swivel clamp for Ø 4/ Ø 8 stem and dove tail 07GZA003 Magnifier for reading scale (0/450/0 models) 07GZA015 Magnifier for reading scale (00 models) 53638: except Metric L a b c d e Mass Fine adjustment [] [] [] [] [] [] [] [kg] ±0, , ±0, , ±0, , ±0, ±0, , delivered with magnifier to
4 NO MADE IN JAPAN Dial Height Gauge Series 12 This dial height gauge offers you the following benefits: It allows you easy and error-free reading with both up and down digital counters as well as a dial. It comes with a hand wheel so you can easily make rough adjustments. A carbide-tipped scriber is provided Specifications Graduation Delivered Refer to the list of specifications 0,01 Including scriber, scriber clamp and cover 05GZA033 Scriber clamp ( x ) 07GZA000 Carbide-tipped scriber ( x ) 80 length Holding bar 50 ( x ) Swivel clamp for Ø 4/ Ø 8 stem and dove tail Metric Mass [] [kg] ±0,03 4, ±0,05, ±0,05, ±0, Reset (32) 63 (70) (40.5) 470 (648, 78) 6.5 (114.5) Reading off Counter : 58,00 Dial Gauge : 0, Result : 58, ø15 (ø20) 33 (38) ø (54) (120) 135 (180) 0-0 (0-450, 0-0 )
5 ABSOLUTE Digimatic Height Gauge Functions Series 570 ORIGIN ZERO/ABS ±SWITCHING ON/OFF DATA/HOLD Low voltage alarm Data output PRESET Specifications Scale Max. response speed Digital step Battery life Display Delivered Refer to the list of specifications. (excluding quantizing error) ABSOLUTE electrostatic linear encoder Unlimited 0,01 approx hours LCD, 6-digit Including 1 battery, scriber and scriber clamp Series 570 This Digimatic height gauge is very precise and reliable, and offers you the following benefits: Its built-in ABSOLUTE linear encoder means you don t have to set the reference point at every power-on, improving reliability as over-speed errors cannot occur. Fine-adjustment gives you precise positioning. It comes with large and smooth-acting slider hand wheel for coarse- and fine-adjustments (570-3xx only). A carbide-tipped scriber is provided. SPC data output Scriber Clamp (12.7 x 6.35 ) Carbide-tipped scriber (12.7 x 6.35 ) 47 length 05GZA033 Scriber clamp ( x ) Carbide-tipped scriber ( x ) 150 length 01338, 00173: , GZA033, 05200: Digimatic cable (1 m) 0540 Digimatic cable (2 m) 02AZD70F Connecting cable U-Wave 06ADV380F USB Input Tool Direct cable (2 m) 5363 Holding bar 50 (12.7 x 6.35 ) Holding bar 50 ( x ) 0020 Holding bar 0 ( x ) Swivel clamp for Ø 4/ Ø 8 stem and dove tail 5363: , 0020: Metric L Mass Remarks [] [] [kg] ±0,03 2 x PRESET 355 1, ±0,07 1,3 16,8 Consumable spares Battery SR
6 ABSOLUTE Digimatic Height Gauge Series 570 This Digimatic height gauge is very precise and reliable, and offers you the following benefits: Its built-in ABSOLUTE linear encoder means you don t have to set the reference point at every power-on, improving reliability as over-speed errors cannot occur. Fine-adjustment gives you precise positioning. It comes with large and smooth-acting slider hand wheel for coarse- and fine-adjustments. A carbide-tipped scriber is provided. SPC data output. Functions Series 570 ORIGIN ZERO/ABS ON/OFF DATA/HOLD Low voltage alarm Data output Specifications Scale Max. response speed Digital step Battery life Display Delivered Refer to the list of the specifications. (excluding quantizing error) ABSOLUTE electrostatic linear encoder Unlimited 0,01 approx hours LCD, Character Height Including 1 battery, scriber and scriber clamp 05GZA033 Scriber clamp ( x ) 07GZA000 Carbide-tipped scriber ( x ) 80 length Digimatic cable (1 m) 0540 Digimatic cable (2 m) 02AZD70F Connecting cable U-Wave 06ADV380F USB Input Tool Direct cable (2 m) Holding bar 50 ( x ) Swivel clamp for Ø 4/ Ø 8 stem and dove tail Metric L A B C Mass [] [] [] [] [] [kg] ±0, ,6 4, ±0, ,1 6,4 Consumable spares Battery SR Large smooth slider handwheel Fits the hand comfortably Large clamp lever 238
7 Digimatic Height Gauge Double Column Type Functions Series 12 ZERO/ABS Preset (2 values) ±SWITCHING ON/OFF DATA/HOLD Low voltage alarm Data output Series 12 This is a high accuracy height gauge, and offers you the following benefits: Its double-column structure ensures high measuring accuracy. A carbide-tipped scriber is provided. Large character height of 11 provides good readability. SPC data output. Specifications Refer to the list of specifications. (excluding quantizing error) Max. response 500 /s speed Digital step 0,01/0,005 Battery life approx hours Display LCD, Character Height: 11 Delivered Including scriber, scriber holder, 1 battery and cover 05GZA033 Scriber clamp ( x ) 07GZA000 Carbide-tipped scriber ( x ) 80 length Cover Cover Cover Digimatic cable (1 m) 0540 Digimatic cable (2 m) 02AZD70F Connecting cable U-Wave 06ADV380F USB Input Tool Direct cable (2 m) Holding bar 50 ( x ) Swivel clamp for Ø 4/ Ø 8 stem and dove tail 5363 Metric Mass [] [kg] ±0,02 4, ±0,05 8, ±0,07 15, (32) 63 (70) (802) ø15 (ø20) 33 (38) (54) (120) 135 (180) 0-0 (0-0 )
8 Digimatic Height Gauge Double Column Type with Touch Trigger Probe Connector Series 12 Carbide-tipped long scriber is provided. Double-column structure ensures high measuring accuracy Bidirectional touch-trigger probe is an optional accessory. It can quickly and accurately measure steps as well as inside and outside dimensions. Functions Series 12 ZERO/ABS Preset (2 values) ±SWITCHING ON/OFF DATA/HOLD Probe tip diameter compensation Touch-trigger probe Low voltage alarm Data output Specifications Max. response speed Repeatability Digital step Battery life Display Delivered Refer to the list of specifications. (excluding quantizing error) 500 /s 0,01 0,01/0,005 approx hours LCD, Character Height: 11 Including scriber, scriber holder, 1 battery and cover Metric Mass [] [kg] ±0,02 7, ±0,04, ±0,06 1, GZA033 Scriber clamp ( x ) Carbide-tipped scriber ( x ) 150 length Cover Cover Cover Digimatic cable (1 m) 0540 Digimatic cable (2 m) 02AZD70F Connecting cable U-Wave 06ADV380F USB Input Tool Direct cable (2 m) Bidirectional touch-trigger probe metric Holding bar 50 ( x ) 0020 Holding bar 0 ( x ) Swivel clamp for Ø 4/ Ø 8 stem and dove tail (54) 84 5 (802) Consumable spares Battery SR ø ø (120) 14 (180) (0-0 )
9 Spare Parts for Height Gauges for Height Gauges These are optional accessories and spare parts for height gauges, that you can use for different tasks. Various accessories are available for using height gauges in different applications. Hard-wearing carbide-tipped scribers are available for all height gauges. 07GZA GZA Carbide-tipped scribers Applicable height gauges Description 12-1, , , GZA , , Carbide tipped scriber 514-2, 514-4, ( x ) 80 length 570-2, , , Carbide tipped scriber ( x ) 150 length Carbide tipped scriber (12,7 x 6,35 ) 47 length Carbide tipped scriber (16 x ) 144 length Scriber clamps Applicable height gauges Description Scriber clamp (16 x ) 07GZA , , Scriber clamp with plastic screw (12,7 x 6,35 ) 12-1, , , , , GZA , , Scriber clamp 514-2, 514-4, 514-6, ( x ) ,
10 Optional Accessories for Height Gauges for Height Gauges These are optional accessories and spare parts for height gauges, that you can use for different tasks. Various accessories are available for using height gauges in different applications. Hard-wearing carbide-tipped scribers are available for all height gauges. Center master Applicable height gauges Remarks , Center master 12-6-, , , (12,7 x 6,35 ) , , , , , , , , , , , , 514- Center master ( x ) Center master Depth measurement attachement Applicable height gauges Remarks 12-1, , , , , , 514-3, 514-4, 514-5, 514-6, Depth measurement attachment 570-2, ( x ) , , , , , , , Depth measurement attachment (12,7 x 6,35 ) Depth Gage Attachment Electrical contact sensor Applicable height gauges For all height gauges on a granite surface plate. For electroconductive parts with a sufficient contact surface. Electrical contact sensor
11 QM-Height Specifications Repeatability 1,8 µm (±2ơ) ±(2,4+2,1L/0) µm L = Measuring length () Scale ABSOLUTE electromagnetic inductive Measuring force 1,5 ± 0,5 N Drive method Manual Guiding Roller bearing method Digital step 0,001/0,005; Power supply alkaline battery size AA LR6 (4pcs.), rechargeable battery size AA Ni-MH (4pcs.), AC-Adapter (optional) Battery life Approx. 0h (without air floating) Approx. 80h (with air floating) Measuring 1D measurement: height function diameter, pitch, Max/Min/TIR (Max-Min), tolerance, preset, data memory Display TN monochrome LCD Series 518 This is a high precision ABSOLUTE digital height gauge that offers you the following benefits: It has a high accuracy, high resolution ABSOLUTE linear encoder for position detection. Types with and without pneumatic drive mechanism Automatic running of prelearnt part programs You can easily implement frequently used measurements, such as inside/outside diameter and pitch calculations, by icon-based coands that also support easy one-key operation. Extraordinary battery life GO/±NG judgement is performed by setting the upper and lower tolerances. Display is mounted fixed to the housing for more comfortable usage. Probe moves independently during measurements batteries LR6 (AA) 12AAA715 Setting block 05HZA148 Ball offset probe Ø Digimatic cable (1 m) Digimatic cable (2 m) 02AZD70D Connecting cable U-Wave 06ADV380D USB Input Tool Direct cable (2 m) 02AZE0 U-WAVE-T installation Kit for QMH 06AEG180D AC Adapter 6V DC, 2A MAX MINI MAX MIN Application example of QM-Height with air floating Perpendicularity Air floating Mass [] [kg] /0-465* 7µm no /0-715* 12µm no /0-465* 7µm yes /0-715* 12µm yes * with probe turned to upward position 05HZA148 Small Tools Linear QM-Height brochure on request Holder for U-WAVE transmitter GO NG 243
12 Optional Accessories for QM-Height Series 518 QM-Height 12AAF AAB AAF667 Ø2 spherical measuring insert (coaxial Ruby ball Ø2 spherical measuring insert (coaxial Ø3 spherical measuring insert (coaxial Ø4 spherical measuring insert (coaxial 12AAB552 Ø spherical measuring insert (coaxial Ø14 disk measuring insert Ø20 disk measuring insert 12AAA788 Ø4 spherical measuring insert (eccentric 12AAA78 Ø6 spherical measuring insert (eccentric 12AAC072 Depth probe 12AAA72 Holder; for Dial Gage for Ø 8 stem 12AAA73 Holder; long Ø 6 collar 12AAA788 12AAA AAC072 12AAA72 (with optional indicator) 12AAA73 (with optional measuring insert) 244
13 Specifications 0-72 Slider stroke 0 (1,1 + 0,6L/0) µm L = length () Perpendicularity 5 µm (after compensation) Straightness 4 µm (mechanical) Language for English/German/French/Spanish/ display Italian/Dutch//Portuguese/ Swedish/Turkish/Czech/ Hungarian/Slovenian/Polish/ Traditional Chinese (optional)/ Japanese Drive method Manual/motor (5-40 /s, 7 steps) Suspension method Full/semi-floating with built-in air compressor Balancing method Counter balance of stored 50 programs (max.) programs of stored 000 (max.) data Battery operation approx. 5 hours time Probes See specific chapter on Probes Measuring force Digital step Display 1 N 0,0001/0,001/0,01/0,1 Graphic LCD 320x240 dots (with back light) 12AAA715 Setting block 12AAF634 Eccentric probe Ø 5 12AAF712 Battery Pack Cover AC Adapter 12V Linear Height LH-0E/EG Series 518 This is a high performance 2D measurement system. The Linear Height Gauge LH-0E/EG offers you a huge range of features, including: Excellent accuracy. Pneumatic drive mechanism. Self-explanatory control pad with menu control in display. Easy-to-read LCD display. Automatic running of pre-learnt part programs. GO/± NG display at each measurement. Mains-independent operation with rechargeable battery. Easy handling with low weight. RS-232C data output port. USB Data output (for storing data only). DIGIMATIC data input for when using a digital indicator (e.g. when testing perpendicularity). Statistic processing ø () (65) D D-21 Small Tools Linear Height LH-0 brochure on request Remarks Mass [kg] D D-21 Power grip pre-installed
14 Optional Accessories for Linear Height Series 518 Ø 1 Ø,8 M 1,7 x 0,35 ø22 12AAC072 12AAF AAF AAB552 12AAF668 12AAF66 12AAF670 12AA (5,3) 45 11,2 Ø 1 (17) Ø 8 12AAF672 12AAF673 12AAA788 12AAA ø M2 ø24 12AAC ø14 12AAA73 (with optional measuring insert) 47 ø 8 M AAA72 (with optional indicator) 12AAB136 ø 8 1. Probe diameter calibration block 12AAA787 Probe diameter calibration block (applicable to tapered probe) 2. Depth measurement 12AAC072 Depth probe 3. Interchangeable measuring insert (or stylus) for eccentric probe (standard accessory) 12AAF666 Ø1 spherical measuring insert (coaxial Ø2 spherical measuring insert (coaxial 12AAF667 Ø2 spherical measuring insert (coaxial Ruby ball Ø3 spherical measuring insert (coaxial Ø4 spherical measuring insert (coaxial 12AAB552 Ø spherical measuring insert (coaxial 12AAF668 Ø spherical measuring insert (coaxial L=82 12AAF66 Ø spherical measuring insert (coaxial L=120 12AAF670 Ø5 disk measuring insert 12AAF671 Ø disk measuring insert Ø14 disk measuring insert Ø20 disk measuring insert 12AAF672 Ø1 spherical measuring insert (eccentric 12AAF673 Ø2 spherical measuring insert (eccentric 12AAA788 Ø4 spherical measuring insert (eccentric 12AAA78 Ø6 spherical measuring insert (eccentric Ø 6 collar Shank with M2 thread for CMM stylus Shank with M3 thread for CMM stylus 4. Special holder, special probe 12AAC073 Tapered measuring insert (Ø22 ) 12AAA72 Holder; for Dial Gage for Ø 8 stem 12AAA73 Holder; long 12AAB136 Probe; Ø cylincrical universal 5. Others 12AAF674 Auxiliary weight K65086 Box probes 6. Printer and interface 12AAN052 Printer paper for receipt printer ( rolls pack) 12AAA804 Printer cable; 2m (for A4 printer) 12AAA807D RS-232C cable (2m) 12AAN050 Receipt printer (for EU; except UK) 7. Battery 12AAF712 Battery Pack Recoended model for A4 printer: EPSON LQ-50 K65086: holder M3/disk probe Ø 12 / ruby ball probe Ø 1, 2, 3, 4 /extension, 20 K AAN
15 Quick Guide to Precision Measuring Instruments Nomenclature Vernier Height Gage Height Gages Mechanical Digit Height Gage Fine adjuster for main scale Beam Column Strut Main pole Sub pole Column Main scale Locking device Slider Vernier scale Stylus clamp Measuring and scribing stylus Scribing stylus Measuring face, stylus Fixing device Fine adjustment device Clamp Locking device Probe extension Feed handle Slider Measuring and scribing stylus Stylus clamp Scribing stylus Measuring face, stylus Fixing device Reset button Counter, upward Counter, downward Hand-pointer Dial face Reference surface, beam Reference surface, base Base Reference surface, base Base Digimatic Height Gages Strut Main pole Sub pole Column Feed handle Slider Touch probe connector Measuring and scribing stylus Battery cap Stylus clamp Scribing stylus Preset mode, ball diameter compensation mode button Power ON/OFF key Zero set button / ABS (Absolute) button Hold / data button Number up/down button, presetting Direction switch / digit shift button, presetting Digimatic data socket Measuring face, stylus Fixing device Base Reference surface, base Slider handwheel Slider clamping lever Ergonomic base 247
16 l f 0 How to read Vernier Height gage Vernier scale Graduation (1) Main scale 7 (2) Vernier 0.36 Reading (1) Main scale General notes on use of Height Gages 1. Potential causes of error Like the caliper, the error factors involved include parallax effects, error caused by excessive measuring force due to the fact that a height gage does not conform to Abbe's Principle, and differential thermal expansion due to a temperature difference between the height gage and workpiece. There are also other error factors caused by the structure of the height gage. In particular, the error factors related to a warped reference edge and scriber installation described below should be studied before use. 2. Reference edge (column) warping and scriber installation Like the caliper, and as shown in the following igure, measurement errors result when using the height gage if the reference column, which guides the slider, becomes warped. This error can be represented by the same calculation formula for errors caused by nonconformance to Abbe's Principle. f = h = h a h Installing the scriber (or a lever-type dial indicator) requires careful consideration because it affects the size of any error due to a warped reference column by increasing dimension h in the above formula. In other words, if an optional long scriber or lever-type dial indicator is used, the measurement error becomes larger. Example: Effect of measuring point position When h is 150, the error is 1.5 times larger than when h is Lifting of the base from the reference surface When setting the scriber height from a gauge block stack, or from a workpiece feature, the base may lift from the surface plate if excessive downwards force is used on the slider, and this results in measurement error. For accurate setting, move the slider slowly downwards while moving the scriber tip to and fro over the gauge block surface (or feature). The correct setting is when the scriber is just felt to lightly touch as it moves over the edge of the surface. It is also necessary to make sure that the surface plate and height gage base reference surface are free of dust or burrs before use h h a Mechanical Digit Height gage Measuring upwards from a reference surface Scribing stylus Reference surface Scribing stylus Measuring downwards from a reference surface Reference surface Counter 124 Notes on using the height gage Counter 122 Dial Reading Dial Reading Relationship between accuracy and temperature Height gages are made of several materials. Note that some combinations of workpiece material, room temperature, and workpiece temperature may affect measuring accuracy if this effect is not allowed for by performing a correction calculation. 5. The tip of a height gage scriber is very sharp and must be handled carefully if personal injury is to be avoided. 6. Do not damage a digital height gage scale by engraving an identiication number or other information on it with an electric marker pen. 7. Carefully handle a height gage so as not to drop it or bump it against anything. 1. Keep the column, which guides the slider, clean. If dust or dirt accumulates on it, sliding becomes dificult, leading to errors in setting and measuring. 2. When scribing, securely lock the slider in position using the clamping arrangements provided. It is advisable to conirm the setting after clamping because the act of clamping on some height gages can alter the setting slightly. If this is so, allowance must be made when setting to allow for this effect. 3. Parallelism between the scriber measuring face and the base reference surface should be 0.01 or better. Remove any dust or burrs on the mounting surface when installing the scriber or lever-type dial indicator before measurement. Keep the scriber and other parts securely ixed in place during measurement. 4. If the main scale of the height gage can be moved, move it as required to set the zero point, and securely tighten the ixing nuts. 5. Errors due to parallax error are not negligible. When reading a value, always look straight at the graduations. 6. Handling after use: Completely wipe away any water and oil. Lightly apply a thin coating of anti-corrosion oil and let dry before storage. 7. Notes on storage: Avoid direct sunlight, high temperatures, low temperatures, and high humidity during storage. If a digital height gage will not be used for more than three months, remove the battery before storage. If a protective cover is provided, use the cover during storage to prevent dust from adhering to the column. 248
Height Gauges Pages Data Processing Height Gauges Pages
Height Gauges Height Gauges Pages 232-240 Data Processing Height Gauges Pages 241-244 for sale to the United Kingdom only. All products are intended to be sold to coercial customers. Therefore VAT is not
More informationLinear Height LH-600E SERIES 518 High-Performance 2D Measurement System
Linear Height LH-0E SERIES 518 High-Performance 2D Measurement System Excellent accuracy of (1.1+0.6L/0)µm with 0.1µm/0.5µm resolution/repeatability. Perpendicularity (frontal) of 5µm and straightness
More informationQM-HEIGHT SERIES HIGH-PERFORMANCE HEIGHT GAGE PRE1424 SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT
QM-HEIGHT SERIES HIGH-PERFORMANCE HEIGHT GAGE SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT PRE1424 High-Performance Height Gage QM-Height Series Very high accuracy ±(2.4+2.1L/600) μm Built-in air levitation
More informationQM-HEIGHT SERIES HIGH-PERFORMANCE HEIGHT GAUGE PRE1424(2) SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT
QM-HEIGHT SERIES HIGH-PERFORMANCE HEIGHT GAUGE SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT PRE1424(2) High-Performance Height Gauge QM-Height Series Best-in-class accuracy ±(2.4+2.1L/600)μm Built-in air
More informationHeight Gage A standard measuring tool of industry
Height Gage A standard measuring tool of industry igimatic Height Gage SERIES 12 Multi-function Type with SPC ata Output ouble-column structure ensures high measuring accuracy. Ergonomic base fits comfortably
More informationHeightmatic SERIES 574 High Precision Height Gage
Height Gages Heightmatic 159 Digimatic Height Gage 160 ABSOLUTE Digimatic Height Gage 162 Dial Height Gage 164 Vernier Height Gage 166 CERA Caliper Checker 168 Carbide-tipped Scriber 169 Optional Accessories
More information1D/2D Measuring Gage LINEAR HEIGHT
Small Tool Instruments and Data Management 1D/2D Measuring Gage LINEAR HEIGHT CATALOG No. E4162-518 World-class accuracy, cost effective, ergonomic design and optional large-capacity battery pack plus
More informationHigh Performance 2D Measurement System
Small Tool Instruments and Data Management High Performance 2D Measurement System Catalog No.E12012 World's best-in-class accuracy 2D measurement system A sophisticated height gage offering exceptional
More informationHeight Gage A standard measuring tool of industry
Height Gage A standard measuring tool of industry inear Height SERIES 518 High Performance 2 Measurement System Excellent accuracy of (1.1+0.6/600)μm with 0.1μm/0.4μm resolution/repeatability. High-accuracy
More informationDigimatic. Height Gages. Linear Height. Depth Gages. SuperCaliper ABSOLUTE. Coolant Proof Caliper. ABSOLUTE Digimatic Caliper ABSOLUTE
D Small Tool Instruments and Data Management Digimatic Caliper Digimatic Height Gages Linear Height Depth Gages SuperCaliper ABSOLUTE Coolant Proof Caliper ABSOLUTE Digimatic Caliper ABSOLUTE Digimatic
More informationLINEAR HEIGHT LH-600 PRE 1286(2) 1-D / 2-D
Small Tool Instruments and Data Management LINEAR HEIGHT LH-600 PRE 1286(2) 1-D / 2-D height gage with the highest level of precision worldwide (1.1+0.6L/600) μm Linear Height is a multi-functional height
More informationHigh Performance 2D Measurement System LINEAR HEIGHT
High Performance 2D Measurement System LINEAR HEIGHT World's best-in-class accuracy 2D measurement system A sophisticated height gage offering exceptional accuracy of (1.1+0.6L/600)μm* (* L = measured
More informationDigimatic Caliper. Digimatic Height Gages. Linear Height. Depth Gages. New Products. SuperCaliper ABSOLUTE. Coolant Proof Caliper ABSOLUTE
Small Tool Instruments and Data Management Digimatic Caliper Digimatic Height Gages Linear Height Depth Gages New Products SuperCaliper ABSOLUTE Coolant Proof Caliper ABSOLUTE Digimatic Caliper INDEX Caliper
More informationThickness Gages SERIES 547, 7
Thickness Gages SERIES 547, 7 Thickness Gages offer a quick and efficient means of inspection with their convenient grip handle, thumb trigger and springloaded spindle. The various models cover a wide
More informationPRECISION MEASURING INSTRUMENTS
PRECISION MEASURING INSTRUMENTS STANDARD GAGE PROFESSIONNEL MEASURING INSTRUMENTS AFFORDABLE TO EVERYONE The instruments of the STANDARD GAGE product line were created to satisfy the clients on their query
More informationSTANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
More informationHigh-Performance Height Gage QM-Height Series SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT
High-Performance Height Gage QM-Height Series SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT Best-in-class accuracy ±(2.4+2.1L/600)μm Built-in air-suspension feature mechanism using an internal pump enables
More informationHEIGHT GAUGES. Moore & Wright Vernier Height Gauge 190 Series. Digital Mini Height Gauge 192 Series. Partners in Precision
Moore & Wright Vernier Height Gauge 190 Series Zero reference point can be adjusted for calibration Hardened stainless steel beam Measuring faces are micro-lapped for high accuracy Chrome plated scale
More informationIndicator not included
Baty Dual Plane Digital Height Gauge Range up to 0-600mm Measures offset components Can be used as an ordinary digital caliper Easy to use clear readout Large ground face to ensure component square when
More informationPROMOTION! From 1st October to 31st December MITUTOYO PROMOTION
PROMOTION! From 1st October to 31st December 2017. MITUTOYO PROMOTION GET MEASURLINK 8 SOFTWARE! MeasurLink is an easy-to-use, data collection and real-time statistical process control suite. Real-Time
More informationNew. Digimatic Height Gage. Digital Height Gage. Height gages feature improved ease of operation and enhanced functionality
Small Tool Instruments and Data Management Digital Height Gage Digimatic Height Gage Bulletin No.150 New New 12" model24" model 40" model Height gages feature improved ease of operation and enhanced functionality
More informationABSOLUTE AOS DIGIMATIC CALIPER
ABSOLUTE AOS DIGIMATIC CALIPER Equipped with AOS (Advanced Onsite Sensor) induction type encoder SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT The NEW Generation ABSOLUTE AOS Digimatic Caliper A new series
More informationLinear Gages Pages 414, 415, 420 to 42. Counters and Displays Pages 416 to 419, 426 to 428, 430. Laser Hologage Pages 431, 432
Linear Gages Sensorpak Page 412 Linear Gages Pages 414, 415, 420 to 42 Counters and Displays Pages 416 to 419, 426 to 428, 430 Laser Hologage Pages 431, 432 LITEMATIC Motorized low force high precision
More informationNew Products. Small Tool Instruments and Data Management INDEX. Micrometers. Micrometer Heads. Coolant Proof. Micrometer. Digimatic.
Small Tool Instruments and Data Management Micrometers Micrometer Heads New Products Coolant Proof Micrometer Digimatic Micrometer Ratchet Thimble Micrometer Digimatic Spline Micrometer Fine Pitch Micrometer
More informationHeight Gauges. Height Gauges K-1
Height Gauges K-1 Made To Measure in the Course of the Manufacturing Process Height gauges perform one-dimensional measurements on a surface plate, preferably in granite. TESA-µHITE we offer to you in
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Head with spindle clamp INDEX Micrometers
More informationCalipers Height Gauges Depth Gauges
Calipers Height Gauges epth Gauges Calipers Height Gauges epth Gauges CONTENTS Calipers IP67 Solar SuperCaliper -3 IP67 Caliper -5 Caliper -7 Long Beam Caliper -9 Solar Caliper -10 Vernier Caliper -11
More informationDepth Micrometer SERIES 329, 129, 229 Interchangeable Rod Type
epth Micrometer SERIES 329, 129, 229 Interchangeable Rod Type ø4mm interchangeable rods, with lapped measuring end, provide a wide measuring range in mm increments. Ratchet stop provides constant force.
More informationV-Anvil Micrometers SERIES 314, Flutes and 5 Flutes
V-Anvil Micrometers SERIES 314, 114 3 Flutes and 5 Flutes Measures the outside diameter of cutting tools (such as taps, reamers, end mills) which have three or five flutes. With Ratchet Stop for constant
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Heads fine spindle feed INDEX Micrometers
More informationBore Gages SERIES 526 for Extra Small Holes
Bore Gages SERIES 526 for Extra Small Holes These Bore Gages measure diameters of small holes. The radial displacement of split-ball contact is converted to axial displacement of measuring rod, which is
More informationMu-checker To support building the system with automatic measuring unit or dedicated gages
7 24 7 3.5 16 Mu-checker To support building the system with automatic measuring unit or dedicated gages SERIES 519 Mu-checker (Electronic micrometer) Probes (Lever head / Cartridge head) Lever heads Order
More informationi-checker SERIES 170 SPECIFICATIONS DIMENSIONS F-54
i-checker SERIES 170 EATURES The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke of up to 100mm (4"). ±(0.2+L/100)µm
More information0-1 /0-25mm Optional Accessories MSLP SALE 05CZA662 SPC cable (40 / 1m) $ $ CZA663 SPC cable (80 / 2m) $ $133.
Winter 2012 Prices effective from Jan. 3 to Apr. 30, 2012 New Year Sale Featuring Mitutoyo Precision Measuring Tools & Instruments Cable #02AZD790B Coolant Proof Micrometers - Ratchet Stop Range Order
More informationmm range nonius mm/inch mm range nonius mm/inch
Measuring tools Vernier Calipers MIB Messzeuge Germany Precision micrometers Dial indicators Dial supports Magnetic dial supports Digital thickness gauges Precision inside micrometers Vernier caliper standard
More informationHoltest ABSOLUTE. Borematic. Inside Micrometers. Bore Gages. Digimatic. Holtest. Absolute Borematic. Digimatic Inside Micrometer. Digimatic Bore Gage
C Small Tool Instruments and Data Management Holtest ABSOLUTE Borematic Inside Micrometers Bore Gages Digimatic Holtest INDEX Holtest Digimatic Holtest C-2, 3 Holtest C-4, 5 Holtest (Type II) C-6, 7 Borematic
More informationMICRO-HITE 350 / 600 / 900 Height Gages MICRO-HITE main instruments 350 / 600 / 900
Two-dimensional measurement operations are efficient and cost-effective with the MICRO-HITE Electronic Height Gage. The MICRO-HITE Electronic Height Gage measures in two dimensions in either rectangular
More informationMicrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
More informationDigital Indicators 1075 / 1080 / Features. Technical Data IP MarCator. Digital Indicators
- 5-38 Digital Indicators 175 / 18 / 181 IP51 Features Functions: ON/OFF (Set display to zero) mm/inch Reversal of counting direction PRESET (for entering a numerical value) DATA (data transmission with
More informationElectronic calipers Dial calipers Vernier calipers. External micrometers Internal micrometers Depth micrometers
CONTENT Calipers Electronic calipers Dial calipers Vernier calipers Depth calipers Special purpose calipers Calipers accessories A Micrometers External micrometers Internal micrometers Depth micrometers
More informationDepth Gage A standard measuring tool of industry
epth Gage standard measuring tool of industry epth Micrometer SERIES 329, 129 Interchangeable Rod Type This type uses interchangeable rods to enable wide-range measurement. Order Nos. 329-250-30, 329-251-30,
More informationHOLTEST / BOREMATIC. Holtest Series micrometers make three-point / two-point bore diameter measurements at top accuracy. Catalog No.
Small Tool Instruments and Data Management HOLTEST / BOREMATIC Catalog No. E12006 Holtest Series micrometers make three-point / two-point bore diameter measurements at top accuracy World Class, High Performance,
More informationMetrology. Jubilee campaign first half of Anniversary Gift. Vernier Caliper 100 mm. Exclusively available from specialized dealers
Metrology Anniversary Gift Vernier Caliper 100 Join the celebration and make sure to receive a caliper with our compliments Exclusively available from specialized dealers Jubilee campaign first half of
More informationAuxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320
Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320 319 Gauge Stand with Hardened Steel Anvil Series 7 Standard
More informationData Sheet: LDS 1367 Date:
Product: Electronic Digital Measuring Set Page 1 of 5 Digital Caliper and Electronic Micrometer Set Set contains: 1 x Electronic Caliper: 150mm/6 1 x Electronic Micrometer: 0-25/0-1 mm Housed in a fitted
More informationMicrometers. Micrometer Heads
B Small Tool Instruments Micrometers Micrometers Heads Micrometers Micrometer Heads MDC Micrometer MDH Micrometer QuantuMike Digimatic Outside Micrometer Micrometer Head with spindle clamp INDEX Micrometers
More informationMITUTOYO CANADA INC. PRECISION TOOL SALE
MITUTOYO CANADA INC. PRECISION TOOL SALE Winter 2016 Prices in effect: Jan 4 to Mar 31, 2016 MITUTOYO WORKSHOP DATES & TOPICS FOR 2016 Join us for FREE half day workshops each month. Workshops begin with
More informationHorizon Premium. Length Measuring and Setting Instrument. The new Trimos Horizon Premium
410 Horizon Premium Length Measuring & Setting Instrument The new Trimos Horizon Premium Length Measuring and Setting Instrument fulfills todays requirements of high accuracy quality control equipment.
More informationPrecision Bench Centres Page 338. Universal Bevel Protractors Pages 339 to 341, 357. Steel Squares and Rules Pages 342 to 346
Stands and Bench Tools Stands Pages 325 to 331 Magnetic Stands Pages 332 to 337 Precision Bench Centres Page 338 Universal Bevel Protractors Pages 339 to 341, 357 Steel Squares and Rules Pages 342 to 346
More informationLinear Gauge Application Examples Page 381. Digimatic Linear Gauge Page 383. Incremental Linear Gauge Page 389
Linear Gauge Application Examples Page 381 SENSORPAK Page 382 Digimatic Linear Gauge Page 383 Incremental Linear Gauge Page 389 Linear Gauge with Reference Point Page 397 Laser Hologage Page 399 Motorized
More informationDIAL GAUGES. K-1
DIAL GAUGES K-1 IP65 Digital Indicator IP65 Protection Level, against liquids. With large digital display. Preset function. ABS/INC. Tolerance setting and indication. Metric/inch conversion. Data output
More informationCALIBRATION. Sylvac Dial Gauge Calibrator
Sylvac Dial Gauge Calibrator The Sylvac stand is custom designed for calibrating all types of dial gauges, lever indicators and transducers. It utilises a 25mm / 1" travel Sylvac probe linked to a digital
More informationMarCator. Dial and Digital Indicators
MarCator. Digital and Dial Indicators MarCator. Dial and Digital Indicators Digital Indicators Overview 5-2 MarCator 175 R Standard versions with digital display 5-4 MarCator 186 R / 186 WR With tolerance
More informationDIGITAL INDICATORS S_DIAL
DIGITAL IDICATORS S_DIAL The electronic indicators are equipped with a linear sensor and an engraved scale glued on the measuring spindle. A sensor replaces the gears. The analogic display is transformed
More informationd for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected absolute system S_Connect Proximity
HAND TOOLS In 1981, Sylvac launches the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Sylvac did not remain
More informationPRECISION TOOL SALE SPRING 2018
PRECISION TOOL SALE SPRING 2018 Effective April 2nd - June 29th 2018 While quantities last. Some items may not be exactly as shown. FOLLOW US. LIKE US Distributed By: 2 Outside Micrometers Outside Micrometers
More informationHigh-resolution Digimatic Measuring Unit LITEMATIC
Sensor Systems High-resolution Digimatic Measuring Unit LITEMATIC Catalog No. E4244-318 Ultra-low measuring force, high accuracy and superb resolution make an unbeatable combination High accuracy & low
More informationVECTRA-TOUCH
179 introduction The «Vectra-Touch» height measuring instruments are of universal use in any production field. They are the result of 30 years of experience in development and manufacturing. This experience
More informationDO YOU WANT TO AIM EVEN HIGHER? FOR THIS THERE IS DIGIMAR.
- DO YOU WANT TO AIM EVEN HIGHER? FOR THIS THERE IS DIGIMAR. Mahr offers you the complete product program in order for you to obtain the most reliable solution for all your measuring tasks. Whether it
More informationDIGIMATIC MICROMETER. High Accuracy and 0,1 µm digital step PRE1491 SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT
DIGIMATIC MICROMETER High Accuracy and 0,1 µm digital step SMALL TOOL INSTRUMENTS AND DATA MANAGEMENT PRE1491 HIGH ACCURACY World's First 0.1 μm* Resolution Micrometer *0.1 µm=0.0001 mm "d2" is a generic
More informationSummer Promo Precision Tool & Instruments Prices effective July 1st through Sept. 30th, Unless noted otherwise
S u m m e r 2 0 1 4 S p e c i a l s Summer Promo 2014 Precision Tool & Instruments Prices effective July 1st through Sept. 30th, 2014. Unless noted otherwise Season 2014 S u m m e r 2 0 1 4 S p e c i
More informationJSR GROUP. Profile Projector. PJ-A3000 SERIES 302 Profile Projectors
PJ-A3000 SERIES 302 s The PJ-A3000 Series profile projectors are medium-size models that feature excellent versatility and easy operation. Easy-to-read digital XY counter is located near the projection
More informationNEW WEBSITE SPC WW.INSIZE-UUSA.COM OMING SSOON! QUALITY INNOVATION SERVICE VALUE SERIALIZED TOOLS ONE-YEAR WARRANTY FITTED CASES. Electronic Calipers
Precision Measuring Instruments Instrument s QUALITY Electronic Calipers INNOVATION SERVICE EDP # Item # VALUE 0-6/0-150 817000 1108-150 0-8/0-200 817001 1108-200 80.00 SERIALIZED TOOLS 0-12/0-300 817002
More informationEvery tool comes with Certificate of Inspection (see back for details)
Every tool comes with Certificate of Inspection (see back for details) Promotion Ends 8/31/2010 11 Standard Gage Electronic Calipers with Thumbwheel Stainless steel frame Thumbwheel for rapid setting Direct
More informationDIGITAL HEIGHT GAUGE OPERATION AND MAINTENANCE MANUAL
OPERATION AND MAINTENANCE MANUAL Before operating the instrument, please read the manual thoroughly, and retain it for future reference. IMPORTANT! Do not use the instrument near a high-voltage or magnetic
More informationSAVER ZONE WINTER FLYER 2014 SUPER BORE GAUGE SET BORE GAUGE ABSOLUTE DIGIMATIC CALIPER. Quality products from a brand you can trust.
WINTER FLYER 2014 Prices in effect from Jan. 2 to Apr. 30, 2014 or as otherwise noted, while quantities last. Some items may not be exactly as shown. Distributed by BORE GAUGE SET BORE GAUGE Gauge stem
More informationMICROMETERS. Traditional External Micrometer 1961 Series. Traditional External Micrometer 1965 Series. For more information visit
Traditional External Micrometer 1961 Series Standard: BS870, DIN 863/1, ISO361 All models feature Tungsten carbide measuring faces 6.5mm spindle diameter Speeder type ratchet Locking lever Choice of standard
More informationInside Micrometers. Bore Gages
Holtest ABSOLUTE Borematic Holtest ABSOLUTE Borematic Inside Micrometers Inside Micrometers Small Tool Instruments Inside Measurement INDEX Holtest Digimatic Holtest -3 Holtest -7 Holtest (Type II) -11
More informationDigimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type
Digimatic Caliper Gages SERIES 209 Internal Tube Thickness Measurement Type Versatile ID measuring gages for hole diameters, groove thickness, tube diameter, and hard-to-reach dimensions. The Digimatic
More informationABS Digimatic Indicator ID-C
Small Tool Instruments and Data Management Standard Digital Indicator ABS Digimatic Indicator ID-C Catalog No. E40-54 Digital indicators offer dramatically improved readability, usability and functionality
More informationMeasuring instruments
Vernier calipers 26804 Stainless steel - DIN 862 Range Jaw Nonius /inch 135 40 1/20-1/128 160 40 1/20-1/128 180 40 1/20-1/128 Until end of stock 26808 Stainless steel, chrome satin finish - DIN 862 Range
More informationHUGE SAVINGS! LIMITED TIME ONLY!
Valid from Aug. 17, 2015 to Dec. 31, 2015 Prices Subject to Change Without Notice & Stock Availability. Mitutoyo Savings! Dial Calipers - Series 505 Resolution:.001 Extra-rigid main beam Sliding surfaces
More informationPolarization Microscope. Omano OM349P Series. User Guide
Polarization Microscope Omano OM349P Series User Guide Table of Contents Getting Started... 3 Components... 3 Technical Specifications... 5 Setup Instructions... 6 Basic Operation... 7 Changing the Light
More informationi-checker SERIES 170 Inspection Instrument for Dial Indicator
i-checker SERIES 170 Inspection Instrument for Dial Indicator The i-checker is specially designed to calibrate dial indicators, dial test indicators, and other electronic comparison gage heads with a stroke
More informationMITUTOYO MEASUREMENT SOLUTIONS!
Action valid from 1st June to 30th June 2014. We reserve the right to make technical changes and developments; these prices only apply to business customers; all prices are understood to be net prices
More informationHEIGHT GAUGE Hi_Cal 150 / 300
HEIGHT GAUGE 150 / 300 Especially developed and optimized for use in production lines, HI_CAL offers a great efficiency thanks to its large screen which can simultaneously display diameters and centerlines.
More informationDial gauges Electronic and Analogue
Dial gauges Electronic and Analogue 1F-1 Dial gauges Electronic and Analogue EASY-TO-USE AND VERSATILE For more than 50 years we have been producing and distributing a wide range of easy-to-use and versatile
More informationCALIPERS. Workshop Vernier Caliper 100 Series. Workshop Vernier Caliper 105 Series. Features. Features
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with locking screw Made of hardened alloyed stainless steel Chromed scale with engraved graduations Packed in plastic box WORKSHOP
More informationABS Digimatic Indicator ID-C
Small Tool Instruments and Data Management Standard Digital Indicator ABS Digimatic Indicator ID-C Bulletin No. 1966 Digital indicators offer dramatically improved readability, usability and functionality
More informationPrecimar. PLM and CiM Universal Length Measuring Machines LENGTH MEASURING MACHINES FOR HIGH-END CALIBRATION
Precimar Precimar. PLM and CiM Universal Length Measuring Machines LENGTH MEASURING MACHINES FOR HIGH-END CALIBRATION Mahr's universal length measuring machines are designed for absolute and relative measurement
More informationFG-7000L Digital Force Gauge Operation Manual
FG-7000L Digital Force Gauge Operation Manual Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the unit is ON or OFF,
More informationU. pr. E Calibration group
of measuring and testing equipment easily ordered Primarily according to VDI/VDE/DGQ 2618 For many measuring and test devices a calibration logo with indication of a calibration group is stated. From the
More informationSPECIAL OFFERS 16,995 METROLOGY DIRECT 4,000. Micro-Vu Vertex 110 Vision Measuring System 2008 AUTUMN / WINTER PROMOTION
Micro-Vu Vertex 110 Vision Measuring System Comprises: Vertex 110 with 200x150x150mm measuring range Dell PC and 17 TFT monitor Windows XP Inspec automated vision software High resolution video system
More informationApplication Series Page. Electronic Indicators 900, 901, 903 E.2 E.3. Dial Indicators 450, 451, 458 E.4 E.5. Transducer Probes 971 E.
E Electronic Indicators, Dial Indicators, Digital Probes, Digital Readouts TABLE OF CONTENTS Application Series Page Electronic Indicators 900, 901, 903 E.2 E.3 Dial Indicators 450, 451, 458 E.4 E.5 Transducer
More informationMetrology CONTENTS BRANDS. Page. Digital Calipers. Depth Gauges Digital depth gauges Micrometers
800 SECTION H Metrology Cutwel s metrology range from Mahr, Insize and JBO provides high quality measuring, from basic hand tools to advanced digital measuring tools. All tools are available with UKAS
More informationPrecimar. PLM and CiM Universal Length Measuring Machines
24 Precimar. Precision Length Metrology Precimar. PLM and CiM Universal Length Measuring Machines LENGTH MEASURING MACHINES FOR HIGH-END CALIBRATION Mahr's universal length measuring machines are designed
More informationDigimatic Indicators. Dial Indicators. Dial Test Indicators. Dial Indicator Applications and Stands
Small Tool Instruments and Data Management ID-H Digimatic Indicators Dial Indicators Dial Test Indicators Dial Indicator Applications and Stands ID-C INDEX Digimatic Indicators ABSOLUTE Digimatic Indicator
More informationSHIMPO INSTRUMENTS. FG-7000T Digital Torque Gauge Operation Manual
FG-7000T Digital Torque Gauge Operation Manual SHIMPO INSTRUMENTS Operators should wear protection such as a mask and gloves in case pieces or components break away from the unit under test. Whether the
More informationCALIPERS. Workshop Vernier Caliper 100 Series. Large Workshop Vernier Caliper 150 Series. Partners in Precision
Workshop Vernier Caliper 100 Series Standard DIN 862 Standard workshop model with stop screw Assembly slider model 4-way measurement Made of hardened alloyed stainless steel Chromed scale with engraved
More informationMAHRLIGHTS. From j 215,-- SPRING PROMOTION. MarCator. Digital indicators with System PROMOTION PRICES VALID UNTIL 31 MAY 2012
+ MAHRLIGHTS MarCator. Digital indicators with System From j 215,-- SPRING PROMOTION PROMOTION PRICES VALID UNTIL 31 MAY 2012 2 Mahrlights. Spring Promotion MarCal. Digital Caliper 16 EWR with Reference
More informationMitutoyo General Catalog
Mitutoyo General Catalog Laser scan micrometer List of products Move to other products LSM-500H/501H/503H/506H/512H LSM-902/6900 1 SPC 2 Caliper 3 Depth gage 4 Height gage 5 Micrometer 6 Inside micrometer
More informationForm Measurement ROUNDTEST RA-1600
Form Measurement ROUNDTEST RA-1600 A new PC-compliant Roundness and Cylindricity form measuring instrument with extensive analysis features to enable measurement of a wide variety of workpieces. Powerful
More informationSliding Prices this Winter. Local Distributor. Supporting your. Large Workshop Vernier Caliper. Traditional Feeler Gauge Set.
Supporting your Local Distributor Large Workshop Vernier Caliper See page 2 for details. Traditional Feeler Gauge Set See page 12 for details. Digital Indicator See page 8 for details. Issue 44 Valid until
More informationYOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
More informationSurface Roughness Testing
Surface Roughness Testing J-1 Summary of Roughness Parameters Commonly Used Arithmetical mean deviation of the profile R a (ISO 4287, DIN 4768) The arithmetical mean deviation of the profile Ra is the
More information35016 Spare scriber, carbide-equipped.
35010 Surface Gauges Measuring and laying-out tools, gauges Without graduation, round base with smooth bottom, scriber with universal joint adjustable independent of the bar 35010 Scribing height Beam
More informationDOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR.
- s DOES EVERYTHING ROTATE AROUND PRECISION? NO PROBLEM WITH MICROMAR. Micrometers belong alongside calipers to the most frequently used hand measuring instruments. With their precision ground spindle,
More informationKvalitet skydelære inklusiv DKD certifikat! 700,00 kr
- + M A H R L I G H T S Tilbud gældende indtil 31. december 2009 Kvalitet skydelære inklusiv DKD certifikat! 700,00 kr MarCal 16 EX med rund eller rektangulær dybdemål til vores tilbudspris 565,00 kr,
More informationU.S. Promo PRECISION HAND TOOL PROMOTION
U.S. Promo 2017.3 PRECISION HAND TOOL PROMOTION Precision Tools 3600 ELECTRONIC INDICATORS Long battery life Plastic storage case with clear cover Large, easy-to-read LCD Zero setting in any position Reverse
More informationHEIGHT GAUGE Hi_Cal & Hi_Gage ONE
HEIGHT GAUGE & Hi_Gage ONE Specially developed and optimized for use in production lines, HI_CAL offers a great efficiency thanks to its large screen which can simultaneously display diameters and centerlines.
More information