Bending Tools. Bending
|
|
|
- Stephen Shields
- 5 years ago
- Views:
Transcription
1 ending Tools ending
2 ontents bout EHT Page 2 Tooling systems 3 EHT bending tools 4 Upper tool systems Standard upper tools: EHT head - 26mm Z-ending: EHT System Manual adapter: EHT head - 26mm Standard upper tools: Wila head - 20mm ottom tool systems EHT VarioTool: 60 x 60 mm (block die) EHT VarioTool: 90 x 90 mm EHT Standard: foot width 55 mm EHT Standard: foot width Standard adapter ccessories 24 E ES F PL RUS D 1
3 bout EHT In 1771, everything began with a hammer mill. In 1771, enlightenment was still in its infancy and Johann Wolfgang von Goethe wrote his Götz von erlichingen. nd in Teningen, the hammer mill started to manufacture equipment for agriculture and forestry. EHT is thus one of the oldest enterprises in Germany. Since 1950, EHT produces machine tools for sheet metal forming with the experience from and respect for the past, but with the future in mind and the ambition to improve. The experience of many years in the manufacture of standardised allround machines and complex, customized sheet metal bending solutions, highest demands on standards for the company s performance as well as professional advice and fair cooperation have always characterised the company EHT. nd this will remain the case in the future. Our range of press brakes: VarioPress MultiPress ProfiPress PowerPress 2
4 Tooling systems Upper tool clamping system: EHT manual - EHT pneumatic - EHT Wila hydraulic - ottom tool clamping system: EHT manual - 13/90 mm EHT pneumatic - 55 mm EHT hydraulic - EHT VarioV: EHT VarioV - manual EHT VarioV N-controlled Upper tool clamping system: EHT manual - EHT pneumatic - EHT hydraulic - EHT Wila hydraulic - EHT Wila Power hydraulic - ottom tool clamping system: EHT manual - EHT manual - 13/90 mm EHT pneumatic - 55 mm EHT VarioV - manual EHT VarioV N-controlled ProfiPress MultiPress EHT hydraulic - ProfiPress MultiPress VarioPress VarioPress PowerPress PowerPress 3
5 EHT bending tools Large surface tool holder for heavy load lear lettering with segment width, order number, max. load. Induction-hardened HR with min.hardening depth 1mm. Hardened area HR Material EHT Multi Toll: 42rMo 4V Standard sets of segmentation: The index parts 100mm in Set are designed as end pieces onla for top dies. Loose pieces on request! 4
6 The new EHT description for upper tools OWZ E026 H220 MT OWZ = Upper tool OWH = Upper tool holder OW = Upper tool apapter OW = Upper tool insert 01 = Tool form (overview see below) 002 = Tool with throat I000 = Without throat E026 = Receiver size H220 = Height (clamping incl.) MT = MultiTool = EHT standard tool VT = VarioTool = special tool OWZ = Upper tool OWH = Upper tool holder OW = Upper tool apapter OW = Upper tool insert
7 The new EHT description for bottom tools UWZ 01 V E090 H090 MT UWZ = ottom tool UWH = ottom tool holder UW = ottom tool adapter KWZ = Special tool 01 =Tool form (overview see below) V = lock die, MV = MultiV, VV = VarioV = 3 positions, 4 sides, 7 V-openings Z001 = ngle of the z-shape ( ) Z002 = ngle of the z-shape (90 ) E090 = Receiver size H090 = Height (clamping incl.) MT= MultiTool = EHT standard tool VT= VarioTool = special tool UWZ = ottom tool UWH = ottom tool holder UW = ottom tool adapter KWZ= Special tool 6
8 Standard upper tools: EHT head - 26mm Punch: OWZ E026 H220 MT R01,0-078 Drawing N : Max. box height: Radius: 110 t/m 38,0 kg/m mm 90 mm 2 mm 1,0 mm 78 F Punch: OWZ 02 I000 E026 H220 MT R03, Drawing N : Max. box height: Radius: 300 t/m 41,3 kg/m mm 90 mm 0 mm 3,0 mm F Punch: OWZ E026 H220 MT R00,6-086 Drawing N : Max. box height: Radius: 20 t/m 30,5 kg/m mm 90 mm 10 mm 0,6 mm F
9 Standard upper tools: EHT head - 26mm Punch: OWZ E026 H260 MT R01,0-078 Drawing N : Max. box height: Radius: 48 t/m 65,4 kg/m 260 mm 200 mm 1 40 mm 1,0 mm F Punch: OWZ E026 H220 MT R Drawing N : Max. box height: Radius: 55 t/m 47,0 kg/m mm 90 mm 1,0 mm 78 F Punch: OWZ E026 H220 MT R01,0-013 Drawing N : Max. box height: Radius: 44 t/m 30,0 kg/m mm 90 mm 2 mm 1,0 mm F
10 Standard upper tools: EHT head - 26mm Punch: OWZ 05 I000 E026 H240 MT R01,0-028 Drawing N : Max. box height: Radius: ending: 60 t/m 38,5 kg/m 240 mm 180 mm 105 mm 0 mm 1,0 mm 28 Folding: 80 t/m F Punch: OWZ 05 I000 E026 H340 MT R01,0-028 Drawing N : ending: 60 t/m 43,2 kg/m 340 mm 280 mm Folding: 80 t/m Max. box height: Radius: 175 mm 0 mm 1,0 mm F Punch: OWZ 05 I000 E026 H440 MT R Drawing N : Max. box height: Radius: ending: 60 t/m 55,5 kg/m 440 mm 380 mm 245 mm 0 mm 1,0 mm 28 Folding: 80 t/m Insert for holder OWZ 05 see page 14.
11 Upper tool holder: EHT head - 26mm Upper tool holder: OWH 08 I000 E026 H200 MT 10mm x 140 Drawing N : t/m 31,2 kg/m mm 140 mm E Insert width: Insert diameter: 0 mm 14,0 mm R07,5 - R14 Upper tool holder: OWH 02 I000 E026 H200 MT 25mm x 120 Drawing N : t/m 48,5 kg/m 200 mm E mm Insert width: Insert diameter: 0 mm 36,0 mm R10 - R25 Upper tool holder: OWH 04 I000 E026 H200 VT Drawing N : Insert width: 300 t/m 49,6 kg/m 200 mm 140 mm 0 mm 36,0 mm 2 x E For any other height or segmentation, special request. 10
12 Z-ending: EHT System Upper tool holder: OWH 03 I000 E026 H208 MT 23mm x 24mm Drawing N : Insert width: 100 t/m 34,2 kg/m 208 mm 148 mm 0 mm 23 x 24 mm D ottom tool holder: UWH 01 E055 H128 MT 23mm x 24mm Drawing N : t/m 25,0 kg/m D mm 55 mm Insert width: 55 mm 23 x 24 mm Z-ending inserts: KWZ 01 Z030 W090 VT 11 Z- α : pprehension: 100 t/m OWZ: 40,0 kg/m 3,0 mm mm 23 mm UWZ: 31,0 kg/m D Z 1,0 mm 1,5 mm 2,0 mm 2,5 mm 3,0 mm 3,5 mm 4,0 mm 4,5 mm 5,0 mm 5,5 mm 6,0 mm 6,5 mm 7,0 mm 7,5 mm 8,0 mm α
13 Manual adapter: EHT head - 26mm dapter EHT - mada: OW 04 E H164 MT Drawing N : For punch: Length: mada (13mm) 150 mm 164 mm 100 t/m 5,5 kg/m 0 mm dapter EHT - Wila: OW 03 I000 E026 W020 H127 VT Drawing N : For punch: Length: Wila (20mm) 150 mm 127 mm 100 t/m 5,5 kg/m 0 mm
14 Standard upper tools: Wila head - 20mm Punch: OWZ W020 H197 MT R01,0-078 Drawing N : Max. box height: 55 t/m 41,5 kg/m 197 mm 160 mm 90 mm S S S Radius: 1,0 mm 78 S Quick safety click Punch: OWZ W020 H237 MT R01,0-078 Drawing N : t/m 60,5 kg/m S Max. box height: 237 mm 200 mm H S S 40 mm Radius: 1,0 mm 78 H = 5 x 200mm S Quick safety click Punch: OWZ 02 I000 W020 H197 MT R03, Drawing N : Max. box height: 200 t/m 29,5 kg/m 197 mm 160 mm 90 mm S S S Radius: 0 mm 3,0 mm 50 S Quick safety click 13
15 Standard upper tools: Wila head - 20mm Punch: OWZ 05 I000 W020 H217 MT R01,0-028 Drawing N : Max. box height: ending: 60 t/m 25,0 kg/m 217 mm 180 mm 105 mm 0 mm Radius: 1,0 mm 28 Folding: 80 t/m S Quick safety click S S S ombination upper tool with Wila Head Upper tool holder: OWH 02 I000 W020 H177 MT 25mm x 120 Drawing N : t/m 40,0 kg/m E S 177 mm 140 mm Insert width: Insert diameter: 0 mm 36,0 mm R10 - R25 S Quick safety click ending insert for punch holder types OWZ 05 ending insert: OW 01 I000 E006 H068 MT R01, mm 6 mm Radius: 1,0 mm 28 Drawing N : F
16 EHT Standard: 90 x 90 mm (block die in undivided version) lock die: UWZ 02 V E090 H090 MT Drawing N : t/m 50 t/m 60 t/m 70 t/m 80 t/m 90 t/m 51,3 kg/m 90 mm 90 mm Folding: 90 t/m D EHT VarioTool: 60 x 60 mm (block die) lock die: UWZ 01 V H060 VT Drawing N : t/m 21,0 kg/m 60 mm 60 mm STZ : D Remark : Prices, other opening and angle on request! 15
17 EHT VarioTool: 90 x 90 mm lock die: UWZ 01 V E090 H090 VT Drawing N : t/m 60 t/m 60 t/m 60 t/m 70 t/m 80 t/m 90 t/m 45,6 kg/m 90 mm 90 mm Remark : Prices, other opening and angle on request! Length: Length: lock die: UWZ 02 V E090 H090 VT Drawing N : t/m 50 t/m 60 t/m 70 t/m 80 t/m 90 t/m Folding: 90 t/m 51,3 kg/m 90 mm 90 mm Remark 1: for VarioPress with the option "bottom tool shift". Remark 2: folding with the upper tool type OWZ 05 Remark 3: Prices, other opening and angle on request! Length: Length:
18 EHT Standard: foot width 55 mm ottom tool: UWZ 05 EV E055 H140 MT 50mm x mm t/m 62,5 kg/m 70 mm 140 mm Drawing N : mm 43 mm ottom tool: UWZ 05 EV E055 H140 MT 60mm x 060 Drawing N : mm t/m 62,5 kg/m 75 mm 140 mm 55 mm 43 mm ottom tool: UWZ 05 EV E055 H140 MT 80mm x 080 Drawing N : mm t/m 75,4 kg/m 100 mm 140 mm 55 mm 43 mm
19 EHT Standard: foot width 55 mm ottom tool: UWZ 05 EV E055 H140 MT 100mm x mm t/m 80,4 kg/m 125 mm 140 mm Drawing N : mm 43 mm ottom tool: UWZ 04 MV E055 H140 MT V32/40-60 Drawing N : t/m 90 t/m 52,0 kg/m 55 mm 140 mm D F ottom tool: UWZ 06 MV E055 H140 MT Drawing N : Folding: 40 t/m 50 t/m 40 t/m 50,7 kg/m 50 t/m 90 t/m 55 mm 140 mm D F
20 EHT Standard: foot width ottom tool: UWZ 08 EV E013 H120 MT 8mm x 030 Drawing N : mm t/m 12,8 kg/m 1 D ottom tool: UWZ 08 EV E013 H120 MT 12mm x 030 Drawing N : mm t/m 15,0 kg/m D ottom tool: UWZ 09 EV E013 H120 MT 16mm x 030 Drawing N : mm t/m 19,8 kg/m 25 mm 1 D F
21 EHT Standard: foot width ottom tool: UWZ 09 EV E013 H120 MT 20mm x 030 Drawing N : t/m 22,8 kg/m 30 mm D ottom tool: UWZ 09 EV E013 H120 MT 24mm x 030 Drawing N : mm t/m 25,6 kg/m 35 mm D F ottom tool: UWZ 09 EV E013 H120 MT 30mm x 040 Drawing N : mm 100 t/m 32,6 kg/m 45 mm 1 D
22 EHT Standard: foot width ottom tool: UWZ 09 EV E013 H120 MT 40mm x mm t/m 36,8 kg/m 55 mm 1 D Drawing N : ottom tool: UWZ 09 EV E013 H120 MT 50mm x mm t/m 44,8 kg/m 65 mm 1 Drawing N : ottom tool: UWZ 09 EV E013 H120 MT 60mm x 060 Drawing N : mm t/m 52,8 kg/m 80 mm
23 EHT Standard: foot width ottom tool: UWZ 09 EV W013 H120 MT 70mm x 080 Drawing N : mm t/m 57,4 kg/m 85 mm ottom tool: UWZ 09 EV W013 H120 MT 80mm x 080 Drawing N : mm t/m 65,6 kg/m 100 mm ottom tool: UWZ 09 EV W013 H120 MT 100mm x 080 Drawing N : mm t/m 81,0 kg/m 130 mm
24 Folding ottom tool: UWZ W013 H120 MT 90 t/m 46,8 kg/m 60 mm 1 Drawing N : Remark: folding with the upper tool type OWZ 05 Standard adapter dapter: UW 01 E055 T013 H040 MT Drawing N : Length: 55 mm 40 mm 500 mm D dapter: UW 02 T H040 MT Drawing N : Length: 60 mm 60 mm 500 mm D
25 ccessories EHT bending film F 0,4 x 102 to avoid bending marks thickness: 0,4 mm, width: 102 mm Unit Length Meter 1-4 m Meter 5-29 m Roll 30 m EHT bending film F 0,8 x 102 to avoid bending marks thickness: 0,8 mm, width: 102 mm Unit Length Meter 1-4 m Meter 5-29 m Roll 30 m EHT bending film holder FH1 continuously variable height and lateral adjustment incl. adapter for foot widths 55 mm, 90mm and max. bending film width 102mm, weight: 8 kg Unit 1 pair 1 pair Foot width 55/90 mm EHT bending tool cabinet WS1 dimensions: 1250x1050x1250 (LxWxH) Price on request! EHT bending tool trolley WW1 dimensions: 1300x770x1415 (LxWxH) Price on request! 24
26 EHT standard bending tools and accessories Inquiry Order ompany stamp ompany: ontact person: Street: ZIP code / place: Telephone: Fax: Order / Inquiry Serial-No.: mount Description Length Price / Piece omments: Tel.: / Fax.: service@eht.de attn: Mr. Neubold 25
27 Inquiry form VarioTool Fax Inquiry: Inquiry: attn: Mr. Neubold ompany: ontact person: Street: ZIP code / place: Telephone: Fax: Details of your machine: Your sketch: Machine type: Serial-No.: Mounting height: Details of material: Material: Sheet thickness: Length: Tolerances: omments: Details of the new tool: Desired tool lenght: Division: omments: Please attach a sketch of your bending part. 26
28 Version EHT Werkzeugmaschinen GmbH Emmendinger Straße Teningen Tel.: +49 (0) / Fax: +49 (0) / info@eht.de
Bending Tools. Bending
ending Tools ending ontents Page Tooling systems 2 EHT bending tools 3 Upper tool systems Standard upper tools: EHT head - 26mm Z-ending: EHT System Manual adapter: EHT head - 26mm Standard upper tools:
GRM SERIES. Mechanical stamping and forming machines GRM 80E / GRM 80P
GRM SERIES Mechanical stamping and forming machines GRM 80E / GRM 80P More economical large-scale production Produce stamped and formed parts in large batches with even higher productivity. Benefit from
UKB-ACCESSORIES
12 WWW.UKB-GMBH.COM Squaring arms. 234 235 Digital angle gauge. 235 Insertion tools. 236 237 Phone +49 (0) 27 36 / 44 42-0. Fax +49 (0) 27 36 / 44 42-22 Squaring arms ADVANTAGES Flexible and exact adjustable
ADVANCED BENDING SOLUTION WITH 3D CONTROL
BENDING ADVANCED BENDING SOLUTION WITH 3D CONTROL ADVANCED BENDING SOLUTION WITH 3D CONTROL COMPLETE RANGE TO COVER ALL OF YOUR BENDING NEEDS Built on the solid foundation of the HFE series, AMADA s HFE
UNIVERSAL FOLDING MACHINE. MAK 4 Evolution
UNIVERSAL FOLDING MACHINE MAK 4 Evolution MAK 4 Evolution The MAK 4 Evolution and the MAK 4 Evolution UD are our solutions for complex tasks involving industrial sheet metal forming powerful, precise,
C-FRAME PRESSES 250 2,500 kn
C-FRAME PRESSES 250 2,500 kn C-BASELINE. Reliable presses for manual or automatic operation. RELIABLE, COMPACT, ROBUST. Type C-BASEline models enable the cost-effective production of small and very small
READY. READY Bender Concept Sketches
Concept Sketches CB1 Concept Sketch A is a CB1 tool when, and are within the proper parameters to use standard tooling. = Part Material Thickness 2 CB1 Square Bend 90 = Part Length (bent leg) = Part Angle
ADVANCED BENDING SOLUTION WITH 3D CONTROL
BENDING ADVANCED BENDING SOLUTION WITH 3D CONTROL ADVANCED BENDING SOLUTION WITH 3D CONTROL COMPLETE RANGE TO COVER ALL OF YOUR BENDING NEEDS Built on the solid foundation of the HFE series, AMADA s HFE
ADVANCED BENDING SOLUTION WITH 3D CONTROL
BENDING ADVANCED BENDING SOLUTION WITH 3D CONTROL ADVANCED BENDING SOLUTION WITH 3D CONTROL COMPLETE RANGE TO COVER ALL OF YOUR BENDING NEEDS Built on the solid foundation of the HFE series, Amada s HFE3i
TM ARGREITER TECHNIK. [ Cancelling machine ] Hole punching machine. Options PERFOSET I/L. Cancelling machine PERFOSET I/L
![TM ARGREITER TECHNIK. [ Cancelling machine ] Hole punching machine. Options PERFOSET I/L. Cancelling machine PERFOSET I/L](/thumbs/72/66387211.jpg "TM ARGREITER TECHNIK. [ Cancelling machine ] Hole punching machine. Options PERFOSET I/L. Cancelling machine PERFOSET I/L")
Cancelling, validation machines and perforating machines are tools to mark, cancel or validate important documents, forms, tenders, cheque cards, passports, labels and many other articles permanently.
Safety mats. sensing the future. Electrical surface switches for safe activation and deactivation of machines, devices and automatic doors
sensing the future Electrical surface switches for safe activation and deactivation of machines, devices and automatic doors Reliable, robust, low-maintenance System is simple to install Surface switch
PSP Electro-permanent magnetic chuck PSP-03-EN
PSP Electro-permanent magnetic chuck PSP-03-EN Limited offer Choose from our PROMOTIONAL SIZES These sixteen promotional kits come as a complete solution for the handling and clamping of various sized
CONTRACTORS STEEL COMPANY STOCK BOOK AND REFERENCE GUIDE INDEX
CONTRACTORS STEEL COMPANY STOCK BOOK AND REFERENCE GUIDE INDEX CARBON STEEL BARS Hot Rolled Rounds...3 Squares...4 Strip...4, 5 Flats...5, 6, 7, 8 COLD FINISHED Rounds - 1018...9, 10 Rounds - 1045...10
Split Frame Clamshells and Accessories
Split Frame Clamshells and Accessories Sever and Machine Pipes From.625" to 86" (15.9 mm to 2184.4 mm) Rigid And Easy To Handle - Aluminum Body Gives Highest Strength-To- Weight Ratio And Our Exclusive
Argenta W A L L M O U N T I N G M E T A L C A B I N E T S
Argenta W A L L M O U N T I N G M E T A L C A B I N E T S The ARGENTA Series is a group of metal enclosures used to house on the inside electrical or electronic switchgear, controlgear and equipment necessary
Area of use The Provita wall rail system is suitable for use
WALL RAILS GENERAL WALL RAILS Area of use The Provita wall rail system is suitable for use in normal wards in intensive care wards in pre-operation rooms in the recovery room in doctors surgeries. Due
YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
HACO - ROBOSOFT ROBOT BENDING SYSTEM THE NEXT STEP IN AUTOMATED BENDING
HACO - ROBOSOFT ROBOT BENDING SYSTEM THE NEXT STEP IN AUTOMATED BENDING ROBOT BENDING SYSTEM THE NEXT STEP IN AUTOMATED BENDING 02 PRODUCTIVITY THROUGH TECHNOLOGY... Today s high requirements concerning
Stronger, faster and. deeper bendings. 3 Axes (R Manual) CNC Press Brake. Stronger, faster and. deeper bendings;
3 Axes (R Manual) CNC Press Brake PowerBend Series machines were redesigned based on users preferences and it became unique machine with its electronic and mechanical features. Stronger, faster and deeper
Delem E v e r y t h i n g u n d e r c o n t r o l
DA-41 The compact press brake control Operation Manual V4, GB Delem E v e r y t h i n g u n d e r c o n t r o l 8064-925A, V0413 Delem Table of contents 1. Introduction...1 2. Hardware...3 2.1 Front panel...3
Ideal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
DA-41. The compact press brake control. Operation Manual V3, GB. Delem. E v e r y t h i n g u n d e r c o n t r o l
DA-41 The compact press brake control Operation Manual V3, GB Delem E v e r y t h i n g u n d e r c o n t r o l 8064-910C, V0510 Delem Table of contents 1. Introduction...1 2. Hardware...3 2.1 Front panel...3
Micrometers / Micrometer heads
Micrometers / Micrometer heads of micrometers according DIN 863 Max. permissible range () errors (µm) 0-25 4 25-50 4 50-75 5 75-100 5 100-125 6 125-150 6 150-175 7 175-200 7 200-225 8 225-250 8 250-275
Servo-conventional milling machine
Universal Milling Machine Servo-conventional milling machine Control developed and built in Germany Positioning control for traveling pre-selected paths on all axes Constant cutting speed, whereby the
Strongman Metal Tools Price list July 2018
Strongman Metal Tools CC CK 2004/095733/23 CALL ANDRIES FOR EXPERT ADVICE 083 327 9988 or 087 135 2229 Soli Deo Gloria info@strongman.co.za Strongman Metal Tools Price list July 2018 PLEASE NOTE PRICES
DNC 402 P. User Guide. CYBELEC SA Tel RUE DES UTTINS 27 Fax SWITZERLAND USERGUIDE_DNC 402 P.DOC CONTENTS PAGE 1
DNC 402 P User Guide CYBELEC SA Tel. ++ 41 24 447 02 00 RUE DES UTTINS 27 Fax ++ 41 24 447 02 01 CH - 1400 YVERDON-LES-BAINS E-Mail: info@cybelec.ch SWITZERLAND USERGUIDE_DNC 402 P.DOC CONTENTS PAGE 1
HD 1703 NT Standard Tonnage Press Brake
HD 1703 NT Standard Tonnage Press Brake With models varying in capacity from 88-243 tons, Amada s new HD NT press brake series can handle a full range of applications in bend lengths from 101 to 161 inches.
Elabo TaMo. Mobile carrier system for industrial use
Elabo TaMo Mobile carrier system for industrial use Elabo TaMo Modular carrier system M-Frame TaMo is conceived modularly. The M-frame basic carrier consists of the pivoting casters, the bottom plate which
Measuring microscope VMM 100
Measuring microscope VMM 100 Techn. Mikroskopie Feinmechanik Measuring on high speed and Viewing with 1000x magnificationthe VMM 100 can do both. Exact and versatile in measuring The measuring stage grants
More bending freedom.
TruBend: More bending freedom. Machine Tools / Power Tools Laser Technology / Electronics The best bending solutions. Contents The best bending solutions. 2 Why TruBend is better. 4 TruBend Series 3000
meaden Special Shaped Punches & Dies Information English Version
Special Shaped Punches & Dies Information English Version 210 West 83rd Street Burr Ridge, Illinois 60521 Telephone: 630/655-0888 FAX: 630/655-3012 Internet www.printing.com How to Order Specials Clearance.515"
nyloflex processing equipment
nyloflex processing equipment valid from 2017-02-01 until revocation nyloflex equipment overview Standard equipment Format Narrow web Mid web Wide web nyloflex Combi F II nyloflex NExT Exposure F III nyloflex
AKAS AKAS. Press brake safety system. Laser actuated AOPD in compliance with EN OEM and Retrofit. Installed safety intelligence
Press brake safety system Laser actuated AOPD in compliance with EN 12622 OEM and Retrofit Installed safety intelligence Compatible with all control units WEBSITE Innovation Our vision: Our passion: We
Manufacturer of bending machines
Manufacturer of bending machines ANG HKS-CNC Profi HKS-CNC Profi Techincal data Working length 8.200 mm 7.000 mm 6.000 mm Length of the machine 9.100 mm 7.900 mm 7.000 mm Bending angle 145 145 145 Working
SYSTEM WORLD PRODUCT INFO
SYSTEM WORLD PRODUCT INFO August 208 System case.. System Case Configuration.. Width x depth x height (inches).56 x 0.62 x 3.3 inches Number of System Boxes Material Lid Type Art. No. Empty* ABS Black
Product catalogue. Aztec International S.A., ul. Bułgarska 63/65, Poznań, Poland, phone ,
Product catalogue Delivery Programme 2014 Status 02/2014 - Subject to change - Index Rail system... 4 Accessories mounting rails... 11 Rail connectors... 11 Cross connectors... 12 Module clamps... 13 Module
TRUMPF TC 2000 R. CNC punching machine. Manufacture year 1999 Control BOSCH Typ 3 Machine number Max. punching force
TRUMPF TC 2000 R CNC punching machine Manufacturer Model TRUMPF TC 2000 R Manufacture year 1999 Control BOSCH Typ 3 Machine number 700111 Working area Max. punching force 1.270 x 2.020 mm 180 kn KISTNER
SBT SERIES. Swing Beam Touch Shear
SBT SERIES Swing Beam Touch Shear World s heaviest and most robust swing beam shear construction Proven reliable design frame with rigid swing style upper beam Optimized cutting angle for minimized distortion
DIGITUS Server Cabinet Unique Series
15 Years Product Warranty kg loading capacity Modular aluminum frame construction large range of equipment available Overview DIGITUS Server Cabinet Unique Series 600, 800 mm width mm depth Features Safety
Servo/Hydraulic, Down-Acting Press Brake. HFE M2 Series HFE M2 5020, HFE M2 8025, HFE M2 1003, HFE M2 1303, HFE M2 1703, HFE M & HFE M2 2204
Servo/Hydraulic, Down-Acting Press Brake Series 5020, 8025, 1003, 1303, 1703, 1704 & 2204 Complete range to cover all of your bending needs. Built on the solid foundation of the HFE series, Amada s new
d for heavy-duty work with coolants and lubricants, protection rating IP67 according to IEC 60529, even connected absolute system S_Connect Proximity
HAND TOOLS In 1981, Sylvac launches the first caliper with digital read-out on the market. Quickly, other models followed and the market of these handtools took an incredible rise. Sylvac did not remain
Folding system UpDownBend
RAS Reinhardt Maschinenbau GmbH No more flipping parts! Folding a profile No flipping The folds the part up and down and revolutionizes the entire folding sequence. This unique folding system reduces cycle
MX700 INSTRUCTIONS BOOK HYDRAULIC PUNCHING MACHINE
HYDRAULIC PUNCHING MACHINE MX700 INSTRUCTIONS BOOK PRADA NARGESA, S.L Ctra. de Garrigàs a Sant Miquel s/n 17476 PALAU DE STA. EULALIA (GIRONA) SPAIN Tel. 972 568085 - Fax 972 568320 www.nargesa.com - nargesa@nargesa.com
Mechanical and adapters
Pneumatic expansion shafts Mechanical expansion shafts Expansion couplings Expansion chucks and adapters Friction and knife shafts Shaft handling Expansion chucks and adapters E X P A N S I O N U N I T
FOLDING MACHINES
www.erbend.com FOLDING MACHINES Erbend which designs and manufactures only folding machines is located in the industry center of Turkey,Bursa, and founded after 30 years of world-wide experience in machinery
BENEFITS OF JMT PRESS BRAKES
BENEFITS OF JMT PRESS BRAKES JMT press brakes benefit your bottom line with higher quality parts, faster cycle times, lower operating and maintenance costs. Whether your application requires bending simple
A U T O C O L L I M A T O R S
Printed in Germany 229 900 E 04/07 E l e c t r o n i c α A U T O C O L L I M A T O R S Measure With Precision MÖLLER-WEDEL OPTICAL GmbH Rosengarten 10 D-22880 Wedel Tel : +49-41 03-9 37 76 10 Fax: +49-41
Explosionproof Meter Housings
METER HOUSINGS Explosionproof Drilled and tapped to specification, attach layout sheet. Dimensions are internal. XJDGCH N4 XJDFGCH N4 4 1/8 x 4 1/8 X 3 XJMCGCH N4 6 3/4 x 6 3/4 x 3 XJTGCH N4 XJTFGCH N4
REASONS WHY A FOLDER MAKE SENSE!
FOLDING MACHINES GREEN SOLUTIONS The motorized folding machines from CIDAN are the right solution for any company that is looking for flexibility in their production and has an environmentally friendly
mm range nonius mm/inch mm range nonius mm/inch
Measuring tools Vernier Calipers MIB Messzeuge Germany Precision micrometers Dial indicators Dial supports Magnetic dial supports Digital thickness gauges Precision inside micrometers Vernier caliper standard
PRESS BRAKE MP3003CNC
PRESS BRAKE MP3003CNC INSTRUCTIONS BOOK PRADA NARGESA, S.L Ctra. de Garrigàs a Sant Miquel s/n 17476 Palau de Santa Eulàlia (Girona) SPAIN Tel. +34 972568085 nargesa@nargesa.com www.nargesa.com Thank you
Geometry. Week 32: April 13-17, 2015
G.13 Geometry Week 32: April 13-17, 2015 The student will use formulas for surface area and volume of threedimensional objects to solve real-world problems. G.14 The student will use similar geometric
System 28 Welding and Clamping Table
System 28 Welding and Clamping Table Siegmund System 28 Contents Welding bench S4 Standard Komfort Bench legs Stops Squares Heavy-duty medium and light construction Universal squares Prisms Bolts Clamps
نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased durability easy and quick installation reasonable
EcoTec SP tables and base cabinets
Shapes and colours Tabletops and furniture surfaces Table superstructures, base cabinets and handles 30 mm panel with replaceable edge, Antistatic, light grey 30 mm panel with impact-resistant edge band
N3D G3 N3A. Rockwell hardness testing machine
N3D G3 N3A Rockwell hardness testing machine High efficiency - low cost. Customised test loads and easy handling. N3D G3 N3A Rockwell acc. to EN ISO 6508, ASTM E-18 HRA HRL HR 15-T HR 15-Y HRB HRM HR 30-T
20CATALOGUE 14PRODUCT. Monolyth has a wide range of 19 rack for equipment storage lockers
20CATALOGUE 14PRODUCT MONOLYTHCABINETS Monolyth has a wide range of 19 rack for equipment storage lockers of various sizes to meet any space requirements or needs, offering maximum performance in, computer,
V2013NC V235 NC FNC 1P300FS VERTICAL MITRE SAWS PRECISION MITRE SAW SPECIALLY CONCEIVED FOR PICTURE FRAMES CUTTING.
V0NC V5 NC FNC VERTCL MTRE SWS P00FS PRECSON MTRE SW SPECLLY CONCEVED FOR PCTURE FRMES CUTTNG. V0 NC V5 NC VERTCL MTRE SWS utomatic cutting system for wood, PVC and aluminum profiles. The model V0NC has
It s difficult to compete in today s world with yesterday s technology. We have solutions.
AD-R PRESS BRAKES It s difficult to compete in today s world with yesterday s technology. We have solutions. JMTUSA.com Email: JMT@JMTUSA.com Toll Free: 855-773-7727 (855-PRESS-BRAKE) JMT machines are
FOLDING MACHINES S H E E T M E T A L M A C H I N E R Y F O R L I F E
FOLDING MACHINES S H E E T M E T A L M A C H I N E R Y F O R L I F E SINCE 1907 Picture from early 1900s CIDAN Machinery Sweden AB, better known under the former name Göteneds Mekaniska Verkstad AB in
Hall 4 / F April w w w. d a t a - m. c o m. +++ Division Software +++ Division Automation
Hall 4 / F19 2014 Tube Düsseldorf 07. - 11. April 2014 5 Reasons... why COPRA RF and COPRA FEA RF Software for Tubes are superior to any other roll forming software and can save you time and money... Reason
SERVER RACKS & ACCESSORIES SERVER RACKS & ACCESSORIES
DESIGNED & MDE IN USTRLI SERVER RCKS & CCESSORIES SERVER RCKS & CCESSORIES Consulting 3D Prototyping Custom Server Racks 20 Series Racks IP Outdoor Enclosures SCEC Endorsed Cabinets Secure Data Cage Hot
PRESS BRAKE PRODUCTIVITY CATALOG$
GB PRESS BRAKE PRODUCTIVITY CATALOG$ www.wila.nl GB JANUARY 2012 ABOUT WILA INTRODUCTION INTRODUCTION ABOUT WILA Putting the client first. That sounds quite lofty and many companies make this claim. But
AKAS AKAS. Press brake safety system. Laser actuated AOPD in compliance with EN OEM and Retrofit. Installed safety intelligence
Press brake safety system Laser actuated AOPD in compliance with EN 12622 OEM and Retrofit Installed safety intelligence Compatible with all control units WEBSITE Innovation Our vision: Our passion: We
Sides: Choice of standard or vented standard. Vented side is shown. Page 3
P Style Grayox Enclosures Recessed slide-in top cover design for rack-mounted or free-standing applications Technical Data WE/FX DOUMENT Sides: hoice of standard or vented standard. Vented side is shown.
PRESSES. Rack and pinion presses. Toggle presses. Impact presses. Pneumatic presses. Rotary indexing table
PRESSES Rack and pinion presses Toggle presses Impact presses Pneumatic presses Rotary indexing table PRESSES Rack and pinion presses HP 40 HP 150 HP 150 T Type HP 40 HP 150 HP 150 T HP 225 T HP 200 Z
Power Series Camera Support
Power Series Camera Support Power Jib Power Column Power Dolly Power Series Camera Support Equipment Assembly Manual Remark: Before assemble the jib, please check the inventory and read this manual carefully
compact smile The mini-must-have for professional tool presetting and measuring
compact smile The mini-must-have for professional tool presetting and measuring 02 03 smilecompact Original ZOLLER Absolute precision, simple operation, fast results. That is what ZOLLER presetting and
Electrical Components Catalog Universal MATE-N-LOK Connector System
Introduction Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification Contacts completely enclosed in housings Positive locking housings Insulation
WALSER GmbH & Co. KG Gewerbering Burgheim Tel: Fax: Germany
WALSER GmbH & Co. KG Gewerbering 26 86666 Burgheim Tel: +49 8432 9489-0 Fax: +49 8432 9489-8333 Germany www.aptaris-system.com For production reasons there may be technical and color variations. 30 YEARS
Edition 1.0. Made in Germany
Edition 1.0 Label Etikettenspender dispensers HS HS/VS and VS Made in Germany Label dispensers - Model overview Two dispensing directions Two versions are available so as to ensure that the labels can
VINYL CUTTER T II SERIES
VINYL CUTTER T II SERIES EN T II S E R I E S FEATURES TT 64 bit Simple Menu navigation Low noise Mac compatible 64 bit compatible Plug & play Servo motors High precision DC PRO LAPOS Q DrawCut PRO Cutting
SIMPLY PRODUCTIVE NEW:
Camtek.de ENGLISH 2 PEPS Version 8.1 Wire EDM SIMPLY PRODUCTIVE PEPS is one of the leading CAD/CAM systems. With more than 30 years of practical experience and more than 40,000 installations, PEPS is unparalleled:
Gas-actuated thermometer Stainless steel version Model 73
Temperature Gas-actuated thermometer Stainless steel version Model 73 WIKA data sheet TM 73.01 for further approvals see page 15 Applications General process instrumentation in the chemical and petrochemical
workstation acessories ErgoChair ergonomic chair designed for the factory worker
workstation acessories ErgoChair ergonomic chair ErgoChair ergonomic chair designed for the factory worker the backrest and seat foot ring adjustment ranges are designed to cover a large variety of production
Assignment Volume and Surface Area of Solids
Assignment Volume and Surface Area of Solids 1. (a) The diagonal of a cube is 16 3 cm. Find its surface area and volume. (b) The capacity of a cylindrical tank is 1848 m 3 and the diameter of its base
STORAGE. WORKTOP Worktop covered with a removable 2 mm ABS plate. HANDLES Metal handle.
STORAGE Roller cabinets 04 Modules 06 Expandable magnetic trays 08 Trolley 09 HANDLES Metal handle. LOCKING Central locking. WORKTOP Worktop covered with a removable 2 mm ABS plate. Metal chests 09 Tool
Grease Guns PRELIxx and PRELIxx PRO
Grease Guns PRELIxx and PRELIxx PRO 2014.1 Quality that leads Different grease gun colors for different grease types 03 Grease Guns PRELIxx and PRELIxx Pro 2014.1 Contents Contents PRELIxx 2014.1 Technical
Call to Order! 1
Carbon Steel Stainless Steel ANGLES BEAMS CHANNELS Bar Angles...... Structural Angles.............., Junior Beams... Standard....... Wide Flange 7,,9, Standard...... MC Shapes- (Car, Ship and Junior)......,
WAGO MARKING. Samples and Overview
WAGO MARKING Samples and Overview THE INDUSTRY S FASTEST AND MOST COST-EFFECTIVE MARKING SYSTEM Marking materials, printers and software from WAGO are perfectly synchronized for seamless marking: Inline
Media column_w8 Versatile and effective
Media column_w8 Versatile and effective Holzmedia Elements Universal. Flexible. Representative. The Media column W8 combines optimum functionality with elegant design and so adds a representative touch
T E C H N I K A R D A N S S Y S T E M
M A D E I N G E R M A N Y T E C H N I K A R D A N S S Y S T E M 23 45 L I N H O F P R Ä Z I S I O N S - S Y S T E M T E C H N I K G M B H M Ü N C H E N E T H E U N I V E R S A L S Y S T E M : L O W W E
TOOL CHANGERS INSTALLATION SIZE WWR1200
TOOL CHANGERS INSTALLATION SIZE WWR100 PRODUCT SPECIFICATIONS Forces and moments Shows static forces and moments which may impact on the tool changer when locked. Installation size WWR100 / Tool Changers
3D-Welding Table Systems
3D-Welding Table Systems www.tempus-holding.de Contents 3D-Welding Table Systems SST-Fix Series & SSTW-Fix Series 2 SST-Flex Series & SSTW-Flex Series 4 SST Accessory Kits 6 Assembly Tables SMT-Fix Series
Easy 3D WLAN CCD kits for ML 1800 and ML TECH+ Wheel alignment with user PC
Easy 3D WLAN CCD kits for ML 1800 and ML TECH+ Wheel alignment with user PC Wireless transfer to tablet PC Saving space without PC cabinet and fewer cables Flexible, mobile and highly accurate Easy 3D:
Workstation Hutch. Spacious and well-lit workspace.
Workstation Hutch Creates a secure, organized and personalized workspace. Easy and tool-free reconfiguration allows your workstation to evolve in line with your needs. Spacious and well-lit workspace.
Exercise Notebook Machinery
Exercise Notebook Machinery Exercise Notebook Machinery ACME Book Binding Machine Unique Features Supported: Single Clamp Perfect Binder with Automatic Jogging and Clamping of the Signatures / Formes.
MULTI-POINT AND SINGLE-POINT
MULTI-POINT AND SINGLE-POINT WE ARE GLASS PEOPLE FOR EVERY NEED In container glass production, wall thickness measurement is one of the most important aspects. Heye offers a flexible package for every
BIKO: Made in Italy, Quality, Style e Customer Care. Biko BENDING ROLLS
SHAPING THE FUTURE For over 20 years BIKO has been synonymous with quality. The BIKO line of bending rolls, introduced 20 years ago, rapidly became the choice for hundreds of manufacturers producing Boilers,
MVD produced its first machine. The first sheet metal working machine perforation press was presented to the market.
ilaser FIBER LASER 1950 1971 1974 1981 MVD produced its first machine. The first sheet metal working machine perforation press was presented to the market. The production of Heavy-duty Press Brakes and
MAIN OPERATING INSTRUCTIONS
MAIN OPERATING INSTRUCTIONS MPT-9 Mechanical Pan Tilt Unit 1. INTRODUCTION You have bought an MPT-9 Mechanical Pan Tilt Unit out of the wide range of Cambo Video products. We expect that you will achieve
Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320
Auxiliary Equipment and Miscellaneous Stands, Bench Tools, Vices, V-Blocks, Plates, Protrectors, Levels, Squares, Rules, Spring Calipers Page 320 319 Gauge Stand with Hardened Steel Anvil Series 7 Standard
Kully Reference Book
Kully Reference Book Serving the Greater Mid-West since 1946 Angles Channels Beams Rounds Sheets Squares Flats Rebar Wire Mesh Black & Galvanized Pipe Anchor Bolts Plastic, Copper, Black, Galvanized Pipe
Product catalogue. Affordable quality equipment designed for label printers
Affordable quality equipment designed for label printers Wasberger is a Swedish family owned company founded in 1971 and focused on narrow web conver ng. We design, develop and manufacture quality equipment
Swing Doors Personal Guiding Bars Card Reader Posts
Swing Doors Personal Guiding Bars Card Reader Posts Adaptable design «The use of suitably-designed swing doors, personal guiding bars and card reader posts allows us to provide barrier-free access to our
VERAK IP. 19 Stand Alone Cabinet with IP65 Rating.
19 Stand Alone Cabinet with IP65 Rating www.apw.eu.com Overview Material specification Frame: Steel 2.0 mm Panel mounting angles and reducing channels: Steel 2.0 mm Panel mount supports: Steel 1.5 mm Side
PEDESTAL MOUNTS SUPER STRONG MOUNTING SOLUTIONS FOR INSTALLATION OF HEAVIER DEVICES
PEDESTAL MOUNTS SUPER STRONG MOUNTING SOLUTIONS FOR INSTALLATION OF HEAVIER DEVICES PEDESTAL MOUNTS 4 HEAVY DUTY PEDESTAL MOUNTS WITH WINGNUTS 5 HEAVY DUTY PEDESTAL MOUNTS 6 HEAVY DUTY PEDESTAL MOUNTS
always the right accessories! NEW from kwb. The 5 kwb tool cases the proper solution for any requirement.
always the right accessories! NEW from kwb. The 5 kwb tool cases www.kwb.eu always the right accessories! 129x PH1 x 75 MM 2 MM - PHOO 3 MM - PHO 4 MM - PH1 1 x 4 x 1 MM 150 MM 4-6" 6 x 0 MM GS 200-250
LazerSafe LZS-003. Safeguarding System for Hydraulic Press Brakes. Mute point automatically determined, easily set and continuously monitored
ev. 1.04 08/205/B1-PM01700 Description Safeguarding System for Hydraulic Press Brakes Comprehensive operator protection at close proximity to workpiece Allows tools to close at high speed, increasing productivity