UKB-ACCESSORIES

Transcription

1 12

2 Squaring arms Digital angle gauge. 235 Insertion tools

3 Phone +49 (0) / Fax +49 (0) / Squaring arms ADVANTAGES Flexible and exact adjustable Angle steplessly variable Stopper system for long, small and not square sheet metal parts Squaring arms Per piece 160, 1,5 kg Usable as stopper 90 left and right Flexible applicable on all dies up to 60 mm width Measurement (H x W x T) about 80 x 125 x 320 mm Per piece 180, 1,5 kg Usable as stopper 90 left and right Flexible applicable on all dies up to 105 mm width Measurement (H x W x T) about 80 x 125 x 320 mm Per piece 234, 3,0 kg Usable as stopper 90 left and right Flexible applicable on all dies up to 60 mm width Measurement (H x W x T) about 70 x 170 x 335 mm Adjustable squaring arm Per piece 292, 3,5 kg Stepless angular adjustment each with 30 Usable as stopper left and right Flexible applicable on all dies up to 60 mm width Measurement (H x W x T) about 70 x 170 x 460 mm Magnetic, adjustable squaring arm Per piece 478, 5,5 kg Stepless angular adjustment each with 60 Usable as stopper left and right Flexible applicable on all dies from 415 mm length Measurement (H x W x T) about 70 x 520 x 250 mm 234

4 Squaring arms Squaring arms Per piece 226, 1,3 kg Stepless angular adjustment 90 Usable as stopper left Flexible applicable on all dies from 130 mm length Measurement (H x W x T) about 50 x 130 x 190 mm Per piece 226, 1,3 kg Stepless angular adjustment 90 Usable as stopper right Flexible applicable on all dies from 130 mm length Measurement: (H x W x T) about 50 x 130 x 190 mm Set 420, 2,60 kg Stepless angular adjustment 90 Usable as stopper left respectively right Flexible applicable on all dies from 130 mm length Measurement: (H x W x T) about 50 x 130 x 190 mm Digital angle gauge Per piece 56, 0,20 kg Length of the inside flange at 90 : About 54 mm Flexible measuring zone: 360 Display accuracy: 0,1 Zero position in any position of the flanges possible Clamping in any position of the flanges possible Contact surface of the flanges magnetic Measurement: (H x W x T) about 22 x 50 x 104 mm Per piece 62, 0,32 kg Length of the inside flange at 90 : About 177 mm Flexible measuring zone: 360 Display accuracy: 0,1 Zero position in any position of the flanges possible Clamping in any position of the flanges possible Contact surface of the flanges magnetic Measurement: (H x W x T) about 22 x 50 x 227 mm 235

5 Phone +49 (0) / Fax +49 (0) / Insertion tools ADVANTAGES Insertion of threaded bolts and screw nuts from M3 up to M10 on your press brake possible without a special machine Different sizes of threaded bolts and screw nuts with short set up time applicable Build up of several tools next to each other possible Wear resistance though hardened body and activ components Pressure surface and active components ground to avoid marks on the sheets Clearly arranged storage in corresponding suitcase Via adaptor systems applicable on all other press brakes (see chapter 10) VIDEO Insertion tools UKB-System A Set 835, 5,5 kg Set consists of: Punch/top-tool holder Die holder 4 Bolts Tool case 40 Ø5,1 Ø8,1 120 Ø6,1 Ø10,1 Ø3, Ø4,

6 UKB-System B Set 835, 5,2 kg Set consists of: Punch/top-tool holder incl. Simple Clamp Die holder 4 Bolts Tool case 40 Ø5,1 Ø8, Ø6,1 Ø10,1 12 Ø3, Ø4,