General Specifications
|
|
|
- Kathlyn Allison
- 5 years ago
- Views:
Transcription
1 General Specifications Model PR10 ontacting onductivity Retractable fitting On-line measurements often present extra challenges, especially when routine maintenance is required. The PR10 is ideally suitable for applications where the sensors must be removed without interrupting or shutting down the process. Without any special tools the PR10 can be retracted safely from the process at pressures up to 5 bar. For ease of use optional flush ports are available. In the retracted position the sensor can be kept moist, cleaned or even calibrated. This can all be done without process interruption or disassembly of the armature. Features One model for ph, conductivity and inductive conductivity sensors uild in scraper to avoid contamination of the fitting Usable for wide range of sensors safe through the valve insertion and retraction design Simplified installation by optional ball valves with flanged or tapered connections Optional flush port for keeping moist, cleaning and calibration 3rd dition
2 2 General Specifications. Wetted materials - For sensor check Instruction Manual - Stainless steel ISI O-ring seals: Viton 70 shore. Non-wetted materials - For sensor check Instruction Manual - Stainless steel ISI 316, Polypropylene glass filled. Insertion length - Ref. mechanical drawing page 4.. Pressure/temperature ratings - Static conditions: see Figure Operating conditions during extraction and insertion max. 500kPa, max Flange ratings: - IN flange N32 PN10 - NSI flange 1¼ 150 lbs - IN flange N50 PN10 - NSI flange lbs F. Specifications of the sensor used - Please check sensor specifications G. Weight - pprox 2.5 kg excl. ball valve H. Specifications of the S4-PR Wetted Parts ody & electrodes : SS ISI 316 or Titanium grade 2 or 3 O-ring : Viton Mounting adapter : PR10 nsulations : PK (Poly ther ther Ketone) I. Operating Specifications Measuring system : 2-electrode Maximum pressure : 10 bar (142 PSIg) Maximum temp. : 110º (230 F) Temp. response : < 1 minute for 90% of a step change Sterilize : t 135 (275 F) bar ISI Fig. 1 Pressure / Temperature graphic
3 3 Model Suffix Option escription ode code S4* 19 mm conductivity sensor -S Stainless steel Fitting-type -PR For retractable mounting lways -NN fixed length ellconstant /cm /cm able length meter meter meter meter meter -T1 Pt1000 M19x1.5 Unit: mm (inches) Note: option Q is now standard delivered Note: option M is now standard delivered 48 (1.89") Fig. 2 S4 -PR Model- and suffix codes Model Suffix Option escription PR10 Retractable onductivity Fitting 19 mm Fitting -S SS Type ISI 316 O-ring -V Viton O-ring sealing Tube length meter tube length onnection -32 N32 / 1¼ mounting -50 N50 / 2 mounting Sensor adapter for -S4 S4 Screw-in adapters /S125 ISO 228/1 G1¼ to 1¼ M-NPT (SS ISI 316) /S200 ISO 228/1 G2 to 2 M-NPT Flange adapters /F125 Flange adapter drain 1¼ 150 lbs (SS ISI 316) /FN125 Flange adapter no drain 1¼ 150 lbs /F200 Flange adapter drain lbs /FN200 Flange adapter no drain lbs /F32 Flange adapter drain N32 PN10 /FN32 Flange adapter no drain N32 PN10 /F50 Flange adapter drain N50 PN10 /FN50 Flange adapter no drain N50 PN10 Weld-in adapter /W125 Straight weld-in adapter ISO 228/1 G1¼ (SS ISI 316) /W200 Straight weld-in adapter ISO 228/1 G2 all valves (SSl ISI 316) /F125 Flanged ball valve 1¼ 150 lbs * /F200 Flanged ball valve lbs /F32 Flanged ball valve N32 PN10 /F50 Flanged ball valve N50 PN10 /S125 Screw-in ball valve 1¼ F-NPT /S200 Screw-in ball valve 2 F-NPT ertificate /M 3.1 according N for wetted metal parts *Note: With a ball valve, either a screw-in or flanged adapter is required Note: for maintenance please order O-ring pick-up tool
4 4 mensions unit mm unit (inches) mm (inches) 390 (15.35") 110 (4.35 ) PR S4/S125/S (16.7") 54 (2.15 ) PR S4/F..125/F125 PR S4/F..32/F (30.7") 529 (20.8") PR10-S-V-5-32-S4 Fig. 3 mensional drawing PR with mounted S4 sensor
5 5 mounted S4 sensor unit mm (inches) 362 (14.25") 142 (5.6 ) PR S4/S200/S (15.4") 82 (3.25 ) PR S4/F..200/F200 PR S4/F..50/F (30.7") 529 (20.8") PR10-S-V-5-50-S4 Fig. 3 mensional drawing PR with mounted S4 sensor Note: with ball valve olts and gasket are included
6 6 Options PR10 F G g F F G g G K g b g K Fig. 5 mensions of the PR10 options K g b K K g b K Table 2 mensions options in mm (inches) Option escription Fig. b g K /S125 ISO 228/1 G1¼ to 1¼ M-NPT ISO 228/1 - G1¼ 1¼ NPT 60 (2.4) /S200 ISO 228/1 G2 to 2 M-NPT ISO 228/1 - G2 2 NPT 58 (2.3) /F125 Flange adapter drain 1¼ 150 bs, G ISO 228/1 - G1¼ 69.5 (2.7) 66 (2.6) 29 (1.1) 15.7 (0.6) (4.6) 1/8 NPT 47 (1.9) 15.7 (0.6) 88.9 (3.5) /FN125 Flange adapter no drain 1¼ 150 bs, G ISO 228/1 - G1¼ 69.5 (2.7) 66 (2.6) 29 (1.1) 15.7 (0.6) (4.6) 47 (1.9) 15.7 (0.6) 88.9 (3.5) /F200 Flange adapter drain bs, G ISO 228/1 - G2 101 (4) 77 (3) 32 (1.3) 25 (1) 165 (6.5) 1/8 NPT 73 (2.9) 19 (0.7) (4.7)-(4.9) /FN200 Flange adapter no drain bs, G ISO 228/1 - G2 101 (4) 54 (2.1) 32 (1.3) 25 (1) 165 (6.5) 73 (2.9) 19 (0.7) (4.7)-(4.9) /F32 Flange adapter drain N32 PN10, G ISO 228/1 - G1¼ 69.5 (2.7) 66 (2.6) 29 (1.1) 16 (0.6) 140 (5.5) 1/8 NPT 47 (1.9) 18 (0.7) 100 (3.9) /FN32 Flange adapter no drain N32 PN10, G ISO 228/1 - G1¼ 69.5 (2.7) 66 (2.6) 29 (1.1) 16 (0.6) 140 (5.5) 47 (1.9) 18 (0.7) 100 (3.9) /F50 Flange adapter drain N50 PN10, G ISO 228/1 - G2 101 (4) 77 (3) 32 (1.3) 25 (1) 165 (6.5) 1/8 NPT 73 (2.9) 19 (0.7) (4.7)-(4.9) /FN50 Flange adapter no drain N50 PN10, G ISO 228/1 - G2 101 (4) 54 (2.1) 32 (1.3) 25 (1) 165 (6.5) 73 (2.9) 19 (0.7) (4.7)-(4.9) /W125 Straight weld-in adapter ISO 228/1 G1¼ ISO 228/1 - G1¼ 42 (1.7) 45 (1.8) /W200 Straight weld-in adapter ISO 228/1 G2 ISO 228/1 - G2 49 (1.9) 45 (1.8) /F125 all-valve flanged 1¼ 150 bs F 54 (2.1) 118 (4.6) 32 (1.3) M14 89 (3.5) /F200 all-valve flanged bs F 82 (3.2) 150 (5.9) 50 (2) M (4.8) /F32 all-valve flanged N32 PN10 F 54 (2.1) 140 (5.5) 32 (1.3) M (3.9) /F50 all-valve flanged N50 PN10 F 82 (3.2) 165 (6.5) 50 (2) M (4.9) /S125 all-valve screw-in 1¼ F-NPT 1¼ NPT 110 (4.3) 32 (1.3) /S200 all-valve screw-in 2 F-NPT 2 NPT 142 (5.6) 50 (2 )
7 7 Table 3 Spareparts Part no. escription K1525P dapter S4 - IS40 K1525 Outer tube K1525F O-ring pick up tool K1525 O-ring set PR10-S-V-5-32 K1525 O-ring set PR10-S-V-5-50 K1525 Key set K1525 Squeezing set K1525 Set M16 bolt & washer (8 pcs) K1525F Set M14 bolt & washer (8 pcs) K1525G Gaskets ball valves K1525H Gaskets ball valves ¼ K1525Y PR10/S125 K1525Y PR10/F125 K1525Y PR10/FN125 K1525Y PR10/F200 - F50 K1525Y PR10/FN200 - FN50 K1525YF PR10/F32 K1525YG PR10/FN32 K1525YH PR10/W125 K1525YJ PR10/W200 K1525YK PR10/F125 K1525Y PR10/F200 K1525YM PR10/F32 K1525YN PR10/F50 K1525YP PR10/S125 K1525YQ PR10/S200 K1541M dapter 2 NPT-G2 SS (IS40PR/) rain port connection The PR10 retractable fitting can be equipped with optional drain (or flush) ports on the flanged adapter. The drain ports are tapered 1/8 NPT female for small diameter connectors. Fig. 6 rain Port onnection
8 YOKOGW TRI ORPORTION World Headquarters 9-32, Nakacho 2-chome, Musashino-shi Tokyo Japan YOKOGW ORPORTION OF MRI 2 art Road Newnan G US YOKOGW TRI SI Pte. T. 5 edok South Road Singapore Singapore YOKOGW HIN O. T. 3F Tower artelo rocodile uilding No.568 West Tianshan Road hanging strict Shanghai, hina Yokogawa has an extensive sales and distribution network. Please refer to the uropean website ( to contact your nearest representative. uroweg H mersfoort The Netherlands YOKOGW MI ST.S..(c) P.O. ox 10070, Manama uilding 577, Road 2516, usaiteen 225 Muharraq, ahrain Subject to change without notice opyright Printed in The Netherlands, () I
General Specifications
General Specifications Model PR10 ontacting onductivity Retractable fitting On-line measurements always present extra challenges compared to at-line measurements. For example when maintenance needs to
General Specifications
General Specifications Model PR10 ph Retractable fitting On-line measurements always present extra challenges compared to at-line measurements. For example when maintenance needs to be done. pplications
General Specifications
General Specifications Model PR10 Inductive Conductivity Retractable fitting On-line measurements often present extra challenges, especially when routine maintenance is required. The PR10 is ideally suitable
Model PR10 Manual Retractable Fitting. Instruction Manual. IM 12B6K3-01E-E 2nd edition YOKOGAWA
Instruction Manual Model PR10 Manual Retractable Fitting YOKOGAWA 2nd edition 2 TABLE OF CONTENT 1 INTRODUCTION 3 1.1 Description 3 1.2 Features 3 1.3 Warranty 3 2 SPECIFICATIONS 4 2.1 General 4 2.2 Model-
General Specifications
eneral Specifications Model RA lass Rotameter S 0R0B0-00E-E The Rotameter RA is designed for continuous flow measurement of liquids and gases. The fluid passes through the metering tube from bottom to
Improving Worker Safety
STRON PSV s onsistency Transmitter Mounting & Service Valve Improving Worker Safety 10.12.201 PSV s is a ball-type mounting and service valve for the Satron VT optical consistency transmitter offering
Vonk Choke Valve. Flow Control. Features and benefits. Product overview. General applications. Technical data. Model CHV (Angle Body)
Vonk hoke Valve Model HV (ngle ody) Flow ontrol Vonk choke valves provide superior performance in abrasive environments, precise flow control and ease of maintenance, delivering operational reliability
Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
Front Load Dual Sensor
INFICON Front Load Dual crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The dual sensor provides a backup crystal and is essential
Subsea Valves.
Subsea Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 0 Offenbach am Main, Germany Tel.: + 00 Fax: + 00 FITOK, Inc. North Promenade lvd., Suite 0, Stafford, Texas, US Tel.: + 00 Fax:
Sensor Mounting Shells and Adaptors
Effective: June 2001 (replaces May, 1994) EX-1690 Sensor Mounting Shells and Adaptors Part Numbers and Applications Guide to Tank Mounting Shells and Retrofit Adaptor Inserts for use with King-Gage AcraSensor,
Front Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
QUALITY PRODUCTS, COMPETITIVE PRICING AND SERVICE BEYOND YOUR EXPECTATIONS Phone (408) Fax (408)
Product Overview Vacuum Components & Bellows Pages 2-6 SSL NW/KF components are a system of stainless steel vacuum flanges for tube sizes from 3/4" through 2" OD. These flanges can operate in high vacuum
Front Load Single Sensor
INFICON Front Load Single crystal sensors offer proven reliability and durability and have the best thermal stability of any sensor head on the market. The front load design allows for easy insertion of
Sputtering Sensor ADVANTAGES
The INFICON is specifically designed for use in any sputtering process. The sensor body and cooling tubes are gold plated beryllium copper for maximum cooling efficiency in the sputtering environment.
Cool Drawer Dual Sensor
The Cool Drawer Dual Sensor is designed for use in critical processes where it is desirable to have a second crystal in the vacuum chamber. Water cooled, cast stainless steel sensor body, two Cool Drawer
Service Manual ph communication functions
Service Manual ph communication functions SM12B06J03-04E-E 1st Edition 2 Contents Introduction 3 1 Communication functions 3 1.1 General 3 2 Connection 3 2.1 Connector pin allocation 3 3 Setting of communication
MultiPort Ball Valves
Subsidiary of Bray International, Inc. Subsidiary of BRY INTERNTIONL, Inc. & WY Multi-Port Valves Full Port/Standard Port / - Ball Valves SME CL 0/00 (PN0 to PN 0) 00/000 psi WOG ( to 9 Bar) MultiPort
Micro Motion T-Series Straight-Tube Mass Flow and Density Meters
Product Data Sheet PS-00371, Rev. A February 2004 Micro Motion T-Series Straight-Tube Mass Flow and Density Meters With MVD Technology TM Micro Motion JANUARY 2002 Micro Motion T-Series straight-tube meters
ph/orp 3/4-inch Combination ph and ORP Sensor Kits Features and Benefits DATA SHEET Versatile Mounting Styles Low Price High Performance
DATA SHEET 3/4-inch Combination ph and ORP Sensor Kits ph/orp Use the Digital Gateway to make any Hach analog combination ph or ORP sensor compatible with the Hach sc1000 Controller. Features and Benefits
selection of special materials is available to handle almost any fluid.
For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications
KF to CFF Adapters. Samho Syscom Ent. / Varian, Inc. Vacuum Technologies. Outline Drawing
KF to CFF Adapters Ordering Information KF to CFF Adapters CFF Part CFF KF Flange Overall Length Tube ID Shipping Size Number OD NW Size OD A in. (mm) B in. (mm) Weight lbs. (kg) in. FA0NW6S. NW6.8.57
Temperature Measurement SITRANS TS300
Siemens AG 018 For food, pharmaceuticals and biotechnology modular design Dimensional drawings Cable gland M1x1.5 for cable Ø 3... 6.5 (0.1... 0.6) Ø 60 (.36) Ø d = N + H 1 Ø 50.5 (1.99) U X H 1 N H Ø
Models A6100 & A6200 Purgemaster SNAP-IN Small Flowmeter. Long-term reliable performance flowmeters with low cost-of-ownership
ata sheet Purgemaster SNP-IN Small Flowmeter Long-term reliable performance flowmeters with low cost-of-ownership High strength stainless steel body the body is corrosion resistant stainless steel, rigidly
GRINNELL Figure 730 Mechanical Tees and Crosses Threaded / Grooved General Description. Technical Data. Page 1 of 8 JANUARY 2014 G210
Worldwide ontacts www.grinnell.com GRINNLL Figure 730 Mechanical s and es Threaded / General escription The GRINNLL Figure 730 Mechanical s provide an additional threaded or grooved outlet in existing
KF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Bellows are even provided for forming joints with main pipelines or sometimes
Flow Measurement SITRANS F M
Overview Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage proportional to
Insertion Flowmeter for compressed air and gases DN50 - DN700 (2-28 )
The flow meter is based on the thermal mass flow measurement and is ideal for measuring the flow of compressed air and gases in pipes from DN50 (2 ) to DN700 (28 ). With the, the consumption of compressed
SMG VALVES A Unit of SOUTHERN MANUFACTURING GROUP, Inc. BULLETIN August 2009 PERMASEAL PLUG VALVES TECHNICAL SPECIFICATIONS
SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. ULLETIN 13.01-02 ugust 2009 PERMSEL PLU VLVES TEHNIL SPEIITIONS SM VLVES Unit of SOUTHERN MNUTURIN ROUP, Inc. Materials of onstruction ody & over arbon Steel
SITRANS F flowmeters SITRANS F US. Flowmeter SONO 3300/FUS060 4/177. Technical specifications. Overview
Overview The combination of sensor SONO 3300 sensor and FUS060 transmitter is ideal for applications within the general industry. Measurements are independent of liquid temperature, density, pressure and
HMT360 Series Intrinsically Safe Humidity and Temperature Transmitters
www.vaisala.com HMT360 Series Intrinsically Safe Humidity and Temperature Transmitters Customers may specify the transmitter configuration when ordering the instrument, however changes in configuration
Micro Motion R-Series General Purpose Mass and Volume Flowmeter
Product Data Sheet PS 00363 February 2002 Micro Motion R-Series General Purpose Mass and Volume Flowmeter Now available with MVD Technology TYPE EL OCTOBER 2001 www.micromotion.com Micro Motion R-Series
MAG. ECO FLO imag Series NSF FEATURES
Flow Meters & Controls MAG ECO FLO imag Series M o vi n g P s N o rt w U NSF o n Easy setup Minimal straight pipe Mounted or remote rate & total 4-2mA output available Tamper-evident seal NSF-61 approved
Digital O.R.P. Transmitter Type 8206
Advantages / Benefits Design Compact O.R.P. Transmitter Type 8206 The O.R.P. transmitter compactly combines an O.R.P. sensor and an electronic with display in splash-proof plastic NEMA 4 (IP 65) enclosure.
HMT360 Series Intrinsically Safe Humidity and Temperature Transmitters
www.vaisala.com HMT360 Series Intrinsically Safe Humidity and Temperature Transmitters Customers may specify the transmitter configuration when ordering the instrument, however changes in configuration
Micro Motion T-Series Coriolis Flow and Density Meters
Product Data Sheet PS-00371, Rev. G October 2011 Micro Motion T-Series Coriolis Flow and Density Meters Micro Motion T-Series meters offer the best performance of any straighttube Coriolis meter. The single
TECHNICAL BULLETIN. Kämmer ColdFlow A Low temperature Control Valve. Experience In Motion FCD KMENTB /17
TECHNICAL BULLETIN Kämmer ColdFlow - 041000A Low temperature Control Valve FCD KMENTB4114-00 11/17 Experience In Motion Index 1. Introduction 2. Features and Benefits 3. Specification 4. Trim Design 5.
UHV Feedthrough, Conflat compatible flange. UHV female cable assembly, , PEEK connector and Kapton insulated coaxial
Coax-D Subminiature-D Coax-D Subminiature-D Accu-Glass 1, 3 and 5 Pin Feedthroughs UHV Feedthrough, 100520 Conflat compatible flange UHV female cable assembly, 100640, PEEK connector and Kapton insulated
Flow Measurement SITRANS F M
low sensor MAG P Overview Mode of operation The flow measuring principle is based on araday s law of electromagnetic induction according to which the sensor converts the flow into an electrical voltage
KF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Especially for forming joints with fixed pipelines or in certain cases between
Features: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
SMK Connectors. General Description. Contents (Click on any line to go to the indicated page) Test Data
SMK Connectors General Description These high-performance SMK (2.92 mm) connectors feature maximum VSWR for cable connectors of 1.15:1 from DC to 18 GHz, and 1.3:1 from 18 to 40 GHz. The maximum VSWR for
Cool Drawer Single Sensor
The Cool Drawer Single Sensors allow crystal installation into the sensor from the side, convenient for systems with insufficient room for front load crystal installation. The Cool Drawer Single Sensor
NT PRESSURE TRANSDUCER MODELS 4100, 4210, 4130, 4230
P/N 0-027289 (Rev. A 04/4) NT PRESSURE TRANSDUCER MODELS 400, 420, 430, 4230 User Guide Table of Contents Safety Alert Symbol... 2 Introduction... 3 Installation... 3 Mechanical Installation... 3 Electrical
True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe
True Union PVC Ball Valves Industrial Grade, Full Port Design 1/2 to 4 inch Pipe SERIES Features Pressure rated 232 PSI (16 Bar) at 73 F (23 C) Full Port design for unrestricted flow Energized PTFE ball
770MAX Conductivity/Resistivity Sensors THORNTON. Leading Pure Water Analytics
THORNTON Leading Pure Water Analytics - ASTM & NIST Traceable Calibration - Smart Sensor Technology - Two & Four Electrode Designs - NPT & Tri-Clamp Connections 770MAX Conductivity/Resistivity Sensors
LF3800 stainless steel push-to-connect fittings
3800 push-to-connect fittings principle of system 3800 push-to-connect fitting system The 3800 range provides the advantages of push-to-connect fittings instant connection and disconnection for a wider
E SERIES CIRCULATORS
E SERIES CIRCULATORS CAST IRON BODY CONSTRUCTION BRONZE BODY CONSTRUCTION Part No. Part No. Model 120V Motor 240V Motor List Price Wt (lbs) Model 120V Motor 240V Motor List Price Wt (lbs) E7 180200-643
Temperature sensors and accessories for heat and cooling measurement points
Temperature sensors and accessories for heat and cooling measurement points Applications Temperature sensors are metrological components for heat or cold measuring points. They are used in pairs and measure
Standard Bellows Metering Pumps
Standard Bellows Metering Pumps Bellows Metering Pumps operate on a positive displacement principle. Pumps are designed to displace both corrosive and noncorrosive fluids. Accurate to ± 0.5% from stroke
This is an economic model, especially suitable for instruments with ¼ port connection. Not detachable to repair.
Diaphragm seals - Stainless steel d. seals ¼ - PVC diaphragm seals ¼ - Stainless steel d. seals ½ - PVC diaphragm seals ½ - Easy-to-clean diaphragm seals - High pressure diaphragm seals - Low pressure
Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT
1/4 to 2 NPT Features Direct mount ISO5211 Full Port 316 stainless steel ball valve 1000 PSI working pressure at 100 F (38 C) Highly visual dome style valve position indicator Rugged aluminum Type 4X weatherproof
Balancing valve PN 16 and PN 25 DN
STAF, STAF-SG Balancing valve PN and PN DN 0-00 Pressurisation & Water Quality Balancing & Control Thermostatic Control ENGINEERING ADVANTAGE A flanged, cast iron (STAF) and ductile iron (STAF-SG) balancing
Digital ph-transmitter. Type Advantages / Benefits. Design. Application
Advantages / Benefits Easy System integration by Easy LINK provides low cost of ownership Programmable ph-transmitter functions for easy ph-measuring system solutions Compact version with integrated ph-electrodes
Item 620A Multi-Way Sanitary Ball Valve
R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel
General Specifications
General Specifications Model RAGH Rotameter This type of Rotameter is designed for measurement of liquids and gases. The conical glass metering tube has a free rotating float. The mounting position is
Type. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
Conductivity Transmitters
Conductivity Transmitters CDTX-90 Series Starts at $ 576 Electronics Only Display in µs, ms, kω, MΩ, ppm (TDS) Simulate Function Programmable Temperature Compensation Relay Options Dual Output Option Allows
Smart Conductivity. Reliable and Accurate Conductivity/Resistivity Measurement. THORNTON Leading Pure Water Analytics
Smart Conductivity THORNTON Leading Pure Water Analytics 770MAX Conductivity/ Resistivity Sensors ASTM & NIST Traceable Calibration Smart Sensor Technology Two & Four Electrode Designs NPT & Tri-Clamp
Specification Sheet (Ref XXXXXX)
Retractex B M Specification Sheet (Ref 243275-XXXXXX) The retractable armature Retractex B M was designed for sanitary applications in biotechnology, food, beverage and pharmaceutical industry. The compact
Adapter system for measuring instruments with G1 hygienic connection Model process adapter
Accessories Adapter system for measuring instruments with G1 hygienic connection Model 910.61 process adapter WIKA data sheet AC 09.20 Applications Food, beverage and pharmaceutical industry Cosmetics
MMT330 Series Moisture and Temperature Transmitters for Oil
MMT330 Series Moisture and Temperature Transmitters for Oil Features Continuous online measurement of moisture in oil Ball-valve installation no need to shut down the process or drain the oil Proven Vaisala
Submersion/Insertion ph/orp Sensors
Instruction Sheet PN 51A-396VP/rev.G January 2011 Models 396VP and 398VP Submersion/Insertion ph/orp Sensors For additional information, please visit our website at www.emersonprocess.com/raihome/liquid/.
5000 Sc. Cleaning Solution Generator Parts Manual. North America / International. DM20008 Rev. 02 (6-2012) *DM20001*
5000 Sc Cleaning Solution Generator Parts Manual North America / International www.tennantco.com DM20008 Rev. 02 (-202) *DM2000* A B Ref Part No. Serial Number Description Qty. 828 (000000- ) Bracket Wldt,
FEATURES Easy setup Minimal straight pipe Mounted or remote rate & total Tamper-evident seal NSF-61 approved IP68 rated
s Flow Meters & Controls ECO FLOMAG i M A G S e r i e s o M o vi n g P a r t N NSF Certified to NSF/ANSI 61 FEATURES Easy setup Minimal straight pipe Mounted or remote rate & total Tamper-evident seal
Coupling Dimensions Bolts Max. End. Allow Pipe Outside. Load Size Dia. End Sep. A B C No. Size x Length kg
OUPLINGS Style Reducing oupling Features Reducing oupling provides direct reduction on the pipingrun, without any accesories onsists of reducing gaskets and a steel washer which prevents entry of the smaller
ASTRO 2 CIRCULATORS. ASTRO 2 3-Speed Circulators (except Astro 286):
DATE: January 30, 015 DATE: January 5, 014 ASTRO 3-Speed Circulators (except Astro 86): ASTRO CIRCULATORS IRON BODY CONSTRUCTION (Includes Check Valve) Model No. Part No. Connection List Price Wt.ea.lbs.
Suction Pressure Sensor
Suction Pressure Sensor Model PR-265 RoHS 100% solid state fused silicon pressure sensor Rugged, leak-proof 316L stainless steel mono-..lithic pressure cavity with no welds, O-rings, or..seams/bonds Up
Mini Bellows Pumps. 180 Hines Ave. Bellville, OH PH: FAX:
Mini Bellows Pumps Mini Bellows models are ideal for low flow, low pressure metering applications. The pump is constructed entirely of plastic and utilizes GRI s time-proven bellows technology to provide
Limit Switch Box YT-870/875 SERIES
Limit Switch Box YT-870/875 SERIES PRODUCT MANUAL VERSION 1.01 Contents 1. Introduction 3 1.1 General information for the users. 3 1.2 Manufacturer Warranty 3 1.3 Explosion Proof Warning. 3 2. Product
Level Plus. Magnetostrictive Liquid-Level Transmitters with Temposonics Technology. Liquid-Level Transmitter Accessories Catalog
Level Plus Magnetostrictive Liquid-Level Transmitters with Temposonics Technology Liquid-Level Transmitter Accessories Catalog TABLE OF CONTENTS Accessories Overview...3 Floats Standard Floats...4.Standard
Compact Bellows Pumps
Compact Bellows Pumps Compact Bellows Metering Pumps were specifically designed for metering applications requiring low discharge pressures. Compact pumps have been successfully applied in photo, X-ray
Level Plus. Magnetostrictive Liquid-Level Sensors with Temposonics Technology. Accessories Catalog
Level Plus ostrictive Liquid-Level Sensors with Temposonics Technology Accessories Catalog SENSORS Document 551103 Revision C Floats, s, Meters, Enclosures, Indicators, Interface Terminals and Programming
Sensor Wafer MUT 1000 EL DS120-1-ENG
Electromagnetic Flowmeter dg: www.oryana.com.ar NEW Sensor Wafer MUT 1 EL DS12-1-ENG 1 / 1 Sensor MUT 1 EL MUT 1 EL sensors represent the state of the art of EUROMAG INTERNATIONAL production for water
FEATURES Easy setup Minimal straight pipe Mounted or remote rate & total Tamper-evident seal NSF-61 approved IP68 rated
s Flow Meters & Controls ECO FLOMAG imag Series o M o vi n g P a r t N NSF Certified to NSF/ANSI 61 FEATURES Easy setup Minimal straight pipe Mounted or remote rate & total Tamper-evident seal NSF-61 approved
PA 152. Probe mounting adaptor (high temperature)
(high temperature) FEATURES» From the Vibro-Meter product line» For the external mounting of TQ proximity probes» Removable housing, with U-shaped retainer, that allows easier probe installation and gap
Multiparameter Waterproof Meters. Multiparameter measurement in compact, IP67 rated waterproof enclosures
Multiparameter Waterproof Meters Multiparameter measurement in compact, IP67 rated waterproof enclosures HI98194 Features HI98194 Multiparameter Waterproof Meter ph, ORP, EC, TDS, Resistivity, Salinity,
APM CPF Series. Advanced Pressure Module
APM CPF Series Advanced Pressure Module Expand Your Multi-Purpose Signal Calibrator Now Measure Pressure! THE CRYSTAL APM CPF SERIES pressure module, with integrated CPF female connection, offers the functionality
Variable Area Flowmeter DATASHEET
Variable Area Flowmeter DATASHEET JUNHO 0 Data sheet DS/A6/6EN Rev. I Models A600 & A600 Purgemaster SNAP-IN Small Flowmeter Long-term reliable performance flowmeters with low cost-of-ownership High strength
Ideal Vacuum Products 5910 Midway Park NE, Albuquerque, NM Our products develop tomorrow s technologies
Our products develop tomorrow s technologies We are proud of our Ideal Vacuum Super-Seal bellows valves as they are manufactured to meet the highest standards. Our bellows valve design includes a hermetically
MULTI PARAMETER WATER QUALITY SENSORS
MULTI PARAMETER WATER QUALITY SENSORS IRRIGATION AUTOMATION WATER MEASUREMENT REMOTE MONITORING CLOUD BASED DATA PENTAIR ENVIRONMENTAL SYSTEMS 47.0 MP47 (UP TO 4 PARAMETERS) MP65 (UP TO 6 PARAMETERS) MULTI
Level Plus. Product Accessories. Magnetostrictive Liquid-Level Sensors with Temposonics Technology
Level Plus ostrictive Liquid-Level Sensors with Temposonics Technology SENSORS Product Accessories Floats, s, Meters, Enclosures, Indicators, Interface Terminals and Programming Document Part Number 551103
imag-series Flanged Magmeter
s Flow Meters & Controls imag-series o M o vi n g P a r t N FEATURES Easy setup Minimal straight pipe Mounted or remote rate & total Tamper-evident seal NSF-61 approved (3 only) IP68 rated 9001:2008 ISO
Digital ph-controller
Advantages / Benefits Design Compact ph-controller The ph-controller compactly combines a ph-sensor and a PID-controller with display in a splash-proof plastic NEMA 4 enclosure. The sensor component consists
Temposonics. Magnetostrictive, Absolute, Non-contact Linear-Position Sensors. C-Series Core Sensor, Models CS and CM Analog Outputs (Voltage/Current)
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors C-Series Core Sensor, Models CS and CM Analog Outputs (Voltage/Current) SENSORS Document Part Number 551020 Revision K Product
SANITRX Rupture Discs
SANITRX Rupture Discs 4-8803 SANITRX RUPTURE DISC The SANITRX* Rupture Disc is a semicircular-scored reverse acting rupture disc designed to provide instantaneous overpressure protection in sanitary environments.
SCADAPack Modbus multivariable transmitter
SCADAPack 4102 Modbus multivariable transmitter 1 The SCADAPack 4102 Modbus Multivariable Transmitter is the flagship of our Ethernet transmitter product line, offering precise measurement of process pressure,
MODEL 245 / 345 High Range
MODEL 245 / 345 High Range PRESSURE TRANSMITTER INSTALLATION DATA MANUAL 199 Fire Tower Drive Tonawanda, NY 14150 Toll Free: 1-800-688-0030 International: 716-629-3800 Fax: 716-693-9162 www.viatran.com
HMT360 Series Intrinsically Safe Humidity and Temperature Transmitters
HMT360 Series Intrinsically Safe Humidity and Temperature Transmitters For operation in up to Zone 0 / 20 Features Measures humidity and temperature, outputs also dew point, mixing ratio, absolute humidity
imag 4700 Series FLANGED MAGMETER
r (Remote Display) RIGHT METER FOR Water & Wastewater Treatment Municipal Pump skids Pump stations Packaged plants Filtration systems Reclaimed water Hydraulic fracturing Features Easy setup Minimal straight
708BS Series Bellows Stem Seal
708BS Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL S CRN Registration Number Available Bellows stem seals eliminate fugitive emissions by surrounding the valve stem with
Pressure reducing valve. Pressure reducing valve in straightway form NPS 1-6 ARI-PREDU - ANSI
Pressure reducing valve in straightway form NPS 1-6 Pressure reducing valve Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Cast steel Fig. 701 Page
Vane wheel probe BFA25 for flow measurement of gases and liquids with integrated, configurable transducer UFA in Ex-d housing
Vane wheel probe BFA25 for flow measurement of gases and liquids with egrated, configurable transducer UFA in Ex-d housing Drawing 5 Vane wheel flow probe BFA25 (Dimensions see Page 3) Measurable variables
LIST. Ningbo GC Bob Instrument Co., Ltd.
LIST A. All Stainless Steel Crimp Ring... 2 A1. All Stainless Steel Crimp Ring Back Mounting... 2 A1.1 All Stainless Steel Crimp Ring Back Mounting 1.5... 2 A1.2 All Stainless Steel Crimp Ring Flat Back
M3P..G/A, M3P..F/A Modulating control valves (PN16) for chilled and hot water systems
MP..G/A, MP..F/A Modulating control valves (PN) for chilled and hot water systems Three-way or straight-through valves with magnetic actuators for modulating control of chilled and hot water systems. Short
Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Double stop valves Type DSV 1 and DSV 2 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
D Issue A. Instruction Manual. Active Strain Gauge
Instruction Manual D357-35-880 Issue A Active Strain Gauge Description ASG2-1000-1/8 NPT ASG2-1000-NW16 ASG2-2000-1/8 NPT ASG2-2000-NW16 Item Number D357-35-000 D357-36-000 D357-37-000 D357-38-000 Declaration
EE771 Series. Flowmeter for compressed air and gases in Industrial Applications. EE771 Compact. EE771 remote probe
Series Flowmeter for compressed air and gases in Industrial Applications The flowmeter of the series, based on the measurement principle of thermal mass flow, is ideally suited for the measurement of flow
Level Plus. Product Accessories. Magnetostrictive Liquid-Level Sensors with Temposonics Technology
Level Plus ostrictive Liquid-Level Sensors with Temposonics Technology SENSORS Product Accessories Floats, s, Meters, Enclosures, Indicators, Interface Terminals and Programming Document Part Number 551103