Sensor Mounting Shells and Adaptors
|
|
|
- Maryann Bryant
- 6 years ago
- Views:
Transcription
1 Effective: June 2001 (replaces May, 1994) EX-1690 Sensor Mounting Shells and Adaptors Part Numbers and Applications Guide to Tank Mounting Shells and Retrofit Adaptor Inserts for use with King-Gage AcraSensor, AcraSensor II and Electronic Liquid Level Sensors KING-GAGE Mounting Shells/Adaptors: Flush Weld Tank Shells...page 2 2 in. Tri-Clamp Adaptor...page 3 2 in. Pipe Mount Adaptor...page 4 Flange Mount Adaptor...page 4 Flush Mount Conversions: Cherry Burrell Retrofit Adaptor...page 5 Tank-Mate Retrofit Adaptor...page 5 Foxboro Retrofit Adaptor...page 6 Wizard, Floe, Continental Adaptor...page 6 Anderson Instr. Retrofit Adaptor...page 7 Page 1
2 Sensor Mounting Shells and Adaptors Flush Weld Tank Shells Receiver for sensor is designed to be flush-welded to the inside tank wall. Provides for flush mounting of sensor in accordance with 3-A Sanitary Standard for CIP (clean-in-place) installation. Wetted face of shell available in 304 or 316L stainless; all other portions 304 stainless. Insulated Tank Wall: Trim Bezel Part Number Wetted Material Max. Tank Wall Length stainless steel 4-1/2 in. 6-1/4 in L stainless steel stainless steel 6-3/4 in. 8-1/2 in L stainless steel Insulated tank shells include trim bezel for outer wall Page 2
3 2 in. Tri-Clamp Adaptor External mount adaptor mates to Tri-Clover MP-2 in. quick-release sanitary fitting. Adaptor package does not include gasket or clamp assembly. Wetted face of shell available in 304 or 316L stainless steel; all other portions 304 stainless steel. Part Number Wetted Material Length stainless steel 6-1/4 in L stainless steel Shell Welding Protector These shell inserts are used to protect the face of the King shell during the welding and grinding/blending operations. Part Number Description Shell Welding Protector Adjustable to fit any length shell Shell Plug Used to seal an installed tank shell or adaptor. Permits use of tank prior to sensor installation or when sensor is removed for service. Part Number Applications King non-insulated shell King insulated shell (4-1/2 in.) King flange-mount shells Tank-Mate adaptor (short) Cherry-Burrell adaptor (short) Cont./Floe/Wizard adaptor Foxboro (short) King insulated shell (6-3/4 in.) Tank-Mate adaptor (long) Cherry-Burrell adaptor (long) Foxboro (long) Page 3
4 Pipe Mount Adaptor Shells Mounting adaptor mates to 2 in. NPT pipe thread. Specify whether male (NPT-M) or female (NPT-F) adaptor is required. Available in 304 stainless steel only. Part Number Adaptor Thread Length in. NPT-M 7-3/4 in in. NPT-F Flange Mount Adaptor Adaptor mates to 150-lb. ANSI flange (2 in., 3 in., or 4 in. sizes available). Adaptor has flat-faced flange in choice of carbon steel, 304 or 316 stainless steel. Gasket and bolt fasteners are not included. Part Number Flange Size/ Material Length in.-150 lb./carbon steel 6-1/2 in in.-150 lb./304 stainless steel in.-150 lb./316 stainless steel in.-150 lb./carbon steel 6-1/2 in in.-150 lb./304 stainless steel in.-150 lb./316 stainless steel in.-150 lb./carbon steel 6-1/2 in in.-150 lb./304 stainless steel in.-150 lb./316 stainless steel Page 4
5 Flush Mount Conversion Adaptors Specially designed adaptor inserts permit retrofit installation of sensor into existing flush mount shell by other manufacturers. Adaptors available in 304 stainless steel only. Note: We recommend verifying existing shell configurations for dimensional compatibility with intended conversion adaptor. For use with AcraSensor II or 5703 Electronic Sensor Cherry-Burrell Conversion Adaptors Manufacturer Part Number Length Retrofit Application King Sensor Cherry-Burrell /4 in. Short/Non Insulated Standard /2 in. Standard/Insulated Long For use with AcraSensor II or 5703 Electronic Sensor Tank-Mate Conversion Adaptors Manufacturer Part Number Length Retrofit Application King Sensor Tank-Mate /4 in. Short/Non Insulated Standard /2 in. Standard/Insulated Long Includes: Acorn nuts (both) and spacers ( only) Page 5
6 Flush Mount Conversion Adaptors (continued) For use with AcraSensor II or 5703 Electronic Sensor Foxboro Conversion Adaptors Manufacturer Part Number Length Retrofit Application King Sensor Foxboro /4 in. 2 in. extension spud Standard /2 in. 6 in. extension spud Long Wizard/Continental/Floe Conversion Adaptors Manufacturer Part No. Length Retrofit Application King Sensor Wizard/Cont./ /4 in. Insulated Tank or Standard Floe Single Wall Tank Includes: Cap screws Page 6
7 Flush Mount Conversion Adaptors (continued) For use with AcraSensor II or 5703 Electronic Sensor Anderson Conversion Adaptors Manufacturer Part No. Length Retrofit Application King Sensor Anderson /4 in. Short/ Non Insulated Standard /2 in. Standard/Insulated Long Includes: Clamp ring AcraSensor, AcraSensor II and Electronic Sensor Dimensions See Chart A See Chart B MODEL/RANGE PSIG Chart A AcraSensor & AcraSensor II Model Length Length Number in Inches in mm short /8 213 standard /8 270 long Chart B Electronic Sensor Model Length Length Number in Inches in mm xx-x /8 194 standard xx-x / xx-x / long xx-x /2 292 Page 7
8 Since 1937 KING E N G I N E E R I N G C O R P O R A T I O N Box 1228, Ann Arbor, Michigan U.S.A. Phone: (734) FAX: (734) King-Gage and the KE emblem are registered trademarks of King Engineering Corporation, Ann Arbor, Michigan, U.S.A. Specifications are subject to change without notice. 1994, 2001 King Engineering Corporation, all rights reserved. Page 8
Cool Drawer Dual Sensor
The Cool Drawer Dual Sensor is designed for use in critical processes where it is desirable to have a second crystal in the vacuum chamber. Water cooled, cast stainless steel sensor body, two Cool Drawer
SCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53
Bevel Seat. Excellence and quality are best achieved through teamwork and a shared vision. At THOMSEN. we strive to:
BEVEL SEAT FITTINGS Bevel Seat For over 60 years, L. C. Thomsen has been supplying high quality products to the dairy, food and beverage industry. When you think of THOMSEN, three words come to mind: excellence,
KF to CFF Adapters. Samho Syscom Ent. / Varian, Inc. Vacuum Technologies. Outline Drawing
KF to CFF Adapters Ordering Information KF to CFF Adapters CFF Part CFF KF Flange Overall Length Tube ID Shipping Size Number OD NW Size OD A in. (mm) B in. (mm) Weight lbs. (kg) in. FA0NW6S. NW6.8.57
OPTISWITCH 6600 C Technical Datasheet
Technical Datasheet Microwave Level Switch for standard hygienic applications Optimised sensor geometry, easy to clean Measures products with dielectric constant > 1.5 Small and compact KROHNE CONTENTS
TECHNICAL BULLETIN. Kämmer ColdFlow A Low temperature Control Valve. Experience In Motion FCD KMENTB /17
TECHNICAL BULLETIN Kämmer ColdFlow - 041000A Low temperature Control Valve FCD KMENTB4114-00 11/17 Experience In Motion Index 1. Introduction 2. Features and Benefits 3. Specification 4. Trim Design 5.
selection of special materials is available to handle almost any fluid.
For Pressure Transmitters and Bourdon Tube Pressure Gauges Types 839 X Chemical Seals for Various Applications Advantages / Benefits Separation of medium and measuring device in difficult applications
Adapter system for measuring instruments with G1 hygienic connection Model process adapter
Accessories Adapter system for measuring instruments with G1 hygienic connection Model 910.61 process adapter WIKA data sheet AC 09.20 Applications Food, beverage and pharmaceutical industry Cosmetics
TRANSMISSOR DE PRESSÃO PIEZO RESISTIVO INTELIGENTE MICRO PROGRAMÁVEL SÉRIE PAS
TRANSMISSOR DE PRESSÃO PIEZO RESISTIVO INTELIGENTE MICRO PROGRAMÁVEL SÉRIE PAS Flexibility Data configuration with HART configurator Measuring of gauge and absolute pressure Reliability Continuous self-diagnostic
Features: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
General Specifications
General Specifications Model PR10 Inductive Conductivity Retractable fitting On-line measurements often present extra challenges, especially when routine maintenance is required. The PR10 is ideally suitable
ph/orp 3/4-inch Combination ph and ORP Sensor Kits Features and Benefits DATA SHEET Versatile Mounting Styles Low Price High Performance
DATA SHEET 3/4-inch Combination ph and ORP Sensor Kits ph/orp Use the Digital Gateway to make any Hach analog combination ph or ORP sensor compatible with the Hach sc1000 Controller. Features and Benefits
TURNBUCKLES MM INCHES MM INCHES MM INCHES INCHES INCHES
HARDWARE: MEASUREMENTS CLOSED OPEN TURNBUCKLES MM INCHES MM INCHES MM INCHES INCHES INCHES 207020 STEEL 11MM 0.43 196MM 7.72 8MM 0.31 7.72 11.50 207021 STEEL TYPE 316 10MM (3/8 ) 12MM 0.47 238MM 9.37 10MM
MultiPort Ball Valves
Subsidiary of Bray International, Inc. Subsidiary of BRY INTERNTIONL, Inc. & WY Multi-Port Valves Full Port/Standard Port / - Ball Valves SME CL 0/00 (PN0 to PN 0) 00/000 psi WOG ( to 9 Bar) MultiPort
SCHEDULE 40 FLUSH JOINT FITTINGS
130 PIPE SIZE 2.5' 5' 10' 20' 2.5' 5' 10' 20' 1" 11.19 15.29 22.87 41.16 17.51 25.41 39.31 72.77 1-1/4" 12.83 19.80 28.54 51.21 19.15 29.92 44.98 82.82 1-1/2" 16.78 25.79 43.10 74.53 23.10 35.91 59.53
Stainless Steel Parts & Accessories Catalog NOVEMBER 2017
Stainless Steel Parts & Accessories Catalog NOVEMBER 2017 www.airnet-system.com TABLE OF CONTENTS PIPING PIPE 304L... 3 PIPE 316L... 3 FITTINGS QUICK DROP... 4 SWAN NECK... 4 ELBOW 45... 4 ELBOW 90...5
This is an economic model, especially suitable for instruments with ¼ port connection. Not detachable to repair.
Diaphragm seals - Stainless steel d. seals ¼ - PVC diaphragm seals ¼ - Stainless steel d. seals ½ - PVC diaphragm seals ½ - Easy-to-clean diaphragm seals - High pressure diaphragm seals - Low pressure
Temperature Measurement SITRANS TS300
Siemens AG 018 For food, pharmaceuticals and biotechnology modular design Dimensional drawings Cable gland M1x1.5 for cable Ø 3... 6.5 (0.1... 0.6) Ø 60 (.36) Ø d = N + H 1 Ø 50.5 (1.99) U X H 1 N H Ø
Gas-actuated thermometer Stainless steel version Model 73
Temperature Gas-actuated thermometer Stainless steel version Model 73 WIKA data sheet TM 73.01 for further approvals see page 15 Applications General process instrumentation in the chemical and petrochemical
Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
Cable Glands 757, BVE and 737 Series: Blanking Plugs, Adaptors and Reducers Increased Safety and Flameproof
757 Series Blanking Plugs 737 Series Adaptors and Reducers BVE Series Plastic Blanking Plugs & Sealing Washers Compliance Data: 757 Series Blanking Plugs: ATEX IECEx CE Ex d IIC or Ex e II Ex td A21 IP
Water Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply Maintenance Products Section WO 04 Last updated January 2007 CONTENTS SPECIFICATIONS A WO 04-S1A MULTI-PURPOSE UNRESTRAINED
Series PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
IP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
OPERATING INSTRUCTION MANUAL MODEL P/R60 & P/R65 DIFFERENTIAL PH & ORP PROBES
OPERATING INSTRUCTION MANUAL MODEL P/R60 & P/R65 DIFFERENTIAL PH & ORP PROBES N116-19 REV. 10 Water Analytics, Inc. 100 School Street Andover, MA 01810 Tel: (978) 749-9949 (855) 747-7623 Fax: (978) 749-9961
PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
TXC ULTRA-MINIATURE COAXIAL CONNECTORS. Ultra-Miniature Coaxial Connectors. Features. Materials/Finish. Specifications
ULTRA-MINIATURE COAXIAL CONNECTORS TXC Ultra-Miniature Coaxial Connectors Features 1: Ultraminiaturization provided by using hermetic beads. 2: The low profile and narrow flange leads to high density mounting.
Stainless Products, Inc.
Stainless Products, Inc. CAT. 2012-00 www.stainless-products.com Sanitary and Industrial Fittings Stainless Products, Inc. 1649 72nd Avenue Somers, WI 53171 Ph: 800-558-9446 262-859-2826 Fax: 262-859-2871
Parts and Service Manual IMCO
XXTREME ADVANTAGE Gimbal Parts and Service Manual IMCO 510 East Arrow Highway San Dimas, CA 91773 (800) 899-8058 (909) 592-6162 Fax (909) 592-6052 www.imcomarine.com email info@imcomarine.com TABLE OF
Emergency Luminaire for Fluorescent Lamps Series EXLUX 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
F250 F550
AIR INNOVATEDTM Illustrated Parts List for VMAC System V900111 Ford 6.8 L Triton V 10 2011 2014 F250 F550 www.vmacair.com Illustrated Parts List for VMAC System V900111 FORD 6.8 L TRITON V10 2014-2011
= 1.0 meter. 50 = 5.0 meter. 90 = 9.0 meter. 95 = 9.5 in. NOTE: Highlighted lengths are stocked for shorter lead times
DP1007 Series Intrinsically Safe, PRO 11 mm, 1/2 20 Case Thread, Eddy Current/s with Jacketed Cable PRO DP1007 series proximity probes measure shaft vibration and displacement on Class I Zone 0 A Ga 11
LS 6600 Technical Datasheet
Technical Datasheet Switch for level detection and dry-run protection Optimised sensor geometry, easy to clean Measures products with dielectric constant > 1.5 Small and compact KROHNE 06/2011-4001367301
PARTS CATALOG 0CR10-M85900EN
PARTS CATALOG 0CR10-M85900EN Last update Jul., 2013 Contents Fig. No. Fig. Name Fig. No. Fig. Name SD60 1. DRIVE(SD60) 2. UPPER HOUSING 3. INPUT SHAFT 4. SHIFT LEVER 5. SUPPORT(REMOTE CONTROL) 6. LOWER
Linear Luminaire with LED Series 6012/5
> For use in Zones 1 & 2, 21 & 22 > Latest LED technology with a high luminous efficacy and a long service life > Extra flat version for low mounting depth > Powder-coated sheet-steel or brushed stainless
Ideal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
Signet 2552 Metal Magmeter Flow Sensors
Signet 2552 Metal Magmeter Flow s Features Test certificate included Award winning hot-tap magnetic flow sensor up to DN2550 (102 in.) Patented Magmeter technology* Operating range 0.05 to 10 m/s (0.15
DIMENSION/WEIGHT kpa. 0 to 20 m / 0 to 60 ft 0 to 2 bar / 0 to 29 psi. 0 to 50 m / 0 to 160 ft 0 to 5 bar / 0 to 72.5 psi
V161102 Liquid Level Sensor Sensor for measuring the level of liquid in a well or tank USE / PURPOSE The range of liquid level sensors use pressure to measure the liquid level in a well or tank. The sensors
SANITRX Rupture Discs
SANITRX Rupture Discs 4-8803 SANITRX RUPTURE DISC The SANITRX* Rupture Disc is a semicircular-scored reverse acting rupture disc designed to provide instantaneous overpressure protection in sanitary environments.
Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems
Well Probe Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems The switch can be used to detect the water level within a well. When the water level in the
PENTAIR CLEAN & CLEAR PLUS CARTRIDGE D-94
PENTAIR CLEAN & CLEAR PLUS CARTRIDGE D-94 SINCE 1998 PREVIOUSLY PAC FAB 1 2 3 KEY 4 4654-25 KEY 4 4654-69 KEY 8 4654-30 20 4 5 7 6 KEY 8 4654-74A KEY 9 4654-23 8 9 10 12 13 KEY 23 4601-4801 KEY 19 4650-14A
Linear Luminaire with LED Series 6412/5
> For use in Zones 2, 21 & 22 > Latest LED technology with a high luminous efficacy and a long service life > Extra flat version for low mounting depth > Powder-coated sheet-steel or brushed stainless
E Q U I C I E N H Y G E U R O P E A N
PRESSURE AND LEVEL TRANSMITTERS ALL STAINLESS SERIES 8000-SAN OUTPUT 4-20 ma / 2-WIRE ZERO AND SPAN ADJUSTABLE ALL FORMS OF HYGIENIC/ SANITARY CONNECTIONS AVAILABLE VERY STRONG FLUSH MOUNTING DIAPHRAGM
Introduction. Available materials. Aluminum Carbon Steel Stainless Steel Ductile Iron Special Materials on Application
VALVES & CONTROLS VAREC 00B/00B The Varec 00B/00B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction 00B
CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Receptacle Kit and a Protective Cover Assembly.
Revised Sept-28-2009 Sealed Industrial Ethernet Circular IP67 Cat. 5e RJ45 Connector System Instructions CONEC Industrial Ethernet Circular Sealed RJ45 Connector System consists of a RJ45 Plug Kit, a Kit
Type. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E
Type 441, 442 DIN Flanged Safety Relief Valves spring loaded Metric Units Facts The-Safety-Valve.com LWN 468.01-E DIN, ANSI 40 Cap H2 19 Lock nut 18 Adjusting screw with bushing 16 Upper spring plate 12
Preparation and Installation of the CM and CMV Type Rupture Discs in Forward Acting Insert, Full Bolted, and Union Type Holders
Preparation and Installation of the CM and CMV Type Rupture Discs in Forward Acting Insert, Full Bolted, and Union Type Holders GEP-7011 Rev. F 23777 Ref. ID: 8637 WARNING USER SHOULD READ AND THOROUGHLY
SECTION FIVE - SANITARY - MANHOLES
Sealtight & 4 Lug Assemblies* ITEM # DESCRIPTION PART # 1 2 3 4 6 7 8 9 10 DUST COVER VENT (not shown) STAINLESS STEEL DUST COVER HINGE PIN (3/ SEALTIGHT) HINGE PIN (/8 4 LUG) STUD (3/ SEALTIGHT) STUD
Cool Drawer Single Sensor
The Cool Drawer Single Sensors allow crystal installation into the sensor from the side, convenient for systems with insufficient room for front load crystal installation. The Cool Drawer Single Sensor
Terminals, Lugs, and Fasteners
Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying
Economizer Regulator Filter Upgrade
Overview Chart LNG has released a new and improved economizer regulator, and filtering system. The new economizer filter system is designed to enhance reliability, and offer lower operating costs. In 2012
Standard Circulating Pumps
Product review Range: 1 1 3Q [ m³/h] Hz - North America 1 3 1 1 1.x1 1.x x x3 x 1 1 Q [ US gpm] >Single-head pumps: Seal-less circulator with flanged connection. Two speed, manually adjustable to match
SERIES 4360 "VERTICAL" OR MOTOR MOUNTED PUMP CENTERLINE DISCHARGE "D" DESIGNATION PARTS LIST 1-1/4" IMPELLER BORE /8" MECHANICAL SEAL NEW DESIGN
FILE NO.: 6043.126 DATE: May 11, 2010 SUPERSEDES: 6043.126 DATE: March 18, 2010 PARTS LIST SERIES 4360 "VERTICAL" OR MOTOR MOUNTED PUMP CENTERLINE DISCHARGE "D" DESIGNATION 1-1/4" IMPELLER BORE -- 1-5/8"
CombiTemp Temperature Measuring System
CombiTemp Temperature Measuring ystem Flexible building block concept All wetted parts in acid-proof, stainless steel Pt or Pt sensors, - or -wire DIN A or B (/, /, /) elements ensor tubes Cable sensors
PRODUCT SELECTION GUIDE BRAND PRODUCTS SINCE 1964 RUPTURE DISCS HOLDERS SPECIAL APPLICATIONS
SINCE 1964 PRODUCT SELECTION GUIDE RUPTURE DISCS HOLDERS SPECIAL APPLICATIONS PRODUCT SELECTION GUIDE LAMOT QUALITY RUPTURE DISCS Since 1964, the LaMOT brand of rupture discs and rupture disc holders have
Digital O.R.P. Transmitter Type 8206
Advantages / Benefits Design Compact O.R.P. Transmitter Type 8206 The O.R.P. transmitter compactly combines an O.R.P. sensor and an electronic with display in splash-proof plastic NEMA 4 (IP 65) enclosure.
Spray Nozzle Catalog A guide to spray nozzle selection
Spray Catalog A guide to spray nozzle selection A selection guide to nozzles that will optimize your showering applications. How to Use This Catalog How to identify, specify and order Kadant spray nozzles
V GM C4500 C5500
Illustrated Parts List for VMAC System System V900099 2008-2007 GM C4500 C5500 LMM Duramax 6.6L Diesel without dual alternators System V900098 2007-2006 GM C4500 C5500 Duramax 6.6L Diesel without dual
708BS Series Bellows Stem Seal
708BS Series Bellows Stem Seal Fractional Flow Control Valves FRACTIONAL FLOW CONTROL S CRN Registration Number Available Bellows stem seals eliminate fugitive emissions by surrounding the valve stem with
General Specifications
General Specifications Model PR10 ontacting onductivity Retractable fitting On-line measurements always present extra challenges compared to at-line measurements. For example when maintenance needs to
CAPACITIVE: CONTROL CLS2 CLS4 CLS5. Applications liquids / solids liquids / solids solids / granules
CAPACITIVE: CONTROL On/Off Capacitive control is an established and extensively used level control technique. The instrument is composed of an electrode, suitable for the application, and of an electronic
Explosion-Proof Gauge Pressure Transmitter
Technology Solutions T EK-B AR 3120A Explosion-Proof Gauge Pressure Transmitter PRESSURE www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction The Tek-Bar
KF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Bellows are even provided for forming joints with main pipelines or sometimes
Illustrated Parts List for VMAC System V Ford SuperDuty F250-F L Gas V8 Engine
Illustrated Parts List for VMAC System V900112 2014-2011 Ford SuperDuty F250-F350 6.2L Gas V8 Engine 1 - Kit Pack List... 2 2 - Fastener Pack, 3800735, V900112... 4 4 - Compressor Sub Components, P120004...
MicroLab Posts, Bases, and Rails
MicroLab Posts, Bases, and Rails www.mellesgriot.com Stable mounting and positioning are required to build optical systems. In the laboratory, posts and post holders are commonly used for mounting optical
Twist-lock style " or 2" Tri-Grip TM Fitting. PX429S15-015GV, shown smaller than actual size.
Sanitary Pressure Transducers and Transmitters Using Micro-Machined Silicon Technology 10 mv/v, 0 to 5 Vdc, 4 to 20 ma s Gage Pressure: 10 inh 2O to 600 psi (25 mb to 41 bar) Absolute Pressure: 5 to 600
QUALITY PRODUCTS, COMPETITIVE PRICING AND SERVICE BEYOND YOUR EXPECTATIONS Phone (408) Fax (408)
Product Overview Vacuum Components & Bellows Pages 2-6 SSL NW/KF components are a system of stainless steel vacuum flanges for tube sizes from 3/4" through 2" OD. These flanges can operate in high vacuum
SERVICE PARTS MANUAL
SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT
Temperature measurement TER8 Front-flush and low-invasive resistance thermometers
Product highlights 3-A fulfillment without elastomers Front-flush or immersed types Accurate reading independent on ambient temperature Fast response time Hermetically sealed towards process Capable of
VARIOSUB D-SUB 25 Contact Inserts, Sleeve Housings
Contact Inserts, Sleeve Housings Introduction VARIOSUB is a range of plug connectors specially designed for signal and data technology in an industrial environment with high degrees of protection, temperatures
Probe Holder for PR6422 and PR6423
Probe Holder for PR6422 and PR6423 The probe holder permits mounting of eddy current sensors of type PR6422 and PR6423 at machines so that they can be adjusted form outside. The sensors can be changed
Continuous level measurement Ultrasonic transducers
Siemens G 2012 Level measurement Overview EchoMax XPS/XCT transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing
General Specifications
General Specifications Model PR10 ontacting onductivity Retractable fitting On-line measurements often present extra challenges, especially when routine maintenance is required. The PR10 is ideally suitable
Series P. Solvent Weld Sewer Fittings SDR 35. Solvent Weld Sewer Fittings SDR 35 P Series
Solvent ITEM Weld INCHES NUMBER Sewer QTY Fittings QTY PRICE SDR ITEM 35 INCHES NUMBER QTY QTY PRICE Injection Molded in Sizes 3 12 Fabricated in Sizes 10 27 page 27 Phone: 586-781-2700 Toll Free: 1-800-232-5690
Jack Plates. Jack Plates & Accessories PREMIER. PT-625B1 Flush Jack. PREMIER PT-625B3 Flush Jack
Jack Plates PT-625B1 Flush Jack PT-625B1 Flush Jack Flush jack assembly is designed for flush mounting in a standard outlet box. It includes a 625F modular jack, 19A faceplate, 43A bracket, and mounting
Ultima X5000 Round Duct Mount Kit User Instructions
Ultima X5000 Round Duct Mount Kit User Instructions MSA Kit 10179124/10179321 - Ultima X5000 316 Stainless Steel Parts List / Instructions Round Duct Mount Gasket (1) Round Duct Mount Base Plate (1) Base
Description: Detailed procedure on removing old bushing and installing new Brake Bushing Replacement Kit 10447
Procedure: BRAKE BUSHING REPLACEMENT PROCEDURE Product: Document #: Rev: Page: MODEL 7000, 7000A, & 8000 GYRO 078 1 1 of 14 Description: Detailed procedure on removing old bushing and installing new Brake
USB Buccaneer BUCCANEER
Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling USB adaptor Sealing Cap Clip Standard USB O ring maintains IP68 seal at interface Panel gasket
Micro Motion T-Series Coriolis Flow and Density Meters
Product Data Sheet PS-00371, Rev. G October 2011 Micro Motion T-Series Coriolis Flow and Density Meters Micro Motion T-Series meters offer the best performance of any straighttube Coriolis meter. The single
FlexBar HRT Pressure Transmitter
FlexBar HRT Pressure Transmitter 4...0 ma, -wire transmitter, HART communication Some hygienic connections conform to -A standards, FDA demands and EHEDG guidelines Configurable span, unit and damping
Temperature sensors from ifm. Selection guide
Temperature sensors from ifm. Selection guide Temperature sensors www.ifm.com/us WARRANTY years on ifm products Systems for temperature monitoring The optimum solution for every requirement Compact temperature
Installation and Set-up of Dome Camera Wall Arm (Zxx-WM2A)
Installation and Set-up of Dome Camera Wall Arm (Zxx-WM2A) The dome camera wall arm mount is designed to provide a sturdy and aesthetic mounting option for the GANZ ZC-5000, ZC-8000 and ZN-DTxMA series
Level Measurement Continuous level measurement - Ultrasonic transducers
Overview transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing effect reduces blanking distance Optional foam
SERIES 8000-SAN PRESSURE AND LEVEL TRANSMITTERS ALL STAINLESS DESCRIPTION. OUTPUT 4-20 ma / 2-WIRE ZERO AND SPAN ADJUSTABLE
PRESSURE AND LEVEL TRANSMITTERS ALL STAINLESS SERIES 8000-SAN OUTPUT 4-20 ma / 2-WIRE ZERO AND SPAN ADJUSTABLE ALL FORMS OF HYGIENIC/ SANITARY CONNECTIONS AVAILABLE VERY STRONG FLUSH MOUNTING DIAPHRAGM
VAREC 2010B/2020B PRESSURE AND VACUUM RELIEF VALVES
VAREC 0B/B PRESSURE AND VACUUM RELIEF VALVES Weight-loaded relief valves that protect tanks from damage or deformation, minimize emissions to the environment and loss of product due to evaporation FEATURES
Duo-Pro Double Contained Piping Systems
PRO 150x150 Simultaneous Pipe Part Number 5210+(size code) (ft.) L2 (ft.) # Spider Clips 1 x 3 (134) 3.75 2.5 4 2 x 4 (420) 3.50 3.0 4 3 x 6 (531) 5.25 3.0 3 4 x 8 (583) 5.25 3.0 3 6 x 10 (627) 5.25 3.0
Level Measurement Continuous level measurement - Ultrasonic transmitters
Overview Configuration is a short-range integrated ultrasonic level transmitter. It is intrinsically safe (ATEX, CSA, FM, IECEx, NEPSI), 2 wire, to 20 ma loop powered, ideal for liquids, slurries, and
Level Measurement Continuous level measurement - Ultrasonic transmitters
Overview Configuration is a short-range integrated ultrasonic level transmitter. This general purpose, 2-wire, to 20 ma loop powered transmitter is ideal for liquids, slurries, and bulk materials in open
Product Bulletin BPS-100 Revision 2.1 November C l a m p P i p e C o n n e c t o r
Product Bulletin BPS-00 C l a m p P i p e C o n n e c t o r Table of Contents BlueSky Clamp Connector... Industrial Applications... Clamp Connector Description... How the Metal to Metal Seal Works... Design
precision pipe fittings
Precision Pipe Fittings 1 8 to 1 sizes 316 stainless steel, brass, and exotic materials NPT threads HOKE Inc. PO Box 4866 Spartanburg, SC 29305-4866 Phone (864) 574-7966 Fax (864) 587-5608 www.hoke.com
Pressure transmitter/pressure switch PASCAL CS
Pressure transmitter/pressure switch PASCAL CS for food/pharmaceutical/biotechnology,type series CS2110 Features Multifunctional pressure transmitter/pressure switch Hygienic case with no notches or indentations
Bronze Connectors for Flat Bar TYPE HSS. Ordering Information. or
ronze onnectors for Flat ar ronze onnectors for Flat ar TYPE SS Low Mount orizontal us Support low mount horizontal bus support for mounting flat bar to the cap or base of an insulator. For cap mounting
Continuous level measurement Ultrasonic transducers
Siemens G 2012 Level Measurement Overview Echomax XPS/XCT transducers use ultrasonic technology to measure level in a wide range of liquids and solids. Benefits Integral temperature compensation Low ringing
SMK Connectors. General Description. Contents (Click on any line to go to the indicated page) Test Data
SMK Connectors General Description These high-performance SMK (2.92 mm) connectors feature maximum VSWR for cable connectors of 1.15:1 from DC to 18 GHz, and 1.3:1 from 18 to 40 GHz. The maximum VSWR for
Composite Type Rupture Disc
Composite Type Rupture Disc 2-2202-2 COMPOSITE* TYPE RUPTURE DISC What is a Composite Type Rupture Disc? A Composite Type Rupture Disc is a differential pressure relief device used to protect pressurized
PVC HI-STRENGTH SCHEDULE 80 PIPE - PLAIN ENDS
29 PRICE LIST 1 May 2018 Hi-Strength Industrial Piping System Plastic Systems PVC Schedule 80 Piping system is truly an industrial product. Often referred to as Hi Strength PVC, its industrial grade wall
Baumann Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
Preparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat Insert, Full-Bolted, and Union Type Holder
GEP-7004 Rev. L 101251 Ref. ID: 5472 Preparation and Installation of the Composite Type Rupture Disc (Light Lip and Heavy Lip) in 30 Seat Insert, Full-Bolted, and Union Type Holder WARNING USER SHOULD
Installation and Operating Manual FM50 IOM 2-18 DRAFT
Installation and Operating Manual Table of Contents 1. Safety Precautions... 3 2. Details 2.1 Part Numbers... 4 2.2 Configurations... 5 2.3 Specifications... 13 2.4 Cables and Wiring... 14 2.5 Interface,
Echotel Model 910. Installation and Operating Manual. Ultrasonic Level Switch
Echotel Model 910 Installation and Operating Manual Ultrasonic Level Switch Read this Manual Before Installing This manual provides information on the Echotel Model 910 Ultrasonic Liquid Level Switches.