ANACONDA MULTIFLEX CONDUIT TYPE UI
|
|
|
- Lauren Payne
- 5 years ago
- Views:
Transcription
1 ANACONDA MULTIFLEX CONDUIT TYPE UI Very robust, extremely flexible and corrosion resistant Multifl ex type UI is the stainless steel version of type UIG. Extremely fl exible and robust, this fully interlocked, stainless steel AISI-304 in addition to having excellent tensile, torsional and crush strength, it is also high corrosion and oxidation resistant. It is an optimal choice for protection of cables in dynamic motions. Typical applications include: robots in steel and automotive plants, foundries, die casting and metalworking machines, closed circuit TV (CCTV) security recording systems and video cameras, passenger information systems, door locking systems, rail sector Inter locked Material & Construction: Construction: Stainless steel core (AISI-304), fully inter-locked. Special flame properties: Because the UI conduit hose has no cover the fl ame properties according the following standards are valid: - EN (2013): R22 (interior equipment): class HL1, HL2 and HL3. R23 (exterior equipment): class HL1, HL2 and HL3. - BS 6853 (1999): Tabel 7 (Interior): Category 1a, 1b and II vehicle Tabel 8 (Exterior): Category 1a, 1b and II vehicle - London Underground LUL (2011): Tabel 3: Extensive and grouped usage Tabel 4: Limited and dispersed usage Temperature: -100 ºC till +600 ºC. Colour: Metal coloured. Classification according to NEN-EN-IEC 61386: Compression resistance: Class 5, Very Heavy (4000 N). Impact resistance: Class 4, Heavy (6 J). Tensile strength: Class 4, Heavy (1000 N). Protection class: IP 40. UI Diametre Bending radius (cl) Standard carton Small carton Reel Weight Size Inside Outside Static Dynamic Metre Article No. Metre Article No. Metre Article No. (Kg/m) (Inch) (mm) (mm) (mm) (mm) 5/16 9,5 12, ,17 3/8 13,0 16, ,27 1/2 17,0 21, ,34 3/4 22,0 26, , ,0 30, ,53 1.1/4 34,0 39, ,73 1.1/2 40,3 44, , ,6 55, ,34 The fittings for UI are outlined on pages 1-30 till ISO Pg NPT UI - 5/16 3/8 1/2 3/ /4 1 1/ M16-M20 M16-M20 M20 M25 M32 M40 M50 M , /2 1/2 3/ /4 1 1/
2 COMPACT FITTINGS FOR UI/UIG, IP 40, NICKEL PLATED BRASS compact fi ttings, IP 40, nickel plated brass for UI and UIG These compact nickel plated brass fi ttings are the same as used in chapter 5 (compact Sealtite). By replacing the standard polyamide clamping ring and stamped metal ferrule with a metal clamping ring and machine turned ferrule (see connection sets below) they suitable to be used in combination with UIG and UI conduits. By using the UIG/UI connection sets, a very high pull-out strength is achieved. The high quality fi nish of these nickel plated brass fi ttings gives them a good protection against corrosion and a nice appearance. Material & Construction: Construction: Nickel plated brass fi tting, consisting of 4 parts (counter nut, clamping ring, ferrule and body). Connection set, nickel plated brass, for combination with type UI and UIG Thread UIG / UI Min. Internal Fitting thread size Standard Article Weight Size (inch) Bore (mm) ISO Pg NPT Package Number (Kg/100) - 5/16 6,8 M16 x 1,5 Pg 11 1/2 NPT ,2-3/8 9,8 M16 x 1,5 Pg 11 1/2 NPT ,0-1/2 13,9 M20 x 1,5 Pg 16 1/2 NPT ,4-3/4 18,5 M25 x 1,5 Pg 21 3/4 NPT ,8-1 22,8 M32 x 1,5 Pg 29 1 NPT ,0-1.1/4 30,8 M40 x 1,5 Pg /4 NPT ,8-1.1/2 36,9 M50 x 1,5 Pg /2 NPT ,4-2 47,9 M63 x 1,5 Pg 48 2 NPT ,2-2.1/2 - M75 x 1,5-2.1/2 NPT * 14,0-3 - M90 x 2,0-3 NPT * 20,0 * Set consists of a clamping ring only, because the standard ferrules of the compact fi ttings for sizes 2.1/2 till 3 can be used also for UIG conduit 2.1/2 till 3. ISO straight compact fitting, male, nickel plated brass The clamping rubbers of the cable hose fi ttings are made from EPDM. Special approvals: The cable-hose fi ttings have clamping rubbers from fl ame retardant V0-rated EPDM and are HL 1, HL 2 and HL 3 according EN , R22 and R23. Temperature: -55 C till +260 ºC continuous. Cablehose fi ittings are from -55 C till +125 ºC continuous. Protection class: IP 40. Cable hose fi ttings are IP 68 on the switchbox. Colour: Metal coloured. The above mentioned connection sets for UIG and UI can be used with all types of compact fittings, as outlined in chapter 5. ISO Size (inch) Bore (mm) A B C D E Package Number (Kg/100) M16 x 1,5 5/16 6, ,1 M20 x 1,5 5/16 6, ,2 M16 x 1,5 3/8 9, ,9 M20 x 1,5 3/8 9, ,0 M20 x 1,5 1/2 13, ,8 M25 x 1,5 3/4 18, ,4 M32 x 1,5 1 22, ,7 M40 x 1,5 1.1/4 30, ,8 M50 x 1,5 1.1/2 36, ,7 M63 x 1,5 2 47, ,8 M75 x 1,5 2.1/2 60, ,8 M90 x 2,0 3 75,
3 COMPACT FITTINGS FOR UI/UIG, IP 40, NICKEL PLATED BRASS ISO cable-hose fitting, compact, male, double seal acc. EN , HL1 / HL2 / HL 3, table R22 and R23 Thread UIG / UI Clamping Dimensions in mm Standard Article Weight ISO Size (inch) range (mm) A B C E F Package Number (Kg/100) M16 x 1,5 5/16 4,0-6, ,0 M20 x 1,5 5/16 4,0-6, ,6 M16 x 1,5 3/8 4,0-9, ,8 M20 x 1,5 3/8 4,0-9, ,4 M20 x 1,5 1/2 6,0-13, ,0 M25 x 1,5 1/2 6,0-13, ,4 M25 x 1,5 3/4 11,0-18, ,5 M32 x 1,5 3/4 11,0-18, ,8 M32 x 1,5 1 16,0-22, ,3 M40 x 1,5 1 16,0-22, ,5 M40 x 1,5 1.1/4 22,0-30, ,4 ISO straight swivel fitting, male, nickel plated brass ISO Size (inch) Bore (mm) A B C E F Package Number (Kg/100) M16 x 1,5 5/16 6, ,3 M16 x 1,5 3/8 9, ,1 M20 x 1,5 1/2 13, ,6 M25 x 1,5 3/4 17, ,6 M32 x 1,5 1 22, ,5 M40 x 1,5 1.1/4 29, ,8 M50 x 1,5 1.1/2 36, ,2 M63 x 1,5 2 47, ,0 ISO 90 fitting, compact, male, nickel plated brass ISO Size (inch) Bore (mm) A B C D E Package Number (Kg/100) M16 x 1,5 5/16 6, ,8 M20 x 1,5 5/16 6, ,1 M16 x 1,5 3/8 9, ,6 M20 x 1,5 3/8 9, ,9 M20 x 1,5 1/2 13, ,6 M25 x 1,5 3/4 18, ,0 M32 x 1,5 1 22, ,8 M40 x 1,5 1.1/4 30, ,9 M50 x 1,5 1.1/2 36, ,9 M63 x 1,5 2 47, ,8 1-31
4 COMPACT FITTINGS FOR UI/UIG, IP 40, NICKEL PLATED BRASS ISO 90 swivel fitting, compact, male, nickel plated brass ISO Size (Inch) Bore (mm) A B C D E F Package Number (Kg/100) M16 x 1,5 5/16 6, ,0 M16 x 1,5 3/8 9, ,8 M20 x 1,5 1/2 13, ,6 M25 x 1,5 3/4 17, ,6 M32 x 1,5 1 22, ,4 Pg straight compact fitting, male, nickel plated brass Thread UI / UIG Min. Internal Dimensions in mm Standard Article Weight Pg Size (Inch) Bore (mm) A B C D E Package Number (Kg/100) Pg 11 3/8 9, ,0 Pg 13,5 3/8 9, ,2 Pg 16 1/2 13, ,9 Pg 21 3/4 18, ,3 Pg , ,2 Pg /4 30, ,2 Pg /2 36, ,7 Pg , ,8 Pg 90 fitting, compact, male, nickel plated brass Thread UI / UIG Min. Internal Dimensions in mm Standard Article Weight Pg Size (Inch) Bore (mm) A B C D E Package Number (Kg/100) Pg 11 3/8 9, ,7 Pg 13,5 3/8 9, ,0 Pg 16 1/2 13, ,6 Pg 21 3/4 18, ,5 Pg , ,6 Pg /4 30, ,9 Pg /2 36, ,9 Pg , ,3 1-32
5 COMPACT FITTINGS FOR UI/UIG, IP 40, NICKEL PLATED BRASS NPT straight compact fitting, male, nickel plated brass Thread UI / UIG Min. Internal Dimensions in mm Standard Article Weight NPT Size (Inch) Bore (mm) A B C D E Package Number (Kg/100) NPT 1/2 3/8 9, ,4 NPT 1/2 1/2 13, ,4 NPT 3/4 3/4 18, ,8 NPT , ,6 NPT 1.1/4 1.1/4 30, ,6 NPT 1.1/2 1.1/2 36, ,2 NPT , ,4 NPT 2.1/2 2.1/2 60, ,6 NPT , NPT 90 fitting, compact, male, nickel plated brass Thread UI / UIG Min. Internal Dimensions in mm Standard Article Weight NPT Size (Inch) Bore (mm) A B C D E Package Number (Kg/100) NPT 1/2 3/8 9, ,2 NPT 1/2 1/2 13, ,0 NPT 3/4 3/4 18, ,5 NPT , ,3 NPT 1.1/4 1.1/4 30, ,2 NPT 1.1/2 1.1/2 36, ,5 NPT , ,0 NPT 2.1/2 2.1/2 60, NPT , Conduit connector, nickel plated brass UI / UIG UI / UIG Min. Internal Dimensions in mm Standard Article Weight Size (Inch) Size (Inch) Bore (mm) A B C D E Package Number (Kg/100) 5/16 5/16 6, ,8 3/8 3/8 9, ,4 1/2 1/2 13, ,6 3/4 3/4 18, , , ,2 1.1/4 1.1/4 30, ,2 1.1/2 1.1/2 36, , , ,3 1-33
6 FITTINGS FOR UI/UIG, IP 40, NICKEL PLATED BRASS standard fi ttings, IP 40, nickel plated brass for Multitite UI and UIG These standard nickel plated brass fi ttings are the same as used in chapter 5 (standard Sealtite). By replacing the standard polyamide clamping ring and the ferrule with a metal clamping ring and machine turned ferrule (see connection sets below) they are suitable to be used in combination with UIG and UI conduits. By using the UIG/ UI connection sets, a very high pull-out strength is achieved. The high quality fi nish of these nickel plated brass fi ttings gives them a good protection against corrosion and a nice appearance. Material & Construction: Construction: Nickel plated brass fi tting, consisting of 4 parts (counter nut, clamping ring, ferrule and body). Material: Counter nut, clamping ring, ferrule and body are nickel plated brass. Inserts are from PA6 (red for ISO metric, blue for Pg and white for NPT). Temperature: -55 C till +260 ºC continuous (for cable-hose fi ttings with NBR seal -40 C till +100 C). Protection class: IP 40. Cable-hose fi ttings are IP 68 on the switchbox. Colour: Metal. Connection set, nickel plated brass, for combination with type UI and UIG Thread UIG / UI Min. Internal Fitting thread size Standard Article Weight Size (inch) Bore (mm) ISO Pg NPT Package Number (Kg/100) - 5/16 6,8 M16 x 1,5 Pg 11 1/2 NPT ,2-3/8 9,8 M16 x 1,5 Pg 11 1/2 NPT ,0-1/2 13,9 M20 x 1,5 Pg 16 1/2 NPT ,4-3/4 18,5 M25 x 1,5 Pg 21 3/4 NPT ,8-1 22,8 M32 x 1,5 Pg 29 1 NPT ,0-1.1/4 30,8 M40 x 1,5 Pg /4 NPT ,8-1.1/2 36,8 M50 x 1,5 Pg /2 NPT ,4-2 47,8 M63 x 1,5 Pg 48 2 NPT ,2 The above mentioned connection sets for UIG and UI can be used with all types of standard fittings, as outlined in chapter 5. ISO straight fitting, male, nickel plated brass ISO Size (inch) Bore (mm) A B C D E Package Number (Kg/100) M16 x 1,5 5/16 6, ,2 M20 x 1,5 5/16 6, ,5 M16 x 1,5 3/8 9, ,4 M20 x 1,5 3/8 9, ,7 M20 x 1,5 1/2 13, ,7 M25 x 1,5 3/4 18, ,9 M32 x 1,5 1 22, ,1 M40 x 1,5 1.1/4 30, ,7 M50 x 1,5 1.1/2 36, ,9 M63 x 1,5 2 47, ,9 1-34
7 FITTINGS FOR UI/UIG, IP 40, NICKEL PLATED BRASS ISO straight fitting, female, nickel plated brass ISO Size (inch) Bore (mm) A B C D E Package Number (Kg/100) M16 x 1,5 5/16 6, ,4 M16 x 1,5 3/8 9, ,6 M20 x 1,5 1/2 13, ,4 M25 x 1,5 3/4 18, ,0 M32 x 1,5 1 22, ,9 M40 x 1,5 1.1/4 30, ,1 M50 x 1,5 1.1/2 36, ,8 M63 x 1,5 2 47, ,2 ISO cable-hose fitting, male, nickel plated brass Thread UI/UIG Clamping Dimensions in mm Standard Article Weight ISO Size (inch) Range (mm) A B C E F Package Number (Kg/100) M16 x 1,5 5/16 3-6, ,4 M16 x 1,5 3/8 3-9, ,2 M20 x 1,5 3/8 6-9, ,9 M20 x 1,5 1/2 7-13, ,6 M25 x 1,5 3/ ,8 M32 x 1, , ,0 M40 x 1,5 1.1/ , ,4 M50 x 1,5 1.1/ , ,8 M63 x 1, , ,8 ISO cable-hose fitting, male, nickel plated brass, silicone clamping rubber up to max +220 C Thread UI/UIG Clamping Dimensions in mm Standard Article Weight ISO Size (inch) Range (mm) A B C E F Package Number (Kg/100) M16 x 1,5 5/ ,4 M16 x 1,5 3/ ,4 M20 x 1,5 1/2 4, ,5 M25 x 1,5 1/ ,5 1-35
8 FITTINGS FOR UI/UIG, IP 40, NICKEL PLATED BRASS Pg straight fitting, male, nickel plated brass Pg Size (inch) Bore (mm) A B C D E Package Number (Kg/100) Pg 9 5/16 6, ,4 Pg 11 5/16 6, ,2 Pg 9 3/8 9, ,4 Pg 11 3/8 9, ,2 Pg 13,5 3/8 9, ,2 Pg 16 1/2 13, ,1 Pg 21 3/4 18, ,4 Pg , ,6 Pg /4 30, ,4 Pg /2 36, ,8 Pg , ,4 Pg straight fitting, female, nickel plated brass Pg Size (inch) Bore (mm) A B C D E Package Number (Kg/100) Pg 11 5/16 6, ,7 Pg 13,5 5/16 6, ,2 Pg 11 3/8 9, ,9 Pg 13,5 3/8 9, ,4 Pg 16 1/2 13, ,1 Pg 21 3/4 18, ,3 Pg , ,3 Pg /4 30, ,1 Pg /2 36, ,8 Pg , ,2 Pg cable-hose fitting, male, nickel plated brass Thread UI/UIG Clamping Dimensions in mm Standard Article Weight Pg Size (inch) Range (mm) A B C E F Package Number (Kg/100) Pg 9 5/16 4-6, ,2 Pg 9 3/ ,4 Pg 11 3/8 5-9, ,1 Pg 13,5 1/ ,5 Pg 16 1/ , ,5 Pg 21 3/ ,6 Pg , ,0 1-36
9 FITTINGS FOR UI/UIG, IP 40, NICKEL PLATED BRASS Pg cable-hose fitting, male, nickel plated brass, silicone clamping rubber up to max +220 C Thread UI/UIG Clamping Dimensions in mm Standard Article Weight Pg Size (inch) Range (mm) A B C E F Package Number (Kg/100) Pg 11 3/8 5-9, ,1 Pg 13,5 1/ ,5 Pg 16 1/2 8-13, ,5 Pg 21 3/ ,6 NPT straight fitting, male, nickel plated brass NPT Size (inch) Bore (mm) A B C D E Package Number (Kg/100) 1/2 NPT 5/16 6, ,0 1/2 NPT 3/8 9, ,2 1/2 NPT 1/2 13, ,0 3/4 NPT 3/4 18, ,9 1 NPT 1 22, ,6 1.1/4 NPT 1.1/4 30, ,8 1.1/2 NPT 1.1/2 36, ,4 2 NPT 2 47, ,9 NPT straight fitting, female, nickel plated brass NPT Size (inch) Bore (mm) A B C D E Package Number (Kg/100) 1/2 NPT 5/16 6, ,7 1/2 NPT 3/8 9, ,9 1/2 NPT 1/2 13, ,0 3/4 NPT 3/4 18, ,0 1 NPT 1 22, ,3 1.1/4 NPT 1.1/4 30, ,1 1.1/2 NPT 1.1/2 36, ,4 2 NPT 2 47, ,7 1-37
10 COMPACT FITTINGS FOR UI, IP 40, STAINLESS STEEL AISI-304 compact fittings, IP 40, stainless steel AISI-304 for Multitite UI The compact stainless steel AISI-304 are the same as used in chapter 5 (compact Sealtite). By replacing the standard polyamide clamping ring and stamped metal ferrule with a metal clamping ring and machine turned ferrule (see connection sets below) they suitable to be used in combination with UIG and UI conduits. By using the UIG/ UI connection sets, a very high pull-out strength is achieved. The high quality fi nish of these nickel plated brass fi ttings gives them a very good protection against corrosion and a nice appearance. Material & Construction: Construction: Stainless steel AISI-304 fi tting, consisting of 4 parts (counter nut, clamping ring, ferrule and body). Temperature: -55 C till +260 ºC continuous. Protection class: IP 40. Colour: Metal coloured. Connection set, nickel plated brass, for combination with type UI Thread UI Min. Internal Fitting thread size Standard Article Weight Size (inch) Bore (mm) ISO Pg NPT Package Number (Kg/100) - 5/16 6,8 M16 x 1,5 Pg 11 1/2 NPT ,2-3/8 9,8 M16 x 1,5 Pg 11 1/2 NPT ,0-1/2 13,9 M20 x 1,5 Pg 16 1/2 NPT ,4-3/4 18,5 M25 x 1,5 Pg 21 3/4 NPT ,8-1 22,8 M32 x 1,5 Pg 29 1 NPT ,0-1.1/4 30,8 M40 x 1,5 Pg /4 NPT ,8-1.1/2 - M50 x 1,5 Pg /2 NPT * 4,2-2 - M63 x 1,5 Pg 48 2 NPT * 9,0 * Set consists of a clamping ring only, because the standard ferrules of the compact fi ttings for sizes 1.1/2 and 2 can be used also for UI conduit 1.1/2 and 2. The above mentioned connection sets for UI can be used with all types of compact fittings, as outlined in chapter 5. ISO straight compact fitting, male, stainless steel AISI-304 Thread UI Min. Internal Dimensions in mm Standard Article Weight ISO Size (inch) Bore (mm) A B C D E Package Number (Kg/100) M16 x 1,5 5/16 6, ,1 M20 x 1,5 5/16 6, ,2 M16 x 1,5 3/8 9, ,9 M20 x 1,5 3/8 9, ,0 M20 x 1,5 1/2 13, ,8 M25 x 1,5 3/4 18, ,4 M32 x 1,5 1 22, ,7 M40 x 1,5 1.1/4 30, ,8 M50 x 1,5 1.1/2 36, ,5 M63 x 1,5 2 47, ,6 1-38
11 COMPACT FITTINGS FOR UI, IP 40, STAINLESS STEEL AISI-304 ISO 90 fitting, compact, male, stainless steel AISI-304 Thread UI Min. Internal Dimensions in mm Standard Article Weight ISO Size (Inch) Bore (mm) A B C D E Package Number (Kg/100) M16 x 1,5 3/8 9, ,6 M20 x 1,5 3/8 9, ,9 M20 x 1,5 1/2 13, ,6 M25 x 1,5 3/4 18, ,0 M32 x 1,5 1 22, ,8 M40 x 1,5 1.1/4 30, ,9 M50 x 1,5 1.1/2 36, ,7 M63 x 1,5 2 47, ,6 NPT straight compact fitting, male, stainless steel AISI-304 Thread UI Min. Internal Dimensions in mm Standard Article Weight NPT Size (Inch) Bore (mm) A B C D E Package Number (Kg/100) NPT 1/2 3/8 9, ,4 NPT 1/2 1/2 13, ,4 NPT 3/4 3/4 18, ,8 NPT , ,6 NPT 1.1/4 1.1/4 30, ,6 NPT 1.1/2 1.1/2 36, ,0 NPT , ,2 NPT 90 fitting, compact, male, stainless steel AISI-304 Thread UI Min. Internal Dimensions in mm Standard Article Weight NPT Size (Inch) Bore (mm) A B C D E Package Number (Kg/100) NPT 1/2 3/8 9, ,2 NPT 1/2 1/2 13, ,0 NPT 3/4 3/4 18, ,5 NPT , ,3 NPT 1.1/4 1.1/4 30, ,2 NPT 1.1/2 1.1/2 36, ,5 NPT , ,8 1-39
M10 / M12 M12 / M16 M16 / M20 M20 M20 M25 M32 M40 M50 / M / 13,5 13,
Multitite F grey: Light and flexible. Type F is, among others, being used in the buildingindustry, connection of control panels and protection against rodents. F is applied for quick and easy mounting
CONDUIT SYSTEMS FOR ELECTRICAL WIRES AND CABLES: ANACONDA SPECIAL FITTING SOLUTIONS
ONDUIT SYSTMS FOR LTRIAL WIRS AND ALS: FITTING SOLUTIONS Fitting selection table Anaconda special fittings. Fitting Material Temperature ( ) Thread size range Shielding Approvals Protection Page Type Housing
Catalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
PL Nickel-Plated Brass Spigot Fitting Range
P Nickel-Plated Brass Spigot itting Range P nickel-plated Brass Spigot ittings Stud ittings BP 3BP 4BP BSPP 8BP Metric BP 3BP 4BP BSPP 8BP Metric RBP R3BP SBP S3BP Banjo itting Tube-to-Tube ittings omplementary
Cable Glands 757, BVE and 737 Series: Blanking Plugs, Adaptors and Reducers Increased Safety and Flameproof
757 Series Blanking Plugs 737 Series Adaptors and Reducers BVE Series Plastic Blanking Plugs & Sealing Washers Compliance Data: 757 Series Blanking Plugs: ATEX IECEx CE Ex d IIC or Ex e II Ex td A21 IP
Han PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
Conduit & fittings. Ideal for use wherever heavy duty mechanical protection is required. apsindustrial.com.au
Conduit & fittings Ideal for use wherever heavy duty mechanical protection is required apsindustrial.com.au history of APS industrial APS Industrial was formed in 2018 incorporating the established businesses
VF CNM5MM-L100. Accessories. M12 male connectors. Code structure. M 12x1
Accessories M male connectors These standard M male connectors are ready for the installation on the switches. Their wires have the right length for the connection to the contact blocks and are provided
Key features: M5 Series. Buccaneer. Full Contact Diagrams Page 120
The most compact connector type in the MSeries range, Bulgin s waterproof M5 sensor connectors come in straight and angled forms with or overmolded cable option s and a variety of panel mount receptacles.
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Non-Drip Quick Connect Couplings
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application ^ Innovative Products for Demanding Applications Innovative Couplings for Fluid Applications
3S 1 13,5 1/4 3013, /8 1/ ,2 3/8 3017, / ,3 1/2 4021,3
DIN 3015, Part 2 Components: Dimensions / Order Codes Clamp Body ød1 S 1 Clamp Body One clamp body is consisting of two clamp halves. Colour: reen Material code: PP Colour: Black Material code: PA (87
07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
Cable Glands. Description Introduction to Cable Glands 399. EEXe Series EEXe Series. A2F, E1FX/E2FX, E1FW/E2FW and T3 Series
Description Page Introduction to Cable Glands 399 EEXe Series 400-401 Polyamide Cable Glands for Unarmored Cable Increased Safety EEXe Series Ex e Certified Ex I Application Entry Thread Seal A2F, E1FX/E2FX,
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application. non-drip
Non-Drip Quick Connect Couplings Modular constructions offering just the right coupling for every fluid application non-drip 2 Innovative Products for Demanding Applications Innovative Couplings for Fluid
Easy Flow Indicator Magnetisch-Induktiver Durchflussmesser. Type 8024 For Insertion Fittings. Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI
Analog Flow Rate Indicator, 1/2"-16"; P=87 PSI Advantages / Benefits Reduced costs of ownership up to 6% Economic integration in pipe systems without any additional piping Shows flow rate with a clear,
M12 connector D-coding M12 connector X-coding RJ45 IP20 connector PushPull RJ45 IP65 / IP67 connector
M12 connectors Directory Chapter Page General information....02 M12 connector D-coding....06 M12 connector X-coding....20 RJ45 IP20 connector....27 PushPull RJ45 IP65 / IP67 connector....46 Han 3 A RJ45
D-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
sales@jumo.co.uk info.us@jumo.net Page /0 JUMO MIDAS C08 OEM Pressure Transmitter Basic Applications compressors machinery and plant engineering industrial pneumatics commercial vehicles building technology
BS EN Class H, BS 7430 UL467 (CR105) Tightening torque 15 Nm mm mm kg CR525
Rod to tape clamp (type A) Nominal rod Max. conductor 1 2 12.7 mm 26 x 12 mm 0.1 kg CR10 8 16 mm 26 x 12 mm 0.1 kg CR10 4 20 mm 26 x 10 mm 0.1 kg CR10 8 16 mm 0 x 2 mm 0.16 kg CR108 4 20 mm 0 x 2 mm 0.16
Code Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)
411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption
Providing flexible power supply and signal connection there, where it is needed even in hazardous areas for the Zones 1and 2.
e X L i n k exlink 7-pole / 6-pole + PE for Zone 1 and Zone 21 Providing flexible power supply and signal connection there, where it is needed even in hazardous areas for the Zones 1and 2. The exlink 7
DMP 333 DMP 333. Industrial Pressure Transmitter For High Pressure. Stainless Steel Sensor. Pressure Transmitter. Industrial
DMP Industrial Pressure Transmitter For High Pressure Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 / 0. % FSO Industrial Pressure Transmitter DMP Nominal pressure
Terminals, Lugs, and Fasteners
Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying
PureFlow PEX Crimp Fittings Most widely recognized fitting system in North America
PureFlow Fittings Most widely recognized fitting system in North America 176 PureFlow Stock Fittings PEX CRIMP RINGS These copper crimp rings provide a secure connection for the Viega system. Use only
BSP & HOSE Fittings M5, 1/8... 1
SP & HOS Fittings M5, 1/8... 1 Very compact units asy tube insertion for rapid assembly of pneumatic circuits Positive tube anchorage All taper threads pre-coated with non-ptf based sealant Straight Adaptors
TWIN SERIES CLAMPS. TWIN Series Clamps. Order codes p 26. Dimensions p 28. Mounting example p 31. Aluminium Twin Series Clamps p 32
TWIN eries Clamps TWIN ERIE CAMP Order codes p 26 imensions p 28 Mounting example p 31 Aluminium Twin eries Clamps p 32 PIPE CAMP - TWIN ERIE Order s PIPE CAMP MARIA PP: Polypropylene material Colour Blue
Terminal Boxes Series 8118
> Enclosure made of glass fibre reinforced polyester resin > sizes available > Terminals and cable glands fitted to order > Enclosure design with integrated metal bracket for metal cable glands. > Degree
Clamps with RUBBER BUSHING
Clamps with RUBBER BUSHING Order Codes and dimensions Standard series DIN 3015, Part 1 p 34 Order Codes and dimensions Heavy series DIN 3015, Part 2 p 35-36 clamps with rubber bushing Mounting example
21D Allfluid pressure switch, electromechanically actuated
D > > 0,... 0, bar (0,... psi), G/, / NPT > > High accuracy > > High number of switching cycles > > Microswitch approved by UL and CSA > > Fixed or adjustable hysteresis > > Shock and vibration tested
Connectivity Products
Cable Glands Strain Relief Snap-In Labels Lock Nuts Torque Wrench Protective Sleeves U2 U5 U5 U6 U7 U8 Features NPT and PG thread cable glands in nylon or metal materials Locknuts in multiple thread sizes
CABLE GLANDS. Tab 7. Delta Sama Jaya Sdn. Bhd. (DSSB) Tel: , Fax:
CABLE GLANDS Tab 7 BRASS CABLE GLANDS "CW" TYPE C/W LOCK NUT DSSB-CG-CW20S DSSB-CG-CW20L DSSB-CG-CW25S DSSB-CG-CW25L DSSB-CG-CW32S DSSB-CG-CW32L DSSB-CG-CW40S DSSB-CG-CW40L DSSB-CG-CW50S DSSB-CG-CW50L
PNEUMATIC TUBING FITTING
2011 PNEUMATIC TUBING FITTING CATALOGUE FLYTECH ENGINEERING SDN BHD GENERAL INFORMATION Flytech had cooperated with ISAIAH GROUP from Taiwan to promote the Pneumatic Fitting & Tubing. The company takes
Environmentally Sealed
Weather-Pack 16 Metri-Pack 19 AMP Superseal 24 Ampseal 16 27 M12 Network 30 DIN Connectors 31 Schlemmer / Din Conduit Sealed 32 Schlemmer / Din Contact Sealed 34 Ideal for applications requiring protection
Rational supply for tools at work stations
hose reels automatic hose reels Rational supply for tools at work stations Automatic hose reels are essential basic equipment for workshops. They save time and improve comfort and safety when using flexible
Technical Informa on Codes Packing Informa on Thread Type
GLANS PLASTIC CABLE GLANS Technical etails Body PA 6 (Polyamide 6) Cap PA 6 (Polyamide 6) Seal CR (Chloroprene Rubber) Flammability V2 (According to UL 94) Protec on Class IP 68-5 Bar Opera ng Permanent
Load Disconnect Switches and Motor Switches
Load Disconnect Switches and Motor Switches 594 Load Disconnect Switches and Motor Switches Contents Load Disconnect Switches and Motor Switches Safety Switches made of Resin 10, 12/16, 16, 20, 25, 40,
Temperature probes 468 Hans Turck GmbH & Co. KG Tel Fax Edition I/
468 Hans Turck GmbH & Co. KG Tel. +49 208 49 52-0 Fax +49 208 49 52-264 Temperature probe a Temperature probes TP series TP series Highest possible flexibility A temperature probe has to be flexible and
07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215
HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm
JUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Data Sheet 4000 Page /0 JUMO MIDAS C08 OEM Pressure Transmitter Basic Applications compressors machinery and plant engineering industrial pneumatics commercial vehicles building technology Brief description
Series Variations. General Purpose Fittings Series. Fittings & Tubing. Fittings. One-touch Fittings KQ2 Series. One-touch Fittings KQ2 Series
& One-touch connection and release Possible to use in vacuum to 00 kpa ø2 Sealant/Gasket seal Metric size tube/m, R, Rc thread connection M3 M6 2 General Purpose Series Face seal Metric size tube/g thread
Compression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
Gas-actuated thermometer Stainless steel version Model 73
Temperature Gas-actuated thermometer Stainless steel version Model 73 WIKA data sheet TM 73.01 for further approvals see page 15 Applications General process instrumentation in the chemical and petrochemical
Setting Standards. Cable Glands Cable Protection
Setting Standards Cable Glands Cable 2013 Setting Standards UMMEL 2 hummel.com your website! Online Catalog Product Pictures and Product Information Product and Assembly Videos Assembly and Operations
Standard Series Standard
Standard Series Standard Technical Data Coupler connector, cable connector and coupler connector rectangular housing Locking screw connection Protection IP 50 to IP 54 with conexil in the housing, flat-gasket
Proximity sensors SME-8M, for T-slot Technical data Magnetic reed
Function e.g., 3-wire, with cable e.g., 3-wire, with plug Magnetic reed measuring principle Insertable in the slot from above, does not protrude over the cylinder profile Cable clip and inscription labels
Cable Glands Cable Protection
Cable Glands Cable 2 UMMEL hummel.com your website! Online Catalog Product Pictures and Product Information Product and Assembly Videos Assembly and Operations Manual Technical drawings 3D data Certificates
Han-Brid. Contents Han-Brid Features Han-Brid Data interfaces Han-Brid Overview Han-Brid Cu
Contents Page Features... 19.02 Data interfaces... 19.03 Overview... 19.04 Cu... 19.06 F.O.... 19.08 Quintax 3 A... 19.10 RJ45 C... 19.12 USB / FireWire... 19.14 Han 4 A SC... 19.16 Hoods/Housings... 19.18
Supplementary instructions. Plug connector Harting HAN 7D. For point level sensors. Document ID: 34456
Supplementary instructions Plug connector Harting HAN 7D For point level sensors Document ID: 446 Contents Contents For your safety.... Appropriate use.... General safety instructions.... Safety instructions
Connect. Cable glands, locknuts and accessories
Connect Cable glands, locknuts and accessories 234 Our range of xxxxxxxxxx cable glands has been expanded to offer the most high quality glands available. Our wide range includes BW, CW, and A1/A2 gland
Better all-round. DataVoice Circular connectors STX M12x1 IP67 Connector series for industrial applications. PoE+ 10 GBE. coded.
Better all-round. X coded D coded 10 GBE PoE+ DataVoice Circular connectors STX M12x1 IP67 Connector series for industrial applications STX M12x1 IP67 connector series With the STX M12x1 IP67 connector
Assembly instructions VOSS quick connect system 203 N
Assembly instructions VOSS quick connect system 203 N The optimized classic A. Important notices Please observe before using the quick connect system VOSS quick connect system 203 N is suitable for air
1COMPRESSION FITTINGS
SECTION 1COMPRESSION FITTINGS TECHNICAL INFORMATION Wade Couplings consistently produce cost effective, reliable leak-tight joints. All Wade couplings are specially designed for use with Wade nuts and
EFP SERIES FLAMEPROOF ELECTRICAL CONNECTORS FOR HAZARDOUS ENVIRONMENTS
EFP SERIES FLAMEPROOF ELECTRICAL CONNECTORS FOR HAZARDOUS ENVIRONMENTS Table of Contents EFP Introduction 4 Connector Features 5-7 Code Logic 8 Inline Plug w Threaded Entry Metric 9 Inline Plug w Mechanical
Rotary Position Technology Incremental Encoders
-40 to 85 C IP Safety-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Optical sensor
TURCK Industrial Connectivity Products
TURCK Industrial Connectivity Products General Accessories Liquid Tight Strain Relief Cable Glands Lock Nuts Page R2 - R4 Page R6 Snap-in Labels Strain Relief Cord Grips Page R5 Page R5 Protective Sleeving
Supplementary instructions. Plug connector Harting HAN 8D. for continuously measuring sensors. Document ID: 30376
Supplementary instructions Plug connector Harting HAN 8D for continuously measuring sensors Document ID: 30376 Contents Contents 1 For your safety 1.1 Appropriate use... 3 1.2 Impermissible use... 3 1.3
RoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
Flow. Flow. N/en
/ poppet valves electromagnetic actuated, directly controlled G /4 or /4 NPT Working from 0 bar up Short switching times Suited for fine vacuum down to, 0 - mbar For a.c. solenoid systems with integrated
M23 Connectors and cables
Contents Product Description: SAI M23 Connectors.2 Contact assignment.7 Technical data.8 Overview.10 M23 connector for signal transmission.12 M23 connector for power transmission.18 Moulded M23 cables.22
FISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
EN3 SERIES WEATHERTIGHT CONNECTORS NEW PRODUCT BULLETIN 602
FEATURES & BENEFITS Sealed to IP68 NEMA 250 (6P) Patented grommet & o-ring free design Available in ribbed or winged coupling ring Cable, panel & cable to cable options Gold plated contacts standard Solder,
Float Flow Meter. Flow measurement for translucent liquids and gases DN10 to DN65 mm. Technical data Orifice DN 10 to 65
Float Flow Meter Flow measurement for translucent liquids and gases DN10 to DN65 mm If a medium sufficient flow rate flows from bottom to top through a vertically inserted measuring tube, then the floated
Q-Flow product information. Variable area flowmeters for gases and liquids
Q-Flow product information Variable area flowmeters for gases and liquids MyScale Air mm ALU Attractive design and price: Variable area flowmeters Q-Flow The proven variable area flowmeter with compact,
Emergency Luminaire for Fluorescent Lamps Series EXLUX 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
SMA Series. Specification. Description. Applications Civil & Military Telecommunication Instrumentation SMA SMA. Interface Mating Dimensions
Series Specification 50 ohm 0-18 GHZ connectors are adaptable to interconnection requirements of both systems and components. S-Conn offers a wide variety of cable connectors, receptacles, feed thrus,
Encoders Absolute Singleturn Encoder Types A58CS8
Types A58CS8 Sturdy design with hardened bearings High rotation speed -40...+80 C/-40...+76 F operating temperature range High shock and vibration resistance Magnetic field proof also available as explosion
Temperature Measurement SITRANS TS300
Siemens AG 018 For food, pharmaceuticals and biotechnology modular design Dimensional drawings Cable gland M1x1.5 for cable Ø 3... 6.5 (0.1... 0.6) Ø 60 (.36) Ø d = N + H 1 Ø 50.5 (1.99) U X H 1 N H Ø
HARTING. Interface Connectors. People Power Partnership
11 5 HARTING Interface Connectors People Power Partnership Directory chapter 00 Modular metric high speed connectors, 2.0 mm pitch Page connector system general information......................... 00.04
Ethernet Series. Etherplug Etherlink V Etherlink V Specifications Ethernet Series
Etherplug... 10-113 Etherlink V3...114-116 Etherlink V1... 117-120 Specifications..121-122 107 Mencom Corporation TEL: 770-534-455 www.mencom.com Etherplug Cordsets PVC & PUR Cable Pole PVC Version of
COMPLETE SOLUTIONS CABLE GLANDS.
COMPLETE SOLUTIONS CABLE GLANDS STAINLESS STEEL, NICKEL-PLATED BRASS AND POLYAMIDE CABLE GLANDS 4 STAINLESS STEEL CABLE GLANDS 5 METRIC STAINLESS STEEL AISI 304 AND 316 CABLE GLANDS IP68 5 METRIC EMC STAINLESS
Connector System for Fluorescent Lighting Fixtures. Connectors for In-Line Mounting of Fluorescent Lighting Fixtures. Fully Polarized Connectors
Connector System for Fluorescent Lighting Fixtures Connectors for In-Line Mounting of Fluorescent Lighting Fixtures Fully Polarized Connectors Luminaire Disconnect Connectors Pluggable Lighting Connectors
RMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment
RMI-RMP L100.05 us B RMI and RMP multi-couplings for fast tool change on injection molding and die cast equipment STÄUBLI CORPORTION P.O. BOX 189 - DUNCN - S.C. 29334 PHONE 864/433-1980 TOLL-FREE NUMBER
Series PC 3.5 precision subminiature connectors
Series PC 3.5 precision subminiature connectors Description Content HUBER+SUHNER PC 3.5 connectors are precision connectors for use in microwave applications up to 26.5 GHz. They are especially suitable
THERMASGARD TM 65. Immersion screw-in duct temperature measuring transducer, calibratable, with multi-range switching and active output TECHNICAL DATA
Patented quality product (Immersion sensor patent no. DE 10 2012 017 500.0) Calibratable temperature measuring transducer THERMASGARD with eight switchable measuring ranges, continuous linear output, enclosure
Directory chapter 05. D-Sub Filter subminiature D connectors, 2.54 mm pitch
F Directory chapter 05 D-Sub Filter subminiature D connectors, 2.54 mm pitch New Page General information.............................................. 05.02 Technical characteristics..........................................
revos revos Industrial Multipole Connectors
revos revos Industrial Multipole Connectors Catalog 2018 revos MINI Plant II, Rodezstraße in Bamberg Company headquarters in Bamberg STOCKO main plant in Wuppertal Solutions for Building technology AT
More than safety. Precision Multiple Limit Switches
More than safety. Precision Multiple Limit Switches Automation More than safety. Emil Euchner, the company s founder and inventor of the multiple limit switch, circa 1928. Around the world the Swabian
MODEL: 6DV-B. [2] TERMINAL BLOCK 0: None (Euro terminal block at the rear of indicator module)
![MODEL: 6DV-B. [2] TERMINAL BLOCK 0: None (Euro terminal block at the rear of indicator module)](/thumbs/80/81759350.jpg "MODEL: 6DV-B. [2] TERMINAL BLOCK 0: None (Euro terminal block at the rear of indicator module)")
Field-mounted Two-wire Signal Conditioners 6-UNIT -DIGIT LOOP POWERED INDICATOR (outdoor enclosure, intrinsically safe/explosion-proof) Functions & Features -digit LED display No external power source
MULTI ROTARY SWITCH MR50
MAIN FEATURES 1 / 2 " SELECTOR SWITCH Dimensions Ø ½ (12.7 mm) Switching mode: Shorting or non-shorting Selector switch positions up to 16 Switching torque up to 6 Ncm Gold plated contacts Rugged design
AX SERIES XLR CABLE CONNECTORS
AX SERIES XLR CABLE CONNECTORS The revolutionary AX series of XLR connectors introduce an exciting contemporary look and feel to the professional audio interconnect market. They are designed to complement
Lift Up Floor Locks Multi-Directional Castor. W Series. M Series (full stainless steel) WHEELS & CASTORS
Lift Up Floor s Multi-Directional Castor K Series M Series O Series M Series (full stainless steel) W Series WHEELS & CASTORS WWW.SITECRAFT.COM.AU WHEELS & CASTORS Lift Up Floor s Used on warehouse trolleys,
VALVES Inline 3/2-, 5/2- & 5/3 Spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT, G 1/2, 1/2 NPT
975 Inline 3/-, 5/- & 5/3 Spool valves electromagnetic actuated, indirectly controlled G /, / NPT, G /, / NPT For single and double operated actuators Closed crossover design Add-on manual override Rectified
fischer connectors 4032 Series HIGH-PERFORMANCE IN A VERSATILE PACKAGE MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION INSTRUMENTATION Edition 1.
fischer connectors 4032 Series Plastic connectors Edition 1.2 MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION HIGH-PERFORMANCE IN A VERSATILE PACKAGE INSTRUMENTATION PERFECT PACKAGE www.fischerconnectors.com
TWIN Series Clamps. DIN 3015, Part 3. Order codes p 26. Dimensions p 28. Mounting example p 31. Aluminium Twin Series Clamps p 32
TWIN eries Clamps IN 3015, Part 3 twin series clamps Order codes p 26 imensions p 28 Mounting example p 31 Aluminium Twin eries Clamps p 32 Order s PIPE CAMP MARIA (two clamp halves) ingle weld plate P
I Katalog SC OEN ESEN_OE Prospekt SC ayer US 1.06 8/23/12 4:43 PM Full compatibility with most popular plug systems Plug form 1:1 Nominal Bore SC Series Standards Compatible with* Information Page 6mm
2009 Ramtight Catalogue atalogue Ramtight C
Ramtight Catalogue Ramtight Catalogue 2009 Company Profile Ramelec Electrical Division commenced operations in 1991. We are 100% Australian owned with a nation-wide network of branch and regional offices
14CESeries. Miniature Pre-Leaded Vertical Enclosed Switches
Miniature Pre-Leaded Vertical Enclosed Switches 14CESeries Miniature enclosed switches with outstanding harsh environment resistance, ideal for compact machinery and equipment. Easy mounting by tightening
Key features: M8 Series BUCCANEER. Full Contact Diagrams Page 130
UCCNEER ulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory
Linear Luminaire with LED Series EXLUX 6002/1 Version IIB+H2
> For use in hazardous areas with gas group IIB+H 2 > Latest LED technology with a high luminous efficacy and a long service life > As pendant light fitting or pole mounted light fitting > Central locking
english Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group
english 26 Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group Customer requests and our constant involvement in ever changing markets is motivation
Timken Lubrication Delivery Systems. Friction management solutions SM to keep systems running smoothly
Timken Lubrication Delivery Systems Friction management solutions SM to keep systems running smoothly G-Power and M-Power Single-Point and C-Power Centralized Multi-Point Lubricators Proper lubrication
Sensor Connectivity Introduction Global Plus Connector Cables Multi-Connector Blocks. Product Selection Guide...
.0 Introduction Product Selection Guide.................................... Product Description....................................... Standards and Certifications................................ Product
Hose Menders. We offer hose menders in a variety of materials to suit the products being conveyed. G20N NYLON HOSE MENDER
We offer hose menders in a variety of materials to suit the products being conveyed. Hose Part Hose PRICE EACH Pkg Part Hose PRICE EACH Pkg G20S PLATED STEEL HOSE MENDER G20S-038 3 8" $ 2.30 $ 2.10 5 G20S-050
21023, 21025, 2/2 Direct solenoid actuated poppet valves
03, 05, / > > Port size: G/4, G/ > > Working from 0 bar up > > Suitable for mediumhigh vacuum down to.33 0 - mbar l/s > > Compact design > > Valves and solenoids are ATEX approved. Additional international
Ball and Socket Shafts Series 0.800
Ball and Socket Shafts Series 0.0 Ball and Socket Shafts Series 0.0.1 Size 0..9 Md max Nm double, with length compensation, Standard bore Spline profile Standard bore Spline profile Standard bore When
Pneumatic Control/Feedback
897 /Feedback Type 897 can be combined with... Compact design Integrated pilot valve with manual override Internal control air routing Automatic end position adjustment With ATEX II cat. G/D and cat. D/G
SPH / MA and MA2 components MCS / MA multi-connections. Technical data sheet
SPH / MA and MA2 components MCS / MA multi-connections Technical data sheet SPH / MA and MA2 components for MCS / MA automatic multi-connections Nominal bore 04, 06, 08, 12, 15, 20, 25, 37, 50 and 75 mm
Clamps with RUBBER BUSHING
Clamps with RUER USHING Order Codes p 34 Dimensions p 34 CLAMPS WITH RUER USHING Mounting example p 37 STANDARD SERIES CLAMPS WITH RUER USHING Order Codes PIPE CLAMPS AND RUER USHING MATERIAL (two clamp