TWIN Series Clamps. DIN 3015, Part 3. Order codes p 26. Dimensions p 28. Mounting example p 31. Aluminium Twin Series Clamps p 32
|
|
- Domenic Blair
- 5 years ago
- Views:
Transcription
1 TWIN eries Clamps IN 3015, Part 3 twin series clamps Order codes p 26 imensions p 28 Mounting example p 31 Aluminium Twin eries Clamps p 32
2 Order s PIPE CAMP MARIA (two clamp halves) ingle weld plate P CF Multiple weld plate PM CF PP: Polypropylene material Colour lue N: other colours on demand. PA: Polyamide material Colour lack. GM: Rubber Elastomer material Colour lack. AU: Polypropylene self-extinguishing material. Colour White. Internal surface clamp body Knurled. N ifferent diameters are available on demand. For imensions see pages For materials characteristics see pages 31, 80 and 82. TYPE 1-5 TYPE 1-5 TYPE 1-5 Components description # # - # #, # # - # # P CF# XP CF# # PM CF# XPM CF# # in mm O.. of Pipe/Tube/ose Nominal bore pipe in inch in inch Outside diameter in mm Material of clamp body ingle weld plate t360 and AII 316 of thread Multiple weld plate t360 and AII 316 of thread Number of clamps 6 6 # # 6,4 1/4 6,4 # # 8 5/16 8 # # 9,5 3/8 9,5 # # 10 1/8 10 # # P XP M6 PM XPM M # # 12,7 1/2 12,7 # # 12,7 1/2 12,7 # # 13,5 1/4 13,5 # # # # # # 16 5/8 16 # # P XP PM XPM 5 17,2 3/8 17,2 # # # # 19 3/4 19 # # # # 21,3 1/2 21,3 # # 22 7/8 22 # # # # P XP PM XPM # # # # 25,4 1 25,4 # # # # 26,9 3/4 26,9 # # # # P XP PM XPM # # /4 32 # # 33,7 1 33,7 # # # # /2 38 # # P XP PM XPM # # 42,4 1.1/4 42,4 # # 26
3 Order s Upper plate P CF exagon Flat washer RP exagon R igh hexagon ocking plate P CF Mounting rail Rail nut with rubber ring F+AG / F-C EN IO for use with upper plate P CF For use with hexagon R EN IO for use with flat washer RP For stacked clamps For stacked clamps F-C with rubber cap TYPE 1-5 F+AG P CF# XP CF# CF# X CF# # RP CF# X CF# # CF# X CF# # P CF # XP CF # X F/F-C - # XF/XF-C - # ingle weld plate t360 and AII 316 teel 8.8 and A4 of thread Falt washer t360 and A4 teel 8.8 and A4 of thread igh hexagon t360 and AII316 of thread ocking plate t360 and AII 316 Mounting rail teel X51 and AII 316 Rail nut teel C20 and AII316 of thread P XP M6x35 RP 6 XRP 6 for clamp X M6x30 X M6 P XP F/F-C XF/XF-C P XP x35 X x30 X X P XP x45 RP 8 XRP 8 X x40 X P XP Available heights 11, 14 and 30mm Available lenghts 2m F XF for clamps - for clamps - for clamps - P XP x50 X x45 X P XP x60 X x55 X 27
4 imensions MARIA AN TYPE OF TREA COMPONENT AN ACCEORIE All components and accessories are available in: Carbon steel t360 with finishing surface in white zinc-coated Fe Zn c8 II. Untreated area available on request. tainless steel inox 316: (X2 CrNiMo ) marked with X identification code. N The track is treated with zinc-plating ENZIMIR. All the components are produced with metric thread, on request are also available with UNC thread. : code M. UNC thread: code UNC. For material characteristics see pages 31, 80 and 82. Materials description O.. of Pipe/Tube/ose 1 / 2 in mm 6 nominal bore pipe in inch in inch 6,4 1/4 (two clamp halves) TYPE 1-5 Material PP-PA-GM code CF Width ingle weld plate P CF Carbon steel t360 code P CF tainless steel AII 316 code XP CF Multiple weld plate PM CF TYPE 1-5 TYPE Carbon steel t360 code PM CF tainless steel AII 316 code XPM CF /16 9,5 3/8 10 1/ ,6 30 P XP ,5 12 M6 PM XPM ,5 12 M ,7 1/2 12,7 1/2 13,5 1/ / ,8 30 P XP PM XPM ,2 3/ / ,3 1/2 22 7/ P XP PM XPM , ,9 3/ P XP PM XPM /4 33, / ,2 30 P XP PM XPM ,4 1.1/4 28
5 imensions Upper plate P CF Flat washer RP R igh hexagon EN IO for use with upper plate P CF EN IO 7089 for use with hexagon R EN IO for use with flat washer RP For stacked clamps 1 C TYPE 1-5 Carbon steel t360 code P tainless steel AII 316 code XP teel 8.8 code tainless st. A4 code X Carbon steel t360 code RP tainless steel A4 code XRP teel 8.8 code R tainless st. A4 c. XR t360 code tainless st. AII 316 code X x 1 x C P XP 34, X M6x35 RP XRP 22 6,5 2 R XR M6x30 X M P XP X x35 R XR x30 X P XP X x45 R XR x40 X RP -5 XRP ,5 2 P XP X x50 R XR x45 X P XP 102, X x60 R XR x55 X
6 imensions ocking plate P For overlapped clamps Mounting rail 1 2 Rail nut with rubber ring F+AG / F-C M6 1 F-C with rubber cap AG 2 M6 F+AG 1 Carbon steel t360 code P tainless steel AII 316 code XP teel X51 code tainless steel AII 316 code X teel C20 code F/F-C tainless steel AII 316 code XF/XF-C AG P XP ,2 0,5 F/F-C XF/XF-C 25,5 10,4 14,5 5,5 11,8 M6 X x2 P CF XP CF to clamps ,2 0,5 F CF XF CF to clamps - 25,5 10,4 13,5 5 13,8 30
7 Mounting Example Mounting Example of complete stacked clamp for pipe with outside diameter of 25mm, mounting rail nut. Mounting Example of complete stacked clamp for pipe with outside diameter of 25mm, with single weld plate and upper plate. N.1 x45 teel 8.8 Metric Thread N.1 P Upper plate in t360 N.1 x45 teel 8.8 Metric Thread N.1 P Upper plate in t360 N.1 P ocking plate in t360 N.1 P ocking plate in t360 N.1 tacking bolt in t360 N.1 tacking bolt in t360 N.1 F+AG rail nut in steel C20 2 Meters 28x30 Rail in steel X 51 N.1 P Weld plate in t360 Mounting Example of complete clamp for pipe with outside diameter of 25mm with single weld plate and upper plate. Mounting Example of complete clamp for pipe with outside diameter of 25mm with single weld plate and flat washer. N.1 x40 teel 8.8 Metric Thread N.1 RP Flat washer in t360 N.1 P Weld plate in t360 N.1 x45 teel 8.8 Metric Thread N.1 P Upper plate in t360 N.1 P Weld plate in t360 31
8 Mounting Example Mounting Example of complete stacked clamp in Polyamide for pipe with outside diameter of 25mm, mounting rail nut. NO # # : Material clamp body PP: Polypropylene N.1 x45 teel 8.8 Metric Thread N.1 P Upper plate in t360 PA: Polyamide A: Aluminium GM: Rubber AU: Polypropylene self-extinguishing in Polyamide N.1 F+AG Rail nut in steel C20 2 Meters 28x11 Rail in steel X 51 PIPE CAMP - AUMINIUM TWIN ERIE Order s and imensions PIPE CAMP MARIA (two clamp halves) A: Aluminium material Colour Natural. 1 1 EN IO Internal surface clamp body smooth For material characteristics, see page 80. A CF Component description Aluminium twin series clamp, for the fixing of hard and flexible hoses, from 12 to 20mm. Clamp s design allow them to be used in different applications, for example mobile hydraulic applications. teel 8.8 code tainless st. Aisi 316 code X Outside diameter pipe in mm Order example A CF da 12 to 20 A CF from 12 to 20 Mounting hexagon 8,5 13,5 from x35 to x45 32
TWIN SERIES CLAMPS. TWIN Series Clamps. Order codes p 26. Dimensions p 28. Mounting example p 31. Aluminium Twin Series Clamps p 32
TWIN eries Clamps TWIN ERIE CAMP Order codes p 26 imensions p 28 Mounting example p 31 Aluminium Twin eries Clamps p 32 PIPE CAMP - TWIN ERIE Order s PIPE CAMP MARIA PP: Polypropylene material Colour Blue
More informationClamps with RUBBER BUSHING
Clamps with RUBBER BUSHING Order Codes and dimensions Standard series DIN 3015, Part 1 p 34 Order Codes and dimensions Heavy series DIN 3015, Part 2 p 35-36 clamps with rubber bushing Mounting example
More informationClamp Body Type H. Smooth Inside Surface w/o Tension Clearance 6 106/06 QQQ 6,4 1/4 106,4/06,4 QQQ 8 5/16 108/08 QQQ 9,5 3/8 1/4 109,5/09,5 QQQ
Twin eries DIN 3015, Part 3 Components: Dimensions / Clamp ody Profiled Design Profiled Inside urface with Tension Clearance Clamp ody Type mooth Inside urface w/o Tension Clearance 1 2 ø D 1 ø D 2 Clamp
More informationClamps with RUBBER BUSHING
Clamps with RUER USHING Order Codes p 34 Dimensions p 34 CLAMPS WITH RUER USHING Mounting example p 37 STANDARD SERIES CLAMPS WITH RUER USHING Order Codes PIPE CLAMPS AND RUER USHING MATERIAL (two clamp
More informationComponents: Dimensions / Order Codes. *SP*1D*M*W2 * Single Weld Plate SP * STAUFF Group 1D * Thread code Metric ISO thread M. * Group Weld Plate
DIN 3015, Part 3 Components: Dimensions / Order Codes Clamp Body Clamp Body L1 L2 ød1 ød2 Clamp Body 1 PP One clamp body is consisting of two clamp halves. 1st Part of 1 Exact outside diameters Ø D1 /
More information10 L2.39. Pipe / Tube Copper (2 Clamp Halves) ( mm /in) Ø D1 Pipe Tube (mm) (in) (in) (in) ( = Material) L1 L2 H S min. Width
DIN 3015, Part 1 Components: Dimensions / Order Codes Clamp ody ød1 ød1 10.39 TAUFF 1 TAUFF 1A to 8 Clamp ody One clamp body is consisting of two clamp halves. Colour: Green Material code: PP Colour: lack
More informationClamp Body Type H. Smooth Inside Surface w/o Tension Clearance 6 106/06 QQQ 6,4 1/4 106,4/06,4 QQQ 8 5/16 108/08 QQQ 9,5 3/8 1/4 109,5/09,5 QQQ
Twin eries DIN 3015, Part 3 Components: Dimensions / Clamp Body Profiled Design Profiled Inside urface with Tension Clearance Clamp Body Type mooth Inside urface w/o Tension Clearance L 1 L 2 ø D 1 ø D
More informationSTAUFF Clamps have been successfully tested and approved by several international organisations, including:
A Clamps A Clamps In most industrial countries Clamps symbolise quick and easy pipe and hose installations as well as a clean distinct pipe layout. Clamps have been successfully tested and approved by
More information3S 1 13,5 1/4 3013, /8 1/ ,2 3/8 3017, / ,3 1/2 4021,3
DIN 3015, Part 2 Components: Dimensions / Order Codes Clamp Body ød1 S 1 Clamp Body One clamp body is consisting of two clamp halves. Colour: reen Material code: PP Colour: Black Material code: PA (87
More information060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
More informationProduct catalogue. Aztec International S.A., ul. Bułgarska 63/65, Poznań, Poland, phone ,
Product catalogue Delivery Programme 2014 Status 02/2014 - Subject to change - Index Rail system... 4 Accessories mounting rails... 11 Rail connectors... 11 Cross connectors... 12 Module clamps... 13 Module
More informationTemperature Measurement SITRANS TS300
Siemens AG 018 For food, pharmaceuticals and biotechnology modular design Dimensional drawings Cable gland M1x1.5 for cable Ø 3... 6.5 (0.1... 0.6) Ø 60 (.36) Ø d = N + H 1 Ø 50.5 (1.99) U X H 1 N H Ø
More informationCatalogue 2016 HOSE TECHNOLOGY. Fittings, Valves and Accessories. Schauenburg Hose Technology Group
Catalogue 2016 HOSE TECHNOLOGY Fittings, Valves and Accessories Schauenburg Hose Technology Group PREAMBLE The new fittings and accessories range of APD Petzetakis Schlauchtechnik GmbH Quality and reliability
More informationOil Solutions. Clamps. Local solutions for individual customers worldwide
Oil olutions Clamps Local solutions for individual customers worldwide www.oilsolutions.com.au sales@oilsolutions.com.au Distributor Walter tauffenberg mb & Co. K P.O.ox 1745 D-58777 Werdohl Im Ehrenfeld
More informationCable Entry Systems EMC Solutions. innovative creative technology. Product program. A company of the icotek group
Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group Customer requests and our constant involvement in ever changing markets is motivation for
More informationLeg Systems & Fittings
Leg Systems & Fittings Product range: entre Pin Glides orner Plates Folding Legs Glides Height djusters Metal Height djusters Plastic Leg Plates Plastinails Single Wheel astors Table Legs Twin Wheel astors
More informationIt can be used for fire observation, cable line patrol, construction monitoring, farm monitoring, andother applications requiring high mobility.
UserManual SPARTACUSH680 Rev i s i on1. 0( 15hMay2014) SPARTACUS H680 The Spartacus H680 features full CNC machined, high performance carbon fiber construction. The design has been optimised, and the frame
More informationCable Entry Systems EMC Solutions. innovative creative technology. Product program. A company of the icotek group
Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group Customer requests and our constant involvement in ever changing markets is motivation for
More information604 SOCKET HEAD BUTTON SCREWS
600 SOCKET HEAD CAP SCREWS Page........626 634 602 SOCKET SET SCREWS 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS Page........635 636 Page........637
More informationROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.
Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2) hex nuts. In addition,
More informationACCESSORIES. Accessories for distance and position sensors Magnets for HLT 1000, HLT 2000, HNT Electrical accessories HLT
Accessories ACCESSORIES Accessories to suit every sensor! Whether it's electrical connectors, mechanical adapters or the instrument mounting clamps, the wide range of products from HYDAC offers solutions
More informationANACONDA MULTIFLEX CONDUIT TYPE UI
ANACONDA MULTIFLEX CONDUIT TYPE UI Very robust, extremely flexible and corrosion resistant Multifl ex type UI is the stainless steel version of type UIG. Extremely fl exible and robust, this fully interlocked,
More informationWORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp
GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated
More informationenglish Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group
english 26 Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group Customer requests and our constant involvement in ever changing markets is motivation
More informationw w w. r i n o x. i n
NEW RANGE 2009 Premium Stainless steel Architectural systems & Components as e s a le P k fo r r ou C om p l e te R a ng e ca t a lo g w w w. r i n o x. i n STAINLESS ST TEEL RAILINGS I N D E X Glass Clip
More informationFits 1 3/4" Resilient Rings. Part # Shaft Height A" 92-A /4" 4.4" 92-A /4" 4.6" Fits 2 1/2" Resilient Rings. Part # Shaft Height A"
Bases 48 Frame Resilient Mount Kit 92-A240 9" Blowers( 2 1/2" Rings) 92-A241 12" Blowers ( 2 1/2" Rings) 92-A242 10" Blowers (2 1/2" Rings) Accessories Base Mounting Adapter Kit For 5 1/2" with flat end
More informationSAFETY EQUIPMENT EARTHING AND SHORT-CIRCUITING DEVICES angled, ball Ø20 or 25 mm EN/IEC (DIN VDE 0683 Part 100) and DIN Part 1
Points Installation Storage Phase and Earthing Points ball points, straight and angled, ball Ø20 or 25 mm EN/IEC 61230 (DIN VDE 0683 Part 100) and DIN 48088 Part 1 Suitable for fixing cable lugs or connecting
More informationROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.
ROUND BEND U-BOLTS Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2)
More informationIdeal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
More informationenglish Cable Entry Systems EMC Solutions innovative creative technology Product catalogue A company of the icotek group
english 27 Cable Entry Systems EMC Solutions innovative creative technology Product catalogue A company of the icotek group Ideas move Ideas move the world icotek GmbH is a privately held company in the
More informationSECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE
SECTION 8 - ULTRA & ULTRA-C PARTS CATALOGUE PART # DESCRIPTION PAGE MOUNTING KITS & TANKS 903U MOUNTING KIT WITH TANK 801-802 905U MOUNTING KIT WITHOUT TANK 803-804 902U MOUNTING KIT - CRADLE, BLOCKS &
More informationDoor stopper, wall mounting 4-7 Door stopper, floor mounting 8-9. Door stopper, wall mounting 10 Door stopper, floor mounting 11
oor stopper : 8 Content oor stopper Seite Satin stainless steel oor stopper, wall mounting 4-7 oor stopper, floor mounting 8-9 Stainless Steel,black oor stopper, wall mounting 0 oor stopper, floor mounting
More informationCode Type I.D. (mm) O.D. (mm) Operating Pressure (PSI) Min. Burst Pressure (PSI)
411 Series Braided Teflon Hose Order by Phone +44 (0) 121 525 5800 Type 411 Teflon Smooth Bore Hose The exceptional resistance of Teflon to high temperatures, permeability, chemical attack, water absorption
More informationCABLE ROUTING SYSTEMS. WIRE CABLE TRAYS - standard open trays PRODUCT INFORMATION
C L E S N I T T I O N CLE ROUTING SYSTEMS WIRE CLE TRYS - standard open trays PROUCT INFORMTION Table of Contents Open cable trays S25 - S26, S30M - S35W.... Pgs 4-5 Open cable trays S36 - S39W, S30- -
More informationSYSTEM 25 SYSTEM 50 AS SYSTEM 63 SYSTEM 75 SYSTEM 100. Alsident System 50. Antistatic (AS) Product Information
Alsident System 50 Antistatic (AS) Product Information . System 50 Antistatic General Information Product Specification Product description System 50 Antistatic Alsident System Airflow between 45-85 m
More informationKEL-DPZ 24 Cable entry plates
KEL-DPZ 24 IP65 KEL-DPZ on request also available with threaded bushings.* Membrane on front Description Type Order No. Number of PU cables KEL-DPZ entry plates are designed to route and seal standard
More informationProducts Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased durability easy and quick installation reasonable
More informationAll prices in CHF, excl. taxes, ex works Solothurn, payment within 30 days net
Price list 2018 Standard program Magnetic holding devices Dial test indicator holder Selecting magnet Demagnetizer Holding and sticking magnets Rubber magnets Conditions: Delivery terms: All prices in
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Use a thread pitch gauge to determine the number
More informationDisplay Products Catalogue. Rapid Delivery of Point of Sale Components
Display Products Catalogue Rapid Delivery of Point of Sale Components Product Showcase Contents Point of Sale Construction Nuts, Screws, Fasteners, Snaps, Clips, Rivets and Book Screws. Pages 2-9 Viking
More informationpneumatic push-in fittings system LF 3000
pneumatic push-in fittings system LF 3000 Parker Legris connectic products are available from MARYLAND METRIS P.O. Box 261 Owings Mills, MD 21117 USA ph: (410)358-3130 (800)638-1830 fx: (410)358-3142 (800)872-9329
More informationMDT 2000 Magnetostrictive linear position transducer
Description MDT 2000 is a magnetostrictive linear displacement transducer. The position value is obtained by measuring the flight time elapsed between an electrical pulse, sent in a special waveguide,
More information1 5 / 8" 7 /8" 2" 7 /8" 75. 3" 7 /8" 75 Polyurethane HI-TECH Delrin / /16 3/4
For use on wood furniture that can accept a 3 /8" diameter hole approximately 1 5 /8" deep. No.20 pressed steel adapter (Part #50011) with toothed base is supplied. size: 5 /16" diameter x 1 1 /2" long.
More informationD-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
More informationTDQ K1 - Rhino Cart Mobile Fixturing Station 1200 x 750 x 910mm (LxWxH) Includes 66 Piece Fixturing Kit
TDQ612075-K1 - Rhino Cart Mobile Fixturing Station 1200 x 750 x 910mm (LxWxH) Includes 66 Piece Fixturing Kit Ex GST Inc GST $3,290.00 $3,619.00 ORDER CODE: MODEL: Type: W07705 TDQ612075-K1 Rhino Cart
More informationTitan Media Cart. Installation and Operation Manual
Titan Media Cart Installation and Operation Manual Table of Contents INTRODUCTION SERVICE AND SUPPORT... 1 PRODUCT RETURNS... 1 UNPACKING... 1 TITAN SINGLE MEDIA CART... 2 TITAN DUAL MEDIA CART... 2 BEFORE
More informationWater Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply Maintenance Products Section WO 04 Last updated January 2007 CONTENTS SPECIFICATIONS A WO 04-S1A MULTI-PURPOSE UNRESTRAINED
More informationMIDSIZE VEHICLES OR PICKUP TOPPERS & CAPS M-1000, M-2000, M-3000 ALUMINUM
IAB INSTRUCTION MANUAL MIDSIZE VEHICLES OR PICKUP TOPPERS & CAPS M-1000, M-2000, M-3000 ALUMINUM Required Tools Drill with 5/16 Drill Bit MIDSIZE VEHIGLES M1105 50 [ ] M1100 60 [ ] M1150 72 [ ] M2105 50
More informationCable Entry Systems EMC Solutions. innovative creative technology. Product program. A company of the icotek group
Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group Customer requests and our constant involvement in ever changing markets is motivation for
More informationItem 620A Multi-Way Sanitary Ball Valve
R Item 0A Multi-Way Sanitary Ball Valve 00 WOG/ PN : /"-" SPECIFICATION * Body & end caps quality investment casting * Regulation (EC) No. / 00; (EU) 0/0 * Available in stainless steel or carbon steel
More information651 EXTRACTOR 670 SCREWED SOCKET HEAD SOCKET SET SCREWS CAP SCREWS. Page Page SOCKET HEAD COUNTERSUNK SCREWS SOCKET HEAD
600 SOCKET HEAD CAP SCREWS 602 SOCKET SET SCREWS Page...........596602 Page.......................603 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS 615
More informationCable Connector Housings for D-Subminiature connectors, Series TMC. Catalog E /04 Edition 1
Cable Connector Housings for D-Subminiature connectors, Series TMC www.erni.com Catalog E 023975 08/04 Edition 1 www.erni.com Catalog E 023975 08/04 Edition 1 Table Of Contents Housing versions KSG 200,
More informationThermowell for Screwing
Accessories - KC0126-2013/09 Thermowell for Screwing Nominal pressure PN160. Inner bore diameter 9 mm. WT70 C 01 Temperature cylindrical thermowell for screwing, PN160 V900 9 Z01 M20x1. 5 P02 M27x2 Code
More informationWELDBEND CARBON STEEL WELDING FITTINGS
070-1 CARBON STEEL WELDING FITTINGS STANDARD WALL NOMIN. 90 ELBOWS 45 RETURN TEES PIPE LONG SHORT ELBOWS BEND FULL SZ STUB SIZE RADIUS RADIUS LR LR OUTLET CAPS ENDS 1/2" 16.56 17.60 154.60 20.36 235.71
More informationAccessories. Slide lock DVxxGx Manually operated slide locks Dimensions in mm. Lock bolt DV-B1/x for above slide locks Dimensions in mm
Slide lock DVxxGx Manually operated slide locks Dimensions in mm Dimensions A B width DV09Gx 36,0 25,0 11,0 DV15Gx 44,0 33,3 11,0 DV25Gx 58,0 47,0 11,0 DV37Gx 74,3 63,5 11,0 DV50Gx 73,8 61,1 13,6 ending
More informationCable entry systems for potentially explosive atmospheres
Cable entry systems for potentially explosive atmospheres Directive 94/9/EC (ATEX) ATEX stands for ATmosphère Explosible and is the short name for the European Directive 94/9/EC, regulating the market
More informationStandard Product. Catalog Number. Width. Depth. mm 18 = = = = = = = = 400
Spec-01195 PROLINE G2 External Components Bases Gland Plate Gland plates are used with a plinth base to provide cable management solutions while maintaining a NEMA 12 rating. PROLINE G2 s unique Duro-Stand
More informationFeatures: Quality Testing and Documentation
1 The Yokogawa Falcon Series Dual Chamber Orifice Assembly YFOM-DC, is suitably designed for on-line retraction and inspection of orifice plates in process full flow and pressure conditions. The orifice
More informationSensor Wafer MUT 1000 EL DS120-1-ENG
Electromagnetic Flowmeter dg: www.oryana.com.ar NEW Sensor Wafer MUT 1 EL DS12-1-ENG 1 / 1 Sensor MUT 1 EL MUT 1 EL sensors represent the state of the art of EUROMAG INTERNATIONAL production for water
More informationKF to CFF Adapters. Samho Syscom Ent. / Varian, Inc. Vacuum Technologies. Outline Drawing
KF to CFF Adapters Ordering Information KF to CFF Adapters CFF Part CFF KF Flange Overall Length Tube ID Shipping Size Number OD NW Size OD A in. (mm) B in. (mm) Weight lbs. (kg) in. FA0NW6S. NW6.8.57
More informationMETRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL
METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL CHAINWHEELS Page 2 Ductile Iron wheels Sprocket-Type, for use with Single Loop Cut Used to operate overhead valves from
More informationHow to Identify Fluid Ports and Connectors. A guide to North American, British, Japanese, German (DIN metric), and ISO connections
How to Identify Fluid Ports and Connectors A guide to North American, British, Japanese, German (DIN metric), and ISO connections How to measure threads Measure the thread diameter with an / caliper. When
More informationBalustrade Components. Your FACO Expert Catalogue 2017/2018. certified in accordance with DIN EN 1090
Balustrade Components Your FACO Expert Catalogue 2017/2018 certified in accordance with DIN EN 1090 FROM PROFESSIONALS FOR PROFESSIONALS Whichever ideas and plans you may have in mind we will be happy
More informationAHC System. Specifications. Series MA210 MA310 Positioning Max. transportable mass
AHC System Series Automatic exchange of robot hand tools, FMS (flexible manufacturing system) implemented for assembly lines. The robot hand tools change automatically to accommodate workpieces of different
More informationCertified. 5 mm probe tip diameter with 1/4-28 threaded body. Probe tip and body sealed to prevent leaking through cable
DP1009 Series PRO FFv, 1/4-28 Case Thread, Eddy Current/ with Armor Jacketed Cable PRO DP1009 series proximity probes measure shaft vibration and 5 mm probe tip diameter with 1/4-28 Stainless steel probe
More informationPRODUCT CATALOGUE 2009
HYDROSCAND Reusable fittings Table of contents Product group 200 ferrule Reusable fittings are only suitable for steel braided hoses, type 1SN and 2SN. Ferrules for both skived and non-skived assemblies
More informationFIXPOINTS PICTORIAL INDEX
Cable Support Systems 149 FIXPOINTS PICTORIA INDEX FASTENERS AND CONNECTORS HN Hexagon Nuts [/] FW Flat Washers [/]. Dia. HN06 HN06H M6 0.15 100 HN08 HN08H M8 0.46 100 HN10 HN10H M10 0.75 100 HN12 HN12H
More informationThis is an economic model, especially suitable for instruments with ¼ port connection. Not detachable to repair.
Diaphragm seals - Stainless steel d. seals ¼ - PVC diaphragm seals ¼ - Stainless steel d. seals ½ - PVC diaphragm seals ½ - Easy-to-clean diaphragm seals - High pressure diaphragm seals - Low pressure
More informationKF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Bellows are even provided for forming joints with main pipelines or sometimes
More informationJIB EPT USER MANUAL. Please read this manual carefully before using the Alphatron JIB ETP unit! JIB & MOTORISED PAN AND TILT UNIT
JIB EPT JIB & MOTORISED PAN AND TILT UNIT USER MANUAL EN Please read this manual carefully before using the Alphatron JIB ETP unit! Thank you for purchasing a Alphatron product The EPT head is developed
More informationFixings for Mobile Radio Base Stations
Fixings for Mobile Radio Base Stations Clamps Cleats Accessories Fixings for Mobile Radio Base Stations The Telegärtner Group is now pleased to include cable clamps and cleats to extend its portfolio of
More informationClean packaging Class M3.5 Standard packaging Class M5.5. The U type is recommended when changing tubing sizes. Packaging
eries LQ Options Panel mounting nut LQ U Applicable fitting LQN P Applicable fitting LQ LQ Application For LQ For LQ insert bushing Clean packaging M. tandard packaging M. The U type is recommended when
More information10. EMC accessories. Chapter. EMC shield rails and accessories 10.3 EMC shield clamps and accessories 10.7 Earthing strips Cable clips 10.
10. EMC accessories Chapter EMC shield rails and accessories 10.3 EMC shield clamps and accessories 10.7 Earthing strips 10.11 Cable clips 10.13 More Informations about cabinet wiring with LÜTZE LSC AirSTREAM:
More informationOptions. Options. Hyponic. Options. Hyponic. Options 4.1
4 4.1 lug-in olid Output haft Frame ize 1100 ~ 1300 B IA M IA M U IA B IA A K E N C ZA M IA 4X H IA K A E M B IA U IA M IA B IA B IA U IA U IA B IA T Model A B min B max E H K N M M 1120//TY-X1 3.54 2.046
More informationSetting Standards. Cable Glands Cable Protection
Setting Standards Cable Glands Cable 2013 Setting Standards UMMEL 2 hummel.com your website! Online Catalog Product Pictures and Product Information Product and Assembly Videos Assembly and Operations
More informationBS EN Class H, BS 7430 UL467 (CR105) Tightening torque 15 Nm mm mm kg CR525
Rod to tape clamp (type A) Nominal rod Max. conductor 1 2 12.7 mm 26 x 12 mm 0.1 kg CR10 8 16 mm 26 x 12 mm 0.1 kg CR10 4 20 mm 26 x 10 mm 0.1 kg CR10 8 16 mm 0 x 2 mm 0.16 kg CR108 4 20 mm 0 x 2 mm 0.16
More informationRight angle through-hole plug and socket. Features circuits 25-circuits 9-circuits 25-circuits
D SUBMINIATURE CONNECTOR J SERIES Right angle through-hole plug and socket RIGT ANGE TROUG-OE PUG AND SOCKET 01 Right angle through-hole plug (with hexagonal lock ) Right angle through-hole socket (without
More informationT-Nuts St. Industrial Profile Systems Fasteners. Technical Data. Application. Ordering Information. Catalog /US T-Nuts
atalog 1816-3/US St Standard T-nuts conveniently roll into profile T-slots at any location. The spring/ball locking feature keeps the T-nut in place in vertical applications. Standard mounting elements
More informationDSLR Camera Cage Carbon Fiber Shoulder Rig Kit ( FC-02-CF )
FILMCITY DSLR Camera Cage Carbon Fiber Shoulder Rig Kit 1 DSLR Camera Cage Carbon Fiber Shoulder Rig Kit ( FC-02-CF ) I N S T R U C T I O N M A N U A L All rights reserved. No part of this document may
More informationLow-Intensity Infrared SAL
Low-intensity infrared SAL Page 1 6 Optical characteristics 10cd fixed or flashing 32cd fixed or flashing Colour aviation RED Horizontal beam 360 Vertical beam +6 +10 Low-Intensity 10 and 32cd with Stand-alone
More informationFlamco Mounting products
M O U N T I N G P R O U C T S 8 Flamco Mounting products K BALL AN HINGE JOINT VG ANGULAR PLATE KCL PROFILE CLAMP GP MOUNTING PLATE BMG ASSEMBLY STRIP Edition 2007 / UK Mounting products The best flexible
More informationØ 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5
Subminiature 7 series Screw termination M9 8 contacts Degree of protection IP7 Solder termination Moulded versions Diameter, mm Male angled connector 8,, Ø,, Contacts Cable outlet Ordering-No. 99 00 70
More informationØ mm. SYSTEM KAN-therm. Steel. Traditional material in modern technology TECHNOLOGY OF SUCCESS ISO 9001
Ø 12-108 mm SYSTEM KAN-therm Steel Traditional material in modern technology TECHNOLOGY OF SUCCESS System KAN-therm Steel - assortment press carbon steel pipe, zinc coated - bar 6 m 12 1,2 * 620459.4 6/624
More informationKF ADAPTORS AND BELLOWS
GENERAL INFORMATION Various adaptors and bellows are used for glass pipelines to form joints with other pipelines or with tubes. Especially for forming joints with fixed pipelines or in certain cases between
More informationMIRROR POLISHED POSTS See page 46
PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.
More informationOperating Instructions Drill rigs DRU400 DRA400
Operating Instructions Drill rigs DRU400 DRA400 Index 001 Original operating instructions 10988838 en / 12.05.2017 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
More informationwire guards PLAST D FUSERS FLUORESCENT LIGHTING FIXTURE PROTECTION Wire Guards / Fluorescent lighting fixture protection / Product Description:
Wire Guards FLUORESCENT LIGHTING FIXTURE PROTECTION Wire Guard units offer an inexpensive way to protect light fixtures from excessive abuse. Wire Guard units can be fabricated to fit most shapes of light
More informationLOCAL EXTRACTORS Pure advantages. The ideal extractor for industrial environments.
N new materials and a focus on design gives Movex PR many new and important advantages: - Unique ease of maneuverability. H - Hood designed for maximum capture PR's design is based on Movex's basic principles:
More informationCompression fittings Metric and inch
Fittings Compression fittings Metric and inch Ø 4 to 28 mm tube Ø 3 /16" to È" tube Wide range of types and sizes. Rugged and durable. Suitable for use under extreme conditions of temperature and pressure.
More informationTubeMount system. Section 11 (pp.53-59) Breadboards and bases. Section 12 (pp.60-62) Stages and rod system. Section 13 (pp.63-70)
OPTOMECHANICS - introduction 5 Optomechanics - introduction There are basically two ways of mounting an optical system enclosed or open. Enclosed systems,such as an ordinary microscope,are light- and dust-tight,rigid,
More informationWeatherproof enclosures for all corrosive environments
IP 66 MRIN INETS N ENLOSURES >>> Marina cabinets polyester - IP 66 - IK 10 www.klinkmann.com Weatherproof enclosures for all corrosive environments 362 56 362 76 Technical characteristics (p. 289) IP 66
More informationHERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0215
HERZ STRÖMAX 7GM/GML/GR HERZ STRÖMAX GM/GML/GR STRÖMAX-GM/GML Circuit Control Valve with test points STRÖMAX-GR Circuit Control Valve Data sheet STRÖMAX GM/GML/GR, Issue 0 H Rp L SW L L Dimensions in mm
More informationRedexim-Charterhouse Verti-Core 1300/ 1700/ 2100 pag 01 code 0202
Redexim-Charterhouse Verti-Core 1300/ 1700/ 2100 pag 01 code 0202 Part# 1300 Part# 1700 Part# 2100 DESCRIPTION REMARKS QUA 1 844.060.060 Same Same Winged nut - M6 10 2 830.060.060 Same Same Self lock nut
More informationKH SERIES. Features. JK series area by 20% compared with our JK series subminiature connectors. 6.18
D SUBMINIATURE CONNECTOR Right angle through-hole socket K SERIES RIGT ANGE TROUG-OE SOCKET 01 (with hexagonal lock screw blocks) (without lock screw blocks, but with grounding adapters having a inch thread)
More informationTechnical Informa on Codes Packing Informa on Thread Type
GLANS PLASTIC CABLE GLANS Technical etails Body PA 6 (Polyamide 6) Cap PA 6 (Polyamide 6) Seal CR (Chloroprene Rubber) Flammability V2 (According to UL 94) Protec on Class IP 68-5 Bar Opera ng Permanent
More informationICAO Low-intensity Type A (10cd) + Infrared 850nm ICAO Low-intensity Type B (32cd) + Infrared 850nm
DATASHEET ICAO Low-intensity Type A (10cd) + Infrared 850nm 05 Feb 2016 Low-Intensity 10cd and 32cd with Infrared 850nm Stand-alone LED Aviation Obstruction Lights Low-intensity red aviation warning light
More informationAcoustic baffle system
OWAconsult collection Unit Acoustic baffle system Unit mineral tiles Unit Constellation α w = 0.60 NRC = 0.6 Technical data mineral tiles Dimensions Material Heights: 0 mm, 00 mm lengths: 00 mm, 0 mm,
More information.23* (5.84) E/2 .34* (8.64) COVER BASE .160 (4.06).160 (4.06).160 (4.06).160 (4.06).160 (4.06) 1/ (3.43) .265 (6.73).327 (8.31).390 (9.
NG P O PONG V PN NO: U,, OP OW N O NG- N OU- : ase & over - lack Polycarbonate ardware - 0 tainless teel PON: upplied with ex ocket ap crew, lat Washers & lastic top Nut..00 (.0).00 (.0) G. (.). (.) PON:..00
More informationProducts Catalogue I. Mounting runners and components:
I. Mounting runners and components: 110111-R Mounting runner 40*40 mm M8 slot nut / M10 bolt length: 6.100 mm span width as per statics 110111-N 110112-R Mounting runner 40*40 mm with sideward screw channel
More informationRosemount 0085 Pipe Clamp Sensor
Product Data Sheet Rosemount Pipe Clamp Sensor Rosemount 0085 Pipe Clamp Sensor Non-intrusive design for fast and easy temperature measurement in piping applications Platinum RTD Temperature Sensors with
More information