CONDUIT SYSTEMS FOR ELECTRICAL WIRES AND CABLES: ANACONDA SPECIAL FITTING SOLUTIONS

Transcription

1 ONDUIT SYSTMS FOR LTRIAL WIRS AND ALS: FITTING SOLUTIONS

2 Fitting selection table Anaconda special fittings. Fitting Material Temperature ( ) Thread size range Shielding Approvals Protection Page Type Housing Min. Max. IS0 Pg NPT MP UL SA GOST lass Hummel adapter Nickel plated brass M25 x 1 M42 x 1 Pg IP Other makes Nickel plated brass M24x IP Proximity switch Nickel plated brass / polycarbonate M8 x 1 M12 x 1 M18 x IP Proximity switch Polyamide PA M8 x 1 M12 x 1 M18 x 1 M30 x 1, IP FITTING SLTION TAL 5-01

3 Anaconda Adapter for Hummel power connectors. This Anaconda nickel plated brass adapter has been designed specially for the Hummel power connector range. The 4 piece fi tting in combination with the conduit and power connector makes a perfect fi t. The design has been made in such a way that the clamping range of the power connector has been assured and that the connection on the conduit is IP 67 liquid-tight. esides a combination with Anaconda Sealtite, also combinations with the other conduit types of the Anamet range are possible. Material & onstruction: onstruction: Nickel plated brass fi tting, consisting of 4 parts (counter nut, clamping ring, ferrule and body). Material: ounternut, body and ferrule are nickel plated brass with exception of size 3/8 till 1 where the ferrule is from galvanised steel. lamping ring is made from PA6. Temperature: -45 till +105 º continuous. Protection class: Depending on the protection class of the conduit. onnection between the adapter and the power connector is IP 67 / IP 69 (Hummel specifi cation). olour: Metal. Power connector adapter for Anaconda Sealtite, IP 67 (for conduit details see chapters 3 & 6). Thread Sealtite Hummel lamping Dimensions in mm Standard Article Weight A Pg 11 5/16 M ,8 Pg 11 3/8 M ,8 M25 x 1 3/8 M ,6 M25 x 1 1/2 M ,6 M25 x 1 3/4 M ,3 M42 x 1 1 M , ,8 M42 x 1 1.1/4 M ,8 POWR ONNTOR ADAPTR A Power connector adapter for Multiflex type SL/SLI, IP 40 Thread SL/SLI Hummel lamping Dimensions in mm Standard Article Weight Pg 11 5/16 M ,8 Pg 11 3/8 M ,6 M25 x 1 3/8 M ,4 M25 x 1 1/2 M ,4 M25 x 1 3/4 M ,3 M42 x 1 1 M , ,8 M42 x 1 1.1/4 M ,6 5-02

4 A Power connector adapter for Multiflex type UIG/UI, IP 40 Thread UIG/UI Hummel lamping Dimensions in mm Standard Article Weight Pg 11 5/16 M ,2 Pg 11 3/8 M ,4 M25 x 1 3/8 M23 3-9, ,2 M25 x 1 1/2 M ,4 M25 x 1 3/4 M ,3 M42 x 1 1 M , ,4 M42 x 1 1.1/4 M ,6 Power connector adapter for Multitite type FD-F / -PU, IP 68 (for conduit details see chapter 2). Thread FD-F/PU Hummel lamping Dimensions in mm Standard Article Weight A Pg M * 4,8 Pg M ,8 M 25 x 1 16 M ,6 M 25 x 1 20 M ,6 M 25 x 1 25 M ,3 * The Pg 11 for FD 12 is IP 67 instead of IP 68. POWR ONNTOR ADAPTR Power connector adapter for Hiprojacket Aero, IP 54 / IP 67 (for conduit details see chapter 10). Thread Hiprojacket Hummel lamping Dimensions in mm Standard Article Weight Pg M ,8 M25 x 1 13 M ,6 A M25 x 1 16 M ,6 M25 x 1 22 M ,3 M42 x 1 25 M , ,8 M42 x 1 35 M ,8 Note: Additional clamp ring is necessary, see below. Standard protection class: IP 54, additional sealed with Hiprosiltape, IP 67 is possible. lamping ring, zinc plated brass, for combination with Hiprojacket Aero. Hiprojacket Aero Hummel Fitting thread size Standard Article Weight Size (mm) Type Range ISO Pg NPT Package Number (Kg/100) 13 HJ-08 M16 - Pg ,6 13 HJ-08 M23 M25 x ,6 16 HJ-10 M23 M25 x ,6 22 HJ-14 M23 M25 x ,0 25 HJ-16 M40 M42 x ,2 35 HJ-22 M40 M42 x ,8 5-03

5 Anaconda adapter for various makes power connectors. This Anaconda nickel plated brass adapter has been designed specially for other makes than Hummel power connectors. The 4 piece fi tting in combination with the conduit and power connector makes a perfect fi t. The design has been made in such a way that the clamping range of the power connector has been assured and that the connection on the conduit is IP 67 liquid-tight. esides a combination with Anaconda Sealtite, also combinations with the other conduit types of the Anamet range are possible. Material & onstruction: onstruction: Nickel plated brass fi tting, consisting of 4 parts (counter nut, clamping ring, ferrule and body). Material: ounter nut, body and ferrule are nickel plated brass with exception of size 3/8 till 1 where the ferrule is from galvanised steel. lamping ring is made from PA6. Temperature: -45 till +105 º continuous. Protection class: Depending on the protection class of the conduit. onnection between the adapter and the power connector is IP 67 / IP 69 (depending on makers specifi cation). olour: Metal. Power connector adapter for Anaconda Sealtite, IP 67 (for conduit details see chapters 3 & 6). Thread Sealtite Makers lamping Dimensions in mm Standard Article Weight M24 x 1 3/ ,6 M24 x 1 1/ ,0 Power connector adapter for Multiflex type SL/SLI, IP 40 POWR ONNTOR ADAPTR Thread SL/SLI Makers lamping Dimensions in mm Standard Article Weight M24 x 1 3/ ,4 M24 x 1 1/ ,4 Power connector adapter for Multiflex type UIG/UI, IP 40 Thread UIG/UI Makers lamping Dimensions in mm Standard Article Weight M24 x 1 3/ , ,2 M24 x 1 1/ ,4 Power connector adapter for Multitite type FD-F / -PU, IP 68 (for conduit details see chapter 2). Thread FD-F/PU Makers lamping Dimensions in mm Standard Article Weight M24 x ,6 M24 x ,0 5-04

6 Anaconda adapter for Pepperl + Fuchs proximity switches. These proximity switch adapters are specially developed for the new generation type of adapters (extra connection at the switch). The adapter is made from poly-carbonate so the light diodes are visible, while the switch is functioning. The construction is impact- and scratch-resistant. Due to the universal construction they are easy to connect in combina tion with almost all Anamet conduits. Also connection with the direct cable-switch connectors (old type proximity switches) is possible. Material & onstruction: onstruction: Nickel plated brass fi tting, consisting of 5 parts (counter nut, clamping ring, ferrule, body and holder). Material: ounter nut, body and ferrule are nickel plated brass with exception of size 3/8 till 1 where the ferrule is from galvanised steel. lamping ring is made from PA6. The holder is made from poly-carbonate and impact and scratch resistant. Temperature: -45 till +105 º continuous. Protection class: Depending on the protection class of the conduit. onnection between the adapter and the power connector is IP 65. olour: Metal, with transparent holder. Proximity switch adapter for Anaconda Sealtite, IP 65 (for conduit details see chapters 3 & 6). PROXIMITY SWITH ADAPT- R Thread Sealtite Makers Min. Internal Dimensions in mm Standard Article Weight Inside Size Range ore (mm) A Package Number (Kg/100) M8 x 1 1/4-5, ,0 M8 x 1 5/16-8, ,4 M12 x 1 1/4-5, ,0 M12 x 1 5/16-8, ,4 M18 x 1 1/4-5, ,0 M18 x 1 5/16-8, ,4 Proximity switch adapter for Multiflex type SL/SLI, IP 40 Thread SL/SLI Makers Min. Internal Dimensions in mm Standard Article Weight Inside Size Range ore (mm) A Package Number (Kg/100) M8 x 1 1/4-5, ,4 M8 x 1 5/16-8, ,0 M12 x 1 1/4-5, ,4 M12 x 1 5/16-8, ,0 M18 x 1 1/4-5, ,4 M18 x 1 5/16-8, ,0 5-05

7 Proximity switch adapter for Multiflex type UI-AP, IP 40 Thread UI-AP Makers Min. Internal Dimensions in mm Standard Article Weight Inside Size Range ore (mm) A Package Number (Kg/100) M8 x 1 6,0-5, ,4 M8 x 1 9,5-8, ,0 M12 x 1 6,0-5, ,4 M12 x 1 9,5-8, ,0 M18 x 1 6,0-5, ,4 M18 x 1 9,5-8, ,0 Proximity switch adapter for Multitite type FD-F /-PU, IP 65 (for conduit details see chapter 2). Thread FD-F/PU Makers Min. Internal Dimensions in mm Standard Article Weight Inside Size Range ore (mm) A Package Number (Kg/100) M8 x , ,0 M12 x , ,0 M18 x , ,0 PROXIMITY SWITH ADAPT- R 5-06

8 Adapter for various makes old version proximity switches. PROXIMITY SWITH ADAPT- R These proximity switch adapters are used in combination with the old type of adapters (fi xed wiring connection). Due to the construction they are easy to connect in combination with Sealtite conduit. Other combinations are not possible. Material & onstruction: onstruction: Polyamide fitting, consisting of 4 parts (counter nut, clamping ring, ferrule, and body). Material: ounter nut, body and clamping ring are PA6. Ferrule is made of brass. Temperature: -45 till +105 º continuous. Protection class: IP 65 (dust-proof, water-protected). olour: White. Proximity switch adapter for Anaconda Sealtite, IP 65 (for conduit details see chapters 3 and 6). Thread Sealtite Makers Min. Internal Dimensions in mm Standard Article Weight Inside Size Range ore (mm) A Package Number (Kg/100) M8 x 1 1/4-5, ,8 M12 x 1 5/16-8, ,2 M18 x 1 5/16-8, ,4 M30 x 1,5 5/16-8, ,8 ID 20 mm 5/16-8, ,0 ID 34 mm 5/16-8, ,0 5-07