SUN GLOW PRODUCTS Roller Shade Compatibility

Size: px

Start display at page:

Download "SUN GLOW PRODUCTS Roller Shade Compatibility"

Alice Owen
5 years ago
Views:

1 SUN GLOW PRODUTS Roller Shade ompatibility ased on the system control type the chart outlines configurations that are manufactured as a standard. ontrol Options hain Operated hainless Rollease Ultra NEO Vision LM R-Series Skyline Series Spring ssist Ultra Lite Ultra lutch 1" Neo 1.5" Neo None (Open Roll) D8 V a l a n c e & E n c l o s u r e O p t i o n s D12 D16 SF3 SF4 X V84 V102 Fabric PV Hanger & losure 2017 Retail Price Guide - 13/02/2018 page 11

ROLLER SHDES - OPERTING SYSTEMS Vision Roller Shade Systems vision Roller Shade Systems LIGHT GP Idle End Drive End 11/16"±1/8" 11/16"±1/8" FETURES ND ENEFITS Snap-on brackets for quick and easy

Minimal and symmetrical light gap offers greater solar control and a balanced appearance.

2 ROLLER SHDES - OPERTING SYSTEMS Vision Roller Shade Systems vision Roller Shade Systems LIGHT GP Idle End Drive End 11/16"±1/8" 11/16"±1/8" FETURES ND ENEFITS Snap-on brackets for quick and easy installation. Modular design offers a wide variety of valance configurations for optimal performance and cost effectiveness. Minimal and symmetrical light gap offers greater solar control and a balanced appearance. Lift assist mechanism (LM) spring mechanism reduces the pull force required to lift the shade which reduces wear and tear on the components. uilt in leveling system allows drive and idle end to be leveled after installation to compensate for uneven mounting conditions. Stripless clutch technology allows shade to also be pulled down by bottom bar. Vision meets the following Leed point criteria: MR credit: 4.1/4.2 Recycled content. MR credit: 5.1/5.2 Regional materials. EQ credit: 8.1/8.2 Daylight and views. ompletely assembled unit is balanced and tested during manufacturing to ensure proper performance before and after installation. LIGHT GP MY INRESE WHEN: 1. USING FRIS WHIH TEND TO TELESOPE. 2. THE WIDTH TO HEIGHT RTIO IS 1:2.5 OR GRETER Retail Price Guide - 13/02/2018 page 12

3 ROLLER SHDES - OPERTING SYSTEMS Vision - V-84 & V-102 MOUNTING OVERVIEW Shade Width < 48" 49" - 72" 73" - 108" 109" - 144" 145" - 180" # of Mounting rackets EILING & WLL MOUNTING RKET 1 WLL LTERL MOUNTING RKET SSETTE DIMENSIONS V-84 V /4" 4 1/8" TYP. MOUNTING SREW 3 5/16" 4" ISOMETRI VIEW MOUNTING SPEIFITIONS eiling Mount Wall Mount Lateral Mount Light Gap Light Gap LIGHT GP MY INRESE Y 1/4" WHEN SHDE IS MOUNTED LTERLLY. V /2" 3 5/16" 3 1/4" 1 1/2" 3 5/16" 3 1/4" 1 3/8" 3 5/8" V /8" 4" 4 1/8" 1 1/2" 4" 4 1/8" 1 3/8" 4 5/16" Measurement from wall to furthest screw Measurement from ceiling to bottom of cassette Measurement from wall to front of cassette 2017 Retail Price Guide - 13/02/2018 page 13

ROLLER SHDES - OPERTING SYSTEMS Vision - assette onfigurations TWO SSEMLY RKETS STNDRD TOP OVER OPTION REGULR ROLL OPTIONS Front Fascia Front & Return

4 ROLLER SHDES - OPERTING SYSTEMS Vision - assette onfigurations TWO SSEMLY RKETS STNDRD TOP OVER OPTION REGULR ROLL OPTIONS Front Fascia Front & Return Fascia Front, Return & ack Fascia REVERSE ROLL OPTIONS Front Fascia Front & Return Fascia Front, Return & ack Fascia 2017 Retail Price Guide - 13/02/2018 page 14

ROLLER SHDES - OPERTING SYSTEMS Vision - lutch & Spring onfigurations V1 LUTH STNDRD MIN.

dismantling the shade. Simultaneous chain option on both sides. lutch guide wheel prevents frayed fabric edges.

Self lubricating delrin material reduces friction and extends the life of all moveable components.

ounter balance system allows the shade to be pulled down by the ottom bar without damaging the clutch. VISION - LIFT SSIST MEHNISMS (LM) MIN.

5 ROLLER SHDES - OPERTING SYSTEMS Vision - lutch & Spring onfigurations V1 LUTH STNDRD MIN. WIDTH 6 Standard dual clutch for manual chain operated shades (drive and idle end) allows the drive side to be switched on site without dismantling the shade. Simultaneous chain option on both sides. lutch guide wheel prevents frayed fabric edges. lutch and spring combination provides a smooth and effortless operation, relieves stress on the chain and sprocket eliminating chain breakage. Self lubricating delrin material reduces friction and extends the life of all moveable components. Hardened coil spring optimizes tensile strength and torque power to maintain product quality over time. ounter balance system allows the shade to be pulled down by the ottom bar without damaging the clutch. VISION - LIFT SSIST MEHNISMS (LM) MIN. WIDTH 27 Lift assist mechanism reduces required pull force for finger tip control even on large shades. Vision built in lift assist mechanisms V15 to V120 customized for each shade by SG based on the blind size, thickness & weight of fabric to ensure the shade can be operated smoothly and effortlessly Retail Price Guide - 13/02/2018 page 15

ROLLER SHDES - OPERTING SYSTEMS hain Operation Rollease - R-Series Rollease - Skyline Ultra Series - Ultra lutch LIGHT GP MY INRESE WHEN: 1. USING FRIS WHIH TEND TO TELESOPE. 2.

6 ROLLER SHDES - OPERTING SYSTEMS hain Operation Rollease - R-Series Rollease - Skyline Ultra Series - Ultra lutch LIGHT GP MY INRESE WHEN: 1. USING FRIS WHIH TEND TO TELESOPE. 2. THE WIDTH TO HEIGHT RTIO IS 1:2.5 OR GRETER. LIGHT GP Idle End Drive End 1/2"±1/8" 5/8"±1/8" ll Open Roll Systems: The system never requires adjustment. FETURES ND ENEFITS ompatible with Lift ssist mechanisms (LM). Raise or lower the shade by simply pulling the chain. hain is available in white, grey, black, linen, brown, clear, and stainless steel. hain hold-downs included as a standard with each shade. Systems can be wall, ceiling, or laterally mounted. R-Series Skyline Ultra MIN. WIDTH 6 MIN. WIDTH 8 MIN. WIDTH 24 Standard Option Standard Option Standard Option lutch & End Plug Linen White/lack White lack White N/ rackets Nickel Plated White/lack Nickel Plated White/lack White N/ Intermediate rackets Dual Shade rackets Spring loaded end plug designed for easy installation. Simple and fast installation with universal brackets. Intermediate bracket available for multi-banding applications. Spring loaded locking end plug designed for easy installation. racket covers are standard Retail Price Guide - 13/02/2018 page 16

7 ROLLER SHDES - OPERTING SYSTEMS Open Roll ROLLESE - R-SERIES - LUTH & RKET DIMENSIONS TYP. 3/16 E F eiling Mount View Wall Mount View D G H lutch Model racket Model D E F G H R8 (8 LS) /2" 2 7/8" 2 1/2" 11/16" 1 15/16" 2 3/8" 380 2" 3 3/8" 3" 1 3/16 R16 (16 LS) /16" 3 1/2" 3" 9/16" 2 11/16" 3 1/4" /16" 4" 3 1/2" 1 1/16" R24 (24 LS) /16" 2 3/16" 4 5/8" 4 15/16" 3 15/16" 1 1/16" 1 1/16" 1 1/2 1 15/16" 2 1/2" ROLLESE - R-SERIES - MOUNTING SPEIFITIONS eiling Mount Wall Mount Lateral Mount MIN. 1/4 clearance required Light Gap MIN. 1/4 clearance required LIGHT GP IS NOT FFETED WHEN SHDE IS MOUNTED LTERLLY. lutch Model racket Model R8 (8 LS) /8" 1 7/8" R16 (16 LS) /16" 2 11/16" 1/16" R24 (24 LS) /16" 3 1/16" Measurement from wall to furthest screw Measurement from ceiling to furthest screw Measurement from ceiling to furthest screw 2017 Retail Price Guide - 13/02/2018 page 17

8 ROLLER SHDES - OPERTING SYSTEMS Open Roll ROLLESE - SKYLINE - LUTH & RKET DIMENSIONS TYP. 3/16 D E eiling Mount View Wall Mount View F G H lutch Model racket Model D E F G H /16" 2 9/16" 1 9/16" 3/8" SL10 (10 LS) /16" 3 1/2" 2 5/16" 3 1/8 " 2 3/16" /4" 3 7/8" 2 7/8" 7/16" /16" 2 3/4" 1 9/16" 3/8" SL15 (15 LS) /16" 3 5/8" 2 5/8" 2 5/16" 2 3/16" /8" 4 1/16" 2 7/8" 1 1/4" 2 3/16" 7/16" /16" 2 15/16" 1 9/16" 3/8" SL20 (20 LS) SL30 (30 LS) ROLLESE - SKYLINE - MOUNTING SPEIFITIONS eiling Mount Wall Mount Lateral Mount /16" 3 7/8" 3 1/16" 3 1/2" 2 3/16" /8" 4 1/4" 2 7/8" /8" 4" 2 3/16" 3 5/8" 4 5/16" /8" 4 11/16" 2 7/8" MIN. 1/4 clearance required 7/16" 7/16" MIN. 1/4 clearance required Light Gap LIGHT GP IS NOT FFETED WHEN SHDE IS MOUNTED LTERLLY. lutch Model racket Model 660 3/8" SL10 (10 LS) /4" 2 1/4" 7/16" 660 3/8" SL15 (15 LS) /8" 2 3/8" 7/16" 660 3/8" SL20 (20 LS) /16" 2 5/16" 7/16" SL30 (30 LS) /16" 2 13/16" 7/16" Measurement from wall to furthest screw Measurement from ceiling to furthest screw Measurement from ceiling to furthest screw 2017 Retail Price Guide - 13/02/2018 page 18

9 ROLLER SHDES - OPERTING SYSTEMS Open Roll ULTR SERIES - ULTR LUTH - LUTH & RKET DIMENSIONS TYP. 3/16 D eiling Mount View Wall Mount View E F lutch Model racket Model D E F Ultra lutch 40 mm 3 7/16" 2 15/16" 1 5/8" 1 7/8" 2 5/8" 3 3/16" 55 mm 4" 3 1/2" 2 3/16" 2 1/2" ULTR SERIES - ULTR LUTH - MOUNTING SPEIFITIONS eiling Mount Wall Mount MIN. 1/4 clearance required MIN. 1/4 clearance required lutch Model racket Model Ultra lutch 40 mm 2 5/16" 2 1/4" 55 mm 2 1/2" 2 1/2" Measurement from wall to furthest screw Measurement from ceiling to furthest screw 2017 Retail Price Guide - 13/02/2018 page 19

ROLLER SHDES - OPERTING SYSTEMS Lift ssist Mechanisms (LM) ROLLESE - SPRING SSIST FETURES ND ENEFITS Smooth and effortless operation of heavy shades.

10 ROLLER SHDES - OPERTING SYSTEMS Lift ssist Mechanisms (LM) ROLLESE - SPRING SSIST FETURES ND ENEFITS Smooth and effortless operation of heavy shades. Reduces the pull force on heavier shades to approximately 6 lbs even on shades weighing up to 22 lbs. Sun Glow uses 2" tubes and upgraded R24 clutch with Spring ssist. vailable with R-Series using 2" or 2 1/2" tube only. Value-priced alternative to automation. Recommended on shades from 96" up to 132" in width. annot be used on shades smaller than 50" in width. WHEN LM IS INDITED ON THE ORDER FORM, SUN GLOW WILL SELET THE PPROPRITE OPTION (ULTR LITE OR SPRING SSIST) SED ON THE SHDE SIZE, WEIGHT ND OTHER OPTIONS Retail Price Guide - 13/02/2018 page 20

11 ROLLER SHDES - OPERTING SYSTEMS Lift ssist Mechanisms (LM) ULTR SERIES - ULTR LITE MIN. WIDTH 26 FETURES ND ENEFITS Smooth and effortless operation of most shades. Reduced pull force required to operate shades. Recommended on shades up to 96" in width. Value-priced alternative to automation. Reduces stress on pre-existing shade components. Ultra Lite increases the longevity of the entire unit. an be used with all valance options except D8, D12, and X. ompatible with 1 1/2" T-tube. Recommended on shades from 26" up to 96" in width. WHEN LM IS INDITED ON THE ORDER FORM, SUN GLOW WILL SELET THE PPROPRITE OPTION (ULTR LITE OR SPRING SSIST) SED ON THE SHDE SIZE, WEIGHT ND OTHER OPTIONS Retail Price Guide - 13/02/2018 page 21

ROLLER SHDES - OPERTING SYSTEMS NeoShade hainless System Neo 1" for shades from 22" to 30" wide. Includes thermoplastic mounting brackets. Does not include upper limit stopper. Neo 1.5" for shades over 30" wide.

an easily be operated by pulling the shade from the center of the bottom bar or blind pull to the desired height. an easily be retracted by a slight pull of the bottom bar or blind pull.

12 ROLLER SHDES - OPERTING SYSTEMS NeoShade hainless System Neo 1" for shades from 22" to 30" wide. Includes thermoplastic mounting brackets. Does not include upper limit stopper. Neo 1.5" for shades over 30" wide. Includes white mounting bracket covers. MIN. WIDTH 22 MIN. WIDTH 30 FETURES ND ENEFITS Does not require a chain. an easily be operated by pulling the shade from the center of the bottom bar or blind pull to the desired height. an easily be retracted by a slight pull of the bottom bar or blind pull. Fits jamb depths of 2.5" for inside flush mount. Shipped as a completely tested unit, with no assembly required. Mounting brackets and shade holder make for a simple installation. Smart lock and snap release allow for easy dismounting when required. Neo 1" optional valance choices include Fabric valance, Decora 8, 12 and 16 cassettes. Neo 1.5" optional valance choices include Vision, Decora 12, and Decora 16 cassettes. LIGHT GP MY INRESE WHEN: 1. USING FRIS WHIH TEND TO TELESOPE. 2. THE WIDTH TO HEIGHT RTIO IS 1:2.5 OR GRETER 3. LTERLLY MOUNTING NEOSHDE. LIGHT GPS WILL INRESE Y T LEST 0.25" ON EH SIDE Retail Price Guide - 13/02/2018 page 22

VLNE & ENLOSURE OPTIONS 3" Fascia (SF3) & 4" Fascia (SF4) LIGHT GP Idle End Drive End 1/2"±1/8" 5/8"±1/8" FETURES ND ENEFITS ommercial grade aluminum construction.

13 VLNE & ENLOSURE OPTIONS 3" Fascia (SF3) & 4" Fascia (SF4) LIGHT GP Idle End Drive End 1/2"±1/8" 5/8"±1/8" FETURES ND ENEFITS ommercial grade aluminum construction. onceals roller and components for a very clean and contemporary appearance. Side covers are available in white, black, linen, dark bronze, and grey for outside mount applications. ompatible with chain operated and automated systems. Simple and fast installation with universal brackets. vailable in white, black, linen, dark bronze, light bronze and anodized. LIGHT GP MY INRESE WHEN: 1. USING FRIS WHIH TEND TO TELESOPE. 2. THE WIDTH TO HEIGHT RTIO IS 1:2.5 OR GRETER Retail Price Guide - 13/02/2018 page 23

14 VLNE & ENLOSURE OPTIONS 3" Fascia (SF3) & 4" Fascia (SF4) MOUNTING OVERVIEW UNIVERSL MOUNTING RKET FSI DIMENSIONS TYP. MOUNTING SREW SF3 SF4 3 1/16" 4 1/16" 3 1/16" 4 1/16" ISOMETRI VIEW MOUNTING SPEIFITIONS eiling Mount Wall Mount Lateral Mount Light Gap LIGHT GP IS NOT FFETED WHEN SHDE IS MOUNTED LTERLLY. SF3 2 3/8" 3 1/16" 3 1/16" 2 5/8" 3 1/16" 3 1/16" 2 5/8" SF4 3 1/2" 4 1/16" 4 1/16" 3 5/8" 4 1/16" 4 1/16" 3 5/8" Measurement from wall or eiling to furthest screw Measurement from ceiling to bottom of cassette Measurement from wall to front of cassette 2017 Retail Price Guide - 13/02/2018 page 24

15 VLNE & ENLOSURE OPTIONS X assette LIGHT GP Idle End Drive End 5/8"±1/8" 5/8"±1/8" FETURES ND ENEFITS ontemporary design, one piece aluminum construction. ompatible with Rollease - R-Series Operating Systems. Suitable for many commercial applications. ompletely encases roller shade mechanism and components. ompatible with manual and automated operating systems. Fully assembled design makes for simple and fast installation with ceiling, wall or lateral brackets. vailable in anodized. Other colours available by special request. LIGHT GP MY INRESE WHEN: 1. USING FRIS WHIH TEND TO TELESOPE. 2. THE WIDTH TO HEIGHT RTIO IS 1:2.5 OR GRETER Retail Price Guide - 13/02/2018 page 25

16 VLNE & ENLOSURE OPTIONS X assette MOUNTING OVERVIEW Shade Width < 48" 49" - 72" 73" - 108" 109" - 144" 145" - 180" # of Mounting rackets EILING & WLL MOUNTING RKET 1 WLL LTERL MOUNTING RKET (2 REQUIRED PER SHDE) RKET DIMENSIONS X 3 1/4 3 1/4 TYP. MOUNTING SREW ISOMETRI VIEW MOUNTING SPEIFITIONS eiling Mount Wall Mount Lateral Mount MIN. 1/8 GP Light Gap LIGHT GP MY INRESE Y 1/4" WHEN SHDE IS MOUNTED LTERLLY. X 1 13/16" 3 1/4" 3 3/8" 1 3/8" 3 7/16" 3 1/2" 1 3/8" 3 7/16" Measurement from wall to furthest screw Measurement from ceiling to bottom of cassette Measurement from wall to front of cassette 2017 Retail Price Guide - 13/02/2018 page 26

VLNE & ENLOSURE OPTIONS Decora 8 (D8), 12 (D12) & 16 (D16) LIGHT GP Idle End Drive End R-Series - D8, D12, D16 1/2"±1/8" 5/8"±1/8" FETURES ND ENEFITS Three headrail sizes accommodate greater range of

17 VLNE & ENLOSURE OPTIONS Decora 8 (D8), 12 (D12) & 16 (D16) LIGHT GP Idle End Drive End R-Series - D8, D12, D16 1/2"±1/8" 5/8"±1/8" FETURES ND ENEFITS Three headrail sizes accommodate greater range of drop length possibilities and use of thicker fabrics. Fully assembled design makes for quick and easy installation. Sleek look accommodates upscale commercial needs and affords greater residential appeal. ccommodates fabric insert. No visible brackets. vailable in white, black, linen, dark bronze, and anodized with matching end caps. Intermediate racket allows two shades in one headrail. LIGHT GP MY INRESE WHEN: 1. USING FRIS WHIH TEND TO TELESOPE. 2. THE WIDTH TO HEIGHT RTIO IS 1:2.5 OR GRETER Retail Price Guide - 13/02/2018 page 27

18 VLNE & ENLOSURE OPTIONS Decora 8 (D8), 12 (D12) & 16 (D16) MOUNTING OVERVIEW Shade Width < 48" 49" - 72" 73" - 108" 109" - 144" 145" - 180" # of Mounting rackets EILING & WLL MOUNTING RKET 1 SSETTE DIMENSIONS D8 D12 D16 3" 3 3/4" 4 7/16" TYP. MOUNTING SREW LTERL MOUNTING RKET (2 REQUIRED PER SHDE) 2 1/2" 3 1/8" 3 7/8" ISOMETRI VIEW MOUNTING SPEIFITIONS eiling Mount Wall Mount Lateral Mount MIN. 1/4 GP MIN. 1/4 GP Light Gap LIGHT GP MY INRESE Y 1/4" WHEN SHDE IS MOUNTED LTERLLY. D8 1 1/4" 2 1/2" 3 1/4" 3/4" 2 3/4" 3" 1 5/8" 2 3/16" D12 1 1/4" 3 1/8" 4" 3/4" 3 3/8" 3 3/4" 1 5/8" 3 1/2" D16 1 3/8" 3 7/8" 4 11/16" 1 1/8" 4 1/8" 4 7/16" 1 5/8" 4 1/4" Measurement from wall to furthest screw Measurement from ceiling to bottom of cassette Measurement from wall to front of cassette 2017 Retail Price Guide - 13/02/2018 page 28

VLNE & ENLOSURE OPTIONS Fabric Valance 6 FETURES ND ENEFITS an be used with Roller Shades and Panel Track. Standard is 6" (height) but custom sizes can be accommodated.

19 VLNE & ENLOSURE OPTIONS Fabric Valance 6 FETURES ND ENEFITS an be used with Roller Shades and Panel Track. Standard is 6" (height) but custom sizes can be accommodated. vailable with or without returns. Standard return is a 3.5" projection with a 3" wall bracket. 4", 5", and 6" wall brackets also available. ottom of valance is sewn and includes an aluminum slat insert. Valance width cannot exceed the maximum roll width of fabric selected, as any seaming will likely be visible (see fabric specifications, pages 4 to 5). Railroading is an option for some fabrics but not all. For patterned fabric, railroading the valance will result in a different look than that of the shade. For roller shades, valances can be mounted with Velcro aluminum track using wall or ceiling brackets or with plastic Velcro angle for ceiling mounting only. LIGHT GP MY INRESE WHEN: 1. USING FRIS WHIH TEND TO TELESOPE. 2. THE WIDTH TO HEIGHT RTIO IS 1:2.5 OR GRETER. MOUNTING OPTIONS Wall Mount Velcro Track rackets vailable in 3", 4", 5" & 6" 3 1/2" Return Standard eiling Mount Using Velcro ngle 1" 5/8" 2017 Retail Price Guide - 13/02/2018 page 29

20 VLNE & ENLOSURE OPTIONS PV Valance FETURES ND ENEFITS Standard height is 3.5" vailable with or without returns. Standard return is a 3.5" projection. Matching fabric insert. an be ceiling or wall mounted. Minimum jamb depth is 1.5" Extended brackets are available. LIGHT GP MY INRESE WHEN: 1. USING FRIS WHIH TEND TO TELESOPE. 2. THE WIDTH TO HEIGHT RTIO IS 1:2.5 OR GRETER. MOUNTING OPTIONS Minimum Jamb Depth 1 1/2 3 1/ /2 Standard Return 2017 Retail Price Guide - 13/02/2018 page 30

21 VLNE & ENLOSURE OPTIONS Hanger & losure for Recessed Pockets Pocket 5" Window Mullion 5" eiling Window Glazing Hanger & losure 5"x5" POKET IS REOMMENDED FOR ESE OF INSTLLTION. OMPONENTS P1 P2 P3 ottom Enclosure (Full length of opening) Hanger (2" pieces) over (Full length of opening) FETURES ND ENEFITS ommercial grade aluminum construction. ottom enclosure conceals roller and components for a seamless integrated look. an be mounted inside 4" to 5" pockets or larger. ompatible with manual and automated systems. vailable in white and anodized as a standard, any other colours are custom ordered. over is available to conceal bottom of the drywall edge. ottom encloser is removable for easy access for shade maintenance. Order odes H4 = Hanger and losure with rush for 4"-5" Pocket H4 = Hanger and losure with over and rush for 4"-5" Pocket H5 = Hanger and losure for 5" Pocket H5 = Hanger and losure with over for 5" Pocket 2017 Retail Price Guide - 13/02/2018 page 31

22 VLNE & ENLOSURE OPTIONS Hanger & losure for Recessed Pockets Hanger & losure is compatible with various pocket sizes. STNDRD - WITHOUT OVER 4" - 5" Pockets 5" and Large Pockets P2 H4 P2 H5 rush P1 P1 2 5/8 3 3/4 OPTIONL - WITH OVER 4" - 5" Pockets 5" and Large Pockets P2 H4 P2 H5 rush P1 P1 2 5/8 P3 3 3/4 P3 WHEN OTTOM ENLOSURE IS UT DOWN RUSH STRIP WILL E INSERTED Y SUN GLOW TO PROTET THE FRI FROM THE UT EDGE. MOUNTING OVERVIEW 3" P2 P2 3-4 P2 3" Hangers P2 are provided as a standard. Each hanger should be placed 3" from either end of the pocket. dditional hangers should be placed every 3-4 evenly spaced along the pocket wall. 1.5" wood mounting screw is provided with each Hanger P2. 1.5" Wood Mounting Screws Ensure the screws used are appropriate for each application Retail Price Guide - 13/02/2018 page 32

HIN OPTIONS hain Finishes FETURES ND ENEFITS Sun Glow s standard is stainless steel chain, other options include: poly white, black, grey, linen, brown and clear.

23 HIN OPTIONS hain Finishes FETURES ND ENEFITS Sun Glow s standard is stainless steel chain, other options include: poly white, black, grey, linen, brown and clear. hain hold downs are provided as a standard with each chain HIN hain hold downs come in a clear finish only. HIN HOLD DOWN Order odes: Stainless Steel: SS Poly White: PW Poly lack: P Poly Grey: PG Poly Linen: PL Poly rown: PR Poly lear: P SFETY WRNING TGS ND LELS Tension device warning tag (attached to cord or tension device, double-sided in English and French) Retail Price Guide - 13/02/2018 page 33

24 HEM OPTIONS Please note that your choice of hem is included in the price of all Roller Shades. PLIN HEM 1.75" sewn pocket with aluminum slat insert. For Vinyl fabric a wood slat is used instead. Sides are left unsewn unless otherwise specified. Order ode: Plain Hem: PH Plain Hem w/ Stitched Sides: PHS 1 3/4 SLIM R luminum hem bar with slim profile. Ideal for side channel applications. Order ode: Slim ar: S 1 Slim ar white linen anodized dark bronze black End ap white linen grey brown black Wrapped bottom bar 1 Same as aluminum valance or 2 Same as chain colour or 3 Match with Fabric olour 2017 Retail Price Guide - 13/02/2018 page 34

HEM R luminum hem bar with contemporary clean look. The ccubar can be wrapped with shade cloth on one side.

1 1/4 Only the interior facing side of the ccubar is wrapped. The exterior side of the ccubar is left exposed.

25 HEM OPTIONS Please note that your choice of hem is included in the price of all Roller Shades. URIL HEM R luminum hem bar with oval profile. Order ode: ccurail: 1 ccurail white linen anodized light bronze dark bronze black End ap clear clear clear black black black UR HEM R & WRPPED HEM R luminum hem bar with contemporary clean look. The ccubar can be wrapped with shade cloth on one side. Sun Glow does not recommend using a wrapped ccubar with Vinyl, SW4400, SW4800 or SW /4 Only the interior facing side of the ccubar is wrapped. The exterior side of the ccubar is left exposed. Order ode: ccubar: Wrapped ccubar: W ccubar white linen anodized light bronze dark bronze black End ap white linen grey brown brown black Wrapped bottom bar 1 Same as aluminum valance or 2 Same as chain colour or 3 Match with Fabric olour 2017 Retail Price Guide - 13/02/2018 page 35

26 HEM OPTIONS Please note that your choice of hem is included in the price of all Roller Shades. DEORTIVE HEM STYLES Toronto - min. width 30" - Houston - min. width 30" hicago - min. width 60" New York - min. width 30" Las Vegas - min. width 60" Los ngeles - min. width 40" Montreal - min. width 30" Vancouver - min. width 40" algary - min. width 30" Miami - min. width 30" San Francisco - min. width 30" Halifax - min. width 40" - = Not recommended for widths greater than 60 inches. 1/2" Gimp 1" Loop 2" hainette olours available in white, fawn, and eggshell for gimp, loop, and chainette. Order odes: Plain Hem with Gimp: PHG Decorative Hem with Gimp: PH DG Decorative Hem with Gimp and 1" Loop: PH DG1 Decorative Hem with Gimp and 2" hainette: PH DG Retail Price Guide - 13/02/2018 page 36

27 ROOM DRKENING OPTIONS LKOUT SYSTEM TYP. MOUNTING SREW TYP. OVER P FE MOUNT TYP. RUSHES TYP. MOUNTING SREW LTERL MOUNT TYP. PRE-DRILLED HOLE Order ode: Side hannels: S Side and ottom hannels: S FETURES ND ENEFITS Eliminates 99% of direct light. small amount of indirect light may still be visible. luminum 2.5" side and bottom channel with brush. Recommended for inside mount applications. We pre-drill to your specifications based on lateral or face mount. vailable in anodized, white, dark bronze, and black. Maximum length of 16 feet. ottom bar options are limited to Slim ar or Plain Hem. Recommended use with X, Fascia and Vision Retail Price Guide - 13/02/2018 page 37

CF CASSETTE / FASCIA SUITE PRODUCT SPECIFICATIONS. October 2016

CF CASSETTE / FASCIA SUITE PRODUCT SPECIFICATIONS October 2016 CONTENTS October 2016 SECTION NO. DESCRIPTION PAGE NO. SECTION 1 OVERVIEW 1.1 PART A GENERAL SCHEMATICS 1.1 PART B SYSTEM OPTIONS 1.3 PART