AUSTRALIAN LIFTING CENTRE PTY LTD
|
|
- Clara Armstrong
- 5 years ago
- Views:
Transcription
1 AUSTRALIAN LIFTING ENTRE PTY LT
2 ontents Regular Proof oil Galvanised hain 141 Long Link Proof oil Galvanised hain 141 Security hain 141 S ook 142 Quick Link 142 Snap ook 142 Split Repair Link 143 Lynch Pin 143 R lips 143 Turnbuckle AISI 316 ook & Eye 144 Turnbuckle AISI 316 levis & levis 144 ottle Screws AISI 316 Toggle & Swage Stud 144 Stainless Steel 144 ottle Screw AISI 316 levis Toggle & Toggle 145 Eyebolt AISI316 Long Shank /W Nut & Washer 145 Wire Rope Grips AISI Wire Rope Thimbles AISI Eyenuts AISI Eyebolt With ollar AISI Standard ee Shackles AISI Snap ook AISI 316 /W Eyelet 146 S-ook AISI Fork Terminal AISI Round Ring AISI Saddles AISI
3 Austlift Proof loaded hain are manufactured from low carbon steel and come in a variety of link formations and used for agricultural, industrial, manufacturing, marine and general engineering applications. General purpose hain with a variety of link dimensions Manufactured from low grade carbon steel Available in regular link and long link. Packed in 50kg pails and 500kg drum and cut length. Available in self colour, hot dip galvanized and zinc finish. NOT SUITALE FOR LIFTING APPLIATIONS OERIAL AIN Regular Link, Proof Loaded, Galvanised hain 50KG PAIL PAK UKET IMENSIONS 500KG RUM UT LENGT OE SIZE LENGT OE LENGT OE Mtr Mtr RUM Long Link, Proof loaded, Galvanised hain 50KG PAIL PAK UKET IMENSIONS 500KG RUM UT LENGT OE SIZE LENGT OE LENGT OE Mtr Mtr RUM NOTE: imensions stated are approximate and subject to coercial tolerances. 141
4 Quick Link LIFTING YOUR USINESS TO A IGER LEVEL W Austlift Quick Links are used as a temporary way to connect coercial fittings coonly used with hain. Manufactured with low carbon steel. Sizes available from 4 to 16. Oval shaped with a hex screw lock gateway. Available in zinc plated finish only. X V OE SIZE OPENING IMENSIONS SIZE V W Snap ook E Austlift Snap ooks are used as a temporary way for connecting coercial products and as a light duty hanging devise that snap lock. Manufactured with low carbon steel. Sizes available from 4 to 15 Key hole shaped with a spring catch. Available in zinc plated finish only. OE SIZE IMENSIONS E S ook Austlift S-hooks are coonly used as a hanging devise and other general purpose applications Manufactured with low carbon steel. Sizes available from 3 to 10 S shaped hook. Available in zinc plated finish only. OE SIZE IMENSIONS
5 Austlift Split Links are used as a more permanent way to connect coercial fittings coonly used with hain products. Manufactured from mild steel Sizes available from 3 to 13. hain link shaped with large split gap for ease of attachment. Electroplated finish for anti-corrosion and ease of welding. Split Repair Link OE SIZE IMENSIONS M M Lynch Pin Austlift Lynch Pins are coonly used as a positive securing devise for shaft pins. Pin sizes from 4 to 10 available Made from low carbon steel and zinc plated. OE IMENSIONS R lips Austlift R-lips are coonly used as a removable securing pin for shafts. Pin sizes from 3 to 6 available. Made from low carbon steel and zinc plated. OE IMENSIONS () L() () Wire Suite Shaft Wire Suite Shaft Wire Suite Shaft Wire Suite Shaft L 143
6 LIFTING YOUR USINESS TO A IGER LEVEL STAINLESS STEEL STAINLESS STEEL FITTINGS NOT FOR LIFTING APPLIATIONS. Turnbuckle AISI 316 ook & Eye Austlift Stainless Steel ook and Eye Turnbuckles used as a tensioning devise and coonly use for Architectural, Rigging and Marine applications. ode: Size(d) M5 M6 M8 M10 M12 M16 L L Turnbuckle AISI 316 levis & levis Austlift Stainless Steel levis and levis Turnbuckles used as a tensioning devise and coonly use for Architectural, Rigging and Marine applications. ode: Size(d) M5 M6 M8 M10 M12 M16 L L A ottle Screws AISI 316 Toggle & Swage Stud Austlift Stainless Steel levis Toggle and Stud ottle Screw used as a tensioning devise and coonly use for Architectural, alustrade Rigging and Marine applications. 144 ode: Size(d) M8 M10 M12 M16 M20 L L A ROPE(Φ)
7 ottle Screw AISI 316 levis Toggle & Toggle Austlift Stainless Steel levis Toggle and Toggle ottle Screw used as a tensioning devise and coonly use for Architectural, alustrade Rigging and Marine Applications. ode: Size(d) M8 M10 M12 M16 M20 L L A Wire Rope Grips AISI 316 Austlift Stainless Steel Wire Rope Grips are for use with Stainless Wire Rope to form a loop to produce a termination for Architectural Rigging applications. ode: Size A M3 M4 M5 M6 M8 M10 M12 Wire Rope Thimbles AISI 316 Austlift Stainless Steel Wire Rope Thimbles are for use with Stainless Wire Rope to form a protective loop to produce a termination for Architectural Rigging applications. ode Size x3 3.5x4 4x5 5x6 6x7 7x8 9x10 10x12 12x Eyebolt AISI 316 Long Shank /W Nut & Washer Austlift Stainless Steel ollared Eye olt Long Shank, used as an anchor point and with long shank has a wide variety of applications. ode: Size() M6x80 M8x80 M10x100 M12x Φ Φ 145
8 Eyebolt with ollar AISI 316 LIFTING YOUR USINESS TO A IGER LEVEL Austlift Stainless Steel ollared Eye olt, used as an anchor point and has a wide variety of applications. Φ ode: Size() M6 M8 M10 M12 M Φ Eyenuts AISI 316 Austlift Stainless Steel ollared Eye Nut, used as an anchor point and has a wide variety of applications. Φ ode: Size() M6 M8 M10 M12 M Φ Standard ee Shackles AISI 316 Austlift Stainless Steel ee Shackles, used as a temporary connection devise and has a wide variety of applications. ode: Size() d Snap ook AISI 316 /W Eyelet Austlift Stainless Steel Snap ook, used as a temporary connection devise and has a wide variety of applications. ode: Size L
9 Austlift Stainless Steel Fork Terminal used as a wire termination and coonly use for Architectural, alustrade, Rigging and Marine applications. Fork Terminal AISI 316 ode: Size A L L S-ook AISI 316 Austlift Stainless Steel S-ook used as a hooking devise and has a wide variety of applications Round Ring AISI 316 Austlift Stainless Steel Round Ring used as a ring devise and has a wide variety of applications ode: Size IN 3/16 1/4 9/32 5/ A Slide uckle AISI 316 Austlift Stainless Steel Slide uckle used as an adjustable fitting for webbing and has a wide variety of applications Φ ode: Size(d) Φ Austlift Stainless Steel Saddle used as an as an anchor point and has a wide variety of applications Saddles AISI 316 ode: Size 3 A() 65 a() 51 () 34 E() 6 ode: Size () L W Austlift Stainless Steel Wire Rope Products Please check Page
10 SYNEY 43 Frank Street Wetherill Park, NSW 2164 T F MELOURNE 47 Technology rive, Sunshine West VI 3020 T F PERT Unit 5, 2-4 Mallaig Way anning Vale WA 6155 T F RISANE 7 urbell St Acacia Ridge, QL 4110 T F
AUSTRALIAN LIFTING CENTRE PTY LTD AUSTLIFT
AUSTRALIAN LIFTING ENTRE PTY LT 1300 100 120 WWW..OM.AU PF compression, OR, web optimization using a watermarked evaluation copy of VISION PFompressor ontents Regular Proof oil Galvanised hain 141 Long
More informationRigging and Miscellaneous Fittings
Turnbuckle Eye & Eye 0006 4MM 0121 5MM 0122 6MM 0123 8MM 0124 10MM 0125 12MM 0126 16MM Turnbuckle Jaw & Jaw 0137 5MM 0138 6MM 0139 8MM 0140 10MM 0141 12MM 0142 14MM 0143 16MM Turnbuckle Hook & Hook 0001i
More informationTURNBUCKLES MM INCHES MM INCHES MM INCHES INCHES INCHES
HARDWARE: MEASUREMENTS CLOSED OPEN TURNBUCKLES MM INCHES MM INCHES MM INCHES INCHES INCHES 207020 STEEL 11MM 0.43 196MM 7.72 8MM 0.31 7.72 11.50 207021 STEEL TYPE 316 10MM (3/8 ) 12MM 0.47 238MM 9.37 10MM
More informationSWIVELS- Y-LINK, ANGULAR CONTACT BEARINGS
First ever angular contact bearing design- developed 1 st by Miller Standard models with Working Load Limits from 0.45 through 300 tons Specials available with Working Load Limits up to 1000 tons Wire
More informationGeneral hardware items are designed for multiple purpose usage. Most general hardware items are electro-galvanized.
General Hardware Applications General hardware items, such as carabine hooks, quick links and s-hooks, are suitable for many different applications in various market segments like agriculture, industry,
More informationDon t see the size, color or product you are looking for? Give us a call (800) or
Don t see the size, color or product you are looking for? Give us a call (00) -9 or email customerservice@handimanmarine.com Copper Stop 0 Bags/Box For / Wire Diameter For / Wire Diameter For / Wire Diameter
More informationHOBSON STAINLESS HARDWARE INDEX. Page CHAIN LINK 1 CLIP POLISHED CHAIN LINK POLISHED 2 CHAIN LINK QUIK POLISHED 2 EYE BOLT KIT 3
HOBSON STAINLESS HARDWARE INDEX Page CHAIN LINK 1 CLIP POLISHED CHAIN LINK POLISHED 2 CHAIN LINK QUIK POLISHED 2 EYE BOLT KIT 3 EYE BOLT KIT WITH COLLAR 4 EYE BOLT WITH COLLAR 4 SADDLE EYE STRAP 5 EYE
More informationRIGGING & CANVAS FASTENERS
BOATING ACCESSORIES ELECTRICAL ENGINE ACCESSORIES SPECIALTY FASTENERS FASTENERS Copper Stop Don t see the size, color or product you are looking for? Give us a call (00) 5-7977 or email customerservice@handimanmarine.com
More informationnls Product List 1st February, 2014 Tel: Fax: Coombes Drive, Penrith, NSW, 2750 Australia
15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical Accessories Code Item Inner
More informationPO Box (fax)
4 Everts Avenue PO Box 208 Glens Falls, NY 280 800 8 998 8-9-008 (fax) www.henssgenhardware.com info@henssgenhardware.com 800 8 998 About Us - Snap Hooks & Pulleys Distributor Henssgen Hardware was established
More informationTWISTLOCKS - FLATBED TYPE RETRACTABLE
3 1/4" 825 MM MODEL 1101-1132 Ø4 3/4" 1205 MM 13/16" 20 MM 1110-4507 SPLIT ROLL 1109-1132-3 1101-1132-6 POSITIONER SHOWN IN POSITION FOR LEFT LOCKING 1109-1132-1 5 1/16" 128 MM 7 1/8" 181 MM 1105-1132-2
More informationT-Nuts St. Industrial Profile Systems Fasteners. Technical Data. Application. Ordering Information. Catalog /US T-Nuts
atalog 1816-3/US St Standard T-nuts conveniently roll into profile T-slots at any location. The spring/ball locking feature keeps the T-nut in place in vertical applications. Standard mounting elements
More informationRigging & Sail Handling
Rigging & Sail Handling Wykeham Martin Furling Gear Mast Bands Davey Ash Blocks Deck Leads Shroud Plates Gaff Span Shackles Brass Track & Slides Spinnaker Pole Fittings Highfield Levers Rigging Screws
More informationXS Roof Type Overview
XS Roof Type Installation Overview XS Linked CABLE system ON STEEL ROOF Rigorous testing has proven the strength and resistance of the XS Linked Cable System on a steel roof. The main components of an
More informationElectrical Accessories 1st June, 2016
15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical Accessories Code Item Inner
More informationNational Light Sources Pty Ltd Electrical Accessories - Date 8th April, Coombes Drive, Penrith, NSW, 2750 Australia
National Light Sources Pty Ltd 15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical
More informationCROSSARMS 1-1. SIZE: 100 x 50 x 10.73kg/m, 2.4m LONG MOUNTED FOR CUT OUT BRACKET DESCRIPTION: H-POLE MOUNTED VOLTAGE REGULATOR PLATFORM D-DT #: 3016
DESCRIPTION: STEEL CHANNEL CROSSARM D-DT #: 3000 CROSSARMS 1-1 NOTES: SAP #: 0189877 STEEL CHANNEL CROSSARM; H-POLE SIZE: 100 x 50 x 10.73kg/m, 2.4m LONG MOUNTED FOR CUT OUT BRACKET MATERIAL: STEEL PARALLEL
More informationFits 1 3/4" Resilient Rings. Part # Shaft Height A" 92-A /4" 4.4" 92-A /4" 4.6" Fits 2 1/2" Resilient Rings. Part # Shaft Height A"
Bases 48 Frame Resilient Mount Kit 92-A240 9" Blowers( 2 1/2" Rings) 92-A241 12" Blowers ( 2 1/2" Rings) 92-A242 10" Blowers (2 1/2" Rings) Accessories Base Mounting Adapter Kit For 5 1/2" with flat end
More informationSmartpak Hardware, Little Brother of Maxpac
HD17S Glass Plates Quantity Boxed 20918S Slotted Electro Brassed 32mm (1.1/4") 4 10 22119S Slotted Chrome Plated 32mm (1.1/4") 4 10 20918S 22119S 20266S Round Electro Brassed 19mm (3/4") 4 10 20919S Round
More informationELECTRIC TOOL PARTS LIST
Hitachi Power Tools LIST E478 ELECTRIC TOOL PARTS LIST ROTARY HAMMER Model 2004 5 30 (E1) 1 2 3 4 5 6 23 24 7 8 9 10 25 26 17 18 27 28 29 30 31 32 33 34 11 35 12 36 13 14 37 38 15 16 19 20 21 22 54 55
More informationNorth US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183
North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06
More informationLow-Intensity Infrared SAL
Low-intensity infrared SAL Page 1 6 Optical characteristics 10cd fixed or flashing 32cd fixed or flashing Colour aviation RED Horizontal beam 360 Vertical beam +6 +10 Low-Intensity 10 and 32cd with Stand-alone
More informationLIST NO. F409 ROTARY HAMMER. Model DH 28PD (E1) DH28PD 22% TU Rev.1
Model ROTARY HAMMER LIST F409 (E1) 2009 9 7 22% TU01658 DH28PD Rev.1 113 1 2 3 4 5 6 7 8 9 10 11 14 15 16 20 21 17 18 22 23 24 25 29 27 30 31 19 32 33 34 35 36 37 38 62 63 64 67 68 69 65 66 70 71 72 73
More informationOnline version - not for reprint
(0) A Engine housing... B Cylinder... B Cylinder... C Rewind starter, Ignition system... C Rewind starter, Ignition system... D Chain brake... E Quick tensioner parts... F Air filter, Cover... G Handle
More informationICAO Low-intensity Type A (10cd) + Infrared 850nm ICAO Low-intensity Type B (32cd) + Infrared 850nm
DATASHEET ICAO Low-intensity Type A (10cd) + Infrared 850nm 05 Feb 2016 Low-Intensity 10cd and 32cd with Infrared 850nm Stand-alone LED Aviation Obstruction Lights Low-intensity red aviation warning light
More informationROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.
ROUND BEND U-BOLTS Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2)
More informationPrime Railway Services Radial Door - Order Form
Radial Door - Order Form Prime Part # 1130 Customer/Location: Tel: Fax: Quantity: Door ID#: Door Type: Tri Bi Door Location: BR BL AR AL BL Doors Only: Sliding Door or Pan Exterior Door Colour Red Yellow
More informationTerminals, Lugs, and Fasteners
Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying
More informationTRELLIS HARDWARE. When Quality & Service Matter...
TRELLIS HARDWARE When Quality & Service Matter... Trellis Hardware Guy Wire & Fittings Pole Hardware Earth Anchoring Systems Phone (800) 431-3095 www.fehr.com/trellis Fax (888) 352-1790 Volume 2 Copyright
More informationTechnical Data Sheet Screw Clamps and Universal Clamps
Technical Data Sheet Screw Clamps and Universal Clamps Stepless Screw Clamps PG 178 2 PG 178 for small diameters PG 178 for big diameters Bridge Tongue-in-groove design Interlock with multiple diameter
More informationICAO Low-intensity Type A Obstruction Light (10cd) with infrared ICAO Low-intensity Type B Obstruction Light (32cd) with infrared
DATASHEET 05 Feb 2016 Key features - Night Vision Goggles compatible - Based on LED-technology - Extremely reliable with long lifetime - Suitable for off-shore use - Very low power consumption - Wide input
More informationHusqvarna X4000. Illustrated Parts List Jun 2009
Husqvarna Illustrated Parts List -0 0 Jun 00 MAINFRAME 00 000 MAINFRAME ASSEMBLY, 000 COVER, BELT GUARD 00 WHEEL COVER 000 ROLLCAGE, RIGHT 000 ROLLCAGE, LEFT 00 BLOCK, SPRING 00 BRACKET, ACTUATOR MOUNT
More information3000j UT Page 1 of 24 Air Filter & Carburetor
3000j UT-26034 Page 1 of 24 Air Filter & Carburetor 3000j UT-26034 Page 2 of 24 Air Filter & Carburetor Ref # Part Number Qty S/P/F Description 1 07752 1 S SCREW & WASHER Torque Specs: 35-45 2 07754 1
More informationROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.
Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2) hex nuts. In addition,
More informationP143 Pressure Regulator
P Pressure Regulator Versatile ontrol Accuracy ompact esign Low Pressure ut-off The Type P pressure regulator is ideal for natural gas, air, propane and general purpose gas pressure regulation. Uses include
More informationHusqvarna X2000E. Illustrated Parts List ConstructionParts.com ConstructionParts.com. ConstructionParts.
Husqvarna X000E Illustrated Parts List -0 0 Jun 00 MAINFRAME ASSEMBLY 0 X000E 000 MAINFRAME ASSEMBLY, X000 000 SHSB, / x / 00 SHAFT, ARBOR LOCK 00 FRAME, ROLL CAGE, X000 0 COVER, BELT GUARD 00 COVER, BELT
More informationMETRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL
METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL CHAINWHEELS Page 2 Ductile Iron wheels Sprocket-Type, for use with Single Loop Cut Used to operate overhead valves from
More informationOWNER & OPERATOR INSTRUCTION MANUAL
For service contact: German Knife Inc. -00-00- www.turboairinc.com OWNER & OPERATOR INSTRUCTION MANUAL Model No. GBS-0S IMPORTANT SAFETY NOTICE To ensure safe and trouble free performance of you new German
More informationBG 240. Spare parts list. Trowel. Valid from serial number Atlas Copco Construction Tools AB No c
BG 0 Spare parts list Trowel BG0 HSQP BG0 HSQP BG0 HSTP BG0 HSTP Valid from serial number BGB00000 BGB00000 BGF000000 BGF000000 0 Atlas Copco Construction Tools AB No. 900 0 0c 00 BG 0 Contents Contents
More information"B" COLLETS SOYER COLLETS
STUD DIA. 3 mm CDB-003M 14 Ga CDB-008 12 Ga & #4 CDB-010 1/8 Ga & #5 CDB-012 10 Ga & #6 CDB-013 4 mm CDB-004M #8 CDB-015 #10 & 5 mm CDB-018 6 mm CDB-006M.215" CDB-021 1/4" CDB-025 5/16" & 8 mm CDB-031
More informationOnline version - not for reprint
(0) A Crankcase, Cylinder... X Tools, Extras... B Rewind starter... C Rewind starter ErgoStart... D Muffler... E Ignition system, Clutch... F Engine housing (Wrap around handle)... G Engine housing (Wrap
More information060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
More informationTransport. Hi Tensile Chain / Links. Section 8. Hi Tensile Grade 70 Transport Chain. Hi Tensile Mid Links
Hi Tensile Chain / Links Hi Tensile Grade 70 Chain Size Finish Lashing Capacity 0958 6MM Gold 2.3T 0959 7MM Gold 3.0T 0960 8MM Gold 3.8T 0960Ix9 8MM x 9M c/w hooks Gold 3.8T 0961 10MM Gold 6.0T 0962 13MM
More informationOTHER FLAGPOLES 3 Other flagpoles FLAGMORE ACTION / Flagpole 6-2 meters Flagpole for temporary in ground installation. Delivered complete with cleat holes. Cleat holes on,5 m from the bottom or at any
More informationLoad Pins Custom Build Load Pins
Features Load Pins Custom Build Load Pins 0.5-500Te capacities available. Overload 200% of rated capacity. Ultimate breaking load >500% of rated capacity. Temperature compensated wheatstone bridge. Stainless
More information651 EXTRACTOR 670 SCREWED SOCKET HEAD SOCKET SET SCREWS CAP SCREWS. Page Page SOCKET HEAD COUNTERSUNK SCREWS SOCKET HEAD
600 SOCKET HEAD CAP SCREWS 602 SOCKET SET SCREWS Page...........596602 Page.......................603 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS 615
More information410 Chain Saw UT B Page 1 of 10 Engine & Peripherals
410 Chain Saw UT-10486-B Page 1 of 10 Engine & Peripherals 410 Chain Saw UT-10486-B Page 2 of 10 Engine & Peripherals 1 82253 3 /P SCREW- Pan hd. (8-32 x 3/8") 2 93628 1 /P COVER- Clutch 3 93639 1 S SPIDER-
More informationProducts Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased durability easy and quick installation reasonable
More informationPARTS LIST MODEL: HD22
MODEL: HD MODEL: HD 0 0 MODEL: HD KEY PARTS NO. NO. DESCRIPTION 0 0 0 000 00 0000 000 000000 0 0000 000 0000 00 0000 0000 0000 000 000 00 00 00 000000 000 00 00 0000 0 000 00 0000 0000 000000 0000 0000
More informationPanel Enclosures. Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet
Panel Enclosures Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge steel (see page 153) All continuous
More information3000M UT Page 1 of 28 Air Cleaner
3000M UT-26021 Page 1 of 28 Air Cleaner 3000M UT-26021 Page 2 of 28 Air Cleaner Ref # Part Number Qty S/P/F Description 175 GM240308 1 CLEANER ASSY Includes ref 178 thru 182 176 GM002811 1 SCREW & WASHER
More informationBolt 1/4"x 2" Grade 2 Zinc , , , Nyloc Hex Nut 5/16" , , ,
Color Logo use on white background only Parts Details LH00, LH000, LH00, LH000, Track Sections & Engines Updated: //0 TIE DOWN ENGINEERING Villanova Drive SW Atlanta, GA 0 www.tiedown.com (0) -0000 Fax
More informationRebounder Rebounder Painted Weldments... Rebounder Connecting Hardware... Rebounder Assembly... Slam Station Assembly...
Synrgy 0 Training Systems Parts Manual //0 Table Of Contents Cable Cable Left Painted Frame Weldments... Cable Right Painted Frame Weldments... Cable Components... Cable Components Legend... Cable Carriage...
More informationlindab duct suspension & support system Duct suspensions & Support systems
Duct suspensions & Support systems Content Duct suspensions & Support systems Duct suspension Duct suspension FB... UVH... 0 UVH0... 0 Threaded rod OSB 0...0 DRSN... 0 DRSNR... 0 Channels and channel brackets
More informationConnect. Electricians' tools, consumables and enclosures x 210.0mm x 210.0mm. 26.0mm. 6.0mm. 6.0mm. 6.0mm. 12.0mm.
Connect Electricians' tools, consumables and enclosures Tooling and consumables which includes hand tools, crimping tools and solar tools for MC3 & MC4 connectors, electrical insulation tapes, cable pulling
More informationsecurity fasteners for every application
security fasteners for every application Welcome to Hafren 2 Specifying & Ordering Hafren Security Fasteners 5 2-Hole Screws 6 Pin Hex Screws 8 6-Lobe Pin Screws 10 6-Lobe Pin Self Drilling Screws 12 6-Lobe
More informationAIR TERMINALS: COPPER
AIR TERMINALS: COPPER A ADAPTER TYPE B LESS ADAPTER LA TYPE A B C A B C A B C 3 8 COPPER POINTS (CLASS I ONLY) 1 2 COPPER POINTS (CLASS I OR II) 5 8 COPPER POINTS (CLASS I OR II) THE 3 8 COPPER AND ALUMINUM
More informationInvisible Hinges Page
Finish: Izerwaren Invisible Hinges Page -4-1-1 Seawater Resistant Satin nickel plated MINI INVISIBLE HINGES WITH STAINLESS STEEL PINS invisible hinge for minimum door thickness 1/2 Small Invisible Hinge
More informationLIST NO. F423 ROTARY HAMMER (E1) Model DH 28PMY
Model ROTARY HAMMER LIST F423 2014 4 2 (E1) A A 5 6 7 8 9 17 18 19 20 21 22 23 11 13 14 15 12 24 25 26 27 28 29 30 31 32 33 34 35 36 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58
More informationPARTS DESCRIPTION LISTING
PARTS DESCRIPTION LISTING Form 4-157e, 11-09 Sheet 2 of 6 Index No. Part Number Description A 16-889-1 TUBE ASSEMBLY, CAMERA SUPPORT CM (See Sheet 5) B 69-1063-1 COVER, ASSEMBLY BACK DSP600 (See Sheet
More informationSCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL
SCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL Page INTRODUCTION Thank you for purchasing the Schneider Optics DiStar+HD projector lens. With the Schneider DiStar focus mount,
More informationTempofor. Mobile fences
Tempofor Mobile fences Betafence Quality Betafence strives relentlessly for optimum quality, without losing sight of users own particular requirements. Quality is of prime importance: it begins at the
More informationROTARY HAMMER Model DH 26PC
LIST F418 ROTARY HAMMER Model 2013 5 22 (E1) 1 2 18 19 20 3 4 5 6 21 22 7 8 53 23 24 25 26 27 A 28 29 30 31 11 32 12 33 34 13 35 14 36 15 24 37 16 17 9 A 10 54 41 64 65 55 56 57 58 59 60 42 43 44 45 46
More informationLIST NO. F421 ROTARY HAMMER (E1) Model DH 24PH
Model ROTARY HAMMER LIST F421 2013 5 22 (E1) A 29 73 1 2 3 4 5 6 7 17 8 10 11 12 13 14 15 16 18 19 20 21 22 23 24 25 26 27 28 30 31 32 33 34 35 36 37 A 501 502 503 38 39 9 24 17 40 41 42 43 44 45 46 47
More informationcrocodiletm Exploded views / Part lists
crocodiletm Exploded views / Part lists Rev-date (0-0) On the following pages you will find the parts used to assemble this product. Please note that some spare parts cannot be purchased individually but
More informationExtra Large Full Motion TV Mount for Televisions
8008981 TV Size Range: 47 ~ 84 Maximum Weight Capacity: 60 kg/132 lbs Maximum Mounting Pattern: 800 mm x 600 mm (31.4 x 23.6 ) Distance to the Wall: 5.5-45 cm Extra Large Full Motion TV Mount for 47-84
More informationBOLTS & SET SCREWS M6 SET SCREWS & BOLTS M12 SET SCREWS AND BOLTS M8 SET SCREWS AND BOLTS. All the fixings. listed here. are Grade 8.
BOLTS & SET SCREWS Page updated 171120 Flints stocks a wide range of bolts and set screws. The most popular sizes are listed here. Our distributor holds thousands of tons of stock so if you can t find
More informationMetfab - 7 Ricdanic Drive, BAYSWATER,Vic,3153 Ph:
Mild Steel Flat Mild Steel Flat 10x3 4m Rydal 65x5 6m Flat 13x3 4m Rydal 65x6 6m Flat 13x5 4m Rydal 65x8 6m Flat 16x3 4m Rydal 65x10 6m Flat 16x5 4m Rydal 65x12 6m Flat 16x8 6m Flat 75x5 6m Flat 20x3 6m
More informationSTANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
More informationUT Page 1 of 22 Air Filter & Carburetor
2840 UT-26031 Page 1 of 22 Air Filter & Carburetor 2840 UT-26031 Page 2 of 22 Air Filter & Carburetor Ref # Part Number Qty S/P/F Description 1 07752 1 S SCREW & WASHER Torque Specs: 35-45 In/lbs; 4-5
More informationPARTS LIST. explore 540
explore 0 MODEL:0 0 MODEL: 0 KEY PARTS NO. NO. DESCRIPTION 0 0 0000 000 00 0000 00 0 00 0000 0 000 000 0000 000 00000 000 000 000 0000 0000 0000 000 0000 0000 00000 00 Face plate (unit) Face plate Thread
More informationSno-Thro. Parts Manual. Models ST8526LE ST8526LE A 9/04 Printed in USA
Sno-Thro Parts Manual Models 0 - STLE 0 - STLE 0000A /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you
More informationx:panda Exploded views / Part lists
x:panda Exploded views / Part lists Rev. date 12.201 On the following pages you will find the parts used to assemble this product. Please note that some spare parts cannot be purchased individually but
More informationCABLE ROUTING SYSTEMS. WIRE CABLE TRAYS - standard open trays PRODUCT INFORMATION
C L E S N I T T I O N CLE ROUTING SYSTEMS WIRE CLE TRYS - standard open trays PROUCT INFORMTION Table of Contents Open cable trays S25 - S26, S30M - S35W.... Pgs 4-5 Open cable trays S36 - S39W, S30- -
More informationANCHORS EARTH HARDWARE POLELINE AERIAL DROP HARDWARE ATTACHMENTS DROP GROUNDING HARDWARE BANDING TOOLS ANCHORS WALL FASTENERS
EARTH ANCHORS POLELINE HARDWARE AERIAL DROP HARDWARE DROP ATTACHMENTS GROUNDING HARDWARE BANDING TOOLS WALL ANCHORS 2009-2010 FASTENERS EA1 Single Solid Square Hub Power Driven Anchor Installation is performed
More informationFLEXBOX. Installation Guide
FLEXBOX Installation Guide FLEXBOX 1 Important Safety Instructions WEIGHT LIMIT MAXIMUM WEIGHT 50 LBS. THE STRUCTURE TO WHICH THE BOX IS MOUNTED (CEIL- ING, WALL, TABLE, POLE) MUST BE ABLE TO SUPPORT FIVE
More informationPrint Mechanism Maintenance Kit
Print Mechanism Maintenance Kit Installation Instructions This kit includes the parts and documentation necessary to install the print mechanism maintenance kit in the following printers: ZT0 ZT0 ZT0 Read
More informationMODELS MR44B & MR44K (See drawings below for additional parts)
MODELS MRB & MRK (See drawings below for additional parts) 0 Cup Washer $. 00 Wir e Lock Pin,." x.0" $. 00 Screw Pin Shackle Clevi s $. 00 Worm Drive Hose Clamp (-/" to -/" Clamping Dia.) $. 0 Single Split
More informationStainless Steel Hatch Fasteners Page
Izerwaren numbers Stainless Steel Hatch Fasteners Page -4-3-0-0 hatch fasteners, flush type with separate key sea water resistant - leak proof finish: rolled Installation: Drill hole: 22.5 mm Ø / 7/8 Back
More information1 AM-167/202/242/282/322 Parts Manual. Table Of Contents
AM-167/202/242/282/322 Parts Manual Table Of Contents Mower Beam with Bearings...2 Mower Beam with Bearings...4 Cutting Discs...6 Main Gearbox...8 V-Belt Pulley...10 Headstock...12 Carrier Beam...14 V-Belt
More informationConnect Electricians' tools, consumables and enclosures
Connect Electricians' tools, consumables and enclosures 220 Tooling and consumables including electricians' hand tools, electrical insulation tapes, cable pulling socks, morse hole saws & accessories
More information300 Chain Saw UT Page 1 of 17 Accessories I
300 Chain Saw UT-10687 Page 1 of 17 Accessories I 300 Chain Saw UT-10687 Page 2 of 17 Accessories I A-02177 A02177 1 BUMPER SPIKE KIT 9477299 9477299 1 /P RUBBER TUBING (10') 18453 18453 1 /P GREASE- Multi-Purpose
More informationStairtreads and landings
Stairtreads and landings Stairtreads and landing Weland manufactures straight stairtreads and landings from grating, slit plank type flooring and plank type flooring. The majority of the stairtreads and
More informationOWNER & OPERATOR INSTRUCTION MANUAL
For service contact: German Knife Inc. -00-00- www.turboairinc.com OWNER & OPERATOR INSTRUCTION MANUAL Model No. GBS-0S IMPORTANT SAFETY NOTICE To ensure safe and trouble free performance of you new German
More information180 Olcott St Manchester, CT USA Local Fax Empire Industries, Inc.
EMPIRE I N D U S T R I E S I N C. Empire Industries Inc. is proud to present its new Engineering Catalog, Number 00. This catalog contains a complete line of pipe hangers, supports and related products.
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT
More informationTB146EC 21AK146G966 Page 1 of 7 Engine Assembly version 1
TB146EC 21AK146G966 Page 1 of 7 Engine Assembly version 1 TB146EC 21AK146G966 Page 2 of 7 Engine Assembly version 1 1 753-06237 1 Engine Cover Assembly (Incl. Ref No. 2 & 3) 2 710-04194 1 /P Cover Screw
More informationModel 2704 Parts List * = Standard Equipment 〇 = Circuit Diagram
2704 11-05 99 98 97 82 88 89 83 84 85 86 87 101 103 100 106 81 71 105 104 73 74 75 76 77 78 80 79 57 62 58 56 63 65 66 67 68 64 69 70 59 60 61 31 30 29 32 34 35 41 40 42 36 37 38 39 43 4445 46 21 22 20
More informationSuperstrut. Metal Framing. Threaded Products and Hardware. Channel Nuts. Design Data. Screw Threads. Spring Nut Selector Chart
Channel Nuts Superstrut channel nuts are manufactured from Grade 2 mild steel and are case hardened. Data Superstrut self aligning channel nuts are designed to provide resistance to pullout and resistance
More informationIndex. Aluminum. Channel. Coil. Floor Plates. Angles. Flats. Beams. Expanded Metal. Hexagons. Angle Bar Beams Galvanized...
Index Aluminum Angle... 69 Beams... 69 Channel... 69 Color / Painted... 74 Channel Bar... 3 Galvanized... 4 Junior... 4 Structural... 3-4 Expanded Metal... 70 Flats... 71 Pipe... 72 Plates... 73-74 Rounds...
More informationZT 1844XL & ZT 2148XL
ZT XL & ZT XL Parts Manual Models 00 hp - XL 0 hp - XL 0000B /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide
More information604 SOCKET HEAD BUTTON SCREWS
600 SOCKET HEAD CAP SCREWS Page........626 634 602 SOCKET SET SCREWS 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS Page........635 636 Page........637
More informationCS3314 Chain Saw UT R Page 1 of 12 Carburetor & Accessories
CS3314 Chain Saw UT-10734-R Page 1 of 12 Carburetor & Accessories CS3314 Chain Saw UT-10734-R Page 2 of 12 Carburetor & Accessories Ref # Part Number Qty S/P/F Description A03904 1 /P Gasket/Diaphragm
More informationVacuum Maintenance Manual (EXCERPT Tim Benedict)
1. Position a ladder, scaffold, or work stand, on the right side of Vacuum Skid where the blower motors are installed. 2. Locate the six (6) vacuum hoses connecting the blower motors to the HEPA housings
More information1.8 METER SERIES 1194 ANTENNA SYSTEM
April 20, 2016 REVISION J ASSEMBLY MANUAL 1.8 METER SERIES 1194 ANTENNA SYSTEM General Dynamics SATCOM Technologies 1700 Cable Drive NE Conover NC 28613 USA Phone 770-689-2040 www.gdsatcom.com 1.8 METER
More informationTEX. Spare parts list 18PS 19PE 22PS 23PE 27PS 28PE. Handheld pneumatic breakers Atlas Copco Construction Tools AB No j
TEX 18PS 19PE 22PS 23PE 27PS 28PE Spare parts list Handheld pneumatic breakers 2010 Atlas Copco Construction Tools AB No. 9853 6035 90j 2010-02-19 TEX 18PS 19PE 22PS 23PE 27PS 28PE Contents Contents SPARE
More informationParts / Spares Reference Sheet
Parts / Spares Reference Sheet Graco GMAX 5900 GMAX II 5900/5900HD Standard Series GMAX II 5900/5900HD Standard Series 0 28 22 30 2 5 38 4 46 6 37 50 9 45 2 20 45 43 8 0 52 05 23 40 27 38 5 3 32 33a 33b
More informationFixings for Mobile Radio Base Stations
Fixings for Mobile Radio Base Stations Clamps Cleats Accessories Fixings for Mobile Radio Base Stations The Telegärtner Group is now pleased to include cable clamps and cleats to extend its portfolio of
More informationHarness and Wiring. Seven Way Truck Side Plug. Seven Way Trailer Plug. Front Trailer Harness Seven Way Molded Plug. Four Wire Pigtail Plug
Harness and Wiring Seven Way Truck Side Plug Part #: MPG835 Seven Way Trailer Plug Part #: MPG717RV Front Trailer Harness Seven Way Molded Plug Part Number Length (L) MWH12-5020-01 84 MWH12-5020-00 120
More informationTitan Media Cart. Installation and Operation Manual
Titan Media Cart Installation and Operation Manual Table of Contents INTRODUCTION SERVICE AND SUPPORT... 1 PRODUCT RETURNS... 1 UNPACKING... 1 TITAN SINGLE MEDIA CART... 2 TITAN DUAL MEDIA CART... 2 BEFORE
More information