lindab duct suspension & support system Duct suspensions & Support systems
|
|
|
- Oswin Caldwell
- 6 years ago
- Views:
Transcription
1 Duct suspensions & Support systems
2 Content Duct suspensions & Support systems Duct suspension Duct suspension FB... UVH... 0 UVH Threaded rod OSB DRSN... 0 DRSNR... 0 Channels and channel brackets Rectangular plain washer SB... Supported cantilever CL... CLS... Hexagonal studding connector OSM... Channel RPA... RPC... Eye bolt Circular suspension Duct support EB... DH... RK...0 Channel slide nuts Haer head bolt CN... CNS... CNLS... CNSS... HHB... Duct holder MDH... Haer top screw HTS... Duct holder corner Suspension rings DHC... DHCBR... UV...0 UV0...0 Channel end cap CEC... We reserve the right to make changes without prior notice
3 Content Duct suspensions & Support systems Brackets L-fastener Z-fastener Fastener bracket MP fastener WCL... WCZ... WCLT... WCMP... This document show our different suspensions and their maximum recoended load that is guaranteed by Lindab. The suspensions have been tested to the breaking limit but the presented values are based on when the it start to deform with a safety factors and adapted to ventilation application. Note that the recoended load is stated for a single component and a system approach must be used by the designer. R0 R-R0 max recoended load under normal conditions without fire max recoended load under fire conditions for the time in minutes stated after R * Smoke control max recoended load for smoke control ducts to be used for two hours in a temperature of 00 C Toggle VIPPB... * The load bearing capacity, R, is the ability for a building element to resist a fire when exposed on one or several sides and when supporting an external load during a time period without losing its stability. Brackets Beam clamp WCRVG...0 WCVG... WCZGM... WCLGM... BCT... BC... Frame support system Stand system... We reserve the right to make changes without prior notice
4 Duct suspension FB ensions FB Ø, Ø, FB 0 Ø,0 Ø,0 Ø, 0, FB 0 Ø, Ø, Ø, 0 0, Description Suspension band Suspension bands are designed to suspend air ducts. It is easy to cut and bend and allows a quick and ecoical method of assembly. The perforated suspension steel band is made of steel with assorted holes, which, according to the type selected, allow fixing of threaded rods, threaded clamps, bolts, etc. The small holes can be used with rivets, screws or nails. Type Width Thickness m Material FB 0, galvanized FB 0, galvanized FB 0 0 0, galvanized FB 0 0, galvanized FB 0 0, galvanized FB 0, galvanized FB 0 0 0, stainless FB 0 0,0 stainless FB 0 FB 0 FB 0 FB 0 Ø,0 Ø, Ø, Ø,0 Ø, Ø, Ø, Ø, Ø, Ø, 0 0, 0,, 0, 0,0 Width Thickness FB0 0, We reserve the right to make changes without prior notice
5 Duct suspension FB Technical data Installation Ventilation system Smoke control system R0 R R0 R R0 Type Thickness 00 C 0 min FB 0, 0 FB0 0, 0 FB0 0, 0 FB0 0, 0 FB0, 0 0 FB0 0, 0 FB0, We reserve the right to make changes without prior notice
6 Threaded rod OSB 0 ensions * * * = available in stainless steel. Description The threaded rod is according to the standard DIN -. That means that the thread angle is 0. Property class:. Surface finish: Electro zinc plated. s marked with * also available in stainless steel 0. Installation Ventilation system Smoke control system R0 R R0 R R0 00 C 0 min. M M M ension l Type OSB We reserve the right to make changes without prior notice
7 s Duct suspension SB Rectangular plain washer Surface finish: Hot dipped galvanized. b Thickness 0 b b ension b SB OSM Hexagonal studding connector Used together with threaded rod to reduce wastage to a minimum. Threaded in both ends with a stop in the middle. Material M 0 FZB M 0 FZB M 0 FZB M 0 0 M 0 0 Installation Ventilation system Smoke control system R0 R R0 R R0 00 C 0 min M M M M ension OSM 0 We reserve the right to make changes without prior notice
8 l lindab duct suspension & support systems Duct suspension EB Eye bolt Material M, FZB M, FZB M, FZB M, 0 M, 0 Installation Ventilation system Smoke control system R0 R R0 R R0 00 C 0 min M M M ension EB We reserve the right to make changes without prior notice
9 Duct holder DH ensions Description Used to fix ducts standing on joists. Is provided with fixing holes in the base. Varying height can be arranged by installing two duct supports, one inside the other. These can be locked with two self-tapping screws on each short side. The L dimension can then vary: for Ø 0 between 0 and 00, for Ø 0 between 0 and 0. Can also be delivered in additional sizes. ension Height L DH 0 0 * Reinforced A B L m 0 0 0,0 0, , 0 0,0 0 * 0 0 0, 0 * 0, * 0 0 0, * 0, 0 * 0 0 0, 0 * 0, 00 * , 00 * 0 0, 0 * 0 0 0, 0 * 0, , 0, , , , , 0 0 0,0 0 0, We reserve the right to make changes without prior notice
10 Duct holder DH Technical data Installation Ventilation system Smoke control system R0 R R0 R R0 00 C 0 min 0 0 We reserve the right to make changes without prior notice
11 Duct holder MDH Ø 00 M h b d Description The folded shape of the duct holder and its multiple of fixation points makes the duct system very firmly attached. The duct holder is suitable for of all types of duct mounting. I.e. vertical and horizontal onto a wall, hanging under a ceiling and standing on a floor. The screw holes are easy to access and shaped like double key-holes which makes the mounting fast and easy. Ø 0 0 h The duct is fastened with help of suspension rings UV0 or UVH0, which are threaded through the duct holder. ensions M M Ø 0 00 b h d ension Distance to fixing surface, h d b MDH 0 b d h m , 0 0 0, 0 0 0, , , 0 0 0, , 0 0 0, , , ,0 0 0, 0 0, , , We reserve the right to make changes without prior notice
12 Duct holder MDH b d h m , , , , 00 0, , , , , ,0 Technical data Installation Ventilation system Smoke control system R0 R R0 R R0 00 C 0 min Installation Ventilation system Smoke control system R0 R R0 R R0 00 C 0 min We reserve the right to make changes without prior notice
13 Duct Holder Corner DHC ensions Ø d L A B Description DHC is a duct holder for circular ducts in corners. The holes to attach the duct is adapted to, screws. A B L t m 0 0, 0,0 0, 0,0 0 0, 0,0 code ension DHC We reserve the right to make changes without prior notice
14 Duct Holder Corner DHC Technical data Installation Ventilation system Smoke control system R0 R R0 R R0 00 C 0 min 0 0 We reserve the right to make changes without prior notice
15 Duct Holder Corner Bracket DHCBR ensions Ø, t Description DHCBR is a duct holder for circular ducts in corners with bracket to fix the duct.. UVH, hex head bolts M and nuts M are included. L A A B L t m ,0 0,0 0 0,0,00 0,0, ,0, ,0,0 0 0,0,0 B code ension DHCBR 00 We reserve the right to make changes without prior notice
16 Duct Holder Corner Bracket DHCBR Technical data Installation Ventilation system Smoke control system R0 R R0 R R0 00 C 0 min We reserve the right to make changes without prior notice
17 Suspension rings UV ensions Ø, t 0 Description For suspension of circular ducting. For insulated duct it is recoended that the suspension ring is mounted inside the insulation. code ension UV 00 t m 0 *,0 0, 0 *,0 0, *,0 0, 0 *,0 0, 00 *,0 0, 0 *,0 0, *,0 0, *,0 0, 00 *,0 0, 0 *,0 0, 00 *,0 0, 0 *,0 0, 0 *,0 0,0 Can also be delivered in additional sizes. * can also be delivered in stainless steel 0 Technical data Installation Ventilation system Smoke control system R0 R R0 R R0 00 C 0 min We reserve the right to make changes without prior notice 0
18 Suspension rings UV0 ensions Ø, t Description For suspension of circular ducting. For insulated duct it is recoended that the suspension ring is mounted inside the insulation. code ension UV t m, 0,0 0 *, 0, 0 *, 0, *, 0, 0 *,0 0,0 00 *,0 0, 0 *,0 0,0 *,0 0, 00 *,00 0, 00 *,00 0, 0 *,00 0, 00,00 0, 00,00, 0,00, Can also be delivered in additional sizes. * can also be delivered in stainless steel 0 or aluminiumzink. Technical data Installation Ventilation system Smoke control system R0 R R0 R R0 00 C 0 min We reserve the right to make changes without prior notice
19 Suspension rings UVH ensions Ø, t 0 Description For suspension of circular ducting. For insulated duct it is recoended that the suspension ring is mounted inside the insulation. N.B. Is sold in pairs. code ension Technical data UVH 0 t m 0 *,0 0,0 0 *,0 0,0 *,0 0,0 0 *,0 0,0 00 *,0 0,0 0 *,0 0,0 *,0 0,0,0 0,0 00 *,0 0,0 0,0 0,0 00 *,0 0,0 0,0 0,0 0 *,0 0,0 Can also be delivered in additional sizes. * can also be delivered in stainless steel 0. Installation Ventilation system Smoke control system R0 R R0 R R0 00 C 0 min We reserve the right to make changes without prior notice 0
20 Suspension rings UVH0 ensions Ø, t 0 0 Description For suspension of circular ducting. For insulated duct it is recoended that the suspension ring is mounted inside the insulation. N.B Galvanized UVH0 is sold in pairs, stainless steel and aluminiumzink. UVH0 is sold by piece. The weight in the table are per pair. code ension Technical data UVH0 00 t m 0, 0, 0, 0,, 0, 0,0 0, 00 *,0 0, 0 *,0 0,0 *,0 0, 00 * **,00 0, 00 * **,00 0,0 0 * **,00 0, 00 * **,00, 00 *,00,0 0 *,00, Can also be delivered in additional sizes. * can also be delivered in stainless steel 0. ** can also be delivered in aluminiumzink. Installation Ventilation system Smoke control system R0 R R0 R R0 00 C 0 min We reserve the right to make changes without prior notice
21 Circular suspension DRSN ensions Ø 00 Ø0 0 t t 0 t Description For suspension of circular ducting. Combined connection nut M/M and slotted quick closure for Ø 00. Ø 00 With slotted quick closure. With screw PH M 0. Connection nut M+M. Ø0 0 With Ø hole. With bolt and nut H M 0. Connection nut M+M. t m, 0, 0, 0, 0, 0,, 0, 0, 0, 0, 0, 0, 0,0, 0, 00, 0,, 0, 0, 0, 0, 0, 00, 0,, 0,, 0, 00, 0, 0, 0, 00, 0, 0,,00 00,,0 0,,,, 00,, code ension DRSN 0 00,, 00,, 0,,00 0,,0 We reserve the right to make changes without prior notice 0
22 Circular suspension DRSN Technical data Installation Ventilation system Smoke control system R0 R R0 R R0 00 C 0 min Installation Ventilation system Smoke control system R0 R R0 R R0 00 C 0 min We reserve the right to make changes without prior notice
23 Circular suspension DRSNR ensions Ø 00 t Ø0 0 0 t Description For suspension of circular ducting. With vibration-damping internal rubber lining. Combined connection nut M/M and slotted quick closure for Ø 00. code ension DRSNR 0 Ø 00 With slotted quick closure. With screw PH M 0. Connection nut M+M. Ø0 0 With Ø hole. With bolt and nut H M 0. Connection nut M+M. t m, 0, 0, 0, 0, 0,, 0, 0, 0, 0, 0, 0, 0,, 0,0 00, 0,, 0, 0, 0, 0, 0, 00, 0,0, 0,, 0, 00, 0, 0,,0 00,, 0,, 00,,0 0,,0,,0 00,,0 00,,00 00,,0 0,,0 0,,0 We reserve the right to make changes without prior notice 0
24 Circular suspension DRSNR Technical data Installation Ventilation system Smoke control system R0 R R0 R R0 00 C 0 min Installation Ventilation system Smoke control system R0 R R0 R R0 00 C 0 min We reserve the right to make changes without prior notice
25 Duct holder RK ensions Description Hot dip galvanized duct holder with foot. The ring is joined with two M bolts and nuts. The leg is joined with a M bolt and nut. 00 The foot has four fastening holes. The leg can be removed from the foot and be shortened to desired length. Is delivered assembled Ring material m 0 0,0 0,0 0 0,0 00 0,0 0 0,0 0,0 00 0, ,0 0 0,0 00 0,0 00 0,0 0 0,0 code ension RK 00 We reserve the right to make changes without prior notice 0
26 s Channels and channel brackets CL Cantilever Material: Hot dipped galvanized. To be fixed of walls, floors and ceilings as an assembly profile. 0 0 l 0 m Ø 0 0,0 00 0,0 0 0, 00 0, 00 0, CL 00 CLS Supported cantilever Material: Hot dipped galvanized. To be fixed of walls, floors and ceilings as an assembly profile.the diagonal support bar makes it suitable for heavy loads. a b l 0 a b m , , ,0 00 0,0 00 0, 00 0, CLS 00 Ø We reserve the right to make changes without prior notice
27 s Channels and channel brackets RPA Channel Surface finish: Electro zinc plated. A B SLOT/ PLAI Thickness SLOT SLOT t A c/c 0 B B ension A B Type Thickness RPA SLOT c/c Ø,, B We reserve the right to make changes without prior notice
28 s Channels and channel brackets RPC Channel Surface finish: Electro zinc plated. Available as plain or slotted. A B SLOT/ PLAI Thickness t 000 SLOT, 000 SLOT, 000 SLOT, B 000 SLOT, 000 SLOT, 000 SLOT, A 000 SLOT, 000 SLOT, t =, c/c 0 A t =, ension A B Type Thickness RPC 000 SLOT, B We reserve the right to make changes without prior notice
29 s Channels and channel brackets Channel slide nuts Channel slide nuts and springs are self aligning and are specially manufactured to complement the range of RPC channels. The slide nut can be moved along the channel for ease of alignment whilst the springs tension the nut against the internal channel lips to facilitate installation. In addition to the shape of the slide nuts prevents turning inside the channel eliminating the need to grip the nut whilst inserting bolts or threaded rod. CN Channel nut, without spring Installation Ventilation system Smoke control system R0 00 C 0 min,, 0 ension CNS Channel nut with spring CN Installation Ventilation system Smoke control system ension R0 00 C 0 min,, 0 CNS We reserve the right to make changes without prior notice
30 s Channels and channel brackets CNLS Channel nut long spring Installation Ventilation system Smoke control system R0 00 C 0 min,, 0 ension CNSS Channel nut short spring ension CNLS Installation Ventilation system Smoke control system R0 00 C 0 min,, 0 CNSS We reserve the right to make changes without prior notice
31 s Channels and channel brackets HHB Haer head bolt Installation Ventilation system Smoke control system R0 00 C 0 min,, 0 ension HTS Haer top screw ension HHB 0 Installation Ventilation system Smoke control system R0 00 C 0 min,, 0 HTS 0 We reserve the right to make changes without prior notice
32 s Channels and channel brackets CEC Channel end cap for channel for channel For cannel CEC We reserve the right to make changes without prior notice
33 s Brackets WCL L-fastener Ø l Thickness Material FZB 0 FZB l FZB FZB 0 Installation Ventilationsystem Smoke control system Type R0 R R0 R R0 00 C 0 min WCL code ension WCL WCZ Z-fastener Ø Thickness Material FZB 0 Installation Ventilationsystem Smoke control system Type R0 R R0 R R0 00 C 0 min WCZ code ension WCZ We reserve the right to make changes without prior notice
34 s Brackets WCLT Fastening bracket Surface finish: Electro zinc plated. l Thickness 0, 0, 00, l Ø, ( ) 0 0 Installation Ventilationsystem Smoke control system Type R0 R R0 R R0 00 C 0 min WCLT 0 code ension WCLT 0 We reserve the right to make changes without prior notice
35 s Brackets WCMP MP-fastener For hanging in corrugated sheet metal roofing. The fastener fits wave bottoms of width 0 0. The fastener angle has holes of Ø,, intended for blind rivet or sheet metalscrew B. The fastener can handle a weight of without any deformation code ension VIPPB Toggle For hanging in corrugated sheet metal roofing. 0 code ension WCMP 0 VIPPB We reserve the right to make changes without prior notice
36 Brackets WCRVG ensions º 0, 0 Ø, º, Ø, Ø Description RV suspension profile with shock absorbing rubber For suspension of ventilation ducts with the use of threaded rods and self-drilling screws or blind rivets. Allows fixing against trapeze type ceilings. With a rubber element that prevents transmissions of vibrations. Material:... Galvanized steel Thickness:... WCRVG Technical data Installation Ventilation system Smoke control system R0 R R0 R R0 Type 00 C 0 min WCRVG 0 0 We reserve the right to make changes without prior notice
37 Brackets WCVG ensions 0 Ø ( ) Ø 0 Description V suspension profile with shock absorbing rubber For suspension of ventilation ducts with the use of threaded rods and self-drilling screws or blind rivets. Allows fixing against trapeze type ceilings. With a rubber element that prevents transmissions of vibrations. Material:... Galvanized steel Thickness:... WCVG Technical data Installation Ventilation system Smoke control system R0 R R0 R R0 Type 00 C 0 min WCVG We reserve the right to make changes without prior notice
38 Brackets WCZGM ensions Ø, ( ) Ø Ø, Description Z suspension profile with shock absorbing rubber For suspension of ventilation ducts. Easy height adjustment by using threaded rod and hex nuts. Fixing with blind rivets or self drilling screws. With a rubber element that prevents transmissions of vibrations. Material:... Galvanized steel Thickness:... WCZGM Technical data Installation Ventilation system Smoke control system R0 R R0 R R0 Type 00 C 0 min WCZGM 0 We reserve the right to make changes without prior notice
39 Brackets WCLGM ensions Ø ( ),, Ø Description L suspension profile with shock absorbing rubber 0 Ø For suspension of ventilation ducts. Easy height adjustment by using threaded rod and hex nuts. Fixing with blind rivets or self drilling screws. With a rubber element that prevents transmissions of vibrations. Material:... Galvanized steel Thickness:... WCLGM Technical data Installation Ventilation system Smoke control system R0 R R0 R R0 Type 00 C 0 min WCLGM 0 We reserve the right to make changes without prior notice
40 s Brackets Beam clamp To fix on to beams without welding or drilling. With hexagon head screw DIN., threaded end with cup point according to EN ISO and locknut DIN. Available as threaded (BCT) or not threaded (BC). Material: Body made of malleable cast iron, zinc plated, casting tolerance acc. to DIN GTA /. BCT Threaded rod hole. M M M BC Not threaded rod hole. Installation Ventilationsystem Smoke control system R0 R R0 R R0 00 C 0 min,, 0 ension BCT We reserve the right to make changes without prior notice
41 s Frame support system Stand system Consisting of square tubes and a number of parts which are used to create a range of different structures. This stand system is made up of square tubes in accordance with DIN and materials in accordance with SIS. The load diagram indicates the maximum permissible load with regard to flex sensing and does not take deflection into account. The diagram indicates the maximum permissible load for different distances between the supporting legs without exceeding the limit load in accordance with the Swedish Fatigue Design Code for Welded Structures, StBK-N, static load. This load diagram is applicable to all horizontal tubes with their associated supports, provided that there are no lateral forces Tubes are sendzimir zink plated, FZS, parts are electro zink plated, FZB. Most tubes and parts are also available in hot dipped galvanized steel, FZV. FSZ and FZB complies with the requirements for corrosivity class C, and FZV with C. Square part SSTP Square tube SSR Load, B A c/c for support, m 0,,0,,0,0 0 A = Extended, evenly distributed static load tubes x x, B = Centrically applied static spot load x x, Example Load 0, distributed evenly Stand tube x gives a max c/c between supporting legs of, m 0 We reserve the right to make changes without prior notice
42 s Frame support system SSR Square tube Surface finish: Sendzimir zink plated or hot dipped galvanized steel. Thickness Material, 000 FZS, 000 FZS,0 000 FZV ension Thicknes Material SSR, FZS SSSR Extension piece Surface finish: Electro zinc plated. Thickness SSTP /0 T-piece Surface finish: Electro zinc plated or hot dipped galvanized steel. Material, 000 FZB Angle SSSR Thickness Material,0 FZB 0,0 FZB 0,0 FZB 0,0 FZV ension Angle Material SSTP 0,0 FZB We reserve the right to make changes without prior notice
43 s Frame support system SSF Support foot Surface finish: Electro zinc plated or hot dipped galvanized steel. Thickness Material,0 FZB,0 FZB,0 FZV ension Material SSFA Adjustable foot Surface finish: Electro zinc plated. Thickness SSF FZB Material 0 0,0 FZB SSFA SSH Corner piece Surface finish: Electro zinc plated or hot dipped galvanized steel. Thickness Material,0 FZB,0 FZB,0 FZV ension Material SSH FZB We reserve the right to make changes without prior notice
44 s Frame support system SSMS Cornnecting piece Surface finish: Electro zinc plated. Thickness Material,0 FZB SSB /0 Angle Surface finish: Electro zinc plated or hot dipped galvanized steel. Angle SSMS Thickness Material,0 FZB 0,0 FZB 0,0 FZB 0,0 FZV ension Angle Material SSB 0,0 FZB SSVA Wall attachment Surface finish: Electro zinc plated. Thickness Material,0 FZB,0 FZB ension Material SSVA FZB We reserve the right to make changes without prior notice
45 s SSKV Corner X Surface finish: Electro zinc plated or hot dipped galvanized steel. Thickness Material,0 FZB,0 FZB,0 FZV ension Material SBEI Pipe cover, inside For square tubes, for square parts. Material: Plastic SSKV FZB ension SBEI 0 0 SBEU Pipe cover, outside For square tubes, for square parts. Material: Plastic ension SBEU 0 0 We reserve the right to make changes without prior notice
46 s GMATTA, GKUDDE Anti-vibration mat Plain rubber mat, or thickness with 0 shore, or ribbed mat, designed for vibration damping, thickness with 0 shore. Code GMATTA 0 /cm² GKUDDE 0 /cm² GKUDDE 0 /cm² GKUDDE 0 We reserve the right to make changes without prior notice
Products Catalogue Objective and Structure The company s main objective is the supply of quality products, with respect to: practical design increased durability easy and quick installation reasonable
Dimensions in mm in mm in. R in mm in mm mm. Weight. Dimensions in.
Wall Termination / Universal Blind End 1.950 in. 49.53 mm 0.463 in. 11.76 mm 1.00 in. 25.4 mm 0.75 in. 19.05 mm 9.50 in. 241.3 mm R 0.156 in. 3.962 mm 1.962 in. 49.83 mm 0.367 in. 9.322 mm 0.962 in. 24.43
Ideal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
Mounting Accessory Guide
Apr. 12 2010 Table of Contents Mounting Accessory Guide 1 Overview 5 Introduction... 5 Types of Mounting Methods... 5 Surface... 5 Wall... 5 L-Type Wall Mount (PMAX-0308) 6 Heavy Duty Wall Mounts (PMAX-0305
Product catalogue. Aztec International S.A., ul. Bułgarska 63/65, Poznań, Poland, phone ,
Product catalogue Delivery Programme 2014 Status 02/2014 - Subject to change - Index Rail system... 4 Accessories mounting rails... 11 Rail connectors... 11 Cross connectors... 12 Module clamps... 13 Module
MIRROR POLISHED POSTS See page 46
PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.
11. Wall and Floor Mounted Clips
11. Wall and Floor Mounted Clips The Flamco s BM range of wall mounted clips is designed for installing threaded tubes, sprinkler pipes, thin wall steel tubes and copper pipes. These one piece clips, complete
Reduces installation time Locks tray into position - no hardware required
Tablok Profile Reduces installation time ocks tray into position - no hardware required TabokSystem Drastically reduce installation time with the Tabok profile. Used to mount tray on walls, floors and
XS Roof Type Overview
XS Roof Type Installation Overview XS Linked CABLE system ON STEEL ROOF Rigorous testing has proven the strength and resistance of the XS Linked Cable System on a steel roof. The main components of an
Robust Clamps Shock-proof load range
Robust Clamps Shock-proof load range Your application takes centre stage Robust Clamps Stainless steel Features: Extremly strong Vibration proof Impact and shock load... specific demands require specific
FIXPOINTS PICTORIAL INDEX
Cable Support Systems 149 FIXPOINTS PICTORIA INDEX FASTENERS AND CONNECTORS HN Hexagon Nuts [/] FW Flat Washers [/]. Dia. HN06 HN06H M6 0.15 100 HN08 HN08H M8 0.46 100 HN10 HN10H M10 0.75 100 HN12 HN12H
Parts Manual Kleen Sweep 28 - Model Battery
Parts Manual Kleen Sweep 28 - Model Battery Parts Manual - Kleen Sweep 28 - Model Battery Page 2 Table of Contents Side broom cpl. part 1... Side broom cpl. part 2... Frame - Wheels... Covering MM KS 28B...
WORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp
GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays Model: DS-VWT955-2X2 EXTENSION COLUMN (SOLD SEPARATELY) COMPATIBILITY Display width must be a minimum of 36"
INSTALLATION INSTRUCTIONS
Design and Assembly Envisor components are designed to function as an Equipment Screening System. Modular by Design allows for a more user-friendly installation. This instruction packet is intended to
604 SOCKET HEAD BUTTON SCREWS
600 SOCKET HEAD CAP SCREWS Page........626 634 602 SOCKET SET SCREWS 604 SOCKET HEAD COUNTERSUNK SCREWS 604 SOCKET HEAD BUTTON SCREWS 610 SOCKET HEAD SHOUDER SCREWS Page........635 636 Page........637
Channels and Bracketery
Channels and Bracketery Channel Sections and Cantilever Arms CSS1/ CSS1/ CSS1/ CSS1/ CSS1 CSS1 CS1/ CS1/ CS1/-HDG CS1/-SS CS1/ CS1/ CS1/-HDG CS1/-HDG CS1/-SS CSL1 Material thickness: 1.mm Weight: 1.1 kg/m
Hot dipped, galvanised steel (pre-galvanised) Supplied in 3 metre lengths Return flanged, perforated tray 50MM 75MM 100MM 150MM 225MM 300MM 450MM
Steel Cable Tray Light Duty Cable Tray Medium Duty Tray Hot dipped, galvanised steel (pre-galvanised) Supplied in 3 metre lengths Single flanged, perforated tray Hot dipped, galvanised steel (pre-galvanised)
Flamco Mounting products
M O U N T I N G P R O U C T S 8 Flamco Mounting products K BALL AN HINGE JOINT VG ANGULAR PLATE KCL PROFILE CLAMP GP MOUNTING PLATE BMG ASSEMBLY STRIP Edition 2007 / UK Mounting products The best flexible
North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183
North US 290 US 8 MLK Blvd. FM 969 ASERO Steel Sales Ben White TX IH- US 8 Hot Rolled Strip Commercial Quality A - 0 Size in Per 20 Ft. /8 x /2.2 4.26 /4.9 6.8.42 8.0 /4. 0.62 /2.68 2.6 2.80.00 2 /2.06
Plastra is a trademark of Asya Traffic INC. The products in the catalogue are registered by Turkish Patent Institute.
Plastra is a trademark of Asya Traffic INC. The products in the catalogue are registered by Turkish Patent Institute. 20 2016 TRAFFIC INC. 2016 About Plastra Plastra products are manufactured according
1 5 / 8" 7 /8" 2" 7 /8" 75. 3" 7 /8" 75 Polyurethane HI-TECH Delrin / /16 3/4
For use on wood furniture that can accept a 3 /8" diameter hole approximately 1 5 /8" deep. No.20 pressed steel adapter (Part #50011) with toothed base is supplied. size: 5 /16" diameter x 1 1 /2" long.
180 Olcott St Manchester, CT USA Local Fax Empire Industries, Inc.
EMPIRE I N D U S T R I E S I N C. Empire Industries Inc. is proud to present its new Engineering Catalog, Number 00. This catalog contains a complete line of pipe hangers, supports and related products.
System 16 Precision-Clamping & Welding Bench
UKOP-2.04K16 System 16 Precision-Clamping & Welding Bench System 16 Contents System 16 S4 Welding bench Aluminium Plate with holes Bench legs Stops Squares Prisms Bolts Clamps Fast clamping 2-3 4-5 6-7
AV mounting systems Q4-2009
AV mounting systems Q4-2009 Table of content 1 Table of content 1 SmartMetals projector mounts 2 Universal tube sets 3 Separate tube sets 4 Mirror kit & anti-theft set 5 Universal projector housings 6
SHELVING 45 AND TYRE RACKS
AND TYRE RACKS AND TYRE RACKS Particularly suitable for the storage of heavy and bulky materials (cannot be used as a pallet rack). Made entirely of certified first grade steel sheet and profiled with
Superstrut. Metal Framing. Threaded Products and Hardware. Channel Nuts. Design Data. Screw Threads. Spring Nut Selector Chart
Channel Nuts Superstrut channel nuts are manufactured from Grade 2 mild steel and are case hardened. Data Superstrut self aligning channel nuts are designed to provide resistance to pullout and resistance
Metfab - 7 Ricdanic Drive, BAYSWATER,Vic,3153 Ph:
Mild Steel Flat Mild Steel Flat 10x3 4m Rydal 65x5 6m Flat 13x3 4m Rydal 65x6 6m Flat 13x5 4m Rydal 65x8 6m Flat 16x3 4m Rydal 65x10 6m Flat 16x5 4m Rydal 65x12 6m Flat 16x8 6m Flat 75x5 6m Flat 20x3 6m
060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
Products Catalogue I. Mounting runners and components:
I. Mounting runners and components: 110111-R Mounting runner 40*40 mm M8 slot nut / M10 bolt length: 6.100 mm span width as per statics 110111-N 110112-R Mounting runner 40*40 mm with sideward screw channel
Parts Manual Kleen Sweep 32R Rider Sweeper
Parts Manual Kleen Sweep 32R Page 2 Table of Contents Side broom R.H., part 1... Side broom R.H., part 2... Front wheel drive... Accelerator... Steering... Seat group... Group of main sweeper roller, part
Fits 1 3/4" Resilient Rings. Part # Shaft Height A" 92-A /4" 4.4" 92-A /4" 4.6" Fits 2 1/2" Resilient Rings. Part # Shaft Height A"
Bases 48 Frame Resilient Mount Kit 92-A240 9" Blowers( 2 1/2" Rings) 92-A241 12" Blowers ( 2 1/2" Rings) 92-A242 10" Blowers (2 1/2" Rings) Accessories Base Mounting Adapter Kit For 5 1/2" with flat end
or
Infinite possibilities for your data center The F-Series TeraFrame T M Cabinet System The F-Series TeraFrame Cabinet System from Chatsworth Products, Inc. (CPI) provides configurable thermal management
Weatherproof enclosures for all corrosive environments
IP 66 MRIN INETS N ENLOSURES >>> Marina cabinets polyester - IP 66 - IK 10 www.klinkmann.com Weatherproof enclosures for all corrosive environments 362 56 362 76 Technical characteristics (p. 289) IP 66
Accessories.
7 Accessories 7a 7a 624 630 630 631 Stabil-spindles and half-spindles Solid spindles Fixing accessories RT square spindles 7a 622 FSB Manual 2012 Overview 05 0102 Page 628 05 0103 Page 625 05 0107 05
Emergency stops and Pilot devices
Emergency stops and Pilot devices IMAGES DESIGNATION ARTICLE NUMBER DESCRIPTION INCA INCA 1 Tina 2TLA030054R0000 Emergency stop button for panel mounting, 22.5 mm holes, Tina adaption unit included for
AIR TERMINALS: COPPER
AIR TERMINALS: COPPER A ADAPTER TYPE B LESS ADAPTER LA TYPE A B C A B C A B C 3 8 COPPER POINTS (CLASS I ONLY) 1 2 COPPER POINTS (CLASS I OR II) 5 8 COPPER POINTS (CLASS I OR II) THE 3 8 COPPER AND ALUMINUM
GALVANIZED-COATED SHELFING SYSTEM SHELVING FOR FOOD
ALVANIZED-COATED SHELFIN SYSTEM SHELVIN FOR FOOD ALVANIZED COATED SHELVIN ALVANIZEDRAL 7035 Entirely made of first grade steel and cold-profiled with galvanized steel according to the Sendzimir process
Poly Slide, 40" Sheet 1 of 3
14125200 5 1 / 4 "/133 13 1 / 2 " 343 5 1 / 4 "/133 6'/1829 Minimum Use Zone PLAN VIEW/ FOOTING LAYOUT 26" 660 40" 24" 610 Right Side Frame 72 5 / 8 " 1845 See Dim. "A" 5 1 / 2 "/ 140 Left Side Frame Typical
EcoTec SP tables and base cabinets
Shapes and colours Tabletops and furniture surfaces Table superstructures, base cabinets and handles 30 mm panel with replaceable edge, Antistatic, light grey 30 mm panel with impact-resistant edge band
Wrought Iron Brochure
Wrought Iron Brochure Page 2 Spikes 9211 24mm 125x63mm 9212 26mm 140x70mm 9213 28mm 170x85mm 126/B/6 20mm 80x45mm 126/B/7 25mm 125x64mm 126/B/8 38mm 140x80mm 9543 13mm 133x59mm 9542 14mm 153x70mm 9541
Assembly and Setup Manual
M-11 Series Copyboard/C-11 Series Captureboard Assembly and Setup Manual This is the installation and assembly manual for the M-11 series/c-11 series. To the Customer Specialized techniques are required
ROLLING COUNTER SHUTTERS
500 ROLLING COUNTER SHUTTERS EXCEPTIONAL SECURITY AND AESTHETICS WAYNE DALTON COMMERCIAL DOOR SYSTEMS The Wayne Dalton Rolling Counter Shutter system provides the perfect solution for smaller openings
Full HD Speed Dome IP Camera
Full HD Speed Dome IP Camera Installation Guide Indoor / Outdoor Ver. 1.6 Preface The information given in this manual was current when published. The company reserves the right to revise and improve its
BOLTS & SET SCREWS M6 SET SCREWS & BOLTS M12 SET SCREWS AND BOLTS M8 SET SCREWS AND BOLTS. All the fixings. listed here. are Grade 8.
BOLTS & SET SCREWS Page updated 171120 Flints stocks a wide range of bolts and set screws. The most popular sizes are listed here. Our distributor holds thousands of tons of stock so if you can t find
Required Tools. Ford Transit Connect J4075 with R16 Tracks TRANSIT CONNECT 69 RAIL IBI. Marker. 7/16 / 9/16 / 1/2 Wrench.
IBI Required Tools INSTRUCTION MANUAL Marker 7/16 / 9/16 / 1/2 Wrench Drill with 3/8 Drill Bit Allen Key Ford Transit Connect J075 with R16 Tracks Part # J075 Rails 96 Bars 55 [ ] BLACK WHITE SILVER [
CABLE ROUTING SYSTEMS. WIRE CABLE TRAYS - locking trays PRODUKTINFORMATION
C B L E S N I T T I O N CBLE ROUTING SYSTEMS WIRE CBLE TRYS - locking trays PRODUKTINFORMTION Table of Contents. Locking Cable Trays S20 - S22N, S121-S123.... Pgs 4-5 Locking Cable Trays K25 - K91... Pgs
CLAMPS & SUPPORTS CATALOG
ISO-900:2008 CLAMPS & SUPPORTS CATALOG Phone: 28 96 0900 Fax: 28 96 000 Email: sales@expotechusa.com Web: expotechusa.com 32 Cat. No. Page Cat. No. Page Cat. No. Page 07667... 6 03936... 2 038292... 0
Fixings for Mobile Radio Base Stations
Fixings for Mobile Radio Base Stations Clamps Cleats Accessories Fixings for Mobile Radio Base Stations The Telegärtner Group is now pleased to include cable clamps and cleats to extend its portfolio of
Panel Enclosures. Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet
Panel Enclosures Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge steel (see page 153) All continuous
Technical Data Sheet Screw Clamps and Universal Clamps
Technical Data Sheet Screw Clamps and Universal Clamps Stepless Screw Clamps PG 178 2 PG 178 for small diameters PG 178 for big diameters Bridge Tongue-in-groove design Interlock with multiple diameter
R u b b e r d i s t r i b u t o r
Rubber distributor The modular rubber distributor series We live in a fast-moving time. It is also frequently necessary to make modifications to power distribution systems. Power distributors used in industrial
Firestop Composite Sheet CFS-COS. for Firestop Composite Sheet. Hilti. Outperform. Outlast.
Installation Guide for Firestop Composite Sheet Hilti. Outperform. Outlast. Contents Board Seaming.......... 3 Overlap Seam onto Composite Sheet.......... 3 Butt Seam.......... 4 Flange Seam..........
Slot diffusers, Round duct diffusers IMP Klima 04 Slot diffusers Round duct diffusers 176
B 0 LD- F 9. φ D H H a 8.5 5 5 A E 7 LD- F 8 8.5 9. 5 5 A 7 E LD-/ LD-/ LD- O/ LD- O/ LD- O/ LD- O/.5.5.5.5 LD-/ LD-/ LD-/ LD-/ LD-/ LD-/ 7.5 7.5 07 LD- O/ LD- O/ LD- O/ LD- O/ 5.5 5.5 5.5 5.5 9.5 87.5
Feed Screeners. Model 90 Screener: Model 108 Screener: Model 125 Screener: Manufactured until 3/2002
Back Home FLEX-AUGER Repair Parts Model 90 Screener: 25895 Model 108 Screener: 34347 Model 125 Screener: 25712 Manufactured until 3/2002 25895 34347 25712 25895 34347 25712 Model 90 Model 108 Model 125
nls Product List 1st February, 2014 Tel: Fax: Coombes Drive, Penrith, NSW, 2750 Australia
15 Coombes Drive, Penrith, NSW, 2750 Australia 15 Coombes Drive Penrith NSW 2750 Tel: 02-4732 5444 Fax: 02-4732 6600 Email: sales@nlslight.com.au Product list for Electrical Accessories Code Item Inner
Chapter 5 SHELF STOPPER
Chapter 5 SHELF STOPPER Perforated labels clamp page 70 Super gripper T page 72 Fla g s page 74 The promotions, special offers or price reductions must be always announced at the shelf by visible posting
KM6-II Subracks. APW Electronic Solutions. 152 APW Electronic Solutions Toll Free (800) Fax: (858)
KM6-II Subracks Fully compatible with DIN41494 part 5 and IEC60297-3. KM6-II Standard is available in kit form, offering quick and simple assembly. KM6-II Universal is a highly versatile subrack system,
ANCHORS EARTH HARDWARE POLELINE AERIAL DROP HARDWARE ATTACHMENTS DROP GROUNDING HARDWARE BANDING TOOLS ANCHORS WALL FASTENERS
EARTH ANCHORS POLELINE HARDWARE AERIAL DROP HARDWARE DROP ATTACHMENTS GROUNDING HARDWARE BANDING TOOLS WALL ANCHORS 2009-2010 FASTENERS EA1 Single Solid Square Hub Power Driven Anchor Installation is performed
Further Information can be found at
Below is a step by step guide to assembling the Hurricane-Rig. Remember that this is a precision optical instrument. Excessive force can bend critical parts. If treated well it should give many years of
Section 1 Specialty Profiles
Contents Basic Series 17-31 Section 1 Basic & Specialty Specialty 32x18 Frame 45-46 & End Caps 30 Series 32-35 Door Rolling Door Guide 47 Sliding Door Guide 48 28 Series 36- Panel Stiffener/Handle 49 Panel
Aluminum Telescopic Masts and Accessories
Page 1/6 Aluminum Telescopic Masts and Accessories Example of a 9m aluminum mast with a wind measurement instrument. Model Transport length [m] The telescopic masts are manufactured from sideways slotted
PERFECT HANDLING. PCB Front Panels & Injector/Extractor Handles... Package Your Electronics With Ripac.
Front Panels & Injector/Extractor Handles... PERFECT HANDLING. Package Your Electronics With Ripac. When it comes to electronics, no one handles today s demanding applications better than Rittal Ripac
STANDARD GAGE ACTION CONTENT. 03 Calipers Depth Calipers Micrometers Depth Micrometers Tool Sets Dial Gauges...
STANDARD GAGE ACTION CONTENT 03 Calipers... 09 Depth Calipers... 12 Micrometers... 15 Depth Micrometers... 16 Tool Sets... 17 Dial Gauges... 18 Lever Indicators... 19 Caliper Gauges... 19 Dial Bore Gauges...
robust advanced technology Accessories » for mobile and stationary Ringler suction systems
www.ringler-gmbh.de robust advanced technology Accessories» for mobile and stationary Ringler suction systems Valid from 01.01.2013 Information Dear Customer, This catalog gives you an important selection
STAKE POCKET AND RAIL CLAMP LAYOUT (6302 & 6314) - PAGE 1 B - End 6302 A - End 6302 Centerline of stake pockets
STAKE POCKET AND RAIL CLAMP LAYOUT (6302 & 6314) - PAGE 1 B - End 6302 A - End 6302 Centerline of stake pockets ( Typical D&RGW cast stake pocket) 40 over the end sills 2-11 6-4 9-9 13-2 16-7 20-0 20-0
System 28 Welding and Clamping Table
System 28 Welding and Clamping Table Siegmund System 28 Contents Welding bench S4 Standard Komfort Bench legs Stops Squares Heavy-duty medium and light construction Universal squares Prisms Bolts Clamps
CABLE ROUTING SYSTEMS. WIRE CABLE TRAYS - standard open trays PRODUCT INFORMATION
C L E S N I T T I O N CLE ROUTING SYSTEMS WIRE CLE TRYS - standard open trays PROUCT INFORMTION Table of Contents Open cable trays S25 - S26, S30M - S35W.... Pgs 4-5 Open cable trays S36 - S39W, S30- -
MBE Mounts and Adapters
MBE Mounts and Adapters MBE Series en Installation Guide MBE Mounts and Adapters Table of Contents en 3 Table of Contents 1 Important safety instructions 4 2 MBE Series Mounts and Adapters 6 2.1 Unpacking
MPS-850 e-drum set. assembly instructions
MPS-850 e-drum set assembly instructions Musikhaus Thomann Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 E-mail: info@thomann.de Internet: www.thomann.de 16.10.2018,
Assembly and Setup Manual
M-12 Series Copyboard / C-12 Series Captureboard Assembly and Setup Manual This is the installation and assembly manual for the M-12 series Copyboard and C-12 series Captureboard. (The copyboard and/or
Emergency Luminaire for Fluorescent Lamps Series EXLUX 6009
> As wall, ceiling and pendant light fitting or pole mounted light fitting > Version with 2 lamps: 18 W and 36 W > Central locking > All-pole disconnection via N/C switch when opening light fitting or
ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP
ALPHA Small Distribution Boards SIMBOX 63/SIMBOX WP SIMBOX 63 /4 Introduction /5 Flush mounting distribution boards /6 Hollow-wall distribution boards /7 Surface mounting distribution boards /7 Hood-type
24KO VARIO INSTRUCTION FOR MOBILE PROJECTION SCREENS VARIO 32 AND VARIO 64
24KO VARIO INSTRUCTION FOR MOBILE PROJECTION SCREENS VARIO 32 AND VARIO 64 CENTRE SUPPORT Consists of plug in elements with interlocking and safety bolts. Adaptable to any frame size FOLDABLE LEGS Standard
FLEXBOX. Installation Guide
FLEXBOX Installation Guide FLEXBOX 1 Important Safety Instructions WEIGHT LIMIT MAXIMUM WEIGHT 50 LBS. THE STRUCTURE TO WHICH THE BOX IS MOUNTED (CEIL- ING, WALL, TABLE, POLE) MUST BE ABLE TO SUPPORT FIVE
CABLE TIES AND ACCESSORIES Air Handling Cable Ties
Air Handling Cable Ties Plenum Rated BUrgundy nylon Ideal Application: Air Handling Spaces, above drop ceilings and below raised flooring meets UL 1565 low smoke generation, low heat release, and mechanical
BS EN Class H, BS 7430 UL467 (CR105) Tightening torque 15 Nm mm mm kg CR525
Rod to tape clamp (type A) Nominal rod Max. conductor 1 2 12.7 mm 26 x 12 mm 0.1 kg CR10 8 16 mm 26 x 12 mm 0.1 kg CR10 4 20 mm 26 x 10 mm 0.1 kg CR10 8 16 mm 0 x 2 mm 0.16 kg CR108 4 20 mm 0 x 2 mm 0.16
37 Polished Stainless Steel
80 BAWER 81 82 1,5 mm SERIES BAWER 37 37 Polished Stainless Steel Example of fitting-out Stainless Steel AISI 304/X5CrNi18-10/1.4301-2R Thickness mm 1,5 Mechanical resistance; water resistance Laser and/or
Water Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Water Supply Maintenance Products Section WO 04 Last updated January 2007 CONTENTS SPECIFICATIONS A WO 04-S1A MULTI-PURPOSE UNRESTRAINED
Ultima X5000 Round Duct Mount Kit User Instructions
Ultima X5000 Round Duct Mount Kit User Instructions MSA Kit 10179124/10179321 - Ultima X5000 316 Stainless Steel Parts List / Instructions Round Duct Mount Gasket (1) Round Duct Mount Base Plate (1) Base
Argenta W A L L M O U N T I N G M E T A L C A B I N E T S
Argenta W A L L M O U N T I N G M E T A L C A B I N E T S The ARGENTA Series is a group of metal enclosures used to house on the inside electrical or electronic switchgear, controlgear and equipment necessary
Ultima X5000 Rectangular Duct Mount Kit User Instructions
Ultima X5000 Rectangular Duct Mount Kit User Instructions MSA Kit 10176947 - Ultima X5000 316 Stainless Steel Parts List / Instructions Rectangular Gasket (1) Rectangular Duct Mount Base Plate (1) Base
METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL
METRIC TO OPERATE OVERHEAD VALVES DUCTILE IRON STAINLESS STEEL ALUMINUM CARBON STEEL CHAINWHEELS Page 2 Ductile Iron wheels Sprocket-Type, for use with Single Loop Cut Used to operate overhead valves from
نﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
Service poles for industrial applications
Service poles for industrial applications Ready to go. The ISS basic profile Our industry service poles bundle power, data and compressed air in a compact and robust manner. This means relocations, for
modular enclosure MUREVA, IP65 weatherproof & versatile enclosures aesthetics multi-functional evolutionary ergonomics and time saving security
aesthetics c Elegant and robust design. c Colour easy to integrate in any environment. weatherproof & versatile enclosures multi-functional c Different solutions for: industrial control, electrical distribution,
IS-DM220/IR/HB IS-DM220
IS-DM220/IR/HB IS-DM220 Installation Guide Indoor/Outdoor Ver. 1.2 00P6NX223ZXSEA2 Table of Contents 1. Indoor Camera Installation... 3 1.1 Hard Ceiling... 3 1.2 In-Ceiling (T-Bar) Mounting... 13 1.3 4S
Index. Aluminum. Channel. Coil. Floor Plates. Angles. Flats. Beams. Expanded Metal. Hexagons. Angle Bar Beams Galvanized...
Index Aluminum Angle... 69 Beams... 69 Channel... 69 Color / Painted... 74 Channel Bar... 3 Galvanized... 4 Junior... 4 Structural... 3-4 Expanded Metal... 70 Flats... 71 Pipe... 72 Plates... 73-74 Rounds...
Terminals, Lugs, and Fasteners
Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying
english Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group
english 26 Cable Entry Systems EMC Solutions innovative creative technology Product program A company of the icotek group Customer requests and our constant involvement in ever changing markets is motivation
Frontslide 100/A. Description. Applications. Features of the HAWA-Frontslide 100/A. Patents
Frontslide 100/A Patents Sliding shutters for a functional façade finish. Hardware system for wood, metal or aluminium sliding shutters with a panel weight up to 100 kg (220 lbs.) Guides page 112 Locking
Organisational Kitchen Fittings Drawer and Front Extensions
GRASS NOVA PRO TOUCH LATCH SENSO Application: For drawer and front pull-out Material: Steel, plastic, aluminium Finish: Zinc plated, powder coated Opening version: Full extension with self opening mechanism
SCREENIT A30 A wooden frame filled with A-classed noise absorbing material, pinable and with foam laminated fabric. 40 mm thick.
desk AND FLOOR SCREENS An easy way to create a personal space, even in the most open office landscape. ScreenIT table and floor screens provide protection and privacy against noise while maintaining an
LH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
Forward and reversible plate Hatz Electric start 0 mm Hatz Electric start 0 mm Bio Hatz Electric start mm Bio Valid from serial number 0000 0000 0000 Contents Contents General information.....................................................................................................................................
Pixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com S: 96.524.8242 CAN: 59.885.5775 Product Diversity
A-100G6 - Basic frame assembly diagram
doepfer System A - 100 Rack system A-100 G A-100G6 - Basic frame assembly diagram Parts: 1 Rail with lip, and with tapped hole strip inserted (with M3 threads). 2 Rail with lip, with three M3 hexagon nuts
Temperature Measurement SITRANS TS300
Siemens AG 018 For food, pharmaceuticals and biotechnology modular design Dimensional drawings Cable gland M1x1.5 for cable Ø 3... 6.5 (0.1... 0.6) Ø 60 (.36) Ø d = N + H 1 Ø 50.5 (1.99) U X H 1 N H Ø
Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
Operating Instructions Ceiling Mount Bracket Model No. WV-Q175 WV-Q175E Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use.
GTH. Rectangular double deflection grille QUICK FACTS
Rectangular double deflection grille QUICK FACTS For supply air Adjustable air deflectors Cleanable Installed using mounting frames FHB / FHA or commissioning box TRG Standard colour White RAL 900 -- alternative
Pixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 96.524.8242 CAN: 59.885.5775 Product Diversity