TWISTLOCKS - FLATBED TYPE RETRACTABLE
|
|
- Julianna Garrison
- 6 years ago
- Views:
Transcription
1 3 1/4" 825 MM MODEL Ø4 3/4" 1205 MM 13/16" 20 MM SPLIT ROLL POSITIONER SHOWN IN POSITION FOR LEFT LOCKING /16" 128 MM 7 1/8" 181 MM BALL GUIDE PLATE POSITIONER SHOWN IN POSITION FOR RIGHT LOCKING 3 13/16" 97 MM ALSO AVAILABLE: MODEL OS28 5 1/2" 141 MM 127 MM CAST STEEL AND FORGED STEEL 7 15/16" 202 MM WEIGHT: 135 LBS / 612 Kg MODEL OS70 7 3/16" 183 MM 4 7/16" 113 MM Ø5/8" HOUSE DESIGN SUITABLE FOR FLATBEDS LEFT OR RIGHT LOCKING EASILY CHANGED WITH PATENTED POSITIONER WITH OPTIONAL GRAVITY LATCH ADDED DISTINCT INDEXING OF LOCKED AND UNLOCKED POSITIONS 9 5/8" 244 MM LOCK NUT 5 1/2" 1397 MM WITH 1 1/8" / 28 MM EXTENDED WEIGHT: 136 LBS / 62 Kg 6 7/16" 163 MM WITH 2 3/4" / 70 MM EXTENDED WEIGHT: 141 LBS / 64 Kg sales@buffersusacom
2 Ø4 9/16" 1 SHORT LENGTH MODEL /8" 223 MM SPLIT ROLL /8" 4 1/8" 1048 MM 6 1/4" MM BALL 2 3/4" 693 MM 1275 MM 3 9/16" 903 MM 5/8" WEIGHT: 125 LBS / 56 Kg NON-HANDED DESIGN, LOCKS TO EITHER LEFT OR RIGHT CAST STEEL AND FORGED STEEL ONLY 6 1/4" BELOW DECK IN POSITION FOR EXTRA TIRE CLEARANCE WHERE NEEDED ROUND TOP WITH LARGE WELD CHAMFER FOR DECK TOP INSTALLATION DUAL S LATCH LATCH G SS COTTER FLAT WASHER J LOCK NUT PART NO INNER CONTAINS: BALL SPLIT ROLL S sales@buffersusacom
3 SHORT LENGTH Ø4 3/4" 1205 MM MODEL MM 3 1/4" 825 MM 127 MM THIS VIEW SHOWN WITHOUT LATCH FOR CLARITY 3/4" 19 MM 1 5/16" 33 MM 3 1/16" 78 MM 3/8" 9 MM 3 7/16" 87 MM 5 9/16" MM SPLIT ROLL GUIDE PLATE (FOR LOCKING BOTH LEFT AND RIGHT) SS COTTER FLAT WASHER CLEVIS BALL LATCH LATCH SS COTTER THIS VIEW SHOWN WITHOUT LATCH FOR CLARITY WEIGHT: 129 LBS / 59 Kg DESIGN SUITABLE FOR FLATBEDS LOCKS TO BOTH LEFT AND RIGHT CAST STEEL AND FORGED STEEL ONLY 5 9/16" BELOW DECK IN POSITION FOR EXTRA TIRE CLEARANCE WHERE NEEDED DISTINCT INDEXING OF LOCKED AND UNLOCKED POSITIONS TWISTLOCK LOCKS RIGHT AND LEFT sales@buffersusacom
4 3 1/4" 825 MM MODEL /4" 1205 MM 1 1/16" 27 MM SPLIT ROLL 5 3/8" 1365 MM 7 11/16" 196 MM BALL /16" 97 MM MODEL OS MM 4 11/16" 118 MM Ø5/8" WEIGHT: 162 LBS / 74 Kg DESIGN SUITABLE FOR FLATBEDS LEFT OR RIGHT LOCKING EASILY CHANGED WITH PATENTED POSITIONER CAST STEEL AND FORGED STEEL WITH OPTIONAL GRAVITY LATCH ADDED DISTINCT INDEXING OF LOCKED AND UNLOCKED POSITIONS ALSO AVAILABLE: MODEL OS GUIDE PLATE POSITIONER SHOWN IN POSITION FOR RIGHT LOCKING 6" 153 MM 8 15/16" 7 1/2" 227 MM 188 MM 10 1/4" 262 MM G J LOCK NUT MM WITH 1 3/8" / 35MM EXTENDED WEIGHT: 168 LBS / 762 Kg 1275 MM WITH 2 3/4" / 70MM EXTENDED WEIGHT: 1633 LBS / 741 Kg sales@buffersusacom
5 SCREWDOWN 4 3/4" 1205 MM MODEL RS WEIGHT: 164 LBS / 744 Kg 3 1/4" 825 MM MODEL WRENCH 3 3/16" 975 MM /16" 27 MM 1 7/32" 31 MM 8 3/4" 222 MM 2 5/16" 595 MM 1 1/16" 27 MM 1275 MM 31 MM Ø5/8" 5 7/8" 150 MM 6 1/2" 1645 MM ALSO AVAILABLE: MODEL RS-OS35 WEIGHT: 1685 LBS / 764 Kg 11 3/16" 300 MM 25/64" 10 MM 4 3/4" 1207 MM WORKS WITH: BUFFERS AND RS TWISTLOCKS MATERIAL: CAST STEEL FINISH: HOT DIPPED GALVANIZED (HDG) WEIGHT: 22 LBS / 10 Kg DESIGN SUITABLE FOR FLATBEDS LEFT OR RIGHT LOCKING EASILY CHANGED WITH PATENTED POSITIONER CAST STEEL AND FORGED STEEL WITH OPTIONAL GRAVITY LATCH ADDED DISTINCT INDEXING OF LOCKED AND UNLOCKED POSITIONS MODEL RS-OS70 WEIGHT: 1730 LBS / 785 Kg BALL /16" 185 MM 10 1/8" 257 MM 8 11/16" 220 MM 11 1/2" 257 MM GUIDE PLATE POSITIONER MODEL RS-OS127 WEIGHT: 1805 LBS / 819 Kg MODEL RS-OS152 WEIGHT: 1835 LBS / 832 Kg G NUT J LOCK NUT /8" 277 MM 13 3/4" 349 MM 11 7/8" 302 MM 14 3/4" 374 MM 10/02/ sales@buffersusacom
6 HEIGHT EXTENDER MODEL /32" 150 MM SHOWN IN LOCKED POSITION GRAVITY LATCH KEEPS IN LOCKED POSITION 7" 1778 MM WEIGHT: 435 LBS / 1973 Kg FINISH: HOT DIPPED GALVANIZED 1 13/32" 36 MM 6" 1524 MM THIS APERTURE HOLE SIZED TO FIT EXISTING TWISTLOCKS ON FLATBED 1 3/32" 28 MM 8" /16" 100 MM IMPROVES THE CARGO CARRYING CAPABILITY FOR DOUBLE DROP DECK TRAILERS FITS OVER AND LOCKS ONTO WELDED IN TWISTLOCK ON FLATBED DESIGNED TO BRIDGE THE 6" DIFFERENCE IN DECK HEIGHT FROM THE MAIN DROP LEVEL TO THE LEVEL OVER THE REAR AXLES PORTABLE FOR EASY STORAGE AND TRANSPORT HEAVY DUTY AND GALVANIZED 10/02/ sales@buffersusacom
7 HEIGHT ADJUSTABLE CAN BE USED AS A STANDARD TWISTLOCK ROTATE CLOCKWISE TO EXTEND UPWARD 3 INCHES TO COMPENSATE FOR TRAILER CAMBER CAST STEEL AND FORGED STEEL NON-HANDED DESIGN, LOCKS TO EITHER LEFT OR RIGHT 3 S FOR EASY OPERATION 5 1/2" 6" 6" 7" MODEL HA HEIGHT ADJUSTABLE TWISTLOCK FINISH: PRIMER WEIGHT: 456 LBS / 2068 Kg 12 3/4" DECK LEVEL LOCKED POSITION 9 1/4" 6 1/4" 3" EXTENDED POSITION READY TO LOCK MODEL HA-10 HEIGHT ADJUSTABLE TWISTLOCK WITH EXTENSION TUBE FINISH: PRIMER WEIGHT: 5015 LBS / 2275 Kg MODEL INNER INCLUDES ASSEMBLY WITH DOES NOT INCLUDE ASSEMBLY OR EXTENSION TUBE FINISH: PRIMER WEIGHT: 1645 LBS / 746 Kg 20 1/2" 17 3/4" 14 3/4" MODEL EXTENSION TUBE FINISH: ZINC PLATED WEIGHT: 435 LBS / 197 Kg 8 1/2" DECK LEVEL LOCKED POSITION EXTENDED POSITION READY TO LOCK IMPROVES LOADING AND SECURING CONTAINERS ON FLATBEDS WITH CAMBER DECK LEVEL 3" MAX FULLY LIFT AND TURN TO READY POSITION TURN 90 DEGREES TO LOCK IN POSITION TURN CLOCKWISE TO EXTEND TO DESIRED HEIGHT (MAX 3") TURN 90 DEGREES TO LOCK IN POSITION PATENT PENDING sales@buffersusacom
8 2 15/16" 75 MM 5 7/8" 150 MM 2 15/16" 75 MM MODEL R 2 3/8" 60 MM 5 5/16" 135 MM 2 15/16" 75 MM 1 3/16" 30 MM 4 9/16" /16" 106 MM 9/16" 15 MM 4 9/16" SPLIT ROLL 4 3/4" 121 MM BALL 7 3/16" 183 MM Ø5/8" 1275 MM NON-HANDED DESIGN, LOCKS TO EITHER LEFT OR RIGHT CAST STEEL AND FORGED STEEL SQUARE CORNERS ON TOP PLATE FOR EASY WELD IN STAINLESS STEEL LATCH TO ELIMINATE BOUNCE WEIGHT: 181 LBS / 821 Kg GUIDE PLATE SS COTTER EXTENSION MAY BE ADDED TO THIS MODEL EXTENSION S AVAILABLE: MODEL KIT MODEL KIT MODEL KIT MODEL KIT 3" 4" 6" LATCH LATCH G FLAT WASHER OR LATCH J HEX NUT 3" 76 MM 4" 102 MM 127 MM 6" 152 MM 11/17/ sales@buffersusacom
1 1/3 1105-1129-INNER 7" 7 19/3 SOLD ONLY AS ASSEMBLY. RISER BLOCK, DETENT BALLS, SPRING, GREASE FITTINGS, SPLIT ROLL PIN, HANDLE, AND BOLTS INCLUDED. 5" FITS: BUFFERS 1101-1129 TWISTLOCK, WESTLAKE 60-16
More informationROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.
ROUND BEND U-BOLTS Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2)
More informationInstallation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays
Installation and Assembly: 2 x 2 Video Wall Ceiling Mount for 40" - 55" flat Panel Displays Model: DS-VWT955-2X2 EXTENSION COLUMN (SOLD SEPARATELY) COMPATIBILITY Display width must be a minimum of 36"
More informationROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.
Round Bend s for Steel or Wrought Iron pipe sizes 1/4"-18" clusive, as listed on this and next pages, are produced from low carbon steel and supplied with NC rolled threads and two (2) hex nuts. In addition,
More informationCABLE ROUTING SYSTEMS. WIRE CABLE TRAYS - standard open trays PRODUCT INFORMATION
C L E S N I T T I O N CLE ROUTING SYSTEMS WIRE CLE TRYS - standard open trays PROUCT INFORMTION Table of Contents Open cable trays S25 - S26, S30M - S35W.... Pgs 4-5 Open cable trays S36 - S39W, S30- -
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL DX SERIES SNOW PLOW FOR SERIES SNOW PLOWS SERIAL NUMBERS AFTER DX0000 00 Sno-Way International 0G TABLE OF CONTENTS Page HYDRAULIC SYSTEM (DX)... POWER PACK FRAME... 3 BLADES... LIFT
More informationCABLE ROUTING SYSTEMS. WIRE CABLE TRAYS - locking trays PRODUKTINFORMATION
C B L E S N I T T I O N CBLE ROUTING SYSTEMS WIRE CBLE TRYS - locking trays PRODUKTINFORMTION Table of Contents. Locking Cable Trays S20 - S22N, S121-S123.... Pgs 4-5 Locking Cable Trays K25 - K91... Pgs
More informationOTHER FLAGPOLES 3 Other flagpoles FLAGMORE ACTION / Flagpole 6-2 meters Flagpole for temporary in ground installation. Delivered complete with cleat holes. Cleat holes on,5 m from the bottom or at any
More informationTitan Media Cart. Installation and Operation Manual
Titan Media Cart Installation and Operation Manual Table of Contents INTRODUCTION SERVICE AND SUPPORT... 1 PRODUCT RETURNS... 1 UNPACKING... 1 TITAN SINGLE MEDIA CART... 2 TITAN DUAL MEDIA CART... 2 BEFORE
More informationJuly Manual 10-slide disk outdoor viewer
Ing. J. de Wijs. Populierstraat 44, 4131 AR Vianen, the Netherlands Tel/Fax. +31 (0)347-372242 e-mail: info@dewijs-3d.com Website: www.dewijs-3d.com Design and production of stereoscopic instruments. July
More informationA Frame Flatrack WCI 522 Flush Fit (High Door Access) WCI Corner Casting WCI Corner Casting WCI 151/3. Twistlock.
William Cook Intermodal GOOD IDEAS IN PRACTICE ISO Container A Frame Flatrack WCI 522 Flush Fit (High Door Access) WCI 1231 Shearblock WCI 1232 Cone WCI 1620 Twistlock WCI 1205 Locking Plate WCI 4190 Bail
More informationInstallation Instruction for MT3430 RAM Mounting Kit
Installation Instruction for MT3430 RAM Mounting Kit WARNING: Failure to install the mount correctly or modifications to the mount may result in serious injury or damage to property. Contact Psion Teklogix
More informationAdjust-O Magnet Squares
Adjust-O Magnet Squares The original magnet squares featuring On/Off switches. Patent No. US 7,009,480 B2 Adjust-O Magnet Squares The On/Off switch HEAVY DUTY HEAVY DUTY MSA45 MSA48-HD MSA53-HD Multiple
More informationStainless Steel Hatch Fasteners Page
Izerwaren numbers Stainless Steel Hatch Fasteners Page -4-3-0-0 hatch fasteners, flush type with separate key sea water resistant - leak proof finish: rolled Installation: Drill hole: 22.5 mm Ø / 7/8 Back
More informationSuspension. Suspension
ATTACHING PARTS - APPLICATION CHART ATTACHING PARTS - APPLICATION CHART Note: U-Bolt and Hanger Kits are sold separately and contain all hardware necessary to properly attach springs. Please see pages
More informationserial number A1159T or lower, which includes all manufactured in 2008 Not compatible and not required. Figure 1 Auger Update Sites Call-Outs R B
Installation Instructions 1 Auger Carrier Update ADC2350 Air Carts Used with: ADC2350B General Information These instructions explain how to install an Auger Carrier Update on a pre-2009 pull-behind air
More information1/2
http://partsradar.arinet.com/scripts/empartisapi.dll?mf&app=ariens&session=27f5776d-d5a8-4417-865b-d472735c5bb5&cat=2&assem=4658&imgma 1/2 Ref # Par t # Descr iption Context Note Foot Note Min Qty UOM
More informationReduces installation time Locks tray into position - no hardware required
Tablok Profile Reduces installation time ocks tray into position - no hardware required TabokSystem Drastically reduce installation time with the Tabok profile. Used to mount tray on walls, floors and
More informationCLAMPS & SUPPORTS CATALOG
ISO-900:2008 CLAMPS & SUPPORTS CATALOG Phone: 28 96 0900 Fax: 28 96 000 Email: sales@expotechusa.com Web: expotechusa.com 32 Cat. No. Page Cat. No. Page Cat. No. Page 07667... 6 03936... 2 038292... 0
More information1.8 METER SERIES 1194 ANTENNA SYSTEM
April 20, 2016 REVISION J ASSEMBLY MANUAL 1.8 METER SERIES 1194 ANTENNA SYSTEM General Dynamics SATCOM Technologies 1700 Cable Drive NE Conover NC 28613 USA Phone 770-689-2040 www.gdsatcom.com 1.8 METER
More informationHD NO HOLES MOUNT RAM SSV
HD NO HOLES MOUNT 2015-2019 RAM SSV 425-5107 Remove the two trim covers to access the front OEM bolts of the passenger seat. Remove the front bolts using a 15mm socket. Align the base to the holes, snug
More informationAluminum Telescopic Masts and Accessories
Page 1/6 Aluminum Telescopic Masts and Accessories Example of a 9m aluminum mast with a wind measurement instrument. Model Transport length [m] The telescopic masts are manufactured from sideways slotted
More informationRear-Engine Riders Parts Manual
Rear-Engine Riders Parts Manual Models 06 - RM0 0 - RM0 0 - RM00 0 - RM 06 - RM0 06 - RM0 0 - RM 0 - RM 0 - RM0 0600B /0 Supercedes 0600,A Printed in USA THE MANUAL Before you operate your unit, carefully
More informationInstallation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate
Installation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate The purpose of this guide is to: 1. Describe mounting
More informationHANDLEBAR AND CONTROLS
HANDLEBAR AND CONTROLS Model 80 R, 80 RS, 80 RSE, 80 RSW, 80 BBC, 00 C 80 BBC 80 R, 80 RS, 80 RSE, 80 RSW, 00 C 8 8 0 0 8 0 8 0 0 8 PM00 0 00 00 0 Engine Bail Weldment(80 R, 80 RS, 80 RSE, 80 RSW, 00 C)
More information060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
More informationSECTION FIVE - SANITARY - MANHOLES
Sealtight & 4 Lug Assemblies* ITEM # DESCRIPTION PART # 1 2 3 4 6 7 8 9 10 DUST COVER VENT (not shown) STAINLESS STEEL DUST COVER HINGE PIN (3/ SEALTIGHT) HINGE PIN (/8 4 LUG) STUD (3/ SEALTIGHT) STUD
More information2-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT
2-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT B1 1695 2200 0 10 set by hand or by optional RCU (Remote Control Unit) X 65 2-Port Antenna 1695 2200 65 18dBi 0 10 T Type No. 742215V01
More informationStandard Product. Catalog Number. Width. Depth. mm 18 = = = = = = = = 400
Spec-01195 PROLINE G2 External Components Bases Gland Plate Gland plates are used with a plinth base to provide cable management solutions while maintaining a NEMA 12 rating. PROLINE G2 s unique Duro-Stand
More informationRedexim-Charterhouse Verti-Core 1300/ 1700/ 2100 pag 01 code 0202
Redexim-Charterhouse Verti-Core 1300/ 1700/ 2100 pag 01 code 0202 Part# 1300 Part# 1700 Part# 2100 DESCRIPTION REMARKS QUA 1 844.060.060 Same Same Winged nut - M6 10 2 830.060.060 Same Same Self lock nut
More informationHP STD 33" Cut (S/N ) Page 1 of 15 Drive Assembly
34356 8HP STD 33" Cut (S/N 343561100101-343561199999) Page 1 of 15 Drive Assembly 34356 8HP STD 33" Cut (S/N 343561100101-343561199999) Page 2 of 15 Drive Assembly 1 1 Engine, 8 HP, Recoil Start Order
More informationTurf Parts TILLER PARTS. MOWER PARTS. PERformance
AERATOR PARTS Part # AE10 Tine, lock washer & nut Replaces Aera-Vator AE50-058 (tine) HW32020682P (lock washer), HW20020G5PLF (nut) $5.50 ea. or $4.95 ea. for 90 or more TILLER PARTS Part # AE101 Tine
More information72 Heavy Duty Dual Trim Deck Parts Manual
2 Heavy Duty Dual Trim Deck Parts Manual Hustler Turf Equipment P.O. Box 000 Hesston, Kansas 02-209 02999 Rev 8/0 Table of Contents Chapter General Information.................................... - Chapter
More informationPARTS BOOKLET
00-0-0-0 PARTS BOOKLET 0 EDITION PARTS BREAKDOWNS / INSTALLS PAGE. JACK & TONGUE. VIEWING PLATFORM. TWO SPEED -. SHIFTERS. OIL RESERVOIR -. PLANETARY 0-. DRIVELINE CONFIGURATIONS -. SLIP CLUTCH PAGES.
More information4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT
4-Port Antenna Frequency Range Dual Polarization HPBW Adjust. Electr. DT Y1 1710 2690 1710 2690 0 10 0 10 set by hand or by optional RCU (Remote Control Unit) X Y2 X 65 65 4-Port Antenna 1710 2690/1710
More informationchoice of types to suit many applications, from simple containers, tool boxes, industrial canister type vacuum cleanser, insulation
Solutions Inc. TL-7800 Line The DFCI TL-7800 Line of Toggle Latches offers the designer a wide choice of types to suit many applications, from simple containers, tool boxes, industrial canister type vacuum
More informationTools for Pipe Welding
E L D Tools for Pipe elding ELD-TECH ApS E L D T Clamp L i f e t i m e warranty on broken parts Due to its unique design, T Clamp ensures that the clamping forces are evenly spread round the pipe to be
More informationWORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp
GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated
More informationSCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL
SCHNEIDER OPTICS INC. DISTAR PROJECTOR LENS W/ FOCUS MOUNT INSTRUCTION MANUAL Page INTRODUCTION Thank you for purchasing the Schneider Optics DiStar+HD projector lens. With the Schneider DiStar focus mount,
More informationUS FUTABA. M 19 x 1.25 Ø 8. ESTABLISHED mm. Unlocked Locked LOCKS Door Thickness mm. 18.
ked 38.5 mm 9 M 19 x 1.5 ESTABLISHED 1983 18 mm 3 mm Ø 3.5 4 mm 46 6.7 mm.5 mm 4. mm 6.5 1 Ø 8.65 mm 31 mm 6 mm mm 18.4 mm 17.6 mm Ø Diam Cylind Unlocked 6.7 mm 3 mm 31 5 9 86.8 17 8.5 Locked 4 4 19.5
More informationBall Screw Actuator Models Advantages:
Ball Screw Actuator Models Advantages:! Move loads and apply force more efficiently than other mechanical actuators.! Permit faster operation and longer life under load.! Require less power by providing
More informationDIGITAL Server Rackmount Installation Guide
DIGITAL Server Rackmount Installation Guide Part Number: ER-PCSRA-IA. E01 Digital Equipment Corporation December 1997 The information in this document is subject to change without notice and should not
More information600 Series Databook. HOME MOTION by
600 Series Databook HOME MOTION by Somfy is the leading global manufacturer of strong, intelligent, quiet motors and electronic controls for interior and exterior window coverings with more than 110 million
More informationLift Up Floor Locks Multi-Directional Castor. W Series. M Series (full stainless steel) WHEELS & CASTORS
Lift Up Floor s Multi-Directional Castor K Series M Series O Series M Series (full stainless steel) W Series WHEELS & CASTORS WWW.SITECRAFT.COM.AU WHEELS & CASTORS Lift Up Floor s Used on warehouse trolleys,
More informationUniversal Tablet Enclosure 13 Inch and Under for Microsoft Surface Pro 3 and 4 PN MSPRO4
1-of-9 PRODUCT SPECIFICATIONS PN 80923-MSPRO4 is designed to support the MICROSOFT SURFACE PRO 4 (11.50 x 7.93 x.33) and includes the following items: Universal Tablet Enclosure 13 Inch and Under Assembly
More informationEVOLVE1-M MONITOR ARM
EVOLVE1-M MONITOR ARM EVOLVE1-M Rev A 2/17 Model EVOLVE1-M-SLV Model EVOLVE1-M-BLK Model EVOLVE1-M-WHT ASSEMBLY AND ADJUSTMENT EVOLVE1-M MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before
More informationPowerFlex 750-Series Power Option Cabinets
Installation Instructions PowerFlex 750-Series Power Option Cabinets Topic Page Introduction 1 Additional Resources 2 What the Kits Contain 2 Bus-bar Selection Tables 4 Approximate Dimensions 8 Remove
More informationATV Single Row Disc Harrow OWNER S MANUAL
ATV Single Row Disc Harrow OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationNEW BenchPro Series Multi-Purpose Digital Bench Scale
The BenchPro Series family of digital bench scales is ideal for many diverse industries and markets around the world. As a general purpose scale, the BenchPro offers many benefits, including the ability
More informationPlanar Model A480-PL Professional Grade Home Cinema Conversion Lens System
AKPro system with ATH1 transport shown Planar Model A480-PL Professional Grade Home Cinema Conversion Lens System USER MANUAL AND INSTALLATION GUIDE Including the UH480 Lens, ATH1 Transport and AKPro Projector
More informationAssembling the Christie QwikRig rigging frame
ssembling the hristie QwikRig rigging frame With the hristie QwikRig rigging frame, the projector can be secured to trusses or structures built for the purpose of positioning the projector. With the frame:
More informationFormulate 20 Vertical Curve
Formulate 20 Vertical Curve FMLT-WV20-03 Formulate TM is a collection of sophisticated, ergonomically designed exhibit booths. Formulate combines state-of-the-art zipper pillowcase dye-sublimated fabric
More information14AZ809H063 GTX2446 (2003) Page 1 of 26 Deck Assembly H 46 Inch
14AZ809H063 GTX2446 (2003) Page 1 of 26 Deck Assembly H 46 Inch 14AZ809H063 GTX2446 (2003) Page 2 of 26 Deck Assembly H 46 Inch 1 17982-0637 1 /P Spindle Reinforcement Plate 2 918-0430B 1 S Spindle Assembly,
More informationAMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]
MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page
More informationIdeal protection for your electrics: häwa cable ducts
Ideal protection for your electrics: häwa cable ducts Well Conceived The häwa group has established itself as an innovative and highly competent supplier to machinery and facility equipment companies in
More information1 AM-167/202/242/282/322 Parts Manual. Table Of Contents
AM-167/202/242/282/322 Parts Manual Table Of Contents Mower Beam with Bearings...2 Mower Beam with Bearings...4 Cutting Discs...6 Main Gearbox...8 V-Belt Pulley...10 Headstock...12 Carrier Beam...14 V-Belt
More informationin widespread use with Simplex sister Company, Simplex Onsite, providing nationwide load bank rentals.
600KW - 1250KW Overview Integrated design, load module, trailer, reels, cam-lock style connections, digital control High capacity, 600-1250kw Dual voltage: 208-240/416-480vAC Digital load control, 5 kw
More informationThanks for shopping with Improvements! Chalet Standard Mailbox Item # (With 1 Line Plaque) Item # (With 2 Line Plaque)
Thanks for shopping with Improvements! Chalet Standard Mailbox Item #476200 (With 1 Line Plaque) Item #476242 (With 2 Line Plaque) To order, call 1-800-642-2112 West Chester, OH 45069 Made in China 1014
More informationBolt 1/4"x 2" Grade 2 Zinc , , , Nyloc Hex Nut 5/16" , , ,
Color Logo use on white background only Parts Details LH00, LH000, LH00, LH000, Track Sections & Engines Updated: //0 TIE DOWN ENGINEERING Villanova Drive SW Atlanta, GA 0 www.tiedown.com (0) -0000 Fax
More informationRequired Tools. Ford Transit Connect J4075 with R16 Tracks TRANSIT CONNECT 69 RAIL IBI. Marker. 7/16 / 9/16 / 1/2 Wrench.
IBI Required Tools INSTRUCTION MANUAL Marker 7/16 / 9/16 / 1/2 Wrench Drill with 3/8 Drill Bit Allen Key Ford Transit Connect J075 with R16 Tracks Part # J075 Rails 96 Bars 55 [ ] BLACK WHITE SILVER [
More informationTechnical Data Sheet Screw Clamps and Universal Clamps
Technical Data Sheet Screw Clamps and Universal Clamps Stepless Screw Clamps PG 178 2 PG 178 for small diameters PG 178 for big diameters Bridge Tongue-in-groove design Interlock with multiple diameter
More informationCTT Section Carbon-Fiber Tabletop Tripod. You re on steady ground 1
CTT-1000 3-Section Carbon-Fiber Tabletop Tripod You re on steady ground 1 INTRODUCTION Thank you for choosing Oben! The Oben CTT tripod is a sturdy and high-quality carbon-fiber tabletop tripod that provides
More informationPoly Slide, 40" Sheet 1 of 3
14125200 5 1 / 4 "/133 13 1 / 2 " 343 5 1 / 4 "/133 6'/1829 Minimum Use Zone PLAN VIEW/ FOOTING LAYOUT 26" 660 40" 24" 610 Right Side Frame 72 5 / 8 " 1845 See Dim. "A" 5 1 / 2 "/ 140 Left Side Frame Typical
More information580 RS, 580 RSE, 580 RSW, 600 C. Part s Manual A 3/00 Printed in USA
580 RS, 580 RSE, 580 RSW, 600 C Part s Manual 606 00 0 7A /00 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide
More informationPARTS DESCRIPTION LISTING
PARTS DESCRIPTION LISTING Form 4-157e, 11-09 Sheet 2 of 6 Index No. Part Number Description A 16-889-1 TUBE ASSEMBLY, CAMERA SUPPORT CM (See Sheet 5) B 69-1063-1 COVER, ASSEMBLY BACK DSP600 (See Sheet
More informationHusqvarna X2000E. Illustrated Parts List ConstructionParts.com ConstructionParts.com. ConstructionParts.
Husqvarna X000E Illustrated Parts List -0 0 Jun 00 MAINFRAME ASSEMBLY 0 X000E 000 MAINFRAME ASSEMBLY, X000 000 SHSB, / x / 00 SHAFT, ARBOR LOCK 00 FRAME, ROLL CAGE, X000 0 COVER, BELT GUARD 00 COVER, BELT
More informationPEDESTAL MOUNTS SUPER STRONG MOUNTING SOLUTIONS FOR INSTALLATION OF HEAVIER DEVICES
PEDESTAL MOUNTS SUPER STRONG MOUNTING SOLUTIONS FOR INSTALLATION OF HEAVIER DEVICES PEDESTAL MOUNTS 4 HEAVY DUTY PEDESTAL MOUNTS WITH WINGNUTS 5 HEAVY DUTY PEDESTAL MOUNTS 6 HEAVY DUTY PEDESTAL MOUNTS
More informationT-Nuts St. Industrial Profile Systems Fasteners. Technical Data. Application. Ordering Information. Catalog /US T-Nuts
atalog 1816-3/US St Standard T-nuts conveniently roll into profile T-slots at any location. The spring/ball locking feature keeps the T-nut in place in vertical applications. Standard mounting elements
More informationTerminals, Lugs, and Fasteners
Terminals, Lugs, and Fasteners East Penn cast terminals are manufactured with 100% recycled lead. Lead is recognized as the premium choice in battery cable terminals because of its maximum current carrying
More information4430 PARTS BOOKLET 2015 EDITION PARTS BREAKDOWNS / INSTALLS PAGE DESCRIPTION 8. OIL RESERVOIR INSTALL
0 PARTS BOOKLET 0 EDITION PARTS BREAKDOWNS / INSTALLS PAGE. TONGUE & JACK. VIEWING PLATFORM. PILLOW BLOCK BEARING. TWO SPEED -. SHIFTERS. OIL RESERVOIR INSTALL -. DRIVELINE CONFIGURATIONS -. DRIVESHAFTS.
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 19 20 21 01 07 22 23 13 10 12 08 17 18 11 02 14 15 04 03 16 WELCOME PARTS LIST Thank you for purchasing this HealthPoint Technology Cabinet from Humanscale! Before you begin installing
More informationRack Installation Guide
Rack Installation Guide This document provides important information about the Toolless Slide Rail and the Toolless Slide Rail Kit with 1U/2U MA. Each slide rail kit package contains the following items:
More informationRyobi 12 in. Sliding Compound Miter Saw With Laser Model No. TSS120L Repair Sheet
Ryobi in. Sliding Compound Miter Saw With Laser Model No. TSS0L Repair Sheet 42 3 3 41 43 44 4 4 4 48 4 0 4 40 3 38 33 3 1 32 2 3 32 1 2 1 0 8 31 31 4 3 1 8 34 4 3 30 2 21 22 23 24 2 18 1 28 2 1 14 2 13
More informationParts and Service Manual IMCO
XXTREME ADVANTAGE Gimbal Parts and Service Manual IMCO 510 East Arrow Highway San Dimas, CA 91773 (800) 899-8058 (909) 592-6162 Fax (909) 592-6052 www.imcomarine.com email info@imcomarine.com TABLE OF
More informationInstallation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit
Installation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit The purpose of this guide is to: 1. Describe attachment of Table Top Mount to Mounting Adapter on Arm (page 2). 2.
More informationInstallation Guide Roll Stand Kit for Philips Avalon FM20/30
3875 Cypress Drive Petaluma, CA 94954 800.228.2555 707.773.1100 Fax 707.773.1180 www.gcx.com Installation Guide Roll Stand Kit for Philips Avalon FM20/30 The purpose of this guide is to: 1. Describe attachment
More informationBEAVER TECHNOLOGY SERVICES
BEAVER TECHNOLOGY SERVICES EMPOWERED E E BY INNOVATION N O N CONTENTS CUSTOM FABRICATION ENGINEERING & CONSULTING SERVICES... 2 TRIPODS & ACCESSORIES... 3 HOISTS, DAVITS, CRANES & ACCESSORIES... 4 PORTABLE
More informationSno-Thro. Parts Manual. Models (SS522EC) (SS722EC) (SS522) (SS522EC) (SS722C) /06 Printed in USA
Sno-Thro Parts Manual Models 801 (SSEC) 8018 (SSEC) 801 (SS) 8 (SSEC) 80 (SSC) 0000 /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit.
More informationAlignment. Featuring ProAlign. Software
Alignment Featuring ProAlign Software HawkEye Alignment Featuring ProAlign Software The HawkEye Alignment System featuring ProAlign alignment software functions on a Linux operating system. This unique
More informationANCHORS EARTH HARDWARE POLELINE AERIAL DROP HARDWARE ATTACHMENTS DROP GROUNDING HARDWARE BANDING TOOLS ANCHORS WALL FASTENERS
EARTH ANCHORS POLELINE HARDWARE AERIAL DROP HARDWARE DROP ATTACHMENTS GROUNDING HARDWARE BANDING TOOLS WALL ANCHORS 2009-2010 FASTENERS EA1 Single Solid Square Hub Power Driven Anchor Installation is performed
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL 8 SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER 8D100000 00 Sno-Way International 9100G TABLE OF CONTENTS PAGE DEFLECTORS... POWER PACK... HYDRAULIC POWER UNIT... LIFT CYLINDER... ANGLE
More informationNEW BenchPro Series Multi-Purpose Digital Bench Scale
The BenchPro Series family of digital bench scales is ideal for many diverse industries and markets around the world. As a general purpose scale, the BenchPro offers many benefits, including the ability
More informationFurther Information can be found at
Below is a step by step guide to assembling the Hurricane-Rig. Remember that this is a precision optical instrument. Excessive force can bend critical parts. If treated well it should give many years of
More informationUltra short throw lens installation
Ultra short throw lens installation The ultra short throw lens 0.36 UST GS (P/N: 140-133108-XX) allows you to position your projector as close as possible to your screen or display. Unless otherwise indicated,
More informationRYOBI 10 in. MITER SAW MODEL NO. TSS101L REPAIR SHEET
RYOBI in. MITER SAW MODEL NO. TSS1L REPAIR SHEET 2 1 3 4 9 7 8 13 12 6 14 66 1 16 19 18 20 2 26 71 64 70 28 6 64 0 23 22 21 17 24 63 0 68 73 69 72 0 67 62 61 72 9 8 60 2 6 3 7 4 74 2 0 27 28 29 30 31 32
More informationTEC APO 200 OWNER S MANUAL
TEC APO 200 OWNER S MANUAL 2005 IMPORTANT - PLEASE READ THIS MANUAL BEFORE USING YOUR TELESCOPE SAFETY WARNINGS Do not look at the sun through the telescope! Viewing the sun through the telescope without
More informationInvisible Hinges Page
Finish: Izerwaren Invisible Hinges Page -4-1-1 Seawater Resistant Satin nickel plated MINI INVISIBLE HINGES WITH STAINLESS STEEL PINS invisible hinge for minimum door thickness 1/2 Small Invisible Hinge
More informationRACKS AND CABLE MANAGEMENT
F/ F/ Assemblies, 11.0 W W W. S I E M O N. C O M SECTION CONTENTS RS3 Rack System........ 11.2 11.3 RS3 Series Horizontal Managers........... 11.3 F/ RS Rack System............................. 11.4 Extended
More informationSno-Thro. Parts Manual. Models ST8526LE ST8526LE A 9/04 Printed in USA
Sno-Thro Parts Manual Models 0 - STLE 0 - STLE 0000A /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you
More informationRYOBI 10 in. (254 mm) TABLE SAW - MODEL NO. BTS20
A0 OUTFEED SUPPORT RYOBI in. ( mm) TABLE SAW - MODEL NO. BTS0 FIGURE B: OUTFEED SUPPORT 0 OUTFEED SUPPORT... 0 SCREW (/-0 x / in.)... 00 OUTFEED SUPPORT ROD... 00 STOP SCREW (M X mm)... FIGURE C: BLADE
More informationSection 21. Telecommunication Hardware. BuyLog Catalog 21-1
Introduction...21-1 Fiber Closure Hardware...21-2 Cable Location Surge Protectors...21-4 Introduction GE has been manufacturing Telecommunication Hardware products for over 20 years and has become a leader
More informationPros demand of Tripods, Heads and Support Accessories. And INDURO delivers with a wide and growing range
Tripods, Monopods, Heads and more 2 INDUROGEAR.COM INDURO. ROCK SOLID, NO MATTER WHAT these are the perfect words to define the performance that today s Pros demand of Tripods, Heads and Support Accessories.
More informationMoving-Minds.com Treadmill Desk Operation
LifeSpan Treadmill Desk - Owner s Manual Models DT-5/DT-7 Desk Assembly DT-5 Desk........................................................................................ Assembly Instructions..........................................................................
More informationIn-Sight 7000 Series Vision System. Optional Configurations
In-Sight 7000 Series Vision System Optional Configurations Legal Notices The software described in this document is furnished under license, and may be used or copied only in accordance with the terms
More informationMBE Mounts and Adapters
MBE Mounts and Adapters MBE Series en Installation Guide MBE Mounts and Adapters Table of Contents en 3 Table of Contents 1 Important safety instructions 4 2 MBE Series Mounts and Adapters 6 2.1 Unpacking
More informationCompany, Simplex Onsite, providing nationwide load bank rentals.
Trident 2500 1500KW - 2500KW Overview Integrated design, load module, trailer, reels, cam-lock style connections, digital control Very high capacity, 1500-2500kw Dual voltage: 208-240/416-480vAC Digital
More informationCONCEPT Stainless Steel Wall-Mount Enclosures
CONCEPT Stainless Steel Wall-Mount Finish are unpainted. Door and body have smooth #4 brushed finish. Optional CONCEPT panels are white painted or zinc-plated. Optional NEMA panels are white painted, zinc-plated,
More informationG12/G12x USER S MANUAL
G12/G12x USER S MANUAL TABLE OF CONTENTS SECTION 1 SLIDE CONFIGURATION SECTION 2 SLIDE CONFIGURATION ACCESSORIES SECTION 3 TABLETOP CONFIGURATION SECTION 4 TABLETOP CONFIGURATION ACCESSORIES SECTION 5
More information3M I/O Connector Mounting Options and Hardware
M I/O Connector Mounting Options and Hardware Hardware Guide Date Modified: July 20, 2009 Part Number Type Mounting Hardware Applications - Table 1 Mini D Ribbon (MDR) Conn. s D Sub Conn. s D Ribbon Conn.
More informationCompact Electric Actuators AC and DC Voltages 18 Nm/160 inch lbs
Compact Electric Actuators AC and DC Voltages 18 Nm/160 inch lbs Features Miniature industrial quality quarter turn (90 ) rotation Excellent power to size ratio only 4.6 H x 3 D Type 4X and IP67 weatherproof
More information