Currently Serving Over 60 Countries Worldwide. Ordering from Savillex is Fast Easy Convenient.

Transcription

1

2 urrently Serving Over 60 ountries Worldwide Ordering from Savillex is ast asy onvenient Ordering Options Online Telephone mail ax Mail 6133 aker Road Minnetonka, MN US Ordering Information Payment terms are net 30 days with established credit Savillex accepts Visa, Masterard and merican xpress credit cards Prices are subject to change without notice Prices are.o.. Minnetonka, Minnesota, US ull terms and conditions can be found at

3 Table of ontents bout Savillex orporation Savillex Products Jars Vials Tubes Microcolumns igestion Vessels ilter Holders Impingers Sub-boiling Stills olumn omponents losures Specialty Products rop-in Inserts ishes Sieves/ippers Syringes eakers Tubing ittings Sample Introduction Systems ustom Molded Solutions Modified Products Materials

4 Savillex orporation Savillex orporation has been in the business of manufacturing high-quality fluoropolymer laboratory and custom molded products for over thirty years. Our goal is to remain the leader in high-value advanced P labware, P sample introduction and custom molding solutions at an affordable price. The performance of our products has been demonstrated in applications requiring the highest level of purity and safety. Whenever there is a need to protect the environment from the media, or the media from the environment, an application for our products can be found. Our products are universally accepted in applications ranging from sample collection to analysis and we are proud to serve thousands of customers in over 60 countries around the world. We know our products meet many of your requirements; however, we also understand there are occasional needs for modified or custom products. Please contact us and we will be happy to discuss your specific application and partner with you to produce a product that meets your specific requirements. Note: imensions listed in this catalog are approximate. Please call for exact dimensions. 1 Phone

5 Jars Table of ontents Standard Jars luid Transfer Jars Sealed Jars Jar ccessories

6 Standard Jars luid Transfer Jars....5 Sealed Jars Jar ccessories Jars Standard Jars Jars are molded of P with radiused inside design for easy sample removal Store samples in easily cleaned wide-mouth translucent jars Recessed closures (page 52) and Nomex write-on tabs (page 9) are available for archiving samples Jars with volumes of 60 ml up to 500 ml have a wall thickness of 2.5 mm Jars with volumes of 1000 ml and greater have a wall thickness of 3.0 mm H I Part Number Volume escription iameter x Height ml Jar only 51.0 mm x 44.0 mm 1.99 x ml Jar with 53 mm 59.0 mm x 48.0 mm threaded closure 2.33 x ml Jar with 53 mm 59.0 mm x 48.0 mm recessed closure 2.32 x ml Jar only 51.0 mm x 63.0 mm 1.99 x ml Jar with 53 mm 59.0 mm x 67.0 mm threaded closure 2.33 x ml Jar only 66.0 mm x 50.0 mm 2.61 x ml Jar with 70 mm 76.0 mm x 53.0 mm threaded closure 2.99 x ml Jar only 66.0 mm x 71.0 mm 2.59 x ml Jar only 51.0 mm x mm 1.99 x ml Jar with 53 mm 59.0 mm x mm threaded closure 2.33 x ml Jar with 53 mm 59.0 mm x mm recessed closure 2.32 x ml Jar with 70 mm 76.0 mm x 76.0 mm threaded closure 2.99 x ml Jar only 66.0 mm x 92.0 mm 2.58 x ml Jar with 70 mm 76.0 mm x 96.0 mm threaded closure 2.98 x ml Jar only 85.0 mm x 72.0 mm 3.35 x ml Jar with 89 mm 96.0 mm x 77.0 mm threaded closure 3.79 x ml Jar only mm x 58.0 mm 4.21 x ml Jar with 110 mm mm x 65.0 mm threaded closure 4.68 x ml Jar only 85.0 mm x 84.0 mm 3.34 x 3.29 losures are available separately; see pages Phone

7 Jars Standard Jars luid Transfer Jars....5 Sealed Jars Jar ccessories Standard Jars, continued Knurled closures Stackable Wide mouth easily cleaned 1-1/2 turns Strong, rigid walls our ribbed areas for easy handling Radiused inside design for easy sample removal Primary seal Translucent Seamless design Heat to 500º/250º reeze to -320º/196º G H I Part Number Volume escription iameter x Height ml Jar with 89 mm 96.0 mm x 89.0 mm threaded closure 3.79 x ml Jar only 85.0 mm x mm 3.34 x ml Jar with 89 mm 96.0 mm x mm threaded closure 3.79 x ml Jar only 85.0 mm x mm 3.34 x ml Jar with 89 mm 96.0 mm x mm threaded closure 3.79 x ml Jar with 3/8 O x 7/8 long 85.0 mm x mm drain tube molded at bottom 3.34 x ml Jar only mm x mm 4.23 x ml Jar with 1/2 O x 7/8 long mm x mm drain tube molded at bottom 4.23 x ml Jar with 110 mm mm x mm threaded closure 4.68 x ml Jar only mm x mm 4.23 x ml Jar with 110 mm mm x mm threaded closure 4.68 x ml Jar only mm x mm 4.23 x ml Jar with 110 mm mm x mm threaded closure 4.68 x ml Jar only mm x mm 4.23 x ml Jar with 110 mm mm x mm threaded closure 4.68 x ml Jar only mm x mm 4.23 x ml Jar with 110 mm mm x mm threaded closure 4.68 x Jar bottoms can be machined flat upon request for hot plate heat transfer G 4

8 Standard Jars luid Transfer Jars....5 Sealed Jars Jar ccessories Jars luid Transfer Jars luid transfer jars are molded of P Intended for low pressure transfer Use with stainless steel pressure fixture for higher pressure applications- see page 9 errule nuts are included with each transfer closure errule cap nuts for sealing off ports are available on page 66 luid transfer closures with one, two or three ports have one port that allows tubing to pass through to jar bottom H J luid transfer closures with seven ports allow tubing to pass through at all port locations ll tube ports can be drilled out upon request to allow tubing to pass through G H Part Number Volume escription iameter x Height Ports ccept ml Jar with 53 mm 59.0 mm x 65.0 mm (2) 1/8 O tube fluid transfer closure 2.33 x ml Jar with 53 mm 59.0 mm x 69.0 mm (2) 1/4 O tube fluid transfer closure 2.33 x ml Jar with 53 mm 59.0 mm x 84.0 mm (2) 1/8 O tube fluid transfer closure 2.33 x ml Jar with 53 mm 59.0 mm x 87.0 mm (2) 1/4 O tube fluid transfer closure 2.33 x ml Jar with 70 mm 76.0 mm x 73.0 mm (1) 1/4 O tube fluid transfer closure 2.98 x ml Jar with 70 mm 76.0 mm x 74.0 mm (2) 1/4 O tube fluid transfer closure 2.98 x ml Jar with 53 mm 59.0 mm x mm (2) 1/8 O tube fluid transfer closure 2.33 x ml Jar with 53 mm 59.0 mm x mm (2) 1/4 O tube fluid transfer closure 2.33 x ml Jar with 70 mm 76.0 mm x 94.0 mm (1) 1/4 O tube fluid transfer closure 2.98 x ml Jar with 70 mm 76.0 mm x 95.0 mm (2) 1/4 O tube fluid transfer closure 2.98 x ml Jar with 70 mm 76.0 mm x mm (1) 1/4 O tube fluid transfer closure 2.98 x ml Jar with 70 mm 76.0 mm x mm (2) 1/4 O tube fluid transfer closure 2.98 x ml Jar with 89 mm 96.0 mm x 98.0 mm (2) 1/4 O tube fluid transfer closure 3.79 x ml Jar with 89 mm 96.0 mm x mm (2) 1/4 O tube fluid transfer closure 3.79 x 4.31 G 5 Phone Note: imensions listed in this catalog are approximate. Please call for exact dimensions.

9 Jars Standard Jars luid Transfer Jars....6 Sealed Jars Jar ccessories luid Transfer Jars, continued Part Number Volume escription iameter x Height Ports ccept I J K L M ml Jar with 89 mm 96.0 mm x mm (2) 1/4 O tube fluid transfer closure 3.79 x ml Jar with 89 mm 96.0 mm x mm (2) 1/4 O tube fluid transfer closure 3.79 x ml Jar with 110 mm mm x mm (2) 1/4 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (2) 3/8 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (2) 1/2 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (3) 1/4 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (3) 3/8 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (7) 1/4 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (7) 3/8 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (2) 1/4 O tube fluid transfer closure 4.68 x 6.97 (5) 3/8 O tube ml Jar with 110 mm mm x mm (4) 1/4 O tube fluid transfer closure 4.68 x 6.97 (3) 3/8 O tube ml Jar with 110 mm mm x mm (2) 1/4 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (2) 3/8 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (2) 1/2 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (3) 1/4 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (3) 3/8 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (7) 1/4 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (7) 3/8 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (2) 1/4 O tube fluid transfer closure 4.68 x (5) 3/8 O tube ml Jar with 110 mm mm x mm (4) 1/4 O tube fluid transfer closure 4.68 x (3) 3/8 O tube ml Jar with 110 mm mm x mm (2) 1/4 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (2) 3/8 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (3) 1/4 O tube fluid transfer closure 4.68 x I L K M 6

10 Standard Jars luid Transfer Jars....7 Sealed Jars Jar ccessories Jars luid Transfer Jars, continued Part Number Volume escription iameter x Height Ports ccept N ml Jar with 110 mm mm x mm (2) 1/4 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (2) 3/8 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (2) 1/2 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (3) 1/4 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (3) 3/8 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (7) 1/4 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (7) 3/8 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (2) 1/4 O tube fluid transfer closure 4.68 x (5) 3/8 O tube ml Jar with 110 mm mm x mm (4) 1/4 O tube fluid transfer closure 4.68 x (3) 3/8 O tube ml Jar with 110 mm mm x mm (2) 1/4 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (2) 3/8 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (2) 1/2 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (3) 1/4 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (3) 3/8 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (7) 1/4 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (7) 3/8 O tube fluid transfer closure 4.68 x ml Jar with 110 mm mm x mm (2) 1/4 O tube fluid transfer closure 4.68 x (5) 3/8 O tube ml Jar with 110 mm mm x mm (4) 1/4 O tube fluid transfer closure 4.68 x (3) 3/8 O tube 3000 ml and 4000 ml jars are made by joining jars using an infrared fusion process. small raised bead remains at the outside/inside surfaces of the bonded area. N 7 Phone

11 Jars Standard Jars luid Transfer Jars....5 Sealed Jars Jar ccessories Sealed Jars Sealed jars are molded of P ll sealed jars have two connecting tube ports 10 ml sealed jar has standard integral ferrule nuts Jars with volume of 125 ml or greater have ferrule gripper style nuts Pressure Part Number Volume escription iameter x Height Ports ccept Rating at 100º* ml Sealed jar 27.0 mm x 72.0 mm (2) 1/8 O tube 100 PSI 1.08 x ml Sealed jar 48.0 mm x mm (2) 1/4 O tube 50 PSI 2.07 x ml Sealed jar 88.9 mm x mm (2) 3/8 O tube 25 PSI 3.50 x ml Sealed jar with 3/8 O x 7/8 long 88.9 mm x mm (2) 3/8 O tube 25 PSI drain tube molded at bottom 3.50 x ml Sealed jar mm x mm (2) 1/4 O tube 75 PSI 4.13 x ml Sealed jar with 1/2 O x 7/8 long mm x mm (2) 1/4 O tube 75 PSI drain tube molded at bottom 4.13 x 6.88 *UTION: or every 2º/-17º rise above 100º/38º, reduce pressure rating by 1 PSI. 8

12 Standard Jars luid Transfer Jars....5 Sealed Jars Jar ccessories Jars Jar ccessories Support Screens P screens can be used in jars to hold solid samples in solutions or act as a coarse filter Part Number escription Use With Measurements oncave support screen mm O x 21.0 mm height O x.83 height P screen 82.5 mm O x 3.5 mm thick 3.35 O x.14 thick Nomex Tabs Record important data on tabs of Nomex which can be snapped into recessed closures for jars Nomex is suitable for use in a wide temperature range Nomex tabs are rated to 428º/220º Part Number escription dditional escription Snap-in tabs Packaged in bags of 100 Pressure ixtures Pressure fixtures can be used with wide mouth jars, segmented column components and all containers under 2.50 diameter ixtures have stainless steel end plates, bolts and nuts Part Pressure Rating Number escription Use with at 100º* Pressure fixture 1000 ml fluid transfer jars 75 PSI Pressure fixture 2000 ml fluid transfer jars 75 PSI Pressure fixture 2200 ml fluid transfer jars 75 PSI Pressure fixture 3000 ml fluid transfer jars 35 PSI Pressure fixture 4000 ml fluid transfer jars 35 PSI Pressure fixture Segmented column components 100 PSI *UTION: or every 2º/-17º rise above 100º/38º, reduce pressure rating by 1 PSI. 9 Phone

13 Vials Table of ontents Standard Vials Vials with Trays luid Transfer Vials utosampler Vials Microcentrifuge Vials Vial ccessories

14 Standard Vials Vials with Trays luid Transfer Vials..14 utosampler Vials...15 Microcentrifuge Vials.16 Vial ccessories Vials Standard Vials H J Vials are molded of P Service temperature range of P is -370º/-200º to 500º/260º Recessed closures (pages 50-51)and Nomex write-on tabs (page 17) are available for archiving samples Standard vials have a 2 mm wall thickness lat outside bottom designed for hot plate heat transfer Vials can be autoclaved Part Number Volume escription iameter x Height Vial esign ml Vial only 18.3 mm x 23.1 mm Rounded inside.72" x.91" lat outside bottom ml Vial with 23 mm 24.0 mm x 26.4 mm Rounded inside threaded closure.94" x 1.04" lat outside bottom ml Vial only 23.7 mm x 32.0 mm onical inside.93" x 1.26" in-type bottom ml Vial with 24 mm 27.4 mm x 36.1 mm onical inside threaded closure 1.08" x 1.42" in-type bottom ml Vial with 24 mm 27.4 mm x 36.1 mm onical inside septum closure 1.08" x 1.42" in-type bottom ml Vial only 22.1 mm x 23.6 mm lat inside.87" x.93" Standard outside bottom ml Vial with 24 mm 30.5 mm x 25.4 mm lat inside snap on closure 1.20" x 1.00" Standard outside bottom ml Vial only 18.3 mm x 42.9 mm Rounded inside.72" x 1.69" lat outside bottom ml Vial with 23 mm 24.0 mm x 46.7 mm Rounded inside threaded closure.94" x 1.84" lat outside bottom ml Vial only 23.7 mm x 33.3 mm lat inside.93" x 1.31" Standard outside bottom ml Vial with 24 mm 27.4 mm x 36.6 mm lat inside threaded closure 1.08" x 1.44" Standard outside bottom ml Vial only 22.3 mm x 33.3 mm Rounded inside.93" x 1.31" lat outside bottom ml Vial with 24 mm 27.4 mm x 37.1 mm Rounded inside threaded closure 1.08" x 1.46" lat outside bottom ml Vial with 24 mm 27.4 mm x 37.1 mm Rounded inside septum closure 1.08" x 1.46" lat outside bottom ml Vial with 24 mm 27.4 mm x 38.1 mm lat inside septum closure 1.08" x 1.50" Standard outside bottom ml Vial only 31.8 mm x 37.3 mm lat inside 1.25" x 1.47" Standard outside bottom ml Vial only 31.8 mm x 36.3 mm Rounded inside 1.25" x 1.43" lat outside bottom ml Vial only 31.8 mm x 36.1 mm Rounded inside 1.25" x 1.42" ored outside bottom esigned with more thread engagement for long term sealing. Precision buttress thread. Square outside vial body and hex closure for wrench set torquing. Socket type closure slips over P cap for additional holding in pressure applications. losures are available separately; see pages Phone

15 Vials Standard Vials Vials with Trays luid Transfer Vials..14 utosampler Vials...15 Microcentrifuge Vials.16 Vial ccessories Standard Vials, continued G H I J K Part Number Volume escription iameter x Height Vial esign ml Vial only 31.8 mm x 36.8 mm onical inside 1.25" x 1.45" lat outside bottom ml Vial only 31.8 mm x 36.1 mm onical inside 1.25" x 1.42" ored outside bottom ml Vial with 33 mm 36.6 mm x 42.4 mm lat inside threaded closure 1.44" x 1.67 Standard outside bottom ml Vial with 33 mm 36.6 mm x 42.4 mm lat inside recessed closure 1.44" x 1.67 Standard outside bottom ml Vial with 33 mm 36.6 mm x 42.4 mm lat inside septum closure 1.44" x 1.67 Standard outside bottom ml Vial with 33 mm 36.6 mm x 41.4 mm Rounded inside threaded closure 1.44" x 1.63 lat outside bottom ml Vial with 33 mm 36.6 mm x 41.4 mm Rounded inside threaded closure 1.44" x 1.63" ored outside bottom ml Vial with 33 mm 36.6 mm x 41.4 mm Rounded inside septum closure 1.44" x 1.63" ored outside bottom ml Vial with 33 mm 36.6 mm x 42.0 mm onical inside threaded closure 1.44" x 1.65" lat outside bottom ml Vial with 33 mm 36.6 mm x 41.4 mm onical inside threaded closure 1.44" x 1.63" ored outside bottom ml Vial only 31.8 mm x 52.3 mm lat inside 1.25" x 2.06 Standard outside bottom ml Vial only 31.8 mm x 51.3 mm Rounded inside 1.25" x 2.02" lat outside bottom ml Vial with 33 mm 36.6 mm x 57.2 mm lat inside threaded closure 1.44" x 2.25" Standard outside bottom ml Vial with 33 mm 36.6 mm x 56.4 mm Rounded inside threaded closure 1.44" x 2.22" lat outside bottom ml Vial only 31.8 mm x 66.8 mm lat inside 1.25" x 2.63" Standard outside bottom ml Vial only 31.8 mm x 65.3 mm Rounded inside 1.25" x 2.57" lat outside bottom ml Vial only 31.8 mm x 65.3 mm Rounded inside 1.25" x 2.57" ored outside bottom ml Vial only 31.8 mm x 74.4 mm onical inside 1.25" x 2.93" lat outside bottom ml Vial only 31.8 mm x 73.7 mm onical inside 1.25" x 2.90" ored outside bottom ml Vial with 33 mm 36.6 mm x 71.6 mm lat inside threaded closure 1.44" x 2.82" Standard outside bottom ml Vial with 33 mm 36.6 mm x 71.6 mm lat inside septum closure 1.44" x 2.82" Standard outside bottom ml Vial with 33 mm 36.6 mm x 69.6 mm Rounded inside threaded closure 1.44" x 2.74" lat outside bottom ml Vial with 33 mm 36.6 mm x 69.1 mm Rounded inside threaded closure 1.44" x 2.72" ored outside bottom ml Vial with 33 mm 36.6 mm x 79.2 mm onical inside threaded closure 1.44" x 3.12" lat outside bottom ml Vial with 33 mm 36.6 mm x 77.5 mm onical inside threaded closure 1.44" x 3.05" ored outside bottom ml Vial only 31.8 mm x mm lat inside 1.25" x 5.08" lat outside bottom ml Vial with 33 mm 36.6 cm x mm lat inside threaded closure 1.44" x 5.27" lat outside bottom ml Vial with 33 mm 36.6 cm x mm lat inside septum closure 1.44" x 5.27" lat outside bottom G I K Rounded inside bottom allows for easy removal of entire sample lat outside bottom Standard outside bottom onical inside bottom allows for sample concentration in-type bottom ored outside bottom Note: imensions listed in this catalog are approximate. Please call for exact dimensions. 12

16 Standard Vials Vials with Trays luid Transfer Vials..14 utosampler Vials...15 Microcentrifuge Vials.16 Vial ccessories Vials Vials with Trays Vials are molded of P Service temperature range of P is -370º/-200º to 500º/260º Polypropylene trays offer chemical and heat resistance to 248º/120º Includes one tray, ten vials and two identification cards Ten PT/silicone laminates included with septa vials Vials can be autoclaved Tray dimensions given on page 17 Part Number Volume escription Vial esign ml Vials with 23 mm Rounded inside closures and tray lat outside bottom ml Vials with 24 mm snap- lat inside on closures and tray Standard outside bottom ml Vials with 24 mm onical inside closures and tray in-type bottom ml Vials with 24 mm onical inside septa closures and tray in-type bottom ml Vials with 23 mm Rounded inside closures and tray lat outside bottom ml Vials with 24 mm lat inside closures and tray Standard outside bottom ml Vials with 24 mm lat inside septa closures and tray Standard outside bottom ml Vials with 24 mm Rounded inside closures and tray lat outside bottom ml Vials with 24 mm Rounded inside septa closures and tray lat outside bottom ml Vials with 33 mm lat inside closures and tray Standard outside bottom ml Vials with 33 mm lat inside septa closures and tray Standard outside bottom ml Vials with 33 mm Rounded inside closures and tray lat outside bottom ml Vials with 33 mm Rounded inside closures and tray ored outside bottom ml Vials with 33 mm Rounded inside septa closures and tray ored outside bottom ml Vials with 33 mm onical inside closures and tray lat outside bottom ml Vials with 33 mm lat inside closures and tray Standard outside bottom ml Vials with 33 mm Rounded inside closures and tray ored outside bottom ml Vials with 33 mm lat inside closures and tray Standard outside bottom ml Vials with 33 mm lat inside septa closures and tray Standard outside bottom 13 Phone

17 Vials Standard Vials Vials with Trays luid Transfer Vials..14 utosampler Vials...15 Microcentrifuge Vials.16 Vial ccessories Vials with Trays, continued Part Number Volume escription Vial esign ml Vials with 33 mm Rounded inside closures and tray lat outside bottom ml Vials with 33 mm Rounded inside closures and tray ored outside bottom ml Vials with 33 mm onical inside closures and tray lat outside bottom ml Vials with 33 mm onical inside closures and tray ored outside bottom ml Vials with 33 mm onical inside septa closures and tray ored outside bottom ml Vials with 33 mm lat inside closures and tray lat outside bottom luid Transfer Vials luid transfer vials are molded of P Intended for low pressure transfer Service temperature range of P is -370º/-200º to 500º/260º errule nut included with each transfer closure errule cap nuts for sealing off ports are available on page 66 Upon request, port may be drilled out to allow tubing to pass through to vial bottom Vials can be autoclaved One port per closure Part Number Volume escription iameter x Height Vial esign Port ccepts ml Vial with 24 mm fluid 27.4 mm x 54.1 mm onical inside 1/4 O tube transfer closure 1.08" x 2.13" in-type bottom ml Vial with 24 mm fluid 27.4 mm x 52.8 mm lat inside 1/8 O tube transfer closure 1.08" x 2.08" Standard outside bottom ml Vial with 24 mm fluid 27.4 mm x 55.1 mm lat inside 1/4 O tube transfer closure 1.08" x 2.17" Standard outside bottom ml Vial with 33 mm fluid 36.6 mm x 57.2 mm lat inside 1/8 O tube transfer closure 1.44" x 2.25" Standard outside bottom ml Vial with 33 mm fluid 36.6 mm x 61.7 mm lat inside 1/4 O tube transfer closure 1.44" x 2.43" Standard outside bottom ml Vial with 33 mm fluid 36.6 mm x 72.6 mm lat inside 1/8 O tube transfer closure 1.44" x 2.86" Standard outside bottom ml Vial with 33 mm fluid 36.6 mm x 77.2 mm lat inside 1/4 O tube transfer closure 1.44" x 3.04" Standard outside bottom ml Vial with 33 mm fluid 36.6 mm x 86.4 mm lat inside 1/8 O tube transfer closure 1.44" x 3.40" Standard outside bottom ml Vial with 33 mm fluid 36.6 mm x 91.2 mm lat inside 1/4 O tube transfer closure 1.44" x 3.59" Standard outside bottom 14

18 Standard Vials Vials with Trays luid Transfer Vials..14 utosampler Vials...15 Microcentrifuge Vials.16 Vial ccessories Vials utosampler Vials K L N O P utosampler vials are molded of P Service temperature range of P is -370º/-200º to 500º/260º utosampler vials with conical inside bottoms provide low contamination and low absorption of ultratrace metals for critical analyses rimp top vials accept standard 11 mm crimp caps G H I J K 15 Part Number Volume escription iameter x Height Vial esign ml Vial with 8 mm 12.4 mm x 34.3 mm onical inside threaded closure.49 x 1.35 Threaded top ml Vial with 8 mm 12.4 mm x 34.3 mm onical inside pierceable threaded closure.49 x 1.35 Threaded top ml Vial only 11.4 mm x 32.5 mm onical inside.45" x 1.28" Threaded top ml Vial only 11.4 mm x 32.5 mm onical inside.45" x 1.28" rimp top ml Vial only 7.9 mm x 17.8 mm Ludwig style.31" x.70" ml Vial with 10 mm 10.7 mm x 19.3 mm Ludwig style push-on closure.42" x.76" ml Vial with 8 mm 12.4 mm x 34.3 mm onical inside open septum closure.49 x 1.35 Threaded top ml Vial only 15.7 mm x 23.4 mm Parrish style.62" x.92" ml Vial with 15 mm 16.0 mm x 30.5 mm Parrish style push-on closure.63" x 1.20" ml Vial only 11.4 mm x 32.5 mm Straight inside.45" x 1.28" Threaded top ml Vial only 11.4 mm x 32.5 mm Straight inside.45" x 1.28" rimp top ml Vial with 8 mm 12.4 mm x 34.3 mm Straight inside threaded closure.49 x 1.35 Threaded top ml Vial with 8 mm 12.4 mm x 34.3 mm Straight inside pierceable threaded closure.49 x 1.35 Threaded top ml Vial with 8 mm 12.4 mm x 34.3 mm Straight inside open septum closure.49 x 1.35 Threaded top ml Vial only 14.7 mm x 26.9 mm onical inside.58" x 1.06" Open top ml Vial with 13 mm 14.7 mm x 39.6mm onical inside pick-up knob closure.58" x 1.56" Open top ml Vial only 15.0 mm x 24.0 mm onical inside.59" x.94" Open top ml Vial with 12 mm 16.2 mm x 31.8 mm onical inside push-on closure.64" x 1.25" Open top ml Vial only 15.0 mm x 36.0 mm onical inside.59" x 1.42" Open top ml Vial with 12 mm 16.2 mm x 43.9 mm onical inside push-on closure.64" x 1.73" Open top Phone H I J M losures are available separately; see pages G

19 Vials Standard Vials Vials with Trays luid Transfer Vials..14 utosampler Vials...16 Microcentrifuge Vials.16 Vial ccessories utosampler Vials, continued L M N O P Part Number Volume escription iameter x Height Vial esign ml Vial only 15.0 mm x 52.3 mm onical inside.59" x 2.08" Open top ml Vial with 12 mm 16.2 mm x 61.0 mm onical inside push-on closure.64" x 2.40" Open top ml Vial only 15.2 mm x 50.0 mm lat inside.60" x 1.97" Snap-on top ml Vial with 18 mm 23.1 mm x 51.8 mm lat inside snap-on closure.91" x 2.04" Snap-on top ml Vial only 23.7 mm x 51.8 mm lat inside.93" x 2.04" Threaded top ml Vial with 24 mm 27.4 mm x 55.6 mm lat inside threaded closure 1.08" x 2.19" Threaded top ml Vial only 27.2 mm x 58.9 mm lat inside 1.07" x 2.32" Snap-on top ml Vial with 31 mm 36.8 mm x 61.2 mm lat inside snap-on closure 1.45" x 2.41" Snap-on top Straight Inside Threaded Top Straight Inside rimp Top onical Inside Threaded Top onical Inside rimp Top onical Inside Open Top Microcentrifuge Vials Microcentrifuge vials are molded of P vailable with push-on closures Part Number Volume escription iameter x Height ml Vial only 10.0 mm x 28.4 mm.39" x 1.12" ml Vial with 8 mm 15.7 mm x 30.7 mm push-on closure.62" x 1.21" ml Vial only 12.7 mm x 40.1 mm.50" x 1.58" ml Vial with 11 mm 19.3 mm x 42.4 mm push-on closure.76" x 1.67" 16

20 Standard Vials Vials with Trays luid Transfer Vials..14 utosampler Vials...15 Microcentrifuge Vials.16 Vial ccessories Vials Vial ccessories Heating Jackets Stainless steel jackets increase heat transfer through vial walls when used with hot plates it 15, 22, 30 and 60 ml vials Part Number escription imensions Stainless steel heating jacket 38 mm O x 23 mm height P coated stainless steel heating jacket 38 mm O x 23 mm height Socket ap Socket-type cap is molded of Ultem for extra strength Slips over P closure for additional holding in pressure applications Part Number escription Use With Socket cap Wrench Set Special glass polypropylene wrench set is used to tighten square vial body and hex closure of specialty vials Part Number escription Use With Wrench set Laminates llows vial contents to be totally enclosed by PT while the resealable silicone can be pierced with a syringe 10 laminates per package Part Number escription O PT Thickness Silicone Thickness PT/silicone laminates 24 mm.25 mm 2.3 mm PT/silicone laminates 33 mm.25 mm 2.3 mm PT/silicone laminates 9 mm.25 mm 1.3 mm Support Screens P screens can be used in vial to hold solid samples in solutions or act as a coarse filter Part Number escription Use With Measurements Support screen 15, 22, mm O x 14 mm height and 60 ml vials.96 O x.55 height G Nomex Tabs Record important data on tabs of Nomex which can be snapped into recessed closures for vials Nomex is suitable for use in a wide temperature range Part Number escription dditional escription Snap-in tabs Packaged in bags of 100 Silicone side PT side H I Trays Molded green polypropylene trays have numbered compartments and slots for two identification cards Used for classifying and storage of samples in inert P vials Trays are chemical and heat resistant to 248º/120º Part Number escription Length Width Height Tray mm 82.6 mm 17.8 mm Tray mm 82.6 mm 32.3 mm G I H 17 Phone

21 Tubes Table of ontents Standard Tubes lock igestion Tubes

22 Standard Tubes lock igestion Tubes Tubes Standard Tubes Tubes are molded of P Tubes can be autoclaved P tubes are non-breakable Service temperature range of P is -370º/-200º to 500º/260º G H J K G H I J K Part Number Volume escription iameter x Height Tube esign ml Tube only 12.0 mm x 75.0 mm Rounded inside.47" x 2.95" Open top ml Tube only 17.8 mm x mm Rounded inside.70" x 3.93" Open top ml Tube only 17.8 mm x mm Rounded inside.70" x 3.98" Threaded top ml Tube with 18 mm 21.3 mm x mm Rounded inside plain threaded closure.84" x 4.10" ml Tube only 17.8 mm x mm Rounded inside.70" x 4.31" Threaded top ml Tube only 17.8 mm x mm onical inside.70" x 4.96" Threaded top ml Tube only 16.3 mm x mm onical inside.64" x 4.96" Open top ml Tube with 18 mm 21.3 mm x mm Rounded inside plain threaded closure.84" x 4.43" ml Tube with 18 mm 21.3 mm x mm onical inside plain threaded closure.84" x 5.09" ml Tube only 23.6 mm x mm Rounded inside.93" x 4.43" Threaded top ml Tube with 24 mm 27.4 mm x mm Rounded inside plain threaded closure 1.08" x 4.57" ml Tube only 21.6 mm x mm Rounded inside.85" x 5.90" Threaded top ml Tube with 22 mm 26.2 mm x mm Rounded inside valveless threaded closure 1.03" x 6.04" ml Tube only 31.5 mm x mm Rounded inside 1.24" x 4.68" Threaded top ml Tube only 31.5 mm x mm onical inside 1.24" x 4.55" Threaded top ml Tube with 29 mm 35.8 mm x mm onical inside plain threaded closure 1.41" x 4.70" ml Tube with 29 mm 35.8 mm x mm Rounded inside plain threaded closure 1.41" x 4.83" ml Tube only 26.2 mm x mm Rounded inside 1.03" x 5.68" Open top ml Tube only 27.4 mm x mm Rounded inside 1.08" x 6.49" Threaded top ml Tube with 28 mm 31.8 mm x mm Rounded inside plain threaded closure 1.25" x 6.60" I H 19 Phone

23 Tubes Standard Tubes lock igestion Tubes lock igestion Tubes P tubes designed for use in block digestion systems Thin wall tubes allow maximum heat transfer Threaded tube closures are available on pages Service temperature range of P is -370º/-200º to 500º/260º G I G H I Part Number Volume escription iameter x Height Tube esign ml Tube only 18.3 mm x 42.7 mm Rounded inside.72" x 1.68" Threaded top ml Tube with 23 mm 23.9 mm x 45.9 mm Rounded inside plain threaded closure.94" x 1.81" ml Tube only 31.8 mm x 36.6 mm onical inside 1.25" x 1.44" Threaded top ml Tube with 33 mm 36.5 mm x 41.7 mm onical inside plain threaded closure 1.44" x 1.64" ml Tube only 31.8 mm x 36.1 mm Rounded inside 1.25" x 1.42" Threaded top ml Tube with 33 mm 36.5 mm x 40.9 mm Rounded inside plain threaded closure 1.44" x 1.61" ml Tube only 31.8 mm x 72.9 mm onical inside 1.25" x 2.87" Threaded top ml Tube with 33 mm 36.5 mm x 78.7 mm onical inside plain threaded closure 1.44" x 3.10" ml Tube only 33.5 mm x mm lat inside 1.32" x 4.31" Open top ml Tube only 31.8 mm x mm lat inside, flat outside, 1.25"x 5.08" O, 25 ml and 50 ml graduations ml Tube with 33 mm 36.6 mm x mm lat inside, flat outside, plain threaded closure 1.44" x 5.27" O, 25 ml and 50 ml graduations ml Tube only 33.0 mm x mm lat inside 1.30" x 4.30" with nesting ring ml Tube only 38.1 mm x 98.6 mm lat inside 1.50" x 3.88" Open top ml Tube with 38 mm 38.1 mm x mm lat inside push-in closure 1.50" x 4.09" ml Tube only 48.3 mm x mm lat inside 1.90" x 8.60" Open top H Note: imensions listed in this catalog are approximate. Please call for exact dimensions. 20

24 Microcolumns Table of ontents Standard Microcolumns Microcolumn ccessories

25 Microcolumns Standard Microcolumns Microcolumn ccessories Standard Microcolumns Microcolumns are made of P Used for ion exchange chromatography Long, narrow capillaries optimize the quality of the separation of one element from another Microcolumns can be made from any standard Savillex vial and straight tubing rits not included and can be ordered separately Part Number Volume apillary imensions ml 1.5 mm I x 3.2 mm O x 15 cm long ml 3.2 mm I x 4.7 mm O x 20 cm long ml 2.4 mm I x 4.0 mm O x 15 cm long ml 4.0 mm I x 6.3 mm O x 20 cm long ml 6.4 mm I x 9.6 mm O x 25 cm long ml 14.7 mm I x 17.3 mm O x 12 cm long Microcolumn ccessories rits Part Number escription Thickness G mm diameter frit, PT, 30 micron 2.5 mm H mm diameter frit, PT, 30 micron 2.5 mm I J mm diameter frit, PT, 30 micron 2.5 mm mm diameter frit, PT, 30 micron 2.5 mm G I H J K K mm diameter frit, PT, 30 micron 8.4 mm mm diameter frit, PT, 30 micron 1.6 mm losures for Microcolumns can be found on pages

26 igestion Vessels Table of ontents igestion Vessels igestion Vessel ccessories

27 igestion Vessels igestion Vessels...24 igestion Vessel ccessories igestion Vessels P digestion vessels are used for rapid sample dissolution Vessels can be placed directly in a microwave oven for controlled high speed heating to drastically reduce time required to dissolve or digest an analytical sample Vessels can be supplied with flat outside bottoms for hot plate heating and digestion Glass polypropylene wrench set (# ) is recommended for tightening losure Pressure Part Number Volume escription iameter x Height Vessel esign Port esign Rating at 100º* ml Vessel only 53.8 mm x 57.4 mm lat inside - - buttress threaded 2.12" x 2.26" Standard outside ml Vessel only 53.8 mm x 53.6 mm lat inside - - buttress threaded 2.12" x 2.11" lat outside ml Vessel only 53.8 mm x 57.4 mm onical inside - - buttress threaded 2.12" x 2.26" ored outside ml Vessel with plain 58.2 mm x 65.0 mm lat inside - 75 PSI buttress threaded closure 2.29" x 2.56" Standard outside ml Vessel with buttress 58.2 mm x 82.3 mm lat inside (2) 1/8 ports 75 PSI threaded transfer closure 2.29" x 3.24" Standard outside ml Vessel with 58.2 mm x mm lat inside Pressure relief valve 100 PSI buttress threaded closure 2.29" x 4.05" Standard outside ml Vessel with plain 58.2 mm x 62.0 mm lat inside - 75 PSI buttress threaded closure 2.29" x 2.44" lat outside ml Vessel only 53.6 mm x mm lat inside - - buttress threaded 2.11" x 4.56" Standard outside ml Vessel only 53.6 mm x mm lat inside - - buttress threaded 2.11" x 4.43" lat outside ml Vessel only 53.6 mm x mm onical inside - - buttress threaded 2.11" x 4.56" ored outside ml Vessel only 53.6 mm x mm lat inside buttress threaded 2.11" x 4.56" Standard outside - - (1) 1/4 NPT side port ml Vessel only 53.6 mm x mm lat inside buttress threaded 2.11" x 4.56" Standard outside - - (2) 1/8 side ports ml Vessel only 53.6 mm x mm lat inside buttress threaded 2.11" x 4.56" Standard outside - - (2) 1/4 side ports *UTION: or every 2º/-17º rise above 100º/38º, reduce pressure rating by 1 PSI. The pressurized digestion process can produce extremely high sample temperatures and pressures in a very short period of time, especially when performed in a microwave. Observe all instructions and safety precautions as noted in marketing bulletin #M

28 igestion Vessels...25 igestion Vessel ccessories igestion Vessels G H I J igestion Vessels, continued losure Pressure Part Number Volume escription iameter x Height Vessel esign Port esign Rating at 100º* ml Vessel with plain 58.2 mm x mm lat inside - 75 PSI buttress threaded closure 2.29" x 4.80" Standard outside ml Vessel with buttress 58.2 mm x mm lat inside (1) 1/4 O port 75 PSI threaded transfer closure 2.29" x 5.57" Standard outside ml Vessel with buttress 58.2 mm x mm lat inside (2) 1/8 O ports 75 PSI threaded transfer closure 2.29" x 5.44" Standard outside ml Vessel with buttress 58.2 mm x mm lat inside (2) 1/4 O ports 75 PSI threaded transfer closure 2.29" x 5.59" Standard outside ml Vessel with 58.2 mm x mm lat inside Pressure relief valve 100 PSI buttress threaded closure 2.29" x 6.34" Standard outside ml Vessel with 1-1/ mm x mm lat inside Pressure relief valve, 125 PSI NPT threaded closure 2.29" x 6.32" Standard outside Ultem clamp ml Vessel with plain 58.2 mm x mm lat inside - 75 PSI buttress threaded closure 2.29" x 4.73" lat outside ml Vessel with 1-1/ mm x mm lat inside Pressure relief valve, 125 PSI NPT threaded closure 2.29" x 6.32" Standard outside Ultem clamp (1) 1/8 side port *UTION: or every 2º/-17º rise above 100º/38º, reduce pressure rating by 1 PSI. G H I J igestion Vessel ccessories Part Number escription Glass polypropylene wrench set /16 O flexible P tubing or technical assistance, we recommend two books published by the merican hemical Society. oth books contain numerous references to P vessels molded by Savillex orporation. Please visit and do a search for the books listed below. Microwave-nhanced hemistry: undamentals, Sample Preparation and pplications S Professional Reference ook Series, merican hemical Society, Washington,, dited by H.M. Skip Kingston and Stephen Haswell. Introduction to Microwave Sample Preparation,Theory and Practice S Professional Reference ook Series, merican hemical Society, Washington,, dited by H.M. Skip Kingston and Lois. Jassie. 25 Phone

29 ilter Holders Table of ontents Single Stage ilter Holders Multiple Stage ilter Holders.. 30 ilter Holder omponents ilter Holder Membranes ilter Holder low Rates ilter Holder ccessories

30 Single Stage ilter Holders Multiple Stage ilter Holders ilter Holder omponents ilter Holder Membranes ilter Holder ccessories ilter Holders Single Stage ilter Holders 13 mm iameter Two-piece design esigned for use with syringe # (see page 60) i-directional membrane support an be hand tightened; no wrench needed ll filter holder components in contact with the fluid stream are molded of P Membranes may be changed without disconnecting tube lines or every 2º/-17º temperature rise above 150º/66º, decrease pressure rating by 1 PSI Membrane Part Number escription Inlet Type iameter Outlet Type iameter x Length Single stage emale leur lock 13 mm Male leur slip 26.0 mm x 28.2 mm 1.03 x mm iameter ll components contacting fluid stream are molded P Membranes may be changed without disconnecting tubing lines an be hand tightened; no wrench needed P clamps are available for high temperature applications or every 2º/-17º temperature rise above 150º/66º, decrease pressure rating by 1 PSI Membrane lamp Pressure Part Number escription Inlet Type iameter Style Outlet Type Rating iameter x Length Single stage 2-1/2 25 mm White/blue 1/8 O 65 PSI 38 mm x 62 mm open inlet PV ferrule nut outlet 1.50 x Single stage 2-1/2 25 mm White/blue 1/4 O 65 PSI 38 mm x 62 mm open inlet PV ferrule nut outlet 1.50 x Single stage 1/8 O 25 mm White/blue 1/8 O 65 PSI 38 mm x 62 mm ferrule nut inlet PV ferrule nut outlet 1.50 x Single stage 1/4 O 25 mm White/blue 1/4 O 65 PSI 38 mm x 62 mm ferrule nut inlet PV ferrule nut outlet 1.50 x Single stage 1/4 O 25 mm White/blue 1/4 O 65 PSI 38 mm x 62 mm MNPT inlet PV MNPT outlet 1.50 x 2.45 Note: imensions listed in this catalog are approximate. Please call for exact dimensions. Other filter holder assemblies can be built by using components listed on pages Phone

31 ilter Holders Single Stage ilter Holders Multiple Stage ilter Holders ilter Holder omponents ilter Holder Membranes ilter Holder ccessories Single Stage ilter Holders, continued 47 mm iameter vailable with or without polypropylene wrench set Glass polypropylene wrench set recommended with initial order for tightening P clamp nuts for use in high temperature applications Tefzel clamp reinforced with 25% glass fiber for use in high pressure applications Maximum temperature for Tefzel is 300º/148º ll filter holder components in contact with the fluid stream are molded of P Membranes may be changed without disconnecting tube lines or every 2º/-17º temperature rise above 150º/66º, decrease pressure rating by 1 PSI Part Number Part Number Membrane lamp Pressure with Wrench Set without Wrench Set escription Inlet Type iameter Style Outlet Type Rating iameter x Length Single stage 1-1/2 47 mm Orange 1/4 O 25 PSI 62.0 mm x 73.4 mm open inlet P ferrule nut outlet 2.44 x Single stage 1/4 O 47 mm Orange 1/4 O 25 PSI 62.0 mm x 94.8 mm ferrule nut inlet P ferrule nut outlet 2.44 x Single stage 1/4 O 47 mm lack 1/4 O 65 PSI 61.2 mm x 94.0 mm ferrule nut inlet Tefzel ferrule nut outlet 2.41 x Single stage 1/4 O 47 mm lack 1/4 O x 65 PSI 61.2 mm x mm ferrule nut inlet Tefzel 1 tube outlet 2.41 x Single stage 3/8 O 47 mm Orange 1/4 O 25 PSI 62.0 mm x 98.8 mm ferrule nut inlet P ferrule nut outlet 2.44 x Single stage 3/8 O 47 mm Orange 3/8 O 25 PSI 62.0 mm x mm ferrule nut inlet P ferrule nut outlet 2.44 x Single stage 3/8 O 47 mm lack 3/8 O 65 PSI 61.2 mm x mm ferrule nut inlet Tefzel ferrule nut outlet 2.41 x Single stage 3/8 O 47 mm lack 3/8 O x 65 PSI 61.2 mm x mm ferrule nut inlet Tefzel 1 tube outlet 2.41 x Single stage 1/4 O 47 mm Orange 1/4 O 25 PSI 62.0 mm x 78.0 mm MNPT inlet P MNPT outlet 2.44 x Single stage 3/8 O x 47 mm Orange 1/4 O 25 PSI 62.0 mm x 98.1 mm 1 tube inlet P ferrule nut outlet 2.44 x Single stage 3/8 O x 47 mm Orange 3/8 O x 25 PSI 62.0 mm x mm 1 tube inlet P 1 tube outlet 2.44 x Single stage 3/8 O x 47 mm lack 1/4 O 65 PSI 61.2 mm x 98.3 mm 1 tube inlet Tefzel ferrule nut outlet 2.41 x Single stage 1/4 O 47 mm xtended 1/4 O x 25 PSI 62.0 mm x mm ferrule nut inlet Gray P 1 tube outlet 2.44 x

32 Single Stage ilter Holders Multiple Stage ilter Holders ilter Holder omponents ilter Holder Membranes ilter Holder ccessories ilter Holders Single Stage ilter Holders, continued 50 mm iameter vailable with or without polypropylene wrench set Glass polypropylene wrench set recommended with initial order for tightening P clamps for use in high temperature applications Tefzel clamp reinforced with 25% glass fiber for use in high pressure applications Maximum temperature for Tefzel is 300º/148º ll filter holder components in contact with the fluid stream are molded of P Membranes may be changed without disconnecting tube lines or every 2º/-17º temperature rise above 150º/66º, decrease pressure rating by 1 PSI Part Number Part Number Membrane lamp Pressure with Wrench Set without Wrench Set escription Inlet Type iameter Style Outlet Type Rating iameter x Length Single stage 1-1/2 50 mm Green 1/4 O 25 PSI 62.0 mm x 73.4 mm open inlet P ferrule nut outlet 2.44 x Single stage 1/4 O 50 mm Green 1/4 O 25 PSI 62.0 mm x 94.0 mm ferrule nut inlet P ferrule nut outlet 2.44 x Single stage 1/4 O 50 mm rown 1/4 O 65 PSI 61.2 mm x 94.5 mm ferrule nut inlet Tefzel ferrule nut outlet 2.41 x Single stage 3/8 O 50 mm Green 3/8 O 25 PSI 61.2 mm x mm ferrule nut inlet P ferrule nut outlet 2.41 x Single stage 3/8 O 50 mm rown 3/8 O 65 PSI 61.2 mm x mm ferrule nut inlet Tefzel ferrule nut outlet 2.41 x Single stage 3/8 O 50 mm rown 3/8 O x 65 PSI 61.2 mm x mm ferrule nut inlet Tefzel 1 tube outlet 2.41 x Single stage 3/8 O x 50 mm Green 3/8 O 25 PSI 62.0 mm x 97.8 mm 1 tube inlet P ferrule nut outlet 2.44 x Single stage 3/8 O x 50 mm Green 3/8 O x 25 PSI 62.0 mm x mm 1 tube inlet P 1 tube outlet 2.44 x Single stage 3/8 O x 50 mm rown 1/4 O 65 PSI 61.2 mm x 97.8 mm 1 tube inlet Tefzel ferrule nut outlet 2.41 x Single stage 1/2 O x 50 mm Green 3/8 O x 25 PSI 62.0 mm x mm 1 tube inlet P 1 tube outlet 2.44 x Single stage 1/2 O x 50 mm Green 1/2 O x 25 PSI 62.0 mm x mm 1 tube inlet P 1 tube outlet 2.44 x Single stage 1/2 O x 50 mm rown 1/2 O x 65 PSI 61.2 mm x mm 1 tube inlet Tefzel 1 tube outlet 2.41 x mm iameter vailable with or without polypropylene wrench set Glass polypropylene wrench set recommended with initial order for tightening Maximum service temperature 275º/135º ll filter holder components in contact with the fluid stream are molded of P Membranes may be changed without disconnecting tube lines or every 2º/-17º temperature rise above 150º/66º, decrease pressure rating by 1 PSI Part Number Part Number Membrane lamp Pressure with Wrench Set without Wrench Set escription Inlet Type iameter Style Outlet Type Rating iameter x Length Single stage 1-1/2 90 mm Ultem 1/2 O 10 PSI mm x 94.7 mm open inlet ferrule nut outlet 4.33 x Single stage 1/2 O 90 mm Ultem 1/2 O 10 PSI mm x mm ferrule nut inlet ferrule nut outlet 4.33 x Single stage 3/4 O 90 mm Ultem 3/4 O 10 PSI mm x mm ferrule nut inlet ferrule nut outlet 4.33 x Single stage 1/2 O x 90 mm Ultem 1/2 O x 10 PSI mm x mm 1 tube inlet 1 tube outlet 4.33 x Single stage 5/8 O x 90 mm Ultem 5/8 O x 10 PSI mm x mm 1 tube inlet 1 tube outlet 4.33 x Phone Other filter holder assemblies can be built by using components listed on pages 31-34

33 ilter Holders Single Stage ilter Holders Multiple Stage ilter Holders ilter Holder omponents ilter Holder Membranes ilter Holder ccessories Multiple Stage ilter Holders In-line filter holder components in contact with the fluid stream are molded of P xtended clamps and additional support rings with snap-in grids combine to create two, three and four stage filter holder assemblies Using membranes with differing pore sizes allows filtration of sample from extra coarse to ultra fine particles Glass polypropylene wrench set recommended with initial order for tightening or every 2º/-17º temperature rise above 150º/66º, decrease pressure rating by 1 PSI Part Number Part Number Membrane lamp Pressure with Wrench Set without Wrench Set escription Inlet Type iameter Style Outlet Type Rating iameter x Length Two stage 3/8 O x 47 mm extended 3/8 O x 25 PSI 62.0 mm x mm 1 tube inlet gray P 1 tube outlet 2.44 x Two stage 1/4 O 47 mm extended 1/4 O MNPT 25 PSI 62.0 mm x 83.1 mm MNPT fitting inlet gray P fitting outlet 2.44 x Three stage 1-1/2 47 mm extended 1/4 O 25 PSI 62.0 mm x 84.5 mm open inlet gray P ferrule nut outlet 2.44 x Three stage 3/8 O x 47 mm extended 3/8 O x 25 PSI 62.0 mm x mm 1 tube inlet gray P 1 tube outlet 2.44 x Three stage 3/8 O 47 mm extended 3/8 O 25 PSI 62.0 mm x mm ferrule nut inlet gray P ferrule nut outlet 2.44 x our stage 1-1/2 47 mm extended 1/4 O 25 PSI 62.0 mm x 89.2 mm open inlet gray P ferrule nut outlet 2.44 x 3.51 Inlet Membrane Membrane Membrane lamp Grid Grid Grid Support Ring Support Ring Outlet 30

34 Single Stage ilter Holders Multiple Stage ilter Holders ilter Holder omponents ilter Holder Membranes ilter Holder ccessories ilter Holders omponents ilter holder components may be ordered as spare parts or to build multiple stage filter holders Inlet Membrane Membrane Membrane Grid Support Ring Grid Support Ring Grid Outlet lamp Inlets Inlets are molded of P and are available in various styles for different applications Part Membrane Number Inlet Type iameter /2 open inlet 25 mm errule nut for 1/8 tubing 25 mm errule nut for 1/4 tubing 25 mm /4 O MNPT fitting 25 mm /2 open inlet 47 mm /2 open inlet 47 mm errule nut for 1/4 tubing 47 mm errule nut for 3/8 tubing 47 mm /4 O MNPT fitting 47 mm /4 O x 1 tube 47 mm /8 O x 1 tube 47 mm /2 O x 1 tube 47 mm /8 O x 1 tube 47 mm /2 open inlet 50 mm errule nut for 1/4 tubing 50 mm errule nut for 3/8 tubing 50 mm /4 O MNPT fitting 50 mm /8 O x 1 tube 50 mm /2 O x 1 tube 50 mm /2 open inlet 90 mm errule nut for 1/2 tubing 90 mm errule nut for 3/4 tubing 90 mm /2 O x 1 tube 90 mm /8 O x 1 tube 90 mm Support Rings Support ring is molded of P Up to three units can be added to a standard filter holder to build a multiple stage filter holder Grids must be ordered separately Part Number Product escription Use With mm filter support ring ilter holders Grid must be ordered separately 31 Phone

35 ilter Holders Single Stage ilter Holders Multiple Stage ilter Holders ilter Holder omponents ilter Holder Membranes ilter Holder ccessories omponents, continued G Grids P grids snap into the support ring or outlets to hold filter membrane Part Number Size Use With mm 25 mm filter holders mm 47 and 50 mm filter holders mm 90 mm filter holders G lamps lamps are available in various sizes and materials for specific applications xtended clamp is also available for building a multiple stage filter holder P clamps withstand a wide temperature range in addition to other P properties Tefzel clamps are reinforced with 25% glass fiber for use in higher pressure applications Ultem clamps provide extra strength for 90 mm filter holders or every 2º/-17º temperature rise above 150º/66º, decrease pressure rating by 1 PSI Pressure Part Number lamp Type iameter Rating White and lue PV 25 mm 65 PSI White PV 25 mm 65 PSI lue PV 25 mm 65 PSI H Orange P 47 mm 25 PSI Orange P, extended 47 mm 25 PSI Green P, extended 47 mm 25 PSI J I Gray P, extended 47 mm 25 PSI Yellow P, extended 47 mm 25 PSI lack Tefzel 47 mm 65 PSI J Green P 50 mm 25 PSI rown Tefzel 50 mm 65 PSI Ultem 90 mm 10 PSI I H K L M Outlets Outlets are molded of P and are available in various styles for different applications Grids must be ordered separately Part Membrane Number Inlet Type iameter errule nut for 1/8 O tubing 25 mm errule nut for 1/4 O tubing 25 mm /4 MNPT fitting 25 mm errule nut for 1/4 O tubing 47 mm errule nut for 3/8 O tubing 47 mm /4 MNPT fitting 47 mm /4 O x 1 tube 47 mm /8 O x 1 tube 47 mm /2 O x 1 tube 47 mm /8 O x 1 tube 47 mm errule nut for 1/4 O tubing 50 mm errule nut for 3/8 O tubing 50 mm /4 MNPT fitting 50 mm /8 O x 1 tube 50 mm /2 O x 1 tube 50 mm errule nut for 1/2 O tubing 90 mm errule nut for 3/4 O tubing 90 mm /2 O x 1 tube 90 mm /8 O x 1 tube 90 mm K L M 32

36 Single Stage ilter Holders Multiple Stage ilter Holders ilter Holder omponents ilter Holder Membranes ilter Holder ccessories ilter Holders Membranes Membranes are produced of pure PT Membranes are chemically and biologically inert, stable up to 500º/260º and will withstand most concentrated acids and bases Membranes are compatible with strong acids, aggressive solvents and high temperatures Ideal for applications requiring extreme temperatures or aggressive chemicals without adding particulates to the filtrate Naturally hydrophobic, very useful for aerosol sampling, air venting and gas filtration, especially in environments also containing water vapor or submicron filtering of aqueous solutions, pre-wetting with methanol, ethanol or isopropyl alcohol to establish flow with lower pressure differentials is required Sterilize with steam or bactericidal solutions Ten membranes per package Part Number Membrane O Pore Size Thickness mm 1-2 micron.25 mm mm.2 micron.065 mm mm.45 micron.07 mm mm 1-2 micron.25 mm mm 5-6 micron.10 mm mm micron.14 mm mm micron.20 mm mm 1-2 micron.25 mm mm 5-6 micron.10 mm mm micron.14 mm mm micron.20 mm mm.2 micron.065 mm mm.45 micron.07 mm mm 1-2 micron.25 mm mm 5-6 micron.10 mm mm micron.14 mm mm micron.20 mm mm.2 micron.065 mm mm.45 micron.07 mm 33 Phone

37 ilter Holders Single Stage ilter Holders Multiple Stage ilter Holders ilter Holder omponents ilter Holder Membranes ilter Holder ccessories Membranes, continued Inlet Membrane Membrane Membrane lamp Grid Grid Grid Support Ring Support Ring Outlet Part Number Membrane O Pore Size Thickness mm 1-2 micron.25 mm mm 5-6 micron.10 mm mm micron.14 mm mm micron.20 mm mm.2 micron.065 mm mm.45 micron.07 mm mm 1-2 micron.25 mm mm 5-6 micron.10 mm mm micron.14 mm mm micron.20 mm mm.2 micron.065 mm mm.45 micron.07 mm mm 1-2 micron.25 mm mm 5-6 micron.10 mm mm micron.14 mm mm micron.20 mm mm 1-2 micron.25 mm mm 5-6 micron.10 mm mm micron.14 mm mm micron.20 mm 34

38 Single Stage ilter Holders Multiple Stage ilter Holders ilter Holder omponents ilter Holder Membranes ilter Holder ccessories ilter Holders ilter low Rates ILTRS PRSSUR ROP VS. IR LOW ILTRS PRSSUR ROP VS. WTR LOW ILTRS PRSSUR ROP VS. WTR LOW ILTRS PRSSUR ROP VS. IR LOW 35 Phone

39 ilter Holders Single Stage ilter Holders Multiple Stage ilter Holders ilter Holder omponents ilter Holder Membranes ilter Holder ccessories ilter low Rates, continued SM (air) HOLRS # and # SM (air) HOLRS # and # SM (air) HOLRS # /8 tube end SM (air) HOLRS # ferrule nut end SUMIRON (47 MM) URVS R VRG O HOLRS # and #

40 Single Stage ilter Holders Multiple Stage ilter Holders ilter Holder omponents ilter Holder Membranes ilter Holder ccessories ilter Holders ilter Holder ccessories Wrench Set Glass polypropylene wrench set used to tighten connections between P components Part Number escription Use With Wrench set 47, 50 and 90 mm filter holders Stopper ssembly or use in glass flasks errule nut accepts 3/8 O tube Tube # sold separately Part Number escription Size Stopper assembly, #6 taper 30.0 mm Stopper assembly, #7 taper 33.3 mm Stopper assembly, #8 taper 37.3 mm Special apabilities ilter holders can be modified to fit your specific applications xamples shown below use standard Savillex components Pressure filtration assembly (25 mm) molded of P meets requirements for USP method etermination of carbon & nitrogen in sediment and particulates of estuarine/coastal waters using elemental analysis iltering assembly (47 mm) molded of P. or processing samples for analysis of dissolved organic carbon. Wilde,..; Radtke,..; Gibs, J.; and Iwatsubo, R.T.; eds., 1998, National ield Manual for ollection Water Quality ata, hapter 2, Selection of quipment for Water Sampling, U.S. Geological Survey - TWRI, ook 9, hapter mm holder used with a side port suction flask Shown with stopper # Phone

41 Impingers Table of ontents Impingers Impinger ccessories

42 Impingers Impinger ccessories 40 Impingers Impingers Molded of P Impingers are suitable for use in nvironmental Protection gency procedures Glass polypropylene wrench set # recommended for tightening 375 ml impingers Grooved vessel allows for efficient heat transfer Top port on 60 ml impingers has through port location that allows tubing to pass through to vessel bottom Vertical port allows for close assembly of sampling train Ultem clamp does not contact fluid stream Reduced 2.3 mm orifice available as a push-in insert (see Impinger ccessories on page 40) Part Number Volume escription iameter x Height Vessel esign Port Style ml Impinger with 33 mm 36.8 mm x mm Plain (2) 1/8 tube ports threaded transfer closure 1.45" x 6.85" One on top, one on side ml Impinger with 33 mm 37.3 mm x mm Plain (2) 1/8 tube ports threaded transfer closure 1.47" x 6.85" P insert and Ultem clamp ml Impinger with 33 mm 36.8 mm x mm Plain (2) 1/4 tube ports threaded transfer closure 1.45" x 6.83" One on top, one on side ml Impinger with 33 mm 37.3 mm x mm Plain (2) 1/4 tube ports threaded transfer closure 1.47" x 6.83" P insert and Ultem clamp ml Vessel only 53.6 mm x mm Plain " x 11.68" ml Vessel only 53.6 mm x mm Grooved " x 11.68" ml Impinger with 1-1/2 NPT 58.2 mm x mm Plain (2) 1/2 tube ports threaded transfer closure 2.29" x 12.94" ml Impinger with 1-1/2 NPT 58.2 mm x mm Grooved (2) 1/2 tube ports threaded transfer closure 2.29" x 12.94" 39 Phone

43 Impingers Impingers Impinger ccessories 40 Impinger ccessories Wrench Set Glass polypropylene wrench set used to tighten connections on impingers Part Number escription Use With Wrench set 375 ml impingers ittings Molded of P Part Number escription Impinger orifice, 2.3 mm I, fits into 1/2 port 751-SU8N Straight union, 1/2 O tube 750-SU10-8N Knurled straight union reducer, 5/8 O tube to 1/2 O tube Tube ends ormed from P Tube bends allow for close assembly of sampling train G H I Part Number escription Use With º tube bend with 1/4 O 60 ml impingers º tube bend with 1/4 O 60 ml impingers º tube bend with 1/2 O, full depth 375 ml impingers º tube bend with 1/2 O, full depth 375 ml impingers º tube bend with 1/2 O, 6 legs 375 ml impingers I H G 40

44 Sub-boiling Stills Table of ontents Sub-boiling Still ssemblies ondenser ssembly Sub-boiling Still omponents Sub-boiling Still ccessories

45 Sub-boiling Stills Sub-boiling Still ssemblies ondenser ssembly.42 Sub-boiling Still omponents Sub-boiling Still ccessories Sub-boiling Still ssemblies Molded of P Vent port One piece inner P coil inserted in cooling side Grooved vessel allows for efficient heat transfer on evaporating side Plain vessel has smooth surface for use with electrothermal wraps on evaporating side Glass polypropylene wrench set # (page 43) and a package of ten membranes # (page 33) included with each sub-boiling still vaporating side is smooth for electrothermal wraps One piece P inner cooling coil Part Number Volume escription ml each side Plain vessel with vent port ml each side Plain vessel with bottom stopcock and vent port ml each side Plain vessel with side stopcock and vent port ml each side Grooved vessel with vent port ml each side Grooved vessel with bottom stopcock and vent port ml each side Grooved vessel with side stopcock and vent port vaporating side is grooved for heat transfer Remove clean acid or transfer for double distillation Remove residual acid through optional stopcock which can be added to vessel bottom or side ondenser ssembly Molded of P One piece, 1/4 O inner P coil Top and bottom ports for cooling water Two side ports for condensing process Glass polypropylene wrench set # recommended for tightening Part Number Volume escription ml Plain vessel 42

46 Sub-boiling Still ssemblies ondenser ssembly.42 Sub-boiling Still omponents Sub-boiling Still ccessories Sub-boiling Stills Sub-boiling Still omponents Use these components to build stills to fit your specific application lbow losure Vessel Vessels Molded of P Two vessels can be connected using 90º elbow to form sub-boiling stills Part Number Volume escription ml Vessel only ml Vessel only ml Jar only ml Jar only losure Molded of P Modified closure connects elbow to standard 1000, 2000 and 2200 ml jars Part Number escription Use With losure with integral molded 1-1/2 MNPT threads, 1000, 2000 and 2200 ml jars screws directly into elbow lbow Molded of P 90º elbow is used to connect 120 ml and 375 ml vessels to form sub-boiling stills Part Number escription º elbow includes two fused end caps G ondenser oil Molded of P 1-1/2 coil diameter fits inside standard 375 ml vessel 6 tubing tails allow for connection to 1/4 fitting Part Number escription imensions Still condenser coil 5/32 I x 1/4 O Sub-boiling Still ccessories Part Number escription Use With Glass polypropylene wrench set 120 ml vessels Glass polypropylene wrench set 375 ml vessels G 43 Phone

47 olumn omponents Table of ontents olumn omponent Vessels olumn omponent Segments olumn omponent losures olumn omponent ccessories

48 olumn omponent - Vessels Segments losures ccessories olumn omponents olumn omponent Vessels olumn component vessels are molded of P Vessels are interchangeable and can be used with other column components to assemble multipurpose columns ssembled columns are rated to 75 PSI at 100º/37º Service temperature range of P is -370º/-200º to 500º/260º Glass polypropylene wrench set # recommended for tightening Part Number Volume escription iameter x Height Vessel esign ml olumn component vessel 53.3 mm x 48.5 mm lat inside with 1-1/2 MNPT threads 2.10" x 1.91" Standard outside ml olumn component vessel 53.3 mm x 53.1 mm lat inside with 1-1/2 MNPT threads 2.10" x 2.09" Standard outside ml olumn component vessel 53.3 mm x mm lat inside with 1-1/2 MNPT threads 2.10" x 4.67" Standard outside ml olumn component vessel 53.3 mm x mm lat inside, standard outside with 1-1/2 MNPT threads 2.10" x 4.67" (1) 1/8 side port ml olumn component vessel 53.3 mm x mm lat inside, standard outside with 1-1/2 MNPT threads 2.10" x 4.67" (1) 1/4 side port ml olumn component vessel 53.3 mm x mm lat inside, standard outside with 1-1/2 MNPT threads 2.10" x 4.67" (1) 1/4 NPT side port ml olumn component vessel 53.3 mm x mm lat inside, standard outside with 1-1/2 MNPT threads 2.10" x 4.67" (1) 3/8 NPT side port ml olumn component vessel 53.8 mm x mm lat inside with 1-1/2 MNPT threads, plain 2.12" x 11.73" Standard outside ml olumn component vessel 53.8 mm x mm lat inside with 1-1/2 MNPT threads, grooved 2.12" x 11.73" Standard outside 675 ml losed column Various fitting positions shown for 1/4 or 3/8 tubing 525 ml olumn with 3/8 tube fitting at top, 1/4 at side segment at bottom 45 Phone

49 olumn omponents olumn omponent - Vessels Segments losures ccessories olumn omponent Segments olumn component segments are molded of P Segments are interchangeable and can be used with other column components to assemble multipurpose columns ssembled columns are rated to 75 PSI at 100º/37º Glass polypropylene wrench set # recommended for tightening emale connector can be found on page 47 G G Part iameter x Number Volume escription Height Segment esign ml olumn component segment 50.3 mm x 76.2 mm - with 1-1/2 MNPT threads 1.98" x 3.00" ml olumn component segment 53.3 mm x mm - with 1-1/2 MNPT threads 2.10" x 4.81" ml olumn component segment 53.3 mm x mm (1) 1/8 side tube port with 1-1/2 MNPT threads 2.10" x 4.81" ml olumn component segment 53.3 mm x mm (1) 1/4 side tube port with 1-1/2 MNPT threads 2.10" x 4.81" ml olumn component segment 53.3 mm x mm (1) 1/4 with 1-1/2 MNPT threads 2.10" x 4.81" NPT side port ml olumn component segment 53.3 mm x mm (1) 3/8 with 1-1/2 MNPT threads 2.10" x 4.81" NPT side port ml olumn component segment 53.3 mm x mm (1) 3/8 side tube port with 1-1/2 MNPT threads 2.10" x 4.81" ml olumn component segment 53.3 mm x mm - with 1-1/2 MNPT and filter holder threads 2.10" x 4.81" ml olumn component segment 53.3 mm x mm (1) 1/8 side tube port with 1-1/2 MNPT and filter holder threads 2.10" x 4.81" ml olumn component segment 53.3 mm x mm (1) 1/4 side tube port with 1-1/2 MNPT and filter holder threads 2.10" x 4.81" ml olumn component segment 53.3 mm x mm (1) 3/8 side tube port with 1-1/2 MNPT and filter holder threads 2.10" x 4.81" ml olumn component segment 53.3 mm x mm - with 1-1/2 MNPT threads 2.10" x 11.67" Note: imensions listed in this catalog are approximate. Please call for exact dimensions ml Location 1/4 side port one piece molding ilter holder thread adapts to any 47 mm or 50 mm filter 46

50 olumn omponent - Vessels Segments losures ccessories olumn omponents olumn omponent losures olumn component closures are molded of P losures are interchangeable and can be used with other column components (pages 45 and 46) to assemble multipurpose columns ssembled columns are rated to 75 PSI at 100º/37º Glass polypropylene wrench set # recommended for tightening Part Number escription losure esign olumn component closure with 1-1/2 NPT threads Plain olumn component closure with 1-1/2 NPT threads (1) 1/8 tube port olumn component closure with 1-1/2 NPT threads (1) 1/4 tube port olumn component closure with 1-1/2 NPT threads (1) 1/4 NPT port olumn component closure with 1-1/2 NPT threads (1) 3/8 tube port olumn component closure with 1-1/2 NPT threads (2) 1/8 tube ports olumn component closure with 1-1/2 NPT threads (2) 1/4 tube ports olumn component closure with 1-1/2 NPT threads (2) 1/4 NPT ports olumn component closure with 1-1/2 NPT threads (2) 3/8 tube ports olumn component closure with 1-1/2 NPT threads (2) 1/2 tube ports olumn omponent ccessories G H I Part Number escription Glass polypropylene wrench set Pressure fixture for column components emale connector for column components olumn component screen G I H 47 Phone

51 losures Table of ontents P losures for Savillex Products P losures for Glass Products

52 P losures for Savillex Products..49 P losures for Glass Products losures P losures for Savillex Products G H I J K L G H I J K L losure can be used with these Savillex products: losure Number/ utosampler Microcentrifuge igestion olumn escription Jars Vials Vials Vials Tubes Vessels Microcolumns Impingers omponents mm plain threaded mm septum threaded - - same as above mm autosampler pierceable threaded - - same as above mm microcentrifuge push-on mm Ludwig push-on mm microcentrifuge push-on mm autosampler push-on mm pick-up knob mm Parrish push-on mm plain threaded mm snap-on mm valveless threaded mm plain threaded mm transfer, (1) 1/8" tube port - same as above - - same as above - same as above mm transfer, (1) 1/4" tube port - same as above - - same as above - same as above mm transfer, (1) 3/8" tube port - same as above - - same as above - same as above - - Port dimension given on transfer closure indicates tubing O. 49 Phone

53 losures P losures for Savillex Products..50 P losures for Glass Products P losures for Savillex Products, continued M N O Q R S P M N O P Q R S losure can be used with these Savillex products: losure Number/ utosampler Microcentrifuge igestion olumn escription Jars Vials Vials Vials Tubes Vessels Microcolumns Impingers omponents mm plain threaded mm transfer, (1) 1/8" tube port - same as above same as above - same as above - same as above mm transfer, (1) 1/4" tube port - same as above same as above - same as above - same as above mm transfer, (1) 3/8" tube port - same as above same as above - same as above - same as above mm transfer, (2) 1/8" tube push-in side ports - same as above same as above - same as above - same as above mm recessed threaded - same as above same as above - same as above - same as above mm septum threaded - same as above same as above - same as above - same as above mm snap-on mm plain threaded mm plain threaded mm snap-on continued on following page losures can be modified upon request. 50

54 P losures for Savillex Products..51 losures P losures for Glass Products P losures for Savillex Products, continued G losure can be used with these Savillex products: losure Number/ utosampler Microcentrifuge igestion olumn escription Jars Vials Vials Vials Tubes Vessels Microcolumns Impingers omponents mm plain threaded mm transfer, (1) 1/8" tube port - same as above - - same as above - same as above mm transfer, (1) 1/4" tube port - same as above - - same as above - same as above mm transfer, (1) 3/8" tube port - same as above - - same as above - same as above mm transfer, (2) 1/8" tube push-in side ports - same as above - - same as above - same as above mm transfer, (2) 1/4" tube push-in side ports - same as above - - same as above - same as above mm recessed threaded - same as above - - same as above - same as above mm septum threaded - same as above - - same as above - same as above mm transfer, (2) 1/8" tube ports, one top, one side Phone Port dimension given on transfer closure indicates tubing O.

55 losures P losures for Savillex Products..52 P losures for Glass Products P losures for Savillex Products, continued H I J G H I J losure can be used with these Savillex products: losure Number/ utosampler Microcentrifuge igestion olumn escription Jars Vials Vials Vials Tubes Vessels Microcolumns Impingers omponents mm transfer, (2) 1/8" tube ports, P insert, Ultem clamp mm transfer, (2) 1/4" tube ports, one top, one side - same as above same as above same as above mm transfer, (2) 1/4" tube ports, P insert, Ultem clamp - same as above same as above same as above mm transfer, (1) 1/ 8" tube side port, (1) 1/4" top port - same as above same as above same as above mm transfer, (1) 1/8" tube top port, (1) 1/4" side port - same as above same as above same as above mm, push-in mm plain threaded mm transfer, (2) 1/8" tube ports same as above mm transfer, (2) 1/4" tube ports same as above mm recessed threaded same as above continued on following page 52

56 P losures for Savillex Products..53 P losures for Glass Products losures P losures for Savillex Products, continued losure can be used with these Savillex products: losure Number/ utosampler Microcentrifuge igestion olumn escription Jars Vials Vials Vials Tubes Vessels Microcolumns Impingers omponents Plain buttress threaded Transfer, (1) 1/8" tube port, buttress threaded same as above Transfer, (1) 1/4" tube port, buttress threaded same as above Transfer, (2) 1/8" tube ports, buttress threaded same as above Transfer, (2) 1/4" tube ports, buttress threaded same as above Transfer, (3) 1/8" tube ports, buttress threaded same as above Transfer, (5) 1/8" tube ports, buttress threaded same as above Pressure relief valve, buttress threaded same as above Port dimension given on transfer closure indicates tubing O. losures can be modified upon request. 53 Phone

57 losures P losures for Savillex Products..54 P losures for Glass Products P losures for Savillex Products, continued losure can be used with these Savillex products: losure Number/ utosampler Microcentrifuge igestion olumn escription Jars Vials Vials Vials Tubes Vessels Microcolumns Impingers omponents Plain threaded, 1-1/2 NPT threads Transfer, (1) 1/8" tube port, 1-1/2 NPT threads same as above Transfer, (1) 1/4" tube port, 1-1/2 NPT threads same as above Transfer, (1) 1/4" NPT port, 1-1/2 NPT threads same as above Transfer, (1) 3/8" tube port, 1-1/2 NPT threads same as above Transfer, (2) 1/8" tube ports, 1-1/2 NPT threads same as above Transfer, (2) 1/4" tube ports, 1-1/2 NPT threads same as above Transfer, (2) 1/4" NPT ports, 1-1/2 NPT threads same as above Transfer, (2) 3/8" tube ports, 1-1/2 NPT threads same as above Transfer, (3) 1/8" tube ports, 1-1/2 NPT threads same as above Transfer, (5) 1/8" tube ports, 1-1/2 NPT threads same as above Pressure relief valve, Ultem clamp, 1-1/2 NPT threads same as above continued on following page 54

58 P losures for Savillex Products..55 losures P losures for Glass Products P losures for Savillex Products, continued 55 losure can be used with these Savillex products: losure Number/ utosampler Microcentrifuge igestion olumn escription Jars Vials Vials Vials Tubes Vessels Microcolumns Impingers omponents Transfer, (2) 1/2" tube ports, 1-1/2 NPT threads mm plain threaded mm transfer, (1) 1/4" tube port same as above mm transfer, (2) 1/8" tube ports same as above mm transfer, (2) 1/4" tube ports same as above mm plain threaded mm transfer, (2) 1/8" tube ports same as above mm transfer, (2) 1/4" tube ports same as above Phone Port dimension given on transfer closure indicates tubing O.

59 losures P losures for Savillex Products..56 P losures for Glass Products P losures for Savillex Products, continued G G losure can be used with these Savillex products: losure Number/ utosampler Microcentrifuge igestion olumn escription Jars Vials Vials Vials Tubes Vessels Microcolumns Impingers omponents mm plain threaded mm transfer, (2) 1/8" tube ports same as above mm transfer, (2) 1/4" tube ports same as above mm transfer, (2) 3/8" tube ports same as above mm transfer, (2) 1/2" tube ports same as above mm transfer, (3) 1/4" tube ports same as above mm transfer, (3) 3/8" tube ports same as above mm transfer, (7) 1/4" tube ports same as above mm transfer, (7) 3/8" tube ports same as above mm transfer, (2) 1/4" tube & (5) 3/8" tube ports same as above mm transfer, (4) 1/4" tube & (3) 3/8" tube ports same as above mm transfer, (6) 1/4" tube & (1) 3/8" tube ports same as above mm with molded 1-1/2 MNPT adapter same as above losures can be modified upon request. 56

60 P losures for Savillex Products..49 P losures for Glass Products losures P losures for Glass Products G H Part Number escription mm valveless threaded mm valveless threaded mm valveless threaded mm valveless threaded mm valveless threaded mm valveless threaded mm valveless threaded mm valveless threaded mm plain, thread finish mm transfer, (2) 1/8" tube ports, thread finish, polypropylene clamp mm transfer, (2) 1/8" tube ports, one top, one side, thread finish mm transfer, (2) 1/4" tube ports, thread finish, polypropylene clamp mm transfer, (2) 1/4" tube ports, one top, one side mm transfer, (1) 1/8" tube side port, (1) 1/4" top port, thread finish mm transfer, (1) 1/8" tube top port, (1) 1/4" side port, thread finish mm plain, 400 thread finish mm transfer, (2) 1/4" tube ports, 400 thread finish mm transfer, (2) 1/4" tube ports, wide-mouth mason Port dimension given on transfer closure indicates tubing O. Glass bottles not available from Savillex G H 57 Phone

61 Specialty Products Table of ontents rop-in Inserts ishes Sieves/ippers Syringes eakers Miscellaneous

62 rop-in Inserts ishes Sieves/ippers Syringes eakers Miscellaneous Specialty Products rop-in Inserts Molded of P rop-in inserts are machined to a uniform height allowing retrieval by forceps Part Number escription rop-in insert for six place well plate rop-in insert for 12 place well plate rop-in insert for 24 place well plate ishes Petri ishes Molded of P Petri dishes are stackable Part Number escription imensions Petri dish 50 mm diameter x 10 mm depth Petri dish 100 mm diameter x 15 mm depth vaporating ish Molded of P vaporating dish has pour spout Part Number escription Volume vaporating dish 100 ml 59 Phone

63 Specialty Products rop-in Inserts ishes Sieves/ippers Syringes eakers Miscellaneous Sieves/ippers Molded of P One piece molded hook at base of handle allows sieve to be used in drying position Part Number escription Sieve with.5 mm square openings Sieve with 1 mm square openings ipper, 40 ml volume Shown with jar # Syringes Molded of P Plunger made of PT Ideal for ultra pure sampling G Part Number escription Volume Syringe with integral seal 10 ml Syringe with integral seal 20 ml Syringe dispense tube for 10 ml syringe, male leur lock Syringe with permanent retrieve-dispense tube and integral seal 20 ml Syringe push-in tube for 10 ml syringe,.8 mm x 100 mm - G 13 mm filter holder shown on page 27 eakers Molded of P lat outside bottom designed for hot plate heat transfer Part Number escription Volume H eaker 2 ml I eaker, graduated 50 ml J eaker, graduated 125 ml K eaker, graduated 250 ml L eaker, graduated 500 ml H I J K L eakers, five-piece set 2 ml 50 ml 125 ml 250 ml 500 ml 60

64 rop-in Inserts ishes Sieves/ippers Syringes eakers Miscellaneous Specialty Products Miscellaneous Specialty Products Tefzel loth ut from Tefzel T fluoropolymer resin Used for forming container screens and soft dip baskets Standard size 11 x 11 ; larger sizes available upon request Part Number Mesh Opening Thread iameter loth Thickness (105 micron).003 (76 micron).0067 (170 micron) unnels Molded of P unnels have 60º angle Part Number Volume Height Reservoir O Stem Length Stem I ml 82.5 mm 61.9 mm 31.0 mm 4.7 mm ml mm 84.0 mm 76.0 mm 4.7 mm Pipette Tip Molded of P Part Number escription Pipette tip with standard.8 mm orifice Screen Molded of P an be used in vials and jars to hold samples in solution or act as a coarse filter Screen shown on page 9 Part Number escription O Thickness Screen with 1.0 mm openings 82.5 mm 3.5 mm H G H Titration Vessel P volumetric reaction vessel for titration analysis xtra sturdy with flanged rim for clamping Inside bottom will accept 17.5 mm stir bar Part Number Volume iameter x Height ml 70.0 mm x 80.0 mm Trays Molded of P Part Number escription imensions Tray with cover 1-1/2 x 3-1/4 x 3/ Tray only 1 x 4 x 3/ Tray only 6 x 4 x 2 G J I J Pots Molded of P Part Number escription iameter Volume Pot only ml Pot cover 6 - I 61 Phone

65 Tubing Table of ontents oiled Tubing Straight Tubing Monofilament Tubing ccessories

66 oiled Tubing Straight Tubing Tubing Monofilament Tubing ccessories..64 oiled Tubing Use heavy wall tubing for permanent connections oiled tubing is flexible and translucent vailable in 5, 25 or 100 coils Maximum service temperature for P is 545º/285º Maximum service temperature for P is 400º/205º Part Number escription Material I O Length oiled tubing P 1/16 1/ oiled tubing P 1/16 1/ oiled tubing P 1/16 1/ oiled tubing P 1/8 3/ oiled tubing P 5/32 1/ oiled tubing P 5/32 1/ oiled tubing P 5/32 1/ oiled tubing P 1/4 3/ oiled tubing P 1/4 3/ oiled tubing P 1/4 3/ oiled tubing P 3/8 1/ oiled tubing P 3/8 1/ oiled tubing P 3/8 1/ oiled tubing P 1/16 1/ oiled tubing P 1/16 1/ oiled tubing P 1/16 1/ oiled tubing P 5/32 1/ oiled tubing P 5/32 1/ oiled tubing P 5/32 1/ oiled tubing P 1/4 3/ oiled tubing P 1/4 3/ oiled tubing P 1/4 3/ oiled tubing P 3/8 1/ oiled tubing P 3/8 1/ oiled tubing P 3/8 1/2 100 Straight Tubing P straight tube lengths can be used for microcolumn capillaries and rigid tubing applications Part Number escription Material I O Length Straight tubing P 1/32 3/ Straight tubing P 1/32 1/ Straight tubing P 1/16 1/ Straight tubing P 3/32 5/ Straight tubing P 1/8 3/ Straight tubing P 5/32 1/ Straight tubing P 3/16 1/ Straight tubing P 1/4 3/ Straight tubing P 5/16 3/ Straight tubing P 3/8 1/ Straight tubing P 1/2 5/ Phone

67 Tubing oiled Tubing Straight Tubing Monofilament Tubing ccessories..64 Monofilament Use to sew together soft dip baskets or to suspend articles in corrosive solutions vailable in 25 coils Maximum service temperature for P is 545º/285º Maximum service temperature for P is 400º/205º Maximum service temperature for T is 302º/150º Part Number escription Material O Length Monofilament P Monofilament P Monofilament P Monofilament T Tubing ccessories Grooves tubing at fitting locations and prevents tubing blow-out at higher pressures Part Number escription Groove tool, 1/ Groove tool, 1/ Groove tool, 3/ Groove tool, 1/2 64

68 ittings Table of ontents 65 errule Nuts Straight Unions/Reducers.. 66 Panel Mounts onnectors Union Tees lbows/reducers Stopcocks arb ittings itting ccessories

69 errule Nuts ittings errule Nuts Straight Unions/Reducers..66 Panel Mounts onnectors Union Tees lbows/reducers Stopcocks arb ittings itting ccessories Molded of P errule nuts provide for leak-free tubing connections errule cap nuts are used to seal off tubing connections Vent nut with ferrule removed provides for hydrophobic venting of 1/4 ports Vent nut has a 9 mm diameter recess PT membranes and PT/silicone laminated septa can be used in vent nut (see fitting accessories on page 69) Gripper made of carbon-filled T G H I Part Number 750-N2 750-N4 750-N6 750-N8 750-N N4M 750-N6M 750-N4V 750-P2 750-P4 750-P6 750-P8 750-P N2 751-N4 751-N6 751-N8 751-P2 751-P4 751-P6 751-P8 751-GN GN6-1 escription,tube Size Knurled ferrule nut, 1/8 O Knurled ferrule nut, 1/4 O Knurled ferrule nut, 3/8 O Knurled ferrule nut, 1/2 O Knurled ferrule nut, 5/8 O Knurled ferrule nut, 4 mm O Knurled ferrule nut, 6 mm O Knurled vent nut, 1/4 O Knurled ferrule cap nut, 1/8 O Knurled ferrule cap nut, 1/4 O Knurled ferrule cap nut, 3/8 O Knurled ferrule cap nut, 1/2 O Knurled ferrule cap nut, 5/8 O errule hex nut, 1/8 O errule hex nut, 1/4 O errule hex nut, 3/8 O errule hex nut, 1/2 O errule cap nut, 1/8 O errule cap nut, 1/4 O errule cap nut, 3/8 O errule cap nut, 1/2 O errule hex nut, 1/4 O, gripper style errule hex nut, 3/8 O, gripper style G I H Straight Unions/Reducers Molded of P Straight unions used to connect same size tubings Straight union reducer used to connect different size tubing J K L M Part Number 750-SU4MN 750-SU10-8N 751-SU2N 751-SU4N 751-SU6N 751-SU8N 751-SU4-2N 751-SU6-4N 751-SU8-2N 751-SU8-4N 751-SU8-6N escription,tube Size Knurled straight union, 4 mm O x 4 mm O Knurled straight union reducer, 5/8 O to 1/2 O Straight union, 1/8 O tube x 1/8 O tube Straight union, 1/4 O tube x 1/4 O tube Straight union, 3/8 O tube x 3/8 O tube Straight union, 1/2 O tube x 1/2 O tube Straight union reducer, 1/4 O tube x 1/8 O tube Straight union reducer, 3/8 O tube x 1/4 O tube Straight union reducer, 1/2 O tube x 1/8 O tube Straight union reducer, 1/2 O tube x 1/4 O tube Straight union reducer, 1/2 O tube x 3/8 O tube J K L M 66

70 errule Nuts Straight Unions/Reducers..66 Panel Mounts onnectors Union Tees lbows/reducers Stopcocks arb ittings itting ccessories ittings Panel Mounts Molded of P Used for attaching tubing to flat sides of closures or vessel surfaces Part Number 751-PM2GN PM2N 751-PM4N 751-PM6N 751-PM8N 751-PM6-4N escription,tube Size Panel mount, 1/8 O tube x 1/8 O tube, gripper style Panel mount, 1/8 O tube x 1/8 O tube Panel mount, 1/4 O tube x 1/4 O tube Panel mount, 3/8 O tube x 3/8 O tube Panel mount, 1/2 O tube x 1/2 O tube Panel mount reducer, 3/8 O tube x 1/4 O tube onnectors Molded of P Male connectors may be added to vessels or closures to provide tubing connections emale connectors can be used with a MNPT fitting to provide tubing connections G Part Number N N GN N N N N N N N N escription,tube Size Male connector, 1/8 O tube x 1/4 MNPT Knurled male connector, 1/4 O tube x 1/4 MNPT Male connector, 1/4 O tube x 1/4 MNPT, gripper style Male connector, 1/4 O tube x 1/8 MNPT Male connector, 3/8 MNPT x 1/4 O tube Male connector, 3/8 O tube x 1/2 MNPT Male connector, 3/4 O tube x 3/4 MNPT emale connector, 1/8 O tube x 1/8 NPT emale connector, 1/4 NPT x 1/8 O tube emale connector, 1/4 O tube x 1/4 NPT emale connector, 3/8 NPT x 1/4 O tube G Union Tees J Molded of P Union tees are used to connect same size tubing Part Number escription,tube Size H 751-UT2N Union tee, 1/8 O tube 751-UT4GN-1 Union tee, 1/4 O tube, gripper style I 751-UT4N Union tee, 1/4 O tube 751-UT6N Union tee, 3/8 O tube J 751-UT8N Union tee, 1/2 O tube H I 67 Phone

71 lbows/reducers ittings errule Nuts Straight Unions/Reducers..66 Panel Mounts onnectors Union Tees lbows/reducers Stopcocks arb ittings itting ccessories Molded of P Male elbow can be added to a vessel or closure to provide a tubing connection Union elbow can be used to connect same size tubing Union elbow reducer can be used to connect tubing of different sizes K L M N Part Number N N N N GN N N N 751-U4N 751-U6N 751-U8N 751-U6-4N 751-U6-4GN U8-6N escription,tube Size Male elbow, 1/8 O tube x 1/8 MNPT Male elbow, 1/8 O tube x 1/4 MNPT Male elbow, 1/4 O tube x 1/4 MNPT Male elbow, 1/4 O tube x 1/8 MNPT Male elbow, 1/4 O tube x 1/8 MNPT, gripper style Male elbow, 3/8 O tube x 1/4 MNPT Male elbow, 3/8 O tube x 3/8 MNPT Male elbow, 1/2 O tube x 1/2 MNPT Union elbow, 1/4 O tube x 1/4 O tube Union elbow, 3/8 O tube x 3/8 O tube Union elbow, 1/2 O tube x 1/2 O tube Union elbow reducer, 3/8 O tube x 1/4 O tube Union elbow reducer, 3/8 O tube x 1/4 O tube, gripper style Union elbow reducer, 1/2 O tube x 3/8 O tube K L M N Stopcocks ll parts coming in contact with fluid stream are P and PT Stopcocks can be added to the side or bottom of vessels to be used as a drain an be used to control fluid stream between tubing connections Pressure rating 50 PSI up to 150º/66º Subtract 1 PSI from 50 PSI for every 2º/-17º rise above 150º/66º O P Q Part Number 751-PVT PVT2-T PVT PVT PVT4-T4-2 escription,tube Size Stopcock, 1/8 O tube x 1/8 MNPT Stopcock, 1/8 O tube x 1/8 O tube Stopcock, 1/4 O tube x 1/8 MNPT Stopcock, 1/4 O tube x 1/4 MNPT Stopcock, 1/4 O tube x 1/4 O tube O P Q 68

72 errule Nuts Straight Unions/Reducers..66 Panel Mounts onnectors Union Tees lbows/reducers Stopcocks arb ittings itting ccessories ittings arb ittings P straight adapters have a barb fitting tubing connection on one side and a MNPT port on the other side Part Number escription,tube Size arb fitting, 0.16 I tube x 1/8 NPT arb fitting, 0.25 I tube x 1/4 NPT itting ccessories Membranes Porous PT membranes can be used with 1/4 O vent nut, #750-N4V (see page 66) Part Number escription Membranes, 9 mm, 1-2 micron Laminates PT/silicone laminate can be used with 1/4 O vent nut, #750-N4V (see page 66) Laminate allows contents to be totally enclosed by PT while the resealable silicone can be pierced with syringe Silicone side PT side Part Number escription O PT Thickness Silicone Thickness PT/silicone laminate 9 mm.25 mm 1.3 mm 69 Phone

73 Sample Introduction Systems Table of ontents Nebulizers -low (oncentric low) X-low (ross low) Sample Introduction ccessories

74 Nebulizers -low X-low ccessories Sample Introduction Systems -low Nebulizers ll molded P oncentric Nebulizer - 6 mm body fits any standard end cap - O-ring free end cap available onsistently repeatable performance Straight capillary Self aspirate or pump One-piece gas port Part Number escription Material Uptake Rate Uptake Style Options oncentric flow nebulizer P 50 μl 700 mm length tubing x 1.6 mm O oncentric flow nebulizer P 50 μl 700 mm length tubing x 1.6 mm O Precleaned oncentric flow nebulizer P 50 μl 700 mm length tubing with I-S probe oncentric flow nebulizer P 50 μl 700 mm length tubing with I-S probe Precleaned oncentric flow nebulizer P 50 μl 700 mm length tubing with T SX-100 probe oncentric flow nebulizer P 50 μl 700 mm length tubing with T SX-100 probe Precleaned oncentric flow nebulizer P 100 μl 700 mm length tubing x 1.6 mm O oncentric flow nebulizer P 100 μl 700 mm length tubing x 1.6 mm O Precleaned oncentric flow nebulizer P 100 μl 700 mm length tubing with I-S probe oncentric flow nebulizer P 100 μl 700 mm length tubing with I-S probe Precleaned oncentric flow nebulizer P 100 μl 700 mm length tubing with T SX-100 probe oncentric flow nebulizer P 100 μl 700 mm length tubing with T SX-100 probe Precleaned oncentric flow nebulizer P 200 μl 700 mm length tubing x 1.6 mm O oncentric flow nebulizer P 200 μl 700 mm length tubing x 1.6 mm O Precleaned oncentric flow nebulizer P 200 μl 700 mm length tubing with I-S probe oncentric flow nebulizer P 200 μl 700 mm length tubing with I-S probe Precleaned oncentric flow nebulizer P 200 μl 700 mm length tubing with T SX-100 probe oncentric flow nebulizer P 200 μl 700 mm length tubing with T SX-100 probe Precleaned X-low Nebulizers ll molded P construction Self aspirate or pump Resistant to clogging O-ring free connections onsistently repeatable performance Interchangeable uptake lines Part Number escription Material Uptake Rate Makeup Gas Options ross flow nebulizer P 100 μl ross flow nebulizer P 100 μl - Precleaned ross flow nebulizer P 100 μl 4 mm O fitting ross flow nebulizer P 100 μl 4 mm O fitting Precleaned ross flow nebulizer P 400 μl ross flow nebulizer P 400 μl - Precleaned ross flow nebulizer P 400 μl 4 mm O fitting ross flow nebulizer P 400 μl 4 mm O fitting Precleaned ross flow nebulizer P 1 ml ross flow nebulizer P 1 ml - Precleaned ross flow nebulizer P 1 ml 4 mm O fitting ross flow nebulizer P 1 ml 4 mm O fitting Precleaned 71 Phone

75 Sample Introduction Systems Nebulizers -low X-low ccessories ccessories nd aps O-ring free connection to standard 35 mm spray chambers Part Number escription Use With mm end cap with makeup gas port at 90º 4 mm O and 6 mm O knurled ferrule nuts mm end cap without makeup gas 4 mm O and 6 mm O knurled ferrule nuts Spray hamber dapter dapts spray chamber connection from 47 mm to 35 mm Part Number escription imensions Spray chamber adapter 47 mm x 35 mm Tubing Used for high purity argon gas line Part Number escription O I Length PT tubing 4 mm 2.48 mm P tubing 4 mm 2.0 mm 10 ittings Replacement fittings for nebulizer assemblies Part Number escription 750-P4M Knurled ferrule cap nut, 4 mm O 750-SU4MN Knurled straight union, 4 mm O 750-N4M Knurled ferrule nut, 4 mm O 750-N6M Knurled ferrule nut, 6 mm O rgon adapter fitting, 4 mm O X-low Uptake Lines llows for interchangeable uptake rates Part Number escription Uptake Rate O Length X-low sample uptake line assembly 100 μl.062 mm X-low sample uptake line assembly 400 μl.062 mm X-low sample uptake line assembly 1 ml.062 mm 27.5 lso vailable Inert sample introduction system components: Spray hambers Injectors Please call for more information on these products. 72

76 73

77 ustom Molded Solutions ustom Molded Solutions apabilities & ompetencies s a global leader in the supply and support of P and fluoropolymer injection molded solutions, we have developed unique tooling technology. This allows us to provide an economical way to move to an injection molded component instead of more expensive, machined components, even on very short runs. s a vertically integrated company we offer: Injection molding of very small to large sizes bility to manufacture simple to complex designs Wide range of materials: P, P, T, T, PV, PP Insert and overmolding capabilities In-house tooling including tool design, fabrication, and the ability to make changes and modifications quickly Secondary operations including machining and fusion welding ssembly and post-cleaning Markets Served Savillex is committed to partnering with you to find reliable, cost-effective solutions for your custom and contract molding needs. emonstrated by our 30-plus years of experience, we have produced quality custom products and components that support and enable technologies in the following industries: Semiconductor Pharmaceutical hemical Processing Medical Technology nalytical Laboratories Industrial Service & Support Savillex provides the capabilities, experience and commitment to achieve your product and application requirements every step of the way. eveloping custom molded solutions is what we do best. In addition we offer: ast response and turnaround time ngineering and design support services Prototyping and product qualifications Low entry cost for molded solutions ost-effective delivery programs to meet your needs Submit your request online at lick on ustom Molding Inquiry. 74

78 75

79 Modified Products Modified Products...76 Modified Products In addition to our standard line of P labware and custom molding capabilities, we are also able to offer our expertise in modifying any of our products to better suit your specific application. Modified products can include: adding fittings machining parts to fit specific equipment molding in a different color welding parts together If you do not see exactly what you need in our catalog, please contact us and we will be happy to work with you to explore modifications to our existing product line. Standard Product Modified Product Standard Product Modified Product Standard Products Modified Product Standard labware products can be modified upon request. 76

80 Materials luoropolymers s your fluoropolymer experts, Savillex has experience in processing all of the materials listed below. P (perfluoroalkoxy) P is the material of choice for the majority of Savillex's products due to its superior properties. Of key importance is the purity of the material and its excellent chemical resistance, making it ideally suited for products serving the analytical, semiconductor, medical, pharmaceutical and chemical processing industries. P is translucent in color so you can see what is inside the product. It has the widest service temperature range of the fluorocarbons, ranging from -454º/-270º to 500º/260º. In comparison to PT, P demonstrates greater strength, stiffness and creep resistance. In addition, it has a low coefficient of friction and beneficial anti-stick properties. P is considered by some to be the best melt-processable fluoropolymer. PT (polytetrafluoroethylene) n extremely low coefficient of friction makes PT an excellent material where surface wear might be a problem. PT exhibits a useful service range from below -100º/-73º to temperature of over 500º/260º. Its resistance to solvents is excellent throughout a wide range of temperature. Its low dielectric constant and electric resistance also remain constant throughout this range. The major disadvantage with PT is the very high melt viscosity that makes processing difficult by normal extrusion and injection molding methods, and its propensity to creep and cold flow. or use in the fabrication of labware products PT is not ideal because the material is opaque, which does not allow the user to see inside the product. Parts are typically machined into final use products. P (fluorinated ethylene propylene) P has similar mechanical and chemical properties to PT but better impact strength and is melt-processable. The material tends to be translucent in color and fairly rigid. It offers excellent chemical resistance. P can withstand temperatures ranging from -454º/-270º to 392º/200º and may be sterilized repeatedly. T (ethylene-chlorotrifluoroethylene) T is translucent white and is a melt-processable alternating copolymer of ethylene and chlorotrifluoroethylene. It has excellent electrical properties and chemical resistance. T can withstand continuous exposure to extreme temperatures while maintaining its excellent mechanical properties. In addition, it is non-burning and resistant to radiation. T (ethylene-tetrafluoroethylene) T is a partially fluorinated copolymer that is translucent white in color and has good chemical resistance. Its mechanical properties approach that of fully fluorinated polymers but has a lower maximum service temperature. T is another melt-processable fluoropolymer with greater abrasion resistance and impact strength than P and PT. PV (polyvinylidene fluoride) PV is a partially fluorinated homopolymer and is made by polymerizing vinylidene monomer. It is opaque in color, resists UV radiation and offers high mechanical strength and abrasion resistance. These properties, along with its chemical resistance, make PV a popular choice for molded automotive, electrical and chemical piping products. P PT P T T PV 77 Phone

81 Materials luoropolymers, continued PK (polyetheretherketone) PK is a high temperature thermoplastic with excellent strength, creep and wear resistance properties, even at high temperatures. Though it is resistant to a wide range of organic and inorganic liquids its chemical compatibility is not that of P and other fully fluorinated polymers. Polyolefins PK PP (polypropylene) PP is translucent in color, autoclavable and is unaffected by solvents at room temperature. PP products tend to be brittle at 32º/0º and may crack or break if dropped. PP does offer the best stress-crack resistance of the polyolefins. HP (high-density polyethylene) HP is opaque in color, lightweight and provides very low moisture absorption. It has little branching, giving it stronger intermolecular forces and tensile strength than lower density polyethylene. It can withstand temperatures ranging from -148º/-100º to 248º/120º. PP HP pplication Properties luoropolymers Polyolefins P PT P T T PV PK PP HP ontinuous 260º 260º 200º 150º 150º 150º 250º 135º 120º Service Temp 500º 500º 392º 302º 302º 302º 482º 275º 248º rittleness Temp -270º -100º -270º -100º -105º -62º n/a 0º -100º Transparency translucent opaque translucent translucent translucent opaque opaque translucent opaque white white Microwavability Yes Yes Marginal Yes Yes Marginal Yes Yes No utoclaving Yes Yes Yes Yes Yes Yes Yes Yes No Sterilization Gas Yes Yes Yes Yes Yes Yes Yes Yes Yes ry Heat Yes Yes Yes Yes Yes No Yes No No Radiation No No No Yes Yes No Yes No No isinfectants Yes Yes Yes Yes Yes Yes Yes Yes Yes lexibility xcellent xcellent xcellent Rigid Rigid Rigid Rigid Rigid Rigid hemical xcellent xcellent xcellent Very Good Very Good Very Good Very Good Good Good Solvent Resistance Melting Point 302º-310º 320º-330º 275º 242º 265º 141º-178º 343º 160º-176º 125º-138º 576º-590º 608º-626º 527º 467º 509º 285º-352º 649º 320º-348º 257º-280º Mechanical Properties luoropolymers Polyolefins P PT P T T PV PK PP HP Specific Gravity Tensile Strength psi 4,000 3,500 3,500 7,000 6,500 5,000 14,500 4,800 4,900 oefficient of riction lame Rating V-O V-O V-O V-O V-O V-O V-O H H Water bsorption, 24h <0.03 % <0.01 % <0.01 % <0.01 % <0.03 % <0.04 % <0.50 % <0.02 % <0.01 % ielectric, constant 150 at 10 3 Hz The tables listed are a generally accepted summary of properties that we believe to be reliable. Please note that many of these resins are produced in several varieties and property characteristics may vary. Therefore, determination of resin is dependent on the application and this table is only meant to serve as a general guideline. 78

82 Materials, continued P Parts leaning Protocol Typical P parts cleaning protocols for low or sub parts-per-billion metals extractable analysis: Method 1 1. Rinse four times inside and out with UHP de-ionized water. 2. ill with acid mixture HNO3 and HI (7+2) or only with HNO3 (7%) for one day or leave overnight. 3. Rinse four times with UHP de-ionized water. 4. ill again with acid mixture HNO3 and Hl (7+2) or only with HNO3 (7%) for one day or leave overnight. 5. Rinse again four times with UHP de-ionized water and leave the P part filled with UHP de-ionized water or dry it (see 6). 6. or drying use a laminar flow clean bench. Then rinse the P part with the sample or process liquid before using. Use only ultra pure acids (purified by sub-boiling distillation), e.g. H, HNO3 and HI. Note: or more aggressive cleaning, the use of more concentrated acids is recommended. Method 2 1. ill with Hl (R grade). llow to stand one week at mpty and rinse with distilled water. 3. ill with HNO3 (R grade). 4. llow to stand one week at mpty and rinse with distilled water. 6. ill with purest available distilled water. 7. llow to stand several weeks or until needed, changing water periodically to ensure continued cleaning. 8. Rinse with purest water and allow to dry in a particle and fume-free environment. John R. Moody and Richard M. Lindstrom Reprinted from NLYTIL HMISTRY, Vol. 49, Page 2264 The above information is offered for reference only and is not intended as a specification. This information is based on reports received from customers of Savillex orporation who have been successful in adopting these protocols for low metals analysis. It is intended for use by persons having technical skill, at their own discretion and risk. It is given with the understanding that those using these protocols will satisfy themselves that their particular conditions of use present no health or safety hazards. We make no warranties, express or implied, and assume no liability in connection with any of this information. s with any process or protocol, evaluation under actual-use conditions prior to specification is essential. 79 Phone

83 We would like to take this opportunity to thank Savillex customers around the world for their business and loyalty. We would also like to acknowledge that, since the publication of our previous catalog, Savillex founder Russell Saville passed away. Russ took great pride in the catalog and in serving the many thousands of Savillex customers worldwide. He left a genuine legacy of responsive customer service and product innovation. We look forward to continuing to partner with you and provide you with new and innovative fluoropolymer solutions to help make your job easier and more efficient. Nomex and Tefzel are registered trademarks of upont. Ultem is a registered trademark of General lectric ompany.

84 Savillex orporation 6133 aker Road Minnetonka, MN US Tel: mail: ax: atalog 17