GLASS TAKE-OUT HOLDERS AND INSERTS
|
|
- Norman Lambert
- 5 years ago
- Views:
Transcription
1 GLSS TKE-OUT HOLERS N INSERTS Full line of holders and GLSSMTE inserts
2 lanks POO hot glass handling materials have high strength, durability and excellent thermal properties that reduce mechanical damage. lanks are ready to be machined with desired finish. Finished POO designers can assist with insert drawings to be precision machined into insert pairs. ustomers should supply a bottle drawing or neck ring drawing for custom inserts. POO s quality system is certified to ISO 9001:2008 and S9100:2009. Typical Finishes rown Thread Underthread ead GLSSMTE Insert Grades POO s GLSSMTE family of materials have been specifically developed for use in hot glass contact applications. GLSSMTE materials have the heat resistance, strength, durability and non-absorption characteristics to perform under the most rigorous conditions without damaging the glassware. POO s hot glass handling materials offer excellent performance combined with reduced mechanical damage for increased pack rates. GM GLSSMTE-GM - This material has high strength and durability for applications with high wear. n exceptional insert material for precision thread pick up and long production runs. SR GLSSMTE-SR - n economical material for short production runs. n ideal insert material for thick bead transfer applications. XL GLSSMTE-XL - n exceptionally strong and wear resistant 1 micron grade. Ideal material for highly detailed thread finishes and long run, high wear conditions. Take-out POO s unique design makes it easy to snap in a new insert or to change a holder without machine realignment. urable holders give long service life and will take all popular finishes up to 87 mm. Features Exact fit with accompanying GLSSMTE take-out inserts nti-rotational interlock design with inserts to assure positive finish alignment Spring tension clip designed to hold inserts firmly in place Insert slot design allows for quicker change outs of inserts Pins align two halves of the holder during production Shoulders on the holders ensure that both halves are square and of equal height Repair kits are available 2 POO GRPHITE, IN.
3 Holder Styles Standard for use with POO s GLSSMTE circular inserts for precision pickup. overed POO s covered holders are designed to prevent particle contamination of the ware and to reduce internal fused glass. overed holders should be used for contamination-sensitive product ware. Interior Spring (ILS-1 ) Our patent pending design has an interior locking system that significantly reduces foreign object debris. The holder design eliminates screws that can vibrate out or become damaged when in production, causing premature insert loss. The internal spring holder is adjustable to accommodate fixed or floating requirements and has self aligning shoulders for easy accurate placement. Side Mount These holders can be used with fixed or floating inserts. Side mount holders use standard rectangular inserts. Lightweight esigned for triple gob machines, the decreased shoulder of the holder allows more room between holders for machine set up. The lightweight holder features increased visibility and the reduced weight creates less wear on machine. The decreased shoulder, combined with additional metal removed at the back of holder, produces a lightweight holder than runs longer before adjustments of the machine are necessary. ual Function (PR-2) This holder can be used with either a fixed or floating insert. This holder allows the user to change the style of insert without changing holders. enefits include reduced tooling and increased pick up flexibility. ouble Stacked These holders should be used for tall, narrow neck ware to reduce bottle swing, which helps prevent stuck ware and allows faster transfer from the mold to the dead plate. Extended Extended holders are designed to allow bead transfer of ware with tall finishes and used with tamper-evident closures. Modified These holders allow increased visibility of the finish during precision set up process and are ideal for ware with very tight shoulder-to-bead dimensions. POO GRPHITE, IN. 3
4 Size 2" x ¼" with Fixed.984" mm E " mm 2.158" mm 1.563" mm 1.59" mm E " mm..620" mm 1.563" mm 2.40" mm 2.36" mm 1.610" mm 1.735" mm 2.40" mm 1.398" mm 2.625" mm.575" mm 2.40" mm 1.563" mm 1.560" mm 2.202" mm E E E Part Number Material Style overed Pins E arbon steel Lightweight No No E arbon steel Standard No Yes E arbon steel ouble stacked No Yes E arbon steel Standard No No E arbon steel Standard Yes No imensions Part Grade E GM Ø mm (.50") 6.35 mm (.25") E GM Ø mm (.50") 6.35 mm (.25") 1.59 mm (.063") Ø mm (1.41") E SR Ø mm (.50") 6.35 mm (.25") 3.18 mm (.125") Ø mm (1.41") E GM Ø mm (.50") 6.35 mm (.25") 3.18 mm (.125") Ø mm (1.41") E GM Ø mm (.50") 6.35 mm (.25") 6.35 mm (.25") Ø mm (1.41") E SR Ø mm (.50") 6.35 mm (.25") 6.35 mm (.25") Ø mm (1.41") 50.8 mm diameter (2") blanks with or without boss Maximum finish of Ø 31 mm (1.22") 4 POO GRPHITE, IN.
5 Size 2" x ¼" with Fixed or Floating (PR-2) mm 2.40" mm 2.402" mm E E " mm 2.001" mm 1.610" mm 1.398" mm 1.325" mm E E " 50.8 mm 1.560" mm 1.610" mm Part Number Material Style overed Pins E arbon steel ual function No Yes E arbon steel ual function Yes Yes E arbon steel ual function No No E arbon steel ual function Yes No imensions Part Grade E GM Ø mm (.50") 5.59 mm (.220") 6.35 mm (.25") Ø mm (1.41") E GM Ø mm (.50") 5.59 mm (.220") 3.18 mm (.125") Ø mm (1.41") E XL Ø mm (.50") 5.59 mm (.220") 3.18 mm (.125") Ø mm (1.41") 50.8 mm diameter (2") blanks with or without boss Maximum finish of Ø 31 mm (1.22") POO GRPHITE, IN. 5
6 Size 2 ⅛" x ¼" with Fixed or Floating 2.44" mm 1.700" mm 1.365" mm.937" 23.8 mm 2.440" mm 1.245" mm 2.031" mm 1.475" mm 2.031" mm 1.475" mm E E E E (ILS-1) E (ILS-1) Part Number Material Style overed Pins E arbon steel Side mount No No E Stainless steel Side mount No No E Stainless steel Side mount Yes No E Stainless steel Internal spring No No E Stainless steel Internal spring Yes No imensions Part Grade E SR Ø mm (.50") 5.08 mm (.20") 4.32 mm (.17") Ø mm (1.65") E SR Ø mm (.50") 6.35 mm (.25") 2.54 mm (.10") Ø mm (1.65") E SR Ø mm (.50") 6.35 mm (.25") 5.08 mm (.20") Ø mm (1.65") mm W x 54.1 mm L (1.720" W x 2.130" L) blanks with or without boss Maximum finish of Ø 38 mm (1.496") 6 POO GRPHITE, IN.
7 Size 2 ½" x ¼" with Fixed 2.437" mm 1.958" mm 2.985" mm 1.610" mm 1.398" mm 3.188" mm.750" mm 2.058" mm 2.485" mm 2.125" mm 2.658" mm E E E " mm.570" mm 1.610" mm 1.398" mm E " mm 1.958" mm Part Number Material Style overed Pins E arbon steel Standard No Yes E arbon steel Standard No No E arbon steel ouble stacked No Yes E arbon steel Standard Yes Yes E imensions Part Grade E E GM Ø mm (.50") 6.35 mm (.25") 6.35 mm (.25") Ø mm (1.82") E GM Ø mm (.50") 6.35 mm (.25") mm (.50") Ø mm (1.82") E SR Ø mm (.50") 6.35 mm (.25") 6.35 mm (.25") Ø mm (1.82") 6.35 mm (.25") E SR Ø mm (.50") 6.35 mm (.25") 63.5 mm diameter (2.5") blanks with or without boss Maximum finish of Ø 41 mm (1.614") POO GRPHITE, IN. 7
8 Size 3" x ¼" with Fixed 2.402" mm 1.61" mm 1.398" mm 1.398" mm.937" mm 1.610" mm 2.402" mm 3.375" mm 2.375" mm 1.596" mm 2.375" mm 3.374" mm E E E Part Number Material Style overed Pins E arbon steel Standard No Yes E arbon steel Standard No No E arbon steel Standard Yes Yes imensions Part Grade E GM Ø mm (.50") 6.35 mm (.25") E GM Ø mm (.50") 6.35 mm (.25") 3.18 mm (.125") Ø mm (2.235") 76.2 mm diameter (3") blanks with or without boss Maximum finish of Ø 52 mm (2.047") 8 POO GRPHITE, IN.
9 Size 3" x ⅜" with Fixed.984" mm.997" mm.406" mm 3.031" mm 2.328" mm E " mm 3.313" mm Holder Part Number Material Style overed Pins E arbon steel Extended No No imensions Part Grade E SR Ø mm (.50") 9.52 mm (.375") 76.2 mm diameter (3") blanks with or without boss Maximum finish of Ø 52 mm (2.047") POO GRPHITE, IN. 9
10 Size 3 ⅝" x ¼" with Fixed 1.985" mm 1.625" mm 2.688" mm 1.985" mm 2.688" mm 3.005" mm 3.930" mm 3.005" mm 3.930" mm E E " mm 1.500" mm 2.688" mm 1.985" mm E " mm 3.005" mm Part Number Material Style overed Pins E arbon Steel Modified No No E arbon Steel Standard No Yes E arbon Steel Standard Yes Yes imensions Part Grade E GM Ø mm (.50") 6.35 mm (.25") E SR Ø mm (.50") 6.35 mm (.25") 3.18 mm (.125") Ø mm (2.74") E SR Ø mm (.50") 6.35 mm (.25") 3.18 mm (.125") Ø mm (2.90") E SR Ø mm (.50") 6.35 mm (.25") 6.35 mm (.25") Ø mm (3.00") 92 mm diameter (3.625") blanks with or without boss Maximum finish of Ø 68 mm (2.677") 10 POO GRPHITE, IN.
11 Size 4 ⅜" x ¼" with Fixed.984" mm 2.688" mm 1.985" mm 1.625" mm 1.500" mm.937" 2.688" mm 1.985" mm E " mm 4.690" mm E " mm 4.689" mm Part Number Material Style overed Pins E arbon Steel Standard No Yes E arbon Steel Standard Yes Yes imensions Part Grade E GM Ø mm (.50") 6.35 mm (.25") E GM Ø mm (.50") 6.35 mm (.25") 3.18 mm (.125") Ø mm (3.55") mm diameter (4.375") blanks with or without boss Maximum finish of Ø 87 mm (3.425"). Repair Kits and Parts E E E E Standard, ouble Stacked, Extended, Modified, Lightweight Part Number escription Quantity E Slot head screw 100 Phillips head screw 100 Lock washer 100 Spring clip 100 E Spring clip 200 E Socket head screw 50 Serrated washer 50 Spring clip 50 E lignment pins 100 POO GRPHITE, IN. 11
12 Repair Kits and Parts E ual Function (PR-2) Part Number escription Quantity E Slot head screw 150 Serrated washer 150 Side spring clip 100 ack spring clip 50 E E Side Mount Part Number escription Quantity E Slot head screw 100 Phillips head screw 100 Lock washer 100 3/16" ball " flat spring 100 E Slot head screw 50 Serrated washer 50 3/16" ball " flat spring 50 E E Interior Spring (ILS-1) Part Number escription Quantity E Stainless steel cover 1 E Stainless steel spring 1 For More Information Please call your Regional ustomer Service Representative or istributor today to learn what POO's GLSSMTE products can do for you. Visit and select the ontacts link for the location nearest you. POO, ILS-1 and GLSSMTE are trademarks of Poco Graphite, Inc. POO GRPHITE, SRL 1 rue des Vergers Limonest, France ustomer Service Tel. +33 (0) ustomer Service Fax +33 (0) Poco Graphite, Inc. ll rights reserved GL
Head office. Sales offices. ISRAEL NOGA Engineering Ltd. Tel: Fax:
C A T A L O G Head office ISRAEL NOGA Engineering Ltd. Tel: 972-4-9808080 Fax: 972-4-9808638 noga@noga.com www.noga.com Sales offices ISRAEL NOGA Tools Tel: 972-9-835-3243 Fax: 972-9-835-3307 nogatools@nogatools.co.il
More informationSECTION CONTENTS COMPUTER BRACKETS COMPUTER BRACKET WORKSHEET MOUNTING BRACKETS
PC BOARD HARDWARE SECTION CONTENTS COMPUTER BRACKETS........... 123-125 COMPUTER BRACKET WORKSHEET. 126-127 MOUNTING BRACKETS................ 118-119 PC BOARD ACCESSORIES Board Guides..........................
More informationBelleville Spring Washer Series
Belleville Spring Washer Series High Load in Small Spaces VARIOUS CONFIGURATIONS OF BELLEVILLE WASHERS Single ONE WASHER Parallel ALL WASHERS STACKED THE SAME WAY Series ALL WASHERS STACKED OPPOSITE EACH
More informationTV & Office Solutions by equip solutions with a high value of benefit
TV & Office Solutions by equip solutions with a high value of benefit The brand equip stands for a product development driven by quality management and continuous adjustments to the requirements of the
More informationcpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies
cpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies IEEE 1101.10 and PICMG 2.0 Compliant Compact size and unique aesthetics Innovative positive locking, simple push button
More informationTECHNICAL DATA SHEET -
TECHNICL DT SHEET - Universal Vector Pro II Projector mount page 1 of 5 MODELS:,, The Universal Vector Pro II features a sleek, low profile design, a ball and socket design for multidirectional positioning
More informationTitan Media Cart. Installation and Operation Manual
Titan Media Cart Installation and Operation Manual Table of Contents INTRODUCTION SERVICE AND SUPPORT... 1 PRODUCT RETURNS... 1 UNPACKING... 1 TITAN SINGLE MEDIA CART... 2 TITAN DUAL MEDIA CART... 2 BEFORE
More information1 5 / 8" 7 /8" 2" 7 /8" 75. 3" 7 /8" 75 Polyurethane HI-TECH Delrin / /16 3/4
For use on wood furniture that can accept a 3 /8" diameter hole approximately 1 5 /8" deep. No.20 pressed steel adapter (Part #50011) with toothed base is supplied. size: 5 /16" diameter x 1 1 /2" long.
More informationDual rod cylinder with guide function for pick & place applications.
ual Rod ylinder Series XS ø, ø, ø, ø, ø, ø32 ual rod cylinder with guide function for pick & place applications. Series XS Twice the thrust on-rotating accuracy ±. X TS Y Y G X - - ata all bushing bearings
More informationCROWN CLIP Series Sockets
OWN LIP Series Sockets Product Facts ompact design High performance OWN BND contacts urrents to 350 mps 1 Mates with solid or laminated blades Supports true hot-plug (current interruption)2 Float-mount
More informationAMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]
MPLIMITE Subminiature D Connectors Hardware Commoning Strip (for HDF-20 Plugs, Size 20 Pin Contacts) Brass,.004 [0.10] thick, tin plated Part No. 206918-2 (Continuous Strip) Used with HDF-20 Plugs page
More informationRound Louvers. Adapters for , 45, 47 & 86. XV.3. Air Distribution
Air Hose 23-0102 2 Low friction, non collapsible, sold in length of 47 (1200 mm) 23-0104 2.5 Low friction, non collapsible, sold in length of 47 (1200 mm) 23-0015 23-0020 23-0025 23-0035 23-0040 2 Collapsible
More informationRATHETING TAPS AND DIES SETS RATCHETING TAPS & DIES Pc. Ratcheting Tap and Die Set SAE
RATHETING TAPS AND DIES 82811-65 Pc. Ratcheting Tap and Die Set SAE 82800 Large Tap and Die Ratcheting T Wrench 82801 Large Locking Tap Adapter 82802 Large Hex Die Adapter 3881 Medium Tap and Die Ratcheting
More informationWORKSHOP EQUIPMENT. Engineers Stud. Flanged Nut. T-Slot Nut. Step Block. Extension Nut. Step Clamp
GROUP Indexa T-Slot Clamping Kits Designed to save set up time and solve most T-Slot clamping problems. All components are manufactured from S45C (JIS)/CK45 (DIN) grade non-alloy carbon steel, heat treated
More informationSensor Accessories Retroreflectors and Retroreflective Tape 8-2
-2 Retroreflectors and Retroreflective Tape PG.05E.17.T.E Retroreflectors ontents Overview.................... -2 Model Selection............... -3 Dimensions.................. -3 High Quality Retroreflectors
More informationSensor Accessories Retroreflectors and Retroreflective Tape Sensor Mounting Brackets Sensor Accessories. 52.
Retroreflectors Sensor Accessory AC Sensor Tester/Demonstrator Pilot Device E65 Control Unit.1 Retroreflectors and Retroreflective Tape Product............................................. 414 Application..........................................
More informationModel 720 Electromechanical Hour Meter
Model 720 Electromechanical Hour Meter A 5 figure (reset) or 6 figure (non-reset), AC hour meter encased in a rugged steel housing and designed to mil-spec environmental requirements. The non-reset models
More informationSpring Loaded Contacts
Spring Loaded Contacts Spring Probes ATE Test Probes Slim probes for automated testing Harwin supply a variety of Spring Probes, suitable for use on manual test jigs and automatic test equipment (ATE)
More informationRack Mount Interconnect Center (RIC3)
Rack Mount Interconnect Center (RIC) The RIC provides the best overall value for exceptional fiber management. The RIC enclosure offers superior fiber density (up to 88 fibers in just U) without sacrificing
More informationDisposable Glassware CO R N I N G A N D P Y R E X D I S P O S A B L E G L A S SWA R E D I G I TA L ST I R R I N G H OT P L AT E S...
Disposable Glassware and Equipment CO R N I N G A N D P Y R E X D I S P O S A B L E WA R E........................... 128 D I G I TA L ST I R R I N G H OT P L AT E S............. 135 Digital Stirring Hot
More informationSeries 801 Mighty Mouse Double-Start ACME Thread Receptacle
Series 0 Mighty Mouse ouble-start ACME Thread Receptacle 0-00 and 0-00 Ordering Information Series 0 Rear Panel Jam Nut Mount Shell Style 0 Square Flange Mount Shell Style 0// In-Line Shell Style 0 How
More informationHeat Containment System (HCS)
Heat Containment System (HCS) Revision Number 1 Wright Line LLC 160 Gold Star Boulevard Worcester, MA 01606 Tel: 800-225-7348 508-852-4300 Fax: 508-365-6178 www.wrightline.com info@wrightline.com All products
More information060-Hardware. Clamps and Brackets Hose Clamps
Hose Clamps Part No. Range 401-41904 7/32" - 5/8" 401-41906 7/16" - 25/32" 401-41908 1/2" - 29/32" 401-41910 9/16" - 1-1/16" 401-41912 11/16" - 1-1/4" 401-41916 13/16" - 1-1/2" 401-41920 13/16" - 1-3/4"
More informationxtablet T1600 Vehicle Holder Installation Guide
This document will step you through setting up the T1600 Vehicle Holder installation and tips for a safe, clean and long lasting installation. Preparing to Mount the Vehicle Holder Warning : Dock mounting
More informationCary Fiber Optic Probes
Cary Fiber Optic Probes Fiber Optic Probes Use With Cary 50/60 Wavelength range 200-1100 nm Cary 100/300 Cary 50/60/100/300 Cary 4000/5000/6000i Fiber optic dip probe stainless steel body only Requires
More informationMicroLab Posts, Bases, and Rails
MicroLab Posts, Bases, and Rails www.mellesgriot.com Stable mounting and positioning are required to build optical systems. In the laboratory, posts and post holders are commonly used for mounting optical
More informationA-dec 586 Ceiling Monitor Mount
Installation Guide A-dec 586 Ceiling Monitor Mount Recommended Tools 7/16" wrench Socket set and ratchet with 6" extension Phillips head and standard screwdrivers Diagonal cutters Level 3/8" drill with
More informationHD10 Series. Contents. HD10 Series Overview PG 74. Part Numbering System PG 74. Dimensions PG 74. Connector Styles PG 75
ontents H10 Series Overview PG 74 Part Numbering System PG 74 imensions PG 74 onnector Styles PG 75 onnector onfigurations PG 75 Special Modifications PG 75 ccessories PG 76-78 73 H10 Series Overview The
More informationFIBRE ENCLOSURES AND SPLICING ACCESSORIES
F/ F/ Assemblies, 8.0 W W W. S I E M O N. C O M SECTION CONTENTS Rack Mount Interconnect Centre.............. 8. 8. Wall Mount Interconnect Centre...............8. 8.5 F/ Mini Wall Mount Interconnect Centre...............8.5
More informationSECTION CONTENTS COMPUTER BRACKETS COMPUTER BRACKET WORKSHEET MOUNTING BRACKETS
PC BORD HRDWRE SECTION CONTENTS COMPUTER BRCKETS........... 123-125 COMPUTER BRCKET WORKSHEET. 126-127 MOUNTING BRCKETS................ 118-119 PC BORD CCESSORIES Board Guides..........................
More informationEDUCATIONAL SPECTROPHOTOMETER ACCESSORY KIT AND EDUCATIONAL SPECTROPHOTOMETER SYSTEM
GAIN 0 Instruction Manual and Experiment Guide for the PASCO scientific Model OS-8537 and OS-8539 02-06575A 3/98 EDUCATIONAL SPECTROPHOTOMETER ACCESSORY KIT AND EDUCATIONAL SPECTROPHOTOMETER SYSTEM CI-6604A
More informationQuick Coupling Products
Quick oupling Products Quick ouplings, Swivels, Valves, iagnostic Equipment atalog 3800 US February 2014 Quick oupling ivision Locations Grantsburg, WI hetek, WI Union ity, P FILURE OR IMPROPER SELETION
More informationPronto Air Personal Transporter
Parts Catalog Issued: Sep 20, 2018 Pronto Air Personal Transporter with MyBody Seating Parts Catalog Usage Guide The information contained in this document is subject to change without notice. This catalog
More informationPERFECT HANDLING. PCB Front Panels & Injector/Extractor Handles... Package Your Electronics With Ripac.
Front Panels & Injector/Extractor Handles... PERFECT HANDLING. Package Your Electronics With Ripac. When it comes to electronics, no one handles today s demanding applications better than Rittal Ripac
More information7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits
More informationMini Vortex Mixers Heavy-Duty Vortex Mixers Microplate Vortex Mixers Multi-Tube Vortex Mixers. Vortex Mixers
Mini Vortex Mixers Heavy-Duty Vortex Mixers Microplate Vortex Mixers Multi-Tube Vortex Mixers Vortex Mixers Mini Vortex Mixers Four Mini Vortex Mixer models for gentle to high-speed mixing are available.
More informationYOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND
- YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND MarStand Indicator Stands, Comparator Stands and Run out Testing Instruments offer high stablity which ensures precise measurements; regardless of whether
More informationRight Angle PCB Receptacle
Series 80 Series 80 Mighty Mouse ouble-start ACME Thread 80-0 Ordering Information connectors offer military grade performance in a small, lightweight package. These connectors are rated for MIL-ST-80
More informationPCB Hardware. Contents
PC Hardware Contents SMT Test Points SMT Cable Clips Coin Cell Holders SMT Jumper Links PC Jumper Links PC Terminals, Turret Lugs Spacers / Pillars / Standoffs SMT Hardware Test Points Ideal for use with
More informationCLAMPS & SUPPORTS CATALOG
ISO-900:2008 CLAMPS & SUPPORTS CATALOG Phone: 28 96 0900 Fax: 28 96 000 Email: sales@expotechusa.com Web: expotechusa.com 32 Cat. No. Page Cat. No. Page Cat. No. Page 07667... 6 03936... 2 038292... 0
More informationFibre Enlosures and Splicing
Fibre Enlosures and Splicing Siemon s fibre enclosures provide feature-rich and easily implemented options for managing critical fibre connectivity. With versions supporting up to 88 fibre ports, Siemon
More informationTV Brackets by equip The perfect solution to securely mount your TV
TV Brackets by equip The perfect solution to securely mount your TV No matter what s the size, if you want your TV in a fix position or want it to tilt, we have the solution you re been looking for. intro
More informationInvisible Hinges Page
Finish: Izerwaren Invisible Hinges Page -4-1-1 Seawater Resistant Satin nickel plated MINI INVISIBLE HINGES WITH STAINLESS STEEL PINS invisible hinge for minimum door thickness 1/2 Small Invisible Hinge
More informationHD10 Series. HD10 Series Overview HD P * XXXX. Part Numbering System. Dimensions. Cavity. Overall Length. Overall Length.
H10 Series H10 Series Overview The H10 is an environmentally sealed, thermoplastic cylindrical connector series and offers arrangements from 3 to 9 cavities. ll H10 connectors are available either in-line
More informationنﺎﻤﻟ آ ﻲﻧﺎﭙﻤﻛ يرﺎﺼﺤﻧا هﺪﻨﻳﺎﻤﻧ
ا زما صنعت گراد Mahr - your stable partner for manufacturing. Marstand. The latest information on MARSTAND products can be found on our website: www.mahr.com, WebCode 210 marstand Indicator Stands, Comparator
More informationPIONJÄR. Spare parts list. Petrol drills and breakers 120, 120 AV, 121 A, 130, 130 AV, 131 A
PIONJÄR 0, 0 AV, A, 0, 0 AV, A Spare parts list Petrol drills and breakers 0 Atlas Copco Construction Tools AB 00 00 0b 00 PIONJÄR 0, 0 AV, A, 0, 0 AV, A Contents Contents General Information................................................................
More informationT-Nuts St. Industrial Profile Systems Fasteners. Technical Data. Application. Ordering Information. Catalog /US T-Nuts
atalog 1816-3/US St Standard T-nuts conveniently roll into profile T-slots at any location. The spring/ball locking feature keeps the T-nut in place in vertical applications. Standard mounting elements
More information1.1. Cable Ties and Fixings Cable Ties Inside Serrated. UB-Series Cable Ties. Commercial Grade Cable Ties
1.1 Cable Ties Inside Serrated UB-Series Cable Ties Commercial Grade Cable Ties Cable ties fit for all purposes manufactured in PA66 material. A range of commercial grade cable ties Available in black
More informationSingle Slot SMT Connectors for Card-Bus Based PC Cards
Single Slot SMT onnectors for ard-us ased P ards I14 Series P ard Standard ompliant oard Space-Saving SMT Unit Guide Unit Secure board retention Features 1. Space-Saving design facilitates pattern routing
More informationzqsfp+ Behind Bezel Cage Assembly, Heat Sink, and Light Pipe
zqsfp+ Behind Bezel Cage Assembly, Heat Sink, and Light Pipe Application Specification 114-32023 02 MAR 12 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
More informationPrint Mechanism Maintenance Kit
Print Mechanism Maintenance Kit Installation Instructions This kit includes the parts and documentation necessary to install the print mechanism maintenance kit in the following printers: ZT0 ZT0 ZT0 Read
More informationLeg Systems & Fittings
Leg Systems & Fittings Product range: entre Pin Glides orner Plates Folding Legs Glides Height djusters Metal Height djusters Plastic Leg Plates Plastinails Single Wheel astors Table Legs Twin Wheel astors
More informationSH Series: DIN Rail Snap-Mount Sockets. SH1B Sockets " (17mm) Ø 0.140" (3.6mm) 2.613" (67mm) 0.63" 0.098" (16mm) (2.5mm) 0.
SH Series: Snap-Mount SH Series: Snap-Mount Sockets SH1B Sockets SH1B-05 5-blade, snap-mount/surface mount (Coil) M3 screws/(contact) M3.5 screws with captive wire clamp 250V, 10A SY2S-021 SA-101, SA-202
More informationTEMPERATURE RATINGS: Terminal Housing: 290 C (554 F) UL94VO Housing: 115 C (239 F) UL94VO
The KO4300 Series Enclosures feature high density double level terminals making them ideal for many electronic applications. They are small to medium in size ranging from 6 to 64 terminals. There are 4
More informationZB4BA73134 green flush/red projecting/green flush tripleheaded pushbutton Ø22 with marking
Characteristics green flush/red projecting/green flush tripleheaded pushbutton Ø22 with marking Main Range of product Product or component type Device short name Bezel material Mounting diameter Sale per
More informationSystem 64 Popout Locks. KeSet Popout Locks. List Prices. Effective February 6, TuBAR Cam Locks
System 64 Popout Locks List Prices Effective February 6, 2006 KeSet Popout Locks TuBAR Cam Locks escription : KeSet Locks Part number 1-99 100-499 500-999 1000+ Standard Cam Lock 1-1 /64 cylinder length
More informationEaton Heat Containment System (HCS) Installation Guide
Eaton Heat Containment System (HCS) Installation Guide Copyright 2011 Eaton Corporation, Worcester, MA, USA. All rights reserved. Information in this document is subject to change without notice. No part
More informationEVOLVE1-M MONITOR ARM
EVOLVE1-M MONITOR ARM EVOLVE1-M Rev A 2/17 Model EVOLVE1-M-SLV Model EVOLVE1-M-BLK Model EVOLVE1-M-WHT ASSEMBLY AND ADJUSTMENT EVOLVE1-M MONITOR ARM PARTS AND TOOLS PLEASE REVIEW these instructions before
More informationRider AMP TM. Parts Manual. Model In. S.D. Deck /09 Printed in USA
AMP TM Parts Manual Rider Model 900 -In. S.D. Deck 0800 /09 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide
More informationPELCO SEM Specimen Holders
PELCO SEM Specimen Holders The Modular Concept Hitachi JEOL FEI/Philips ZEISS/LEO TED PELLA, INC. Microscopy Products for Science and Industry The PELCO modular SEM specimen holder system offers the most
More informationSYSTEM 6 handles. SYSTEM 6 handles.
SYSTEM 6 handles. SYSTEM 6 handles. 284 Ergonomic multi-component handle with roll-off protection. With 6 mm hex retainer. Enables adjustable blade lengths from 42-114 mm. Versatile for general applications
More informationVERAK IP. 19 Stand Alone Cabinet with IP65 Rating.
19 Stand Alone Cabinet with IP65 Rating www.apw.eu.com Overview Material specification Frame: Steel 2.0 mm Panel mounting angles and reducing channels: Steel 2.0 mm Panel mount supports: Steel 1.5 mm Side
More informationMIRROR POLISHED POSTS See page 46
PRE-ASSEMBLED POSTS We now offer the largest range of pre-assembled posts from stock. Straight out of the box and ready to bolt down or side fix. See the following pages to find the most suitable design.
More informationDoor stopper, wall mounting 4-7 Door stopper, floor mounting 8-9. Door stopper, wall mounting 10 Door stopper, floor mounting 11
oor stopper : 8 Content oor stopper Seite Satin stainless steel oor stopper, wall mounting 4-7 oor stopper, floor mounting 8-9 Stainless Steel,black oor stopper, wall mounting 0 oor stopper, floor mounting
More informationAS&D Railing System Overview ACTUAL FREIGHT CHARGES WILL BE APPLIED TO ALL AS&D RAIL ORDERS
Ph: 1-800-335-5909 Fax 1-800-203-4495 www.absolutedist.com AS&D Railing System Overview AS&D Aluminum Rail with Cable Double Posts for Corners Over-the-Post Top Rail 3-3/16 Cable Spacing Rail Guidelines
More informationGround Power Modules. And Accessories For Healthcare Facilities. Technical Bulletin NAE /
2 Ground Power Modules And Accessories For Healthcare Facilities Technical Bulletin NAE2092320 / 10.2011 Ground Power Modules Hospital grade outlet modules Introduction BENDER series GPM ground and power
More informationArms, Brackets & Bars
3.0 Arms, Brackets & Bars 3 Generally used in conjunction with clamps and stands to provide precise positioning of lighting and lighting control equipment. The range includes the Magic Arm and the Variable
More informationINSTALLATION INSTRUCTIONS
Design and Assembly Envisor components are designed to function as an Equipment Screening System. Modular by Design allows for a more user-friendly installation. This instruction packet is intended to
More informationJuly Manual 10-slide disk outdoor viewer
Ing. J. de Wijs. Populierstraat 44, 4131 AR Vianen, the Netherlands Tel/Fax. +31 (0)347-372242 e-mail: info@dewijs-3d.com Website: www.dewijs-3d.com Design and production of stereoscopic instruments. July
More informationT E M P O S O N I C S I I I INSTALLATION
T E M P O S O N I C S I I I INSTALLATION A N A L O G O U T P U T W I R I N G - A N A L O G O U T P U T S 550572 B CONNECTORS RG Connector: Pin No. Wire Color Function 1 Gray Output #1 (Displacement) *
More informationGeneral Specifications
General Specifications Model PR10 Inductive Conductivity Retractable fitting On-line measurements often present extra challenges, especially when routine maintenance is required. The PR10 is ideally suitable
More informationT E M P O S O N I C S I I I INSTALLATION CAUTION! B. CONNECTORS RG Connector. D6 Connector: INTEGRAL CABLE P Integral Cable
T E M P O S O N I C S I I I INSTALLATION C A N B U S O U T P U T 550573 B W I R I N G - C A N b u s O U T P U T S CONNECTORS RG Connector Pin No. Wire Color Function 1 Gray CAN-L 2 Pink CAN-H 3 Yellow
More informationSection 9. Corporation EDI
Corporation Strip Socket Storage Racks See page 11 Stubby Clips See page 11 SAE 12-Point Socket Adapter Set See page 1 Reversible Ratcheting Kit See page 3 Empty Plastic Socket Holder See page 11 Section
More informationSystem Description. FINO Semiautomatic Stencil Printer Version 1.1 July 11 th Modification protocol Version
FINO Semiautomatic Stencil Printer Version 1.1 July 11 th 2012 Modification protocol Version Date Modification 1.00 29.05.2012 Release 1.01 11.07.2012 Dimension Drawings changed Essemtec AG Mosenstrasse
More informationHose Menders. We offer hose menders in a variety of materials to suit the products being conveyed. G20N NYLON HOSE MENDER
We offer hose menders in a variety of materials to suit the products being conveyed. Hose Part Hose PRICE EACH Pkg Part Hose PRICE EACH Pkg G20S PLATED STEEL HOSE MENDER G20S-038 3 8" $ 2.30 $ 2.10 5 G20S-050
More informationProduct catalogue. Aztec International S.A., ul. Bułgarska 63/65, Poznań, Poland, phone ,
Product catalogue Delivery Programme 2014 Status 02/2014 - Subject to change - Index Rail system... 4 Accessories mounting rails... 11 Rail connectors... 11 Cross connectors... 12 Module clamps... 13 Module
More informationBG 240. Spare parts list. Trowel. Valid from serial number Atlas Copco Construction Tools AB No c
BG 0 Spare parts list Trowel BG0 HSQP BG0 HSQP BG0 HSTP BG0 HSTP Valid from serial number BGB00000 BGB00000 BGF000000 BGF000000 0 Atlas Copco Construction Tools AB No. 900 0 0c 00 BG 0 Contents Contents
More informationThe new ABUS 83 Series
The new ABUS 83 Series Brass padlocks dominate both the Australian and New Zealand market places. For well over 50 years, the locksmiths commercial padlock of choice has been a 45mm brass bodied padlock.
More informationLH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
Forward and reversible plate Hatz Electric start 0 mm Hatz Electric start 0 mm Bio Hatz Electric start mm Bio Valid from serial number 0000 0000 0000 Contents Contents General information.....................................................................................................................................
More informationMultiPrep System. Fixture Catalog E. Pacifica Place Rancho Dominguez, CA /09, Version 6
MultiPrep System Fixture Catalog 2376 E. Pacifica Place Rancho Dominguez, CA 90220 310-635-2466 www.alliedhightech.com 05/09, Version 6 Allied s designs occasionally change and may differ from the rendering
More informationSingle action door patch fittings
Single action door patch fittings The flexible system for all installation situations. CONTENTS Technical details - 5 Materials and surface finishes Product information Patch fittings / none rebated frame
More informationTEX. Spare parts list 18PS 19PE 22PS 23PE 27PS 28PE. Handheld pneumatic breakers Atlas Copco Construction Tools AB No j
TEX 18PS 19PE 22PS 23PE 27PS 28PE Spare parts list Handheld pneumatic breakers 2010 Atlas Copco Construction Tools AB No. 9853 6035 90j 2010-02-19 TEX 18PS 19PE 22PS 23PE 27PS 28PE Contents Contents SPARE
More informationPRECISION MEASURING INSTRUMENTS
PRECISION MEASURING INSTRUMENTS STANDARD GAGE PROFESSIONNEL MEASURING INSTRUMENTS AFFORDABLE TO EVERYONE The instruments of the STANDARD GAGE product line were created to satisfy the clients on their query
More informationSockets. SY Series: DIN Rail Snap-Mount. F-14 USA: (800) 262-IDEC or (408) , Canada (888) 317-IDEC. SY4S Sockets SY4S-05
SY Series: DIN Rail Snap-Mount SY4S Sockets SY4S-05 Style Terminal Wire Size Electrical Rating Compatible Relay Compatible Timer Hold-Down Spring 14-blade, snap-mount/surface mount M3 screw with captive
More informationSR60 Busbar System 2/1 2/2. General Data. 2/3 Busbar routing. 2/7 Mounting components. 2/13 Accessories
/ SR0 Busbar System General Data / Busbar routing / Mounting components / Accessories / SR0 Busbar System General Data Overview The SR0 busbar system is a modular system for busbars, for installation in
More informationTemperature sensors and accessories for heat and cooling measurement points
Temperature sensors and accessories for heat and cooling measurement points Applications Temperature sensors are metrological components for heat or cold measuring points. They are used in pairs and measure
More informationand see how good you look! Dress it with a SIMCO housing 2004 PRODUCT SELECTION GUIDE FOR PLASTIC ENCLOSURES Handheld Cases Pocket Size Enclosures
Pocket Size Enclosures Handheld Cases Desktop Housings Utility Boxes Dress it with a SIMCO housing and see how good you look! 2004 PRODUCT SELECTION GUIDE FOR PLASTIC ENCLOSURES PRECISION ENCLOSURES TO
More informationBOARD LEVEL POWER SEMICONDUCTOR HEAT SINKS
217 SERIES Surface Mount D 2 PAK,, SOT-223, SOL-2 Compatible with surface mount technology (SMT) automated production techniques for ease of assembly and a variety of soldering methods, these heat sinks
More informationLH 700. Spare parts list. Forward and reversible plate. Valid from serial number. LH 700 Hatz Electric start 810 mm Bio
LH 00 Spare parts list Forward and reversible plate LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio LH 00 Hatz Electric start 0 mm LH 00 Hatz Electric start 0 mm Bio Valid from serial
More informationSeries 575. Vertical Flow Modular Softwall Cleanroom. Series 575 Vertical Flow Modular Softwall Cleanroom
Series 575 Vertical Flow Modular Softwall Cleanroom S O L U T I O N S The Series 575 softwall cleanroom is a cost-effective method of providing quality particulate control in a softwalled enclosure. The
More informationInductive sensor For rotary actuators NI4-DSU35TC-2Y1X2/S933
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationPRODUCT SPECIFICATIONS Pillar Table
PROUT SPIITIONS Pillar March 2017 Worksurfaces Standard worksurface tops are nominal 1 1 / 4 overall thickness with.030 thick high-pressure laminate top surface and.028 phenolic backer (bottom surface).
More informationRight angle press-fit D-Sub connectors
Right angle press-fit D-Sub connectors Version in Standard and in Eurostyle General The new generation of right angle D-Sub connectors with press-fit termination of the TMC series are according to DIN
More informationLaboratory Clamps and Supports
Laboratory Clamps and Supports Benchclamps 2 Laboratory Clamps Multi-Purpose Benchclamp Heavy-Duty Clamps grip adjustment range Single or dual adjust Available in three sizes; small, medium, and large
More informationLift Up Floor Locks Multi-Directional Castor. W Series. M Series (full stainless steel) WHEELS & CASTORS
Lift Up Floor s Multi-Directional Castor K Series M Series O Series M Series (full stainless steel) W Series WHEELS & CASTORS WWW.SITECRAFT.COM.AU WHEELS & CASTORS Lift Up Floor s Used on warehouse trolleys,
More informationPC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
More informationEpigap FAQs Part packges and form factors typical LED packages
3. packges and form factors 3.1. typical LED packages Radiation from LEDs is generated by a semiconductor chip mounted in a package. LEDs are available in a variety of designs significantly influencing
More informationSterilization Trays Containers Stringers
Sterilization Trays Containers Stringers 1-800-600-0428 Plastic Sterilization Trays Plastic trays are sterilizable by all standard methods - Autoclave/dry heat up to 360 F, ETO, and Cold Solutions. Stackable
More informationSpecifications. Safety Ratings. Standards. Safety Classification. Certifications. Outputs Safety Contacts Direct Opening Action. Operating Radius, Min
AUDIN - 8, avenue de la malle - 51370 Saint Brice Courcelles - Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr Safety Tongue Cadet 3 General 1-2-Opto-electronics
More informationISO RuggedEnclosure RUGGEDCOM REGISTERED
Enhanced Protection through the RuggedEnclosure The RuggedEnclosure is a tough, welded aluminum, hard mount enclosure built to house RuggedCom networking products and provide MIL-STD ratings for shock
More information