Stainle ss Ste e l Fit tings

Transcription

1 Stainle ss Ste e l Fit tings For the Sanitar y Industries Jensen Series Kwik-Clamp, tube butt weld, cme threaded and plain bevel-seat, and specialty end connections 0 and 6L stainless steel construction Polished and unpolished inside- and outside-diameter surface finishes Many - compliant configurations

2 Stainless Steel Fittings, Jensen Series Contents Sanitary Kwik-Clamp Fittings and 6L stainless steel Inside and outside diameters polished to µ (0.8 µm) maximum R a - compliant to sizes compatible with ISO 85 geometrical requirements Sanitary and Industrial ube utt Weld Fittings and 6L stainless steel Inside and outside diameters unpolished Inside and outside diameters polished to µ (0.8 µm) maximum R a Sanitary cme hreaded and Plain evel-seat Fittings and 6L stainless steel Inside and outside diameters polished to µ (0.8 µm) maximum R a - compliant Union nuts for easy assembly IG welded with no thinning or pitting at joint utt weld ends manufactured to exact circularity tolerances for ease of welding PV hreaded Fittings and 6L stainless steel Inside and outside diameters polished to µ (0.8 µm) maximum R a PV K-Clamp Fittings and 6L stainless steel Inside and outside diameters polished to µ (0.8 µm) maximum R a John Perry Fittings and 6L stainless steel Inside and outside diameters polished to µ (0.8 µm) maximum R a Interlock Fittings and 6L stainless steel Inside and outside diameters polished to µ (0.8 µm) maximum R a Sanitary Kwik-Clamp Flange to Swagelok ube Fittings L stainless steel ube fitting uses consistent geometry (instead of torque) for gaugeable make-up Easy to disconnect and retighten to size Kwik-Clamp fittings compatible with ISO 85 geometrical requirements Special lloy Fittings vailable on special order; contact your authorized Swagelok sales and service representative. Features Vacuum annealed, cold formed tubular fittings minimize likelihood of stress corrosion cracking olerances, angularity, squareness, ovality, and polish finishes monitored with statistical quality control 6L materials heat traceable on request Marked with heat number(s) and internal surface finish Documented with material test reports Gaskets and Clamps Standard and high-pressure 0 stainless steel clamps and una N, PFE, silicone, fluorocarbon FKM, EPDM, and other material gaskets are available. See the Swagelok ccessories for the Sanitary Industries catalog, MS End Connection Sizes Most end connections are available in to or 6 sizes. Select components are available in sizes down to / or up to Standard tube wall thicknesses are shown below. Nonstandard wall thicknesses are shown in fittings dimensions tables. End Connection Size, ube Wall / to and

3 Sanitary Kwik-Clamp Fittings ypical Ordering Number Stainless Steel Fittings, Jensen Series uild a sanitary Kwik-Clamp fitting ordering number by combining the designators in the sequence shown below. Material = 0 stainless steel 6 = 6L stainless steel Union nuts are 0 SS. JC 0 5 asic Ordering Number See tables below. st nd End Connection Size dd second designator for reducer and adapter fittings only. ube OD 8 = /8 ➀ = / ➀ 8 = /8 ➀ 50 = / 58 = 5/8 ➀ 75 = / 0 = 5 = / ➀ 5 = / 0 = 5 = / 0 = ➀ Used for adapters only. 0 = 60 = 6 80 = 8 00 = 0 0 = Ferrules and Caps utt Weld Ferrules Short utt Weld Ferrules asic Ordering Number: JCM7 ube OD, / / asic Ordering Number: JCX ube OD, / / / /, (mm). (8.).50 (8.).75 (.), (mm) 0.50 (.7) 0.6 (5.7) (9.0) (5.) ank utt Weld Ferrules Heavy-Wall ank Weld Ferrules asic Ordering Number: JC ube OD, / / Recessless Expansion Ferrules, (mm).00 (76.).00 (0) (5) asic Ordering Number: JCH ube OD ube Wall Dimensions, (mm) asic Ordering Number: JCEX ➀ (.).6 (9.5) / (.).68 (.7) (.).9 (55.6) / (.).7 (68.8) (6.0). (8.8) 0.. (5.8).6 (08) (8.) 6.6 (59) ➀ 6L SS only. ube OD,, (mm) ➀ 0.75 (9.0) /. (8.). (.) /.8 (5.). (6.6).50 (8.) ➀ 0 SS only.

4 Stainless Steel Fittings, Jensen Series Sanitary Kwik-Clamp Fittings Ferrules and Caps Solid End Caps asic Ordering Number: JC6 hermometer Caps asic Ordering Number: JC ube OD Dimensions, (mm) /➀ 0.9 (.8) 0.98 (.9) /➁ 0.5 (6.).98 (50.) 0.5 (6.).5 (6.0) / 0.5 (6.).05 (77.5) 0.5 (6.).58 (90.9) 0. (7.9).68 (9) 6 0. (.) 6.57 (67) 8 0. (.) 8.57 (8) ube OD ➀ /➁ ➀ apped / female NP. ➁ apped / female NP. Dimensions, (mm) ➁.5 (6.0) /➁ 0.6 (5.7).05 (77.5).98 (50.) ➁.58 (90.9) ➁.68 (9) (.7) 0.6 (69) 0.50 (.7).6 (0) ➀ Used for / and / fittings. ➁ Used for and / fittings. Elbows 90 Elbows 5 Elbows asic Ordering Number: JC ube OD,, (mm) asic Ordering Number: JCK ube OD,, (mm).00 (50.8). (8.) /.75 (69.8).50 (88.9) /. (6.6).75 (.) /.5 (08) /.06 (5.) 5.00 (7).8 (60.5) 6.6 (68). (79.) (67) 6.50 () cme hreaded and Plain evel-seat 90 Elbows asic Ordering Number: JC5 asic Ordering Number: JC ube OD Dimensions, (mm).9 (55.6).00 (50.8) /.97 (75.).75 (69.8).7 (9.5).50 (88.9) /.59 (7).5 (08) 5. (7) 5.00 (7) 7. (8) 6.6 (68) 90 Reducing Elbows asic Ordering Number: JC-J ube OD, Dimensions, (mm).00 (50.8) /.75 (69.8).00 (50.8) / /.75 (69.8).50 (88.9).00 (50.8) /.75 (69.8).50 (88.9) /.5 (08).00 (50.8) /.75 (69.8) Union nut is 0 SS..50 (88.9) /.5 (08) 5. (0) 5.00 (7)

5 Sanitary Kwik-Clamp Fittings ees Equal ees asic Ordering Number: JC7 Short Outlet ees Stainless Steel Fittings, Jensen Series 5 asic Ordering Number: JC7S ube OD,, (mm).8 (60.5) /.75 (69.8) /.50 (88.9).75 (95.).50 () (6) ube OD Dimensions, (mm).8 (60.5). (8.) /.75 (69.8).8 (5.0).50 (88.9).6 (.) /.50 (88.9).88 (7.8).75 (95.). (5.8).50 ().75 (69.8) (6).88 (7.) Reducing ees asic Ordering Number: JC7R ube OD, Dimensions, (mm) /.6 (5.9).75 (69.8) / 6. (5.8).56 (65.0) /. (6.).8 (60.5) /.8 (7.).66 (67.6).8 (7.).8 (60.5) /.9 (7.9).09 (78.5).06 (77.7) /.09 (78.5). (79.) /. (86.6).06 (0).56 (90.) / / / 5.75 (6).59 (9.) 5.50 (0) 5.5 () 5.50 (0) Short Outlet Reducing ees asic Ordering Number: JC7RS ube OD, Dimensions, (mm) /.6 (5.9).8 (5.) / 6 / / / / / / / /.56 (65.0).6 (.).8 (7.).88 (7.8).09 (78.5). (5.8).06 (0).6 (66.5) 5.75 (6).6 (9.9).75 (95.)

6 6 Stainless Steel Fittings, Jensen Series Sanitary Kwik-Clamp Fittings Crosses Equal Crosses Reducing Crosses asic Ordering Number: JC9 ube OD,, (mm).8 (60.) /.75 (69.8) /.50 (88.9).75 (95.).50 () asic Ordering Number: JC9R ube OD, Dimensions, (mm) /.6 (5.9).75 (69.8) / 6. (5.8).56 (65.0) /. (6.).8 (60.5) /.8 (7.).66 (67.6).8 (7.).8 (60.5) /.9 (7.9).09 (78.5).06 (77.7) /.09 (78.5) /. (86.6).06 (0).56 (90.) / / / 5.75 (6). (79.).59 (9.) 5.50 (0) 5.5 () 5.50 (0) Lateral Y and rue Y Fittings Lateral Y and Reducing Lateral Y asic Ordering Number: JC8 ube OD, C Dimensions, (mm) C / / / /.50 (8.).50 (88.9).5 (.8). (09).8 (85.9) /.8 (5.) 5.06 (9).00 (0).6 (.) 5.50 (0).50 () /. (5.8) 6.88 (75) 5.50 (0).50 (6.5) 8.5 (0) 7.00 (78).00 (76.) 0.0 (5) 8.75 () 6.75 (). (5) / / / / / / / / / / / / / / / / / /.5 (.8). (09).8 (85.9).8 (5.) 5.06 (9).00 (0).6 (.) 5.50 (0).50 (). (5.8) 6.88 (75) 5.50 (0).50 (6.5) 8.5 (0) 7.00 (78).00 (76.) 0.0 (5) 8.75 () rue Y asic Ordering Number: JC8 ube OD, / / /, (mm).50 (6.5).50 (88.9).50 () / 5.50 (0) 6.50 (65) 8.6 (9) ()

7 Stainless Steel Fittings, Jensen Series 7 Sanitary Kwik-Clamp Fittings Reducers Kwik-Clamp Concentric Reducer asic Ordering Number: JC Eccentric Reducer asic Ordering Number: JC Kwik-Clamp to hreaded evel-seat Concentric Reducer asic Ordering Number: JC-5 Eccentric Reducer asic Ordering Number: JC-5 ube OD, (mm) /.00 (76.) / 6 ube OD, 5.00 (7) /.00 (76.) 7.00 (78) / 5.00 (7).00 (76.) 9.00 (9) / 7.00 (78) 5.00 (7) /.00 (76.). () /. (8) 9. () / 7. (8) 5. (0) 7.5 (8) 5.8 (7) (mm) /.9 (8.0) / 5.9 () /. (8.8) / 5. (). (8.8) / 7. (8) 5. () /. (8.8) 9. (7) / 7.7 (90) 5.5 (0) Kwik-Clamp to Plain evel-seat Concentric Reducer asic Ordering Number: JC- Eccentric Reducer asic Ordering Number: JC- hreaded evel-seat to Kwik-Clamp Concentric Reducer asic Ordering Number: J5-C Eccentric Reducer asic Ordering Number: J5-C Plain evel-seat to Kwik-Clamp Concentric Reducer asic Ordering Number: J-C Eccentric Reducer asic Ordering Number: J-C ube OD, Union nut is 0 SS. (mm) /. (05) / ube OD, 6. (55) /. (07) / 6. (58). () 6. (6) /.66 (8) / 8.78 () 6.9 (76) (mm) /. (8.8) / ube OD, 5. () /. (8.8) / 5. (6). (8.8) 5. (7) /. (86.6) / 7.7 (96) 5.7 (5) (mm) / ➀. (8.8) / 5. () /. (8.8) / 5. (6). (8.8) 5. (7) /. (86.6) / 7.7 (96) 5.7 (5) ➀ Includes 0 SS union nut (not shown).

8 8 Stainless Steel Fittings, Jensen Series Sanitary Kwik-Clamp Fittings dapters Rubber Hose asic Ordering Number: JCHR Soft Plastic Hose asic Ordering Number: JCH Reducing sizes and sizes under are available in 6L SS only. ube OD / / Hose End Size /8 Dimensions, (mm) /8 0. (0.).50 (8.) / 0.5 (.5) 0.9 (.8) / 0.8 (7.) 5/ (6.8) / 0.78 (9.8) /8 0.9 (.8) / 0.8 (7.) /8 0. (0.).50 (8.) / 0.5 (.5) 5/ (6.8) / 0.78 (9.8).69 (.9).0 (6.) / /8 0.9 (.8) / 0.8 (7.) /8 0. (0.).50 (8.) / 0.5 (.5) 5/ (6.8) / 0.78 (9.8) /.8 (.5).69 (.9) /.5 (8.9) / 0.8 (7.) /8 0. (0.) /.50 (8.) 0.5 (.5) 5/ (6.8) / 0.78 (9.8).0 (6.).69 (.9) /.5 (8.9). (58.7).0 (5.6) /.00 (50.8).5 (6.).09 (78.5).0 (77.0). (86.6).0 (0) o order reducing adapters, add a second end connection size designator to the ordering number. Plain evel-seat Union nut is 0 SS. hreaded evel-seat ube OD, / / / /, (mm).50 ().6 (7) asic Ordering Number: JC7- ube OD, /, (mm).00 (76.) /.50 (88.9).75 (95.).00 (0) asic Ordering Number: JC7-5 ube OD,, (mm).69 (.9) /.7 (.7) /.8 (6.7).9 (8.5). (59.) rewery-style Long Rubber Hose asic Ordering Number: JCHR ube OD Dimensions, (mm).50 (88.9).0 (6.) /.50 (88.9).6 (.).50 (). (5.8) /.50 ().6 (66.5).50 (). (79.) 6.5 (59). (05)

9 Stainless Steel Fittings, Jensen Series 9 Sanitary Kwik-Clamp Fittings NP dapters Indicate Kwik-Clamp end connection size, then NP end connection size. Female NP Male NP asic Ordering Number: JC asic Ordering Number: JC Under and / to sizes Under sizes available in 6L SS only. ube OD / / NP Size (mm) /8.5 (.8) / /8 /.50 (8.) /.6 (.) /8.5 (.8) / /8 /.50 (8.) Under and / to sizes Under sizes available in 6L SS only. ube OD / / NP Size /8 / /8 / / /8 / /8 / / (mm).00 (50.8).00 (50.8) to sizes / /.6 (.) / / / /.6 (.).6 (.).5 (57.) /.69 (.9). (59.) to sizes / /.9 (55.6).5 (57.).6 (66.5) /.9 (55.6). (58.7) / /. (6.0).6 (66.5) / /.66 (.).7 (.7) /.7 (6.7).66 (67.6) /.09 (5.).9 (55.6) /.78 (70.6) /.8 (8.).66 (67.6).50 (88.9).8 (96.8)

10 0 Stainless Steel Fittings, Jensen Series Sanitary and Industrial ube utt Weld Fittings ypical Ordering Number uild a tube butt weld fitting ordering number by combining the designators in the sequence shown below. asic Ordering Number See tables below. Material = 0 stainless steel 6 = 6L stainless steel Surface Finish = Unpolished 7 = ID and OD polished to µ (0.8 µm) max R a J7WR 5 0 st nd End Connection Size dd second designator for reducers only. ube OD 50 = / 75 = / 0 = 5 = / 5 = / 0 = 5 = / 0 = 0 = 60 = 6 80 = 8 00 = 0 0 = Caps Elbows 5 Elbows 5 Short Elbows asic Ordering Number: J6W ube OD,, (mm) 0. (.) / 0.56 (.) 0.75 (9.0) /.06 (6.9). (8.).5 (.8) 6.5 (57.) asic Ordering Number: JKS ube OD,, (mm).9 (0.) /.6 (.). (58.7) /.00 (76.).69 (9.7).8 () asic Ordering Number: JKSX ube OD,, (mm) 0.6 (5.7) / 0.9 (.9).5 (.8) /.56 (9.6).88 (7.8).50 (6.5) 6.75 (95.) Elbows 5 Kwik-Clamp Elbows asic Ordering Number: JP asic Ordering Number: JKM 5 hreaded and Plain evel-seat Elbows asic Ordering Number: JK Union nut is 0 SS. ube OD Dimensions, (mm).9 (.0).69 (.9) /.6 (.). (5.8). (58.7).8 (7.) /.00 (76.).50 (88.9).69 (9.7).9 (06).8 () 5. (8) ube OD Dimensions, (mm).9 (0.).88 (7.8) /.6 (.). (59.). (58.7).0 (77.0) /.00 (76.).8 (97.5).69 (9.7).59 (7).8 () 6.0 (5)

11 Sanitary and Industrial ube utt Weld Fittings Elbows 90 Elbows ees Equal ees asic Ordering Number: JS ube OD,, (mm).06 (5.) /.9 (7.7).06 (0) / 5.9 () 6. (60) 8. () Stainless Steel Fittings, Jensen Series asic Ordering Number: J7W ube OD,, (mm).88 (7.8) /.5 (57.) /.00 (76.).5 (8.6).88 (98.6) (7) 90 Short Elbows asic Ordering Number: JSX Kwik-Clamp Outlet ees asic Ordering Number: J7WWM ube OD,, (mm).50 (8.) /.5 (57.) ube OD Dimensions, (mm). (8.).6 (.).00 (76.) /.75 (95.) /.66 (.).6 (5.9).06 (5.).56 (65.0).50 () /. (59.).8 (7.) 6.00 (5).59 (65.8).09 (78.5) (9). (87.).06 (0) 90 Kwik-Clamp Elbows 90 Plain evel-seat Elbows Union nut is 0 SS. asic Ordering Number: JCM ube OD asic Ordering Number: JF Dimensions, (mm).56 (65.0).06 (5.) /. (87.).9 (7.7).56 (6).06 (0) / 5.69 (5) 5.9 () 6.8 (7) 6. (60) 8.9 (7) 8. () ube OD Dimensions, (mm).75 (69.8).06 (5.) /.66 (9.0).9 (7.7).78 ().06 (0) / 6.0 (5) 5.9 () 7. (8) 6. (60) 9.5 () 8. () Reducing ees asic Ordering Number: J7WR ube OD, Dimensions, (mm) /.5 (57.). (5.8) / 6.8 (60.5).00 (76.) /.50 (6.5).75 (69.8) /.00 (76.).5 (8.6). (79.) /.00 (76.).5 (8.6).50 (88.9) /.5 (8.6) /.6 (9.9).88 (98.6).00 (0) /.75 (95.).75 () 5.00 (7).88 ()

12 Stainless Steel Fittings, Jensen Series Sanitary and Industrial ube utt Weld Fittings Crosses Equal Crosses Reducing Crosses asic Ordering Number: J9W ube OD,, (mm).88 (7.8) /.5 (57.) /.00 (76.).5 (8.6).88 (98.6) (7) asic Ordering Number: J9WR ube OD, Dimensions, (mm) /.5 (57.). (5.8) / 6.8 (60.5).00 (76.) /.50 (6.5).75 (69.8) /.00 (76.).5 (8.6). (79.) /.00 (76.).5 (8.6).50 (88.9) /.5 (8.6) /.88 (98.6).00 (0) /.6 (9.9).75 (95.).75 () 5.00 (7).88 () Lateral Y and rue Y Fittings Lateral Y and Reducing Lateral Y Lateral Y asic Ordering Number: J8W Reducing Lateral Y asic Ordering Number: J8WR ube OD, Dimensions, (mm) / / / /.00 (5.) 5.00 (7) /.9 (0.) 6.9 (57).6 (.) 7. (8) /.50 (8.) 8.50 (6).88 (7.8) 8.88 (6).06 (5.) 0.8 (7) 6.00 (0).5 (8) / / / / / / / / / / / / / / / / / /.00 (5.) 5.00 (7).9 (0.) 6.9 (57).6 (.) 7. (8).50 (8.) 8.50 (6).88 (7.8) 8.88 (6).06 (5.) 0.8 (7) rue Y asic Ordering Number: J8W ube OD, / / /, (mm).00 (50.8).00 (76.).00 (0) / 5.00 (7) 6.00 (5) (0)

13 Stainless Steel Fittings, Jensen Series Sanitary and Industrial ube utt Weld Fittings ube utt Weld Concentric Reducer asic Ordering Number: J Eccentric Reducer asic Ordering Number: J Reducers For unpolished reducers, add W to the basic ordering number. Example: JW ube OD, (mm) /.00 (50.8) / 6.00 (0) /.00 (50.8) 6.00 (5) /.00 (0).00 (50.8) 8.00 (0) / 6.00 (5).00 (0) /.00 (50.8).0 (05) / 0.0 (5) 8.00 (0) / 6.00 (5).00 (0) ➀.0 (56) /➀.0 (05) ➀ 0.0 (5) /➀ 8.00 (0) 6.00 (5).00 (0) ➀ Requires multiple stack components that may have different degrees of taper. Kwik-Clamp to ube utt Weld Concentric Reducer asic Ordering Number: JM Eccentric Reducer asic Ordering Number: JM ube OD, (mm) /.50 (6.5) /.50 () /.50 (6.5) 6.50 (65) /.50 ().50 (6.5) 8.50 (6) / 6.50 (65).50 () /.50 (6.5).6 (0) / 0.6 (9) 8.6 (9) / 6.6 (68).6 (7) Plain evel-seat to ube utt Weld Concentric Reducer asic Ordering Number: JP Eccentric Reducer asic Ordering Number: JP ube OD, (mm) /.69 (68.) /.7 (0) /.7 (69.) 6.8 (7) /.8 ().8 (7.) 8.9 (6) / 6.9 (76).9 (5) /.9 (7.9). (5) /. (8) 9. () / 7. (8) 5. ()

14 Stainless Steel Fittings, Jensen Series Sanitary and Industrial ube utt Weld Fittings dapters Rubber Hose Male Kamlock asic Ordering Number: WHR asic Ordering Number: J8W ube OD Dimensions, (mm).69 (.9).0 (6.) ube OD,, (mm) /.8 (5.).75 (.) /.69 (.9).5 (8.9) /.00 (50.8). (58.7).0 (5.6) /.00 (50.8).5 (6.).09 (78.5).0 (77.0). (86.6).0 (0) /.5 (57.).50 (6.5) Female NP Male NP asic Ordering Number: 6EF asic Ordering Number: J9W vailable only with ID and OD polished to 6 µ (.60 µm) R a ; no surface finish designator required. ube OD NP Size (mm).8 (5.) /. (.).75 (.) /.8 (6.0).5 (57.).8 (60.5) vailable only with ID and OD polished to 6 µ (.60 µm) R a ; no surface finish designator required. ube OD / NP Size (mm).75 (.).8 (6.0) /. (58.7).50 (6.5).56 (65.0) Flanges C 0.5 (.8) asic Ordering Number: J8W D dia, E number of holes vailable only with ID and OD polished to 6 µ (.60 µm) R a ; no surface finish designator required. Drilling and outside diameter meet SME 6.5 Class 50. ube OD Dimensions, (mm) C D E /➀.50 (88.9) 0. (7.9).8 (60.5) 0.6 (5.7) /➀.88 (98.6) 0.8 (9.7).7 (69.) 0.6 (5.7).5 (08) 0.8 (9.7). (79.) 0.6 (5.7) / 5.00 (7) 0.8 (9.7).88 (98.6) 0.6 (5.7) 6.00 (5) 0. (.).75 () 0.75 (9.0) / 7.00 (78) 0.50 (.7) 5.50 (0) 0.75 (9.0) 7.50 (90) 0.50 (.7) 6.00 (5) 0.75 (9.0) 9.00 (9) 0.50 (.7) 7.50 (90) 0.75 (9.0) 6.0 (79) 0.50 (.7) 9.50 () 0.88 (.) 8.5 () 0.6 (5.7).8 (00) 0.88 (.) (06) 0.88 (.). (6).00 (5.) 9.0 (8) 0.88 (.) 7.0 ().00 (5.) 8 ➀ 6L SS only.

15 Sanitary cme hreaded and Plain evel-seat Fittings ypical Ordering Number uild a fitting ordering number by combining the designators in the sequence shown below. Material = 0 stainless steel 6 = 6L stainless steel 0 5 asic Ordering Number See tables below. st nd Stainless Steel Fittings, Jensen Series 5 End Connection Size dd second designator for reducer and adapter fittings only. ube OD 75 = / 0 = 5 = / 0 = 5 = / 0 = 0 = Ferrules, Caps, Gaskets, and Nuts Short utt Weld Ferrules asic Ordering Number: WF asic Ordering Number: 5WF ube OD,, (mm) 0.69 (7.5) / 0.7 (8.) / 0.8 (.) 0.9 (.). (.0) utt Weld Ferrules asic Ordering Number: asic Ordering Number: 5 ube OD,, (mm).8 (5.) / /.50 (8.).75 (.) Plain ank utt Weld Ferrules asic Ordering Number: WL hreaded ank utt Weld Ferrules asic Ordering Number: 5WL ube OD,, (mm) ube OD,, (mm).00 (50.8).00 (50.8) /.5 (57.).50 (6.5) /.5 (57.).50 (6.5) /.75 (69.8) /.75 (69.8).00 (76.).00 (76.).00 (0).00 (0) Plain Heavy-Wall ank Weld Ferrules asic Ordering Number: W hreaded Heavy-Wall ank Weld Ferrules asic Ordering Number: 5W ube OD ube Wall Dimensions, (mm) (60.5).6 (9.5) ube OD ube Wall Dimensions, (mm) (8.).5 (.8) / (6.).68 (.7) / (.).75 (.) (70.6).9 (55.6) (.). (58.7) / (77.7).7 (68.8) / (.).88 (7.) (89.7). (8.8) (6.0).8 (85.9) 0.. (09).6 (08) (5.8).5 (08)

16 6 Stainless Steel Fittings, Jensen Series Sanitary cme hreaded and Plain evel-seat Fittings Ferrules, Caps, Gaskets, and Nuts Caps Solid Cap asic Ordering Number: 6 hermometer Cap asic Ordering Number: hreaded Hex Caps lind Hex Caps Not - compliant vailable in 0 SS only; includes chain (not shown). Not - compliant ube OD size tapped / female NP; / through size tapped / female NP. asic Ordering Number: 5 Dimensions, (mm) asic Ordering Number: (.9). (.) / 0.56 (.).8 (6.7) 0.6 (5.7).8 (60.5) / 0.66 (6.8).9 (7.9) 0.7 (8.). (87.) 0.8 (0.6).50 () ube OD,, (mm).00 (5.) /.06 (6.9). (8.) /.5 (.8).50 (8.) ube OD / Dimensions, (mm).5 (.8).00 (50.8).8 (.5).6 (66.6) /. (6.).00 (76.).50 (8.).00 (76.).6 (.).9 (06) Gaskets How to Order Select a basic ordering number and add an end connection size designator. Example: J0NH0 Union Nuts Union nut is 0 SS. luminum Wrenches Gasket Material una N White PFE asic Ordering Number: H ube OD Dimensions, (mm) 0.9 (.).8 (6.0) / 0.97 (.6). (6.).06 (6.9).00 (76.) /.9 (0.0).59 (9.).8 (.5).9 (06).50 (8.) 5. (8) Hex Size asic Ordering Number J0NH J0 Ordering Number 5H-0 / 5H-5 5H-0 / 5H-5 5H-0 5H-0

17 Stainless Steel Fittings, Jensen Series 7 Sanitary cme hreaded and Plain evel-seat Fittings Elbows 5 Plain to hreaded Elbows Union nut is 0 SS. 90 Elbows asic Ordering Number: C asic Ordering Number: F asic Ordering Number: P ube OD asic Ordering Number: E Dimensions, (mm). (5.8). (.) /. (5.8).7 (.7). (58.7). (5.8) /.56 (65.0).6 (66.5).9 (7.9). (79.).88 (98.6).5 (08) ube OD,, (mm).9 (55.6) /.97 (75.).7 (9.5) /.59 (7) 5. (7) 7. (8) ees hreaded Equal ees asic Ordering Number: 7 hreaded and hreaded to Plain Equal ees asic Ordering Number: 7X asic Ordering Number: 7X ube OD, asic Ordering Number: 7X Not - compliant, (mm).8 (6.0) /.8 (60.5).78 (70.6) /.9 (8.0).50 (88.9).66 (8) ube OD,, (mm).00 (50.8) /.88 (7.).7 (9.5) /.8 () 5.9 (50) 8.06 (05) Union nut is 0 SS. Union nut is 0 SS. 90 Reducing Elbows Concentric Reducer asic Ordering Number: F- Eccentric Reducer asic Ordering Number: F- ube OD, Dimensions, (mm) /.06 (5.).9 (55.6) /. (5.8).9 (55.6) /.88 (7.).97 (75.).6 (5.9).9 (55.6) /.9 (7.9).97 (75.).66 (9.0).7 (9.5). (56.).9 (55.6) /.97 (75.).97 (75.).7 (9.5).7 (9.5) /.7 ().59 (7). (58.7).9 (55.6) /.06 (77.7).97 (75.).9 (99.).7 (9.5) /.56 (6).59 (7) 5. (5) 5. (7)

18 8 Stainless Steel Fittings, Jensen Series Sanitary cme hreaded and Plain evel-seat Fittings ees hreaded to Plain ees asic Ordering Number: 7 Crosses Equal Crosses asic Ordering Number: 7 Union nut is 0 SS. ube OD asic Ordering Number: 9 Dimensions, (mm).8 (6.0).69 (68.) /.8 (60.5). (86.6).78 (70.6).8 (96.8) /.9 (8.0).5 (08).50 (88.9).6 (7).66 (8) 6. (55) ube OD,, (mm).8 (6.0) /.8 (60.5).78 (70.6) /.9 (8.0).50 (88.9).66 (8) Lateral Y and rue Y Fittings Lateral Y asic Ordering Number: 8 ube OD rue Y C Dimensions, (mm) C.5 (.8). (09).8 (85.9) /.8 (5.) 5.06 (9).00 (0).6 (.) 5.50 (0).50 () /. (5.8) 6.88 (75) 5.50 (0).50 (6.5) 8.5 (0) 7.00 (78).00 (76.) 0.0 (5) 8.75 () asic Ordering Number: 8 ube OD,, (mm).69 (9.7) /.7 (9.5).7 (0) / 5.8 (8) 6.9 (76) 9. () hreaded to Plain Crosses asic Ordering Number: 9 Union nut is 0-SS. ube OD Dimensions, (mm).8 (6.0).69 (68.) /.8 (60.5). (86.6).78 (70.6).8 (96.8) /.9 (8.0).5 (08).50 (88.9).6 (7).66 (8) 6. (55)

19 Stainless Steel Fittings, Jensen Series 9 Sanitary cme hreaded and Plain evel-seat Fittings Reducers hreaded and Plain to hreaded Concentric Reducer asic Ordering Number: Eccentric Reducer asic Ordering Number: ube OD, (mm) /. (88.6) / 5. (7) /. (87.) 7.5 (9) / 5.56 ().56 (90.) 9.59 () / 7.6 (9) 5.6 () /.75 (95.).9 (5) /.9 (0) 9.9 (5) / 8.06 (05) 6. (55) Plain and hreaded to Plain Concentric Reducer asic Ordering Number: -F Eccentric Reducer asic Ordering Number: -F Union nut is 0 SS. ube OD, (mm) /. (0) / 6. (6) /. () 8.7 (5) / 6.56 (67).75 () 0.5 (67) / 8.6 (9) 6.8 (7) / 5.06 (9).8 (76) /.9 (8). (8) / 9.8 (8) 7.5 (9) Concentric Reducer asic Ordering Number: -5F Eccentric Reducer asic Ordering Number: -5F Concentric Reducer asic Ordering Number: P Eccentric Reducer asic Ordering Number: P

20 0 Stainless Steel Fittings, Jensen Series Sanitary cme hreaded and Plain evel-seat Fittings dapters Rubber Hose asic Ordering Number: HR asic Ordering Number: 5HR rewery-style Long Rubber Hose asic Ordering Number: HR asic Ordering Number: 5HR ube OD Dimensions, (mm) o order reducing adapters, add a second end connection size designator to the ordering number. Example: HR05.69 (.9).0 (6.) /.69 (.9).5 (8.9). (58.7).0 (5.6) /. (59.).5 (6.).50 (88.9).0 (77.0).00 (0).0 (0) ube OD Dimensions, (mm).50 (88.9).0 (6.) /.50 (88.9).6 (.).50 (). (5.8) /.50 ().6 (66.5).50 (). (79.) 6.5 (59). (05) hreaded to Male NP Not - compliant Plain to Female NP Union nut is 0 SS. asic Ordering Number: ube OD / /➀ NP Size ➀ No hex centers. asic Ordering Number: -8 ube OD, (mm) /.9 (55.6).5 (57.) / /. (6.0) /.7 (6.7).66 (67.6).78 (70.6) /.8 (8.).50 (88.9).8 (96.8), (mm).75 (69.8) /.8 (7.).5 (8.6) /.56 (90.).00 (0). (09) Soft Plastic Hose asic Ordering Number: H asic Ordering Number: 5H Plain to Male NP Union nut is 0 SS. ube OD,, (mm).69 (9) /.7 (0) /.8 ().9 (5) 5. () o order reducing adapters, add a second end connection size designator to the ordering number. Example: H05 asic Ordering Number: -9 ube OD,, (mm). (79.) /.5 (8.6). (8.) /.00 (0).5 (08). (09) hreaded to Female NP Not - compliant asic Ordering Number: ube OD / /➀ NP Size ➀ No hex centers. (mm) /.6 (.).06 (5.) /.50 (6.5) /.5 (57.) /.66 (.). (59.).8 (6.7) /.09 (5.).9 (55.6).6 (66.5)

21 Stainless Steel Fittings, Jensen Series Sanitary cme hreaded and Plain evel-seat Fittings Reducing dapters Plain to Female NP Not - compliant asic Ordering Number: -8F Plain to Male NP Not - compliant asic Ordering Number: -9F ube OD NP Size (mm) ube OD NP Size (mm) Union nut is 0 SS. /.09 (0) / 6.09 (55) /.09 (0) / 6.6 (56).59 (7) 0 SS union nuts Included with / to and to / sizes. /.7 () / 6.7 (6) /.7 () / 6.59 (67).66 (8) 6.66 (69) /.7 (0) 6.7 (7) / 5.6 () / 9.0 (9) 7.7 (90) / 9.7 () 7.7 (96) ube ssemblies ssemblies asic Ordering Number: 7C asic Ordering Number: 7D asic Ordering Number: 7E ube OD Minimum Length, (mm) 7C 7D, 7E.8 (5.).88 (7.) /. (6.6). (79.). (6.6).8 (85.9) /.69 (.9).75 (95.).8 (6.0).88 (98.6). (6.0).6 (7) Reducing ssemblies Concentric asic Ordering Number: 7F Eccentric asic Ordering Number: 7G Concentric asic Ordering Number: 7H Eccentric asic Ordering Number: 7K ube OD Minimum Length, (mm) 7F, 7G 7H, 7K /.8 (5.).09 (78.5) /. (6.6).8 (8.) /.7 (7.).8 (85.9).7 (7.).56 (90.) /.50 (8.).66 (9.0).5 (8.9).78 (96.0) /.56 (9.6).88 (98.6) /.69 (.9).9 (99.).6 (.).8 (09) /.66 (.).8 () /.78 (5.). ().8 (6.7). ()

22 Stainless Steel Fittings, Jensen Series PV hreaded Fittings o order, use ypical Ordering Number instructions on page 5. See page 6 for union nut ordering number. Ferrules, Caps, and Gaskets Short hreaded utt Weld Ferrules asic Ordering Number: 5WXPV Short Plain utt Weld Ferrules asic Ordering Number: WXPV ube OD, /, (mm) 0.69 (7.5) 0.75 (9.0) / 0.8 (.) 0.9 (.).00 (5.) ube OD,, (mm) 0.6 (5.5) / 0.58 (.7) 0.66 (6.8) / 0.7 (8.) 0.78 (9.8) 0.8 (.) hreaded utt Weld Ferrules asic Ordering Number: 5PV Plain utt Weld Ferrules asic Ordering Number: PV ube OD,, (mm) ube OD,, (mm).6 (.).0 (.0) /.88 (7.8) /.77 (5.0).8 (60.5). (56.) /.6 (66.5) /.8 (60.5).88 (7.).56 (65.0).58 (65.5) Long hreaded utt Weld Ferrules asic Ordering Number: 5WLPV Long Plain utt Weld Ferrules asic Ordering Number: WLPV ube OD,, (mm) ube OD,, (mm).00 (50.8).9 (8.8) /.5 (57.) /. (5.).50 (6.5). (6.) /.75 (69.8) /.6 (66.5).00 (76.).88 (7.).00 (0).8 (97.) Plain Caps Gaskets asic Ordering Number: 6PV ube OD,, (mm) 0.0 (7.6) / 0. (0.7) / 0.7 (.9) Gray una N ube OD Ordering Number 0H-0 / 0H-5 0H-0 / 0H (.7) 0H (.5) 0H-0

23 Stainless Steel Fittings, Jensen Series PV hreaded Fittings Elbows ees 5 hreaded to Plain Elbows Equal ees asic Ordering Number: PPV ube OD Dimensions, (mm) asic Ordering Number: 7PV ube OD,, (mm).8 (6.0). (.).9 (55.6) /.7 (.7).9 (7.7) /.8 (60.5).78 (70.6) Union nut is 0 SS.. (5.8).75 (95.) /.6 (66.5). (6.) /.9 (8.0).50 (88.9). (79.).78 (70.6).66 (8).5 (08).50 (88.9) 90 Plain Elbows Union nut is 0 SS. asic Ordering Number: EPV ube OD,, (mm).09 (5.) /.8 (7.).66 (9.9) /.7 () 5.8 () 6.8 (7) hreaded to Plain ees Union nut is 0 SS. asic Ordering Number: 7PV ube OD Dimensions, (mm).8 (6.0).6 (66.) /.8 (60.5).0 (8.8).78 (70.6).7 (9.5) /.9 (8.0). (05).50 (88.9).50 ().66 (8) 5.95 (5) 90 hreaded Elbows asic Ordering Number: CPV ube OD,, (mm).9 (55.6) /.9 (7.7).75 (95.) /.59 (7) 5. (7) 7.00 (78) Crosses Equal Crosses asic Ordering Number: 9PV ube OD,, (mm).8 (6.0) /.8 (60.5).78 (70.6) /.9 (8.0).50 (88.9).66 (8) 90 hreaded to Plain Elbows asic Ordering Number: FPV Union nut is 0 SS. ube OD Dimensions, (mm).9 (55.6).00 (50.8) /.9 (7.7).88 (7.).75 (95.).7 (9.5) /.59 (7).8 () 5. (7) 5.9 (50) 7.00 (78) 8.06 (05)

24 Stainless Steel Fittings, Jensen Series PV K-Clamp Fittings o order, use ypical Ordering Number instructions on page 5. Ferrules, Caps, and Gaskets Elbows Short utt Weld Ferrules 5 Elbows asic Ordering Number: JX asic Ordering Number: JK ube OD, /, (mm) 0.69 (7.5) 0.75 (9.0) / 0.8 (.) 0.9 (.).00 (5.) ube OD,, (mm). (.) /. (5.8).00 (50.8) /. (6.).78 (70.6).50 (88.9) utt Weld Ferrules 90 Elbows asic Ordering Number: J ube OD,, (mm) asic Ordering Number: J ube OD,, (mm).8 (5.).9 (55.6) /.88 (7.8). (58.7) /.9 (7.7).75 (95.) /.50 (6.5) /.59 (7).69 (68.) 5. (7).75 (69.8) 7.00 (78) Long utt Weld Ferrules Solid Caps asic Ordering Number: J6 0.5 (6. mm) vailable in through sizes. asic Ordering Number: J ube OD, Gaskets Gray una N, (mm).00 (50.8) /.5 (57.).50 (6.5) /.75 (69.8).00 (76.).00 (0) ube OD Ordering Number 0H-0 / 0H-5 0H-0 / 0H-5 0H-0 0H-0 ees Equal ees Crosses Equal Crosses asic Ordering Number: J7 ube OD,, (mm).8 (6.0) /.8 (60.5).78 (70.6) /.9 (8.0).50 (88.9).66 (8) asic Ordering Number: J9 ube OD,, (mm).8 (6.0) /.8 (60.5).78 (70.6) /.9 (8.0).50 (88.9).66 (8)

25 John Perry Fittings Stainless Steel Fittings, Jensen Series 5 o order, use ypical Ordering Number instructions on page 5. See page 6 for union nut ordering number. Ferrules, Caps, and Gaskets Short hreaded utt Weld Ferrules asic Ordering Number: 5WFF ube OD, /, (mm) 0.6 (5.7) 0.75 (9.0) / 0.8 (.) 0.88 (.).06 (6.9) Solid Caps asic Ordering Number: 6JP ube OD Dimensions, (mm) 0.7 (.9). (8.) / 0.50 (.7).66 (.) 0.5 (.5).9 (55.6) / 0.6 (5.7).66 (67.6) 0.6 (5.7).9 (8.0) 0.6 (5.7).9 (06) Short Plain utt Weld Ferrules asic Ordering Number: WJP ube OD,, (mm) 0.69 (7.5) / 0.7 (8.) 0.8 (0.6) / 0.8 (.). (.0) Gaskets una N ube OD Ordering Number J0NJP0 / J0NJP5 J0NJP0 / J0NJP5 J0NJP0 J0NJP0 hreaded and Plain utt Weld Ferrules asic Ordering Number: 5FF asic Ordering Number: JP ube OD,, (mm).8 (5.) / /.50 (8.).75 (.)

26 6 Stainless Steel Fittings, Jensen Series Interlock Fittings o order, use ypical Ordering Number instructions on page 5. Ferrules, Caps, Gaskets, and Clamps Short Male utt Weld Ferrules asic Ordering Number: WI ube OD,, (mm) 0.59 (5.0) / 0.75 (9.0) 0.78 (9.8) / 0.8 (.) 0.9 (.).0 (6.) Short Female utt Weld Ferrules asic Ordering Number: 5WI ube OD,, (mm) 0.78 (9.8) / 0.9 (.9).0 (6.) /.6 (9.5). (.0). (.0) Solid Caps Male Cap asic Ordering Number: 6I-I Gaskets How to Order Select a basic ordering number and add an end connection size designator. Example: 0IN0 Clamps asic Ordering Number: IS Female Cap asic Ordering Number: 6I-5I Gasket Material una N White PFE asic Ordering Number 0IN 0I vailable in / to sizes; / clamp required for fitting.

27 Sanitary Kwik-Clamp Flange o Swagelok ube Fittings Stainless Steel Fittings, Jensen Series 7 C E minimum opening F flat G Options o order bored-through fittings, add to the ordering number. Example: SS-600-SC- o order fittings cleaned and packaged in accordance with Swagelok Special Cleaning and Packaging (SC-), MS-06-6, to ensure compliance with product cleanliness requirements stated in SM G9 Level C, add SC to the ordering number. Example: SS-600-SC-SC ube OD / /8 / Flange Size Ordering Number / SS-00-SC-8 / SS-00-SC- 0.6 (5.7).57 (9.9) SS-00-SC (.) Dimensions, (mm) C E F G 0.7 (9.) / SS-00-SC-.7 (.8) / SS-600-SC (9.) / SS-600-SC- 0.6 (5.7).6 (.) SS-600-SC (.) / SS-600-SC-.7 (.8) / SS-80-SC (9.) / SS-80-SC- 0.6 (5.7).7 (.) SS-80-SC (.) / SS-80-SC-.7 (.8) 0.60 (5.) 0.9 (.8) 0.66 (6.8) 0.8 (7.) 0.86 (.8) 0.7 (9.) 0. (0.) 0.98 (.9) /8.98 (50.) 0.98 (.9) /8.98 (50.) 0.98 (.9) /8.98 (50.) SS-60-SC-6.9 (8.5) 0.87 (.) 0.87 (.) /8.98 (50.).0 (6.) SS-60-SC-.9 (6.).87 (7.5) 0.88 (.) /.5 (6.0) Caution: Do not mix or interchange Swagelok tube fitting parts with those of other manufacturers. Special lloy Fittings Many Jensen series machined fittings can be provided in alloy C-76, titanium, and alloy 6-moly on special order. Contact your authorized Swagelok sales and service representative for more information. Oxygen Service Hazards For more information about hazards and risks of oxygenenriched systems, see the Swagelok Oxygen System Safety technical report, MS-06-.

28 Safe Product Selection When selecting a product, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user. Warranty Information Swagelok products are backed by he Swagelok Limited Lifetime Warranty. For a copy, visit swagelok.com or contact your authorized Swagelok representative. Swagelok, Jensen M Swagelok Company 00, 00, 006 Swagelok Company Printed in U.S.., GLI June 006, R MS-0-05