Mesekon Oy Turku ISO 9001:2008, ISO :2005
|
|
- Kristopher Russell
- 5 years ago
- Views:
Transcription
1 Certificate No has granted this certificate as proof that the quality system of Turku complies with the requirements of the standard ISO 9001:2008, ISO :2005 Certification covers Contract manufacturer. The workshop manufactures of steel and special materials as well components as pre-assembled structures, including network and project management in Turku and Mynämäki. The certificate is issued on (first issue ). The certificate is valid until Tomi Kasurinen, Managing Director The certificate is valid on condition that the quality system of the organization remains in compliance with the aforementioned standard and the General Regulations ABC 200. The validity of the certificate can be checked on the Internet at ISO 9001 ISO P.O. Box 1000, Sörnäistenkatu 2 FI Helsinki, Finland Tel
2 Certificate Annex No Page 1 (1) Tierankatu 9 FI TURKU Scope of activity Type of product(s) Hitsatut ja koneistetut teräsrakenteet, offshore sekä painelaitteet Product standard(s) EN 12952, EN12953, EN 13445, EN 13480, NORSOK Parent material group(s) (CEN ISO/TR 15608) 1.1, 1.2, 2.1, 2.2, 5.1, 8.1 Welding and allied process(es) 111, 121, 131, 135, 136, 141 ja 15 Responsible welding coordinator(s) Tero Nättiaho IWE Kari Rantanen IWS P.O.BOX 113, Porkkalankatu 13 G FI Helsinki, Finland Tel Fax
3 CERTIFICATE OF CONFORMITY OF THE FACTORY PRODUCTION CONTROL 0416-CPR In compliance with Regulation 305/2011/EU of the European Parliament and of the Council of 9 March 2011 (the Construction Products Regulation or CPR), this certificate applies to the construction product Structural welded steel components and kits Execution classes EXC1, EXC2 and EXC3 Declaration of essential characteristics ZA.3.4 (Method 3a) Responsible welding coordinator Mr Tero Nättiaho, IWE FI 00376, Level C produced by or for Tierankatu 9, TURKU, FINLAND and produced in the manufacturing plant(s) Turku, Finland This certificate attests that all provisions concerning the assessment and verification of constancy of performance described in Annex ZA of the standard(s) EN :2009+A1:2011 under system 2+ are applied and that the factory production control fulfils all the prescribed requirements set out above. This certificate was first issued on and will remain valid as long the test methods and/or factory production control requirements included in the harmonised standard, used to assess the performance of the declared characteristics, do not change, and the product, and the manufacturing conditions in the plant are not modified significantly. The validity of the certificate can be checked on the Internet at notified body No 0416, has issued the certificate on Tomi Kasurinen, Managing Director P.O. Box 1000, Sörnäistenkatu 2 FI Helsinki, Finland Tel
4 Certificate No has granted this certificate as proof that the occupational health and safety system of Turku complies with the requirements of the standard OHSAS 18001:2007 Certification covers Contract manufacturer. The workshop manufactures of steel and special materials as well components as pre-assembled structures, including network and project management. The certificate is issued on The certificate is valid until Mikko Törmänen, Managing Director The certificate is valid on condition that the occupational health and safety system of the organization remains in compliance with the aforementioned standard and the General Regulations ABC 200. The validity of the certificate can be verified on the Internet at OHSAS P.O. Box 1000, Sörnäistenkatu 2 FI Helsinki, Finland Tel
5 WELDING WORKSHOP APPROVAL CERTIFICATE Certificate No: WWA00000E1 This is to certify: That Tierankatu Turku, Finland is approved for Welding in accordance with DNV GL rules for classification Ships has been approved for the following range of applications Pipelines Machinery Components Containers and the following particulars Auxiliary Machinery Units, Populsion Unit Bodies, EGS-System Components, Crane Booms, Fire Water Pumps, Manufacturer(s) approved by this certificate are accepted to deliver according to DNV GL, DNV and GL Rules. Welding supervisor: Deputy welding supervisor: Tero Nättiaho Kari Rantanen Issued at Hamburg on This Certificate is valid until DNV GL local station: Turku Approval Engineer: Gordon Stieb for DNV GL Thorsten Lohmann Head of Section Form code: WELD 201 Revision: Page 1 of 1 DNV GL DNV GL and the Horizon Graphic are trademarks of DNV GL AS.
6 Rolls-Royce Marine AS P.O. Box Ålesund Norway This is to certify Mesekon OY Vendor Number: is an approved supplier for Rolls-Royce Marine Scope of approval: Fabrication Issue date: 17. July 2015 Andrew Wall (Supplier Quality Executive) Certificate No.:
Welding Certificate TÜV SÜD
Welding Certificate TÜV SÜD-00064.2013.004 in accordance with EN 1090-1, table B.1, its hereby declared: The manufacturer has produced evidence that he fulfills the requirements of the European standard
More informationUSING STANDARDS TO ASSESS THE COMPETENCE OF CONFORMITY
Ref. Ares(2014)2675967-13/08/2014 EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Regulaty policy Regulaty Approach f the free movement of goods NOTE TO THE SENIOR OFFICIALS GROUP ON STANDARDISATION
More informationTYPE APPROVAL CERTIFICATE
TYPE PPROVL CERTIFICTE Certificate No: TE00000XZ Revision No: 1 This is to certify: That the Converter with type designation(s) Vacon 100 series, Issued to Vacon Ltd VS, Finland is found to comply with
More informationGdańsk, DECEMBER 2017
Principles of using management systems certification marks December 2017 were approved by the Manager of the Management Systems Certification Bureau of Polish Register of Shipping on 1 December 2017. On
More informationMarket Survey. Technical Description Dismantling and Supply of Electrical Overhead Travelling (EOT) Cranes with a capacity up to 10 Tonnes
EDMS No. 1995140 Group Code: EN-HE Market Survey Technical Description Dismantling and Supply of Electrical Overhead Travelling (EOT) Cranes with a capacity up to 10 Tonnes Abstract This Technical Description
More informationList of forms CLAP/WGP by subject /68/UE
List of forms CLAP/WGP by subject - 2014/68/UE Subject Assembly - Assembly including an item of pressure equipment placed on the market before 29 May 2002 in compliance with national pre-ped regulations
More informationTesting and Certification Procedure
A PM 101E April 2011 Guideline for the Testing and Certification Procedure of the VDE Testing and Certification Institute (VDE Institute) (For information purpose only. In any case the German version shall
More informationManufacturer certification in plant, metal and rolling-stock engineering
Manufacturer certification in plant, metal and rolling-stock engineering To ensure you meet the highest quality standards. TÜV SÜD Industrie Service GmbH Be prepared for going global In the course of globalisation,
More informationReport. Certificate M6A SIMATIC S7 Distributed Safety
Report to the Certificate M6A 17 05 67803 014 Safety-Related Programmable Systems SIMATIC S7 Distributed Safety Manufacturer: Siemens AG DF FA AS Gleiwitzer Str. 555 D-90475 Nürnberg Revision 3.1 dated
More informationPRODUCTION QUALITY ASSURANCE CERTIFICATE. Initial date: 26 May, 2015
DNV GL PRODUCTION QUALITY ASSURANCE CERTIFICATE Certificate No.: 12403-2018-CE-USA-ACCREDIA This certificate consists of 2 pages Initial date: 26 May, 2015 Valid: 14 May, 2018-13 May, 2021 This is to certify
More informationFIRE SAFETY GUIDELINES
FSG 1:2013 FIRE SAFETY AND SHELTER DEPARTMENT SINGAPORE CIVIL DEFENCE FORCE FIRE SAFETY GUIDELINES FSG 1:2013 CERTIFICATION OF REGULATED FIRE SAFETY PRODUCTS & MATERIALS (REVISED PROCEDURES) Effective
More informationProt. DC2018SSV120 Milano, To all Certification Bodies (CBs) with OH&S accreditation. To the associations of Conformity Assessment Bodies
Prot. DC2018SSV120 Milano, 22-03-2018 To all Certification Bodies (CBs) with OH&S accreditation To the associations of Conformity Assessment Bodies Subject: Department of Certification and Inspection informative
More informationRegistration of a Request Ungraded
18 It is recommended to enter the internal reference number of your company first. This could be a works order- or project number or something similar. Please enter this information without spaces. But
More informationScheme Document. For more information or help with your application contact BRE Global on +44 (0) or
Page: Page 1 of 15 1. Introduction This certification scheme has been designed to promote sustainable production of construction products and materials. Responsible sourcing includes organisational management,
More informationMarks associated with TUV SUD BABT Certification Schemes
TUV SUD BABT is a certification body of TUV SUD BABT 2017 BABT_AP014.docx Page 1 of 11 Contents 1. Introduction... 3 2. Definitions... 3 3. Overview of Schemes and Associated Marks... 3 4. Accreditation
More informationSPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS
BELAC 2-405-FSMS Rev 1-2017 SPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS The only valid versions of the documents of the BELAC management
More informationGUIDELINE. of the European Committee for Welding of Railway Vehicles (ECWRV) ( ) PART 1
GUIDELINE of the European Committee for Welding of Railway Vehicles (ECWRV) (2016-05-10) PART 1 Procedure for the application of EN 15085 and certification of welding manufacturers for welding railway
More informationNational Accreditation Scheme
National Accreditation Scheme Rules of Procedure on the Preparation of Accreditation Audit Cycle NAR-25 Edition 3 Version 1 Approved by: Csaba Bodroghelyi Deputy Director General Responsible for preparation:
More informationLL-C (Certification) Services Overview
LL-C (Certification) Services Overview Who is LL-C (Certification)? LL-C (Certification) is an international certification body operating in more than 40 countries with experience in the field. Provides
More informationDNV BUSINESS ASSURANCE
DNV BUSINESS ASSURANCE PRODUCTION QUALITY MANAGEMENT CERTIFICATE - EC Certificate No. 6139-2015-CE-USA-ACCREDIA This certificate consists of 3 pages. This is to certify that the quality management system
More informationContent of mandatory certificates
Chapter: 2.5.1 Conformity assessment procedures; General rules Text:... Key words: certificate, certificate of competence, 1. Purpose The purpose of this recommendation is to provide guidance on the minimum
More informationSolution Oil & Gas. tgood.com
Solution Oil & Gas tgood.com TGOOD Introduction TGOOD is the global leader in prefabricated electric power distribution solutions. It is the company that first comes to mind when cost-effective electric
More informationAccreditation programme for management systems certification bodies NAR IRT Edition 2
Accreditation programme for management systems certification bodies NAR-01-04-IRT Edition 2 Approved by: Csaba Bodroghelyi Deputy Director General Responsible for preparation: Consistency of content reviewed
More informationBRE Global Limited Scheme Document SD 186: Issue No December 2017
BRE Global Limited Scheme Document SD 186: Issue No. 11.1 Commercial-in-Confidence Page 1 of 9 Introduction This certification scheme has been designed to promote the use of sustainable materials and
More informationGUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES
GUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES Table of Contents 1 PURPOSE... 2 2 GENERAL... 2 3 GUIDANCE AND INTERPRETATIVE DOCUMENTS... 2
More informationQUESTION / CLARIFICATION
QUESTION / CLARIFICATION CO-ORDINATION BETWEEN NOTIFIED BODIES DIRECTIVE 2008/57/EC AND SUBSEQUENT AMENDMENTS ON THE INTEROPERABILITY OF THE RAIL SYSTEM WITHIN THE UNION QC-INF-015 Issue 01 Date: 25/02/2015
More informationFCC Rules & Procedures. Roy Uggerud, Nemko Norway 25th January 2018
FCC Rules & Procedures Roy Uggerud, Nemko Norway 25th January 2018 Certification requirement Nearly every country requires certification before import and sale of the product 2 25.01.2018 FCC RULES & PROCEDURES
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA000016N This is to certify: That the Peripheral Equipment with type designation(s) JUMO mtron T Issued to JUMO GmbH & Co. KG Fulda Hessen, Germany is found
More informationPRODUCT CERTIFICATION SCHEME FOR CHILDREN TOYS
Ref No: RACS/PCS/22 Page 1 of 8 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Children Toys
More informationTYPE APPROVAL CERTIFICATE
Page 1 / 5 File number: ACI 4000/032/005 and 008 Product code: 5300H This certificate is not valid when presented without the full attached schedule composed of 7 sections www.veristar.com TYPE APPROVAL
More informationARTICLE 29 DATA PROTECTION WORKING PARTY
ARTICLE 29 DATA PROTECTION WORKING PARTY 18/EN WP261 Article 29 Working Party Draft Guidelines on the accreditation of certification bodies under Regulation (EU) 2016/679 Adopted on 6 february 2018 1 THE
More informationMarks Associated with TUV SUD BABT Certification Schemes
Marks Associated with TUV SUD BABT Certification Schemes TUV SUD BABT is a Certification Body of TUV SUD BABT 2018 BABT AP014 Page 1 of 11 Contents 1. Introduction...3 2. Definitions...3 3. Overview of
More informationINAB Mandatory and Guidance Documents Policy and Index
INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such
More informationDeclaration of performance (DOP)
Declaration of performance (DOP) 1. Unique identification code of the product-type: No. 9174 002 DOP 2013-06-17 Multi-wall chimney system type DW-KL according to 2. Type, batch or serial number or any
More informationRead Me First for the HP ProCurve Wireless Products - software ver
Read Me First for the Wireless Products - software ver. 2.1.0 This Read Me First provides information for the following products: Wireless Access Point 520wl (J8133A) 802.11a AP Kit 160wl - N America +
More informationGSG Towers Sp. z o.o. ul. Na Ostrowiu 15/20, Gdańsk, Poland and the sites as mentioned in the appendix accompanying this certificate
C ertificate N o: 2 4 1 628-2017-AQ-POL-RvA I nitial c ertification date: 2 9 M ay 2 009 V alid: 0 4 September 2 018-1 5 June 2020 This is to certify that the management system of GSG Towers Sp. z o.o.
More informationINAB Mandatory and Guidance Documents Policy and Index
INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such
More informationSpark Arrestors OCTOBER The electronic pdf version of this document found through is the officially binding version
STANDARD FOR CERTIFICATION No. 2.9 TYPE APPROVAL PROGRAMME 5-779.70-1 Spark Arrestors OCTOBER 2011 The electronic pdf version of this document found through http://www.dnv.com is the officially binding
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00000KD Revision No: 1 This is to certify: That the Electrical Measuring and Protection Relay with type designation(s) PPU-3, GPU-3 - Generator Controllers
More informationReport. Certificate M6A SIMATIC Safety System
Report to the Certificate M6A 067803 0019 Safety-Related Programmable Systems SIMATIC Safety System Manufacturer: Siemens AG Gleiwitzer Str. 555 D-90475 Nürnberg Revision 2.1 dated 2018-09-25 Testing Body:
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA000001M This is to certify: That the Peripheral Equipment with type designation(s) RS900-24, RS900-HI, RS900G-24, RS900G-HI, RSG2100 Issued to Siemens Canada
More informationProduct safety and quality. Edition 2 of the testing standards IEC/EN (VDE ) for lightning protection system components
Product safety and quality Edition 2 of the testing standards IEC/EN 62561 (VDE 0185-561) for lightning protection system components International overall provider for lightning and surge protection systems
More informationTimber Products Inspection, Inc.
Timber Products Inspection, Inc. Product Certification Public Document Timber Products Inspection, Inc. P.O. Box 919 Conyers, GA 30012 Phone: (770) 922-8000 Fax: (770) 922-1290 TP Product Certification
More informationEA-7/05 - EA Guidance on the Application of ISO/IEC 17021:2006 for Combined Audits
Publication Reference EA-7/05 EA Guidance on the Application of ISO/IEC 17021:2006 for Combined Audits PURPOSE This document has been prepared by a task force under the direction of the European Cooperation
More informationDCL PRODUCT CERTIFICATION
DCL PRODUCT CERTIFICATION ADDING CONFIDENCE TO GREEN BUILDING PRODUCTS AND MATERIALS 3 rd Annual Quality Assurance for Sustainable Construction Materials Conference and Workshop December 15-16, 2015 Abdulla
More informationAMENDMENT TO THE COMPULSORY SPECIFICATION FOR SWITCHES FOR FIXED INSTALLATIONS (VC 8003)
610 National Regulator for Compulsory Specifications Act (5/2008): Amendment to the Compulsory Specification for switches for fixed installations (VC 8003) 39220 DEPARTMENT OF TRADE AND INDUSTRY STAATSKOERANT,
More informationCSA STANDARDS W47.1, W47.2 & W186 CERTIFICATION GUIDE FOR APPLICANT COMPANIES TO. Congratulations and Welcome to the Certification Application Process
CERTIFICATION GUIDE FOR APPLICANT COMPANIES TO CSA STANDARDS W47.1, W47.2 & W186 Congratulations and Welcome to the Certification Application Process This guide will help you as an applicant company meet
More informationISO/IEC Conformity assessment Fundamentals of product certification and guidelines for product certification schemes
INTERNATIONAL STANDARD ISO/IEC 17067 First edition 2013-08-01 Conformity assessment Fundamentals of product certification and guidelines for product certification schemes Évaluation de la conformité Éléments
More informationRepublic of the Philippines Department of Transportation and Communications MARITIME INDUSTRY AUTHORITY STCW OFFICE
Republic of the Philippines Department of Transportation and Communications MARITIME INDUSTRY AUTHORITY STCW OFFICE STCW Circular No. 2016-08 TO: ALL SEAFARERS, MARITIME INDUSTRY STAKEHOLDERS, MARITIME
More informationThis is a preview - click here to buy the full publication. IEC Quality Assessment System for Electronic Components (IECQ System)
IECQ 03-3-1 Edition 1.0 2013-02 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Rules of Procedure Part 3-1: IECQ Approved Component Products, Related Materials &
More informationRULES ON THE USE OF SIRIM QAS INTERNATIONAL CERTIFICATION MARKS
RULES ON THE USE OF SIRIM QAS INTERNATIONAL CERTIFICATION MARKS These rules specify how SIRIM QAS International s certification marks shall be depicted and conditions relating to their use. A client whose
More informationRules for LNE Certification of Management Systems
Rules for LNE Certification of Management Systems Application date: March 10 th, 2017 Rev. 040716 RULES FOR LNE CERTIFICATION OF MANAGEMENT SYSTEMS CONTENTS 1. PURPOSE... 3 2. SCOPE... 3 3. DEFINITION
More informationDate yyyy-mm-dd binding declaration GASTEC QA GENERAL REQUIREMENTS
Date yyyy-mm-dd binding declaration GASTEC QA GENERAL REQUIREMENTS 253/160324 Foreword Kiwa These have been approved by the GASTEC QA Board of Experts, in which all relevant parties in the field of gas-related
More informationGuidelines 4/2018 on the accreditation of certification bodies under Article 43 of the General Data Protection Regulation (2016/679)
Guidelines 4/2018 on the accreditation of certification bodies under Article 43 of the General Data Protection Regulation (2016/679) Adopted on 4 December 2018 Adopted 1 Contents 1 Introduction... 3 2
More informationCertification Scheme
Certification Scheme Sustainable Biomass according to ISCC certification system (Edition: January 2017) DIN CERTCO Alboinstraße 56 12103 Berlin Tel: +49 30 7562-1131 Fax: +49 30 7562-1141 E-Mail: info@dincertco.de
More informationACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Various Accreditation Schemes ACCAB-ASM-7.0 CONTROLLED COPY Revision Number Revision
More informationConformity assessment
Training Course on Conformity and Interoperability, Tunis-Tunisia, from 22 to 26 May 2017 Conformity assessment Presented by: Karim Loukil & Kaïs Siala Page 1 Today s Objectives Present basic information
More informationTYPE APPROVAL CERTIFICATE
Page 1 / 5 File number: AP4795 Product code: 4440I This certificate is not valid when presented without the full attached schedule composed of 7 sections www.veristar.com This certificate is issued to
More informationGuidelines for Certification Symbol and Standard Mark Guidelines Valid from: 15/12/2014 Distribution: Internal & External
Guidelines for Certification Symbol and Standard Mark Guidelines Valid from: 15/12/2014 Distribution: Internal & External PREPARED BY: Head (MSCD) APPROVED BY: C.E.O PAGE : 1 OF 10 Table of Content 1.
More information-2-4. Application for certificate of production system standard under regulated criteria at certification bodies that registered with the Food and
(Unofficial) Announcement of the Food and Drug Administration Re: Application for Certificate of Production System Standards under Regulated Criteria ---------------------------------------------------
More informationDeclaration of performance (DOP)
Declaration of performance (DOP) 1. Unique identification code of the product-type: No. 9174 001 DOP 2013-06-17 Multi-wall chimney system type DW-FU according to 2. Type, batch or serial number or any
More informationPRODUCT CERTIFICATION AND CONFORMITY ASSESSMENT SCHEME GENERAL PRINCIPLES
Page: 1/18 Developed by: Jakub Dering Approved by: Przemysław Gałka 1. GENERAL INFORMATION Product Certification Bureau (CW) is an independent organizational unit in the structure of the Polish Register
More informationEurocode Basis of structural design
BRITISH STANDARD Eurocode Basis of structural design BS EN 1990:2002 +A1:2005 Incorporating corrigenda December 2008 and April 2010 ICS 91.010.30; 91.080.01 National foreword This British Standard is the
More informationThe Accreditation and Verification Regulation - Verification report
EUROPEAN COMMISSION DIRECTORATE-GENERAL CLIMATE ACTION Directorate A - International and Climate Strategy CLIMA.A.3 - Monitoring, Reporting, Verification Guidance Document The Accreditation and Verification
More informationS. Scholz / K. Meyer / J.E. Nielsen / Harald Drück/J.Fernández/E.Prado/L.Nelson Page 1 of 7
Global Solar Certification Network Working Rules Annex A. Requirements for Certification Bodies and their subcontracted laboratories, inspection bodies and inspectors Date: 2017/03/07 Document number:
More informationDeclaration of Performance (DOP)
Declaration of Performance (DOP) No. 9174 015 DOP 2018-01-08 1. Unique identification code of the product-type: Multi-wall chimney system type DW-ECO-TITAN according to 2. Type, batch or serial number
More informationTraining on ISO 45001:2018 and IAF MD22:2018 (Certification and accreditation for OH&SMS)
Training on ISO 45001:2018 and IAF MD22:2018 (Certification and accreditation for OH&SMS) hosted by the EA Secretariat, Buro Club Levallois-Perret (26 27 March 2018) (28-29 March 2018) Marco Cerri (ACCREDIA)
More informationSubmission of information in the public consultation on potential candidates for substitution under the Biocidal Products Regulation
Submission of information in the public consultation on potential candidates for substitution under the Biocidal Products Regulation Version 3.0 May 2017 2 Submission of information in the public consultation
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA00000AS Revision No: 3 This is to certify: That the Peripheral Equipment with type designation(s) UniOP(TM) etop Series 500 and 600 Issued to Exor International
More informationLL-C (Certification) Rule 03 CERTIFICATION PROCEDURE 1) MANAGEMENT SYSTEMS 2) PRUDUCTS, PROCESSES AND SERVICES. Czech Republic s.r.o.
Czech Republic s.r.o. Rule 03 CERTIFICATION PROCEDURE 1) MANAGEMENT SYSTEMS 2) PRUDUCTS, PROCESSES AND SERVICES Revision No. 20 from 06. 10. 2016 Owner and Publisher: Head of CB, MUDr. Michal Krutský Content
More informationTHE REPUBLIC OF LIBERIA LIBERIA MARITIME AUTHORITY
Office of Deputy Commissioner of Maritime Affairs THE REPUBLIC OF LIBERIA LIBERIA MARITIME AUTHORITY Marine Notice SEA-003 Rev. 09/08 TO: SUBJECT: ALL SHIPOWNERS, OPERATORS, MASTERS AND OFFICERS OF MERCHANT
More informationSINTEF Building and Infrastructure 1
SINTEF Building and Infrastructure 1 NorGeoSpec: Technical Seminar 2014 SINTEF Building and Infrastructure 2 CE marking: Geosynthetics and geosynthetic related products SINTEF Building and Infrastructure
More informationState of Conformity Assessment for Equipment Requiring Type Approval in Ethiopia
State of Conformity Assessment for Equipment Requiring Type Approval in Ethiopia ITU Regional Seminar for the Africa Region on Conformance and Interoperability Testing Centre(s) Accra (Ghana), 4-6 July
More informationAbu Dhabi Certification Scheme for Assistant Engineer Assessment and Surveillance Plan for Assistant Engineer
Abu Dhabi Certification Scheme for Assistant Engineer Assessment and Surveillance Plan for Assistant Engineer Issue: 1.0 Date: 21/01/2018 Total Number of Pages: 12 Table of Contents ABOUT THE ABU DHABI
More informationInterpretation document CPR
Interpretation document CPR RD_090, Issue 13 This guide describes the conformity assessment procedures and requirements for products under the scope of the Construction Products Regulation when placing
More informationCable entry systems for potentially explosive atmospheres
Cable entry systems for potentially explosive atmospheres Directive 94/9/EC (ATEX) ATEX stands for ATmosphère Explosible and is the short name for the European Directive 94/9/EC, regulating the market
More informationDeclaration of Performance T4305FPCPR
Declaration of Performance 1. Unique Identification code of the product-type: WM 660 GG, WM 660 SG, WM 660 S, WM 660 ALU GG, WM 660 ALU SG, WM 660 ALU S, FM D100 CB, FM D100 CB AluR. 2. Type, Batch or
More informationQuick Start M!DGE / MG102 Wireless Router 6/13/2017
6/13/2017 1. Welcome Thank you for buying M!DGE / MG102 Wireless Router from RACOM. Please read this Quick Start Guide carefully since it contains important security notes (section 2) and compliance information
More informationCertificate. Certificate number: Certified by EY CertifyPoint since: July 10, 2018
Certificate Certificate number: 2018-016 Certified by EY CertifyPoint since: July 10, 2018 Based on certification examination in conformity with defined requirements in ISO/IEC 17065:2012 and ETSI EN 319
More informationMarks associated with TÜV SÜD BABT Certification Schemes
Marks associated with TÜV SÜD BABT Certification TÜV SÜD BABT is a certification body of TÜV SÜD BABT 2012 Date:23 April 2012 Page 1 of 15 Contents 1. Introduction... 4 2. Definitions... 4 3. Overview
More informationAbu Dhabi Certification Scheme for Beauty Salon Sector
Abu Dhabi Certification Scheme for Beauty Salon Sector Hairstylist Assessment and Surveillance Plan for Beauty Salon Sector Hairstylist Issue: 1.0 Date: 27/11/2016 Total Number of Pages: 12 Table of Contents
More informationTYPE APPROVAL CERTIFICATE
TYPE APPROVAL CERTIFICATE Certificate No: TAA000011N This is to certify: That the Programmable Electronic System with type designation(s) HIMA HIMAX and Planar4 System Issued to HIMA Paul Hildebrandt GmbH
More informationIRONWORKER (GENERALIST)
IRONWORKER (GENERALIST) Occupation Description means a person who rigs, welds, burns, rivets, bolts, drills, fits and fabricates or otherwise handles structural shapes and plates in the erection, demolition,
More informationUL TYPE EXAMINATION CERTIFICATE Low Voltage Directive 2014/35/EU
00-IC-F0468 Issue #: 6.0_LVD Page 1/14 Applicant Manufacturer Product Sample Description WAAREE ENERGIES LTD 602, Western Edge-I, Off. Western Express Highway, Borivali(E), Mumbai 400066, Maharashtra,
More informationFOR REGISTRATION. Title of the Vendor M/s Mr. Mrs. Ms Company Dr. Advocate Name of the Firm (Max 40 digits) PEC Number Year of Registration Category
FOR THE FIELD OF INSTRUCTIONS 1. Use Capital Letters 2. Cross the applicable boxes 3. Use extra sheet, where necessary 4. Elaborate the entries, if marked OTHER 5. Attach photocopies of all relevant testimonials
More informationRECOMMENDATION FOR USE
Page 1 of 23 TITLE CONTENT OF EC CERTIFICATE/ QMS-APPROVAL/ ISV ORIGINATOR NB-RAIL SUB-GROUP STRATEGY SUBJECT RELATED TO DIRECTIVE 2008/57/EC (AS AMENDED BY 2009/131/EC, 2011/18/EU, 2010/713/EU, 2013/9/EU,
More informationCable Entry Systems for Potentially Explosive Atmospheres
Cable Entry Systems for Potentially Explosive Atmospheres Directive 94/9/EC (ATEX) KEL-ER KVT 80 ATEX stands for ATmosphères EXplosives and is the short name for the European Directive 94/9/EC, regulating
More informationIECEx International Certification: The way to safety compliance in hazardous areas IEC System for Certification to Standards Relating to Equipment
IECEx International Certification: The way to safety compliance in hazardous areas IEC System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres IECEx International Certification
More informationEGNOS and ESSP Certification. ESESA Aviation Workshop 26 th - 27 th October 2010
EGNOS and ESSP Certification ESESA Aviation Workshop 26 th - 27 th October 2010 Content 1. Certification needs and framework 2. SES Certification regulations 3. Certification activities 4. Current Status
More informationPOLICY FOR RENEWING A PRACTISING CERTIFICATE
POLICY FOR RENEWING A PRACTISING CERTIFICATE Policy for Renewing Practising Certificates Purpose To enable efficient, safe and consistent processing of renewal applications to the Occupational Therapy
More informationSources of Test Reports for TUV SUD BABT Product Certification BABT766. TUV SUD BABT is a certification body of. TUV SUD BABT 2015 Issue 7
BABT766 Sources of Test Reports for TUV SUD BABT Product Certification TUV SUD BABT is a certification body of TUV SUD BABT 2015 Page 1 of 5 Contents 1 Introduction... 2 2 Background... 2 3 General...
More informationEC-TYPE EXAMINATION CERTIFICATE (MODULE B)
EC-TYPE EXAMINATION CERTIFICATE (MODULE B) Certificate No: MEDB00000A6 Revision No: 6 Application of: Directive 2014/90/EU of 23 July 2014 on marine equipment (MED), issued as "Forskrift om Skipsutstyr"
More informationDEMOCRATIC SOCIALIST REPUBLIC OF SRI LANKA MERCHANT SHIPPING SECRETARIAT MINISTRY OF PORTS AND SHIPPING
DEMOCRATIC SOCIALIST REPUBLIC OF SRI LANKA MERCHANT SHIPPING SECRETARIAT MINISTRY OF PORTS AND SHIPPING 1 st Floor, Bristol Building, 43-89, York Street, Colombo 01, Sri Lanka. Telephone: +94(0)112435127,
More informationType Certification of Wind Turbines
DNV SERVICE SPECIFICATION DNV-DSS-904 Type Certification of Wind Turbines JANUARY 2014 The electronic pdf version of this document found through http://www.dnv.com is the officially binding version FOREWORD
More informationDOCUMENT NO. CSWIP-PED Requirements for the approval of NDT Personnel CERTIFICATION SCHEME FOR PERSONNEL. 2 nd Edition January 2011
CERTIFICATION SCHEME FOR PERSONNEL DOCUMENT NO. CSWIP-PED -2-01 Requirements for the approval of NDT Personnel 2 nd Edition January 2011 Issued under the authority of the Governing Board for Certification
More informationCompany Profile. The Approachable Certification Body
Company Profile The Approachable Certification Body Contents 1. Introduction of the Certification Body ISOQAR Ltd 3 2. ISOQAR Ltd History 4 3. ISOQAR in Cyprus and Greece 5 4. The ISOQAR' Approach 6 5.
More informationPEFC Norway Standard Document PEFC Norway ST 2002:2009 Issue
PEFC-Norge PEFC/03-1-01 Fremmer bærekraftig skogbruk - For mer info: www.pefc.org Our ref.: IKO - Oslo, 2009-10-15 PEFC09239 PEFC Norway Standard Document PEFC Norway ST 2002:2009 Issue 1 2009-10-15 PEFC
More informationGDPR AMC SAAS AND HOSTED MODULES. UK version. AMC Consult A/S June 26, 2018 Version 1.10
GDPR AMC SAAS AND HOSTED MODULES UK version AMC Consult A/S June 26, 2018 Version 1.10 INDEX 1 Signatures...3 2 General...4 3 Definitions...5 4 Scoping...6 4.1 In scope...6 5 Responsibilities of the data
More informationACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Various Accreditation Schemes ACCAB-ASM-7.0 CONTROLLED COPY Revision Number Revision
More informationAUDITOR / LEAD AUDITOR PHARMACEUTICAL AND MEDICAL DEVICE INDUSTRY
Requirement specification Certification of individuals: AUDITOR / LEAD AUDITOR PHARMACEUTICAL AND MEDICAL DEVICE INDUSTRY Requirement specification Auditor Lead Auditor rev 5.docx Page 1 1 Introduction
More information