DRT POWER SYSTEMS, LLC - SPACECRAFT 300 EAST STREET NEW HAVEN, CT 06511
|
|
- Phillip Tucker
- 5 years ago
- Views:
Transcription
1
2
3 American Systems Registrar, LLC, a provider of third-party system registration and accredited by the ANSI-ASQ National Accreditation Board under the Aerospace Registration Management Program, in accordance with SAE AS9104/1 ( ), attests that: 5281 Clyde Park Ave. SW, Suite 1 Wyoming, MI USA DRT POWER SYSTEMS, LLC - SPACECRAFT 300 EAST STREET NEW HAVEN, CT with a scope of: THE MANUFACTURING OF METAL PARTS FOR AIRCRAFT ENGINES AND OTHER MILITARY AND COMMERCIAL APPLICATIONS has established a quality management system that is in conformance with the International Quality System Standard AS9100C & ISO 9001:2008 ASR Certificate Number: 4889 Certificate Structure: Single Site Date of Certification: January 26, 2016 Date of Certification Expiration: September 15, 2018 Date of Initial Registration: November 16, 1999 Revision: Re-Issue Date: President CERTIFICATE OF REGISTRATION
4 Certificate of Registration This certifies that the Quality Management System of DRT Power Systems, LLC - Winsted 200 Price Road Winsted, Connecticut, 06098, United States has been assessed by NSF-ISR and found to be in conformance to the following standard(s): AS9100D with ISO 9001:2015 *Audited in accordance with AS9104/1:2012 Requirements for Aviation, Space, and Defense Quality Management System Certification Programs. NSF-ISR is accredited under the Americas Aerospace Quality Group Registration Management Committee. Scope of Registration: Machining services with product including, but not limited to, airfoils, blades, vanes, bosses and struts. Certificate Number: Certificate Decision/Re-Issue Date: Certificate Issue Date: Expiration Date *: 1Z831-AS15 09-AUG SEP SEP-2021 Carl Blazik, Director, Technical Operations & Business Units, NSF-ISR, Ltd.
5 ABS Quality Evaluations Certificate Of Conformance This is to certify that the Quality Management System of: DRT Power Systems, LLC - Agawam 325 Silver Street Agawam, MA U.S.A. has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: AS9100D:2016, EN9100D:2016, JISQ9100:2016 and ISO9001:2015 The Quality Management System is applicable to: MANUFACTURER OF PRECISION AEROSPACE AND COMMERCIAL MACHINED PARTS & ASSEMBLIES. The Certification has been assessed to and approved in accordance with the rqmts of AS9104/1:2012 by ABS QE, an accredited Aerospace Registration Mgmt. Prog. Certification Body, under the ICOP scheme. Certificate No: Certification Date: 04 August 2015 Effective Date: 03 August 2018 Expiration Date: 02 August 2021 Issue Date: 01 August 2018 Certification Structure: AS - Single Alex Weisselberg, President Validity of this certificate is based on the successful completion of the periodic surveillance audits of the management system defined by the above scope and is contingent upon prompt,written notification to ABS Quality Evaluations, Inc. of significant changes to the management system or components thereof. ABS Quality Evaluations, Inc Northchase Drive, Houston, TX 77060, U.S.A. Validity of this certificate may be confirmed at Copyright ABS Quality Evaluations, Inc. All rights reserved.
6 Tllls doeumo(ii is i...ed by Ille Con'!)any IAl)ICI lo ils Genera C0fldi1iolls of CertiJicatloo Sem:= ~ess.'11le Ill Atention Is dt'awo to Ille tlrrl!atioll$ of ial>ilitr, fooomoiblloo and Jurisdlciiooal issues es\aclshed t,ere,n. TheauClle116c!ly of tlia docunetltma, be vented a1 h!lp;/1"-sgs.com~a:id~lce!tiflehlieohiilecloly. My uoau:t,onzed ~ration, forgery Of falsilic;atloo of the e0111c111 Of appc01snce or INs dllcument ii unlaw!ul an~ ollendets may be prosecuted IO the ruitest -"""""" Certificate US15/ The management system of DRT Power Systems, LLC - Ronkonkoma 10 Colt Court Ronkonkoma, NY, 11779, United States has been assessed and certified as meeting the requirements of AS9100D / ISO 9001:2015 SGS performed this assessment in accordance with the requirements of AS9104/1:Rev 2012 and is accredited under the Aerospace Registrar Management Program and ICOP Scheme. The scope of registration is as follows: Precision Manufacturer for the machining, fabrication, and assembly of metal and composite components for commercial, military, and aerospace applications. Further clarifications regarding the scope of this certificate and the applicability of AS9100/ISO 9001:2015 requirements may be obtained by consulting the organization SGS This certificate is valid from 18 May 2018 until 17 May 2021 and remains valid subject to satisfactory surveillance audits. Recertification audit due a minimum of 60 days before the expiration date. Issue 2: 3 May 2018 Certified since 18 May 2015 The audit leading to this certificate commenced on April 2-6, 2018 Previous issue certificate validity date was until May 17, 2018 Authorized by: ACCRED I TED MANAGEMENT SYSTEMS CERTIACATION BODY Ralph Mclouth Vice President of Accreditation, North America SGS North America, Inc. 201 Roule 17 North, Rutherford, NJ 07070, USA t (201) f (201) WWW us sq, com This certificate remains the property of SGS and shall be returned upon request Page 1 of 1
7
8 American Systems Registrar, LLC, a provider of third-party system registration and accredited by the ANSI-ASQ National Accreditation Board under the Aerospace Registration Management Program, in accordance with SAE AS9104/1 ( ), attests that: 5281 Clyde Park Ave. SW, Suite 1 Wyoming, MI USA DRT POWER SYSTEMS, LLC EAST HARTFORD 221 BURNHAM STREET EAST HARTFORD, CT with a scope of: PRECISION MACHINING, MANUFACTURING, AND ASSEMBLY OF AEROSPACE COMPONENTS has established a quality management system that is in conformance with the International Quality System Standard AS9100D & ISO 9001:2015 ASR Certificate Number: 6399 Certificate Structure: Single Site Date of Certification: February 4, 2016 Date of Certification Expiration: February 3, 2019 Date of Initial Registration: April 18, 2011 Revision: Re-Issue Date: August 26, 2018 President CERTIFICATE OF REGISTRATION
9
Huber Engineered Materials ISO 9001:2008
Certificate US01/2693.00 The management system of Huber Engineered Materials 187 Gordon Street Fairmount, GA 30139, United States has been assessed and certified as meeting the requirements of ISO 9001:2008
More informationABS Quality Evaluations
This is to certify that the Health and Safety Management System of: HQ / Enterprise Operations 400 Collins Rd NE/MS 192-101 (WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ) has been assessed by ABS Quality
More informationStakeholder Rules: Rue Montoyer, 10 B-1000 Brussels, Belgium Telephone: Fax:
International Aerospace Quality Group (IAQG) Other Party Management Team (OPMT) Supplemental Rule 003 Rules for 9100/9110/9120:2016 and 9101:2016 Transition Dated: October 12, 2016, Revised December 12,
More informationDate 1. Each CB shall be fully transitioned for ISO 9001:2015 per IAF ID 9 and ANAB Accreditation Rule 20.
Issue: 350 Date: 2016/10/24 To: ANAB-Accredited and Applicant CBs and MS Accreditation Assessors From: Dale Gordon, Accreditation Manager, AS&D Re: Update on AQMS Standards Transition This is heads up
More informationBUSCHE PLANTS 2/3/ EAST STATE ROAD 8 ALBION, IN 46701
BUSCHE PLANTS 2/3/5 1563 EAST STATE ROAD 8 ALBION, IN 46701 with a scope of: MANUFACTURE OF MACHINED COMPONENTS AND ASSEMBLY American Systems Registrar issues this certificate and applicable appendices
More informationTraining and guidance on OASIS changes will be made available to affected stakeholders.
Purpose: Provide supplemental rules for all stakeholders to facilitate the transition to the 9100/9110/9120:2009 Aerospace Quality Management Systems (AQMS) standards, including use of the updated 9101:2009
More information1. All stakeholders shall ensure conformance to 9104 series of standards and the published timeline for 91XX:2009 transition as they apply.
Purpose: Provide supplemental rules for all stakeholders to facilitate the transition to the 91xx:2009 Aerospace Quality Management Systems (AQMS) standards, including the implementation of 9104/1 and
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Palindrome Technologies 100 Village Ct. Hazlet,
More informationCity: State: Zip: Phone: Fax: Fill in Method of Payment Purchase Order # Enclosed Check Money Order Enclosed Total Amount (US)
1 DAY ISO 9001-2015 TRAINING 8:30 AM - 4:30 PM Course Description Understanding the ISO 9001:2015 Standard: This day is designed to provide an understanding of ANSI/ISO/ASQ 9001:2015 quality management
More informationThe Role of the American National Standards Institute (ANSI) Irwin Silverstein, Ph.D. IPEA
The Role of the American National Standards Institute (ANSI) 1 ANSI Activities American National Standard: Excipient GMP Accreditation of Product Conformity Bodies Certification to Excipient GMP 2 IPEA
More information(R) Requirements for Aviation, Space, and Defence Quality Management System Certification Programs RATIONALE
AEROSPACE STANDARD Issued 4 December 2011 Superseding 9104 (2005-01) Technically equivalent writings published in all IAQG sectors. (R) Requirements for Aviation, Space, and Defence Quality Management
More informationNOTE: This includes Aerospace Auditors (AAs) and Aerospace Experienced Auditors (AEAs)
Purpose: Provide supplemental rules for all stakeholders to facilitate the transition to the 9100/9110/9120:2009 Aerospace Quality Management Systems (AQMS) standards, including use of the updated 9101.
More informationArcadia Aerospace Industries LLC. NonDestructive Testing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Arcadia Aerospace Industries LLC Mooney Avenue Bldg 110 Punta Gorda, FL 33982 United States This certificate
More informationTUV Rheinland of North America, Inc Massachusetts Avenue, Boxborough, MA 01719
CERTIFICATE TUV Rheinland of North America, Inc. 1300 Massachusetts Avenue, Boxborough, MA 01719 Hereby certifies that CIMCOOL INDUSTRIAL PRODUCTS, LLC 3000 Disney St. Cincinnati OH 45209 has established
More informationSQF Program. March 28, 2018
220 East Second Ave., P.O. Box 248 Selah, WA 98942-0248 p 509.697.7251 f 509.698.1460 treetop.com March 28, 2018 SQF Program The SQF Program is a leading, global food safety and quality certification program
More informationParkway Metal Products, Inc. ParkwayMetal.com
Parkway Metal Products, Inc. ParkwayMetal.com 847-789-4000 info@parkwaymetal.com Parkway Metal Products, Inc. Superior Metal Work Parkway Metal Products, Inc. specializes in precision sheet metal fabricating
More informationGlobal Wind Organisation CRITERIA S FOR THE CERTIFICATION BODY
Global Wind Organisation CRITERIA S FOR THE CERTIFICATION BODY CONTENTS PAGE Foreword 3 1. Introduction 4 2. Criteria for approval of Certification Body 4 3. Selection of audit team members certifying
More informationIAF Informative Document. Information on the Transition of Management System Accreditation to ISO/IEC :2015 from ISO/IEC 17021:2011
IAF Informative Document Information on the Transition of Management System Accreditation to ISO/IEC 17021-1:2015 from ISO/IEC 17021:2011 Issue 1 (IAF ID 11:2015) Issue 1 Information on the Transition
More informationManaging Risk through GFSI
Managing Risk through GFSI January 31, 2011 Robert Garfield Senior Vice President SQF Institute Discussion Points 1) Who is SQFI? 2) How SQFI operates 3) The SQF Codes 4) SQF Guidance a. Ethical Sourcing
More informationSCOPE OF ACCREDITATION NonDestructive Testing
Administered by PRI SCOPE OF ACCREDITATION NonDestructive Testing This certificate expiration is updated based on periodic audits. The current expiration date and scope of accreditation are listed at:
More informationGlobal Wind Organisation CRITERIA FOR THE CERTIFICATION BODY
Global Wind Organisation CRITERIA FOR THE CERTIFICATION BODY December 2015 (Version 3) 1 Contents 1. Introduction... 5 2. Criteria for approval of a Certification Body... 5 3. Selection of audit team members
More informationAQMS AUDITOR APPLICATION GUIDE
AQMS OR AUTHENTICATION BODY AQMS OR APPLICATION GUIDE PROBITAS AUTHENTICATION 10 27 2015 RA 002 AAA UG AQMS Auditor Application User Guide pg. 1 of 22 TABLE OF CONTENTS 1 Introduction... 2 2 Certification
More information1.0 TITLE: Auditing Procedure. 2.0 PURPOSE: To provide an outline and instructions on the GMCS auditing process of clients.
Page 1 1.0 TITLE: Auditing Procedure 2.0 PURPOSE: To provide an outline and instructions on the GMCS auditing process of clients. 3.0 RESPONSIBILITY: GMCS auditors and personnel are responsible for following
More informationInter American Accreditation Cooperation. IAAC, IAF and ILAC Resolutions Applicable to IAAC MLA Peer Evaluations
IAAC, IAF and ILAC Resolutions Applicable to IAAC MLA Peer Evaluations CLASSIFICATION This document is classified as an IAAC Mandatory Document. AUTHORIZATION Issue Nº: 07 Prepared by: MLA Committee and
More informationThis is a preview - click here to buy the full publication. IEC Quality Assessment System for Electronic Components (IECQ System)
IECQ 03-3-1 Edition 1.0 2013-02 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Rules of Procedure Part 3-1: IECQ Approved Component Products, Related Materials &
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Coherent LSM 27650 SW 95th Ave. Wilsonville,
More informationGLOBAL MANAGEMENT CERTIFICATION SERVICES PRIVATE LIMITED PROCEDURE
GLOBAL MANAGEMENT CERTIFICATION SERVICES PRIVATE LIMITED Document No. P-04 PROCEDURE Version. 2.00 Granting, Maintaining, Extending, Reducing, Date of Issue 04.04.2016 Reviewed & Approved By Name Designation
More informationCERTIFICATION GUIDELINES FOR MANAGEMENT SYSTEM
CERTIFICATION GUIDELINES FOR MANAGEMENT SYSTEM Table of Content 1.0 INTRODUCTION... 2 2.0 CERTIFICATION PROCESS... 2 3.0 SCHEDULE OF FEES... 3 4.1 CERTIFICATION REQUIREMENTS... 3 4.2 Eligibility criteria
More informationThe exida. IEC Functional Safety and. IEC Cybersecurity. Certification Programs
The exida IEC 61508 - Functional Safety and IEC 62443- Cybersecurity Certification Programs V1 R1 November 10, 2017 exida Sellersville, PA 18960, USA, +1-215-453-1720 Munich, Germany, +49 89 4900 0547
More informationAPPLICATION FOR AIR EMISSION TESTING BODY (AETB) ACCREDITATION
APPLICATION FOR AIR EMISSION TESTING BODY (AETB) ACCREDITATION Source Emission Measurement Quality Assurance Programs (SEMQAP) Stack Testing Accreditation Council (STAC) A. Purpose of Application: Mark
More informationC-BPVCA ADMINISTRATIVE PROCEDURES DELEGATED TO ASME CONFORMITY ASSESSMENT STAFF
PROCEDURES ISSUE 1, REVISION 10 C-BPVCA ADMINISTRATIVE PROCEDURES DELEGATED TO ASME CONFORMITY ASSESSMENT STAFF Approved by the Committee on Boiler and Pressure Vessel Conformity Assessment 9/11/2018 The
More informationFebruary 19 March 31 May 13 1) 2) 3) Phone: Fax: Alternate #: Purchase Order, or Check or Money Order
NEW 1 DAY ISO 9001-2015 TRAINING 2016 Winter/Spring Course Offering Description: This program is designed to introduce the quality management systems requirements for implementation to meet the requirements
More information2003/09/15-Original Date 2003/11/06-Revision 2005/01/03 Revision
Annex A Accreditation Body Parties to the MCAA 2003/09/15-Original Date 2003/11/06-Revision 2005/01/03 Revision ANSI-ASQ National Accreditation Board (ANAB) 600 N. Plankinton Avenue, Suite 300 P.O. Box
More informationSTEICO Industries Inc. Welding
In accordance with SAE Aerospace Standard AS7003, to the revision in effect at the time of the audit, this certificate is granted and awarded by the authority of the Nadcap Management Council to: United
More informationAsia
Administered by PRI July 21, 2011 Mr. Mike Hushek Quality Assurance Manager Dear Mike Hushek The report of the Nadcap accreditation audit of your facility on November 09 - November 12, 2010 has been approved
More informationHarris County Onsite Wastewater Seminar. NSF International 2015
Harris County Onsite Wastewater Seminar NSF International 2015 Accreditation vs. Certification defined Brief overview of NSF Purpose and Value of Technology Approval Certification Process Questions Accreditation
More informationIMPORTANT: PLEASE READ INSTRUCTIONS FIRST Deadline: January 31st (Annually)
Annual Lifeline Eligible Telecommunications Carrier Certification Form All carriers must complete all or portions of all sections Form must be submitted to USAC and filed with the Federal Communications
More informationCertificate of Conformity
Certificate of Conformity Registration No: P10341 Certificate No: AM310001 Productos del Mar Ventisqueros SA Chinquihue Km. 14 Puerto Montt Llanquihue Puerto Montt 5480000 Chile Planta Chincui Has satisfied
More informationGreen Squared Certification Manual
SCS Global Services Manual Green Squared Certification Manual Environmental Certification Services Division 2000 Powell Street, Ste. 600, Emeryville, CA 94608 USA +1.510.452.8000 main +1.510.452.8001 fax
More informationISO/IEC :2015 IMPACT ON THE CERTIFIED CLIENT
ISO/IEC 17021-1:2015 IMPACT ON THE CERTIFIED CLIENT P R E S E N T E D B Y S H A N N O N C R A D D O C K, P R O G R A M S & A C C R E D I T A T I O N S M A N A G E R TODAY S APPROACH What is ISO/IEC 17021-1:2015?
More informationIATF Transition Strategy Presenter: Mrs. Michelle Maxwell, IAOB
IATF 16949 Transition Strategy Presenter: Mrs. Michelle Maxwell, IAOB IATF 16949 Transition Strategy IATF 16949 transition strategy was presented at the IATF global stakeholder conference in Rome, Italy
More informationONC-ACB Certification Program
Gaming Laboratories International, LLC dba SLI Compliance (SLI) ONC-ACB Certification Program Document ID: ACB-Cert-Prog Issued: December 08, 2017 4720 Independence St. Wheat Ridge, CO 80033 303-422-1566
More informationIATF Transition Strategy Presenter: Cherie Reiche, IAOB
IATF 16949 Transition Strategy Presenter: Cherie Reiche, IAOB IATF 16949 Transition Strategy IATF 16949 transition strategy was presented at the IATF global stakeholder conference in Rome, Italy in April
More informationNZQA registered unit standard 8086 version 7 Page 1 of 5. Demonstrate knowledge required for quality auditing
Page 1 of 5 Title Demonstrate knowledge required for quality auditing Level 4 Credits 4 Purpose People credited with this unit standard are able to demonstrate knowledge of: quality auditing, preparation
More informationTRANSMITTED VIA ELECTRONIC MAIL, FACSIMILE AND COURIER
TRANSMITTED VIA ELECTRONIC MAIL, FACSIMILE AND COURIER 14 September 2012 Mr. Laurent Escart (IANA ID# 1378) 2, avenue des Deportes de la Resistance Aix-en-Provence 13100 France E- mail: laurent@hosteur.com
More informationRequirements for Aerospace Supplier Quality System Certification / Registration schemes for use by the IAQG Sectors
Final Version International Aerospace Quality Group IAQG Document 104 27 June 2001 WG1/40/01 Requirements for Aerospace Supplier Quality System Certification / Registration schemes for use by the IAQG
More informationDear Customer, Best Regards, Quality Assurance Team. Customer Channels. Thermo Fisher Scientific. 300 Industry Drive. Pittsburgh, PA 15275
Fisher Scientific Company L.L.C. 300 Industry Drive Pittsburgh, PA 15275 Quality Assurance Tel: 724-517-2400 Fax: 724-517-1546 www.fishersci.com Dear Customer, Thank you for your inquiry. Attached is Fisher
More informationPolicy for Certification of Private Label Products Within the Cradle to Cradle Certified Certification Scheme. Version 1.0.
Policy for Certification of Private Label Products Within the Cradle to Cradle Certified Certification Scheme Version 1.0 March 2015 Copyright, Cradle to Cradle Products Innovation Institute, 2015 Cradle
More informationIATF - International Automotive Task Force Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations
Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations The Rules for achieving and maintaining IATF Recognition 5 th Edition for IATF 16949 ( Rules 5 th
More informationSANAS TECHNICAL REQUIREMENT FOR THE APPLICATION OF ISO/IEC IN THE FIELD OF FUSION WELDING METALLIC MATERIALS
SANAS TECHNICAL REQUIREMENT FOR THE APPLICATION OF IN THE FIELD OF FUSION WELDING METALLIC MATERIALS Approved By: Chief Executive Office: Ron Josias Executive - Accreditation: Mpho Phaloane Author: Working
More informationFIRE SAFETY GUIDELINES
FSG 1:2013 FIRE SAFETY AND SHELTER DEPARTMENT SINGAPORE CIVIL DEFENCE FORCE FIRE SAFETY GUIDELINES FSG 1:2013 CERTIFICATION OF REGULATED FIRE SAFETY PRODUCTS & MATERIALS (REVISED PROCEDURES) Effective
More informationNACC. North American Contractor Certification Program for AG&M Contractors. Presentation by: John Kent President - AMS, Inc.
NACC North American Contractor Certification Program for AG&M Contractors Presentation by: John Kent President - AMS, Inc. FIF 2014 AMS, Inc. Association Sponsored Certification An Industry Leader More
More informationISO/IEC 17011:2017 TRANSITION PLAN
2018 A022-01 March 2018 ISO/IEC 17011:2017 TRANSITION PLAN AFRICAN ACCREDITATION COOPERATION Publication reference: A022-01 Page 1 of 6 Authorship This document has been prepared by the AFRAC Document
More informationUSDA ISO Guide 65 Program Accreditation for Certification Bodies
Page 1 of 6 USDA ISO Guide 65 Program Accreditation for Certification Bodies 1 Purpose This document provides the requirements to be met in designing a USDA ISO Guide 65 Program. It also provides the requirements
More informationREVISION 5. International Automotive Task Force TRANSITION STRATEGY ISO/TS IATF Dated 1 March
REVISION 5 Dated 1 March 2018 International Automotive Task Force TRANSITION STRATEGY ISO/TS 16949 IATF 16949 2 CONTENTS Foreword Revision 1 dated 3 October 2016 Revision 2 dated 21 November 2016 Revision
More informationPharmaplast S.A.E. Amiria FACTORY, Amria Free Zone, Alexandria, Egypt. has been assessed and certified as meeting the requirements of
Certificate G803/58704 ffi@m The management system of Amiria FACTORY, Amria Free Zone, Alexandria, Egypt has been assessed and certified as meeting the requirements of Directive 93/42IEEC Annex ll (excluding
More informationProcess for the Evaluation and Acceptance of Building Products in the USA
Process for the Evaluation and Acceptance of Building Products in the USA Rick Okawa, P.E. Deputy Vice President of Global Services and Business Development An Integrated Building System Product Certification
More informationSouth African Forestry Assurance Scheme SAFAS 6:2018. Certification and Accreditation Procedures. Issue SAFAS Council SAFAS
South African Forestry Assurance Scheme SAFAS 6:2018 Issue 1 2018-05-22 SAFAS 346 Burger Street Pietermaritzburg South Africa Tel: +27 33 897 5000 1 Document name: Document number: SAFAS 6:2018 Approved
More informationPrerequisite: Review of the ISO Standard prior to attendance is strongly suggested. Bring a copy to the training class.
2 DAY ISO 9001-2008 *INCLUDES SPECIFIC ASPECTS OF ISO 9001-2015* INTERNAL AUDITOR TRAINING 8:30AM - 4:30PM 2015 Course Offering Description: This program is designed to develop internal quality management
More informationTRANSMITTED VIA ELECTRONIC MAIL, FACSIMILE, AND COURIER
15 January 2015 TRANSMITTED VIA ELECTRONIC MAIL, FACSIMILE, AND COURIER Gal Moran (IANA #1017) 3 Shimon Finkel Street Tel Aviv Israel Email: admin@blackicedomains.com Fax: +972 3644 6425 RE: NOTICE OF
More informationCLOUD QUALITY AND CLOUD CERTIFICATION
CLOUD QUALITY AND CLOUD CERTIFICATION 8th EuroCloud Congress Cloud, Trust & Security 25th October 2017 / Brussels, Belgium Ivana Tepčević Project Manager and Lead Auditor, SGS Belgrade AGENDA SGS in brief
More informationAWS Presentation to ASME Section IX, SG Qualification Houston January 26, 2015 by John Gayler Senior Associate Executive Director
AWS Presentation to ASME Section IX, SG Qualification Houston January 26, 2015 by John Gayler Senior Associate Executive Director American Welding Society 1919 1971 New York City, NY 1971 Present Miami,
More informationISO Certification For Laboratory Accreditation. Dr Amadou TALL Consultation
ISO 17025 Certification For Laboratory Accreditation Dr Amadou TALL Consultation ISO 17025 Certification ISO/IEC 17025 Global quality standard for testing and calibration laboratories. It is the basis
More informationPolicy for Manufacturers to Maintain Compliance Within the Material Health Certificate Scheme. Version 1.1. January 2015
Policy for Manufacturers to Maintain Compliance Within the Material Health Certificate Scheme Version 1.1 January 2015 Copyright Cradle to Cradle Products Innovation Institute, 2015 1 Purpose This policy
More informationRules for LNE Certification of Management Systems
Rules for LNE Certification of Management Systems Application date: March 10 th, 2017 Rev. 040716 RULES FOR LNE CERTIFICATION OF MANAGEMENT SYSTEMS CONTENTS 1. PURPOSE... 3 2. SCOPE... 3 3. DEFINITION
More informationEXHIBIT A: PROJECT SCOPE AND SCHEDULE The Project consists of the activities and delivery dates identified in this Exhibit A, implemented in accordance with the Agreement. The Parties have included a schedule
More informationMinimum Requirements For The Operation of Management System Certification Bodies
ETHIOPIAN NATIONAL ACCREDITATION OFFICE Minimum Requirements For The Operation of Management System Certification Bodies April 2011 Page 1 of 11 No. Content Page 1. Introduction 2 2. Scope 2 3. Definitions
More informationAccredited Standards Committee X9, Incorporated Financial Industry Standards
DRAFT STANDARD FOR TRIAL USE DSTU X9.100-172-3-2007 Specifications for the Validation of Interoperable Check Security Features (ICSF) Part 3 Message Definitions Publication of this draft standard for trial
More informationFUNCTIONAL SAFETY CERTIFICATE
FUNCTIONAL SAFETY CERTIFICATE This is to certify that the GSS (GSA******-*) Series Global Safety Limit Switch Manufactured by Honeywell International Inc. 315 East Stephenson Street, Freeport, Illinois,
More informationCertificate. Certificate number: Certified by EY CertifyPoint since: November 20, 2015
Certificate Certificate number: 2015-020 Certified by EY CertifyPoint since: November 20, 2015 Based on certification examination in conformity with defined requirements in ISO/IEC 17021-1:2015 and ISO/IEC
More informationCertificate Certificate number:
Certificate Certificate number: 2017-009 Based on certification examination in conformity with defined requirements in ISO/IEC 17021:2015 and ISO/IEC 27006:2015, the Information Security Management System
More informationIntroduction. Content. Training Course NAA Inspectors Training Course - Initial Airworthiness. Location(s) / Date(s) List price September 2019
Training Course NAA Inspectors Training Course - Initial Airworthiness Location(s) / Date(s) Hoofddorp, 11-13 February 2019 Netherlands 17-19 September 2019 List price 1290.00 Introduction EU Regulation
More informationAQMS AUDITOR AUTHENTICATION BODY AQMS AUDITOR APPLICATION GUIDE
AQMS OR AUTHENTICATION BODY AQMS OR APPLICATION GUIDE AQMS OR APPLICATION GUIDE PROBITAS AUTHENTICATION 6 1 2014 TABLE OF CONTENTS 1 Introduction... 2 2 Certification Schemes... 3 3 Certification Grades...
More informationWECC Criterion INT-001-WECC-CRT-3
WECC Criterion INT-001-WECC-CRT-3 A. Introduction 1. Title: e-tag Requirements for WECC including Wrongful Denial of Request for Interchange (RFI) 2. Number: INT-001-WECC-CRT-3 3. Purpose: To manage Arranged
More informationCERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Manufacture of Powder Metal Injection Moulded
More informationGreen Chemistry and Commerce Council Roundtable
NSF/ANSI Standards Green Chemistry and Commerce Council Roundtable Portland, Oregon July 10, 2008 Clif McLellan Director of Toxicology Services Overview of Presentation Introduction to NSF International
More informationAccreditation process (LA-I-02)
Accreditation process (LA-I-02) Bureau of Laboratory Accreditation Department of Science Service Ministry of Science and Technology 75/7 Rama VI Road, Ratchathewi District, Bangkok 10400 Tel: 0-2201-7325,
More informationThe Value of ANSI Accreditation. Top 10 Advantages. of accredited third-party conformity assessment
The Value of ANSI Accreditation Top 10 Advantages of accredited third-party conformity assessment The American National Standards Institute (ANSI) offers highly recognized accreditation programs globally
More informationCertification Process Overview
Certification Process Overview 1. General: TUV India Pvt. Ltd (TUV) is a part of TUV NORD Group and provides system certification services. This overview is to give the idea of steps involved in certification,
More informationCERTIFICATE SCHEME THE MATERIAL HEALTH CERTIFICATE PROGRAM. Version 1.1. April 2015
CERTIFICATE SCHEME For THE MATERIAL HEALTH CERTIFICATE PROGRAM Version 1.1 April 2015 Copyright Cradle to Cradle Products Innovation Institute, 2015 1 Purpose The intention of the Certificate Scheme is
More informationCertification Process Household and Similar Equipment
Certification Process Household and Similar Equipment Ordinance No. 371, of December 29, 2009 Objective: Evaluation of household and similar appliances, with a focus on security requirements in order to
More informationGlobal TRUST Certification Ltd
3rd Floor, Block 3, Quayside Business Park, Mill Street, Dundalk, Co Louth Certification Body Registration number: 6002 is accredited by the Irish National Board (INAB) to undertake product certification
More informationCERTIFICATE OF REGISTRATION
This is to certify that CERTIFICATE Hardware Specialty Co., Inc. Quality Headquarters 430 Northboro Road Central, Marlborough, Massachusetts 01752 USA The above organization has been audited in accordance
More informationStandard COM-002-2a Communications and Coordination
A. Introduction 1. Title: Communication and Coordination 2. Number: COM-002-2a 3. Purpose: To ensure Balancing Authorities, Transmission Operators, and Generator Operators have adequate communications
More informationQuality Management System (QMS)
Chapter 12: Introduction: TOTAL QUALITY MANAGEMENT - II Quality Management System (QMS) Dr. Shyamal Gomes American National Standard Institute (ANSI) and American Society for Quality Control (ASQC) define
More informationPRODUCTION QUALITY ASSURANCE CERTIFICATE. Initial date: 26 May, 2015
DNV GL PRODUCTION QUALITY ASSURANCE CERTIFICATE Certificate No.: 12403-2018-CE-USA-ACCREDIA This certificate consists of 2 pages Initial date: 26 May, 2015 Valid: 14 May, 2018-13 May, 2021 This is to certify
More informationIEC Quality Assessment System for Electronic Components (IECQ System)
IECQ 03-7 Edition 2.0 2017-10 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Rules of Prodecure Part 7: IECQ Counterfeit Avoidance Programme (IECQ AP-CAP) Programme
More informationFIRST ARTICLE INSPECTION
FIRST ARTICLE INSPECTION Origination Date: XXXX Document Identifier: Date: Project: Document Status: Document Link: Latest Revision Date Customer, Unique ID, Part Number Draft, Redline, Released, Obsolete
More informationAWS QC17:2002. Standard for Accreditation of Welding Fabricators for AWS Certified Welding Fabricator Program
AWS QC17:2002 Standard for Accreditation of Welding Fabricators for AWS Certified Welding Fabricator Program AWSQC17:2002 Standard for Accreditation of Welding Fabricators for AWS Certified Welding Fabricator
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board/ACLASS 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that 80 Industrial Drive Alpha, NJ 08865
More informationIATF - International Automotive Task Force Rules for Achieving and Maintaining IATF Recognition IATF Rules 5 th Edition Frequently Asked Questions
Rules for Achieving and Maintaining IATF Recognition IATF Rules 5 th Edition Frequently Asked Questions The Rules for achieving and maintaining IATF Recognition 5 th Edition for IATF 16949 ( Rules 5 th
More informationGUIDE ON APPLICATION FOR ROUNDTABLE FOR SUSTAINABLE PALM OIL PRINCIPLES AND CRITERIA (RSPO P & C) INCLUDING GROUP CERTIFICATION
GUIDE ON APPLICATION FOR ROUNDTABLE FOR SUSTAINABLE PALM OIL PRINCIPLES AND CRITERIA (RSPO P & C) INCLUDING GROUP CERTIFICATION Page 1 of 7 1. INTRODUCTION This guideline has been prepared to provide guidance
More informationDiscontinuing the Metallic Handcuffs Compliance Testing Program and Request for
This document is scheduled to be published in the Federal Register on 09/14/2016 and available online at https://federalregister.gov/d/2016-22057, and on FDsys.gov Billing Code: 4410-18 DEPARTMENT OF JUSTICE
More informationPRODUCT CERTIFICATION SCHEME FOR ENERGY DRINKS
Ref No: RACS/PCS/11 Page 1 of 6 1. Objective: This procedure describes the criteria implemented by RACS as Notified Body of Emirates Authority of Standardization and Metrology (ESMA) that Energy Drinks
More informationNTS William C. McGinnis
NTS William C. McGinnis President-CEO, NTS Mr. McGinnis is President and CEO of NTS and is also a member of the Board of Directors. He has been with National Technical Systems for over 28 years and has
More informationInter American Accreditation Cooperation. IAAC Transition from ISO/IEC 17011:2004 to ISO/IEC 17011:2017
IAAC Transition from ISO/IEC 17011:2004 to ISO/IEC 17011:2017 CLASSIFICATION This document is classified as an IAAC Mandatory Document. AUTHORIZATION Issue Nº: 01 Prepared by: MLA Committee Date: March
More informationRaad voor Accreditatie (Dutch Accreditation Council RvA) Specific Accreditation Protocol for Certification according to ISO/IEC 20000
Raad voor Accreditatie (Dutch Accreditation Council RvA) Specific Accreditation Protocol for Certification according to ISO/IEC 20000 Document code: RvA-SAP-C002-UK Version 3, 3-10-2017 A Specif ic Accreditation
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that 2105 Seabrook Circle Seabrook, TX 77586 has
More informationCode of Practice for the TL 9000 Certification Process. Release 8.0
Code of Practice for the TL 9000 Certification Process Release 8.0 This document is a product of the Oversight Work Group of the TIA Business Performance Community ( BPC ). It is subject to change by the
More informationFAMI-QS VERSION 6 TRANSITION REQUIREMENTS
Quality and Safety System for Specialty Feed Ingredients FAMI-QS VERSION 6 TRANSITION REQUIREMENTS P-MS-002/ Rev 01 2017-12-20 TABLE OF CONTENTS 1. Introduction... 3 2. FAMI-QS Code Version 6... 3 2.1.
More information