CERTIFICATE OF ACCREDITATION
|
|
- Christopher McKenzie
- 6 years ago
- Views:
Transcription
1 CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board/ACLASS 500 Montgomery Street, Suite 625, Alexandria, VA 22314, This is to certify that 80 Industrial Drive Alpha, NJ has been assessed by ACLASS and meets the requirements of international standard ISO/IEC 17025:2005 while demonstrating technical competence in the field(s) of TESTING Refer to the accompanying Scope(s) of Accreditation for information regarding the types of tests to which this accreditation applies. AT-1798 Certificate Number ACLASS Approval Certificate Valid: 07/11/ /11/2015 Version No. 001 Issued: 07/23/2013 This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated January 2009).
2 SCOPE OF ACCREDITATION TO ISO/IEC 17025: Industrial Drive, Alpha, NJ Michael Hayes Phone: Milissa Bolcar Phone: TESTING Valid to: July 11, 2015 Certificate Number: AT I. Chemical ITEMS, MATERIALS OR PRODUCTS TESTED SPECIFIC TESTS OR PROPERTIES MEASURED (Single and multicomponent) Volatile Organic Compounds SPECIFICATION, STANDARD METHOD OR TECHNIQUE USED *KEY EQUIPMENT OR TECHNOLOGY Chemical Categories : Compressed Gas Mixture Paraffinic Isoparaffinic Aromatic Naphthenic Olefinic Organic Halide Alcohols Aldehydes Ethers Deuterated Sulfides Esters Ketones Acetylenes Nitriles Dienes Diatomic CFC & HCFCs SPE ALP and SPE ALP ANA ALP and ANA ALP Notes: 1. * = As Applicable 2. This scope is part of and must be included with the Certificate of Accreditation No. AT Agilent 6890 GC/FID Vice President Version 001 Issued: 07/23/2013 Page 1 of 1
3 CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board/ACLASS 500 Montgomery Street, Suite 625, Alexandria, VA 22314, This is to certify that 80 Industrial Drive Alpha, NJ has been assessed by ACLASS and meets the requirements of international standard ISO Guide 34:2009 while demonstrating technical competence in the field(s) of Reference Material Producer Refer to the accompanying Scope(s) of Accreditation for information regarding the types of materials to which this accreditation applies. AR-1799 Certificate Number ACLASS Approval Certificate Valid 07/11/ /11/2015 Version No. 001 Issued: 07/23/2013
4 SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009 (RMP) 80 Industrial Drive, Alpha, NJ Michael Hayes Phone: Milissa Bolcar Phone: REFERENCE MATERIAL PRODUCER Valid to: July11, 2015 Certificate Number: AR Category and Sub-Category of Reference Material ILAC RM Category Class or Type of Reference Materials Produced (include range where applicable) Methods or Techniques Utilized in the RMP Laboratory if appropriate CRM CHEMICAL Single and multi-component VOCs Chemical Categories : A 7.1 (Gas Mixtures) A 7.2 (Trace Volatile Organic Compounds) Paraffinic Isoparaffinic Aromatic Naphthenic Olefinic Organic Halide Alcohols Aldehydes Ethers Deuterated Sulfides Esters Ketones Acetylenes Nitriles Dienes Diatomic CFC & HCFCs Agilent 6890 GC/FID Version 001 Issued: 07/23/2013 Page 1 of 2
5 Notes: 1. Please contact the RMP organization for more information on CRM uncertainty values, Ucrm values, and other specific lot values. Some of this information may also be available on the RMPs website. 2. This scope is part of and must be included with the Certificate of Accreditation No. AR Vice President Version 001 Issued: 07/23/2013 Page 2 of 2
CERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that 2105 Seabrook Circle Seabrook, TX 77586 has
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Palindrome Technologies 100 Village Ct. Hazlet,
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Coherent LSM 27650 SW 95th Ave. Wilsonville,
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Quality Engineering Service of the Chippewa
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Productivity Quality, Inc./Advanced Inspection
More informationAccreditation and Registration 07/25/18
Accreditation and Registration 07/25/18 THE DIETARY SUPPLEMENT SPECIALISTS ADVANCED LABORATORIES ACCREDITATION AND REGISTRATION DOCUMENTS PAGE CONTENT 3 UT CERTIFICATE OF FDA REGISTRATION 4-6 UT SCOPE
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Productivity Quality, Inc./Advanced Inspection
More informationMay 23, 2016 VIA . Air Technology Laboratories, Inc. Val Mallari E. Gale Avenue, Ste 130 City of Industry CA 91748
May 23, 2016 VIA EMAIL Val Mallari 18501 E. Gale Avenue, Ste 130 City of Industry CA 91748 Re: Extension for DoD ELAP & ISO/IEC 17025: 2005 accreditation Dear Val: This letter is to inform you that your
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z ATC INC Guion Lane Indianapolis, IN Hemi Sagi Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 4037 Guion Lane Indianapolis, IN 46268 Hemi Sagi Phone: 317 328 8492 CALIBRATION Valid To: March 31, 2019 Certificate Number: 2197.01
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc., has assessed the Laboratory of: (Hereinafter called the Organization) and hereby
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PJF Rockford Park Drive Rockford, MI Bernard Warchuck Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PJF 6 301 Rockford Park Drive Rockford, MI 49341 Bernard Warchuck Phone: 616 866 8296 MECHANICAL Valid To: SEE FOOTNOTE 6 Certificate Number: 1856.01 In recognition
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. PJF Rockford Park Drive Rockford, MI Bernard Warchuck Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 PJF 6 301 Rockford Park Drive Rockford, MI 49341 Bernard Warchuck Phone: 616 866 8296 MECHANICAL Valid To: SEE FOOTNOTE 6 Certificate Number: 1856.01 In recognition
More informationANALYTICAL SERVICES DIVISION, VHG LABS Manchester, NH for technical competence in the field of
A2LA has accredited ANALYTICAL SERVICES DIVISION, VHG LABS Manchester, NH for technical competence in the field of Chemical Testing This laboratory is accredited in accordance with the recognized International
More informationAmerican Association for Laboratory Accreditation
Page 1 of 5 This document describes the accreditation requirements for organizations performing activities associated with Stationary Source Evaluation Testing per the requirements of ASTM D7036 (2004).
More informationGUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES
GUIDANCE AND INTERPRETATION DOCUMENTS TO THE REQUIREMENTS FOR THE COMPETENCE OF CONFORMITY ASSESSMENT BODIES Table of Contents 1 PURPOSE... 2 2 GENERAL... 2 3 GUIDANCE AND INTERPRETATIVE DOCUMENTS... 2
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. LAIRD TECHNOLOGIES, INC. W66 N220 Commerce Court Cedarburg, WI Adam Alger Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 LAIRD TECHNOLOGIES, INC. W66 N220 Commerce Court Cedarburg, WI 53012 Adam Alger Phone: 262 375 4400 ELECTRICAL (EMC) Valid to: January 31, 2019 Certificate
More informationDuctility SAE J81 (Sec. 4.8) ASME/ANSI B M; Customer Specified Requirements
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SPECIALTY SCREW CORPORATION 2801 Huffman Boulevard Rockford, IL 61103 Beth Halfman Phone: 815 969 4127 MECHANICAL Valid To: November 30, 2017 Certificate Number:
More informationAccreditation Criteria For Conformity Assessment Bodies
Page 1 of 8 Reviewed by: Getnet Tsigemalak Approved by: Araya Fesseha Position: Quality Manager Position: Director General Signature: Signature: Contents Page 1 Purpose and Scope... 2 2 References... 2
More informationIso Iec Certificate Horiba
We have made it easy for you to find a PDF Ebooks without any digging. And by having access to our ebooks online or by storing it on your computer, you have convenient answers with iso iec 17025 certificate
More informationDomestic TPC Perspective on EPA Formaldehyde Regulation Jackson Morrill and Gary Heroux Composite Panel Association
Domestic TPC Perspective on EPA Formaldehyde Regulation Jackson Morrill and Gary Heroux Composite Panel Association Joint Industry Workshop on EPA Formaldehyde Rule Colfax, NC January 18, 2017 1 TPCs Under
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 A TEST LAB TECHNO CORP. 101-104, 1F, A Building, Taoyuan Street Safflower Ridge Industrial Area, Nanshan District Shenzhen, 518055, People s Republic of China
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MICROSOFT EMC LABORATORY 1 17760 NE 67 th Court Redmond, WA 98052 Sajay Jose Email: sajose@microsoft.com Phone: 425 421 9799 ELECTRICAL (EMC) Valid to: August
More informationWho is doing your calibration work?
The United Kingdom Accreditation Service Who is doing your calibration work? Are you confident that your goods and services and their component parts are based on measurements taken with correctly calibrated
More informationMinimum Scheme Requirements to Certify Criminal Justice Restraints Described
This document is scheduled to be published in the Federal Register on 07/13/2017 and available online at https://federalregister.gov/d/2017-14638, and on FDsys.gov Billing Code: 4410-18 DEPARTMENT OF JUSTICE
More informationPart 5: Requirements for ABs FOOD SAFETY SYSTEM CERTIFICATION Part V: Requirements for Accreditation Bodies
Part 5: Requirements for ABs FOOD SAFETY SYSTEM CERTIFICATION 22000 Part V: Requirements for Accreditation Bodies Version 4.1: July 2017 Part V: Requirements for Accreditation Bodies Contents 1 Purpose...
More informationINAB Mandatory and Guidance Documents Policy and Index
INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such
More informationLumen Maintenance of LED Light Source Test Report
Lumen Maintenance of LED Light Source Test Report This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005. This accreditation demonstrates technical competence
More informationINAB Mandatory and Guidance Documents Policy and Index
INAB Mandatory and Guidance s Policy and Index This publication is aimed at assisting in determining what documents are relevant to various organisations and at providing contact points for accessing such
More informationS. Scholz / K. Meyer / J.E. Nielsen / Harald Drück/J.Fernández/E.Prado/L.Nelson Page 1 of 7
Global Solar Certification Network Working Rules Annex A. Requirements for Certification Bodies and their subcontracted laboratories, inspection bodies and inspectors Date: 2017/03/07 Document number:
More informationWorkshop Item 1 - ISO 9001: 2008 migration
Workshop Item 1 - ISO 9001: 2008 migration Joint IAF-ISO Communiqué on migration to ISO 9001: 2008 ISO 9001: 2008 does not contain any new requirements Accredited Certification to ISO 9001:2008 shall not
More informationStrengthening International Systems of Conformity Assessment
2011/SOM1/SCSC/CON1/014 Session 8 Strengthening International Systems of Conformity Assessment Submitted by: International Laboratory Accreditation Cooperation (ILAC) 6 th Conference on Good Regulatory
More informationAccreditation Bodies in other
Accreditation Bodies in other WHO Regions Jeanette Twell 6July2011 Overview ILAC Accreditation International Standards vs Guidance Auditing (NATA) EQAS/Proficiency Testing Take home message 2 International
More informationLaboratory Accreditation Building Confidence on Testing Quality
Laboratory Accreditation Building Confidence on Testing Quality Dr. George Anastasopoulos, Director (Conformity Assessment) & Prasanth S Ramakrishnan, MS, LEED-AP (Principal Staff & Program Manager) ASME
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationInter American Accreditation Cooperation. IAAC, IAF and ILAC Resolutions Applicable to IAAC MLA Peer Evaluations
IAAC, IAF and ILAC Resolutions Applicable to IAAC MLA Peer Evaluations CLASSIFICATION This document is classified as an IAAC Mandatory Document. AUTHORIZATION Issue Nº: 07 Prepared by: MLA Committee and
More informationPRESENTATION OVERVIEW
ITU Regional Seminar for the Africa Region on Conformance and Interoperability Testing Centre(s) Accra (Ghana), 4-6 July 2011 Accreditation Bodies Presented by Andrew Kwan ITU Consultant 1 PRESENTATION
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TA TECHNOLOGY (SHANGHAI) CO., LTD. Building 3, No. 145 Jintang Rd. Tangzhen Industry Park Pudong, Shanghai, People s Republic of China Mr. Zhihui (Henry) Liu
More informationThe Value of ANSI Accreditation. Top 10 Advantages. of accredited third-party conformity assessment
The Value of ANSI Accreditation Top 10 Advantages of accredited third-party conformity assessment The American National Standards Institute (ANSI) offers highly recognized accreditation programs globally
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 JIANGSU YANGTZE TESTING, CERTIFCATION AND INSPECTION CORPORATION No.6-3, XingZhi Road, XingZhi Technology Park XinGang Economic Development Zone NanJing City,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 BAY AREA COMPLIANCE LABORATORIES CORP. No. 69 Pulongcun Puxinhu Industrial Zone, Tangxia Town Dongguan, Guangdong 523719 People s Republic of China Mr. David
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CFV SOLAR TEST LABORATORY, INC Ste. A University Blvd. SE Albuquerque, NM 87106
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CFV SOLAR TEST LABORATORY, INC. 5600 Ste. A University Blvd. SE Albuquerque, NM 87106 Jim Crimmins (Authorized Representative) Phone: 505 998 0102 Email: Jim.Crimmins@cfvsolar.com
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA INC. 3933 U.S. Route 11 Cortland, NY 13045 Terence O Beirne Phone: 607 758 6316 www.intertek.com ELECTRICAL Valid To: March 31,
More informationThe International Laboratory Accreditation Cooperation (ILAC) & The International Accreditation Forum (IAF)
The International Laboratory Accreditation Cooperation (ILAC) & The International Accreditation Forum (IAF) Perspectives on ILAC & IAF Multilateral Mutual Recognition Arrangements Peter Unger, ILAC Chair
More informationPrimary Reference Materials
Primary Reference Materials 2016 Gas standards VSL provides the following types of gas standards Primary reference materials Certified reference materials Calibrated gas mixtures All gas standards are
More informationSPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS
BELAC 2-405-FSMS Rev 1-2017 SPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF FOOD SAFETY MANAGEMENT SYSTEMS The only valid versions of the documents of the BELAC management
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SIEMIC (NANJING-CHINA) LABORATORIES 新美科 ( 南京 ) 信息技术有限公司 No. 2-1 Longcang Avenue Yuhua Economic Development Zone Yuhua District, Nanjing, 210039, People s Republic
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SGS NORTH AMERICA, INC. 15150 Avenue of Science, Suite 300 1 San Diego, CA 92128 Nathan Gieselman Phone: 858 592 7100 ELECTRICAL Valid To: July 31, 2018 Certificate
More informationLaboratory Accreditation Board
The purpose of this RFQ is to solicit proposals to have the five regional forensic crime laboratories within the New Jersey State Police Office of Forensic Sciences assessed to the ISO/IEC 17025 international
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 COOK RESEARCH INCORPORATED (CRI) 1 Geddes Way West Lafayette, IN 47906 Margaret McClure Phone: 765 463 7537 MECHANICAL Valid To: June 30, 2016 Certificate Number:
More informationAccreditation of Forensic Science Service Providers
Accreditation of Forensic Science Service Providers Laurel J Farrell Senior Accreditation Manager ANSI-ASQ National Accreditation Board Quality Matters Topics Accreditation what it is and what it is not
More informationIATF - International Automotive Task Force Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations
Rules for achieving and maintaining IATF Recognition IATF Rules 5 th Edition Sanctioned Interpretations The Rules for achieving and maintaining IATF Recognition 5 th Edition for IATF 16949 ( Rules 5 th
More informationDiscontinuing the Metallic Handcuffs Compliance Testing Program and Request for
This document is scheduled to be published in the Federal Register on 09/14/2016 and available online at https://federalregister.gov/d/2016-22057, and on FDsys.gov Billing Code: 4410-18 DEPARTMENT OF JUSTICE
More informationBenefits of Accreditation and Conformity Assessment for Business
2008/SOM3/SCSC/CONF/032 Benefits of Accreditation and Conformity Assessment for Business Submitted by: APLAC 7 th Conference on Standards and Conformance Cusco, Peru 10-11 August 2008 Benefits of Accreditation
More informationISO CALIBRATION WORLD STANDARD SERVICE FOR YOUR WORLD STANDARD TEST TOOLS.
ISO 17025 CALIBRATION WORLD STANDARD SERVICE FOR YOUR WORLD STANDARD TEST TOOLS. MAXIMIZE TRACEABILITY AND ACCURACY FOR YOUR TEST EQUIPMENT. The accuracy of all measuring devices degrade over time. This
More informationList of EA Publications. And International. Documents
EA/INF-01 List of EA Publications and International Documents Publication Reference EA-INF/01: 2018 List of EA Publications And International Documents PURPOSE This gives the list of EA documents to be
More informationAPLAC Application to Enter the APLAC MRA or to Extend Scope - APLAC MR 003
ASIA PACIFIC LABORATORY ACCREDITATION COOPERATION MUTUAL RECOGNITION ARRANGEMENT (MRA) COUNCIL Application to Become a Signatory to the APLAC Mutual Recognition Arrangement (APLAC MRA) or to Extend Scope
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 A TEST LAB TECHNO CORP. No.140-1, Changan Street Bade District Taoyuan City, Taiwan (R.O.C.) Kevin Tsai email: kevin@atl-lab.com.tw Phone: 886-3-2710188 Ext.
More informationCNAS-RC02. Rules for Sanctions against the Accreditation of Certification Bodies
CNAS-RC02 Rules for Sanctions against the Accreditation of Certification Bodies CNAS CNAS-RC02:2014 Page 1 of 7 Foreword This document is developed by CNAS. This document specifies rules for sanctions
More informationSouth African Forestry Assurance Scheme SAFAS 6:2018. Certification and Accreditation Procedures. Issue SAFAS Council SAFAS
South African Forestry Assurance Scheme SAFAS 6:2018 Issue 1 2018-05-22 SAFAS 346 Burger Street Pietermaritzburg South Africa Tel: +27 33 897 5000 1 Document name: Document number: SAFAS 6:2018 Approved
More informationCOOMET Recommendation Content and Rules of Drawing up Documents for CRMs Developed within COOMET
COOMET Recommendation Content and Rules of Drawing up Documents for CRMs Developed within COOMET CООМЕТ R/RM/5:2010 Endorsed at the 5 th meeting of experts on certified reference materials of COOMET member-countries
More informationSPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF INFOR- MATION SECURITY MANAGEMENT SYSTEMS (ISO/IEC 27001)
BELAC 2-405-ISMS R0 2017 SPECIFIC PROVISIONS FOR THE ACCREDITATION OF CERTIFICATION BODIES IN THE FIELD OF INFOR- MATION SECURITY MANAGEMENT SYSTEMS (ISO/IEC 27001) The only valid versions of the documents
More informationDAkkS Who we are. Attesting competence, Assuring quality, Creating confidence.
DAkkS Who we are Attesting competence, Assuring quality, Creating confidence. What is accreditation? Reliability through conformity assessment The demands on the quality of goods and services are growing
More informationISO 9001 Auditing Practices Group Guidance on:
International Organization for Standardization International Accreditation Forum Date: 13 January 2016 ISO 9001 Auditing Practices Group Guidance on: Expected Outcomes The expected outcomes documents (given
More informationIAF Mandatory Document KNOWLEDGE REQUIREMENTS FOR ACCREDITATION BODY PERSONNEL FOR INFORMATION SECURITY MANAGEMENT SYSTEMS (ISO/IEC 27001)
IAF Mandatory Document KNOWLEDGE REQUIREMENTS FOR ACCREDITATION BODY PERSONNEL FOR INFORMATION SECURITY MANAGEMENT SYSTEMS (ISO/IEC 27001) (IAF MD 13:2015) Issue 1 IAF MD - Knowledge Requirements for Accreditation
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHENZHEN MORLAB COMMUNICATIONS TECHNOLOGY CO. LTD. Fl. 3, Building A, Fei Yang Science Park No. 8 Long Chang Road, Block 67 BaoAn District, Guangdong Province,
More informationKENYA ACCREDITATION SERVICE
KENAS-POL-004 02 06/08/2018 06/09/2018 POL 1 of 5 Approval and Authorisation Completion of the following signature blocks signifies the review and approval of this Document. Authored by ASSISTANT DIRECTOR
More informationISO Certification For Laboratory Accreditation. Dr Amadou TALL Consultation
ISO 17025 Certification For Laboratory Accreditation Dr Amadou TALL Consultation ISO 17025 Certification ISO/IEC 17025 Global quality standard for testing and calibration laboratories. It is the basis
More informationJOB DESCRIPTION: TECHNICAL ASSESSOR
Page of 6 Prepared by: Mulugeta Mekonnen Approved by: Araya Fesseha Signature: Signature: CONTENTS Purpose and scope... 2 2 References... 2 3 Selection Criteria... 2 4 Training... 3 5 Responsibilities...
More informationList of EA Publications. And International. Documents
EA/INF-01 List of EA Publications and International Documents Publication Reference EA-INF/01: 2018 List of EA Publications And International Documents PURPOSE This publication gives the list of EA documents
More informationList of EA Publications. Documents
EA/INF-01 List of EA Publications and International Documents Publication Reference EA-INF/01: 2014 List of EA Publications And International Documents PURPOSE This publication gives the list of EA documents
More informationIECEE. IEC-ILAC-IAF Tripartite MoU CB-FCS Scheme and Market Control INTERNATIONAL ELECTROTECHNICAL COMMISSION
INTERNATIONAL ELECTROTECHNICAL COMMISSION WORLDWIDE SYSTEM FOR CONFORMITY TESTING AND CERTIFICATION OF ELECTRICAL EQUIPMENT AND COMPONENTS IECEE IEC-ILAC-IAF Tripartite MoU CB-FCS Scheme and Market Control
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ECI TELECOM S LQLAB 30 Hasivim Street Petah-Tikva 4959338, ISRAEL Moshe Perel Phone: 972 52-4008642 Email: Moshe.Perel@ecitele.com ELECTRICAL Valid to: June
More informationAccreditation process (LA-I-02)
Accreditation process (LA-I-02) Bureau of Laboratory Accreditation Department of Science Service Ministry of Science and Technology 75/7 Rama VI Road, Ratchathewi District, Bangkok 10400 Tel: 0-2201-7325,
More informationACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Various Accreditation Schemes ACCAB-ASM-7.0 CONTROLLED COPY Revision Number Revision
More informationProtocol on the Mutual Acceptance of the Results of Conformity Assessment
Protocol on the Mutual Acceptance of the Results of Conformity Assessment 1 Presentation Overview Overview of the Conformity Assessment (CA) Protocol Implementation and Next Steps Cooperation Agreement
More informationIAF Informative Document. Information on the Transition of Management System Accreditation to ISO/IEC :2015 from ISO/IEC 17021:2011
IAF Informative Document Information on the Transition of Management System Accreditation to ISO/IEC 17021-1:2015 from ISO/IEC 17021:2011 Issue 1 (IAF ID 11:2015) Issue 1 Information on the Transition
More informationACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES ACCREDITATION SCHEME MANUAL Document Title: Document Number: Various Accreditation Schemes ACCAB-ASM-7.0 CONTROLLED COPY Revision Number Revision
More informationInter American Accreditation Cooperation. IAAC Transition from ISO/IEC 17011:2004 to ISO/IEC 17011:2017
IAAC Transition from ISO/IEC 17011:2004 to ISO/IEC 17011:2017 CLASSIFICATION This document is classified as an IAAC Mandatory Document. AUTHORIZATION Issue Nº: 01 Prepared by: MLA Committee Date: March
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 DEKRA TESTING AND CERTIFICATION, S.A.U. Parque Tecnologico de Andalucia C/ Severo Ochoa 2 29590-Campanillas, Málaga, SPAIN Jose Maria Fernandez Phone: +34 952619100
More informationILAC The International Laboratory Accreditation Cooperation IAF The International Accreditation Forum Latest developments
ILAC The International Laboratory Accreditation Cooperation IAF The International Accreditation Forum Latest developments 49 th CIML Meeting (04-06 November 2014) Auckland IAF and ILAC Objectives To maintain
More informationConsumer Product Safety Certification IOM Workshop on Certification April 13, 2010
Consumer Product Safety Certification IOM Workshop on Certification April 13, 2010 This presentation has not been reviewed or approved by the Commission and may not reflect its views 1 What Products Must
More informationProcess for the Evaluation and Acceptance of Building Products in the USA
Process for the Evaluation and Acceptance of Building Products in the USA Rick Okawa, P.E. Deputy Vice President of Global Services and Business Development An Integrated Building System Product Certification
More informationGlobal Wind Organisation CRITERIA FOR THE CERTIFICATION BODY
Global Wind Organisation CRITERIA FOR THE CERTIFICATION BODY December 2015 (Version 3) 1 Contents 1. Introduction... 5 2. Criteria for approval of a Certification Body... 5 3. Selection of audit team members
More information6th Working Draft of ISO/IEC Introduction from the Convenor
May 2009 6th Working Draft of ISO/IEC 17065 3 rd meeting of WG 29 on June 29-30 - July 1 Introduction from the Convenor April 30th, 2009 Mario O. Wittner The Drafting Group prepared the WD 6 of ISO/IEC
More informationFIRE SAFETY GUIDELINES
FSG 1:2013 FIRE SAFETY AND SHELTER DEPARTMENT SINGAPORE CIVIL DEFENCE FORCE FIRE SAFETY GUIDELINES FSG 1:2013 CERTIFICATION OF REGULATED FIRE SAFETY PRODUCTS & MATERIALS (REVISED PROCEDURES) Effective
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2017
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017 COOK RESEARCH INCORPORATED (CRI) 1 Geddes Way West Lafayette, IN 47906 Margaret McClure Phone: 765 463 7537 MECHANICAL Valid To: June 30, 2020 Certificate Number:
More informationPARTNERING WITH THE REGULATORS: The Role for 3rd Party Accreditation in Food Safety
PARTNERING WITH THE REGULATORS: The Role for 3rd Party Accreditation in Food Safety Roger Brauninger American Association for Laboratory Accreditation (A2LA), Frederick, Maryland Topics Role of Accreditation
More informationPECB Change Log Form
GENERAL INFORMATION Owner / Department* Approver / Department * Training Development Department Quality Assurance Department Date of Approval* 2018/03/21 Course name: Language: New Version: Previous Version:
More informationACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES. Advisory Document on Tenders For Systems, Processes & Product Certifications
ACCREDITATION COMMISSION FOR CONFORMITY ASSESSMENT BODIES CAB Accreditation Advisory Document Document Title: Document Number: Advisory Document on Tenders For Systems, Processes & Product Certifications
More informationWelcome to Korea Accreditation System
Welcome to Korea Accreditation System Korean Agency for Technology and Standards 1 2 3 4 5 Organization of Government President Prime Minister Education, Science & Technology Unification National Defense
More informationEUROPEAN ACCREDITATION LEGAL FRAMEWORK
EUROPEAN ACCREDITATION LEGAL FRAMEWORK ECIBC Plenary 2016 Ed Wieles 24 November 2016 CONTENTS European model on Accreditation Requirements for Accreditation bodies Harmonised standards for accreditation
More informationAccreditation programme for management systems certification bodies NAR IRT Edition 2
Accreditation programme for management systems certification bodies NAR-01-04-IRT Edition 2 Approved by: Csaba Bodroghelyi Deputy Director General Responsible for preparation: Consistency of content reviewed
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. CETECOM INC. 411 Dixon Landing Road Milpitas, CA Franz Engert Phone: ELECTRICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CETECOM INC. 411 Dixon Landing Road Milpitas, CA 95035 Franz Engert Phone: 408 586 6205 ELECTRICAL Valid to: May 31, 2018 Certificate Number: 2135.01 In recognition
More informationAccreditation of Product Certification Scheme for Construction Materials By Ir C K Cheung Hong Kong Accreditation Service
Accreditation of Product Certification Scheme for Construction Materials By Ir C K Cheung Hong Kong Accreditation Service 1. Overview of HKAS Originated as an accreditation scheme called HOKLAS in 1985
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 GLOBAL COMPLIANCE AND TESTING CENTER OF HUAWEI TECHNOLOGIES CO., LTD. (RELIABILITY LABORATORY OF HUAWEI TECHNOLOGIES CO., LTD.). 1 Administration Building,
More informationAn unofficial translation, in case of any discrepancies between the English version and the original Swedish version the latter will prevail.
An unofficial translation, in case of any discrepancies between the English version and the original Swedish version the latter will prevail. Consolidated version of The Swedish Board for Accreditation
More informationDRT POWER SYSTEMS, LLC - SPACECRAFT 300 EAST STREET NEW HAVEN, CT 06511
American Systems Registrar, LLC, a provider of third-party system registration and accredited by the ANSI-ASQ National Accreditation Board under the Aerospace Registration Management Program, in accordance
More informationAccreditation Criteria
Accreditation Criteria Product Certification BCB 120 Apr 2006 Contents 0.0 Foreword 2 1.0 Scope 2 2.0 Criteria 2 3.0 Guidance on the requirements of ISO Guide 65 2 4.0 Scope of Accreditation 2 5.0 Time
More informationEA-01/01 List of EA Publications
Publication Reference EA-01/01 List of EA Publications 21 September 2006 1 of 9 Authorship This document has been prepared by the EA Secretariat. Official language The text may be translated into other
More informationAustralian Standard. General requirements for the competence of testing and calibration laboratories AS ISO/IEC ISO/IEC 17025:1999
AS ISO/IEC 17025 1999 ISO/IEC 17025:1999 AS ISO/IEC 17025 Australian Standard General requirements for the competence of testing and calibration laboratories This is a free 7 page sample. Access the full
More information