Nortel BCM50 Rls.2.0 Installation and Initial Configuration Nortel

Transcription

1 Nortel BCM50 Rls.2.0 Installation and Initial Configuration Nortel

2 QUESTION: 1 Which Digital Telephone supports the Key Indicator Module (KIM)? A B C. 7316E D Answer: C QUESTION: 2 Your Nortel Business Communications Manager 50 (BCM50) system configuration requires fewer than the standard number of channels delivered from the PRI line. Which two configuration tasks must you perform? (Choose two.) A. Provision all PRI lines. B. Enable all B-channels. C. Disable the DTM module. D. De-provision unassigned lines. E. Disable all the B-channels that are not needed., E QUESTION: 3 Which three IP telephones are supported on the Nortel Business Communications Manager 50 (BCM50)? (Choose three.) A. IP Phone 2002 B. IP Phone 2005 C. IP Phone 2007 D. IP Phone 2008 E. IP Phone 1120e Answer: A, C, E QUESTION: 4 2

3 Which statement describes the differences between a target line and a PRI? A. A target line has 23 B channels and 1 D channel. A PRI is a virtual line within the system. B. A PRI has 23 B channels and 1 D channel. A target line is a virtual line within the system. C. A PRI has 23 D channels and 1 B channel. A target line is a virtual line within the system. D. A target line has 23 D channels and 1 B channel. A PRI is a virtual line within the system. QUESTION: 5 Which statement about Nortel Business Communications Manager 50 (BCM50) line programming is true? A. You can change a PRI line to manual answer. B. A target line can be a prime line for a telephone. C. You can copy line programming between lines on different types of modules. D. Line programming does not overwrite assigned intercom, Answer DN, Hands-free or hunt group buttons. QUESTION: 6 Which statement about Nortel Business Communications Manager 50 (BCM50) target lines is true? A. Target lines are numbered 241 to 492. B. Target lines can be selected for outgoing calls. C. For a BCM50 configured using the PBX template, target lines are automatically assigned to all telephone DNs. D. Multiple appearances of a target line can be assigned to a set so that more than one call can simultaneously use that target line. QUESTION: 7 In a network configured for a Public Switched Telephone Network (PSTN) fall back, there are 3

4 two connections between a Nortel Business Communications Manager 50 (BCM50) and a remote system. Which connection is required? A. PBX trunk and a PSTN line B. A VoIP trunk and a PSTN line C. A LAN connection and a PSTN line D. A WAN connection and a PSTN line QUESTION: 8 A customer is updating the software on the Nortel Business Communications Manager 50 (BCM50). How does the customer know which software updates to apply? A. The status of the update, when viewed from the Software Management folder, indicates "Ready". B. The status of the update, when viewed from the Find Software Updates window, indicates "Ready". C. The status of the update, when viewed from the Software Management folder, indicates "Available". D. The status of the update, when viewed from the Find Software Updates window, indicates "Available". QUESTION: 9 Before applying a software update to your Nortel Business Communications Manager 50 (BCM50), you must obtain the software update. From where do you obtain the software update? A. It is delivered as a tape from Nortel upon customer request. B. It is downloaded from the Nortel Technical Support Web page. C. It is downloaded by Nortel support staff to the customer FTP server upon request. D. It is downloaded from the FTP server location that is ed to the system administrator. 4

5 QUESTION: 10 The Nortel Business Communications Manager 50 (BCM50) main units come from the factory in six variants. Which are three of the factory-available variants? (Choose three.) A. Nortel BCM50 B. Nortel BCM50c C. Nortel BCM50e D. Nortel BCM50ba E. Nortel BCM50ce Answer: A, C, D QUESTION: 11 The Nortel Business Communications Manager 50 (BCM50) expansion unit is designed to support Media Bay Modules (MBMs). These modules are available in many configurations. What is the maximum number of MBMs that the system can support? A. one B. two C. four D. six QUESTION: 12 You require a Nortel Business Communications Manager 50 (BCM50) system with an Ethernet router. Which main unit must you choose? A. BCM50 B. BCM50a C. BCM50b D. BCM50e QUESTION: 13 5

6 The Nortel Business Communications Manager 50 (BCM50) main unit is comprised of several components. Some of these components are Field Replaceable Units (FRU). Which statement is false? A. The router card is a FRU. B. The cooling fan is a FRU. C. The programmed hard drive is a FRU. D. The RJ-21 telephony connector is a FRU. QUESTION: 14 The primary management application for the Nortel Business Communications Manager 50 (BCM50) is Element Manager. Therefore, managing a Nortel BCM50 requires the connection of Element Manager. The Nortel BCM50 must be specifically defined in Element Manager. What is the specific requirement for this definition? A. Element Manager attributes B. BCM Monitor must be defined C. Nortel BCM50 defined as network location D. Nortel BCM50 defined as Network Element QUESTION: 15 You are installing a Nortel Business Communications Manager 50 (BCM50) at a small business site with seven digital stations. The customer wants to connect two PCs to the Nortel BCM50 to share the Internet connection. The Internet access is through DSL. Which two hardware configurations can support this installation? (Choose two.) A. BCM50 main unit B. BCM50a main unit C. BCM50b main unit D. BCM50e main unit E. BCM expansion unit, D 6

7 QUESTION: 16 Which statement about installing a Nortel Business Communications Manager 50 (BCM50) expansion unit is true? A. A keycode to enable the expansion unit is not required. B. Before installing the BCM50 expansion unit, first install the MBM in it. C. A BCM50 expansion unit can only be installed in an equipment rack. D. A 20 m cable can be used to connect the expansion unit and main unit. QUESTION: 17 A Nortel Business Communications Manager 50 (BCM50) installation requires music and paging. The Nortel BCM50 has a music jack. Rather than using the music jack, what is another way in which music and paging can be connected? A. RJ21 cable B. set screws C. the front panel D. RJ11 jack on chassis Answer: A QUESTION: 18 The Nortel Business Communications Manager 50 (BCM50) Element Manager is a client-based application that runs on PCs with Windows. The Element Manager application must be installed on a PC. From which location can the application be obtained? A. the local ISP B. the router WebGUI C. the Nortel BCM50 web page D. the User Applications web page Answer: C 7

8 QUESTION: 19 You are installing a Nortel Business Communications Manager 50 (BCM50) at a business site. A basic configuration is required to complete the installation, which includes keycode installation. The system must have the configuration saved to an immediate backup destination after the basic configuration is completed. Which statement about the configuration backup is false? A. You can save the configuration backup to the BCM50. B. You can save the configuration backup to an FTP server. C. You can save the configuration backup directly to a CD-ROM. D. You can save the configuration backup to a USB storage device. Answer: C QUESTION: 20 The customer has requested some changes in the IP telephony settings. What part of Element Manager will be used to do this? A. BCM Monitor B. Network Element C. Administration task panel D. Configuration task navigation panel 8