JRC Product Training Courses

Transcription

1 JRC Product Training Courses Introduction JRC is able to supply different types of technical training for service engineers. We can also provide ECDIS Train the Trainer trainings and ECDIS type specific training. All technical trainings are held in the Rotterdam office. ECDIS type specific training or train the trainer audits might take place on board or in a local training centre. In this document you will find the details of our training arrangements. Office and contact details Our office address is : Alphatron Marine B.V. Schaardijk NH Rotterdam Harbour 115 The Netherlands Contact details : Telephone front desk : training department : training@jrc.am Technical support JRC products : technical@jrc.am Hotel arrangements At this moment we have a special contract with the Novotel Brainpark hotel and the Inntelhotel Rotterdam Centre. You will find details of these hotels and shuttle service in the separate document Survival Guide, which you will receive together with the application form. If you would like to have a reservation at Novotel Brainpark hotel or Inntelhotel Rotterdam Centre, we are pleased to make the reservation for you. Please note that the hotel guest has to pay the hotel bill when checking out. 1-9

2 Training rules and requirements The engineer must have at least one year of field experience on the equipment in general (either JRC or other brands) and understand the electronic fundamentals of the type of equipment. If, during training, a lack of general experience/knowledge on the equipment is ascertained, the trainer may decide not to issue a certificate. The cost of the training will not be reimbursed. For ECDIS, VDR and Fleet Broadband training we require that the trainee has basic knowledge of windows operating system, computer architecture, networking and standard NMEA For Radar training we expect the trainee to have basic knowledge of radar systems. For training of Sonar equipment we expect the trainee to have basic knowledge of underwater acoustics. For GMDSS training we expect the trainee to have basic understanding of super heterodyne transceivers and do recommend operator s certificate for GMDSS equipment. For AlphaMidiCourse and AlphaMiniCourse we expect the trainee to have basic knowledge of gyro principles. We expect that the trainees arrive in time for the training and notify us by telephone whenever they are not able to arrive in time for the training. In order to receive a certificate, trainees have to follow the complete course. If any part of the training is not completed then we can not issue certificate. Training normally starts at 09:00 and finishes not later than 16:30. There will be adequate breaks during the day. After finishing training for specific equipment a questionnaire will be handed out. This has to be completed by the trainee. In order to receive a certificate the trainee must score 70%. The trainee is allowed to use all the documents provided on the course when completing the questionnaire. Mobile telephones have to be switched off during training. Emergency use of mobile telephones is discussable. We expect trainees to pay attention to the training and do not use the Internet for web browsing during training. 2-9

3 What do the trainees have to bring During the training we will hand out training documents in pdf format. Trainees have to bring the laptop which they use for service. This is to make sure that the laptop they use is suitable for connecting to our equipment. Software required for opening standard industrial formats files should be installed on the laptop (e.g. VLC LAN, Word, Excel, Adobe reader, Winzip or Winrar, Google Chrome, Mozilla Firefox and Internet Explorer updated to latest versions). It is preferable to carry commonly used cables e.g. straight serial cable (5m), crossed serial cable (5m) and straight CAT-5 cable (5m). However if not available we can supply a limited amount of cables during the training. Also recommendable is to bring USB to serial converter if the laptop does not have a serial port. Please also check if the laptop is able to read/write CF cards and/or PCMCIA cards. If not please bring an external reader. This is especially important for Radar and (S)-VDR training (JCY-1700(S)/1800/1850, 1900/1950). 3-9

4 Which training can we provide? We can provide the following training: Installation, operation and maintenance of RADAR JMA-33xx/1030, JMR-72xx/92xx ECDIS CONNING DISPLAY/BAMS JAN-7202/9202 ROUTE PLANNING JAN-5203 (S)-VDR JCY-1900/1950 DOPPLER LOG JLN-205(MKII)/JLN-550 SATELLITE SPEEDLOG JLN-720* ECHOSOUNDER JFE-380/680/JFC-7050/180BB/800/810 CURRENT METER JLN-650/652/628 FLEETBROADBAND JUE-251/501 GLOBAL EXPRESS JUE-60GX* INMARSAT-C JUE-95LT/95VM/95SA/87 MFHF JSS-2150(N)/2250(N)/2500(N) VHF JHS-770S/780D AIS JHS-183 BNWAS JCX-161 (D)GPS JLR-7600/7900/7500/7800 GPS COMPASS JLR-21/31 SONAR JFP-180, JFP-185, JFS-280 NAVTEX NCR-333 WFAX JAX-9B *Only when we have the equipment. Operation and maintenance of RADAR CHARTRADAR ECDIS CONNING DISPLAY ROUTE PLANNING (S)-VDR FLEETBROADBAND INMARSAT-C MFHF AIS BNWAS GPS COMPASS SONAR JMA-71xx/91xx/53xxMKII/52xxMKII JMA-9xxB JAN-701B/901B/2000(MKII) JAN-701B-CON/901B-CON/2000-CON JAN-1186 JCY-1700(S), JCY-1800/1850 JUE-250/500 JUE-85 JSS-296/596/896 JHS-182 JCX-151/152 JLR-20/30 JFP

5 Type Specific/ Trainer Training ECDIS Train the Trainer training Type Specific Training JAN-701/901M, JAN-701B/901B/2000 JAN-701/901M, JAN-701B/901B/2000 Train the Trainer training (Training B) JAN-9201/7201 Type Specific Training (Training C1 standard classroom training) JAN-9201/7201 Type Specific Training (Training C1 upgrade) JAN-9201/7201 Type specific training (Training C2 on-board) JAN-9201/

6 Technical Training composition and duration Training JRC products Duration Practice Required Maximum of 6 attendees of all technical courses, except AlphaMidiCourse is maximum 4 attendees. OLD RADAR/ECDIS MFD MFD (new software) + BNWAS (S)VDR JMA-7100/9100/900B JMA-5300MKII/5200MKII JAN-901B/701B/2000(MK1+MK2) JMR-7200/9200 JAN-7202/9202 TCS BAMS NEW SOFTWARE BNWAS : JCX-161 JCY-1700(S), JCY-1800/1850 JCY-1900/1950 GMDSS MFHF : JSS-2150(N),JSS2250(N), JSS-2500(N),JSS AIS : JHS-182/183 VHF: JHS-770S/780D INMARSAT-C: JUE-85/95/87 Navtex: NCR days Yes Theory of radar operation Basic knowledge of computer architecture. Basic knowledge of windows XP. Basic understanding of networking. 4 days Yes Theory of radar operation Basic knowledge of computer architecture. Basic knowledge of windows XP. Basic understanding of networking. 4 days Yes Basic knowledge of computer architecture. Basic knowledge of windows XP. Basic understanding of networking. 5 days Yes Laptop used for APT/installation (S)-VDR. Straight LAN cable. 5 days Yes Theory of super heterodyne transceiver GMDSS operators certificate. 6-9

7 Epirb : JQE-103 SART: TRON SART 20 FBB/GX JUE-251/501/JUE-60GX(T) 3 days Yes Basic knowledge of networking. Doppler log Satellite log Echosounder Fishing (D)GPS JLN-550/205(MKII) JLN-720 JFE-380/680 Echosounder : JFC-800/810 (T) Echosounder : JFC-180 (T) Echsounder : JFC-7050 Search light Sonar : JFP-185 (T) Current meter : JLN-650/652 Sonar : JFS-280 Radar : JMA-5200MKII/3300/1030 Satellite Compass : JLR-21/31 JLR-7500/7800/7600/7900 JLR-20/30/21/31 JLN-720(T) 5 day Yes Basic knowledge of underwater acoustics and Doppler effect. 5 day Yes Basic knowledge of underwater acoustics. Theory radar operation. 2 day No Basic knowledge of GPS. Gyro AlphaMidiCourse 2 day Yes Basic knowledge of gyro. Gyro AlphaMiniCourse 1 day Yes Basic knowledge of gyro. 7-9

8 JRC ECDIS Type Specific and Train the Trainer trainings ECDIS type Type of training Duration Requirements Maximum of 4 attendees. JAN-701/901M JAN- 701B/901B/2000 JAN-701/901M JAN- 701B/901B/2000 Train the Trainer 2 days Service partner or distributor. STCW approved training centre. Train the Trainer Audit Train the Trainer B course Validity of certificate = 2 years Type Specific Training C1 standard classroom Type Specific Training C2 standard onboard training Type Specific Training C1/C2 upgrade training 1 day/trainer Attended train the trainer training has to pass audit for certificate. 3 days Service partner or distributor. STCW approved training centre. Written test =>70%. Practical test 1 (40 min/person). Final assessment (2 hrs/person). If more then 4 attendees need two trainers. 2 days Seaman book. Max. 5 attendees. Written test =>70%. Practical test. 1.5 day Seaman book. Max 5 attendees. 1 day Seaman book. Max 5 attendees. Attended Type specific training for previous models JRC Ecdis. 8-9

9 Certificates when changing jobs. The validity of training certificates: when an employee (mostly technicians) goes to a new employer in the same maritime service business, his JRC certificates will become invalid. However, when the ex-employer (JRC agent) agrees, in a written statement, to reissue the certificates, it is possible to apply for new certificates. Please note that this is only if both employers are active in the EMEA region and that a fee may apply. The training department will provide you with the price and documents needed for reissuing. Application for technical training It is only possible to apply for training with the application form we will provide. After reception of your application form, we will inform you if there is availability or if the engineer will be placed on a waiting list. Maximum amount of attendees for the technical training is 6, except for the AlphaMidiCourse where there is a maximum of 4 attendees. We have the right to cancel training 3 weeks before the training will starts, when there are not enough attendees. JRC will inform you 5 weeks ahead if the amount of attendees is not sufficient. Terms of agreement The course registration is binding. This means that upon registration a payment obligation occurs to Alphatron Marine B.V/JRC. Participants can unregister from the course up until 30 days prior to course starts. Cancellation from 30 till 14 days prior course start, 50% of the course fee will be charged. If cancellations is made within 14 days before the course starts, the course will be fully charged. Invoice will be sent after the first day of the course. Alphatron Marine B.V./JRC reserves the right to cancel, move or change course dates before the course starts. The participant will receive practical course information and confirmation of participation 14 days prior to course start. If you receive this order confirmation with incorrect or missing information, please notify training@jrc.am. Welcome to Alphatron Marine B.V./JRC training! Standard Alphatron Marine B.V. terms of agreements and conditions (FME) apply. A copy of which can be provided on request or can be found on our website 9-9