TETRA Interoperability Certificate

Transcription

1 TETRA Interoperability Certificate Motorola, Dimetra IP, SwMI Motorola, MTP830 S, Terminal Copenhagen, January 2011 Latest SwMI SW Release: 7.1 Latest Terminal SW Release: MR5.12LKP Latest SwMI HW Release: 7.1 Latest Terminal HW Release: PT912BFS (Istituto Superiore delle Comunicazioni e delle Tecnologie dell'informazione) certifies, that the Motorola, Dimetra IP, SwMI and the Motorola, MTP830 S, terminal have been subject to interoperability testing for the certified features listed on second page of this certificate, in accordance with the TETRA Interoperability Profiles, TIP compliance Test Plan and related TETRA interoperability requirement tables. The table lists all the available TETRA interoperability profiles, and summarizes the main functionalities of every profile according to the TETRA interoperability requirement tables. A feature is when it has been successfully tested during the last test session with one of the testing method described in the TETRA process document part 1 (TPD001). A breakdown into the feature details is given in the Feature Compliance Overview section of this certificate. Detailed test results and explanation about the procedure used to provide verdicts are listed in the Test Report associated to this Certificate. - V.le America 201, Rome, Italy Ph.: , Fax: tetra_ctc.iscom@sviluppoeconomico.gov.it, Web: Date of issue: 5 July /26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

2 features Tetra Association TTR001-01:Core Registration Group Management Group call Individual call Status messages Pre-emptive Priority Call Emergency Call Cell Re-selection PSTN interconnect MS-ISDN Numbering - In Call Signalling Subscriber Class Procedures Common Secondary Control Channels BS Fallback Operation Energy Economy Mode Transmit Inhibit Mixed band operation Partial Tetra Association TTR001-02:SDS SDS Type 1, 2 or 3 - SDS-TL Store and Forward Tetra Association TTR001-03:DGNA Support for individually addressed DGNA Support for group addressed DGNA Partial Tolerance of unsupported DGNA functions - Tetra Association TTR001-04:Auth 2/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

3 SwMI Initiated (non-mutual) Authentication SwMI Initiated Authentication made Mutual by MS Tetra Association TTR001-05:PD TEI Query - Context Management Single Slot Packet Data Multi Slot Packet Data TEDS - Mixed band operation Tetra Association TTR001-09:AL Ambience Listening Interaction with Transmit Inhibit Tetra Association TTR001-11:AIE Security Class 2 Air Interface Encryption Security Class 3 Air Interface Encryption Security Class 3G Air Interface Encryption Change of CMG and GSKO Key Status demand Change of Security Class for Fallback operation Change of Security Class (other than for Fallback operation) Key Management for Secure Direct Mode Operation Tetra Association TTR001-12:SI MS initiated Service Interaction SwMI initiated Service Interaction Tetra Association TTR001-13:ED Call Waiting - Enable and temporary disable of an MS - Permanent disable of an MS 3/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

4 Tetra Association TTR001-21: Callout Full Callout Partial Simple Callout - Interaction with other services and events Partial Callout Test and Callout Availability - Callout Text and Callout Pre-Coded Status Storage of Callout Information Feature Compliance Overview The first pages of this certificate provide an indication about the main interoperable TETRA features for each TIP specification (as described in the TIC-RT). The main interoperable TETRA features result depend on a set of sub-feature, the verdicts associated to each sub-feature are directly derived from the analysis of the performed test cases. The results associated to each feature and sub-feature are shown in the "Feature compliance report" table below. The main features are indicated with grey background and the associated sub-features (or second level features) have white background. The verdict assigned to a sub-feature as shown on page 2, is derived by the Feature compliance report tables. Verdict Partial _ Definition All required tests have been performed and passed Not all the required tests have been performed but none have failed Feature cannot be certified e.g. it is not supported by at least one product, no tests were performed, or some tests were performed but at least one failed 4/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

5 The verdict assigned to a sub feature is the result of an analysis of the test case results listed in the Test Report. The verdict assigned to each sub-feature is derived from one or several test case results or test steps result, the TETRA Interoperability requirement tables (TIC-RTs) indicate the link between subfeatures and test cases for the certified set of equipment capabilities (see Test Report) Verdict Passed (note x) Time_limited Definition All mandated tests or steps of tests linked to this functionality (as per TIC-RT indication) are compliant with the TIP specification relevant to this feature. A note can be associated to this result, if further clarification on the behaviour of the equipment is needed Not all Mandated tests (as per TIC-RT indication) have been executed (ran out of time) The verdict associated to the feature gives also indication about the method used to test that feature. The allowed testing Methods are listed in the table below, a complete description of the procedures and constraints associated to each of them can be found in the "TPD001 TETRA Interoperability Certification Process Description" document. Testing Method Spot Regression Description All mandated tests associated to the feature have been executed Only a selection of the mandatory test cases associated to the feature has been executed during the test session. These tests are a subset of the tests performed on an equivalent software which has been "completely" tested against the same functionality on a different equipment, see manufacturer declaration in annex A Only a selection of the mandatory test cases associated to the feature has been executed during the test session. These tests are a subset 5/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

6 Regression on spot of the tests performed on a previous version of the same software which has been "completely" tested in a previous test session against the same functionality, see manufacturer definition in annex A The regression method has been applied on the verdicts based on the spot testing method Depending on equipment capabilities declared by the manufacturer, some features or sub features cannot be tested. The following table describes meaning of the used abbreviation Indication Definition The SwMI and/or MS do not support the minimum features required to verify these items. has made every effort to ensure that every result has been correctly evaluated in accordance with the relevant TIPs, Test Plans and TIC-RTs. has no liability for the test results, or towards the manufacturers, The table on the following page lists HW and SW releases of SwMI and Terminal under test in the last four test sessions and the used TIP specifications, Test Plans and TIC-RTs This Certificate and Certificates from previous test sessions are available on the TETRA Association web site ( The feature results are shown in the tables below 6/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

7 Information on equipment under test and document references Test Session SwMI Type SwMI HW Release SwMI SW Release Terminal Type Terminal HW Release Terminal SW Release TIP Specs and TIP Compliance Test Plans Motorola Copenhagen January 2011 Dimetra IP MTP830 S PT912BFS MR5.12LKP Core TTR v5.1.1 IOP v2.6.4 TIC-RT v250 SDS TTR v2.0.1 IOP v2.0.0 TIC-RT v211 DGNA TTR v2.0.0 IOP v2.0.1 TIC-RT v220 Auth TTR v3.0.0 IOP v2.0.0 TIC-RT v222 7/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

8 PD TTR v3.0.0 IOP v3.0.2 TIC-RT v300 AL TTR v2.0.0 IOP v1.1.0 TIC-RT v121 AIE TTR v3.0.0 IOP v3.0.0 TIC-RT v3018 SI TTR v1.0.0 IOP v1.0.0 TIC-RT v125 ED TTR v2.0.0 IOP v1.0.0 TIC-RT v143 Callout TTR v1.0.0 IOP v1.0.0 TIC-RT v101 8/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

9 Feature compliance report Test Session Motorola Copenhagen January 2011 Core Registration ITSI attach SwMI initiated location updating LA timer based Periodic location updating De-registration Group Management Single group attachment Multiple group attachment MS initiated group detachment SwMI initiated group management Group call Normal group call 9_pass_of_9 9_pass_of_9 9/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

10 Late entry Priority Group scanning Call setup modifications Resource Queuing based on Call Priority Broadcast Call Limited coverage notification Individual call Simplex individual call Duplex individual call Call setup modifications Resource Queuing based on Call Priority Indication of imminent call disconnection Status messages Individual addressed Status transfer Group addressed Status transfer 7_pass_of_7 10/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

11 Pre-emptive Priority Call Pre-emption of Resources Pre-emption of Busy Users Emergency Call Pre-emption of Resources Pre-emption of Busy Users Call setup modifications Call disconnection by non-call owner Cell Re-selection Undeclared Unannounced Announced - with Call Restoration Announced - without Call Restoration Expedited PSTN interconnect 16_pass_of_16 7_pass_of_7 8_pass_of_8 11/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

12 TETRA Originated Call PSTN Originated Call DTMF over-dial Emergency Telephone Calls MS-ISDN Numbering MS ISDN - Voice Call MS-ISDN Status In Call Signalling Slow Signalling on Traffic Channel (SACCH) Fast Signalling on Traffic Channel (FACCH) Subscriber Class Procedures Cell Selection based on Subscriber Class Subscriber Class Delivery during Location Update Use of Preferred Subscriber Classes 5_pass_of_5 12/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

13 Common Secondary Control Channels One C-SCCH per cell Two C-SCCH per cell Three C-SCCH per cell BS Fallback Operation Switch to/from BS Fallback Operation Roaming with BS Fallback Operation Services with BS Fallback Operation Energy Economy Mode Energy Economy Mode Operation Transmit Inhibit TXI Activation & De-Activation without Status message 7_pass_of_7 No_Equipment 8_pass_of_12 No_Equipment 2_pass_of_6 5_pass_of_5 13/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

14 TXI Activation & De-Activation with Status message Receipt of group addressed service during TXI Mixed band operation Mixed band operation, inter-cell Mixed band operation, intra-cell Mixed band operation, Full Short Data Service (SDS) SDS Type 1, 2 or 3 SDS Type 1 SDS Type 2 SDS Type 3 SDS-TL Individually Addressed Group Addressed Using MS-ISDN dialling 8_pass_of_8 14/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

15 Using UCS2 coding scheme Using 7-bit coding scheme Store and Forward Individually Addressed Group Addressed Dynamic Group Number Assignment (DGNA) Support for individually addressed DGNA Support for individually addressed DGNA assignment without attachment Support for individually addressed DGNA assignment with attachment as selected group Support for individually addressed DGNA assignment with attachment as scanned group Support for individually addressed DGNA assignment with rejected attachment Support for individually addressed assigment for pre-programmed group Support for group addressed DGNA 6_pass_of_6 No_Equipment 3_pass_of_6 15/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

16 Support for group addressed DGNA assignment Management of 'group assignment lifetime' Support for group addressed DGNA deassignment Tolerance of unsupported DGNA functions MS tolerance of unsupported individual addressed DGNA signalling MS tolerance of unsupported group addressed DGNA signalling No_Equipment 1_pass_of_3 No_Equipment 1_pass_of_2 Authentication SwMI Initiated (non-mutual) Authentication Attach with authentication Roaming with authentication SwMI rejects MS during authentication MS rejects SwMI during authentication SwMI Initiated Authentication made Mutual by MS Attach with authentication 16/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

17 Roaming with authentication TEI Query TEI Query Operation TETRA Packet Data Context Management Context Activation User authentication Single Slot Packet Data Data Transfer Cell re-selection Multi Slot Packet Data Data Transfer TEDS TEDS with Context Activation TEDS Data Transmission 11 7_pass_of_7 10_pass_of_10 7_pass_of_7 17/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

18 TEDS Cell Reselection Mixed band operation Mixed band operation, inter-cell Mixed band operation, intra-cell Mixed band operation, Full TETRA Ambience Listening (SS-AL) Ambience Listening SS-AL Call Setup MS initiated SS-AL disconnection No Indication to affected user Interaction with Transmit Inhibit AL can override TxI AL cannot override TxI 5_pass_of_5 5_pass_of_5 18/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

19 Air Interface Encryption Security Class 2 Air Interface Encryption Location Updating and AI Signalling Protection TM-SCK provisioning during location updating Communications between parties using encryption Communications between clear and encrypted parties Communications between encrypted parties on a channel designated to operate in clear OTAR and Change of TM-SCK Security Class 3 Air Interface Encryption Location Updating and AI Signalling Protection DCK Forwarding at MS request DCK Forwarding by SwMI (without MS request) 18_pass_of_18 7_pass_of_7 19_pass_of_19 9_pass_of_9 19/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

20 DCK Retrieval CCK provisioning during location updating Communications between parties using encryption Communications between clear and encrypted parties Communications between encrypted parties on a channel designated to operate in clear OTAR and Change of CCK Security Class 3G Air Interface Encryption GCK Key Association setting Communications between parties using encryption Communications between clear and encrypted parties OTAR and Change of GCK Change of CMG and GSKO OTAR and change of CMG and GSKO 9_pass_of_9 5_pass_of_5 5_pass_of_5 20/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

21 Key Status demand SCK Key Status demand GCK Key Status demand GSKO Key Status demand Change of Security Class for Fallback operation Seamless change to Security Class 2 for BS Fallback operation Non-seamless change to Security Class 2 for BS Fallback operation Provisioning of TM-SCK for fallback to Security Class 2 operation Change to Security Class 1 for BS Fallback operation Change of Security Class (other than for Fallback operation) Change between Security Class 3 and Security Class 3G 12_pass_of_12 10_pass_of_10 5_pass_of_5 21/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

22 Change between Security Class 2 and Security Class 3 Change from Security Class 3G to Security Class 2 Key Management for Secure Direct Mode Operation OTAR and change of DM-SCK Service Interaction MS initiated Service Interaction MS initiated Circuit Mode Call during another Circuit Mode Call MS initiated Circuit Mode Call during Packet Mode Transfer MS initiated Packet Mode Transfer during Circuit Mode Call SwMI initiated Service Interaction SwMI initiated Circuit Mode Call during another Circuit Mode Call SwMI initiated Circuit Mode Call during Packet Mode Transfer 6_pass_of_6 22/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

23 SwMI initiated Packet Mode Transfer during Circuit Mode Call Call Waiting Call Waiting in Individual Call Call Waiting in Group Call Enable Disable Enable and temporary disable of an MS Enable and temporary disable of an MS without authentication Enable and temporary disable of an MS with authentication Registration of a temporary disabled MS Rejection of applicable invalid enable/disable requests Removable SIMs do not affect the subscriber or equipment that has been enabled/disabled Disabling of an MS during a call or while on the PDCH Permanent disable of an MS Permanent disable of an MS with authentication Permanently Disabled MS cannot send air interface signalling FAILED 7_pass_of_8 FAILED 0_pass_of_1 23/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

24 Callout Full Callout Individually Addressed Full Callout with request for Terminal Receipt message and with request for User Receipt message Group Addressed Full Callout without request for Terminal Receipt message and without request for User Receipt message Using current selected group during Full Callout Full Callout with immediate change to Callout Group Full Callout with change to Callout Group on non-rejecting user response Full Callout with rejecting User Receipt message Full Callout with timeout for User Receipt message Callout Incident Information messages Group Call to Callout Group End of Full Callout Time_Limited 15_pass_of_16 Time_Limited 3_pass_of_4 Simple Callout Individually Addressed Callout with request for Terminal Receipt message and with request for User Receipt message Individually Addressed Callout with request for Terminal Receipt message and without request for User Receipt message Group Addressed Callout without request for Terminal Receipt message and without request for User Receipt message Group Addressed Callout without request for Terminal Receipt message and with request for User Receipt message 24/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

25 Simple Callout with rejecting User Receipt message Simple Callout with timeout for User Receipt message Interaction with other services and events Interaction with previous Callout Interaction with emergency call Interaction with non-emergency call Interaction with data and status Interaction with local services Manual exit Callout Test and Callout Availability Callout Test Callout Availability Callout Text and Callout Pre-Coded Status Callout Text Concatenated Callout Text Callout Pre-Coded Status Storage of Callout Information Viewing Callout information from previous Callout(s) Deletion of Callout information from previous Callout(s) Time_Limited 21_pass_of_23 Time_Limited 5_pass_of_7 11 7_pass_of_7 25/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it

26 Annex A List of Revisions of the Certificate Date Ver. Modification 24 June First published version 5 Jul updating: - editorial changes regarding the name of the terminal - addition of the Callout feature 26/26 - tetra_ctc.iscom@isviluppoeconomico.gov.it