TETRA Interoperability Certificate. Hytera, MT680 Plus, Terminal. Kraków, September 2017

Transcription

1 : ISCTI TETRA Interoperability Certificate Motorola Solutions, Dimetra IP R9.0, SwMI Kraków, September 2017 Latest SwMI SW Release: Latest SwMI HW Release: R9.0 Dimetra IP R9.0 Latest Terminal SW Release: Latest Terminal HW Release: V ISCTI (Istituto Superiore delle Comunicazioni e delle Tecnologie dell'informazione) certifies, that the Motorola Solutions, Dimetra IP R9.0, SwMI and the Hytera, MT680 Plus, terminal have been subject to interoperability testing for the certified features listed on second page of this certificate, in accordance with the TETRA Interoperability Profiles, TIP compliance Test Plan and related TETRA interoperability requirement tables. The table lists all the available TETRA interoperability profiles, and summarizes the main functionalities of every profile according to the TETRA interoperability requirement tables. A feature is when it has been successfully tested during the last test session with one of the testing method described in the TETRA process document part 1 (TPD001-01). A breakdown into the feature details is given in the Feature Compliance Overview section of this certificate. This certificate has been issued following a multiple test session between Motorola Solutions and Hytera on September Detailed test results are listed in the Test Report associated to this Certificate. Details and explanation about the procedure used to provide verdicts are in the TIC process TPD IOP test engineer Head of the Procedure Radio Office Manager ISCTI - V.le America 201, Rome, Italy Ph.: , Fax: tetra_ctc.iscom@mise.gov.it, Web: Date of issue: 28 February /23

2 features TTR001-01:Core Registration Group Management Group call Individual call Status messages Pre-emptive Priority Call Emergency Call Cell Re-selection PSTN interconnect MS-ISDN Numbering - In Call Signalling Subscriber Class Procedures Common Secondary Control Channels BS Fallback Operation Energy Economy Mode - Transmit Inhibit Mixed band operation TTR001-02:SDS SDS Type 1, 2 or 3 - SDS-TL Store and Forward Multipart SDS - TTR001-03:DGNA Support for individually addressed DGNA Support for group addressed DGNA 2/23

3 Tolerance of unsupported DGNA functions - TTR001-04:Auth SwMI Initiated (non-mutual) Authentication SwMI Initiated Authentication made Mutual by MS TEI Query - TTR001-05:PD Context Management Single Slot Packet Data Multi Slot Packet Data TEDS - Mixed band operation - TTR001-09:AL Ambience Listening Interaction with Transmit Inhibit TTR001-10:E2EE E2EE Voice Call TTR001-11:AIE Security Class 2 Air Interface Encryption Security Class 3 Air Interface Encryption Security Class 3G Air Interface Encryption - Management of CMG and GSKO - Key Status demand - Change of Security Class for Fallback operation - Change of Security Class (other than for Fallback operation) - Key Management for Secure Direct Mode Operation - TTR001-12:SI MS initiated Service Interaction SwMI initiated Service Interaction Call Waiting - 3/23

4 TTR001-13:ED Enable and temporary disable of an MS Permanent disable of an MS TTR001-14:TKD Delivery of Authentication Data Delivery of SCK Delivery method TTR001-17:RUA Radio User Assignment TTR001-19:LIP Location Information Protocol TTR001-20:CF Call Forwarding Unconditional Call Forwarding Conditional Call Forwarding Information Displayed Management of Call Forwarding - TTR001-21:Callout Full Calllout Simple Callout Interaction with other services and events (Note 1) Callout Test and Callout Availability -(Note 1) Callout Text and Callout Pre-Coded Status Storage of Callout Information Note 1: a TIC-RT declaration was changed after the start of the test session. Due to a human error the original declaration was filled out wrongly. Please refer to the Test Report for details. Feature Compliance Overview 4/23

5 The first pages of this certificate provide an indication about the main interoperable TETRA features for each TIP specification (as described in the TIC-RT). The main interoperable TETRA features results depend on a set of sub-features, the verdicts associated to each sub-feature are directly derived from the analysis of the performed test cases. The results associated to each feature and sub-feature are shown in the "Feature Compliance Report" table below. The main features are indicated with blue background and the associated subfeatures (or second level features) have a white background. The outcome assigned to a feature as shown on page 2, is derived by the Feature Compliance Report tables. Outcome Partial - Definition All required tests have been performed and passed Not all the required tests have been performed but none have failed Feature cannot be certified e.g. it is not supported by at least one product, no tests were performed, or some tests were performed but at least one failed The outcome is derived from the verdict assigned to a sub feature which is the result of an analysis of the test case results listed in the Test Report. The verdict assigned to each sub-feature is derived from one or several test case results or test steps result, the TETRA Interoperability requirement tables (TIC-RTs) indicate the link between sub-features and test cases for the certified set of equipment capabilities (see Test Report). Verdict Passed Incomplete Failed Definition All mandated tests or steps of tests linked to this functionality (as per TIC-RT indication) are compliant with the TIP specification relevant to this feature or sub-feature Not all Mandated tests (as per TIC-RT indication) have been executed At least one of mandated test or steps of tests linked to this functionality failed to match the TIP specification relevant to this feature or sub-feature The verdict associated to the feature or sub-feature gives also indication about the method used to test that feature or sub-feature. The allowed testing Methods are listed in the table below, a complete description of the procedures and constraints associated to each of them can be found in the "TPD TETRA Interoperability Certification Process Description" document. 5/23

6 Testing Method Complete Spot Regression Regression on spot Witnessed Description All mandated tests associated to the feature or sub-feature have been executed Only a selection of the mandatory test cases associated to the feature or sub-feature has been executed during the test session. These tests are a subset of the tests performed on an equivalent software which has been "completely" tested against the same functionality on a different equipment, see manufacturer declaration in the associated Test Report Only a selection of the mandatory test cases associated to the feature or sub-feature has been executed during the test session. These tests are a subset of the tests performed on a previous version of the same software which has been "completely" tested in a previous test session against the same functionality, see manufacturer definition in the associated Test Report The regression method (see the previous item) has been applied at this session on the verdicts from the referenced (previous) session where the spot testing method (see above) had been applied. The TIP heading lines in the Feature Compliance Report indicate whether each TIP is partially or fully witnessed by the Certification Body. Additionally, for a partially-witnessed TIP, the number of witnessed test cases that passed is shown for each the feature and sub-feature. There may have been some unwitnessed passed tests and they will have been found to be successful based on the log file evaluation Depending on equipment capabilities declared by the manufacturer, some features or sub features cannot be tested. The following table describes meaning of the used abbreviation: Indication Not supported Definition The SwMI and/or MS do not support the minimum features required to verify these items ISCTI has made every effort to ensure that every result has been correctly evaluated in accordance with the relevant TIPs, Test Plans and TIC-RTs. ISCTI has no liability for the test results, or towards the manufacturers. 6/23

7 The table on the following page lists HW and SW releases of SwMI and Terminal under test in the last four test sessions and the used TIP specifications, Test Plans and TIC-RTs. This Certificate and Certificates from previous test sessions are available on the TCCA web site ( The feature results are shown in the tables below. Information on equipment under test and document references Test Session Date/Place SwMI Type SwMI HW Release Motorola Solutions, Kraków, September 2017 Dimetra IP R9.0 Dimetra IP R9.0 SwMI SW Release Terminal Type R9.0 MT680 Plus Terminal HW Release Terminal SW Release V3.08 TIP Specs and TIP Compliance Test Plans Core SDS TTR v6.2.2 IOP v3.2.1 TIC-RT v271 TTR v2.1.3 IOP v2.1.0 TIC-RT v222 7/23

8 DGNA Auth PD AL E2EE AIE SI ED TKD RUA LIP CF TTR v2.0.0 IOP v2.0.1 TIC-RT v228 TTR v3.0.0 IOP v2.0.0 TIC-RT v230 TTR v4.1.0 IOP v4.1.0 TIC-RT v405 TTR v2.1.0 IOP v1.2.0 TIC-RT v129 TTR v2.1.0 IOP v1.2.0 TIC-RT v128 TTR v3.1.0 IOP v3.1.0 TIC-RT v331 TTR v1.1.0 IOP v1.0.0 TIC-RT v133 TTR v2.1.0 IOP v1.0.0 TIC-RT v151 TTR v1.0.3 IOP v1.2.0 TIC-RT v122 TTR v1.1.0 IOP v1.0.0 TIC-RT v114 TTR v1.1.0 IOP v1.2.0 TIC-RT v114 TTR v1.0.1 IOP v1.0.0 TIC-RT v114 8/23

9 Callout SwMI Test bench Callout Application SW Release TTR v2.1.1 IOP v2.2.0 TIC-RT v114 -Call Out Console v2.7.0 re0 - SDTS R Feature compliance report Test Session Motorola Solutions, September 2017 Krakow Core - Fully Witnessed Testing Registration Initial registration SwMI initiated location updating LA timer based Periodic location updating De-registration Group Management Single group attachment Multiple group attachment MS initiated group detachment 1_pass_of_6 Spot 0_pass_of_3 2_pass_of_11 1_pass_of_5 1_pass_of_4 9/23

10 SwMI initiated group management Group call Normal group call Late entry Priority Group scanning Call setup modifications Resource Queuing based on Call Priority Broadcast Call Limited coverage notification Individual call Simplex individual call Duplex individual call Call setup modifications Resource Queuing based on Call Priority Indication of imminent call disconnection Status messages Individual addressed Status transfer Group addressed Status transfer Pre-emptive Priority Call Pre-emption of Resources Pre-emption of Busy Users Emergency Call Pre-emption of Resources 2_pass_of_9 Spot 0_pass_of_3 Spot 0_pass_of_3 PASSED Complete 1_pass_of_1 PASSED Complete 1_pass_of_1 1_pass_of_7 Spot 0_pass_of_3 PASSED Complete 1_pass_of_1 PASSED Complete 1_pass_of_1 10/23

11 Pre-emption of Busy Users Call setup modifications Call disconnection by non-call owner Cell Re-selection Undeclared Unannounced Announced - with Call Restoration Announced - without Call Restoration Expedited Graceful Service Degradation Mode (GSDM) PSTN interconnect TETRA Originated Call PSTN Originated Call DTMF over-dial Emergency Telephone Calls MS-ISDN Numbering MS ISDN - Voice Call MS-ISDN Status In Call Signalling Slow Signalling on Traffic Channel (SACCH) Fast Signalling on Traffic Channel (FACCH) Subscriber Class Procedures Cell Selection based on Subscriber Class 4_pass_of_22 Spot 0_pass_of_3 2_pass_of_11 2_pass_of_7 1_pass_of_4 1_pass_of_5 1_pass_of_4 2_pass_of_6 11/23

12 Subscriber Class Delivery during Location Update Use of Subscriber Class Preference Levels Common Secondary Control Channels One C-SCCH per cell Two C-SCCH per cell Three C-SCCH per cell BS Fallback Operation Switch to/from BS Fallback Operation Roaming to avoid a cell in BS Fallback Operation Services with BS Fallback Operation Ignore a cell in Fallback Operation User selectable Fallback behaviour Energy Economy Mode Energy Economy Mode Operation Transmit Inhibit TXI Activation & De-Activation TXI Activation & De-Activation with TxI Status available to the Dispatcher Receipt of group addressed service during TXI Mixed band operation Mixed band operation, inter-cell Mixed band operation, intra-cell Mixed band operation, Full 1_pass_of_7 1_pass_of_5 3_pass_of_10 2_pass_of_5 4_pass_of_9 2_pass_of_4 2_pass_of_4 Spot 0_pass_of_4 Spot 0_pass_of_4 Spot 0_pass_of_3 Spot 0_pass_of_3 SDS - Fully Witnessed Testing 12/23

13 SDS Type 1, 2 or 3 SDS Type 1 SDS Type 2 SDS Type 3 SDS-TL 2_pass_of_12 Individually Addressed Spot 0_pass_of_3 Group Addressed Using MS-ISDN dialling SDS Reception 2_pass_of_6 Using UCS2 coding scheme Using 7-bit coding scheme Using 8-bit Latin 1 coding scheme Using 8-bit Latin/Cyrillic coding scheme Using 8-bit Latin 9 coding scheme Store and Forward Individually Addressed Group Addressed Multipart SDS Multipart SDS DGNA - Fully Witnessed Testing Support for individually addressed DGNA Support for individually addressed DGNA assignment without attachment Support for individually addressed DGNA assignment with attachment as selected group 2_pass_of_6 1_pass_of_4 13/23

14 Support for individually addressed DGNA assignment with attachment as scanned group Support for individually addressed DGNA assignment with rejected attachment Support for individually addressed assigment for pre-programmed group Support for group addressed DGNA Support for group addressed DGNA assignment Management of 'group assignment lifetime' Support for group addressed DGNA deassignment Tolerance of unsupported DGNA functions MS tolerance of unsupported individual addressed DGNA signalling MS tolerance of unsupported group addressed DGNA signalling SwMI Initiated (non-mutual) Authentication Attach with authentication Roaming with authentication SwMI rejects MS during authentication MS rejects SwMI during authentication SwMI Initiated Authentication made Mutual by MS Attach with authentication Roaming with authentication TEI Query TEI Query Operation 2_pass_of_4 1_pass_of_5 Auth - Fully Witnessed Testing PASSED Complete 1_pass_of_1 PD - Fully Witnessed Testing 14/23

15 Context Management Context Activation User authentication Single Slot Packet Data Data Transfer Cell re-selection Packet Data Channel sharing Multi Slot Packet Data Data Transfer TEDS TEDS with Context Activation TEDS Data Transmission, using LLC Optimisation TEDS Cell Reselection, using LLC Optimisation 2_pass_of_11 2_pass_of_7 Spot 0_pass_of_4 2_pass_of_9 1_pass_of_5 Mixed band operation Mixed band operation, inter-cell Mixed band operation, intra-cell Mixed band operation, Full AL - Fully Witnessed Testing Ambience Listening SS-AL Call Setup MS initiated SS-AL disconnection No Indication to affected user PASSED Complete 1_pass_of_1 15/23

16 Interaction with Transmit Inhibit AL can override TxI AL cannot override TxI E2EE - Fully Witnessed Testing E2EE Voice Call Individual (P2P) call Group (P2MP) call Clear Voice Override (CVO): Acceptance Clear Voice Override (CVO): User Initiated Clear Voice Override (CVO): Automatic 1_pass_of_6 1_pass_of_4 AIE - Fully Witnessed Testing Security Class 2 Air Interface Encryption Location Updating and AI Signalling Protection TM-SCK provisioning during location updating Communications between parties using encryption Communications between clear and encrypted parties Communications between encrypted parties on a channel designated to operate in clear OTAR of TM-SCK Change of TM-SCK Packet Data with Class 2 Air Interface Encryption Tolerance of SwMI not supporting SCK-OTAR Security Class 3 Air Interface Encryption 4_pass_of_15 2_pass_of_4 3_pass_of_20 16/23

17 Clear Location Updating and AI Signalling Protection Encrypted Location Updating and AI Signalling Protection DCK Forwarding at MS request DCK Forwarding by SwMI (without MS request) DCK Retrieval CCK provisioning during location updating Communications between parties using encryption Communications between clear and encrypted parties Communications between encrypted parties on a channel designated to operate in clear OTAR of CCK Change of CCK Packet Data with Class 3 Air Interface Encryption Security Class 3G Air Interface Encryption GCK Key Association setting Communications between parties using encryption Communications between clear and encrypted parties OTAR of GCK Change of GCK Management of CMG and GSKO OTAR and change of CMG and GSKO Key Status demand SCK Key Status demand GCK Key Status demand Spot 0_pass_of_4 Spot 0_pass_of_4 1_pass_of_4 17/23

18 GSKO Key Status demand Change of Security Class for Fallback operation Seamless change to Security Class 2 for BS Fallback operation Non-seamless change to Security Class 2 for BS Fallback operation Provisioning of TM-SCK for fallback to Security Class 2 operation Change to Security Class 1 for BS Fallback operation Change of Security Class (other than for Fallback operation) Change between Security Class 3 and Security Class 3G Change between Security Class 2 and Security Class 3 Change from Security Class 3G to Security Class 2 Key Management for Secure Direct Mode Operation OTAR of DM-SCK Change of DM-SCK SI - Fully Witnessed Testing MS initiated Service Interaction MS initiated Circuit Mode Call during another Circuit Mode Call MS initiated Circuit Mode Call during Packet Mode Transfer MS initiated Packet Mode Transfer during Circuit Mode Call SwMI initiated Service Interaction SwMI initiated Circuit Mode Call during another Circuit Mode Call 2_pass_of_8 2_pass_of_6 18/23

19 SwMI initiated Circuit Mode Call during Packet Mode Transfer SwMI initiated Packet Mode Transfer during Circuit Mode Call Call Waiting Call Waiting in Individual Call Call Waiting in Group Call Enable and temporary disable of an MS Enable and temporary disable of an MS without authentication Enable and temporary disable of an MS with authentication Registration of a temporary disabled MS Rejection of applicable invalid enable/disable requests Removable SIMs do not affect the subscriber or equipment that has been enabled/disabled Disabling of an MS during a call or while on the PDCH Permanent disable of an MS Permanent disable of an MS with authentication Permanently Disabled MS cannot send air interface signalling Delivery of Authentication Data Authentication Key Delivery ITSI Delivery Delivery of SCK SCK Delivery to SCK delivery ED - Fully Witnessed Testing 2_pass_of_5 TKD - Fully Witnessed Testing 2_pass_of_3 PASSED Complete 1_pass_of_1 19/23

20 SCK Delivery to SwMI SCK Delivery to SCK loading Delivery method Plain text on physical media Encrypted text on physical media Electronic transfer PASSED Complete 1_pass_of_1 2_pass_of_4 2_pass_of_4 RUA - Fully Witnessed Testing Radio User Assignment Radio User Assignment at Location Updating Dispatcher initiated Radio User Assignment 3_pass_of_14 2_pass_of_6 Radio User Dis-assignment 1_pass_of_6 LIP - Fully Witnessed Testing Location Information Protocol LIP over SDS LIP over Packet Data Time based reporting Distance based reporting - NOT TESTABLE Reporting using Short reports Reporting using Long reports Reporting Enable & Disable User control of Reporting Temporary reporting control 4_pass_of_16 2_pass_of_8 1_pass_of_4 20/23

21 Trigger modification Control of Basic Location Parameters Immediate Location Reporting Reporting Lifetimes Error Reporting using Long Reports Error Reporting using Short Reports Positioning on Individual Call Setup Call Forwarding Unconditional Call Forwarding Unconditional Individual Call Call Forwarding Unconditional SDS Call Forwarding Unconditional Status Call Forwarding Conditional Call Forwarding Conditional Individual Call Call Forwarding Information Displayed Call Forwarding Information Displayed Management of Call Forwarding Change of Call Forwarding Activation Status by Served User Setting of Call Forwarding Parameters by Served User PASSED Complete 1_pass_of_1 CF - Fully Witnessed Testing 1_pass_of_4 1_pass_of_4 Callout - Fully Witnessed Testing Full Calllout Individually Addressed Full Callout with request for Terminal Receipt message and with request for User Receipt message 3_pass_of_15 21/23

22 Group Addressed Full Callout without request for Terminal Receipt message and without request for User Receipt message Using current selected group during Full Callout Full Callout with immediate change to Callout Group Full Callout with change to Callout Group on non-rejecting user response Full Callout with rejecting User Receipt message Full Callout with timeout for User Receipt message Callout Incident Information messages Group Call to Callout Group End of Full Callout Simple Callout Individually Addressed Callout with request for Terminal Receipt message and with request for User Receipt message Individually Addressed Callout with request for Terminal Receipt message and without request for User Receipt message Group Addressed Callout without request for Terminal Receipt message and without request for User Receipt message Group Addressed Callout without request for Terminal Receipt message and with request for User Receipt message Simple Callout with rejecting User Receipt message Simple Callout with timeout for User Receipt message Spot 0_pass_of_4 1_pass_of_6 PASSED Complete 1_pass_of_1 22/23

23 Interaction with other services and events Interaction with previous Callout Interaction with emergency call Interaction with non-emergency call Interaction with data and status Interaction with local services Manual exit Callout Test and Callout Availability Callout Test Callout Availability Callout Availability request Callout Text and Callout Pre-Coded Status Callout Text Concatenated Callout Text using Callout Specific Concatenation Concatenated Callout Text using msds Callout Pre-Coded Status Storage of Callout Information Viewing Callout information from previous Callout(s) Deletion of Callout information from previous Callout(s) 5_pass_of_25 Spot 0_pass_of_4 3_pass_of_11 2_pass_of_6 5_pass_of_10 1_pass_of_5 4_pass_of_5 23/23