TETRA Interoperability Certificate. Motorola Solutions, Dimetra IP R8.2, SwMI. Krakow, April 2014

Transcription

1 : ISCTI TETRA Interoperability Certificate Motorola Solutions, Dimetra IP R8.2, SwMI Krakow, April 2014 Latest SwMI SW Release: 8.2 Latest Terminal SW Release: MR10.7 Latest SwMI HW Release: Dimetra IP R8.2 Latest Terminal HW Release: PT912OHE ISCTI (Istituto Superiore delle Comunicazioni e delle Tecnologie dell'informazione) certifies, that the Motorola Solutions, Dimetra IP R8.2, SwMI and the Motorola Solutions, MTP3250, terminal have been subject to interoperability testing for the certified features listed on second page of this certificate, in accordance with the TETRA Interoperability Profiles, TIP compliance Test Plan and related TETRA interoperability requirement tables. The table lists all the available TETRA interoperability profiles, and summarizes the main functionalities of every profile according to the TETRA interoperability requirement tables. A feature is when it has been successfully tested during the last test session with one of the testing method described in the TETRA process document part 1 (TPD001-01). A breakdown into the feature details is given in the Feature Compliance Overview section of this certificate. This certificate has been issued following a fully witnessed multi test session between Motorola Solutions and Motorola Solutions on April Detailed test results are listed in the Test Report associated to this Certificate. Details and explanation about the procedure used to provide verdicts are in the TIC process TPD This v3 Certificate has been re-issued, because it has been recognized that the change of declarations for group addressed Full Callout was in contradiction with the TIC process. The result of the Callout tests and are not valid because the Callout host application simulator which was used to support the testing was not TIP compliant. To reflect this fact the test result Not Applicable (N/A) was applied to these two tests. IOP test engineer Head of the Procedure Radio Office Manager ISCTI - V.le America 201, Rome, Italy Ph.: , Fax: tetra_ctc.iscom@mise.gov.it, Web: Date of issue 24 March 2016 v3 1/26 v3

2 features Tetra Association TTR001-01:Core Registration Group Management Group call Individual call Status messages Pre-emptive Priority Call Emergency Call Cell Re-selection PSTN interconnect MS-ISDN Numbering - In Call Signalling Subscriber Class Procedures Common Secondary Control Channels BS Fallback Operation Energy Economy Mode Transmit Inhibit Mixed band operation Tetra Association TTR001-02:SDS SDS Type 1, 2 or 3 - SDS-TL Store and Forward Tetra Association TTR001-03:DGNA Support for individually addressed DGNA - 2/26 v3

3 Support for group addressed DGNA Partial Tolerance of unsupported DGNA functions - Tetra Association TTR001-04:Auth SwMI Initiated (non-mutual) Authentication SwMI Initiated Authentication made Mutual by MS TEI Query - Tetra Association TTR001-05:PD Context Management Single Slot Packet Data Multi Slot Packet Data Mixed band operation Tetra Association TTR001-09:AL Ambience Listening Interaction with Transmit Inhibit Tetra Association TTR001-11:AIE Security Class 2 Air Interface Encryption Security Class 3 Air Interface Encryption Security Class 3G Air Interface Encryption Change of CMG and GSKO Key Status demand Change of Security Class for Fallback operation Change of Security Class (other than for Fallback operation) Key Management for Secure Direct Mode Operation Tetra Association TTR001-12:SI MS initiated Service Interaction SwMI initiated Service Interaction TEDS - 3/26 v3

4 Call Waiting - Tetra Association TTR001-13:ED Enable and temporary disable of an MS Permanent disable of an MS Tetra Association TTR001-14:TKD Delivery of Authentication Data Delivery of SCK Delivery method Tetra Association TTR001-17:RUA Radio User Assignment Tetra Association TTR001-19:LIP Location Information Protocol Tetra Association TTR001-21:Callout Full Callout Simple Callout - Interaction with other services and events - Callout Test and Callout Availability - Callout Text and Callout Pre-Coded Status Storage of Callout Information 4/26 v3

5 Feature Compliance Overview The first pages of this certificate provide an indication about the main interoperable TETRA features for each TIP specification (as described in the TIC-RT). The main interoperable TETRA features result depend on a set of sub-feature, the outcomes associated to each sub-feature are directly derived from the analysis of the performed test cases. The results associated to each feature and sub-feature are shown in the "Feature compliance report" table below. The main features are indicated with grey background and the associated sub-features (or second level features) have light blue background. The outcome assigned to a sub-feature as shown on page 2, is derived by the Feature compliance report tables. Outcome Partial - Definition All required tests have been performed and passed Not all the required tests have been performed but none have failed Feature cannot be certified e.g. it is not supported by at least one product, no tests were performed, or some tests were performed but at least one failed The outcome is derived from the verdict assigned to a sub feature which is the result of an analysis of the test case results listed in the Test Report. The verdict assigned to each sub-feature is derived from one or several test case results or test steps result, the TETRA Interoperability requirement tables (TIC-RTs) indicate the link between subfeatures and test cases for the certified set of equipment capabilities (see Test Report). Verdict Passed Incomplete Failed Definition All mandated tests or steps of tests linked to this functionality (as per TIC-RT indication) are compliant with the TIP specification relevant to this feature. Not all Mandated tests (as per TIC-RT indication) have been executed At least one of mandated test or steps of tests linked to this functionality failed to match the TIP specification relevant to this feature. 5/26 v3

6 The verdict associated to the feature gives also indication about the method used to test that feature. The allowed testing Methods are listed in the table below, a complete description of the procedures and constraints associated to each of them can be found in the "TPD TETRA Interoperability Certification Process Description" document. Testing Method Complete Spot Regression Regression on spot Witnessed Description All mandated tests associated to the feature have been executed Only a selection of the mandatory test cases associated to the feature has been executed during the test session. These tests are a subset of the tests performed on an equivalent software which has been "completely" tested against the same functionality on a different equipment, see manufacturer declaration in the associated Test Report Only a selection of the mandatory test cases associated to the feature has been executed during the test session. These tests are a subset of the tests performed on a previous version of the same software which has been "completely" tested in a previous test session against the same functionality, see manufacturer definition in the associated Test Report The regression method has been applied on the verdicts based on the spot testing method The TIP heading lines in the Feature Compliance Report indicate whether each TIP is partially or fully witnessed by the Certification Body. Additionally, for a partially-witnessed TIP, the number of witnessed test cases that passed is shown for each the feature and sub-feature. There may have been some un-witnessed passed tests and they will have been found to be successful based on the log file evaluation. Depending on equipment capabilities declared by the manufacturer, some features or sub features cannot be tested. The following table describes meaning of the used abbreviation: Indication Not supported Definition The SwMI and/or MS do not support the minimum features required to verify these items 6/26 v3

7 ISCTI has made every effort to ensure that every result has been correctly evaluated in accordance with the relevant TIPs, Test Plans and TIC-RTs. ISCTI has no liability for the test results, or towards the manufacturers. The table on the following page lists HW and SW releases of SwMI and Terminal under test in the last four test sessions and the used TIP specifications, Test Plans and TIC- RTs. This Certificate and Certificates from previous test sessions are available on the TETRA + Critical Communications Association web site ( The feature results are shown in the tables below. 7/26 v3

8 Information on equipment under test and document references Test Session Date/Place Motorola Solutions Krakow April 2014 SwMI Type Dimetra IP R8.2 SwMI HW Release SwMI SW Release Terminal Type Terminal HW Release Terminal SW Release SwMI Callout Application simulator SW Realese Dimetra IP R8.2 8,2 MTP3250 PT912OHE MR TIP Specs and TIP Compliance Test Plans Core TTR v6.0.0 IOP v3.0.0 TIC-RT v260 SDS TTR v2.1.1 IOP v2.0.0 TIC-RT v213 DGNA TTR v2.0.0 IOP v2.0.1 TIC-RT v222 8/26 v3

9 Auth PD AL AIE SI ED TKD RUA LIP Callout TTR v3.0.0 IOP v2.0.0 TIC-RT v223 TTR v3.0.0 IOP v3.0.5 TIC-RT v305 TTR v2.0.0 IOP v1.1.0 TIC-RT v122 TTR v3.0.3 IOP v3.0.2 TIC-RT v325 TTR v1.0.0 IOP v1.0.0 TIC-RT v127 TTR v2.0.0 IOP v1.0.0 TIC-RT v146 TTR v1.0.3 IOP v1.0.0 TIC-RT v117 TTR v1.0.1 IOP v1.0.0 TIC-RT v108 TTR v1.0.0 IOP v1.0.0 TIC-RT v105 TTR v1.0.0 IOP v1.0.0 TIC-RT v103 9/26 v3

10 Feature compliance report Test Session Motorola Solutions Krakow April 2014 Core Registration ITSI attach SwMI initiated location updating LA timer based Periodic location updating De-registration Group Management Single group attachment Multiple group attachment MS initiated group detachment SwMI initiated group management Group call Normal group call Late entry Priority Group scanning Call setup modifications Resource Queuing based on Call Priority 1_pass_of_4 1 Spot 0_pass_of_5 1_pass_of_4 1_pass_of_9 Spot 0_pass_of_3 10/26 v3

11 Broadcast Call Limited coverage notification Individual call Simplex individual call Duplex individual call Call setup modifications Resource Queuing based on Call Priority Indication of imminent call disconnection Status messages Individual addressed Status transfer Group addressed Status transfer Pre-emptive Priority Call Pre-emption of Resources Pre-emption of Busy Users Emergency Call Pre-emption of Resources Pre-emption of Busy Users Call setup modifications Call disconnection by non-call owner Cell Re-selection Undeclared Unannounced Announced - with Call Restoration 2_pass_of_7 2_pass_of_16 1_pass_of_7 1_pass_of_8 11/26 v3

12 Announced - without Call Restoration Expedited PSTN interconnect TETRA Originated Call PSTN Originated Call DTMF over-dial Emergency Telephone Calls 1_pass_of_4 MS-ISDN Numbering MS ISDN - Voice Call MS-ISDN Status In Call Signalling Slow Signalling on Traffic Channel (SACCH) Fast Signalling on Traffic Channel (FACCH) Subscriber Class Procedures Cell Selection based on Subscriber Class Subscriber Class Delivery during Location Update Use of Preferred Subscriber Classes Common Secondary Control Channels One C-SCCH per cell Two C-SCCH per cell Three C-SCCH per cell BS Fallback Operation Switch to/from BS Fallback Operation 1_pass_of_5 1_pass_of_4 1_pass_of_7 Spot 0_pass_of_4 2_pass_of_9 12/26 v3

13 Roaming with BS Fallback Operation Services with BS Fallback Operation Energy Economy Mode Energy Economy Mode Operation Transmit Inhibit TXI Activation & De-Activation TXI Activation & De-Activation with TxI Status available to the Dispatcher Receipt of group addressed service during TXI Mixed band operation Mixed band operation, inter-cell Mixed band operation, intra-cell Mixed band operation, Full 1_pass_of_5 6_pass_of_8 3_pass_of_4 3_pass_of_3 Spot 0_pass_of_4 Spot 0_pass_of_4 Spot 0_pass_of_3 Spot 0_pass_of_3 Short Data Service (SDS) SDS Type 1, 2 or 3 SDS Type 1 SDS Type 2 SDS Type 3 SDS-TL Individually Addressed Group Addressed Using MS-ISDN dialling Using UCS2 coding scheme Using 7-bit coding scheme 2_pass_of_8 13/26 v3

14 Using 8-bit Latin 1 coding scheme Using 8-bit Latin 5 coding scheme Using 8-bit Latin 9 coding scheme Store and Forward Individually Addressed Group Addressed Dynamic Group Number Assignment (DGNA) Support for individually addressed DGNA Support for individually addressed DGNA assignment without attachment FAILED Spot 3_pass_of_11 Support for individually addressed DGNA assignment with attachment as selected 2_pass_of_3 group Support for individually addressed DGNA assignment with attachment as scanned FAILED Spot 0_pass_of_3 group Support for individually addressed DGNA assignment with rejected attachment Support for individually addressed assigment for preprogrammed group Support for group addressed DGNA Support for group addressed DGNA assignment FAILED Spot 1_pass_of_5 Spot Incomplete 1_pass_of_6 Incomplete 14/26 v3

15 Management of 'group assignment lifetime' Support for group addressed DGNA deassignment Tolerance of unsupported DGNA functions MS tolerance of unsupported individual addressed DGNA signalling MS tolerance of unsupported group addressed DGNA signalling SwMI Initiated (non-mutual) Authentication Attach with authentication Roaming with authentication SwMI rejects MS during authentication MS rejects SwMI during authentication SwMI Initiated Authentication made Mutual by MS Attach with authentication Roaming with authentication TEI Query TEI Query Operation Spot Incomplete 0_pass_of_2 Authentication Packet Data Context Management Context Activation 2_pass_of_11 15/26 v3

16 1_pass_of_7 User authentication 1_pass_of_4 Single Slot Packet Data 3_pass_of_10 Data Transfer 2_pass_of_7 Cell re-selection Multi Slot Packet Data 1_pass_of_4 Data Transfer 1_pass_of_4 TEDS TEDS with Context Activation TEDS Data Transmission, using LLC Optimisation TEDS Data Transmission, not using LLC Optimisation TEDS Cell Reselection, using LLC Optimisation TEDS Cell Reselection, not using LLC Optimisation Mixed band operation Mixed band operation, inter-cell Mixed band operation, intra-cell Mixed band operation, Full TETRA Ambience Listening (SS-AL) 16/26 v3

17 Ambience Listening SS-AL Call Setup MS initiated SS-AL disconnection No Indication to affected user Interaction with Transmit Inhibit AL can override TxI AL cannot override TxI Security Class 2 Air Interface Encryption Location Updating and AI Signalling Protection TM-SCK provisioning during location updating Communications between parties using encryption Communications between clear and encrypted parties Communications between encrypted parties on a channel designated to operate in clear OTAR of TM-SCK Change of TM-SCK Packet Data with Class 2 Air Interface Encryption Security Class 3 Air Interface Encryption 2_pass_of_5 2_pass_of_5 Air Interface Encryption 5_pass_of_20 2_pass_of_7 Spot 0_pass_of_3 1_pass_of_4 4_pass_of_21 17/26 v3

18 Clear Location Updating and AI Signalling Protection Encrypted Location Updating and AI Signalling Protection DCK Forwarding at MS request DCK Forwarding by SwMI (without MS request) DCK Retrieval CCK provisioning during location updating Communications between parties using encryption Communications between clear and encrypted parties Communications between encrypted parties on a channel designated to operate in clear OTAR of CCK Change of CCK Packet Data with Class 3 Air Interface Encryption Security Class 3G Air Interface Encryption GCK Key Association setting Communications between parties using encryption Communications between clear and encrypted parties Spot 0_pass_of_3 2_pass_of_5 1_pass_of_4 Spot 0_pass_of_3 1_pass_of_4 1_pass_of_9 18/26 v3

19 OTAR of GCK Change of GCK Management of CMG and GSKO OTAR and change of CMG and GSKO Key Status demand SCK Key Status demand GCK Key Status demand GSKO Key Status demand Change of Security Class for Fallback operation Seamless change to Security Class 2 for BS Fallback operation Non-seamless change to Security Class 2 for BS Fallback operation Provisioning of TM-SCK for fallback to Security Class 2 operation Change to Security Class 1 for BS Fallback operation Change of Security Class (other than for Fallback operation) Change between Security Class 3 and Security Class 3G Change between Security Class 2 and Security Class 3 Spot 0_pass_of_3 2_pass_of_5 2_pass_of_5 2_pass_of_4 2_pass_of_12 2_pass_of_10 1_pass_of_5 19/26 v3

20 Change from Security Class 3G to Security Class 2 Key Management for Secure Direct Mode Operation OTAR of DM-SCK Change of DM-SCK MS initiated Service Interaction MS initiated Circuit Mode Call during another Circuit Mode Call MS initiated Circuit Mode Call during Packet Mode Transfer MS initiated Packet Mode Transfer during Circuit Mode Call SwMI initiated Service Interaction SwMI initiated Circuit Mode Call during another Circuit Mode Call SwMI initiated Circuit Mode Call during Packet Mode Transfer SwMI initiated Packet Mode Transfer during Circuit Mode Call Service Interaction 1_pass_of_6 Spot 0_pass_of_4 Call Waiting Call Waiting in Individual Call Call Waiting in Group Call 20/26 v3

21 Enable Disable Enable and temporary disable of an MS Enable and temporary disable of an MS without authentication Enable and temporary disable of an MS with authentication Registration of a temporary disabled MS Rejection of applicable invalid enable/disable requests Removable SIMs do not affect the subscriber or equipment that has been enabled/disabled Disabling of an MS during a call or while on the PDCH Permanent disable of an MS Permanent disable of an MS with authentication Permanently Disabled MS cannot send air interface signalling Delivery of Authentication Data Authentication Key Delivery ITSI Delivery Delivery of SCK SCK Delivery to SCK delivery 2_pass_of_8 Spot 0_pass_of_3 Key Delivery 21/26 v3

22 SCK Delivery to SwMI SCK Delivery to SCK loading Delivery method Plain text on physical media Encrypted text on physical media Electronic transfer RUA Radio User Assignment Radio User Assignment at Location Updating Dispatcher initiated Radio User Assignment Radio User Dis-assignment Location Information Protocol LIP over SDS LIP over Packet Data Time based reporting Distance based reporting - NOT TESTABLE Reporting using Long reports Reporting Enable & Disable 3_pass_of_14 1_pass_of_6 1_pass_of_6 LIP 4_pass_of_12 2_pass_of_5 Spot 0_pass_of_3 1_pass_of_5 22/26 v3

23 Temporary reporting control Trigger modification Immediate Location Reporting Reporting Lifetimes Error Reporting Full Callout Individually Addressed Full Callout with request for Terminal Receipt message and with request for User Receipt message Group Addressed Full Callout without request for Terminal Receipt message and without request for User Receipt message Using current selected group during Full Callout Full Callout with immediate change to Callout Group Full Callout with change to Callout Group on non-rejecting user response Full Callout with rejecting User Receipt message Full Callout with timeout for User Receipt message Callout 4_pass_of_13 N/A N/A 23/26 v3

24 Callout Incident Information messages Group Call to Callout Group End of Full Callout 1_pass_of_4 Simple Callout Individually Addressed Callout with request for Terminal Receipt message and with request for User Receipt message Individually Addressed Callout with request for Terminal Receipt message and without request for User Receipt message Group Addressed Callout without request for Terminal Receipt message and without request for User Receipt message Group Addressed Callout without request for Terminal Receipt message and with request for User Receipt message Simple Callout with rejecting User Receipt message Simple Callout with timeout for User Receipt message Interaction with other services and events FAILED Spot 6_pass_of_27 24/26 v3

25 Interaction with previous Callout Interaction with emergency call Interaction with non-emergency call Interaction with data and status Interaction with local services Manual exit Callout Test and Callout Availability Callout Test Callout Availability Callout Text and Callout Pre- Coded Status Callout Text Concatenated Callout Text Callout Pre-Coded Status Storage of Callout Information Viewing Callout information from previous Callout(s) Deletion of Callout information from previous Callout(s) Spot 0_pass_of_3 3_pass_of_11 FAILED Spot 1 2_pass_of_7 1_pass_of_4 25/26 v3

26 Annex A List of Revisions of the Certificate Date Ver. Modification 8 October First published version 22 October March updating: A SwMI declaration is changed to reflect the inability to support group addressed Full Callout as per the TIP specification consequently has changed the number of "Full Callout" tests on "Feature compliance report" Table. Re-instated the SwMI group addressed Full Callout declaration, to yes as the process only allows declaration changes in case of human errors. This case was not a human error, the fault was in the Callout host application simulator. The following updates have been done: Feature compliance report table outcomes from to N/A for Group Addressed Full Callout without request for Terminal Receipt message and without request for User Receipt message and for Using current selected group during Full Callout. Head of the Procedure Radio Office Manager 26/26 v3