TETRA Interoperability Certificate. Hytera Mobilfunk GmbH, ACCESSNET T IP, SwMI Motorola, MTM5400, Terminal. Bad Münder, January 2013

Transcription

1 TETRA Interoperability Certificate Hytera Mobilfunk GmbH, ACCESSNET-T IP, SwMI Motorola, MTM5400, Terminal Bad Münder, January 2013 Latest SwMI SW Release: PV Latest Terminal SW Release: MR Latest SwMI HW Release: PV Latest Terminal HW Release: MT953C ISCTI (Istituto Superiore delle Comunicazioni e delle Tecnologie dell'informazione) certifies, that the Hytera Mobilfunk GmbH, ACCESSNET T IP, SwMI and the Motorola MTM5400, terminal have been subject to interoperability testing for the certified features listed on second page of this certificate, in accordance with the TETRA Interoperability Profiles, TIP compliance Test Plan and related TETRA interoperability requirement tables. The table lists all the available TETRA interoperability profiles, and summarizes the main functionalities of every profile according to the TETRA interoperability requirement tables. A feature is when it has been successfully tested during the last test session with one of the testing method described in the TETRA process document part 1 (TPD001 01). A breakdown into the feature details is given in the Feature Compliance Overview section of this certificate. This certificate has been issued following a multiple test session between Hytera Mobilfunk GmbH and Motorola on January Detailed test results are listed in the Test Report associated to this Certificate. Details and explanation about the procedure used to provide verdicts are in the TIC process TPD IOP test engineer Radio Office Manager ISCTI V.le America 201, Rome, Italy Ph.: , Fax: e mail: tetra_ctc.iscom@mise.gov.it, Web: Date of issue: 17 June /21

2 features Tetra Association TTR001 01:Core Registration Group Management Group call Individual call Status messages Pre emptive Priority Call Emergency Call Cell Re selection PSTN interconnect MS ISDN Numbering In Call Signalling Subscriber Class Procedures Common Secondary Control Channels BS Fallback Operation Partial Energy Economy Mode - Transmit Inhibit Mixed band operation - Tetra Association TTR001 02:SDS SDS Type 1, 2 or 3 SDS TL Store and Forward - 2/21

3 Tetra Association TTR001 03:DGNA Support for individually addressed DGNA Support for group addressed DGNA - Tolerance of unsupported DGNA functions - Tetra Association TTR001 04:Auth SwMI Initiated (non mutual) Authentication SwMI Initiated Authentication made Mutual by MS TEI Query - Tetra Association TTR001 09:AL Ambience Listening Interaction with Transmit Inhibit - Tetra Association TTR001 10:E2EE E2EE Voice Call Tetra Association TTR001 11:AIE Security Class 2 Air Interface Encryption Security Class 3 Air Interface Encryption Security Class 3G Air Interface Encryption - Change of CMG and GSKO - Key Status demand - Change of Security Class for Fallback operation - Change of Security Class (other than for Fallback operation) - Key Management for Secure Direct Mode Operation - Tetra Association TTR001 12:SI MS initiated Service Interaction SwMI initiated Service Interaction Call Waiting - Tetra Association TTR001 13:ED Enable and temporary disable of an MS 3/21

4 Permanent disable of an MS Tetra Association TTR001 14:TKD Delivery of Authentication Data Delivery of SCK Delivery method Tetra Association TTR001 19:LIP Location Information Protocol Tetra Association TTR001 20:CF Call Forwarding Unconditional Call Forwarding Conditional Call Forwarding Information Displayed - 4/21

5 Feature Compliance Overview The first pages of this certificate provide an indication about the main interoperable TETRA features for each TIP specification (as described in the TIC-RT). The main interoperable TETRA features result depend on a set of sub-feature, the outcomes associated to each sub-feature are directly derived from the analysis of the performed test cases. The results associated to each feature and sub-feature are shown in the "Feature compliance report" table below. The main features are indicated with grey background and the associated sub-features (or second level features) have light blue background. The outcome assigned to a sub-feature as shown on page 2, is derived by the Feature compliance report tables. Outcome Partial Definition All required tests have been performed and passed Not all the required tests have been performed but none have failed Feature cannot be certified e.g. it is not supported by at least one product, no tests were performed, or some tests were performed but at least one failed The outcome is derived from the verdict assigned to a sub feature which is the result of an analysis of the test case results listed in the Test Report. The verdict assigned to each sub-feature is derived from one or several test case results or test steps result, the TETRA Interoperability requirement tables (TIC-RTs) indicate the link between sub-features and test cases for the certified set of equipment capabilities (see Test Report). Verdict Passed Incomplete Failed Definition All mandated tests or steps of tests linked to this functionality (as per TIC RT indication) are compliant with the TIP specification relevant to this feature. Not all Mandated tests (as per TIC RT indication) have been executed At least one of mandated test or steps of tests linked to this functionality failed to match the TIP specification relevant to this feature. 5/21

6 The verdict associated to the feature gives also indication about the method used to test that feature. The allowed testing Methods are listed in the table below, a complete description of the procedures and constraints associated to each of them can be found in the "TPD TETRA Interoperability Certification Process Description" document. Testing Method Complete Spot Regression Regression on spot Witnessed Description All mandated tests associated to the feature have been executed Only a selection of the mandatory test cases associated to the feature has been executed during the test session. These tests are a subset of the tests performed on an equivalent software which has been "completely" tested against the same functionality on a different equipment, see manufacturer declaration in the associated Test Report Only a selection of the mandatory test cases associated to the feature has been executed during the test session. These tests are a subset of the tests performed on a previous version of the same software which has been "completely" tested in a previous test session against the same functionality, see manufacturer definition in the associated Test Report The regression method has been applied on the verdicts based on the spot testing method The TIP heading lines in the Feature Compliance Report indicate whether each TIP is partially or fully witnessed by the Certification Body. Additionally, for a partially witnessed TIP, the number of witnessed test cases that passed is shown for each the feature and sub feature. There may have been some un witnessed passed tests and they will have been found to be successful based on the log file evaluation. Depending on equipment capabilities declared by the manufacturer, some features or sub features cannot be tested. The following table describes meaning of the used abbreviation: Indication Not supported Definition The SwMI and/or MS do not support the minimum features required to verify these items ISCTI has made every effort to ensure that every result has been correctly evaluated in accordance 6/21

7 with the relevant TIPs, Test Plans and TIC-RTs. ISCTI has no liability for the test results, or towards the manufacturers. The table on the following page lists HW and SW releases of SwMI and Terminal under test in the last four test sessions and the used TIP specifications, Test Plans and TIC-RTs. This Certificate and Certificates from previous test sessions are available on the TETRA + Critical Communications Association web site ( The feature results are shown in the tables below. Information on equipment under test and document references Test Session Date/Place SwMI Type Hytera Mobilfunk GmbH, Bad Münder, January 2013 ACCESSNET T IP SwMI HW PV Release SwMI SW PV Release Terminal Type MTM5400 Terminal HW MT953C Release Terminal SW MR Release TIP Specs and TIP Compliance Test Plans Core TTR v6.0.0 IOP v3.0.0 TIC RT v /21

8 SDS TTR v2.1.1 IOP v2.0.0 TIC RT v2.1.2 DGNA TTR v2.0.0 IOP v2.0.1 TIC RT v2.2.1 Auth TTR v3.0.0 IOP v2.0.0 TIC RT v2.2.3 AL TTR v2.0.0 IOP v1.1.0 TIC RT v1.2.2 E2EE TTR v2.0.0 IOP v1.1.4 TIC RT v1.2.2 AIE TTR v3.0.3 IOP v3.0.2 TIC RT v3.2.1 SI TTR v1.0.0 IOP v1.0.0 TIC RT v1.2.7 ED TTR v2.0.0 IOP v1.0.0 TIC RT v1.4.6 TKD TTR v1.0.3 IOP v1.0.0 TIC RT v LIP TTR v1.0.0 IOP v1.0.0 TIC RT v1.0.5 CF TTR v1.0.1 IOP v1.0.0 TIC RT v /21

9 Feature compliance report Test Session Registration ITSI attach SwMI initiated location updating LA timer based Periodic location updating De registration Group Management Single group attachment Multiple group attachment MS initiated group detachment SwMI initiated group management Group call Normal group call Late entry Priority Group scanning Call setup modifications Resource Queuing based on Call Priority Broadcast Call Hytera Mobilfunk GmbH Bad Münder January 2013 Core 13_pass_of_13 6_pass_of_6 5_pass_of_5 10_pass_of_10 9/21

10 Limited coverage notification Individual call Simplex individual call Duplex individual call Call setup modifications Resource Queuing based on Call Priority Indication of imminent call disconnection Status messages Individual addressed Status transfer Group addressed Status transfer Pre emptive Priority Call Pre emption of Resources Pre emption of Busy Users Emergency Call Pre emption of Resources Pre emption of Busy Users Call setup modifications Call disconnection by non call owner Cell Re selection Undeclared Unannounced Announced with Call Restoration Announced without Call Restoration Expedited 11 6_pass_of_6 16_pass_of_16 7_pass_of_7 8_pass_of_8 10/21

11 PSTN interconnect TETRA Originated Call PSTN Originated Call DTMF over dial Emergency Telephone Calls MS ISDN Numbering MS ISDN Voice Call MS ISDN Status In Call Signalling Slow Signalling on Traffic Channel (SACCH) Fast Signalling on Traffic Channel (FACCH) Subscriber Class Procedures Cell Selection based on Subscriber Class Subscriber Class Delivery during Location Update Use of Preferred Subscriber Classes Common Secondary Control Channels One C SCCH per cell Two C SCCH per cell Three C SCCH per cell BS Fallback Operation Switch to/from BS Fallback Operation Roaming with BS Fallback Operation Services with BS Fallback Operation 6_pass_of_6 5_pass_of_5 Incomplete 4_pass_of_9 Incomplete 1_pass_of_3 Incomplete 1_pass_of_3 Incomplete 2_pass_of_3 6_pass_of_6 12_pass_of_12 8_pass_of_8 Energy Economy Mode 11/21

12 Energy Economy Mode Operation Transmit Inhibit TXI Activation & De Activation without Status message TXI Activation & De Activation with Status message Receipt of group addressed service during TXI 5_pass_of_5 Mixed band operation Mixed band operation, inter cell Mixed band operation, intra cell Mixed band operation, Full Short Data Service (SDS) SDS Type 1, 2 or 3 SDS Type 1 SDS Type 2 SDS Type 3 SDS TL Individually Addressed Group Addressed Using MS ISDN dialling Using UCS2 coding scheme Using 7 bit coding scheme 7_pass_of_7 Store and Forward Individually Addressed Group Addressed 12/21

13 Dynamic Group Number Assignment (DGNA) Support for individually addressed DGNA Support for individually addressed DGNA assignment without attachment Support for individually addressed DGNA assignment with attachment as selected group Support for individually addressed DGNA assignment with attachment as scanned group Support for individually addressed DGNA assignment with rejected attachment Support for individually addressed assigment for pre programmed group Support for group addressed DGNA Support for group addressed DGNA assignment Management of 'group assignment lifetime' Support for group addressed DGNA deassignment Tolerance of unsupported DGNA functions MS tolerance of unsupported individual addressed DGNA signalling MS tolerance of unsupported group addressed DGNA signalling 12_pass_of_12 5_pass_of_5 13/21

14 Authentication SwMI Initiated (non mutual) Authentication Attach with authentication Roaming with authentication SwMI rejects MS during authentication MS rejects SwMI during authentication SwMI Initiated Authentication made Mutual by MS Attach with authentication Roaming with authentication TEI Query TEI Query Operation TETRA Ambience Listening (SS AL) Ambience Listening SS AL Call Setup MS initiated SS AL disconnection No Indication to affected user Interaction with Transmit Inhibit AL can override TxI AL cannot override TxI End to End Encryption E2EE Voice Call 6_pass_of_6 14/21

15 Individual (P2P) call Group (P2MP) call Clear Voice Override (CVO): Acceptance Clear Voice Override (CVO): User Initiated Clear Voice Override (CVO): Automatic Security Class 2 Air Interface Encryption Location Updating and AI Signalling Protection TM SCK provisioning during location updating Communications between parties using encryption Communications between clear and encrypted parties Communications between encrypted parties on a channel designated to operate in clear OTAR and Change of TM SCK Packet Data with Class 2 Air Interface Encryption Security Class 3 Air Interface Encryption Location Updating and AI Signalling Protection DCK Forwarding at MS request Air Interface Encryption 10_pass_of_10 10_pass_of_10 DCK Forwarding by SwMI (without MS request) 15/21

16 DCK Retrieval CCK provisioning during location updating Communications between parties using encryption Communications between clear and encrypted parties Communications between encrypted parties on a channel designated to operate in clear OTAR and Change of CCK Packet Data with Class 3 Air Interface Encryption Security Class 3G Air Interface Encryption GCK Key Association setting Communications between parties using encryption Communications between clear and encrypted parties OTAR and Change of GCK Change of CMG and GSKO OTAR and change of CMG and GSKO Key Status demand SCK Key Status demand GCK Key Status demand GSKO Key Status demand Change of Security Class for Fallback operation 16/21

17 Seamless change to Security Class 2 for BS Fallback operation Non seamless change to Security Class 2 for BS Fallback operation Provisioning of TM SCK for fallback to Security Class 2 operation Change to Security Class 1 for BS Fallback operation Change of Security Class (other than for Fallback operation) Change between Security Class 3 and Security Class 3G Change between Security Class 2 and Security Class 3 Change from Security Class 3G to Security Class 2 Key Management for Secure Direct Mode Operation OTAR and change of DM SCK Service Interaction MS initiated Service Interaction MS initiated Circuit Mode Call during another Circuit Mode Call MS initiated Circuit Mode Call during Packet Mode Transfer MS initiated Packet Mode Transfer during Circuit Mode Call SwMI initiated Service Interaction SwMI initiated Circuit Mode Call during another Circuit Mode Call 8_pass_of_8 8_pass_of_8 17/21

18 SwMI initiated Circuit Mode Call during Packet Mode Transfer SwMI initiated Packet Mode Transfer during Circuit Mode Call Call Waiting Call Waiting in Individual Call Call Waiting in Group Call Enable and temporary disable of an MS Enable and temporary disable of an MS without authentication Enable and temporary disable of an MS with authentication Registration of a temporary disabled MS Rejection of applicable invalid enable/disable requests Removable SIMs do not affect the subscriber or equipment that has been enabled/disabled Disabling of an MS during a call or while on the PDCH Permanent disable of an MS Permanent disable of an MS with authentication Permanently Disabled MS cannot send air interface signalling Delivery of Authentication Data Enable Disable 19_pass_of_19 6_pass_of_6 6_pass_of_6 Key Delivery Authentication Key Delivery 18/21

19 ITSI Delivery Delivery of SCK SCK Delivery to SCK delivery SCK Delivery to SwMI SCK Delivery to SCK loading Delivery method Plain text on physical media Encrypted text on physical media Electronic transfer Location Information Protocol LIP over SDS LIP over Packet Data Time based reporting Distance based reporting - NOT TESTABLE Reporting using Long reports Reporting Enable & Disable Temporary reporting control Trigger modification Immediate Location Reporting Reporting Lifetimes LIP 11 6_pass_of_6 19/21

20 Error Reporting Call Forwarding Unconditional Call Forwarding Unconditional Individual Call Call Forwarding Unconditional SDS Call Forwarding Unconditional Status Call Forwarding Conditional Call Forwarding Conditional Individual Call Call Forwarding Information Displayed Call Forwarding Information Displayed Call Forwarding 20/21

21 Annex A List of Revisions of the Certificate Date Ver. Modification 23 May First published version 29 May updating: - corrected the number of Test Cases results of group call subfeatures in Core feature compliance report. 17 June updating: - the number of Test Cases results of Location Updating and AI Signaling Protection subfeatures in AIE feature compliance report has been corrected since the Test Case was deselected. 21/21