TETRA Interoperability Certificate

Transcription

1 TETRA Interoperability Certificate, Dimetra IP Compact Rel 3, SwMI, TCR1000, Terminal, Latest SwMI SW Release: 3.0 Latest Terminal SW Release: MR9.6.1 Latest SwMI HW Release: Dimetra IP Compact Latest Terminal HW Release: PT919S (Istituto Superiore delle Comunicazioni e delle Tecnologie dell'informazione) certifies, that the, Dimetra IP Compact Rel 3, SwMI and the, TCR1000, terminal have been subject to interoperability testing for the certified features listed on second page of this certificate, in accordance with the TETRA Interoperability Profiles, TIP compliance Test Plan and related TETRA interoperability requirement tables. The table lists all the available TETRA interoperability profiles, and summarizes the main functionalities of every profile according to the TETRA interoperability requirement tables. A feature is when it has been successfully tested during the last test session with one of the testing method described in the TETRA process document part 1 (TPD001). A breakdown into the feature details is given in the Feature Compliance Overview section of this certificate. Detailed test results and explanation about the procedure used to provide verdicts are listed in the Test Report associated to this Certificate. This issue updates the previous version of the certificate according to the List of Revisions on Annex B. - V.le America 201, Rome, Italy Ph.: , Fax: tetra_ctc.iscom@sviluppoeconomico.gov.it, Web: 1/17 Date of issue: 6 July tetra_ctc.iscom@isviluppoeconomico.gov.it

2 features at this Tetra Association, TTR001-01: Core Registration Group Management Group call Individual call - Status messages - Pre-emptive Priority Call - Emergency Call Cell Re-selection PSTN interconnect - MS-ISDN Numbering - In Call Signalling - Subscriber Class Procedures Common Secondary Control Channels - BS Fallback Operation Energy Economy Mode - Transmit Inhibit Tetra Association, TTR : DGNA Support for individually addressed DGNA Support for group addressed DGNA - Tolerance of unsupported DGNA functions - Tetra Association, TTR : Auth SwMI Initiated (non-mutual) Authentication SwMI Initiated Authentication made Mutual by MS TEI Query - Tetra Association, TTR : AL Ambience Listening Tetra Association, TTR : E2EE E2EE Voice Call Tetra Association, TTR : AIE Security Class 2 Air Interface Encryption Partial Security Class 3 Air Interface Encryption Security Class 3G Air Interface Encryption Partial Change of CMG and GSKO Key Status demand Change of Security Class for Fallback operation Change of Security Class (other than for Fallback operation) Key Management for Secure Direct Mode Operation Tetra Association, TTR : E/D Enable and temporary disable of an MS Permanent disable of an MS with authentication Tetra Association, TTR : TKD Delivery of Authentication Data Delivery of SCK Delivery method 2/17 - tetra_ctc.iscom@isviluppoeconomico.gov.it

3 Feature Compliance Overview The first pages of this certificate provide an indication about the main interoperable TETRA features for each TIP specification (as described in the TIC-RT). The main interoperable TETRA features results depend on a set of sub-feature, the verdicts associated to each sub-feature are directly derived from the analysis of the performed test cases. The results associated to each feature and sub-feature are shown in the Feature compliance report table below. The main features are indicated with grey background and the associated sub-features (or second level features) have white background. The verdict assigned to a sub-feature as showed on Page 2, is derived by the Feature compliance report tables. Partial Verdict Definition All required tests have been performed and passed. Not all the required test cases have been performed, but none have failed. - Feature cannot be certified e.g. it is not supported by at least one product, no tests were performed, or some tests were performed but at least one failed. The verdict assigned to a sub-feature is the result of the analysis of the test case results listed in the Test Report. The verdict assigned to each sub-feature is derived from one or several test case results or test steps result, the TETRA Interoperability requirement tables (TIC-RTs) indicate the link between sub-features and test cases for the certified set of equipment capabilities (see Test Report). Verdict Passed Time_limited Failed No_Equipment Definition All mandated tests or steps of tests linked to this functionality (as per TIC-RT indication) are compliant with the TIP specification relevant to this feature. Not all Mandated tests (as per TIC-RT indication) have been executed (ran out of time) At least one of the required test cases has failed. At least one of the required test cases has not been executed due to unavailability of a needed equipment. The verdict associated to the feature gives also indication about the method used to test that feature. The allowed testing Methods are listed in the table below, a complete description of the procedures and constraints associated to each of them can be found in the TPD001 TETRA Interoperability Certification Process Description document. Testing Method Complete on spot X_pass_of_Y Description All mandated tests associated to the feature have been executed. Only a selection of the mandatory test cases associated to the feature has been executed during the test session. These tests are a subset of the tests performed on an equivalent software which has been completely tested against the same functionality on a different equipment, see manufacturer declaration in annex A. Only a selection of the mandatory test cases associated to the feature has been executed during the test session. These tests are a subset of the tests performed on a previous version of the same software which has been completely tested in a previous test session against the same functionality on a different equipment, see manufacturer declaration in annex A. The spot method has been applied on the verdicts based on the regression testing method. The method has been applied on the verdicts based on the spot testing method. Y test cases were required and X were passed. 3/17 - tetra_ctc.iscom@isviluppoeconomico.gov.it

4 Depending on equipment capabilities declared by the manufacturer, some features or sub-feature cannot be tested. The following table describes meaning of the used abbreviation: Indication Definition The SwMI and/or MS do not support the minimum features required to verify these items has made every effort to ensure that every result have been correctly evaluated in accordance with the relevant TIPs, Test Plans and TIC-RTs. has no liability for the test results, or towards the manufacturers. The table on the following page lists HW and SW releases of SwMI and Terminal under test in the last four test sessions and the used TIP specifications, Test Plans, and TIC-RTs. This Certificate and Certificates from previous test sessions are available on the TETRA Association web site ( The feature results are shown in the tables below. 4/17 - tetra_ctc.iscom@isviluppoeconomico.gov.it

5 Information on equipment under test and document references, Date/Place, SwMI Type Dimetra IP Compact Rel 3 SwMI HW Release SwMI SW Release 3.0 Terminal Type Terminal HW release Terminal SW release TIP Specs and TIP Compliance Test Plans Core DGNA Auth AL E2EE AIE ED TKD Dimetra IP Compact TCR1000 PT919S MR9.6.1 TTR v500 IOP v260 TIC-RT v235 TTR v200 IOP v201 TIC-RT v212 TTR v300 IOP v200 TIC-RT v216 TTR v200 IOP v110 TIC-RT v113 TTR v200 IOP v110 TIC-RT v112 TTR v300 IOP v300 TIC-RT v3014 TTR v200 IOP v100 TIC-RT v136 TTR v100 IOP v200 TIC-RT v110 5/17 - tetra_ctc.iscom@isviluppoeconomico.gov.it

6 Feature compliance report Registration ITSI attach SwMI initiated location updating LA timer based Periodic location updating De-registration Group Management Single group attachment Multiple group attachment MS initiated group detachment SwMI initiated group management Group call Normal group call Late entry Priority Group scanning Call setup modifications Resource Queuing based on Call Priority TTR Core 0_pass_of_5 6/17 - tetra_ctc.iscom@isviluppoeconomico.gov.it

7 Individual call Simplex individual call Duplex individual call Call setup modifications TETRA Resource Queuing based on Call Priority Indication of imminent call disconnection Status messages Individual addressed Status transfer Group addressed Status transfer Pre-emptive Priority Call Pre-emption of Resources Pre-emption of Busy Users Emergency Call Pre-emption of Resources Pre-emption of Busy Users Call setup modifications Cell Re-selection Undeclared Unannounced Announced - with Call Restoration Announced - without Call Restoration PSTN interconnect TETRA Originated Call PSTN Originated Call DTMF over-dial 1_pass_of_1 0_pass_of_6 7/17 - tetra_ctc.iscom@isviluppoeconomico.gov.it

8 Emergency Telephone Calls MS-ISDN Numbering MS ISDN - Voice Call MS-ISDN Status In Call Signalling Slow Signalling on Traffic Channel (SACCH) Fast Signalling on Traffic Channel (FACCH) Subscriber Class Procedures Cell Selection based on Subscriber Class Subscriber Class Delivery during Location Update Use of Preferred Subscriber Classes Common Secondary Control Channels One C-SCCH per cell Two C-SCCH per cell Three C-SCCH per cell BS Fallback Operation Switch to/from BS Fallback Operation Roaming with BS Fallback Operation Services with BS Fallback Operation Energy Economy Mode Energy Economy Mode Operation Transmit Inhibit TXI Activation & De-Activation without Status message 0_pass_of_4 1 0_pass_of_6 0_pass_of_5 8/17 - tetra_ctc.iscom@isviluppoeconomico.gov.it

9 TXI Activation & De-Activation with Status message Receipt of group addressed service during TXI 0_pass_of_4 TTR Dynamic Group Number Assignment Support for individually addressed DGNA Support for individually addressed DGNA assignment without attachment Support for individually addressed DGNA assignment with attachment as selected group Support for individually addressed DGNA assignment with attachment as scanned group Support for individually addressed DGNA assignment with rejected attachment Support for individually addressed assigment for pre-programmed group Support for group addressed DGNA Support for group addressed DGNA assignment Management of 'group assignment lifetime' Support for group addressed DGNA deassignment Tolerance of unsupported DGNA functions MS tolerance of unsupported individual addressed DGNA signalling MS tolerance of unsupported group addressed DGNA signalling 0_pass_of_5 0_pass_of_4 9/17 - tetra_ctc.iscom@isviluppoeconomico.gov.it

10 SwMI Initiated (non-mutual) Authentication Attach with authentication Roaming with authentication SwMI rejects MS during authentication MS rejects SwMI during authentication SwMI Initiated Authentication made Mutual by MS Attach with authentication Roaming with authentication TEI Query TEI Query Operation Ambience Listening SS-AL Call Setup MS initiated SS-AL disconnection No Indication to affected user E2EE Voice Call Individual (P2P) call Group (P2MP) call TTR Authentication TTR Ambience Listening TTR End to End Encryption 10/17 - tetra_ctc.iscom@isviluppoeconomico.gov.it

11 Clear Voice Override (CVO) Security Class 2 Air Interface Encryption Location Updating and AI Signalling Protection TM-SCK provisioning during location updating Communications between parties using encryption Communications between clear and encrypted parties Communications between encrypted parties on a channel designated to operate in clear OTAR and Change of TM-SCK Security Class 3 Air Interface Encryption Location Updating and AI Signalling Protection DCK Forwarding at MS request DCK Forwarding by SwMI (without MS request) DCK Retrieval CCK provisioning during location updating Communications between parties using encryption TTR Air Interface Encryption Time_Limited 4 Time_Limited 0_pass_of_8 0_pass_of_4 5 0_pass_of_9 0_pass_of_4 0_pass_of_4 11/17 - tetra_ctc.iscom@isviluppoeconomico.gov.it

12 Communications between clear and encrypted parties Communications between encrypted parties on a channel designated to operate in clear OTAR and Change of CCK Security Class 3G Air Interface Encryption GCK Key Association setting Communications between parties using encryption Communications between clear and encrypted parties OTAR and Change of GCK Change of CMG and GSKO OTAR and change of CMG and GSKO Key Status demand SCK Key Status demand GCK Key Status demand GSKO Key Status demand 0_pass_of_4 Time_Limited 0_pass_of_9 Time_Limited 0_pass_of_5 0_pass_of_5 0_pass_of_4 12/17 - tetra_ctc.iscom@isviluppoeconomico.gov.it

13 Change of Security Class for Fallback operation Seamless change to Security Class 2 for BS Fallback operation Non-seamless change to Security Class 2 for BS Fallback operation Provisioning of TM-SCK for fallback to Security Class 2 operation Change to Security Class 1 for BS Fallback operation Change of Security Class (other than for Fallback operation) Change between Security Class 3 and Security Class 3G Change between Security Class 2 and Security Class 3 Change from Security Class 3G to Security Class 2 Key Management for Secure Direct Mode Operation OTAR and change of DM-SCK Enable and temporary disable of an MS Enable and temporary disable of an MS without authentication Enable and temporary disable of an MS with authentication Registration of a temporary disabled MS Rejection of applicable invalid enable/disable requests 2 0 0_pass_of_5 TTR Enable / Disable 0_pass_of_7 13/17 - tetra_ctc.iscom@isviluppoeconomico.gov.it

14 Removable SIMs do not affect the subscriber or equipment that has been enabled/disabled Disabling of an MS during a call or while on the PDCH Permanent disable of an MS Permanent disable of an MS with authentication Permanently Disabled MS cannot send air interface signalling Delivery of Authentication Data Authentication Key Delivery ITSI Delivery Delivery of SCK SCK Delivery to SCK delivery SCK Delivery to SwMI SCK Delivery to SCK loading Delivery method Plain text on physical media Encrypted text on physical media Electronic transfer TTR TKD 14/17 - tetra_ctc.iscom@isviluppoeconomico.gov.it

15 ANNEX A: Declarations ( and ) 15/17 - tetra_ctc.iscom@isviluppoeconomico.gov.it

16 16/17 - tetra_ctc.iscom@isviluppoeconomico.gov.it

17 ANNEX B: TETRA List of Revisions of the Certificate Date Ver. Modification 29 May First published version. 06 July AIE Key Status demand was updated in page /17 - tetra_ctc.iscom@isviluppoeconomico.gov.it