TETRA Interoperability Certificate

Transcription

1 TETRA Interoperability Certificate, Dimetra IP R6.1SSR, SwMI Sepura, SRH3800, Terminal, Latest Certified SwMI SW Release: R6.1SSR Latest Certified Terminal SW Release: Latest Certified SwMI HW Release: Dimetra IP Latest Certified Terminal HW Release: PSHTW201T400G00 (Istituto Superiore delle Comunicazioni e delle Tecnologie dell'informazione) certifies, that the, Dimetra IP R6.1SSR, SwMI and the Sepura, SRH3800, terminal have been subject to interoperability testing for the certified features listed on second page of this certificate, in accordance with the TETRA Interoperability Profiles, TIP compliance Test Plan and related TETRA interoperability requirement tables. The table lists all the available TETRA interoperability profiles, and summarizes the main functionalities of every profile according to the TETRA interoperability requirement tables. A feature is Certified when it has been successfully tested during the last test session with one of the testing method described in the TETRA process document part 1 (TPD001). A breakdown into the feature details is given in the Feature Compliance Overview section of this certificate. Detailed test results and explanation about the procedure used to provide verdicts are listed in the Test Report associated to this Certificate. - V.le America 201, Rome, Italy Ph.: , Fax: tetra_ctc.iscom@comunicazioni.it, Web: Date of issue: 5 December 2008 :,,, Dimetra IP R6.1SSR, SwMI - Sepura, SRH3800, Terminal 1/16 - tetra_ctc.iscom@icomunicazioni.it

2 Certified features TETRA Tetra Association, TTR001-01: Core Registration Certified Group Management Certified Group call Certified Individual call Certified Status messages Certified Pre-emptive Priority Call Certified Emergency Call Certified Cell Re-selection Certified PSTN interconnect Certified MS-ISDN Numbering - In Call Signalling Certified Subscriber Class Procedures Certified Common Secondary Control Channels - BS Fallback Operation Partial Energy Economy Mode - Transmit Inhibit Certified :,,, Dimetra IP R6.1SSR, SwMI - Sepura, SRH3800, Terminal 2/16 - tetra_ctc.iscom@icomunicazioni.it

3 Feature Compliance Overview The first pages of this certificate provide an indication about the main interoperable TETRA features for each TIP specification (as described in the TIC-RT). The main interoperable TETRA features results depend on a set of sub-feature, the verdicts associated to each sub-feature are directly derived from the analysis of the performed test cases. The results associated to each feature and sub-feature are shown in the Feature compliance report table below. The main features are indicated with grey background and the associated sub-features (or second level features) have white background. The verdict assigned to a sub-feature as showed on Page 2, is derived by the Feature compliance report tables. Certified Partial Verdict Definition All required tests have been performed and passed. Not all the required test cases have been performed, but none have failed. - Feature cannot be certified e.g. it is not supported by at least one product, no tests were performed, or some tests were performed but at least one failed. The verdict assigned to a sub-feature is the result of the analysis of the test case results listed in the Test Report. The verdict assigned to each sub-feature is derived from one or several test case results or test steps result, the TETRA Interoperability requirement tables (TIC-RTs) indicate the link between sub-features and test cases for the certified set of equipment capabilities (see Test Report). Verdict Passed Time_limited Failed No_Equipment Definition All mandated tests or steps of tests linked to this functionality (as per TIC-RT indication) are compliant with the TIP specification relevant to this feature. Not all Mandated tests (as per TIC-RT indication) have been executed (ran out of time) At least one of the required test cases has failed. At least one of the required test cases has not been executed due to unavailability of a needed equipment. The verdict associated to the feature gives also indication about the method used to test that feature. The allowed testing Methods are listed in the table below, a complete description of the procedures and constraints associated to each of them can be found in the TPD001 TETRA Interoperability Certification Process Description document. Testing Method Spot on spot X_pass_of_Y Description All mandated tests associated to the feature have been executed. Only a selection of the mandatory test cases associated to the feature has been executed during the test session. These tests are a subset of the tests performed on an equivalent software which has been completely tested against the same functionality on a different equipment, see manufacturer declaration in annex A. Only a selection of the mandatory the test cases associated to the feature is executed during the test session. These tests are a subset of the tests performed on a previous version of the same software which has been complete tested in a previous test session against the same functionality, see manufacturer declaration in annex A. The regression method has been applied on the verdicts based on the spot testing method. Y test cases were required and X were passed. Depending on equipment capabilities declared by the manufacturer, some features or sub-feature cannot be tested. The following table describes meaning of the used abbreviation: :,,, Dimetra IP R6.1SSR, SwMI - Sepura, SRH3800, Terminal 3/16 - tetra_ctc.iscom@icomunicazioni.it

4 Indication TETRA Definition MS-nr MS-nr The SwMI does not support the minimum features required to verify these items The MS does not support the minimum features required to verify these items The SwMI and MS do not support the minimum features required to verify these items has made every effort to ensure that every result have been correctly evaluated in accordance with the relevant TIPs, Test Plans and TIC-RTs. has no liability for the test results, or towards the manufacturers. The table on the following page lists HW and SW releases of SwMI and Terminal under test in the last four test sessions and the used TIP specifications, Test Plans, and TIC-RTs. This Certificate and Certificates from previous test sessions are available on the TETRA Association web site ( The feature results are shown in the tables below. :,,, Dimetra IP R6.1SSR, SwMI - Sepura, SRH3800, Terminal 4/16 - tetra_ctc.iscom@icomunicazioni.it

5 Information on equipment under test and document references Date/Place,,,,,,,, March 2006 SwMI Type Dimetra IP R6.1SSR Dimetra IP R6.1SSR Dimetra IP R6.0SER Dimetra IP R5.2SER SwMI HW Release Dimetra IP Dimetra IP Dimetra IP Dimetra IP SwMI SW Release R6.1SSR R6.1SSR R6.0SER R5.2SER Terminal Type SRH3800 SRH3800 SRH3800 SRH3800 Terminal HW release PSHTW201T400G00 PSHTW201T400G00 PS9TL201T400G00 PS9TL201T400G00 Terminal SW release TIP Specs and TIP Compliance Test Plans Core TTR v500 TTR v500 IOP v260 TIC-RT v233 IOP v260 TIC-RT v231 SDS Not tested TTR v201 TTR v201 IOP v200 TIC-RT v202 IOP v200 TIC-RT v201 DGNA Not tested TTR v200 IOP v201 TIC-RT v211 Auth Not tested TTR v300 IOP v200 TIC-RT v213 PD Not tested TTR v200 TTR v200 IOP v200 TIC-RT v223 IOP v200 TIC-RT v220 AL Not tested TTR v200 TTR v200 Not tested IOP v110 TIC-RT v113 IOP v110 TIC-RT v111 E2EE Not tested TTR v200 Not tested IOP v110 TIC-RT v112 AIE Not tested TTR v200 TTR v200 IOP v200 TIC-RT v222 IOP v200 TIC-RT v220 SI Not tested TTR v200 Not tested IOP v100 TIC-RT v135 ED Not tested TTR v500 IOP v260 TIC-RT v231 Not tested :,,, Dimetra IP R6.1SSR, SwMI - Sepura, SRH3800, Terminal 5/16 - tetra_ctc.iscom@icomunicazioni.it

6 Feature compliance report TTR Core Registration 0_pass_of_3 ITSI attach SwMI initiated location updating LA timer based Periodic location updating De-registration Group Management 0_pass_of_5 5_pass_of_5 Single group attachment 0_pass_of_2 Multiple group attachment 0_pass_of_3 MS initiated group detachment MS-nr MS-nr SwMI initiated group management Group call 0_pass_of_8 8_pass_of_8 Normal group call 0_pass_of_3 Late entry Priority Group scanning 0_pass_of_3 :,,, Dimetra IP R6.1SSR, SwMI - Sepura, SRH3800, Terminal 6/16 - tetra_ctc.iscom@icomunicazioni.it

7 Call setup modifications TETRA Resource Queuing based on Call Priority Individual call Simplex individual call Duplex individual call Call setup modifications Resource Queuing based on Call Priority Indication of imminent call disconnection Status messages Individual addressed Status transfer Group addressed Status transfer Pre-emptive Priority Call Pre-emption of Resources Pre-emption of Busy Users Emergency Call Pre-emption of Resources 1_pass_of_7 0_pass_of_3 0_pass_of_2 MS-nr 1_pass_of_2 MS-nr 1_pass_of_2 7_pass_of_7 MS-nr MS-nr :,,, Dimetra IP R6.1SSR, SwMI - Sepura, SRH3800, Terminal 7/16 - tetra_ctc.iscom@icomunicazioni.it

8 Pre-emption of Busy Users Call setup modifications Cell Re-selection Undeclared Unannounced Announced - with Call Restoration Announced - without Call Restoration PSTN interconnect TETRA Originated Call PSTN Originated Call DTMF over-dial Emergency Telephone Calls MS-ISDN Numbering MS ISDN - Voice Call MS-ISDN Status In Call Signalling Slow Signalling on Traffic Channel (SACCH) MS-nr 6_pass_of_15 0_pass_of_3 6_pass_of_11 MS-nr 0_pass_of_4 0_pass_of_2 1_pass_of_5 1_pass_of_4 MS-nr 15_pass_of_15 11 MS-nr Not applicable 5_pass_of_5 :,,, Dimetra IP R6.1SSR, SwMI - Sepura, SRH3800, Terminal 8/16 - tetra_ctc.iscom@icomunicazioni.it

9 Fast Signalling on Traffic Channel (FACCH) Subscriber Class Procedures Cell Selection based on Subscriber Class Subscriber Class Delivery during Location Update Use of Preferred Subscriber Classes Common Secondary Control Channels One C-SCCH per cell Two C-SCCH per cell Three C-SCCH per cell BS Fallback Operation Switch to/from BS Fallback Operation Roaming with BS Fallback Operation Services with BS Fallback Operation Energy Economy Mode Energy Economy Mode Operation Transmit Inhibit TXI Activation & De-Activation without Status message 2_pass_of_3 MS-nr 4_pass_of_12 0_pass_of_2 2_pass_of_6 2_pass_of_4 MS-nr 2_pass_of_7 MS-nr 8_pass_of_8 MS-nr 10 :,,, Dimetra IP R6.1SSR, SwMI - Sepura, SRH3800, Terminal 9/16 - tetra_ctc.iscom@icomunicazioni.it

10 TXI Activation & De-Activation with Status message Receipt of group addressed service during TXI 0_pass_of_4 1_pass_of_2 :,,, Dimetra IP R6.1SSR, SwMI - Sepura, SRH3800, Terminal 10/16 - tetra_ctc.iscom@icomunicazioni.it

11 SDS Type 1, 2 or 3 SDS Type 1 SDS Type 2 SDS Type 3 SDS-TL Individually Addressed Group Addressed Using MS-ISDN dialling TETRA Using UCS2 coding scheme Support for individually addressed DGNA Support for individually addressed DGNA assignment without attachment Support for individually addressed DGNA assignment with attachment as selected group Support for individually addressed DGNA assignment with attachment as scanned group Support for individually addressed DGNA assignment with rejected attachment Support for individually addressed assigment for pre-programmed group Support for group addressed DGNA Support for group addressed DGNA assignment TTR Short Data Service MS-nr MS-nr MS-nr TTR Dynamic Group Number Assignment 6_pass_of_6 MS-nr MS-nr 3_pass_of_6 2_pass_of_3 t :,,, Dimetra IP R6.1SSR, SwMI - Sepura, SRH3800, Terminal 11/16 - tetra_ctc.iscom@icomunicazioni.it

12 Management of 'group assignment lifetime' Support for group addressed DGNA deassignment Tolerance of unsupported DGNA functions MS tolerance of unsupported individual addressed DGNA signalling MS tolerance of unsupported group addressed DGNA signalling SwMI Initiated (non-mutual) Authentication Attach with authentication Roaming with authentication SwMI rejects MS during authentication MS rejects SwMI during authentication SwMI Initiated Authentication made Mutual by MS Attach with authentication Roaming with authentication TEI Query TEI Query Operation Context Management TTR Authentication TTR Packet Data 0_pass_of_2 MS-nr MS-nr MS-nr No_Equipment 11 :,,, Dimetra IP R6.1SSR, SwMI - Sepura, SRH3800, Terminal 12/16 - tetra_ctc.iscom@icomunicazioni.it

13 Context Activation User authentication TETRA Single Slot Packet Data Data Transfer Cell re-selection Multi Slot Packet Data Data Transfer Ambience Listening SS-AL Call Setup MS initiated SS-AL disconnection No Indication to affected user E2EE Voice Call Individual (P2P) call Group (P2MP) call Clear Voice Override (CVO) TTR Ambience Listening TTR End to End Encryption No_Equipment 6_pass_of_7 4_pass_of_9 4_pass_of_6 0_pass_of_3 0_pass_of_4 0_pass_of_4 5_pass_of_5 5_pass_of_5 6_pass_of_6 MS-nr TTR Air Interface Encryption MS-nr :,,, Dimetra IP R6.1SSR, SwMI - Sepura, SRH3800, Terminal 13/16 - tetra_ctc.iscom@icomunicazioni.it

14 Security Class 2 Air Interface Encryption Location Updating and AI Signalling Protection Communications between parties using encryption Communications between clear and encrypted parties Communications between encrypted parties on a channel designated to operate in clear Authentication during location updating Security Class 3 Air Interface Encryption Location Updating and AI Signalling Protection DCK Forwarding at MS request DCK Forwarding by SwMI (without MS request) DCK Retrieval CCK provisioning during location updating Announcement of Change of CCK Communications between parties using encryption Communications between clear and encrypted parties Communications between encrypted parties on a channel designated to operate in clear 9_pass_of_9 21_pass_of_21 10 MS-nr 6_pass_of_6 7_pass_of_7 6_pass_of_6 MS-nr :,,, Dimetra IP R6.1SSR, SwMI - Sepura, SRH3800, Terminal 14/16 - tetra_ctc.iscom@icomunicazioni.it

15 Authentication during clear cell reselection Authentication during encrypted location update Change of Security Class Seamless change to Security Class 2 for BS Fallback operation Non-seamless change to Security Class 2 for BS Fallback operation Change to Security Class 1 for BS Fallback operation Enable and temporary disable of an MS Enable and temporary disable of an MS without authentication Enable and temporary disable of an MS with authentication Registration of a temporary disabled MS Rejection of applicable invalid enable/disable requests Removable SIMs do not affect the subscriber or equipment that has been enabled/disabled Disabling of an MS during a call or while on the PDCH Permanent disable of an MS Permanent disable of an MS with authentication Permanently Disabled MS cannot send air interface signalling TTR Enable / Disable MS-nr 5_pass_of_5 5_pass_of_5 8_pass_of_8 MS-nr MS-nr :,,, Dimetra IP R6.1SSR, SwMI - Sepura, SRH3800, Terminal 15/16 - tetra_ctc.iscom@icomunicazioni.it

16 ANNEX A: Declaration () :,,, Dimetra IP R6.1SSR, SwMI - Sepura, SRH3800, Terminal 16/16 - tetra_ctc.iscom@icomunicazioni.it