TETRA Interoperability Certificate. Airbus D&S, Tetra System Rel 7.0, SwMI Sepura, SC2020, Terminal. Helsinki, June 2015

Transcription

1 : ISCTI TETRA Interoperability Certificate Helsinki, June 2015 Latest SwMI SW Release: Latest SwMI HW Release: Rel7.0 M98F (DXTip) Latest Terminal SW Release: Latest Terminal HW Release: TP01STW ISCTI (Istituto Superiore delle Comunicazioni e delle Tecnologie dell'informazione) certifies, that the Airbus D&S, Tetra System Rel 7.0, SwMI and the Sepura, SC2020, terminal have been subject to interoperability testing for the certified features listed on second page of this certificate, in accordance with the TETRA Interoperability Profiles, TIP compliance Test Plan and related TETRA interoperability requirement tables. The table lists all the available TETRA interoperability profiles, and summarizes the main functionalities of every profile according to the TETRA interoperability requirement tables. A feature is when it has been successfully tested during the last test session with one of the testing method described in the TETRA process document part 1 (TPD001-01). A breakdown into the feature details is given in the Feature Compliance Overview section of this certificate. This certificate has been issued following a fully witnessed single test session between Airbus D&S and Sepura on June Detailed test results are listed in the Test Report associated to this Certificate. Details and explanation about the procedure used to provide verdicts are in the TIC process TPD IOP test engineer Head of the Procedure Radio Office Manager ISCTI - V.le America 201, Rome, Italy Ph.: , Fax: tetra_ctc.iscom@sviluppoeconomico.gov.it, Web: Date of issue: 17 December /24

2 features Tetra Association TTR001-01:Core Registration Group Management Group call Individual call Status messages Pre-emptive Priority Call Emergency Call Cell Re-selection PSTN interconnect MS-ISDN Numbering In Call Signalling Subscriber Class Procedures Common Secondary Control Channels BS Fallback Operation Energy Economy Mode - Transmit Inhibit Mixed band operation Tetra Association TTR001-02:SDS SDS Type 1, 2 or 3 - SDS-TL Store and Forward Tetra Association TTR001-03:DGNA Multipart SDS - Support for individually addressed DGNA Support for group addressed DGNA - Tolerance of unsupported DGNA functions - 2/24

3 Tetra Association TTR001-04:Auth SwMI Initiated (non-mutual) Authentication SwMI Initiated Authentication made Mutual by MS TEI Query Tetra Association TTR001-05:PD Context Management Single Slot Packet Data Partial Multi Slot Packet Data - TEDS - Mixed band operation - Tetra Association TTR001-07:FSSN Fleet Specific Short Numbering Tetra Association TTR001-09:AL Ambience Listening Interaction with Transmit Inhibit Tetra Association TTR001-10:E2EE E2EE Voice Call Tetra Association TTR001-11:AIE Security Class 2 Air Interface Encryption Security Class 3 Air Interface Encryption Security Class 3G Air Interface Encryption - Management of CMG and GSKO - Key Status demand - Change of Security Class for Fallback operation Change of Security Class (other than for Fallback operation) - Key Management for Secure Direct Mode Operation - Tetra Association TTR001-12:SI MS initiated Service Interaction SwMI initiated Service Interaction Call Waiting - 3/24

4 Tetra Association TTR001-13:ED Enable and temporary disable of an MS Permanent disable of an MS Tetra Association TTR001-17:RUA Radio User Assignment Tetra Association TTR001-19:LIP Location Information Protocol Tetra Association TTR001-20:CF Call Forwarding Unconditional Call Forwarding Conditional Call Forwarding Information Displayed - 4/24

5 Feature Compliance Overview The first pages of this certificate provide an indication about the main interoperable TETRA features for each TIP specification (as described in the TIC-RT). The main interoperable TETRA features results depend on a set of sub-features, the verdicts associated to each sub-feature are directly derived from the analysis of the performed test cases. The results associated to each feature and sub-feature are shown in the "Feature Compliance Report" table below. The main features are indicated with blue background and the associated sub-features (or second level features) have a white background. The outcome assigned to a feature as shown on page 2, is derived by the Feature Compliance Report tables. Outcome Partial - Definition All required tests have been performed and passed Not all the required tests have been performed but none have failed Feature cannot be certified e.g. it is not supported by at least one product, no tests were performed, or some tests were performed but at least one failed The outcome is derived from the verdict assigned to a sub feature which is the result of an analysis of the test case results listed in the Test Report. The verdict assigned to each subfeature is derived from one or several test case results or test steps result, the TETRA Interoperability requirement tables (TIC-RTs) indicate the link between sub-features and test cases for the certified set of equipment capabilities (see Test Report). Verdict Passed Incomplete Failed Definition All mandated tests or steps of tests linked to this functionality (as per TIC-RT indication) are compliant with the TIP specification relevant to this feature or sub-feature Not all Mandated tests (as per TIC-RT indication) have been executed At least one of mandated test or steps of tests linked to this functionality failed to match the TIP specification relevant to this feature or sub-feature The verdict associated to the feature or sub-feature gives also indication about the method used 5/24

6 to test that feature or sub-feature. The allowed testing Methods are listed in the table below, a complete description of the procedures and constraints associated to each of them can be found in the "TPD TETRA Interoperability Certification Process Description" document. Testing Method Complete Spot Regression Regression on spot Witnessed Description All mandated tests associated to the feature or sub-feature have been executed Only a selection of the mandatory test cases associated to the feature or sub-feature has been executed during the test session. These tests are a subset of the tests performed on an equivalent software which has been "completely" tested against the same functionality on a different equipment, see manufacturer declaration in the associated Test Report Only a selection of the mandatory test cases associated to the feature or sub-feature has been executed during the test session. These tests are a subset of the tests performed on a previous version of the same software which has been "completely" tested in a previous test session against the same functionality, see manufacturer definition in the associated Test Report The regression method (see the previous item) has been applied at this session on the verdicts from the referenced (previous) session where the spot testing method (see above) had been applied. The TIP heading lines in the Feature Compliance Report indicate whether each TIP is partially or fully witnessed by the Certification Body. Additionally, for a partially-witnessed TIP, the number of witnessed test cases that passed is shown for each the feature and sub-feature. There may have been some unwitnessed passed tests and they will have been found to be successful based on the log file evaluation Depending on equipment capabilities declared by the manufacturer, some features or sub features cannot be tested. The following table describes meaning of the used abbreviation: Indication Not supported Definition The SwMI and/or MS do not support the minimum features required to verify these items ISCTI has made every effort to ensure that every result has been correctly evaluated in 6/24

7 accordance with the relevant TIPs, Test Plans and TIC-RTs. ISCTI has no liability for the test results, or towards the manufacturers. The table on the following page lists HW and SW releases of SwMI and Terminal under test in the last four test sessions and the used TIP specifications, Test Plans and TIC-RTs. This Certificate and Certificates from previous test sessions are available on the TETRA + Critical Communications Association web site ( The feature results are shown in the tables below. Information on equipment under test and document references Test Session Date/Place Airbus D&S, Helsinki, June 2015 SwMI Type Tetra System Rel 7.0 SwMI HW Release SwMI SW Release Terminal Type M98F (DXTip) Rel7.0 SC2020 Terminal HW Release Terminal SW Release TIP Specs and TIP Compliance Test Plans TP01STW Core TTR v6.1.1 IOP TIC-RT v3.1.0 v2.6.3 SDS TTR v2.1.3 IOP TIC-RT v2.0.0 v /24

8 DGNA TTR v2.0.0 IOP v2.0.1 TIC-RT v2.2.3 Auth TTR v3.0.0 IOP v2.0.0 TIC-RT v2.2.6 PD TTR v3.0.0 IOP v4.0.0 TIC-RT v4.0.0 FSSN TTR v1.0.0 IOP v2.0.0 TIC-RT v1.2.2 AL TTR v2.0.0 IOP v1.1.0 TIC-RT v1.2.3 E2EE TTR v2.0.0 IOP v1.1.0 TIC-RT v1.2.3 AIE TTR v3.0.3 IOP v3.0.2 TIC-RT v3.2.6 SI TTR v1.0.0 IOP v1.0.0 TIC-RT v1.2.8 ED TTR v2.0.0 IOP v1.0.0 TIC-RT v1.4.7 RUA TTR v1.0.1 IOP v1.0.0 TIC-RT v1.1.0 LIP TTR v1.0.0 IOP v1.0.0 TIC-RT v /24

9 CF TTR v1.0.1 IOP TIC-RT v0.0.5 v /24

10 Feature compliance report Test Session Airbus D&S Helsinki June 2015 Core - Fully Witnessed Testing Registration 6_pass_of_6 Initial registration SwMI initiated location updating LA timer based Periodic location updating De-registration Group Management 15_pass_of_15 Single group attachment 7_pass_of_7 Multiple group attachment MS initiated group detachment SwMI initiated group management 6_pass_of_6 10/24

11 Group call Normal group call Late entry Priority Group scanning 13_pass_of_13 6_pass_of_6 Call setup modifications Resource Queuing based on Call Priority Broadcast Call Limited coverage notification Individual call Simplex individual call Duplex individual call Call setup modifications Resource Queuing based on Call Priority Indication of imminent call disconnection 10_pass_of_10 11/24

12 Status messages Individual addressed Status transfer Group addressed Status transfer Pre-emptive Priority Call Pre-emption of Resources Pre-emption of Busy Users Emergency Call Pre-emption of Resources Pre-emption of Busy Users Call setup modifications Call disconnection by non-call owner Cell Re-selection Undeclared Unannounced 6_pass_of_6 5_pass_of_5 21_pass_of_21 12/24

13 Announced - with Call Restoration Announced - without Call Restoration Expedited PSTN interconnect TETRA Originated Call PSTN Originated Call DTMF over-dial Emergency Telephone Calls MS-ISDN Numbering MS ISDN - Voice Call MS-ISDN Status In Call Signalling Slow Signalling on Traffic Channel (SACCH) Fast Signalling on Traffic Channel (FACCH) Subscriber Class Procedures 11 6_pass_of_6 8_pass_of_8 10_pass_of_10 13/24

14 Cell Selection based on Subscriber Class Subscriber Class Delivery during Location Update Use of Preferred Subscriber Classes Common Secondary Control Channels One C-SCCH per cell Two C-SCCH per cell Three C-SCCH per cell BS Fallback Operation Switch to/from BS Fallback Operation Roaming to avoid a cell in BS Fallback Operation Services with BS Fallback Operation Ignore a cell in Fallback Operation User selectable Fallback behaviour Energy Economy Mode Energy Economy Mode Operation 7_pass_of_7 11 6_pass_of_6 14/24

15 Transmit Inhibit TXI Activation & De- Activation TXI Activation & De- Activation with TxI Status available to the Dispatcher Receipt of group addressed service during TXI Mixed band operation Mixed band operation, intercell Mixed band operation, intracell 9_pass_of_9 Mixed band operation, Full Short Data Service (SDS) - Fully Witnessed Testing SDS Type 1, 2 or 3 SDS Type 1 SDS Type 2 SDS Type 3 SDS-TL Individually Addressed Group Addressed Using MS-ISDN dialling 11 15/24

16 Using UCS2 coding scheme Using 7-bit coding scheme Using 8-bit Latin 1 coding scheme Using 8-bit Latin 5 coding scheme Using 8-bit Latin 9 coding scheme Store and Forward Individually Addressed Group Addressed Multipart SDS Multipart SDS Complete Dynamic Group Number Assignment (DGNA) - Fully Witnessed Testing Support for individually addressed DGNA Support for individually addressed DGNA assignment without attachment Support for individually addressed DGNA assignment with attachment as selected group Support for individually addressed DGNA assignment with attachment as scanned group Support for individually addressed DGNA assignment with rejected attachment Support for individually addressed assigment for preprogrammed group Support for group addressed DGNA Support for group addressed DGNA assignment 8_pass_of_8 16/24

17 Management of 'group assignment lifetime' Support for group addressed DGNA deassignment Tolerance of unsupported DGNA functions MS tolerance of unsupported individual addressed DGNA signalling MS tolerance of unsupported group addressed DGNA signalling SwMI Initiated (non-mutual) Authentication Attach with authentication Roaming with authentication SwMI rejects MS during authentication MS rejects SwMI during authentication SwMI Initiated Authentication made Mutual by MS Attach with authentication Roaming with authentication TEI Query TEI Query Operation Context Management Context Activation User authentication Authentication - Fully Witnessed Testing Packet Data - Fully Witnessed Testing Incomplete 12_pass_of_13 Incomplete 8_pass_of_9 17/24

18 Single Slot Packet Data Data Transfer Cell re-selection Multi Slot Packet Data Data Transfer TEDS TEDS with Context Activation TEDS Data Transmission, using LLC Optimisation TEDS Cell Reselection, using LLC Optimisation Mixed band operation Mixed band operation, inter-cell Mixed band operation, intra-cell Mixed band operation, Full 9_pass_of_9 6_pass_of_6 FSSN - Fully Witnessed Testing Fleet Specific Short Numbering FSSN Addressed Individual Call FSSN as CPI/TPI in Group Call FSSN Addressed Status Messages FSSN Addressed SDS Text Messages 12_pass_of_12 TETRA Ambience Listening (SS-AL) - Fully Witnessed Testing Ambience Listening SS-AL Call Setup 5_pass_of_5 18/24

19 MS initiated SS-AL disconnection No Indication to affected user Interaction with Transmit Inhibit AL can override TxI AL cannot override TxI 5_pass_of_5 End to End Encryption - Fully Witnessed Testing E2EE Voice Call Individual (P2P) call Group (P2MP) call Clear Voice Override (CVO): Acceptance Clear Voice Override (CVO): User Initiated Clear Voice Override (CVO): Automatic 10_pass_of_10 Air Interface Encryption - Fully Witnessed Testing Security Class 2 Air Interface Encryption Location Updating and AI Signalling Protection TM-SCK provisioning during location updating Communications between parties using encryption Communications between clear and encrypted parties 19/24

20 Communications between encrypted parties on a channel designated to operate in clear OTAR of TM-SCK Change of TM-SCK Packet Data with Class 2 Air Interface Encryption Security Class 3 Air Interface Encryption Clear Location Updating and AI Signalling Protection Encrypted Location Updating and AI Signalling Protection DCK Forwarding at MS request DCK Forwarding by SwMI (without MS request) DCK Retrieval CCK provisioning during location updating Communications between parties using encryption Communications between clear and encrypted parties Communications between encrypted parties on a channel designated to operate in clear OTAR of CCK Change of CCK Packet Data with Class 3 Air Interface Encryption Security Class 3G Air Interface Encryption GCK Key Association setting Communications between parties using encryption 21_pass_of_21 7_pass_of_7 6_pass_of_6 6_pass_of_6 20/24

21 Communications between clear and encrypted parties OTAR of GCK Change of GCK Management of CMG and GSKO OTAR and change of CMG and GSKO Key Status demand SCK Key Status demand GCK Key Status demand GSKO Key Status demand Change of Security Class for Fallback operation Seamless change to Security Class 2 for BS Fallback operation Non-seamless change to Security Class 2 for BS Fallback operation Provisioning of TM-SCK for fallback to Security Class 2 operation Change to Security Class 1 for BS Fallback operation Change of Security Class (other than for Fallback operation) Change between Security Class 3 and Security Class 3G Change between Security Class 2 and Security Class 3 Change from Security Class 3G to Security Class 2 Key Management for Secure Direct Mode Operation OTAR of DM-SCK Change of DM-SCK Service Interaction - Fully Witnessed Testing MS initiated Service Interaction MS initiated Circuit Mode Call during another Circuit Mode Call 5_pass_of_5 21/24

22 MS initiated Circuit Mode Call during Packet Mode Transfer MS initiated Packet Mode Transfer during Circuit Mode Call SwMI initiated Service Interaction SwMI initiated Circuit Mode Call during another Circuit Mode Call SwMI initiated Circuit Mode Call during Packet Mode Transfer SwMI initiated Packet Mode Transfer during Circuit Mode Call Call Waiting Call Waiting in Individual Call Call Waiting in Group Call 6_pass_of_6 Enable Disable - Fully Witnessed Testing Enable and temporary disable of an MS Enable and temporary disable of an MS without authentication Enable and temporary disable of an MS with authentication Registration of a temporary disabled MS Rejection of applicable invalid enable/disable requests Removable SIMs do not affect the subscriber or equipment that has been enabled/disabled Disabling of an MS during a call or while on the PDCH Permanent disable of an MS Permanent disable of an MS with authentication 12_pass_of_12 5_pass_of_5 22/24

23 Permanently Disabled MS cannot send air interface signalling RUA - Fully Witnessed Testing Radio User Assignment Radio User Assignment at Location Updating Dispatcher initiated Radio User Assignment Radio User Dis-assignment 12_pass_of_12 7_pass_of_7 LIP - Fully Witnessed Testing Location Information Protocol LIP over SDS LIP over Packet Data Time based reporting Distance based reporting - NOT TESTABLE Reporting using Long reports Reporting Enable & Disable Temporary reporting control Trigger modification Immediate Location Reporting Reporting Lifetimes Error Reporting 19_pass_of_ _pass_of_6 23/24

24 Positioning on Individual Call Setup Call Forwarding - Fully Witnessed Testing Call Forwarding Unconditional Call Forwarding Unconditional Individual Call Call Forwarding Unconditional SDS Call Forwarding Unconditional Status Call Forwarding Conditional Call Forwarding Conditional Individual Call Call Forwarding Information Displayed Call Forwarding Information Displayed 24/24