TETRA Interoperability Certificate

Transcription

1 Interoperability Certificate Selex, BSNode, SwMI Sepura, SRG3900, Terminal Florence, November 2010 Latest SwMI SW Release: v6.0 Latest Terminal SW Release: Latest SwMI HW Release: /01.01-BSN- 400L/4 Eth Latest Terminal HW Release: MSUTW201T2C0G00 (Istituto Superiore delle Comunicazioni e delle Tecnologie dell'informazione) certifies, that the Selex, BSNode, SwMI and the Sepura, SRG3900, terminal have been subject to interoperability testing for the certified features listed on second page of this certificate, in accordance with the Interoperability Profiles, TIP compliance Test Plan and related interoperability requirement tables. The table lists all the available interoperability profiles, and summarizes the main functionalities of every profile according to the interoperability requirement tables. A feature is when it has been successfully tested during the last test session with one of the testing method described in the process document part 1 (TPD001). A breakdown into the feature details is given in the Feature Compliance Overview section of this certificate. Detailed test results and explanation about the procedure used to provide verdicts are listed in the Test Report associated to this Certificate. IOP test engineer Radio Office Manager - V.le America 201, Rome, Italy Ph.: , Fax: tetra_ctc.iscom@sviluppoeconomico.gov.it, Web: Date of issue: 16 March 2011 v 01 1/16 - tetra_ctc.iscom@isviluppoeconomico.gov.it

2 features Tetra Association TTR001-01:Core Registration Group Management Group call Individual call Status messages Pre-emptive Priority Call Emergency Call Cell Re-selection PSTN interconnect MS-ISDN Numbering - In Call Signalling Subscriber Class Procedures Common Secondary Control Channels BS Fallback Operation Energy Economy Mode - Transmit Inhibit Tetra Association TTR001-02:SDS SDS Type 1, 2 or 3 - SDS-TL Store and Forward - Tetra Association TTR001-03:DGNA Support for individually addressed DGNA Support for group addressed DGNA - Tolerance of unsupported DGNA functions - Tetra Association TTR001-04:Auth 2/16 - tetra_ctc.iscom@isviluppoeconomico.gov.it

3 SwMI Initiated (non-mutual) Authentication SwMI Initiated Authentication made Mutual by MS Tetra Association TTR001-05:PD TEI Query - Context Management Single Slot Packet Data Multi Slot Packet Data Tetra Association TTR001-09:AL Ambience Listening Interaction with Transmit Inhibit Tetra Association TTR001-10:E2EE E2EE Voice Call Tetra Association TTR001-11:AIE Security Class 2 Air Interface Encryption Security Class 3 Air Interface Encryption Partial Security Class 3G Air Interface Encryption - Change of CMG and GSKO - Key Status demand - Change of Security Class for Fallback operation Change of Security Class (other than for Fallback operation) Key Management for Secure Direct Mode Operation - Tetra Association TTR001-12:SI - MS initiated Service Interaction SwMI initiated Service Interaction Tetra Association TTR001-13:ED Enable and temporary disable of an MS Permanent disable of an MS Tetra Association TTR001-20:CF Call Forwarding Unconditional 3/16 - tetra_ctc.iscom@isviluppoeconomico.gov.it

4 Call Forwarding Conditional Call Forwarding Information Displayed - Feature Compliance Overview The first pages of this certificate provide an indication about the main interoperable features for each TIP specification (as described in the TIC-RT). The main interoperable features result depend on a set of subfeature, the verdicts associated to each sub-feature are directly derived from the analysis of the performed test cases. The results associated to each feature and sub-feature are shown in the "Feature compliance report" table below. The main features are indicated with grey background and the associated sub-features (or second level features) have white background. The verdict assigned to a sub-feature as shown on page 2, is derived by the Feature compliance report tables. Verdict Partial _ Definition All required tests have been performed and passed Not all the required tests have been performed but none have failed Feature cannot be certified e.g. it is not supported by at least one product, no tests were performed, or some tests were performed but at least one failed The verdict assigned to a sub feature is the result of an analysis of the test case results listed in the Test Report. The verdict assigned to each sub-feature is derived from one or several test case results or test steps result, the Interoperability requirement tables (TIC-RTs) indicate the link between sub-features and test cases for the certified set of equipment capabilities (see Test Report) Verdict Passed (notex) Definition All mandated tests or steps of tests linked to this functionality (as per TIC-RT indication) are compliant with the TIP specification relevant to this feature. A note can be associated to this result, if further clarification on the behaviour of the equipment is needed 4/16 - tetra_ctc.iscom@isviluppoeconomico.gov.it

5 Time_limited Not all Mandated tests (as per TIC-RT indication) have been executed (ran out of time) The verdict associated to the feature gives also indication about the method used to test that feature. The allowed testing Methods are listed in the table below, a complete description of the procedures and constraints associated to each of them can be found in the "TPD001 Interoperability Certification Process Description" document. Testing Method Complete Regression Regression on spot Description All mandated tests associated to the feature have been executed Only a selection of the mandatory test cases associated to the feature has been executed during the test session. These tests are a subset of the tests performed on an equivalent software which has been "completely" tested against the same functionality on a different equipment, see manufacturer declaration in annex A Only a selection of the mandatory test cases associated to the feature has been executed during the test session. These tests are a subset of the tests performed on a previous version of the same software which has been "completely" tested in a previous test session against the same functionality, see manufacturer definition in annex A The regression method has been applied on the verdicts based on the spot testing method Depending on equipment capabilities declared by the manufacturer, some features or sub features cannot be tested. The following table describes meaning of the used abbreviation Indication Not supported Definition The SwMI and/or MS do not support the minimum features required to verify these items has made every effort to ensure that every result has been correctly evaluated in accordance with the relevant TIPs, Test Plans and TIC-RTs. has no liability for the test results, or towards the manufacturers, The table on the following page lists HW and SW releases of SwMI and Terminal under test in the last four test sessions and the used TIP specifications, Test Plans and TIC-RTs This Certificate and Certificates from previous test sessions are available on the Association web site ( The feature results are shown in the tables below 5/16 - tetra_ctc.iscom@isviluppoeconomico.gov.it

6 Information on equipment under test and document references Test Session Date/Place SwMI Type Selex, Florence, November 2010 Bs-Node (SSN) SwMI HW Release SwMI SW Release v6.0 Terminal Type /01.01-BSN- 400L/4 Eth SRG3900 Terminal HW Release MSUTW201T2C0G00 Terminal SW Release TIP Specs and TIP Compliance Test Plans Core SDS DGNA Auth TTR v5.0.0 IOP v2.6.0 TIC-RT v246 TTR v2.0.1 IOP v2.0.0 TIC-RT v211 TTR v2.0.0 IOP v2.0.1 TIC-RT v217 TTR v3.0.0 IOP v2.0.0 TIC-RT v222 6/16 - tetra_ctc.iscom@isviluppoeconomico.gov.it

7 PD AL E2EE AIE SI ED CF TTR v2.0.0 IOP v2.0.0 TIC-RT v228 TTR v2.0.0 IOP v1.1.0 TIC-RT v121 TTR v2.0.0 IOP v1.1.0 TIC-RT v120 TTR v3.0.0 IOP v3.0.0 TIC-RT v3018 TTR v1.0.0 IOP v1.0.0 TIC-RT v122 TTR v2.0.0 IOP v1.0.0 TIC-RT v143 TTR v1.0.1 IOP v0.0.5 TIC-RT v106 7/16 - tetra_ctc.iscom@isviluppoeconomico.gov.it

8 Feature compliance report Test Session Please Enter Test Venue And Date Core Registration ITSI attach SwMI initiated location updating LA timer based Periodic location updating De-registration Group Management Single group attachment Multiple group attachment MS initiated group detachment 0_pass_of_3 PASSED 2_pass_of_10 PASSED 1_pass_of_6 PASSED 2_pass_of_6 SwMI initiated group management Group call Normal group call Late entry Priority Group scanning Call setup modifications Resource Queuing based on Call Priority Broadcast Call PASSED 3_pass_of_12 PASSED 2_pass_of_5 PASSED Limited coverage notification 8/16 - tetra_ctc.iscom@isviluppoeconomico.gov.it

9 Individual call Simplex individual call Duplex individual call PASSED 2_pass_of_10 PASSED 1_pass_of_4 PASSED Call setup modifications Resource Queuing based on Call Priority Indication of imminent call disconnection Status messages Individual addressed Status transfer Group addressed Status transfer Pre-emptive Priority Call Pre-emption of Resources Pre-emption of Busy Users Emergency Call Pre-emption of Resources Pre-emption of Busy Users Call setup modifications Cell Re-selection Undeclared Unannounced Announced - with Call Restoration Announced - without Call Restoration PSTN interconnect Originated Call PSTN Originated Call DTMF over-dial 0_pass_of_4 0_pass_of_4 0_pass_of_3 PASSED 1_pass_of_7 PASSED 1_pass_of_5 0_pass_of_5 PASSED 5_pass_of_15 PASSED 2_pass_of_3 PASSED 3_pass_of_11 PASSED 2_pass_of_6 PASSED 9/16 - tetra_ctc.iscom@isviluppoeconomico.gov.it

10 Emergency Telephone Calls PASSED MS-ISDN Numbering MS ISDN - Voice Call MS-ISDN Status In Call Signalling Slow Signalling on Traffic Channel (SACCH) Fast Signalling on Traffic Channel (FACCH) Subscriber Class Procedures Cell Selection based on Subscriber Class Subscriber Class Delivery during Location Update Use of Preferred Subscriber Classes Common Secondary Control Channels One C-SCCH per cell Two C-SCCH per cell Three C-SCCH per cell BS Fallback Operation Switch to/from BS Fallback Operation Roaming with BS Fallback Operation Services with BS Fallback Operation PASSED 2_pass_of_8 PASSED 1_pass_of_4 PASSED 1_pass_of_4 PASSED 2_pass_of_5 PASSED Complete 1_pass_of_1 PASSED 0_pass_of_5 0_pass_of_4 PASSED 3_pass_of_11 PASSED PASSED PASSED 1_pass_of_7 Energy Economy Mode Energy Economy Mode Operation Transmit Inhibit TXI Activation & De-Activation without Status message TXI Activation & De-Activation with Status message Receipt of group addressed service during TXI PASSED 1_pass_of_9 0_pass_of_3 PASSED 1_pass_of_4 10/16 - tetra_ctc.iscom@isviluppoeconomico.gov.it

11 Short Data Service (SDS) SDS Type 1, 2 or 3 SDS Type 1 SDS Type 2 SDS Type 3 SDS-TL Individually Addressed Group Addressed Using MS-ISDN dialling Using UCS2 coding scheme Using 7-bit coding scheme PASSED 1_pass_of_5 PASSED Complete 1_pass_of_1 Store and Forward Individually Addressed Group Addressed Dynamic Group Number Assignment (DGNA) Support for individually addressed DGNA Support for individually addressed DGNA assignment without attachment Support for individually addressed DGNA assignment with attachment as selected group Support for individually addressed DGNA assignment with attachment as scanned group Support for individually addressed DGNA assignment with rejected attachment Support for individually addressed assigment for pre-programmed group PASSED 2_pass_of_10 PASSED 1_pass_of_4 PASSED 1_pass_of_4 0_pass_of_5 Support for group addressed DGNA Support for group addressed DGNA assignment Management of 'group assignment lifetime' 11/16 - tetra_ctc.iscom@isviluppoeconomico.gov.it

12 Support for group addressed DGNA deassignment Tolerance of unsupported DGNA functions MS tolerance of unsupported individual addressed DGNA signalling MS tolerance of unsupported group addressed DGNA signalling Authentication SwMI Initiated (non-mutual) Authentication Attach with authentication Roaming with authentication SwMI rejects MS during authentication MS rejects SwMI during authentication SwMI Initiated Authentication made Mutual by MS Attach with authentication Roaming with authentication PASSED 2_pass_of_4 PASSED PASSED Complete 1_pass_of_1 TEI Query TEI Query Operation Packet Data Context Management Context Activation User authentication Single Slot Packet Data Data Transfer Cell re-selection Multi Slot Packet Data Data Transfer PASSED 2_pass_of_7 PASSED 2_pass_of_7 PASSED 2_pass_of_8 PASSED 1_pass_of_5 PASSED PASSED PASSED Ambience Listening (SS-AL) 12/16 - tetra_ctc.iscom@isviluppoeconomico.gov.it

13 Ambience Listening SS-AL Call Setup MS initiated SS-AL disconnection No Indication to affected user Interaction with Transmit Inhibit AL can override TxI AL cannot override TxI PASSED 2_pass_of_5 PASSED 2_pass_of_3 PASSED 2_pass_of_5 End to End Encryption E2EE Voice Call Individual (P2P) call Group (P2MP) call Clear Voice Override (CVO) PASSED 2_pass_of_6 PASSED 1_pass_of_4 PASSED Air Interface Encryption Security Class 2 Air Interface Encryption Location Updating and AI Signalling Protection TM-SCK provisioning during location updating Communications between parties using encryption Communications between clear and encrypted parties Communications between encrypted parties on a channel designated to operate in clear OTAR and Change of TM-SCK Security Class 3 Air Interface Encryption Location Updating and AI Signalling Protection DCK Forwarding at MS request DCK Forwarding by SwMI (without MS request) PASSED 4_pass_of_11 PASSED 2_pass_of_4 PASSED PASSED Time_Limited 6_pass_of_19 Time_Limited 2_pass_of_9 Time_Limited 0_pass_of_6 13/16 - tetra_ctc.iscom@isviluppoeconomico.gov.it

14 DCK Retrieval CCK provisioning during location updating Communications between parties using encryption Communications between clear and encrypted parties Communications between encrypted parties on a channel designated to operate in clear OTAR and Change of CCK Security Class 3G Air Interface Encryption GCK Key Association setting Communications between parties using encryption Communications between clear and encrypted parties OTAR and Change of GCK PASSED 2_pass_of_6 PASSED Complete 2_pass_of_2 PASSED PASSED Change of CMG and GSKO OTAR and change of CMG and GSKO Key Status demand SCK Key Status demand GCK Key Status demand GSKO Key Status demand Change of Security Class for Fallback operation Seamless change to Security Class 2 for BS Fallback operation Non-seamless change to Security Class 2 for BS Fallback operation Provisioning of TM-SCK for fallback to Security Class 2 operation Change to Security Class 1 for BS Fallback operation Change of Security Class (other than for Fallback operation) Change between Security Class 3 and Security Class 3G 0_pass_of_3 0_pass_of_3 14/16 - tetra_ctc.iscom@isviluppoeconomico.gov.it

15 Change between Security Class 2 and Security Class 3 Change from Security Class 3G to Security Class 2 Key Management for Secure Direct Mode Operation OTAR and change of DM-SCK Service Interaction MS initiated Service Interaction MS initiated Circuit Mode Call during another Circuit Mode Call MS initiated Circuit Mode Call during Packet Mode Transfer MS initiated Packet Mode Transfer during Circuit Mode Call SwMI initiated Service Interaction SwMI initiated Circuit Mode Call during another Circuit Mode Call SwMI initiated Circuit Mode Call during Packet Mode Transfer SwMI initiated Packet Mode Transfer during Circuit Mode Call PASSED 2_pass_of_5 PASSED PASSED PASSED 2_pass_of_10 PASSED 2_pass_of_8 Enable Disable Enable and temporary disable of an MS Enable and temporary disable of an MS without authentication Enable and temporary disable of an MS with authentication Registration of a temporary disabled MS Rejection of applicable invalid enable/disable requests Removable SIMs do not affect the subscriber or equipment that has been enabled/disabled Disabling of an MS during a call or while on the PDCH Permanent disable of an MS Permanent disable of an MS with authentication Permanently Disabled MS cannot send air interface signalling PASSED 6_pass_of_22 PASSED 2_pass_of_6 0_pass_of_6 PASSED PASSED PASSED 2_pass_of_5 0_pass_of_4 0_pass_of_3 15/16 - tetra_ctc.iscom@isviluppoeconomico.gov.it

16 Call Forwarding Call Forwarding Unconditional Call Forwarding Unconditional Individual Call Call Forwarding Unconditional SDS Call Forwarding Unconditional Status Call Forwarding Conditional Call Forwarding Conditional Individual Call PASSED PASSED Complete 1_pass_of_1 PASSED PASSED Call Forwarding Information Displayed Call Forwarding Information Displayed 16/16 - tetra_ctc.iscom@isviluppoeconomico.gov.it