LINKSYS VELOP + CUJO SETUP (STEP-BY-STEP GUIDE)

Transcription

1 LINKSYS VELOP + CUJO SETUP (STEP-BY-STEP GUIDE) 1. Linksys Velop setup 1.1 The demo setup was performed on iphone, but all steps apply to Android environment too. Linksys Velop mesh system nodes are being recognized through Bluetooth so before starting the setup enable Bluetooth on your smartphone: 1.2 Download and install the Linksys Velop app: 1.3 Open the app:

2 1.4 Since this is a fresh setup choose new setup option: 1.5 In the following screen choose Velop system: 1.6 Agree to the terms and conditions:

3 1.7 In the second screen, you need to choose current network setup model. Most likely it would be the second option: 1.8 The following steps are self-explanatory, simply follow the app directions:

4 1.9 When the main node found follow instructions how to connect your smartphone to Velop WiFi: 1.10 After the phone is on Velop s WiFi press Okay, try it now button in the app:

5 1.11 Next, you ll be linked to the login screen. If the customer does not have an account fill the form and create the new one (1) if he already has it (like in this demo) proceed by clicking Log in here (2): 1.12 The app will check the connection: 1.13 When the connectivity test is done you ll be linked to WiFi settings. Create a network name and password which is necessary to access the network: 1.14 Wait while settings are being applied:

6 1.15 After that follow the directions and connect your phone to newly configured WiFi network: 1.16 When your smartphone is on newly configured WiFi Network click Okay, Try it now : 1.17 Wait while the app is checking connection and follow further directions to finish main node setup:

7 1.18 The main node is set. Let s activate another node to create a mesh network. Follow the directions in the app:

8 1.19 The Velop system might include two or three nodes. In this demonstration, we used two nodes system, so we re going to finish the setup by clicking That s it for now. If the customer chose three nodes option you need to repeat step 1.18:

9 1.20 Three more clicks will finalize the Velop Setup: At this point, Linksys Velop mesh WiFi system is up and running.

10 2.1 Download and install CUJO app: 2. CUJO setup 2.2 Open the app and click Sign Up to create a new account: 2.3 Agree to terms and conditions:

11 2.4 Fill out the registration form, click Sign up and follow further direction to creating CUJO account (Important use the cell number because the account would be verified with the code sent via SMS): 2.5 The account created and verified. The next screen will link you to CUJO device setup. Connect CUJO with the main Linksys Velop node with the ethernet cable from CUJO box. One plug should be turned into the free ethernet port in Velop node and another into CUJO ethernet port number 1 (first one above power port). When both CUJO and Velop node are connected turn on CUJO into a power outlet using power cable from CUJO box and wait for CUJO eyes to be shiny in happy position (upper lids). Click Next in the CUJO app: 2.6 Make sure that your phone connected to the Linksys Velop WiFI network. If the cellular data or VPN are running in the phone turn them off and click Next :

12 2.7 Wait while CUJO device is activating: 2.8 After the device activation is done the app will offer you to set up CUJO device with the Linksys Velop router, click Next and wait while initial setup is being proceeded: 2.9 During initial setup CUJO tries to modify router settings using default credentials, but it s not a case with the Velop so you would be linked to the router login screen. In this form you need to enter credentials from the step address and password:

13 2.10 CUJO will modify Velop settings: 2.11 When the changes are applied you ll be linked to reboots screen. Turn off CUJO from the power outlet for 5-10 seconds turn it on again and click Next in the app: 2.12 The app will look from CUJO to appear online. It might take a couple of minutes:

14 2.13 When app will sync with the CUJO device you ll be linked to the activation finish screen, the CUJO and Velop setup done: