Category 7A/7 Cabling Solutions P5 Voice & Outlets Product P24. Category 7A S/FTP Cable P6 Category 3 Indoor Multi Pair Cable P25

Transcription

1

2 COPPER SOLUTION Content Index Category 7A/7 Cabling Solutions P5 Voice & Outlets Product P24 Category 7A S/FTP Cable P6 Category 3 Indoor Multi Pair Cable P25 Category 7 S/FTP Cable P7 Category 3 Voice Patch Panel (25 Port & 50 Port) P25 P26 Category 6A Cabling Solutions P8 Accessories P27 Category 6A S/FTP 4 Pairs PVC/LSZH Cable P10 Accessories for CAT 5E/6/6A UK Style P28 Category 6A F/FTP 4 Pairs PVC/LSZH Cable - Accessories for CAT 5E/6/6A European Style P29 Category 6A U/UTP 4 Pairs LSZH/PVC Cable P11 Other CAT 5E/CAT 6/CAT 6A UTP Tool Free Panel P30 Category 6A U/FTP 4 Pairs PVC/LSZH Cable - UTP Blank Panels P31 Category 6A 90 o Shielded Patch Panel with Back Cover P12 Cable Management P32 Category 6A 180 o Unshielded Patch Panel - CAT 5E, CAT 6 & CAT 6A Newly Designed OEM P33 - P34 Category 6A Shielded High Density RJ45 Patch Panel P13 Test Reports P35 - P36 Category 6A 180 o Zinc-casted Shielded Keystone Jack, Toll-Free - Category 6A 180 o Unshielded Keystone Jack, Toll-Free P14 Category 6A Shielded and Unshielded Keystone Jack - Punch Down Type - Category 6A Unshielded Twisted Pair (UTP) Patch cords P15 Category 6A S/FTP Shielded LSZH/PVC Patch Cords - Category 6 Cabling Solutions Category 6 F/UTP, SF/UTP and U/UTP 4Pairs PVC/LSZH Cable Category 6 UTP Patch Panel, PCB Type 0.5U/1U 24 Port P16 P18 - P19 P20 Category 6 Unshielded Twisted Pair (UTP) Patch Panel PCB Type 24/48 Port - Category 6 Shielded Twisted Pair (STP) Patch Panels P21 Category o Unshielded Patch Panel - Tool Free - Category 6 Unshielded (UTP) Module Low Profile P22 Category 6 Unshielded PVC/LSZH Patch Cords - Category 6 Shielded and Unshielded Keystone Jack - Tool Free P23 Category 6 Shielded and Unshielded keystone Jacks - Punch Down Type -

3 High Performance for the Future OPTiFab, Your Professional Partner for Structured Cabling Systems OPTiFab International is a leading UK fibre optic manufacturer and supplier based in Milton Keynes. We specialize in the manufacture of fibre optic communication and networking products for bespoke and general optical applications. Our products range from basic passive infrastructure to active categories, including POF (plastic optical fibre) FTTH (fibre to the home), which is the new forefront in home entertainment. OPTiFab s current broad product range is built on fundamental technologies and specialist engineering personnel, whose experience spans over forty years. The company s ethos is to present clients with cost effective solutions, providing a high degree of reliability and offer outstanding performance characteristics. We offer a comprehensive selection of fibre optic and fibre related products to clients in different industries and regions. OPTiFab also offers bespoke manufacturing services and we work together with our clients in providing specific solutions -meeting international standards. We constantly screen the raw materials of our products to ensure the compliance with RoHS standards to serve our environment. Quality & Service OPTiFab International has dedicated teams responsible for internal quality monitoring and systemic product upgrades, which are also responsible for customer quality & technical support, as well as service maintenance. All products are verified from the input of raw material and are constantly monitored until the production process is finished. We offer a complete quality & services policy based on the latest international standards, our ISO 9001 Certificate and our RoHS Assurance on Restricted Substances Certificate to ensure best possible performance. 25 Years System Warranty Policy All OPTiFab International supplied copper and optical cabling systems, which are installed and tested by an authorized OPTiFab International installer in accordance with the OPTiFab International Cabling System Installation manual, are supplied with a 25 year system warranty. OPTiFab International has a complete channel program for distributor authorization, installer courses, warranty publishing, marketing & technical service, worldwide strategy and information sharing. This combines our strengths to support global sales expansion and your overall success in the cabling business. Our Advantages Guarantees all comprehensive OPTiFab Intl data network systems (consisting entirely of OPTiFab Intl products) for 25 years Cabling training and certification courses Dedicated R&D team for new product design Professional sales team for worldwide marketing guidance Factory-based product management & logistic teams for technical, quality and logistics support

4

5 Access to High Speed Ethernet Category 7A/7 Cabling Solutions OPTiLite CATEGORY 7A/7 CABLING SOLUTIONS Installation Cable Category 7A S/FTP 4Pairs LSZH/PVC Category 7 S/FTP 4Pairs LSZH/PVC 10G Standard 2006, Standard IEEE 802.3an is ratified to provide 10 Gbit/s connections over unshielded or shielded twisted pair cables and specified transmission characteristics up to 500MHz. This requires Category 6A or better balanced twisted pair cables, which comply with ISO amendments 2 or ANSI/TIA-568-C.2 to support 10GBASE-T up to distances of 100m. So far, 10G BASE-T Ethernet is the fastest LAN connection path over copper communication solutions. 10G Bandwidth 10G BASE-T system requires the cable works as full duplex mode, which means it uses 4 pairs for simultaneous transmission in both directions and to support 100m data transmission, it must use Category 6A 500MHz at a minimum. OPTiFab International Category 6A+ 1000MHz communication cable, with the significantly higher bandwidth to provide bigger quantity of data path, definitely guarantees you a stable and practical 10G network, which is capable of supporting higher speed applications. For future data network upgrades, OPTiFab International s 1000MHz cable is specially designed to assure the bandwidth to be compatible with ever faster network changes and development. System upgrades are practical and easy, as you only need to change the module on both sides for the permanent links.

6 CATEGORY 7A/7 CABLING SOLUTIONS Cable Category 7A S/FTP 4Pairs LSZH/PVC Standards: ISO/IEC 11801:2011 (Ed. 2.2) IEC :2009 (Ed. 2.0) EN :2011 EN :2007 including amendment A1:2010 EN :2003 IEC [1,2]:2004 IEC [1,2] IEC [1,2] REACH / SvHC Compliant regulation (EC) No. 1907/2006 Low Smoke Zero Halogen Jacket High performance design Individual foil pairs with overall braid screen Category7A Performance to 1000 MHz 23 AWG conductor - solid bare copper cable PVC, LSZH and PE options CATEGORY 7A/7 CABLING SOLUTIONS Transmission performance (20 O C, 100M) Frequency Insertion Loss NEXT PSNEXT ACR-F PSACR-F Return Loss ACR PSACR (MHz) (db) (db) (db) (db) (db) (db) (db) (db) Nor. Typ. Nor. Typ. Nor. Typ. Nor. Typ. Nor. Typ. Nor. Typ. Typ. Typ

7 CATEGORY 7A/7 CABLING SOLUTIONS Cable Category 7 S/FTP 4Pairs LSZH/PVC Standards: ISO/IEC 11801:2011 (Ed. 2.2) IEC :2009 (Ed. 2.0) EN :2011 EN :2007 including amendment A1:2010 EN :2003 IEC [1,2]:2004 IEC [1,2] IEC [1,2] REACH / SvHC Compliant regulation (EC) No. 1907/2006 Low Smoke Zero Halogen Jacket High performance design Individual foil pairs with overall braid screen Category7 Performance to 1000 MHz 23 AWG conductor - solid bare copper cable PVC, LSZH and PE options CATEGORY 7A/7 CABLING SOLUTIONS Transmission performance (20 O C, 100M) Frequency Insertion Loss NEXT PSNEXT ACR-F PSACR-F Return Loss ACR PSACR (MHz) (db) (db) (db) (db) (db) (db) (db) (db) Nor. Typ. Nor. Typ. Nor. Typ. Nor. Typ. Nor. Typ. Nor. Typ. Typ. Typ

8 Category 6A Cabling Solutions 10 Gigabit Ethernet is nowadays viable solution for destinations with very high data traffic concentration like data center, server farms, MAN's and backbones. OPTiLite CATEGORY 6A CABLING SOLUTIONS... Need of 10 Gigabit Service 10 Gigabit Ethernet is the current viable solution for destinations with very high data traffic concentration, such as like data centers, server farms, WAN's and backbones. 10 Gigabit Service Requirement Applications such as high resolution digital videos, medical imaging, digital animation, CAD/CAM & high speed data storage also require the quality of service (QoS) inherent in 10 Gigabit Ethernet. IP-based services such as VoIP and video will require extended bandwidth. Greater bandwidth is also required as voice, data and video networks are coming into structured cabling systems, as is already the case for today's more advanced security systems. 10 Gigabit Standard In 2002 the IEEE already ratified a 10 Gigabit Ethernet standard for a full duplex fiber technology. Considering the worldwide market need, the technology's potential and the economies offered by copper cabling systems, both IEEE and TIA/EIA have ratified the new standard IEEE 802.3an TM Category 6A in the summer of Request for 10 Gigabit Systems Based on past experience with the ratification of first 100 Mb/s and later on 1 GB/s as the recognised standards, we expect a potential for 10G structured cabling systems in the mass market. Bandwidth will be the key issue for many applications in the near future, so it will be important to invest in future-proof 10G-enabled twisted pair structured cabling solutions. OPTiLite 10G Category 6A cabling solutions provides transmission performance which exceed the industry standards for Category 6 parameters and support the operation of 10GBASE-T over 100 meters. 10G Category 6A cabling solutions are qualified for frequencies up to 500 MHz and deliver guaranteed applications. Features 1. Performance conforms to TIA/EIA 568-C.2, ISO/IEC 11801:2002 Ed2.0 & Amendment 1 draft, TIA-TSB-155 draft and EN , IEEE 802.3an Category 6A specifications. 2. Supports T568 A&B Wiring & Easy installation. 3. Offers a total solution for a 10G Category 6A Network Cabling System. Cable Category 6A S/FTP 4 Pairs PVC/LSZH Cable Category 6A F/FTP 4 Pairs PVC/LSZH Cable Category 6A U/UTP 4 Pairs LSZH/PVC Cable Category 6A U/FTP 4 Pairs PVC/LSZH Cable Patch Panel Category 6A 90 o Shielded Patch Panel with Back Cover Category 6A 180 o Unshielded Patch Panel Modular Patch Panel Category 6A Screened High Density RJ45 Patch Panel Keystone Jack Category 6A 180 o Zinc-casted Shielded Keystone Jack, Toll-Free Category 6A 180 o Unshielded Keystone Jack, Toll-Free Screened & Unscreened Keystone Jack Category 6A Shielded and Unshielded Keystone Jacks, Punch Down Type Patch Cord Category 6A Unshielded Twisted Pair (UTP) Patch Cords Category 6A S/FTP Shielded LSZH/PVC Patch Cords

9 ETL Approval CAT 6A

10 CATEGORY 6A CABLING SOLUTIONS Cable Category 6A S/FTP 4 Pairs PVC/LSZH Cable OPTiLite Category 6A S/FTP PVC cables are designed to deliver a robust standards-based performance, ensuring optimum bandwidth for today s high speed network applications. The cable is designed to support horizontal networking applications over distances up to 100 meters. Cable performance is routinely verified by the independent testing laboratory ETL as part of an ongoing maintenance programme. Our Category 6A S/FTP PVC cable exceeds the minimum specified performance for Category 6A S/FTP cables. 23 AWG conductor - solid bare copper cable PVC, LSZH and PE options Supplied in 305m boxes or 500 reels Printed metre marks Applicable Standards: Support all class EA applications as defined within ISO/IEC (2nd Edition): 2010 such as 100GBASE-T (Gigabit Ethernet), 2G FCBASE-T, 4G FCBASE-T and 1000BASE-T (Gigabit Ethernet). Fire Performance: IEC IEC IEC Transmission Performance (20OC, 100M) Frequency Attenuation Return Loss NEXT PS-NEXT ELFEXT PS-ELFEXT Propagation Delay (MHz) (< db) (> db) (> db) (> db) (> db) (> db) (< ns) Cable Category 6A F/FTP 4 Pairs PVC/LSZH Cable OPTiLite Category 6A F/FTP PVC cable is designed to deliver robust standards based performance ensuring optimum bandwidth for today s high speed network applications. The cable is designed to support horizontal networking applications over distances up to 100 metres. Our category 6A F/FTP PVC cable exceeds the minimum specified performance for category 6A F/FTP cables. 23 AWG conductor - solid bare copper PVC, LSZH and PE options Supplied in 305m boxes or 500 reels Printed metre marks Applicable Standards: Support all class EA applications as defined within ISO/IEC (2nd Edition): 2010 such as 100GBASE-T (Gigabit Ethernet), 2G FCBASE-T, 4G FCBASE-T and 1000BASE-T (Gigabit Ethernet). Standards Compliance: ANSI/TIA 568-C.2 EN IEC Transmission EN performance (20OC, 100M) Frequency Attenuation Return Loss NEXT PS-NEXT ELFEXT PS-ELFEXT Propagation Delay (MHz) (< db) (> db) (> db) (> db) (> db) (> db) (< ns) CATEGORY 6A CABLING SOLUTIONS

11 CATEGORY 6A CABLING SOLUTIONS Cable Category 6A U/UTP 4 Pairs LSZH/PVC Cable OPTiLite Category 6A cables and associated connectors take the performance capabilities of copper infrastructure to new levels. Designed to the current ISO EN and TIA standards for Class EA / Category 6A performance, these products are intended to deliver reliable, high network performance over permanent link distances of up to 90 metres and channels up to 100m. Supplied on 305 metre reel in a box, each cable has a print legend identifying the specification, part code and sequential metre marking which counts down from 305 metres to 1 metre, on each drum to reduce waste. U/UTP CAT6A-4P- LSZH component compliant Lightweight, compact round design Conventional unshielded construction Specified to 500MHz Standards Compliance: ISO/IEC11801 IEC [1,2]:2004 IEC [1,2] IEC [1,2] Transmission Performance (20OC, 100M) Application: 10G BASE-T Ethernet 1000BASE-TX (Gigabit Ethernet) 1000BASE-T (Gigabit Ethernet) 100BASE-TX Fast Ethernet 10BASE-T Ethernet Temperature Range 10 C to +60 C Cable Category 6A U/FTP 4 Pairs PVC/LSZH Cable OPTiLite Category 6A U/FTP PVC cable is designed to deliver robust standards based performance ensuring optimum bandwidth for today s high speed network applications. The cable is designed to support horizontal networking applications over distances up to 100 metres. Our category 6A U/FTP PVC cable exceeds the minimum specified performance for category 6A U/FTP cables. 23 AWG conductor - solid bare copper cable PVC, LSZH and PE options Supplied in 305m boxes or 500 reels Printed metre marks Applicable Standards: Support all class EA applications as defined within ISO/IEC (2nd Edition): 2010 such as 100GBASE-T (Gigabit Ethernet), 2G FCBASE-T, 4G FCBASE-T and 1000BASE-T (Gigabit Ethernet). Transmission performance (20OC, 100M) CATEGORY 6A CABLING SOLUTIONS Frequency Attenuation Return Loss NEXT PS-NEXT ELFEXT PS-ELFEXT Propagation Delay (MHz) (< db) (> db) (> db) (> db) (> db) (> db) (< ns) Frequency Attenuation Return Loss NEXT PS-NEXT ELFEXT PS-ELFEXT Propagation Delay (MHz) (< db) (> db) (> db) (> db) (> db) (> db) (< ns)

12 CATEGORY 6A CABLING SOLUTIONS Patch Panel Category 6A 90 o Shielded Patch Panel with Back Cover OPTiLite Category 6A patch panels exceed the transmission line performance requirements of IEC and TIA for class EA/ Category 6A systems. The panels are designed for mechanical and electrical reliability, using quality materials and processes to deliver a panel solution which delivers a consistently high level of system performance. Each Category 6A patch panel complies with the requirements of ISO/IEC (2nd Edition): 2010 and supports all applications designed for class EA/Category 6A applications, including 10GBASE-T (10 Gigabit Ethernet), 2G FCBASE-T, 4G FCBASE-T and 1000BASE-T (Gigabit Ethernet). Patch Panel Category 6A 180 o Unshielded Patch Panel OPTiLite Category 6A Unshielded Twisted Pair (UTP) tool free patch panels conform to class EA performance. These panels offer termination using the latest in tool free keystone jack technology. The use of an insertion tool is not required when terminating these panels. All 8 wires can be loaded and terminated simultaneously, drastically reducing installation time. Available in 1U 24 port format, panels are supplied fully loaded with rear management bars and fixings. CATEGORY 6A CABLING SOLUTIONS 19" rack mountable 24 ports in 1U space 8 - port RJ45 modules Finger screw - easy open screen cover Universal wiring blocks for easy termination Right-angled wiring block orientation for easier installation Colour coded wiring blocks for easy cable lacing Integral rear cable management Durability: * Socket Contacts: 750 plug insertion cycles minimum * Wiring block: 25 termination cycles minimum Earthing kit and cage nuts included as standard Part of the 25 year OPTiFab warranty programme Conformity: Category 6A Electrically compliant beyond 500MHz Supports TIA 568A & B wiring configurations REACH / SvHC compliant regulation (EC) No. 1907/2006 Application: Class EA/category 6A standards compliant Independent third party verified performance Terminates 22AWG to 26AWG cables 4 removable modules simplify installation and maintenance work RJ45 24 port fully loaded 1U Panel Saves valuable installation time Supplied with fixings Loaded with 180 tool free keystone jacks 19 rack mountable Rear cable management bar included Conformity: Category 6A Electrically compliant beyond 500MHz Supports TIA 568A & B wiring configurations REACH / SvHC compliant regulation (EC) No. 1907/2006

13 CATEGORY 6A CABLING SOLUTIONS Modular Patch Panel Category 6A Shielded High Density RJ45 Patch Panel OPTiLite Category 6A "High Density" patch panels exceed the transmission line performance requirements of IEC and TIA for class EA/Category 6A systems. These are real cabinet space saving products designed for mechanical and electrical performance reliability. The "High Density" panel delivers a consistently high level of systems performance whilst halving the cabinet space required in high density installations. Each Category 6A "High Density" patch panel complies with the requirements of ISO/IEC (2nd Edition): 2010 requirements and support all applications designed for Class EA/Category 6A applications, such as 10GBASE-T (10 Gigabit Ethernet), 2G FCBASE-T, 4G FCBASE-T and 1000BASE-T (Gigabit Ethernet). Keystone Jack Category 6A 180 o Zinc-Casted Shielded Keystone Jack Toll-Free OPTiLite Category 6A 180o Zinc-Casted Shielded Keystone Jack Tool-Free RJ45 termination socket is suitable for mounting in a range of housings from patch panels, faceplates and shutters to sub floor boxes and work area distribution enclosures. The socket itself is housed in a high quality zinc die cast housing, which opens the rear in a butterfly manner to reveal the IDC termination points. Once the cable conductors to be terminated are fed into a management cap, the process is completed by snapping the butterfly wings together with minimal, but firm pressure. A cable tie may be added to secure the cable or the same fixing may be used to provide individual bonding of the jack. Small form RJ45 footprint design IDC punch down 180 termination Supports 10 Gigabit Ethernet 360 Shielding protects against alien crosstalk Suitable for patch panel and faceplate mounting 360 Screen die cast housing CATEGORY 6A CABLING SOLUTIONS Applications: Conformity: Class EA/Category 6A standards compliant Electrically compliant beyond 500MHz Independent third party verified performance Supports TIA 568A & B wiring configurations Terminates 22AWG to 26AWG cables REACH / SvHC compliant regulation (EC) No. 1907/ " rack mountable 48 ports in 1U space 8 - port RJ45 modules Finger screw - easy open screen cover Universal wiring blocks for easy termination Right-angled wiring block orientation for easier installation Colour coded wiring blocks for easy cable lacing with integral rear cable management Durability: Socket Contacts: 750 plug insertion cycles minimum, wiring block: 25 termination cycles minimum Earthing kit and cage nuts included as standard Technical Specifications: Housing Material - PC UL94V-0 IDC Material - Phosphor Bronze Stamp Pin 0.35mm Contact Material - Phosphor Bronze + Gold Plating 0.50mm RJ45 Jack Life - Min 750 Insertions IDC Life - Min 250 Terminations Conformity: ISO/IEC : 2002 ANSI/EIA/TIA 568B.2 : 2002 This product conforms to RoHS2 material requirements Typical Applications: IEEE BASE T Gigabit Ethernet Digital and analogue video IEEE802.3an 10GBASE T 10 Gigabit Ethernet 1.2/2.4Gbs ATM Applications: Supports Category 6A networks running up to 500 MHz applications Ideal for high density installations 1.2/2.4Gbs ATM

14 CATEGORY 6A CABLING SOLUTIONS Keystone Jack Category 6A 180 o Unshielded Keystone Jack Toll-Free OPTiLite Category 6A Tool-Free RJ45 keystone jacks exceed the transmission line performance requirements of IEC and TIA for class EA/category 6A systems. The jacks have been designed for mechanical and electrical reliability, using quality materials, to deliver a jack solution that minimises the time required by the installer to complete each termination. Shielded & unshielded versions available Repetitive tool-free terminations Colour coded stuffer-cap for easy cable lacing Keyed stuffer-cap for reliable termination Low clam action insertion force assists tool-free termination (LSA & 110 punch-down tools can also be used to affect termination) Integral cable strain relief Durability: * Jack contacts: 750 plug insertion cycles minimum * Wiring block: 25 termination cycles minimum Fits all keystone style face plates and floor boxes Suitable for modular patch panel installation Conformity: Category 6A Electrically compliant through 250MHz Supports TIA 568 A & B wiring configurations REACH / SvHC compliant regulation (EC) No. 1907/2006 Shielded & Unshielded Keystone Jack Category 6A Shielded and Unshielded keystone Jacks - Punch Down Type OPTiLite Category 6A Shielded and Unshielded Keystone Jacks, Punch Down Type conform to class EA performance. They follow the industry standard keystone jack footprint and the small design makes them ideal for high density applications. Each keystone jack is supplied with a wiring diagram and conductor protection cap and is available in black or white variants. It features a compact design with punching sequence direction marks on the side of the keystone jack. Small form RJ45 footprint design IDC punch down 110 & LSA Tools Compatible 180 termination Supports 10 Gigabit Ethernet Available in black/white Wiring diagram and conductor cap supplied Supplied in boxes of 50pcs Suitable for patch panel and faceplate mounting Typical Applications: IEEE BASE T Gigabit Ethernet Digital and analogue video with 1.2/2.4Gbs ATM IEEE802.3an 10GBASE T 10 Gigabit Ethernet Conformity: Category 6A ISO/IEC : 2002 ANSI/EIA/TIA 568B.2 : 2002 Conforms to RoHS2 material requirements Unshielded CATEGORY 6A CABLING SOLUTIONS Application: IEEE BASE T Gigabit Ethernet Shielded Digital and analogue video IEEE802.3an 10GBASE T 10 Gigabit Ethernet 1.2/2.4Gbs ATM Supports Category 6A networks running up to 500 MHz applications 10GBase-T

15 CATEGORY 6A CABLING SOLUTIONS Patch Cord Category 6A Unshielded Twisted Pair (UTP) Patch Cords OPTiLite Category 6A UTP patch cords conform to Class EA standards. Our patch cords are made to the highest standards, using only quality stranded cable, giving them the best in flexibility, plus top grade 50μ gold plated RJ45 connector plugs for high quality connections. This combination makes for outstanding performance and reduced degradation. All patch cords are produced with an injection moulded boot with an easy depression latch cover. Available across 8 colours, 6 standard lengths and in PVC or LSZH jacket varieties. For best performance, we recommend these as part of a full OPTiLite Category 6A system. Quality 24 AWG stranded (flexible) cable High grade 50μ gold plated RJ45 connector Injection moulded boot for improved strain relief Soft latch-cover design for easy depression U/FTP Cable PVC/LSOH Cable Sheath Applications: Supports Category 6A, 6 and 5E networks running up to 500 MHz applications Backwards compatible with Category 6 distribution systems Conformity: Category 6A ISO/IEC : 2002 ANSI/EIA/TIA 568B.2 : 2002 Product conforms to RoHS2 material requirements Patch Cord Category 6A S/FTP Shielded LSZH/PVC Patch Cords OPTiLite Category 6A S/FTP shielded patch cord range exceeds the transmission line performance requirements of IEC and TIA for CLASS EA/Category 6A systems. The patch cords are designed for mechanical and electrical reliability, using quality materials and processes, to provide a patch cord solution which delivers a consistent high level of systems performance whilst incorporating design features that allow a one style fits all patchcord application. Each Category 6A patch cords are manufactured and tested in accordance with IEC and comply with the requirements of ISO/IEC (2nd Edition): 2010 and support all applications designed for CLASS EA/Category 6Aapplications such as ATM 1200, 1000BASE-T (Gigabit Ethernet) 1G FCBASE-T and 10G BASE-T (10G Ethernet). Physical Construction Conductor Insulation Jacket Type - Stranded bare copper Type - HDPE Type - PVC/LSZH Diameter - 7x0.145 ± 0.005mm Diameter ± 0.05mm Color - Optional AWG - 26 Applications: 10 Gigabit Ethernet 1.2 Gbit ATM Other CAT6A applications Thickness ± 0.05mm Diameter ± 0.5mm CATEGORY 6A CABLING SOLUTIONS Voltage: 150V Current: 1.5A Dielectric Withstanding voltage: 1000V RMS Operating temperature: -20 o C to 60 o C Electrically compliant beyond 500MHz LSZH/PVC cable Low profile moulded strain relief boot for use with blade servers Screened category 6A RJ45 plug Integral anti-snag latch as standard 8 standard colors 7 standard lengths (1, 2, 3, 5, 10, 15 & 20) M Other lengths and colors available*

16 Category 6 Cabling Solutions With over 16 years experience and expertise in products design & development, OPTiFab has built advanced systems both in high tech develop and research center & complete structural quality assurance lab and team. With team approach, all components and the cabling solutions definitely will be your first choice and reliable selection. OPTiLite CATEGORY 6 CABLING SOLUTIONS Solutions and Components The Category 6 solution is currently the most popular in structural cabling. OPTiFab has been a high quality resource in the worldwide marketplace since this has become the trend. With a comprehensive product range, we supply components: communication cables, keystone jacks, compact outlets, patch panels, patch cables, etc., with a complete system warranty. All of these products also have independent third party verified performance. With continuous systemic product upgrades, we ensure you benefit in both product quality and price. Our Quality Guarantee To build a complete high level channel in the project, the precondition is to make sure each component with compatible resistance, thus, the best solution is to use the same brand products or single component with excellent performance. OPTiLite offers you complete Category 6 system solutions which fulfill these requirements, also with the internal specific definition and qualification procedure for each single component is right on the purpose to ease the installation with good and convincible field test results. Become a 25 Year Warranty Partner The OPTiFab Cabling System Warranty provides a 25 year product and applications assurance of compliance with the industry performance standard appropriate to the class of cabling installed. The warranty may be applied for by an accredited OPTiFab Partner who has designed, supplied and installed the said system. Cable Category 6 F/UTP 4Pairs PVC/LSZH Cable Category 6 SF/UTP 4Pairs PVC/LSZH Cable Category 6 U/UTP 4Pairs LSZH Cable Category 6 U/UTP 4Pairs PVC Cable Patch Panel Category 6 UTP Patch Panel, PCB Type 0.5U/1U 24Port Category 6 Unshielded Twisted Pair (UTP) Patch Panel PCB Type 24/48 Port Category 6 Shielded Twisted Pair (STP) Patch Panels Category o Unshielded Patch Panel RJ45 Module Category 6 Unshielded (UTP) Module Low Profile Patch Cord Category 6 Unshielded PVC/LSZH Patch Cords Keystone Jack Category 6 Unshielded Twisted Pair (UTP) Keystone Jack Category 6 Unshielded Twisted Pair (U/UTP) Keystone Jack -Toolless Project Support Our sales team will share you marketing strategy and almost world project information, which will help you to win the bid. Our international purchasing team will source you the special products to make your supply chain easy and simple. 3. Offers total solution of 10G Category 6A Network Cabling System.

17 ETL Approval CAT 6

18 CATEGORY 6 CABLING SOLUTIONS Cable Category 6 F/UTP 4Pairs PVC/LSZH Cable OPTiLite Category 6 Foiled Twisted Pair (FTP) cable is produced using 4x2x23 AWG copper to a Class E standard. An aluminium tape is used to shield all 4 pairs; this gives a shielded protection against external interference, such as EMI. Capable of supporting protocols up to 250 MHz for horizontal and backbone installations; token ring (IEEE 805.5). 23 AWG conductor - solid bare copper cable PVC, LSZH and PE options Supplied in 305 meter boxes or 500 meter reels Printed metre marks Conformity: ANSI/EIA/TIA 568B.2 : 2002 ISO/IEC : 2002 ETL approved Product conforms to RoHS2 material requirements REACH 00 Cable Category 6 SF/UTP 4Pairs PVC/LSZH Cable OPTiLite Category 6 Shielded & Foiled Twisted Pair (SFTP) copper cable is a 23 American Wire Gauge (AWG) used ideally for Gigabit Ethernet, multimedia, video, voice & data applications. Choice of PVC or LSZH outer jackets. All cables meet or exceed CAT6 TIA/EIA 568 B.2, ISO/IEC requirements. An ultra-smooth jacket makes this cable easy to pull, even in tight spaces. Performance characterized to 600 MHz 23 AWG conductor - solid bare copper cable Twisted pairs are brightly coloured and distinguished at a glance The cross frameworks are stripped to match corresponding coloured pairs Supplied in 305 meter boxes or 500 meter reels CATEGORY 6 CABLING SOLUTIONS Transmission Performance (20OC, 100M) Applications: 10 Base T (IEEE 802.3) 100 Base T (IEEE 802.3U) 1000 Base T (IEEE 802.3ab) 100 VG any LAN (IEEE ) Applicable Standards: EIA/TIA 568-C.2, EN 50173, EN 52288, IEC 11801, IEC Transmission performance (20OC, 100M) Frequency Attenuation Return Loss NEXT PS-NEXT ELFEXT PS-ELFEXT Propagation Delay (MHz) (< db) (> db) (> db) (> db) (> db) (> db) (< ns) Frequency Attenuation Return Loss NEXT PS-NEXT ELFEXT PS-ELFEXT Propagation Delay (MHz) (< db) (> db) (> db) (> db) (> db) (> db) (< ns)

19 CATEGORY 6 CABLING SOLUTIONS Cable Category 6 U/UTP 4Pairs LSZH Cable OPTiLite Category 6 U/UTP LSZH cable is designed to deliver a robust standards-based performance, ensuring optimum bandwidth for today s high speed network applications. The cable is designed to support horizontal networking applications over distances up to 100 metres. Our Category 6 U/UTP LSZH cable exceeds the minimum specified performance for Category 6 U/UTP cables and supports all class E applications as defined within ISO/IEC (2nd Edition): 2010 such as 1000BASE-T (Gigabit Ethernet), ATM-155, 100BASE-Tx, Token Ring 100Mbs-1, and 1G FCBASE-T. 4 twisted pair cables 100 ohms LSZH sleeve: zero halogen EIA/TIA colour code Length 305m Supplied on reel Weight 16 kg Blue Applicable Standards: ANSI/TIA 568-C.2 EN IEC EN Fire Performance: IEC IEC IEC Cable Category 6 U/UTP 4Pairs PVC Cable OPTiLite Category 6 U/UTP PVC cable is designed to deliver a robust standards-based performance, ensuring optimum bandwidth for today s high speed network applications. The cable is designed to support horizontal networking applications over distances up to 100 metres. Cable performance is routinely verified by independent third party laboratories, as part of an ongoing maintenance programme. Our Category 6 U/UTP PVC cable exceeds the minimum specified performance for Category 6 U/UTP cables and supports all Class E applications as defined within ISO/IEC (2nd Edition): 2010, such as 1000BASE-T (Gigabit Ethernet), ATM-155, 100BASE-Tx, Token Ring 100Mbs-1, and 1G FCBASE-T. Performance characterized to 600 MHz 23 AWG conductor - solid bare copper cable Twisted pairs are brightly coloured and distinguished at a glance The cross frameworks are stripped to match corresponding coloured pairs Supplied in 305 meter boxes or 500 meter reels Applicable Standards: EIA/TIA 568-C.2, EN 50173, EN 52288, IEC 11801, IEC CATEGORY 6 CABLING SOLUTIONS Transmission Performance (20OC, 100M) Transmission performance (20OC, 100M) Frequency Attenuation Return Loss NEXT PS-NEXT ELFEXT PS-ELFEXT Propagation Delay (MHz) (< db) (> db) (> db) (> db) (> db) (> db) (< ns) Frequency Attenuation Return Loss NEXT PS-NEXT ELFEXT PS-ELFEXT Propagation Delay (MHz) (< db) (> db) (> db) (> db) (> db) (> db) (< ns)

20 CATEGORY 6 CABLING SOLUTIONS Patch Panel Category 6 UTP Patch Panel - PCB Type 0.5U/1U 24Port OPTiLite s Category 6 Printed Circuit Board (PCB) Unshielded Twisted Pair (UTP) patch panels are available in 0.5U & 1U height versions to accommodate installation requirements. These panels conform to Class E performance. Backwards compatible with Category 5E distribution systems. The PCB is fully sealed for extra protection and has in-line IDC blocks. A wiring diagram assists termination to either 568A or B wiring standards. Termination can be made using 110 & LSA compatible tooling. All panels are supplied with rear cable management bars and fixings. RJ45 24 port fully loaded 1U panel 19 rack mountable Krone style IDC Rear cable management bar included Supplied with fixings Ports numerically identified Electric Parameters: Insulation Resistance: >500 ohms Contact resistance: <20m ohms Dielectric Strength: DC1000V (AC700V) Return loss: 250MHz, >8.0dB Insertion loss: 250 MHz, <35.9dB Next loss: 250 MHz, >33.1dB Attenuation: <555ns Conformity: Category 6 EN : 2002 EIA/TIA 568A/B Wiring standard ISO/IEC : 2002 ANSI/EIA/TIA 568B.2 : 2002 Product conforms to RoHS2 material requirements Application: 0.5U (24P) Supports Category 6 (Class E) networks running up to 250 MHz applications Backwards compatible with Category 5E distribution systems Patch Panel Category 6 Unshielded Twisted Pair (UTP) Patch Panel - PCB Type 24/48 Port OPTiLite s Category 6 Printed Circuit Board (PCB) Unshielded Twisted Pair (UTP) patch panels conform to Class E performance. Backwards compatible with Category 5E distribution systems. The PCB is fully sealed for extra protection and has in-line IDC blocks. A wiring diagram assists termination to either 568A or B wiring standards. Available in 1U 24 port or 2U 48 port. All panels are supplied with rear cable management bars and fixings. 19 rack mountable Ports numerically identified RJ45 24 port 1U or 48 port 2U options 110 style IDC punch down Removable label area Supplied with fixings Rear cable management bar included Conformity: Category 6 EN : 2002 EIA/TIA 568A/B Wiring standard ISO/IEC : 2002 ANSI/EIA/TIA 568B.2 : 2002 Product conforms to RoHS2 material requirements CATEGORY 6 CABLING SOLUTIONS Technical Specifications: Housing Material - PC UL94V-0 Panel Frame - Carbon Steel Frame, Plastic Powder Clad IDC Material - Phosphor Bronze Stamp Pin 0.35mm Contact Material - Phosphor Bronze + Gold Plating 0.50mm RJ45 Jack Life - Min 750 Insertions IDC Life - Min 250 Terminations 1U (24P)

21 CATEGORY 6 CABLING SOLUTIONS Patch Panel Category 6 Shielded Twisted Pair (STP) Patch Panels OPTiLite s Category 6 Shielded Twisted Pair (STP) patch panels conform to class E performance and are backwards compatible with Category 5Edistribution systems. Each shielded panel is produced using a right angled (90 ) frame design for flat termination onto the IDC blocks. This ensures termination, grounding and general management is quick and easy when working with Category 6 shielded cables. Cable grounding is achieved by using the shielding clamps located to the rear of the integral cable management. Each port has its own 8 pin IDC block. The panel includes an overall sliding cover, which gives extra screening against EMI and protects the terminations. 19 rack mountable Ports numerically identified RJ45 24 port 1U Right angle (90 ) design Supplied with fixings and earthing wire Integral cable management Grounding clamps Conformity: Category 6 EN : 2002 EIA/TIA 568A/B wiring standard ISO/IEC : 2002 ANSI/EIA/TIA 568B.2 : 2002 Product conforms to RoHS2 material requirements Application: Supports Category 6 (Class E) networks running up to 250 MHz applications. Backwards compatible with Category 5E distribution systems. Technical Specifications: Housing Material - PC UL94V-0 Panel Frame Zinc Plating, Powder Coating Contact Material - PC UL94V-0 Contact: Phosphor Bronze + Nickel Plating IDC Material - Phosphor Bronze Stamp Pin 0.35mm RJ45 Jack Life - Min 750 Insertions IDC Life - Min 200 Terminations Patch Panel Category o Unshielded Patch Panel Tool-Free OPTiLite Category o Unshielded Twisted Pair (UTP) Tool-Free patch panels conform to Class EA performance. These panels offer termination using the latest in tool-free keystone jack technology. The use of an insertion tool is not required when terminating these panels. All 8 wires can be loaded and terminated simultaneously, drastically reducing installation time. Available in 1U 24 port format, panels are supplied fully loaded with rear management bars and fixing. 4 removable modules simplify installation and maintenance work RJ45 24 port fully loaded 1U Panel Saves valuable installation time Supplied with fixings Loaded with 180 tool free keystone jacks 19 rack mountable Rear cable management bar included Conformity: Category 6 EN : 2002 EIA/TIA 568A/B Wiring Standard ISO/IEC : 2002 ANSI/EIA/TIA 568B.2 : 2002 Product conforms to RoHS2 material requirements CATEGORY 6 CABLING SOLUTIONS

22 CATEGORY 6 CABLING SOLUTIONS RJ45 Module Category 6 Unshielded (UTP) Module Low Profile OPTiLite Category 6 Low Profile RJ45 modules are presented in the standard Euromod size. Each shuttered module is supplied with a slide label field and space above; this allows the use of self-adhesive or further labelling if required. Termination can be made using LSA compatible tooling. The low profile design makes this module ideal for installations in floor box environments or shallow dado trunking. Choice of Colours One Piece, Snap in Design Low Profile Design 25 x 50mm Euromod Size Supports Gigabit Ethernet Built in Slide Label System LSA Style Termination Blocks Typical Applications: 10Base T Ethernet 100BASE TX Fast Ethernet 1000BASE T Gigabit Ethernet 155 Mbps ATM 622 Mbps ATM Token Ring Application Class E/Category 6 standards compliant Patch Cord Category 6 Unshielded PVC/LSZH Patch Cords OPTiLite Category 6 UTP patch cords are manufactured and tested to ISO & EN requirements for patch cord assemblies. Using these OPTiFab patch cords will ensure the installed cabling system is compliant with TIA/EIA, ISO & EN channel specification requirements and will provide optimum performance levels for your OPTiFab Category 6 cabling. A choice of lengths and colours are available, colour coded slimline moulded boots (suitable for use in high density routers or switch blades) are standard and each cable is supplied individually bagged. Each cable has a low smoke zero halogen outer jacket as standard and is ideal for use in office and data centre environments. Physical: Conductor Material: bare copper Diameter: 7 X 0.18 ± MM AWG: 25 Insulation Material: HDPE Diameter: 0.98 ± 0.06 MM Out Jacket Material: PVC/LSZH Color: optional Thickness: 0.8MM Diameter: 6.1 ± 1.0 MM Environmental: Operating temperature: -20 O C to 65 O C Electrical: Voltage: 150v Current: 1.5A Dielectric withstanding voltage: 1000V RMS Plug: Material: PC Contact Material: Phosphor Bronze Contact Planting: Gold Contact Resistance: 20mΩ, Operating Life: 750s Standard: ISO/IEC IEC EN EN TIA/EIA 568-C.2 Application: 100 Base - T4 100 Base -TX 100VG Any LAN 1000 Base - T 100 Base - TX 155Mbps ATM 622Mbps ATM[3] CATEGORY 6 CABLING SOLUTIONS

23 CATEGORY 6 CABLING SOLUTIONS Keystone Jack Category 6 Shielded and Unshielded Keystone Jack-Tool-Free OPTiLite s Category 6 Unscreened Keystone Jack is an independently verified tool-less RJ45 termination socket suitable for mounting in range of housings from patch panels, faceplates and shutters to sub floor boxes and work area distribution enclosures. The socket itself is housed in a high quality ABS plastic housing, which opens at the rear in a butterfly manner to reveal the IDC termination points. Once the cable conductors to be terminated are fed into a wire cap, the process is completed by snapping the butterfly wings together with minimal, but firm pressure. A choice of patch panel frames with either 16 or 24 port density in both black and chrome are available. Supports Gigabit Ethernet Suitable for patch panel and faceplate mounting Suitable for installation in 27mm deep back box with bevelled faceplate LSA/110 Punch down Termination Independently Verified Lifetime Product Warranty Metalised cap protects against alien crosstalk Typical Applications: 1000BASE T Gigabit Ethernet 100BASE TX Fast Ethernet 10 Base T Ethernet 622Mbps ATM 155Mbps ATM Conformity: ISO/IEC : 2002 ANSI/EIA/TIA 568B.2 : 2002 Product conforms to RoHS2 material requirements Unshielded Keystone Jack Category 6 Shielded and Unshielded Keystone Jacks - Punch Down Type OPTiLite s Category 6 shielded and unshielded punch down type keystone jacks conform to Class E performance. They follow the industry standard keystone jack footprint and the small design makes them ideal for high density applications. Each keystone jack is available with a wiring diagram and conductor protection cap and they can be supplied in black or white variants. They feature a compact design, with punching sequence direction marks on the side of the keystone jack. Small form RJ45 footprint design IDC punch down 110 & LSA Tools Compatible 180 termination Supports 10 Gigabit Ethernet Available in black/white Wiring diagram and conductor cap supplied Supplied in boxes of 50pcs Suitable for patch panel and faceplate mounting Typical Applications: IEEE BASE T Gigabit Ethernet Digital and analogue video with 1.2/2.4Gbs ATM IEEE802.3an 10GBASE T 10 Gigabit Ethernet Conformity: Category 6 ISO/IEC : 2002 ANSI/EIA/TIA 568B.2 : 2002 Conforms to RoHS2 material requirements Unshielded CATEGORY 6 CABLING SOLUTIONS Application: IEEE BASE T Gigabit Ethernet Digital and analogue video IEEE802.3an 10GBASE T 10 Gigabit Ethernet 1.2/2.4Gbs ATM Supports Category 6A networks running up to 500 MHz applications 10GBase-T Shielded Application: IEEE BASE T Gigabit Ethernet Shielded Digital and analogue video IEEE802.3an 10GBASE T 10 Gigabit Ethernet 1.2/2.4Gbs ATM Supports Category 6A networks running up to 500 MHz applications 10GBase-T

24 OPTiFab s voice product series mainly focuses on traditional voice cabling and includes multi-pair cables suitable for indoor backbone cabling & outdoor campus cabling. The data & voice outlets are designed to be aesthetically pleasing and the RJ45 Category 3 voice & data patch panels, patch cords and installation cables constitute a complete voice cabling solution. OPTiLite Voice & Outlets Product Multi-pair Cable Category 3 Indoor Multi-Pair Cable Patch Panel Category 3 Voice Patch Panel (25 Port) Category 3 Voice Patch Panel (50 Port) Multi-pair Cables OPTiFab mainly supplies Category 3 multi-pair cables (including 5 pairs, 10pairs, 25 pairs, 50 pairs & 100 pairs), both indoor and outdoor gel-filled types, for indoor backbone use and campus cabling application. All multi-pair cables meet or exceed ANSI/TIA/EIA 568A, ISO/IEC 11801, EN specifications. ISDN Patch panels Standard RJ45 jack and 19 1U/2U size, options for both 25 ports and 50 ports, suitable for rack installation. Data & Voice Outlets In addition to cabling solutions, OPTiFab offers various types of faceplates in popular designs for all of your cabling nodes and subscriber outlets.

25 CATEGORY 3 CABLING SOLUTIONS Multi-pair Cable Category 3 Indoor Multi-pair Cable OPTiLite Category 3 U/UTP Cable meets ANSI/TIA-568-C.2 Category 3 component standards. The conductors are 24 AWG copper construction with PE insulation. The copper conductors are twisted in pairs and all pairs are covered by a low smoke zero halogen (LSZH) or flame retardant PVC (CM) jacket. Multi-pair cables are available in 25, 50, and 100-pair construction. 50 pair cables Temperature (60,75,90 ) RoHS/REACH compliant PVC Jacket Flame Test (CMX,CM,CMR) Installation Temperature (-30 ~+50 ) Telephone Voice Wiring 100 BASE-T4 10 Base-T Application: CAT3 U/UTP 50 Pairs Cable PVC Sheath Electrical Characteristics (20 o C): MHz, impedance (Ω) 100±15 Capacitance(nF/100m) max: 6.6 DC Resistance (Ω/100m) max 9.5 NVP 65%, Delay Shew 20ºC(ns/100m) 45 Transmission Performance (20 O C, 100M) Patch Panel Category 3 Voice Patch Panel (25 Port) OPTiLite Category 3 high density voice patch panels offer a cost-effective method for integrating voice circuits into standard structured cabling systems. Available in both 25 and 50 ports on a 1U 19 footprint, they are ideal for maximising rack space. Voice integration into standard structured cabling systems. 19 rack mountable Accepts AWG Supplied with fixings and earthing wire IDC punch down 25 RJ45 ports on 1U footprint Integral cable management and grounding clamps CATEGORY 3 CABLING SOLUTIONS Frequency Attenuation Return Loss NEXT PS-NEXT ELFEXT PS-ELFEXT Propagation Delay (MHz) (< db) (> db) (> db) (> db) (> db) (> db) (< ns) Specification: SP-3214K25-C3 Space saving, high density 1U, 19 inch panel design Termination: Krone IDC IDC contact material : phosphor bronze with tin plating over nickel Contact material : phosphor bronze with gold plating over nickel Panel frame : Black electrostatic powder coated steel Housing material : ABS or PC, UL94-V0

26 CATEGORY 3 CABLING SOLUTIONS Patch Panel Category 3 Voice Patch Panel (50 Port) OPTiLite Category 3 high density voice patch panels offer a cost-effective method for integrating voice circuits into standard structured cabling systems. Available in both 25 and 50 ports on a 1U 19 footprint, ideal for maximising rack space. Voice integration into standard structured cabling systems. Supports Gigabit Ethernet Krone Type Termination Blocks Category 3 compliant Angle: 90 Degree Standards: TIA/EIA-568-A and TIA/EIA-568-B Category 3 req. TIA/EIA TSB-40 ISO/IEC Generic Cabling Standard CENELEC Generic Cabling Standard EN50173 CATEGORY 3 CABLING SOLUTIONS Electrical Materials According to UL 1863 Housing: PC UL94V-0 Current rating: 1.5 Amp Max. IDC: PC UL94V-0, Accept AWG Solid Wire. Voltage rating: 150 Volts PCB: FR4 1.6mm (0.04") thickness, 2 layers Contact resistance: 20 m-ohm Contact: PC Ul94V-0, 0.45mm (0.018") Insulation Resistance: 500M-ohm Diameter Phosphor bronze with 3 u" to 50 u" Dielectric Withstand Voltage: 1000 V AC RMS, 60Hz 1min Gold plating on contact area

27 To complete your professional cabling installation, you will need the necessary accessories to give it that finishing touch; from face plates & adapters to mounting blocks & tie wraps, we've got you covered. OPTiLite Accessories Find prompt, expert support from a OPTiFab professional Are the technological complexities of your infrastructure project making it difficult to complete? Are you stuck troubleshooting an installation? Do you have a technical question which requires specific expertise? We can help. Let us know the type of issue you re facing and where it s happening. We will share the specific customer service or technical support contact information you need to get helpful assistance and prompt resolution. Accessories for CAT 5E/6/6A Accessories for CAT 5E/6/6A UK Style Accessories for CAT 5E/6/6A European Style Other CAT 5E/CAT 6/CAT 6A UTP Tool-free Panel UTP Blank Panels Cable Management CAT 5E, CAT 6 & CAT 6A Newly Designed OEM Test Reports

28 CABLING & ACCESSORIES SOLUTIONS Accessories for CAT 5E/6/6A UK Style Single Gang - 2 position 86x86mm - Box of 10pcs (Bevelled) Angled Module and Jack (1P)86x86mm - Box of 10pcs (Bevelled) Angled Module and Jack (2P)86x86mm - Box of 10pcs (Bevelled) Double Gang - 4 position 86x147mm - Box of 10pcs (Bevelled) Angled Module and Jack 86x147mm - Box of 10pcs (Bevelled) Box of 20pcs Angled Module (Bevelled) Single Blank 50x12.5mm Box of 100pcs (Bevelled) Half Blank 50x25mm Box of 50pcs (Bevelled) Single Gang - 2 position 86x86mm - Box of 10pcs (Flat) Angled module and jack 86x86mm - Box of 10pcs (Flat) Angled module and jack 86x86mm - Box of 10pcs (Flat) Double gang - 4 position 86x147mm - Box of 10pcs (Flat) Angled module and jack 86x147mm - Box of 10pcs (Flat) Box of 20pcs Angled Module (Flat) Single Blank 50x12.5mm Box of 100pcs (Flat) Half Blank 50x25mm Box of 50pcs (Flat) Applications: Supports Category 5E/6/6A (class D) networks running up to 100MHz applications Conformity: Category 5E/6/6A ISO/IEC : 2002 ANSI/EIA/TIA 568B.2 : 2002 This product conforms to RoHS2 material requirements Fully loaded / completed outlets Reduced installation time Wiring diagram and mini cable tie supplied Fixing screws, labelling supplied All loaded faceplates include this style of keystone jack....

29 CABLING & ACCESSORIES SOLUTIONS Accessories for CAT 5E/6/6A European Style Blanks & unloaded angled module. Fits with any UK style faceplates. LJ6C single port flat faceplate. Dimensions: 86 x 86mm LJ6C double port flat faceplate. Dimensions: 86 x 86mm Angled Module. Fits with any LJ6C style faceplates. European style curved faceplate. Comes with unloaded modules in 1 or 2 port versions. European style faceplate. Suitable for installing 1 to 2 ports. 80 x 80mm 1-2 Port Faceplate Technical Specifications (Bevelled Loaded Faceplates): Housing Material - PC UL94V-0 IDC Material - Phosphor Bronze Stamp Pin 0.35mm Contact Material - Phosphor Bronze + Gold Plating 0.50mm RJ45 Jack Life - Min 750 Insertions IDC Life - Min 250 Terminations Back Box for Single Faceplate and Back Box for Double Faceplate. Technical Specifications (Flat Loaded Faceplates): Housing Material - PBT + 15% GF UL94V-0 IDC Material - Phosphor Bronze Stamp Pin 0.35mm Contact Material - Phosphor Bronze + Gold Plating 0.50mm RJ45 Jack Life - Min 750 Insertions IDC Life - Min 250 Terminations...

30 CABLING & ACCESSORIES SOLUTIONS Other CAT 5E/CAT 6/CAT 6A UTP Panel is available UTP Tool-Free Panels Standards Verification: ANSI/TIA-568-C.2 ISO/IEC :2002/Amd.2:2010 YD/T ISO/IEC COMPLIANT RoHS directive 2002/95/EC compliant Application: Ethernet, VoIP, IP-Camera, and the Voice/Data connection point in the Work Area Subsystem/Administration Subsystem/Equipment Room Subsystem of Cabling Systems Category BASE-T Category 6A - 10GBASE-T...

31 CABLING & ACCESSORIES SOLUTIONS All Kinds of UTP Blank Panels UTP Blank Panels Application: Ethernet, VoIP, IP-Camera, and the Voice/Data connection point in the Work Area Subsystem/Administration Subsystem/Equipment Room Subsystem of Cabling Systems Category BASE-T Category 6A - 10GBASE-T Standards Verification: ANSI/TIA-568-C.2 ISO/IEC :2002/Amd.2:2010 YD/T ISO/IEC COMPLIANT RoHS directive 2002/95/EC compliant...

32 CABLING & ACCESSORIES SOLUTIONS Other Accessories Cable Management Standards Verification: ANSI/TIA-568-C.2 ISO/IEC :2002/Amd.2:2010 YD/T ISO/IEC COMPLIANT RoHS directive 2002/95/EC compliant Description: D-ring metallic style (with/without holes; 4/5/6 rings; 14-18mm height; 1U/2U available); Clips metallic style (with cover, 12 /16/24 clips; 1U/2U available); Plastic clips style (with cover 12clips, 1U/2U available); different cable management for your applications. Application: Ethernet, VoIP, IP-Camera, and the Voice/Data connection point in the Work Area Subsystem/Administration Subsystem/Equipment Room Subsystem of Cabling Systems. Technical Specifications: Mechanical - Retention Force: can hold 24pcs-48pcs SFTP 22AWG patch cord weight (on the cabinets) OPERATING TEMPERATURE: -10~60 C OPERATING HUMIDITY: 10%~90%RH STORAGE TEMPERATURE: -40 C TO 68 C Physicals - Metallic cable management: High quality steel plate cover with plastic-powder cladding Plastic Cable Management: High impact flame retardant plastic, UL 94V-0 rated...

33 CABLING & ACCESSORIES SOLUTIONS Newly Designed Products - Coming Soon CAT 6 & CAT 6A Keystone Jacks & Patch Panels Mini Size UTP/FTP Tool-free Keystone Jack serials, left & right open UTP/FTP Tool-free Keystone Jack serials, up & down open Front removable blank patch panel, with Shutter Front removable 90D UTP patch panel

34 Aluminum Front Frame, High quality panel Application: Ethernet, VoIP, IP-Camera, and the Voice/Data connection point in the Work Area Subsystem/Administration Subsystem/Equipment Room Subsystem of Cabling Systems Category BASE-T Category 6A - 10GBASE-T Standards Verification: ANSI/TIA-568-C.2 ISO/IEC :2002/Amd.2:2010 YD/T ISO/IEC COMPLIANT RoHS directive 2002/95/EC compliant...

35 Test Reports CAT 6 & CAT 6A

36 ...

37 OPTiFab International Ltd. +44 (0)