Structured. Copper cabling system CONNECTIVITY & CABLING SYSTEM

Transcription

1 Structured Copper cabling system CONNECTIVITY & CABLING SYSTEM

2 Easy Crimp system p. 3 Patch cords and plugs p. 13 Work outlet p. 21 2

3 easy crimp Easy Crimp system 3

4 :top speed installation TIME SAVING A COMPLETE RANGE OF PRODUCTS RELIABILITY External cap for the termination protection with 360 shield CONNECTION CAP WITH INSERTION KEY AND DUAL T568A/B WIRING LABEL SNAP-IN COMPATIBLE WITH KEYSTONE STANDARD Reusable with easy opening TWO COLOR OPTIONS FOR THE CONNECTOR BODY TO SUIT THE WORK OUTLET 4

5 EASY 0 60 Sec. easy crimp By following the double labeling T568A/B color scheme, insert the pairs in the connection cap holes. The conductors have to be blocked in the appropriate slots. 2. The compulsory insertion key avoid the incorrect positioning of the connection cap inside the jack. With an easy by hand click, or by using the CRIMP tool, the termination crimp is concluded. 3. By using flat blades nippers, cut the conductors surplus jutting out from the connection cover cap. A proper insulation located inside the cap avoid shortcircuits in shielded jacks. 4. By matching the insertion way arrows of the external cap and of the jack, you complete the crimp. In case of shielded jack, a bayonet and a supplied tie assure a 360 cable shield. CERTIFIED Innovation and constant development of products that follow and anticipate the needs of a technological and technical market are accompanied by product certifications issued by independent laboratories such as Delta in Denmark or GHMT in Germany. The BaseLink, 10GLink and HiLink Series are certified according to the most recent international standards and boast top results both for single components and systems. Homologation certificates can be submitted upon request. GUARANTEED Education is the necessary investment required for those who want to grow professionally and thus ensure quality installations and regulatory compliance. Qubix S.p.A. supports its customers right from the pre-sales phase, organizing training courses devoted to the cabling planning, realization and certification. The certificate released after the course allows the authorized installer to guarantee the performance of an installation up to 30 years, provided that it is fully made of products branded C.C.S. Certificato di garanzia Si certifica che il sistema di cablaggio HI LINK installato presso: cliente: INdIrIzzo: è stato installato e collaudato in conformità ai requisiti del Manuale di Certificazione degli Installatori, basato sulle normative CENELEC, ISO/IEC, TIA/EIA inerenti al cablaggio per telecomunicazioni, ed è quindi garantito per un periodo di 30 anni dalla data del rilascio, sulle prestazioni del sistema verificate al momento del collaudo. ditta INStaLLatrIce: INdIrIzzo: autorizzazione N : data di rilascio: N di registrazione: INStaLLatore autorizzato: qubix s.p.a. Certificate No. z2661a-11-e Customer: QUBIX SPA Via Canada 22/a Padova - Italy Test sample(s): Outlet: HI LINK Easy Crimp Cat. 6A die casting shielded keystone jack Part No.: Patchpanel: HI-LINK Easy Crimp Cat. 6A 24-position shielded patch panel Part No.: Data Cable: HI LINK R6A-FF4H23 F/FTP 4x2xAWG 23/1 LSZH Cat.6A Part No.: M Patchcord: HI-LINK RJ45-RJ45 patch cord FTP Cat.6A Part No.: Applied standard(s): ISO/IEC AMD 1 ( ) Results: Up to a bandwidth of 500 MHz the sample meet the Class EA limits of the specified standards and regulations. Class E A Channel, Class EA The test results which were determined in the course of the measurement refer to the submitted specimen. Any future technical modifications of the verified Products are subject to the responsibility of the manufacturer. This Certificate refers to the comprehensive test report, no. P2661a-11-E, from September 22 nd, 2011 and shall only be applicable in conjunction with the test report. Bexbach, September 22 nd, 2011 GHMT AG In der Kolling 13 D Bexbach Phone: +49 (0) / Dirk Wilhelm, engineer Fax: +49 (0) / (Chairman of the Managing Board) info@ghmt.de attestato di installatore autorizzato del sistema di cablaggio strutturato ccs autorizzazione n : rilasciato alla società: tecnico: addì qubix s.p.a. A 5

6 Easy Crimp System Category 5E Jacks General characteristics CAT 5E CCS shielded and unshielded RJ45 jacks for transmission channels of Class D. The Easy Crimp termination system makes the connection fast and easy without the use of tools allowing a considerable time saving during the installation phase. Certified by independent testing laboratories in accordance with CAT 5E (Class D) requirements on the single component, they support Gigabit Ethernet applications (IEEE 802.3ab) and are suitable for POE (IEEE 802.3af). Material Connection Polycarbonate, high-impact, flame-retardant plastic housing, metal coated (only for the shielded version). 8 phosphor bronze contacts plated with 50 µm hard gold. Reusable connection cap with ergonomic slots to facilitate the conductors positioning; IDC insulation displacement for solid or stranded copper conductors of diameter from 22 to 26 AWG; double labeling color scheme indicating the two T568A/B connections, external cap for the termination protection. Installation Keystone universal snap-in for installation on panels, faceplates, adapters and outdoor boxes. Certifications CAT 5E Component Level - Delta technical report N Color White/anthracite-unshielded version Aluminum Grey-shielded version Approvals ISO/IEC 11801:2002 (Ed. 2.0) amend. A1/A2 IEC /3: (Ed. 2.0) EN :2007 amend. A1:2009 included ANSI/TIA-568-C.2:2009 Warranty 20 years on the CCS system Packaging CAT 5E CCS Easy Crimp shielded RJ45 jack 60 pcs CAT 5E CCS Easy Crimp unshielded RJ45 jack - anthracite 60 pcs CAT 5E CCS Easy Crimp unshielded RJ45 jack - white 60 pcs 6

7 Easy Crimp System Category 5E easy crimp Patch panels General characteristics CAT 5E CCS 24-port patch panel, supplied with 24 Easy Crimp shielded or unshielded RJ45 jacks for transmission channels of Class D. The Easy Crimp termination system makes the connection fast and easy without the use of tools allowing a considerable time saving during the installation phase. Certified by independent testing laboratories in accordance with CAT 5E (Class D) requirements on the single component, they support Gigabit Ethernet applications (IEEE 802.3ab) and are suitable for POE (IEEE 802.3af). Certifications CAT 5E Component Level - Delta technical report N Structure Equipment Dimensions Color Metal frame with 24 ports for Keystone Easy Crimp jacks; ABS casing with 8-position covers; mount release lateral screws cover with logos; Jacks layout in two rows; setting for connection to ground. 1 CCS 24-port patch panel; 24 CAT 5E CCS Easy Crimp shielded or unshielded RJ45 jacks; frontal cover for 8/16/24 positions modules; clear plastic label-holder for the personalized numbering; rear cable management; 24 dustprotection caps for the jacks; rack mount screws and nuts, cable ties. 19, 1 Unit Black Approvals Warranty ISO/IEC 11801:2002 (Ed. 2.0) amend. A1/A2 IEC /3: (Ed. 2.0) EN :2007 amend. A1:2009 included ANSI/TIA-568-C.2: years on the CCS system Packaging CCS 24-port patch panel with 24 CAT 5E CCS Easy Crimp shielded RJ45 jacks 1 pc CCS 24-port patch panel with 24 CAT 5E CCS Easy Crimp unshielded RJ45 jacks 1 pc 7

8 Easy Crimp System Category 6A Channel Jacks General characteristics CAT 6A-10G CCS shielded and unshielded RJ45 jacks for transmission channels of Class E A. The Easy Crimp termination system makes the connection fast and easy, without the use of tools allowing a considerable time saving during the installation phase. Certified by independent testing laboratories in accordance with Class E A requirements on the channel link at 500 Mhz and with CAT 6 requirements on the single component, they support 10Gigabit Ethernet applications (IEEE 802.3an) and are suitable for POE+ (IEEE 802.3at). Material Connection Installation Polycarbonate, high-impact, flame-retardant plastic housing, metal coated (only for the shielded version). 8 phosphor bronze contacts plated with 50 µm hard gold. Reusable connection cap with ergonomic slots to facilitate the conductors positioning; IDC insulation displacement for solid or stranded copper conductors of diameter from 22 to 26 AWG; double labeling color scheme indicating the two T568A/B connections, external cap for the termination protection. Keystone universal snap-in for installation on panels, faceplates, adapters and outdoor boxes. Certifications Channel Class E A Delta technical report N CAT 6 Component Level - Delta technical report N Color White/anthracite-unshielded version Aluminum Grey-shielded version Approvals ISO/IEC 11801:2011 (Ed. 2.2) IEC :2010 / IEC :2010 EN :2011 EN :2007 amend. A1:2010 included ANSI/TIA-568-C.2:2009 Warranty 30 years on the CCS system Packaging CAT 6A Channel 10G.EXE CCS Easy Crimp shielded RJ45 jack 60 pcs CAT 6A Channel 10G.EXE CCS Easy Crimp unshielded RJ45 jack-anthracite 60 pcs CAT 6A Channel 10G.EXE CCS Easy Crimp unshielded RJ45 jack-white 60 pcs 8

9 Easy Crimp System Category 6A Channel easy crimp Patch panels General characteristics CAT 6A-10G CCS 24-port patch panel, supplied with 24 Easy Crimp shielded or unshielded RJ45 jacks for transmission channels of Class E A. The Easy Crimp termination system makes the connection fast and easy without the use of tools allowing a considerable time saving during the installation phase. Certified by independent testing laboratories in accordance with Class E A requirements on the channel link at 500 Mhz and with CAT 6A requirements on the single component, they support 10Gigabit Ethernet applications (IEEE 802.3an) and are suitable for POE+ (IEEE 802.3at). Certifications Channel Class E A Delta technical report N CAT 6 Component Level - Delta technical report N Approvals ISO/IEC 11801:2011 (Ed. 2.2) IEC :2010 / IEC :2010 EN :2011 EN :2007 amend. A1:2010 included ANSI/TIA-568-C.2:2009 Structure Equipment Dimensions Color Metal frame with 24 ports for Keystone Easy Crimp jacks; ABS casing with 8-position covers; mount release lateral screws cover with logos; Jacks layout in two rows; setting for connection to ground. 1 CCS 24-port patch panel; 24 CAT 6A-10G.EXE CCS Easy Crimp shielded or unshielded RJ45 jacks; frontal cover for 8/16/24 positions modules; clear plastic label-holder for the personalized numbering; rear cable management; 24 dust-protection caps for the jack; rack mount screws and nuts, cable ties. 19, 1 Unit Black Warranty 30 years on the CCS system Packaging CCS 24-port patch panel with 24 CAT 6A 10G. EXE Channel CCS Easy Crimp shielded RJ45 jacks 1 pc CCS 24-port patch panel with 24 CAT 6A 10G. EXE Channel CCS Easy Crimp unshielded RJ45 jacks 1 pc 9

10 Easy Crimp System Category 6 A Die-cast shielded jack General characteristics CAT 6 A CCS die-cast shielded CCS RJ45 jack for transmission channels of Class E A. The Easy Crimp termination system makes the connection fast and easy, without the use of tools allowing a considerable time saving during the installation phase. Certified by independent testing laboratories in accordance with Class E A requirements on the channel link at 500 Mhz and with CAT6 A requirements on the single component, they support 10Gigabit Ethernet applications (IEEE 802.3an) and are suitable for POE+ (IEEE 802.3at). Material Connection Installation Polycarbonate, high-impact, flame-retardant plastic housing, die-cast zinc alloy metal shell; 8 phosphor bronze contacts plated with 50 µm hard gold. Reusable connection cap with ergonomic slots to facilitate the conductors positioning; IDC insulation displacement for solid or stranded copper conductors of diameter from 22 to 26 AWG; double labeling color scheme indicating the two T568A/B connections, external cap for the termination protection; black anti-dust cap. Keystone universal snap-in for installation on panels, faceplates, adapters and outdoor boxes. Certifications Channel Class E A - GHMT technical report N.z2661a-11-E CAT 6 A Component Level - Delta technical report N Approvals ISO/IEC 11801:2011 (Ed. 2.2) IEC :2010 EN :2011 EN :2007 amend. A1:2010 included ANSI/TIA-568-C.2:2009 Warranty 30 years on the CCS system Packaging CAT 6A CCS Easy Crimp die-cast shielded Keystone RJ45 jack, T568A/B 60 pcs 10

11 Easy Crimp System Category 6 A easy crimp Patch panels General characteristics CAT 6 A CCS 24-port patch panel, supplied with 24 Easy Crimp die-cast shielded RJ45 jacks for transmission channels of Class E A. The Easy Crimp termination system makes the connection fast and easy without the use of tools allowing a considerable time saving during the installation phase. Certified by independent testing laboratories in accordance with Class E A requirements on the channel link at 500 Mhz and with CAT6 A requirements on the single component, they support 10Gigabit Ethernet applications (IEEE 802.3an) and are suitable for POE+ (IEEE 802.3at). Structure Equipment Dimensions Metal frame with 24 ports for Keystone Easy Crimp jacks; 8 position modules in ABS; mount release lateral screws cover with logos; Jacks layout in two rows to exceed the Alien Next requirements; setting for connection to ground. 1 CCS 24-port patch panel; 24 CAT 6 A CCS Easy Crimp die-cast shielded RJ45 jacks; cover for 8/16/24 positions modules; clear plastic labelholder for the personalized numbering; rear cable management; 24 dust-protection caps for the jacks; rack mount screws and nuts, cable ties. 19, 1 Unit Certifications Channel Class E A - GHMT technical report N.z2661a-11-E CAT 6 A Component Level - Delta technical report N Color Black Approvals ISO/IEC 11801:2011 (Ed. 2.2) IEC :2010 EN :2011 EN :2007 amend. A1:2010 included ANSI/TIA-568-C.2:2009 Warranty 30 years on the CCS system Packaging CCS 24-port patch panel with CAT 6A CCS Easy Crimp shielded RJ45 jacks 1 pc 11

12 Easy Crimp System Accessories 24-position blank Patch Panel Module covers Characteristics Characteristics Cover for 8/16/24 positions modules Jacks layout in 2 rows Clear plastic label-holder Metal frame for the shielded jacks grounding Rear cable management 2 covers for 8-position modules On frontal module of CCS Easy Crimp patch panels Optimize the distribution of the cabling and active links depending on the different multimedia applications Flame retardant thermoplastic material Easy Crimp 24-position blank Patch Panel Set of two black covers for CCS Easy Crimp patch panel Crimp tool Nippers Characteristics Characteristics Tool useful for the cable preparation and termination Pressure system for the protection of the cap closing Lenght-reference for the cable jacket cutting Blade inserts for cables with higher/lower diameter Thermoplastic flame retardant material Flat blade nippers to cut the excess conductors after CCS Easy Crimp free jacks crimping Made of steel, light blue handles in thermoplastic material Spring return to the opening position Flat blade for precise cutting Crimp tool for CCS Easy Crimp jacks Flat blade nippers for CCS Easy Crimp jacks

13 Patch cords and plugs Patch cords and plugs 13

14 Patch cords and plugs Category 5E Patch cords General characteristics CAT 5E CCS RJ45-RJ45 shielded or unshielded patch cord, with interchangeable colored clips. Characteristics meet and exceed CAT 5E - Class D requirements up to 100 Mhz according to EIA/TIA 568-C.2 and ISO/IEC Ideal for Gigabit Ethernet (IEEE 802.3ab) applications. Compliance CAT 5E Class D Approvals ISO/IEC 11801:2011 (Ed. 2.2) EN :2011 ANSI/TIA-568-C.2 Material Connection Applications Packaging Color U/UTP or F/UTP cable shielded with AL/PET tape, 100 Ohm, 4 balanced pairs, AWG 24/7 (UTP version) or AWG26/7 (FTP version) flex bare copper conductors; flame retardant thermoplastic outer jacket; RJ45 plug with 8 phosphor bronze contacts plated with 50 µm hard gold Thermo-sealed protection cap; insulation displacement according to IEC ; T568B wiring diagram; gray, blue, red, interchangeable clips for easy application identification Permanent connections between active transmission equipments and patch panels; interconnections between panels Every patch cord is individually packed Blue RAL 5015 or Gray RAL 7032 for the unshielded version Grey RAL 7032 for the shielded version Length Patch Cord CAT 5E U/UTP Grey Patch Cord CAT 5E U/UTP Blue Patch Cord CAT 5E F/UTP Grey 0,25 mt ,5 mt mt mt mt mt

15 Patch cords and plugs Category 6 Patch cords and plugs Patch cords General characteristics CAT 6 CCS RJ45-RJ45 shielded or unshielded patch cord, with interchangeable colored clips. Characteristics meet and exceed CAT 6 - Class E requirements up to 250 Mhz according to EIA/TIA 568-C.2 and ISO/IEC Ideal for Gigabit Ethernet (IEEE 802.3ab) applications. Material Connection Applications U/UTP or F/UTP cable shielded with AL/PET tape, 100 Ohm, 4 balanced pairs with AWG 24/7 (UTP version) or AWG26/7 (FTP version) flex bare copper conductors; flame retardant thermoplastic outer jacket; RJ45 plug with 8 phosphor bronze contacts plated with 50 µm hard gold Thermo-sealed protection cap; insulation displacement according to IEC ; T568B wiring diagram; gray, blue, red, interchangeable clips for easy application identification Permanent connections between active transmission equipments and patch panels; interconnections between panels Compliance CAT 6 Class E Approvals ISO/IEC 11801:2011 (Ed. 2.2) EN :2011 ANSI/TIA-568-C.2 Packaging Color White RAL 9018 Every patch cord is individually packed Length Patch Cord CAT 6 U/UTP White Patch Cord CAT 6 F/UTP White 1 mt mt mt mt mt mt mt

16 Patch cords and plugs Category 6 Patch cords - LSZH General characteristics CAT 6 CCS RJ45-RJ45 unshielded patch cord with LSZH jacket, supplied with interchangeable colored clips. Characteristics meet and exceed CAT 6 - Class E requirements up to 250 Mhz according to EIA/TIA 568-C.2 and ISO/IEC Ideal for Gigabit Ethernet (IEEE 802.3ab) applications. Material Connection U/UTP cable, 100 Ohm, 4 balanced pairs with AWG 24/7 flex bare copper conductors; LSZH (Low Smoke Zero Halogen) flame retardant thermoplastic outer jacket; RJ45 plug with 8 phosphor bronze contacts plated with 50 µm hard gold Thermo-sealed protection cap; insulation displacement according to IEC ; T568B wiring diagram; interchangeable clips for easy application identification Compliance CAT 6 Class E Approvals ISO/IEC 11801:2011 (Ed. 2.2) EN :2011 ANSI/TIA-568-C.2 Applications Packaging Permanent connections between active transmission equipments and patch panels; interconnections between panels Color Orange RAL 2003 Every patch cord is individually packed Length Patch Cord CAT 6 U/UTP Orange LSZH 1 mt mt mt mt

17 Patch cords and plugs Category 6 A Patch cords and plugs Patch cords General characteristics CAT 6 A CCS RJ45-RJ45 shielded or unshielded patch cord. Certified by independent testing laboratories in accordance with Class E A requirements on the channel link at 500 Mhz according to EIA/TIA 568-C.2 and ISO/IEC Ideal for 10 Gigabit Ethernet (IEEE 802.3an) applications. Material Connection Applications U/UTP or F/UTP cable shielded with AL/PET tape, 100 Ohm, 4 balanced pairs with AWG 24/7 (UTP version) or AWG26/7 (FTP version) flex bare copper conductors; flame retardant thermoplastic outer jacket; RJ45 plug with 8 phosphor bronze contacts plated with 50 µm hard gold Insulation displacement according to IEC ; T568B wiring diagram Permanent connections between active transmission equipments and patch panels; interconnections between panels Compliance Channel Class E A - GHMT technical report N.z2661a-11-E Packaging Every patch cord is individually packed Color White cable RAL 9018 Blue cap RAL 5015 Approvals ISO/IEC 11801:2011 (Ed. 2.2) EN :2011 ANSI/TIA-568-C.2 Length Patch Cord CAT 6A U/UTP White Patch Cord CAT 6A F/UTP White 1 mt mt mt mt

18 Patch cords and plugs Plugs Category 5E Category 6 CCS shielded or unshielded 8-pole plug to create patch cords. Characteristics meet and exceed CAT 5E - Class D requirements according to ISO/IEC and ANSI/TIA 568-B.2. CCS shielded or unshielded 8-pole plug with pre-insert used to create patch cords. Characteristics meet and exceed CAT 6 - Class E requirements according to ISO/IEC and ANSI/TIA 568-B.2. Characteristics Material Flame retardant thermoplastic material, with metal shell only for the shielded version Contacts 8 phosphor bronze contacts plated with 50 µm hard gold Characteristics Material Flame retardant thermoplastic material, with metal shell only for the shielded version Contacts 8 phosphor bronze contacts plated with 50 µm hard gold Installation On cables with flexible conductors Installation On cables with flexible conductors Compliance Category 5E Compliance Category 6 Approvals ISO/IEC 11801:2011 EN :2011 ANSI/TIA-568-C.2 Approvals ISO/IEC 11801:2011 EN :2011 ANSI/TIA-568-C CAT 5 unshielded 8-pole RJ45 plug-utp CAT 6 unshielded 8-pole RJ45 plug-utp CAT 5 shielded 8-pole RJ45 plug-stp CAT 6 shielded 8-pole RJ45 plug-stp 18

19 Patch cords and plugs Plugs Patch cords and plugs Easy Crimp CAT 5E General Characteristics CCS unshielded plug used to connect cables with solid conductors. With the tool-less Easy Crimp system, the connection is always fast and performing. Ideal for the realization of transition point or patch cords out of standard length. Characteristics meet and exceed CAT 5E - Class D requirements according to ISO/IEC and ANSI/TIA 568-B.2. Material Connection Installation Flame retardant thermoplastic material with high mechanical resistance; 8 phosphor bronze contacts plated with 50 µm hard gold IDC insulation displacement for solid copper conductors from 22 to 26 AWG; double labeling color scheme indicating the two T568A/B connections On cables with solid conductors Compliance Category 5E - Class D Approvals ISO/IEC 11801:2011 EN :2011 ANSI/TIA-568-C.2 Packaging CAT 5E UTP Easy Crimp plug cables with solid conductors 20 pcs 19

20 Patch cords and plugs Accessories Boots for RJ45 plugs Crimping tools Colored boots for protection against the flexion of terminations and useful for a perfect identification of the patch cord type. Available in different colors for a fast and easy identification of the cables. 8-position crimping tools for RJ45 plug suitable for CAT 5E and CAT 6 cables. Characteristics Characteristics Material Diameter High flex thermoplastic material 6,5 mm Material Burnished steel body, ergonomic handles made of thermoplastic material Color Blue, yellow, red, grey Application RJ45 plug crimping Packaging 100 pcs Mechanism Spring pressure system Color Body: black Handles: red or black according to the model Boot for plug - Yellow position crimping tool for RJ45 plug Boot for plug - Red position professional crimping tool for RJ45 plug Boot for plug - Blue Boot for plug - Grey 20

21 Work outlet Work outlet 21

22 Work outlet Adapters Adapters for RJ45 jacks-civil series Adapter for the installation of CCS RJ45 jacks on civil series frames. Adapters for BTicino frames Adapters for Vimar frames Adapter - Magic series Adapter - Living series Adapter - Living International series Adapter - Living Light series Adapter - Living Light Tech series Adapter - Magic TT series (Ivory) Adapter - Matix series (White) Adapter - Axolute series (Anthracite) Adapter - Axolute series (Metal grey) Adapter - Axolute (White) Adapters for Gewiss frames Adapter - Idea series (Anthracite) Adapter - Idea series (White) Adapter - Plana series (White) Adapter - Plana series (Silver) Adapter - Eikon series (Anthracite) Adapter - Eikon series (Metal grey) Adapter - Eikon series (White) Adapters for Legrand frames Adapter - Playbus series Adapter - System series (White) Adapter - System series (Anthracite) Adapter - Chorus series (Black) Adapter - Chorus serie (Titanium) Adapter - Chorus (White) Adapter - Vela series (Black) Adapter - Vela series (White) Adapters for ABB frames Adapter - Elos series (Black) Adapter - Chiara series 22

23 Work outlet Faceplates Work outlet 503 type faceplates Blind insert 2, 3, 4-position 503 type self supporting faceplates compatible with Keystone standard for CAT 5E, 6, 6A CCS shielded and unshielded jacks. Blind insert for faceplates codes /13/14 and for 16-port blank patch panel code allowing the closure of unused ports. General characteristics General characteristics Structure Flame retardant thermoplastic material with high mechanical resistance; identification label with clear plastic holder Structure Connection Flame retardant thermoplastic material with high mechanical resistance Snap-in Connection Compatible with 305 type Keystone standard Installation On self-supporting faceplate or panel Installation On recessed box or wall Color White Color White Self-supporting CCS 503 type 2-position faceplate Blind insert Self-supporting CCS 503 type 3-position faceplate Self-supporting CCS 503 type 4-position faceplate 23

24 Work outlet Faceplates and wall mount boxes German type faceplate French type faceplate Characteristics Characteristics Thermoplastic material, white color 2-position blank module for CCS Easy Crimp jacks 80x80 mm frame Label-holder window Installation on recessed box Thermoplastic material, white color 2-position blank module for CCS jacks compatible with Keystone standard, 45x45 mm with sash window Label-holder window Installation on recessed box position CCS German type self-supporting 80x80 faceplate position CCS French type self-supporting faceplate 1-position wall mount box 2-position wall mount box Characteristics Characteristics Thermoplastic material, white color 1 blank slot for CCS Keystone jacks Label-holder window Wall mount installation Thermoplastic material, white color 2 blank slots for CCS Keystone standard jacks Label-holder window Wall mount installation position outdoor blank wall mount box position outdoor blank wall mount box

25 ccs connectivity & cabling system is a trademark of: Qubix S.p.A. networking solutions Via Canada, 22/A Padova - italy Tel Fax CONNECTIVITY & CABLING SYSTEM