UNIVERSITY OF CALICUT (Purchase Division)

Size: px

Start display at page:

Download "UNIVERSITY OF CALICUT (Purchase Division)"

Sara Stephens
5 years ago
Views:

1 No /PURCHASE-ASST-A1/2013/CU UNIVERSITY OF CALICUT (Purchase Division) Calicut University. P.O., Dated, TENDER NOTICE Sealed and competitive tenders are invited for the installation of Internal LAN in various offices of the University of Calicut. The Tender form can be had from the Purchase Division or can be downloaded from the University website for which separate Chalan/Drafts should be enclosed. Sealed superscribed tenders with cost of tender form `416/- and EMD (1% of quoted rate) drawn in favour of Finance Officer should be submitted to the Deputy Registrar (Purchase) on or before Copy to:- System Administrator (with a request to publish the same in the website) Sd/- DEPUTY REGISTRAR (Purchase) For Registrar SL. No. DESCRIPTION MAKE UNIT QTY Supply Including TAX Labour Including TAX TOTAL AMOUNT (A) PASSIVE COMPONENTS (DATA / HORIZONTAL) 1) and laying of CAT 6, 4 Pair, UTP Cable (Reel of 305 s) 2) and fixing of Cat 6 Information Outlet Nos 2) and fixing of Single faceplate with cutouts to suite information outlets including fixing 4) and fixing of 24 port Cat 6 Jack Panel, fully loaded including termination 5) and fixing Cat 6 Patch Cord, 1 6) and fixing Cat 6 Patch Cord, 2 Nos. 7) and fixing Cat 6 Patch Cord, 3 Nos. 8) and Fixing of Surface Mount Box

2 9) Testing of nodes with latest state of the art FLUKE DTX cable analyser, 20 years performance warranty including cable route, as built diagram, node marking and documentation. TOTAL PART A Nos Nodes (B) PASSIVE COMPONENTS (DATA / BACKBONE) 1),laying, testing and commissioning ofo. F.Cable 06F Outdoor - Armoured Unitube MM (50/125um) OM3 - HDPE Sheath - Optical fibre cable 2) and installation of 24 Port Rack Mount LIU loaded MM 3) and installation of 12 Port Rack Mount LIU Loaded MM 4) and installation of SC-LC style Multi mode OM3 50 µm duplex patch cord-3mtr 5) PIGTAIL SC MM (50um) OM3 SIMPLEX LENGTH- 2m TOTAL PART B (C) NETWORKING / SERVER RACKS 1 4U/500/550 Rack/glass door, PDU 6 2 6U/500/550 Rack/glass door, PDU 6

3 3 9U/500/550 Rack/glass door, PDU U/500/550 Rack/glass door, PDU U/500/550 Rack/glass door, PDU 6 (D) 1 TOTAL PART C PVC PIPE / CHANNEL / TRUNKING & ACCESSORIES / fixing of 1" PVC Casing & capping 2 / fixing of 2" PVC Casing & capping 3 and laying of 25 MM PVC Conduit & accessories ISI with proper fittings to draw cables. 4 and laying of 32 MM conduit & accessories ISI with proper fittings to draw cables.. and fixing of consumables like ferrules, ties, velcros, screws, tapes, 5 cuddles, stickers for panels, patch cords with logo and lamination. TOTAL PART D Lot (E) ACTIVE COMPONENTS

4 1) 8 Port 10/100/1000 Mbps Switch with Loop Back Detection 2) 16 Port 10/100/1000 Mbps Switch with Loop Back Detection 3) 24 Port 10/100/1000 Mbps Switch with Loop Back Detection TOTAL PART E (F) OTHER ITEMS REQUIRED FOR INSTALLATION 2) Wireless Access Point -Wireleess N(300 Mbps) 2.4GHz PoE Access Point with2 x 5 dbi antenna TOTAL PART F SL No 1) Switch:24-Port Gigabit Switches The switch shall have 24 RJ-45 auto-negotiating 10/100/1000 ports Switching capacity of 48 Gbps Switching throughput of up to 35 million pps MAC Address table size of 8,000 entries The switch shall be 1U 19" Rack-Mountable Layer 2 features Shall support IEEE 802.1Q Shall support IEEE 802.1p QoS Loop back detection Security & QoS s Broadcst/Unicast/Unknown Storm Control Manageability Shall support cable diagnostics feature to remotely detect cable issues Warranty and Support Minimum 3 Years Warranty shall include software updates SL No 2) Switch:16-Port Gigabit Switches The switch shall have 16 RJ-45 auto-negotiating 10/100/1000 ports Switching capacity of 48 Gbps Switching throughput of up to 35 million pps MAC Address table size of 8,000 entries The switch shall be 1U 19" Rack-Mountable Layer 2 features Shall support IEEE 802.1Q

5 Shall support IEEE 802.1p QoS Loop back detection Security & QoS s Broadcst/Unicast/Unknown Storm Control Manageability Shall support cable diagnostics feature to remotely detect cable issues Warranty and Support Minimum 3 Years Warranty shall include software updates SL. No. 3) 8 Port 10/100/1000 Ethernet switch UTP Jacks for Information Outlet PCB based, Unshielded Twisted Type Pair, Category 6, TIA / EIA 568-B.2 Modular Jack 750 mating cycles Wire terminal 200 termination cycles Materials Housing Polyphenylene oxide, 94V-0 rated Wiring blocks Polycarbonate, 94V-0 rated Phosphorous bronze, plated with Jack contacts 1.27micro-meter thick gold UL listed,ertl Higher/Meets the Face plate Type 1-port, White surface box Material ABS / UL 94 V-0 No. of ports One ERTL Certfied,UL Listed. ETL verified Higher/Meets the Length Conductor Cat - 6 Patch Cord (1m/2m/3m) 1m/2m/3m 24 AWG 7 / 32 stranded copper Higher/Meets the

6 UTP CAT 6 ANSI/TIA/EIA Cable Type 568B.2.1,ERTL Certified Matching coloured boot to Plug Protection maintain bend radius Warranty 20-year component warranty Category Category 6 Phosphor Bronze with gold Terminals plating Jacket PVC Insulation Flame Retardant ERTL Certfied,UL Listed. ETL verified Cat- 6 Patch Panel 24 port patch panel, Unshielded Twisted Pair, Category 6, ANSI/TIA/EIA Type 568-B.2.1 Category Category 6 Circuit Identification Port Labeling for port identification Scheme on each for 24-ports Labels on each of 24/48-ports (to Port Identification be included in supply) Height 1 U (1.75 inches) Modular Jack 750 mating cycles ERTL Certfied,UL Listed. ETL verified Higher/Meets the Cat - 6 Cable Type Conductors Insulation Jacket Operating temperature Frequency tested up to Delay Skew Impedance Performance Characteristics to be provided with bid Unshielded Twisted Pair, Category 6, ANSI/TIA/EIA 568-B AWG solid bare copper Polyethylene/Polyolefin Flame Retardant PVC ERTL Certfied,UL Listed. ETL verified to ANSI/TIA/EIA 568-B.2.1 Cat 6-20 Deg. C up to +60 Deg. C 600 MHz 25ns-45ns / 100 mtr. Max. 100 Ohms + / - 6 ohms Attenuation, NEXT, PS NEXT, FEXT and Return Loss Higher/Meets the

Addendum - 1. Passive part - Sheet attached Annexure V - Sheet attached. This clause is removed. This clause is removed

Addendum - 1. Passive part - Sheet attached Annexure V - Sheet attached. This clause is removed. This clause is removed Addendum - 1 Tender No : KMRC/S&T/IT/NETWORK/12-13(R) Date of Addendum : 14 th SEPTEMBER 2012 Tender Submission Date and time : 20 th SEPTEMBER 2012 BY 1500 HRS Date and time of tender opening : 20 th