FIBRE MANAGEMENT. Optical Fibre Bend Limiting Tube. Optical Fibre Splice Protectors

Transcription

1 FIBRE MANAGEMENT Optical fibre is the future for communications, however, optical fibres are vulnerable, particularly in application areas where fibre breakout is required. It is here that transient losses and db loss can occur and cause signal failure and data errors, which is costly. Essentra Components has an extensive range of fibre optic products which meet the requirements of telecom and datacom applications at all levels of fibre optic equipment. Our products are designed to eliminate the potential hazards such as macro and micro bends resulting from the mishandling of optical fibres during installation, maintenance and upgrade. Optical Fibre Bend Limiting Tube Eliminates crushing and bending Suitable for blown Fibre Manages routing of Fibre See Page 408 Optical Fibre Splice Protectors Protects Fibre splice joints Inner strengthening core of steel or ceramic Heatshrink Polyolefin inner and outer tube See page

2 FIBRE MANAGEMENT Splice Trays and Supports Fibre Clips and Supports Fibre Reels and Guides Fibre Bend Limiting Tubing and Accessories 408 Fibre Breakout and Manifolds Fibre Strain Relief, Blanking Plugs and Caps

3 SPLICE TRAYS AND SUPPORTS Optical Fibre Splice Tray System OFST Lid, trays, and hinges all sold separately or in a kit: OFST-A-P-1 Inter-tray fiber routing possible through slots along one of the long sides OFSTH color coded hinges indicate side of tray to open from Can be used with OFSH splice holders, OFSP splice protectors and OFBLT bend limiting tubing Type 1 DARK FIBRE STORAGE Type 2 TYP TYP TYP TYP Type 3 Type 4 TYP TYP TYP TYP Type Description Material Color OFST-1-L 1 OF Splice Tray Lid PPE + PS Blend, RMS-105 Black 10 OFST-1-M 2 OF Splice Tray Managed with Radius Control & Dark Fiber Storage OFST-1-P 3 OF Splice Tray Plain with Basic Storage Facility OFSTH-1-RED 4 OF Splice Tray Hinge OFSTH-1-GRN 4 OF Splice Tray Hinge OFST-A-P-1 - Splice Tray Kit Includes: 1 x OFST-1-L, 1 x OFST-1-P, 2 x OFSTH-1-RED, 2 x OFSTH-1-GRN Glass-Filled UL94 V0 Nylon 6/6, RMS-18A Glass-Filled UL94 V0 Nylon 6/6, RMS-18A PP, RMS-150 & TPE, RMS-182 PP, RMS-150 & TPE, RMS-182 Black 10 Black 10 Red 20 Green 20 See above See above tel fax Free samples

4 SPLICE TRAYS AND SUPPORTS Optical Fibre Splice Holder OFSH-6 Natural PP, RMS-150 and TPE, RMS-182 OFSH 6 3.5L OPTIONAL LID SOLD SEPARATELY 4 FEET X Ø 5 OPTIONAL ADHESIVE PAD Contents OFSH No Adhesive 10 OFSH-6-3.5A With Adhesive, RMS OFSH-6-3.5L Lid Only 10 Splice Holder OFSH-T Black OFSH-T-6 designed to hold up to 6 x 3mm Fibre or components, i.e. couplers, splice protectors (OFSP on page 178), and WDM s OFSH-T-12 designed to hold up to 12 crimp splice protectors OFSH-T Splice Holders can be used with OFST Series Splice Trays OFSH-T-6 OFSH-T-12 Std Pack UL94 V2 UL94 V0 25% Glass-Filled UL94 V0 Qty Nylon 6/6, RMS-01 Nylon 6/6, RMS-19 Nylon 6/6, RMS-104 OFSH-T-6-01BLK OFSH-T-6-19BLK OFSH-T-6-GFBLK 100 OFSH-T-12-01BLK OFSH-T-12-19BLK sales@essentracomponents.co.uk web 393

5 SPLICE TRAYS AND SUPPORTS Splice Tray EFA Black UL94 V0 Nylon 6, RMS-390 Moulded-in features maintain bend radius at 30mm Accepts Isolator Clips EFA04 61, 63 and (shown below) for holding splicing components Accepts 16-way Fibre Clip EFA04 06 and broken into a 4-way segment for holding splicing components 8 x Ø 2.8mm on 30mm PCD EFA Way Splice Holder OFSH2 Black UL94 V0 Nylon 6/6, RMS-19 Type 1 Type 2 Type Mounting Method Splice Protector Size After Heat Shrink OFSH mm Thick adhesive pad, RMS-375 Up to OFSH No Adhesive Up to OFSH M3 OR #4 Screw Up to tel fax Next day delivery

6 SPLICE TRAYS AND SUPPORTS Optical Fibre & Ribbon Fibre Splice Protector OFSP/ROFSP Outer Tube - Heatshrink 3:1 Ratio Polyolefin, RMS-225 Inner Tube - Clear PE Copolymer Adhesive, RMS-226 Rod - OFSP - SS, RMS-227 ROFSP - Ceramic, RMS-170 Type Type 1 1 Type A Nominal Sleeve Length Ref. STAINLESS STEEL ROD INNER TUBE OUTER TUBE Type 22 CERAMIC ROD INNER TUBE OUTER TUBE Dimensions (mm) Std Pack B Inner C Nominal D Recovered Qty Tube Ø Rod Ø Ø Ref. OFSP OFSP OFSP OFSP OFSP OFSP OFSP OFSP OFSP OFSP ROFSP X 1 4 X X Optical Fibre Flat Manifold OFFM Natural PTFE UL94 V0, RMS-291 Grey Glass-filled UL94 V0 PBT, RMS-290 Maximum of 12 fibres A range of flanged termination crimp kits (OFTK Series) are available to give a strong, mechanical anchorage for common size element/blown fibre tubing and OFBLT The Optical Fibre Flat Manifold has the ability to breakout and protect primary fibre from cable element tubing, ribbon fibre or a blown fibre unit. The input fibre tube is secured by a clamping system moulded into the product. Each output fibre is protected in a 900 µm PTFE tube, also secured by a moulded detail miniflex 2 HOLES Ø3 Each Bag Supplied With: OFFM 10 Manifolds, No Tubing 10 OFFM Manifolds 120M coil PTFE NAT 10 x 30mm long silicone tube 10 x 15mm long silicone tube 10 pieces PE foam adhesive tape 10 Product Number Material PTFE NAT Natural PTFE UL94 V0, RMS m Optical Fibre Expandable Bracket OFEB Natural UL94 V-0 Nylon 6/6, RMS-19 Adhesive backing, RMS-15 6 x Ø3 TYP. 0.8 THICK, DOUBLE SIDED ADHESIVE TAPE OFEB sales@essentracomponents.co.uk web 395

7 FIBRE CLIPS AND SUPPORTS Coupler Clip EFA04-18/EFA04-71 Black UL94 V0 Nylon 6, RMS-390; Adhesive RMS-143 EFA04 18 can be broken apart to form individual clips EFA04 18 OPTIONAL OPTIONAL ADHESIVE PAD PAD EFA04 71 X03 Ø3.9 Coupler Clip EFA04 71 X01 Ø2.9 Coupler Clip EFA04 71 X02 Ø3.4 Coupler Clip Contents EFA way 3.9mm, 6-way 3.4mm, 6-way 2.9mm coupler clips 100 EFA04-18-ASS EFA with 8 adhesive pads 100 EFA way 2.9mm coupler clip 100 EFA04-71-P01 EFA with 3 adhesive pads 100 EFA way 3.4mm coupler clip 100 EFA04-71-P02 EFA with 3 adhesive pads 100 EFA way 3.9mm coupler clip 100 EFA04-71-P03 EFA with 2 adhesive pads 100 Isolator Clips EFA04-6X UL94 V0 Nylon 6, RMS-390; Adhesive, RMS-143 Designed for use in the Array Tray EFA (shown above) Can be screw or rivet mounted or mounted with self adhesive pads, please see Section C EFA has anti-rotation pins to securely mount when using screw or rivet Type 1 Type 2 Part Dimensions (mm) Std Type Contents Color Number A B Pack Qty EFA MM Isolator Clip Red EFA04-61-ASS 1 6MM Isolator Clip with Adhesive Pad Red EFA MM Isolator Clip Green EFA04-63-ASS 2 5.5MM Isolator Clip with Adhesive Pad Green EFA MM Isolator Clip Yellow EFA04-64-ASS 2 4.5MM Isolator Clip with Adhesive Pad Yellow tel fax Free samples

8 FIBRE CLIPS AND SUPPORTS 16-Way Fibre Clips EFA04-06/EFA04-08 UL94 V0 Nylon 6, RMS-390; Adhesive RMS-143 Can be broken apart to form 3 individual clips holding 4, 4 and 8 components A broken apart 4-way can be used in the Splice Tray EFA OPTIONAL ADHESIVE PAD Contents Color A (mm) EFA way 3mm fibre clip Black EFA04-06-ASS 16-way 3mm fibre clip with adhesive pad Black EFA way 2mm fibre clip Blue EFA04-08-ASS 16-way 2mm fibre clip with adhesive pad Blue Optical Fibre Splice Holder OFSH-4 Natural Holds 12 x 2.7mm or 4 x 4.2mm splices Fastens with either a self-adhesive pad RMS-270, provided, or via a screw or rivet Material OFSH LA UL94 V-2 Nylon 6/6, RMS OFSH LA UL94 V-0 Nylon 6/6, RMS Fibre Clip EFA ASS Black UL94 V0 Nylon 6, RMS-390 Designed to hold 3mm diameter fibre or components, i.e. couplers, splice protectors, and WDM s ADHESIVE PAD Contents EFA ASS 3mm fibre clip with adhesive, RMS sales@essentracomponents.co.uk web 397

9 FIBRE CLIPS AND SUPPORTS OFBLT Mounting Saddle OFTGSP Natural UL94 V0 Nylon 6/6, RMS-19 Type 1 Type 2 Type Hole Ø Panel Thickness Max. OFTGSP ± OFTGSP ± Type 1 Mounting Hole Detail Type 2 Mounting Hole Detail Mini Optical Fibre Network Saddle on Adhesive Base MOFNSB Adhesive Back: RMS-15 Natural Nylon 6/6, RMS-01 Natural UL94 V0 Nylon, 6/6RMS-19 MOFNSB-2-01A-RT MOFNSB-2-19A-RT 1000 TYPICAL RELEASE TAB LOCATION DOUBLE SIDED ADHESIVE TAPE Optical Fibre Slotted Multi Bracket OFSMB Black Glass-Filled UL94 V0 Nylon, RMS-104 Miniflex technology manufactured by Richco - patented Optical Fibre Slotted Multi-Brackets are for use at distribution points where orderly fibre management, protection and strain relief are required An additional security feature allows fitting of a cable tie around OFSMB s which prevents removal of any retained tubes OFBLT retention: >70N Holds a maximum of 12 tubes T YP. T YP. BASE THICKNESS OFSMB-4-05GFBK 10 T YP. 398 tel fax Next day delivery

10 FIBRE CLIPS AND SUPPORTS Optical Fibre Holder on Base, 3mm OFHB3 Natural UL94 V0 Nylon 6/6, RMS-19 Adhesive Backing, RMS TYP. 4 x Ø 3 CABLES Product Number OFHB3-4-19A-RT 1000 DOUBLE SIDED ADHESIVE TAPE TYPICAL RELEASE TAB LOCATION Optical Fibre Holder on Base, 2mm OFHB2 Natural Nylon 6/6, RMS-19 4 x Ø 2 TYP. TYPICAL RELEASE TAB LOCATION.8 THICK DOUBLE SIDED ADHESIVE, RMS-102 OFHB2-4A1-RT Optical Fibre Bracket, Blind Hole OFB-BH Natural UL94 V0 Nylon 6/6, RMS-19 Type 1 Type 2 CABLES CABLES Type Hole Ø Panel Thickness OFB-BH ± Min OFB-BH ± Min Optical Fibre Bracket, 3mm, Plug-In, 4 Slot OFB3P Natural UL94 V0 Nylon 6/6, RMS-19 Anti-rotation pin prevents fibre kinking due to bracket turning in the mounting hole OFB3P RECOMMENDED MOUNTING HOLES IN 1.6 MAX. THICK PANEL sales@essentracomponents.co.uk web 399

11 We make it easy We re constantly expanding our product range, our full offering now including over 28,000 products. Simply call us on (local call rate) or request online at We've got over 1 Billion components in stock - all available for next day delivery! MORE CHOICE FREE SAMPLES NEXT DAY TEL: FAX: sales@essentracomponents.co.uk

12 Visit us online! Buy Online Request free samples Easy to find products ESSENTRA COMPONENTS Download 3D CAD files INCORPORATING OVER 4,000 NEW PRODUCTS TEL MORE CHOICE FREE SAMPLES NEXT DAY Conditions of sale can be found on our website -

13 FIBRE REELS AND GUIDES Optical Fibre Coiling Clip OFCC/OFCG Black Rigid PVC, RMS-04; Adhesive, RMS-15 Two extruded clips snap into each other to form a clip with a smooth, curved surface to accommodate fibre optic bundles Type 1 Type 2 DOUBLE SIDED ADHESIVE TAPE 1.6 THICK R40.6 MIN.. Type OFCC-16A-RT OFCG Chain Plate OFCP Natural UL94 V0 Nylon 6/6; RMS-19 Complete the circle for an excess fibre spool to form a Y for breakout points All connections maintain a bend radius greater than 30mm OFCP Optical Fibre Support Base OFSB Designed for use in fibre optic patch panel applications 4.75 DIA. 4.8 DIA. R43.2 Natural UL94 V2 Nylon 6/6, RMS-01 Natural UL94 V0 Nylon 6/6, RMS-19 Mounting Method OFSB A OFSB A Adhesive tape, RMS OFSB OFSB Screw or Rivet Mount THICK, DOUBLE SIDED ADHESIVE TAPE 1.5 TYP. WALL THICK 26 DIA. Mounting Rivets Hole Ø Panel Thickness Range SR SR SR SR SR SR SR tel fax Next day delivery

14 FIBRE REELS AND GUIDES Fibre Reels EFA04 UL94 V0 Nylon 6, RMS-390; Adhesive: RMS-143 Board mountable using standoff EFA04 27 ASS Stackable using Stacking Pillar EFA04 53 ASS Type 1 can be broken apart into 4x90 bending control devices Type 2 8 Holes Ø2.8, C/SK Ø4.6 with 0.5 parallel 90 Incl. on 30mm PCD Type 1 8 Holes, Ø2.8 C/SK Ø4.6 with 0.5mm parallel 90 Incl. on 30mm PCD Type 3 4 Holes Ø2.8, C/SK Ø4.6 with 0.5 parallel 90 Incl. on 30mm PCD 4 Holes Ø4 thru on a 15mm PCD Type Contents C (mm) Max. Fibre Storage EFA mm radius fibre reel 4 2.5m of 900 micron fibre 100 EFA04-04-ASS 1 EFA with 4 self-adhesive pads 4 2.5m of 900 micron fibre 100 EFA mm radius fibre reel m of 900 micron fibre 100 EFA04-21-ASS 1 EFA with 4 self-adhesive pads m of 900 micron fibre 100 EFA mm radius fibre reel 3.9 3m of 900 micron fibre 100 EFA04-10-ASS 2 EFA with 4 self-adhesive pads 3.9 3m of 900 micron fibre 100 EFA mm radius fibre reel m of 900 micron fibre 100 EFA04-14-ASS 2 EFA with 4 self-adhesive pads m of 900 micron fibre 100 EFA mm radius fibre reel 8 15m of 900 micron fibre 100 EFA04-76-ASS 2 EFA with 4 self-adhesive pads 8 15m of 900 micron fibre 100 EFA mm radius fibre reel m of 900 micron fibre 100 EFA04-23-ASS 3 EFA with 4 self-adhesive pads m of 900 micron fibre 100 sales@essentracomponents.co.uk web 403

15 FIBRE REELS AND GUIDES Fibre Reel Mounting Pillar EFA04-53-ASS Black UL94 V0 Nylon 6, RMS-390 Pillar is rivet mounted from the bottom of the board with SRHR rivet Reels are retained using the included spring retaining clip Fibre Reel Standoff EFA04-27-ASS Black UL94 V0 Nylon 6, RMS-390 Standoff is rivet mounted from the bottom of the board with SRHR-3555 rivet Reel snaps onto the top of the standoff, holding it in place SPRING RETAINING CLIP INCLUDED EFA04-53-ASS 100 EFA04-27-ASS 50 Fibre Winding Reel EFA04-67-ASS Black UL94 V0 Nylon 6, RMS-390 Wound fibre is taped to maintain bend radius and provide identification (tape not supplied) Two-part reel is then disassembled for easy fibre removal Stores up to 8m of 900 micron fibre at a 30mm radius Reusable EFA04-67-ASS tel fax Free samples

16 FIBRE REELS AND GUIDES Corner Guide EFA04-34 Black UL94 V0 Nylon 6, RMS-390 Maintains bending radius through a 90 turn Type 1 Type 2 Type 3 Type 4 Type Contents A Height EFA mm Radius Corner Guide EFA04-34-P02 1 Guide with Self-Adhesive Pad EFA04-34-R02 1 Guide with SRHR-3555 Rivets EFA04-34-PR2 1 Guide with Pad and Rivets EFA mm Radius Corner Guide EFA04-34-P05 1 Guide with Self-Adhesive Pad EFA04-34-R05 1 Guide with SRHR-3555 Rivets EFA04-34-PR5 1 Guide with Pad and Rivets EFA mm Radius Corner Guide EFA04-34-P01 2 Guide with Self-Adhesive Pad EFA04-34-R01 2 Guide with SRHR-3555 Rivets EFA04-34-PR1 2 Guide with Pad and Rivets EFA mm Radius Corner Guide EFA04-34-P10 2 Guide with Self-Adhesive Pad EFA04-34-R10 2 Guide with SRHR-3555 Rivets EFA04-34-PR0 2 Guide with Pad and Rivets EFA mm Radius Corner Guide EFA04-34-P04 2 Guide with Self-Adhesive Pad EFA04-34-R04 2 Guide with SRHR-3555 Rivets EFA04-34-PR4 2 Guide with Pad and Rivets EFA mm Radius Corner Guide EFA04-34-P03 3 Guide with Self-Adhesive Pad EFA04-34-R03 3 Guide with SRHR-3555 Rivets EFA04-34-PR3 3 Guide with Pad and Rivets EFA mm Radius Corner Guide EFA04-34-P06 3 Guide with Self-Adhesive Pad EFA04-34-R06 3 Guide with SRHR-3555 Rivets EFA04-34-PR6 3 Guide with Pad and Rivets EFA Ribbon Fiber Guide EFA04-34-P07 4 Guide with Self-Adhesive Pad EFA04-34-R07 4 Guide with SRHR-3555 Rivets EFA04-34-PR7 4 Guide with Pad and Rivets sales@essentracomponents.co.uk web 405

17 FIBRE REELS AND GUIDES Straight Guide EFA04 60 Black UL94 V0 Nylon 6, RMS-390 Contents EFA Guide 100 EFA04-60-P01 Guide with Self-Adhesive Pad 100 EFA04-60-R01 Guide with SRHR-3555 Rivets 100 EFA04-60-PR1 Guide with Pad and Rivets 100 Optical Flexible Fibre Guide System OFFG-165M-19-BK T YP. OFFG/OFFGSP Black UL94 V0 Nylon 6/6, RMS-19 For use with 250 and 900 micron fibre Fibre can enter and exit at any point, without risk of fibre snagging or kinking CREATES 25.0 BEND LIMITING FEATURE WHEN CHANNEL IS FLEXED INTO POSITION T YP. T YP. T YP. T YP. GUIDE CAN BE CUT TO VARIOUS LENGTHS AT FLEXIBLE LINK SECTIONS OFFGSP-F OFFGSP-R T YP. Patented TO SNAP-LOCK INTO A 2.5±0.05 HOLE, IN A 1.6 BOARD THICKNESS TO SNAP-LOCK INTO A 2.5±0.05 HOLE, IN A 1.6 BOARD THICKNESS OFFG Mounting Type Standoff Height A OFFGSP-F-19-BK Flat Support Post OFFGSP-R-05-BK Standoff Support Post OFFGSP-R-10-BK Standoff Support Post OFFGSP-R-16-BK Standoff Support Post OFFG-165M-19-BK tel fax Next day delivery

18 FIBRE REELS AND GUIDES Optical Fibre Network Saddle OFNS Type 1 Type 2 Type 3 Type 4 Type 5 Type 6 SEE FIGURE Dimensions (mm) Mounting Panel Std Natural UL94 V2 Nylon 6/6, Black UL94 V2 Nylon 6/6, Natural UL94 V0 Nylon 6/6, Type A B C D Hole Thickness Pack Qty RMS-01 RMS-01 RMS-19 OFNS OFNS B OFNS Ø OFNS OFNS B OFNS Ø OFNS OFNS B OFNS Ø OFNS OFNS B OFNS Ø OFNS-16-S OFNS16-S307-01B OFNS-16-S Square OFNS OFNS B OFNS Ø OFNS13-S9.5M-01 OFNS13-S9.5-01B OFNS13-S9.5M Square OFNS16-S9.5M-01 OFNS16-S9.5-01B OFNS16-S9.5M Ø OFNS28-S9.5M-01 OFNS28-S9.5-01B OFNS28-S9.5M Square OFNSB16-01A2-RT - OFNSB16-19A2-RT thick adhesive, RMS thick adhesive, RMS OFNSB13-01A2-RT - OFNSB13-19A2-RT thick adhesive, RMS thick adhesive, RMS Optical Fibre Rack Bracket OFRB Black UL94 V0 Nylon 6/6, RMS-19 Mounts into a 19 rack with a 1/4 turn SECTION A-A PANEL DETAIL, 1.6 THICK PANEL Dimensions (mm) A B OFRB-1BK OFRB-2BK sales@essentracomponents.co.uk web 407

19 FIBRE BEND LIMITING TUBING AND ACCESSORIES Optical Fibre Bend Limiting Tubing OFBLT Optical Fibre Bend Limiting Tubing offers the ultimate protection to fibres eliminating problems such as crushing, kinking, and micro bending, while supplying an entire, selfmanaging solution to managing the routing of fibre Suitable for blown fibre applications over short distance and for curbside FTTH/FTTB applications BENDING RESISTANCE (N) Bend Limiting Modulus of 5mm Diameter OFBLT Limiting Radius Limiting Stiffness 0.42N/mm radius Flexing Stiffness 0.052N/mm radius BENDING RADIUS (mm) BLM = Limiting Stiffness = 8 Flexing Stiffness White PP, RMS-86 Black PBT, RMS-140 D Dimensions (mm) d Install Tool Required Standard Version OFBLT PP OFBLT PP OFBLT-31-05V OFBLT-33-05V OFBLT PP OFBLT V Pull-Cord Version OFBLTP PP OFBLTP-31505PP OFBLTP V OFBLTP-42635PP OFBLTP V Slit Version OFBLTS PP OFZT-2-14-RD 100 OFBLTS PP OFBLTS V OFZT-3-14-BLK 100 OFBLTS-42635PP OFBLTS V OFZT-3-14-BLK 100 (Metres) Tube & Pipe Clip TPCE Ø 5.1 For OFBLT 5mm OD TO SNAP LOCK IN A Ø 6.5 ± HOLE, IN A THICK PANEL Std Natural UL94 V2 Natural UL94 V0 A (mm) Pack Qty Nylon 6/6, RMS-01 Nylon 6/6, RMS-19 TPCE5-51-4M-01 TPCE5-51-4M TPCE5-51-6M-01 TPCE5-51-6M TPCE5-51-8M-01 TPCE5-51-8M TPCE M-01 TPCE M tel fax Free samples

20 Optical Fibre Single Slotted Multi Bracket OFSSMB Black Glass-Filled UL94 V0 Nylon, RMS-104 OFBLT retention: >70N Holds a maximum of 3 tubes Ability to latch to other OFSSMB s HOLE Ø5 FIBRE BREAKOUT AND MANIFOLDS HOLE Ø OFSSMB-1-05GFBK-1-05GFBK 10 Optical Fibre Cable Breakout Unit OFCBU Black UL94 V0 Nylon 6/6, RMS-19; Bolt: Stainless Steel At distribution points, multi-fibre cables need to have the individual fibres or cable elements separated and protected by a management system. The cable strength member has to be terminated and anchored to prevent damage to the fibres from cable movement or pull out Dimensions (mm) Std Pack d1 d2 D H L X Y Qty OFCBU B Optical Fibre Cable Gland Box OFCBUGB Cable retention: >1.5kN OFBLT retention: >100N Maximum of 24 cable elements or 24 fibre bundles Cable Ø Contents OFCBUGB Gland Box (OFCBU BLK) Assembled 1 OFCBUGB Gland Box (OFCBU BLK) Assembled 1 OFCBUGB Gland Box (OFCBU BLK) Assembled 1 OFCBUGB Gland Box (OFCBU BLK) Sold Separately 1 OFCBUGB Gland Box (OFCBU BLK) Sold Separately 1 Optical Fibre Manifold OFM Black UL94 V0 Nylon 6/6, RMS-19 The 1 into 4 Optical Fibre Manifold enables small multiple fibre cables with aramid and similar strength reinforcement or central GRP strength member to be mechanically and securely terminated. The manifold is stackable, and retains tubes greater than 100N. A development kit is also available that contains all adapters, OFM BLK. Incoming Cable Size Adapter Colour OFM-C BK Black 10 OFM-C BK 3-4 Blue 10 OFM-C BK Brown 10 OFM-C BK Green 10 OFM-C BK Red 10 OFM-C BK Black Rubber 10 OFM-C BK Black Rubber 10 OFM-T-05-19BLK 5 OFBLT Split Black 10 OFM-T BLK OFBLT Split Blue 10 sales@essentracomponents.co.uk web 409

21 FIBRE BREAKOUT AND MANIFOLDS Optical Fibre Duplexer OFD Black UL94 V0 Nylon 6/6, RMS-19 The Optical Fibre Duplexer enables cables with aramid strands to be broken out and mechanically terminated The Duplexer gives a range of input adapters to cover OFBLT, fibre bundles, cable and patch cords from 2.5mm to 7.00mm in diameter. For cables up to 10.8mm in diameter, a rubber sleeve is provided Tube retention: >100N For a Development Kit containing all adapters, order: OFD-C-05-19BLK Dimensions (mm) Part L W w H d OFD series Incoming Cable Size Adapter Color OFDC BK Black 10 OFDC BK 3-4 Blue 10 OFDC BK Brown 10 OFDC BK Green 10 OFDC BK Red 10 OFDC BK Black Rubber 10 OFDC BK Black Rubber 10 OFDC BK 5 OFBLT Split Black 10 OFDC BK 6.35 OFBLT Split Blue 10 Optical Fibre Segment 90, 30mm Radius OFS90 Natural UL94 V0 Nylon 6/6, RMS-19 Assemble two pieces for bend control around a 180 turn In a four-piece assembled mode, stores approximately 60m of 900 micron fibre.. SEE TABLE T YP. OFS T YP. T YP. SUGGESTED MOUNTING HOLE LOCATION Mounting Rivets Part Panel Mounting Std Number Thickness Range Hole Ø Pack Qty SRV Up to SRV SRV SRV SRV SRV SRV SRV tel fax Next day delivery

22 FIBRE STRAIN RELIEF Quick Panel Mount Strain Relief Gland EFA52-XX-ASS Black UL94 V-0 Nylon 6, RMS-390 Provides added protection to jacketed and bare fibre while routed through a hole M9 x.75 Nut A (mm) EFA52-02-ASS EFA52-05-ASS FIBER CAP (1) LOOSE and (1) TIGHT supplied with kit Quick Panel Mount Strain Relief Gland, Slot in Version EFA52-03-ASS Black UL94 V-0 Nylon 6, RMS-390 FIBER CAP (1) LOOSE and (1) TIGHT supplied with kit EFA52-03-ASS Micron Boot EFA Black TPE, RMS-185 Other colors available by special order EFA Strain Relief Boot 900 Micron Fibre EFA Black TPE, RMS-185 Hole Ø Panel Thickness EFA sales@essentracomponents.co.uk web 411

23 BLANKING PLUGS AND CAPS Ø 2.5mm Ferrule Dust Cap EFA Black TPE, RMS-185 EQUISPACED EFA One-Piece Dust Cap and Tie EFA02 Black PVC, RMS-186 Contents Dimensions (mm) A B C D EFA02-08-ASS One-Piece Biconic Dust Cap & Tie EFA02-11-ASS One-Piece FC/ST Dust Cap & Tie EFA02-13-ASS One-Piece ST Connector Dust Cap & Tie One-Piece ST Adapter Dust Cap and Tie EFA Black TPE, RMS TYP 4 HOLES DIA 2.38 EFA tel fax Free samples

24 BLANKING PLUGS AND CAPS Dust Caps with Metal Chain EFA02 Stainless Steel/Black TPE, RMS-185 The mounting hole for EFA02 14 is a blind hole and does not expose the adapter/connector and can be used on its own. Other dust caps in this series require the retaining chain and cannot be sold separately, as this leaves a hole exposing the connector/adapter Type 1 - Stainless Steel Cap & Chain Type 2 - TPE Cap, Stainless Steel Chain Typical Assembly for EFA02 Series Dust Caps with Metal Chains Type 1 EFA02-04-ASS SMA Adapter Dust Cap Assembly EFA02-09-ASS FC Adapter Dust Cap Assembly EFA02-14-ASS SC Adapter Dust Cap Assembly Contents EFA02-04-ASS EFA02 04 Dust Cap and Chain 100 EFA02-07-ASS EFA02 07 Dust Cap and Chain 100 EFA02-09-ASS EFA02 09 Dust Cap and Chain 100 EFA02-10-ASS EFA02 10 Dust Cap and Chain 100 Type 2 EFA02-07-ASS DIN Adapter Dust Cap Assembly EFA02-10-ASS ST Adapter Dust Cap Assembly Contents EFA SC Adapter Dust Cap 250 EFA02-14-ASS EFA Dust Cap with Chain 250 FC Adapter Dust Cap EFA02-03-XXX HDPE, RMS-183 Available in different colours Color EFA Natural 500 EFA Black 500 EFA Green 500 EFA White 500 EFA Red 500 Adapter Dust Cap EFA02-43-XXX Black PVC, RMS-187 Contents L ID T At Open End EFA SMA Connector Adapter Dust Cap EFA ST Adapter Dust Cap EFA FC Adapter Dust Cap sales@essentracomponents.co.uk web 413

25 BLANKING PLUGS AND CAPS USB Connector Plug CP-USB-B Black Silicone Rubber, RMS-383 EPDM Rubber, RMS-427 CP-USB-B CP-USB-B Optical Fibre Connector Cutout Adapter - SC/ST OFCA-SC/ST-01 Natural Nylon 6/6, RMS-01 Converts a hole cut out for an SC connector into a hole cut out for an ST connector HOLE DETAIL PANEL THICKNESS: OFCA-SC/ST Optical Fibre Bend Limiting Tubing Clip OFBLT-C1 Natural TO HOLD OFBLT-XX-05-XX TO SNAP FIT IN A /-0.2 DIA. HOLE, IN A THICK PANEL Material OFBLT-C UL94 V2 Nylon 6/6, RMS OFBLT-C UL94 V0 Nylon 6/6, RMS tel fax Next day delivery

26 BLANKING PLUGS AND CAPS Blanking Plugs BPE UL94 V-2 Nylon 6/6, RMS-01 ST Series covers Double-D, D or round hole cutouts for unused terminals in fibre optic boxes Type 1 Type 2 Type Dimensions (mm) Hole Size Std Panel Thickness Colour A B C D E L1 L2 Pack Qty BPE-SC Black 1000 BPE-SC Black 1000 BPE-SC Black 1000 BPE-RJ , 1.2, 1.6, 2.7, 3.5 Grey 1000 BPE-RJ45-01BK , 1.2, 1.6, 2.7, 3.5 Black 1000 BPE-RJ45-01WH , 1.2, 1.6, 2.7, 3.5 White 1000 BPE-LC-D , 1.2, 1.6, 2.7, 3.75 Black 1000 BPE-ST Ø12 Ø9.2 Ø Ø Black 1000 RJ Connector Plugs CP-RJ Black A (mm) To Accommodate Material CP-RJ RJ11 Connector Silicone Rubber, RMS CP-RJ RJ11 Connector EPDM Rubber, RMS CP-RJ RJ45 Connector Silicone Rubber, RMS CP-RJ RJ45 Connector EPDM Rubber, RMS USB Connector Plugs CP-USB-A Black Silicone Rubber, RMS-383 EPDM Rubber, RMS-427 CP-USB-A CP-USB-A sales@essentracomponents.co.uk web 415