IBM BladeCenter HS21 blades offer optimum performance efficiency with powerful, quad-core processor performance

Transcription

1 IBM United States Announcement , dated June 19, 2007 IBM BladeCenter HS21 blades offer optimum performance efficiency with powerful, quad-core processor performance Key prerequisites...2 Description...3 Product positioning... 8 Reference information... 9 Publications... 9 Services...9 Technical information...10 IBM Electronic Services...18 Terms and conditions Prices...22 Order now...23 At a glance BladeCenter HS21 blade servers revolutionize the economics of application server deployment with power, scalability, control, and serviceability. These new server models include: Single-wide, high-performance blade servers Intel high-performance, quad-core processors with 2 MB L2 cache per core (8 MB per processor) Up to two quad-core Xeon processors with 1066 or 1333 MHz 1 front-side bus (FSB) Standard models with high-speed 2 GB (2 x 2 GB DIMMs) PC MHz high-performance double data rate (DDR2) ECC memory; maximum system memory 16 GB 2 expandable to 32 GB using the IBM BladeCenter Memory and I/O Expansion Blade option Dual Broadcom 5708S Gigabit Ethernet connections with failover support; additional Dual Gigabit Ethernet connections with Broadcom 5714s, using the IBM BladeCenter Memory and I/O Expansion Blade option Support for Ethernet or Fibre Channel expansion cards Integrated systems-management processor Support for up to two non-hot swap SAS SFF HDDs with RAID 0 and 1 Support for IBM BladeCenter Storage and I/O Expansion Blade with three additional hot-swap SAS SFF HDDs and optional support for RAID 0, 1, or 5 For ordering, contact: Your IBM representative, an IBM Business Partner, or the Americas Call Centers at 800-IBM-CALL Reference: SE001 Overview BladeCenter HS21 blade servers, coupled with the BladeCenter chassis, deliver advanced application serving with performance, density, and scalability ideal for enterprise environments. Features, functions, support, and services at your command include: Blade servers supported in IBM BladeCenter chassis Powerful, high-performance, quad-core processors IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 1

2 Shared 2 MB L2 cache per core (8 MB per processor) 1066 or 1333 MHz front-side bus (FSB) Dual Gigabit Ethernet connections Up to 32 GB of high-speed memory with ECC (four DIMM slots x 4 GB/DIMM on 30-mm blade and eight DIMM slots x 4 GB/DIMM with Memory and I/O Expansion Blade) Up to two non-hot-swap SAS SFF HDDs (36, 73, and 146 GB each) with RAID 0 and 1 in the single-wide configurations Optional IBM BladeCenter Storage and I/O Expansion Blade with support for up to three additional hot-swap SAS SFF HDDs with RAID 0 and 1, and optional RAID 5, as well as two additional I/O expansion slots Advanced high-availability and systems-management features Service and support perfected for On Demand Business IBM Director and Remote Deployment Manager ServerProven compatibility testing and Web support Warranty: Three years, customer replaceable unit (CRU) and on-site service 3, limited warranty 4 ; optional warranty service upgrades available Optional IBM BladeCenter Memory and I/O Expansion Blade that allows expansion up to 32 GB of high-speed memory with ECC (eight DIMM slots x 4 GB/DIMM), one additional I/O expansion slot, and two additional Dual Gigabit Ethernet connections (total of four) These features make these BladeCenter HS21 models an attractive, economical approach to the deployment of large numbers of powerful servers that effectively use space and power resources. 1 GHz and MHz denote the internal and/or external clock speed of the microprocessor only, not application performance. Many factors affect application performance. 2 Using 4 GB DIMMs. 3 IBM sends a technician after attempting to diagnose and resolve the problem remotely. 4 For information on the IBM Statement of Limited Warranty, visit Alternatively, this information is also available by contacting your IBM representative or reseller. Copies are available upon request. Note: The information in IBM announcement letters is subject to change without notice. Consult the IBM Sales Manual, or your IBM representative or reseller, for the most current information regarding IBM products. Key prerequisites BladeCenter chassis Monitor, keyboard, and mouse for setup Network switch module Boot device, such as on-board HDDs or network storage device Management module with latest level firmware Rack with appropriate PDUs and main power distribution Planned availability date June 26, 2007: HS21 BladeCenter models and options IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 2

3 Description Related options IBM processor upgrades Quad-Core Intel Xeon Processor E5310 (1.6GHz 1066MHz 8MB L2 Cache 80w) Upgrade Processor Option 40K1270 BladeCenter HS21 High-performance, blade-server subsystems: The BladeCenter HS21 blade servers are high-throughput, two-way, SMP-capable blade servers, and are highly scalable when you add memory. One processor is standard on the blade server. High-speed PC MHz high-performance double data rate (DDR2) ECC memory is synchronized to the processor-to-memory subsystem performance with current processors. The BladeCenter HS21 uses the Intel Blackford (E7520) system chipset that includes: Memory and I/O Controller (MCH) (North Bridge) Intel PXH ESB2 (South Bridge) The MCH includes: Integrated high-performance main memory subsystem Integrated PCI Express interface Maximized throughput between processors and main memory The PXH includes: Ability to bridge a PCI Express bus to a PCI-X bus. The PXH connects to the MCH via a PCI Express (x4) bus. Capacity to serve as a bridge and convert transactions on the PCI Express bus to transactions on the PCI-X bus. The ESB2 includes: USB interface Local on-blade service processor interface PCI-X bus interface to the LSI 1064 SAS controller and PCI bus interface to the ATI ES1000 (RN50) video controller Systems-management bus, supporting Philips I2C two-wire protocol interface Low-power controller interface for POST/BIOS EEPROM Dual Gigabit Ethernet connections One external PCI-X bus segment for an I/O expansion card connector IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 3

4 Standard BladeCenter HS21 configuration CPU Information by model Intel CPU CPU CPU FSB CPU Model name speed power speed cache 8853EQx E GHz 80W 1066 MHz 8 MB 8853ERx E5345 2X2.33 GHz 80W 1333 MHz 8 MB 8864EAx 7110N 2.50 GHz 95W 667 MHz 2 MB 8864EBx 7110N 2X2.50 GHz 95W 667 MHz 2 MB Model configurations Intel CPU Standard DIMM Blade Chassis Model name CPUs memory slots HDDs width supported 8853EQx E x 2 GB 4 Open 30mm BCH (8852) BC (8677) 8853ERx E x 2 GB 4 Open 30mm BCH (8852) BC (8677) 8864EAx 7110N 1 2x 1 GB 4 Open EBx 7110N 2 2x 1 GB 4 Open 8864 Additional features BladeCenter HS21 system board contains four DIMM connectors (30-mm blade), optionally upgradeable to eight DIMM connectors using the IBM BladeCenter Memory and I/O Expansion Blade (60-mm configuration). Each DIMM connector supports 512 MB, 1 GB, 2 GB, or 4 GB DIMM options: Up to 16 GB of system memory is supported with four DIMM connectors. Memory is two-way interleaved (must be installed in matched pairs). Memory sizes can be mixed in matched pairs. Chipkill function is supported. One or two non-hot-swap SAS HDDs (may be 36, 73, or 146 GB each) in the base blade. Two full-duplex, dual Gigabit Ethernet PCI connections can use the IBM BladeCenter Memory and I/O Expansion Blade (60-mm configuration) to achieve four high-speed I/O slots. BladeCenter HS21 blade servers are designed for high throughput from processor to memory, and to bus I/O. These features, combined with SMP capability and blade-thin density, make it an excellent choice for space- and power-constrained environments used for: Web caching Collaboration Terminal serving Dynamic Web serving Firewall Telecommunications Active directory services Scientific and technical computing Linux clustering Virtualization IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 4

5 High-availability and serviceability features Hot-swap blades enable easy access to each blade server. Management module interfaces with each blade server for single systems management control. The BladeCenter HS21 blade servers deliver reliability and serviceability. Features include: High-performance ECC memory, combined with an integrated ECC memory controller, to help correct soft and hard single-bit memory errors, while minimizing disruption of service to LAN clients. Chipkill memory correction for up to four bits per DIMM to help keep your blade server up and running. Memory hardware scrubbing, designed to correct many soft memory errors automatically without software intervention. ECC L2 cache processors to help improve data reliability and reduce downtime. CPU failure recovery in Symmetric Multi-Processing (SMP) configurations: Forces failed processor offline Automatically reboots server Generates alerts Continues operations with the working processor PFA on SAS HDD options, memory, and processors to help alert the system administrator of an imminent component failure. Support for dual Gigabit Ethernet connections: Failover, adapter fault tolerance PXE 2.0 Boot Agent Wake on LAN Load balancing or teaming Integrated management processor that supports diagnostic, reset, POST, and auto-recovery functions, and monitors temperature and voltage. Alerts are generated when thresholds are exceeded (refer to the Limitations section for restrictions). BladeCenter storage and I/O expansion option The BSE-3 blade (SIO) is an option attaching via the PCI Express (PCI-E) bus to selected BladeCenter processor blades, including the HS21. When installed, this option will add one blade slot width to the width of the host processor blade it is attached to. The SIO option consists of a RAID-based storage subsystem, two I/O expansion slots for BladeCenter PCI-X adapter options, and a PCI-E unique connector to enable the installation of a High-Speed I/O Expansion Card adapter or a PCI Expansion Unit (option 25K8373). The SIO storage subsystem is a self-contained intelligent RAID solution, consisting of an I/O Processor (IOP), a cache memory, or an optional battery-backed data cache, and support for up to three SFF hot-swap Serial Attached SCSI (SAS) hard drives. The RAID subsystem is capable of annexing the SAS drives on the host blade (up to two), resulting in all local system drives (up to five) controlled by a single disk controller. To accommodate this feature, the BladeCenter PCI-E option unique interface connector is defined with two SAS links, which will be connected to the secondary ports of the SAS drives on the processor blade. Both form factors of BladeCenter PCI-X adapter options (large and small) will be supported; however, the PCI-E unique connector on the topside of the SIO Blade will allow another BladeCenter PCI-E option to be attached, such as a high-speed I/O expansion card or a PCI Expansion Unit (PEU option part number is 25K8373). Either two PCI-X adapter options (in any combination of small or large form factor) or one PCI-X adapter (large or small) and one HSDC can be supported. However, if the SIO blade is attached to an IBM BladeCenter Memory and I/O Expansion Blade, then only an HSDC is supported on the SIO. IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 5

6 Features of the BSE-3 blade include: RAID support: The SIO blade provides RAID levels 0 and 1, along with all supported RAID 0 and 1 sublevels for the drives in the SIO. Optional support (25R8064), which replaces the base RAID support, will add battery-backed data cache and support for RAID 5 and all supported RAID 5 sublevels. Hard drives: BSE-3 blade delivers three bays for hot-swap, 2.5-inch SFF SAS hard drives (39R7388, 39R7389, 43X0832). SAS interface will run at 3.0 Gbps, full duplex. Drives are mounted on hot-swap trays, and will fit side-by-side across the front of the option blade. All three drive bays must be populated with either a drive or with a blank tray insert. Drives include 36, 73, and 146 GB (39R7388, 39R7389, 43X0832) all running at 10K RPM. These drives can be mixed or matched as needed. Only drives and tray inserts released for BSE-3 blade may be used in this option. I/O expansion card option support: BSE-3 blade supports the addition of I/O expansion cards, both PCI-X and PCI-E. PCI-X Slots 1 and 2: Both slots support either legacy or SFF I/O expansion cards. Slot 1 will reside on PCI-X bus A, and the two SERDES channels from this slot will route to IBM BladeCenter Storage and I/O Expansion Blade positions 1 and 2. Slot 2 will reside on PCI-X bus B, and the two SERDES channels from this slot will route to IBM BladeCenter Storage and I/O Expansion Blade positions 3 and 4. PCI-E High-Speed I/O Expansion Card (HSDC): The HSDC options will be designed to use PCI-E link B. PCI-E attached Expansion Card (HSDC) electrically interfaces directly to the host blade that the SIO is attached to. The power budget for the HSDC option is 25-watts maximum. HSDC options supported include the Cisco 4xIB Host Channel Adapter Expansion Card (32R1760). BSE-3 blade will support a maximum of any two I/O expansion card options. Systems management IBM Director BladeCenter HS21 blade servers include IBM Director. This powerful, highly integrated systems management software solution is built on industry standards and designed for ease of use. The solution exploits your existing enterprise or workgroup management environments and uses rich security features to access and manage physically dispersed IT assets more efficiently over the Internet. It can help reduce costs through potentially: Reduced downtime Increased productivity of IT personnel and end users Reduced service and support costs IT administrators can view the hardware configuration of remote systems in detail and monitor the usage and performance of critical components, such as processors, HDDs, and memory. IBM Director can be extended with optional add-ons for advanced server management, deployment, and software distribution. All of these tools smoothly integrate into IBM Director for a consistent look-and-feel and single point of management, while taking advantage of the IBM Director monitoring, scheduling, alerting, event management, and group management IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 6

7 capabilities. Optional add-ons Capacity Manager is an optional IBM Director extension that helps optimize servers' performance and availability. It monitors the utilization of the servers' resources, helps identify existing or future bottlenecks, and makes recommendations for improvement. Its predictive, proactive capabilities help reduce downtime costs and its built-in, intelligent features optimize server throughput, utilization, and performance, maximizing server investment. Application Workload Manager extends IBM Director to enable the control of how multiple applications use server resources and helps protect against unexpected resource contention. Remote Deployment Manager (RDM) is an effective tool for the initial deployment phase of a system's life cycle with its ability to remotely send out complete software images for installation in a reboot environment. Software Distribution Premium Edition enables you to create and distribute software packages to systems on your network, helping save travel and labor costs. IBM Director also enables integration into leading workgroup and enterprise systems management environments via its Upward Integration Modules. This enables the advanced management capabilities built into xseries servers to be accessed from: Tivoli Enterprise and Tivoli NetView Computer Associates CA Unscented T.G. HP Overview Microsoft SMS BMC Patrol NetIQ For more information about IBM Director, refer to Hardware Announcement , dated September 27, SMASH Proxy With the IBM SMASH Proxy, IBM continues to deliver innovative solutions based on industry standards. The IBM SMASH Proxy software provides management of the BladeCenter through a command line protocol (CLP). This offering simplifies the management of BladeCenter, making it easier to automate datacenter operations in a standardized way. The IBM SMASH Proxy is based on the Distributed Management Task Force (DMTF) draft specification for Systems Management Architecture for Server Hardware (SMASH) and supports both the BladeCenter Management Module as well as the Advanced Management Module. The IBM SMASH Proxy provides direct access to BladeCenter management functions as an alternative to using the existing command line or Web-based user interfaces. The IBM SMASH Proxy CLP allows you to view and manage the components by issuing commands that display the management objects, and enables you to control the power and configuration of the MM and other components in the BladeCenter unit. You can also access the text-console command prompt on each blade server through a serial over local area network (LAN) (SOL) connection. Users can access the SMASH CLP interface by using a standard Telnet connection or a Secure Shell (SSH) connection, making it easy to fit into existing environments. The IBM SMASH Proxy is available to BladeCenter customers, at no additional charge, as a software download from IBM.com. Remote Deployment Manager (RDM) for BladeCenter BladeCenter can use RDM, which enables the configuration and deployment of BladeCenter HS21 blade servers within a single BladeCenter. This highly flexible and powerful tool enables you to deploy system images that include the operating system and configuration detail to one or more blade servers at one time from an IBM Director console on the network. With RDM you can: Add instructions for loading firmware or specific operating systems Deploy multiple blade servers in a BladeCenter at one time IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 7

8 Store various images on the RDM server for target server installations Restore an initial or incremental disk image locally with a few keystrokes Deploy images using drop and drag BladeCenter management module BladeCenter HS21 is supported on both the IBM BladeCenter Management Module and the newer Advanced Management Module. Use the management module in the BladeCenter to manage the BladeCenter and obtain vital system information about your installed BladeCenter HS21 servers. The management module communicates with the blade servers within the BladeCenter via an RS-485 intermanagement network. This network relays vital information about individual blade servers, such as: Voltages Power supply status Memory status Fan status HDD status Error and status log You receive status and control all blade servers within the BladeCenter. You can shut down and restart any blade server from anywhere on the network to help save time and costs associated with travel to the actual installation. These manageability functions are provided through a self-contained Web page, creating an easy and familiar way for administrators to monitor, control, and maintain high availability. Accessibility by people with disabilities A U.S. Section 508 Voluntary Product Accessibility Template (VPAT) containing details on accessibility compliance can be requested at Product positioning The BladeCenter HS21 offerings are positioned as the highest-density servers. They represent a new approach to the deployment of application servers where two-way, SMP-capable Xeon processing, high-availability design, systems management, and easy setup features are combined in an extremely dense package. The BladeCenter and BladeCenter HS21 blades can require less space and power resources because of their high-density design, reduced power requirements, and single environment systems management. This is an extremely important consideration for: Large enterprises Application service providers Scientific and technical computing businesses They are an excellent fit for applications, such as: Lotus Notes Microsoft Exchange Linux clusters IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 8

9 Reference information For information about System x3850, refer to Hardware Announcement , dated September 26, Business Partner information If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID). BP Attachment for Announcement Letter Trademarks Remote Deployment Manager and Chipkill are trademarks of International Business Machines Corporation in the United States or other countries or both. BladeCenter, ServerProven, Wake on LAN, xseries, Tivoli, NetView, and Lotus Notes are registered trademarks of International Business Machines Corporation in the United States or other countries or both. Intel is a registered trademark of Intel Corporation. Microsoft is a trademark of Microsoft Corporation. Linux is a trademark of Linus Torvalds in the United States, other countries or both. Other company, product, and service names may be trademarks or service marks of others. Publications An installation and user's guide, as well as safety and warranty publications, are shipped with each BladeCenter HS21 blade. The following publications are available immediately: Title Order number BladeCenter Solutions xseries(r) Family Brochure GM GM The BladeCenter HS21 Installation and User's Guide and Hardware Maintenance Manual, in U.S. English versions, are available from IBM Publications Center Portal The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided, as well as payment options via credit card. A large number of publications are available online in various file formats, which can currently be downloaded free of charge. Services Global Technology Services IBM Services include business consulting, outsourcing, hosting services, applications, and other IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 9

10 technology management. These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-ibm offerings. IBM is your one-stop shop for IT support needs. For details on available services, contact your IBM representative or visit For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit For details on education offerings related to specific products, visit Select your country, and then select the product as the category. xseries & BladeCenter support services Recommended core technical support: When you buy IBM xseries technology, include the support services you need to help keep both your hardware and software working for you, day after day, at peak performance. It's your first step toward helping to protect your investment and sustain high levels of system availability. We offer service-level and response-time options to fit your business needs, and we'll help you get started with a core support package that includes: Continuous system monitoring Exclusive electronic monitoring that helps speed up problem-solving with automated, early detection of potential problems and system errors. Hardware maintenance World-class remote and on-site hardware problem determination and repair services. Software technical support Unlimited help line calls for fast, accurate answers to your questions during installation and throughout ongoing operations. For more information, refer to Technical information Specified operating environment Physical specifications 8853-EQx 8853-ERx Processor Intel(R) E5310 Intel E5345 Int. speed 1.60 GHz 2.33 GHz Ext. speed 1066 MHz 1333 MHz Number standard 1 2 Maximum 2 2 L2 cache (full speed) 8 MB 8 MB L3 cache 0 MB 0 MB Memory (FBD Memory) 4 GB 4 GB DIMMs (Standard) 2x 2 GB 2x 2 GB IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 10

11 DIMM sockets 4 4 Capacity 16 GB(5) 16 GB(5) Video SVGA SVGA Memory 16 MB 16 MB Disk controller SAS SAS Channels 1 1 Connector int. 2 2 Connector ext. 0 0 RAID Yes Yes HDD 0 0 Connectors 2 2 Internal capacity 292 GB(6) 292 GB(6) Total HDD bays 2 2 PCI Slots 0 0 Management proc. Standard Standard Ethernet controller Dual GB Dual GB FC card Optional Optional DVD-ROM (IDE) 0 0 Diskette drive 0 0 Power supply EAx 8864-EBx Processor Xeon 7110N Xeon 7110N Int. speed 2.50 GHz 2.50 GHz Ext. speed 667 MHz 667 MHz Number standard 1 2 Maximum 4 4 L2 cache/core (full speed) 1 MB 1 MB L2 cache total (full speed) 2 MB 2 MB L3 cache (full speed) 4 MB 8 MB Memory (PC DDR2) 2 GB ECC 2 GB ECC DIMMs 2x 1 GB 2x 1 GB Dimm sockets std 4(7) 4(7) DIMM sockets max 16(7) 16(7) Capacity 64 GB(8) 64 GB(8) Memory Expansion Card Std 1 1 Memory Expansion Card Max 4 4 Video SVGA SVGA Memory 16 MB 16 MB SAS SCSI controller 3.0 GHz 3.0 GHz Links 6 6 Connector int. 2 2 Connector ext. 0 0 HDD 0 0 Total HDD bays 5.25-inch slim media 1 1 Hot-swap HDD 6 6 Accessible 7 7 Internal capacity GB(9) GB(9) PCI-X 2.0 slots 2 2 PCI-E x8 slots 4 4 Slots available 6 6 Management proc. BMC Standard Standard RSA-II SlimLine Optional Standard ServeRAID(TM) 8i Optional Standard Dual Ethernet 10/100/1000 Mbps 10/100/1000 Mbps controller CD-ROM / DVD Optional Optional Combo Drive Standard Standard Power supply 1300 W 1300 W Number standard 2 2 Maximum 2 2 Hot-swap Yes Yes Redundant power Standard Standard Auto restart Yes Yes (5) Total system memory capacity is based on using 4 GB memory DIMMs. This is expandable to 32 GB using the IBM BladeCenter Memory and I/O Expansion Blade option (42C1600). (6) Capacities are based on installation of two 146 GB SAS HDDs. Total capacity can be increased using the IBM IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 11

12 BladeCenter Storage and I/O Expansion Blade (39R7563), which accommodates three additional hot-swap SAS SFF HDDs and optional support for RAID 0, 1, or 5. For latest information on supported HDD options, visit (7) Number of sockets is based on installation of the four memory expansion cards (41Y5000) (8) Capacities are based on installation of the four memory expansion cards (41Y5000) and 4x4 GB DIMMs installed in each card (9) Capacities are based on installation of six GB 2.5-in SAS HDDs. For the latest information on supported HDD options, visit Video subsystem ATI RN50 (ES 1000) Video controller Integrated on the blade 16 MB embedded video memory Supported BladeCenter HS21 video resolutions CRT ISO Flat Maximum refresh CRT panel Resolution rate supported support compliance support 640 x Hz Yes Yes Yes 800 x Hz Yes Yes Yes 1024 x Hz Yes Yes Yes Note: For resolutions supported by different operating systems, refer to the operating system documentation. Dimensions BladeCenter HS21 Height: 24.5 cm (9.7 in) Depth: 44.6 cm (17.6 in) Width: 2.9 cm (1.14 in) Maximum weight: 5.4 kg (12 lb) (depending on the configuration when options are added) Electrical: BladeCenter chassis: 200 to 240 (nominal) V ac; 50 Hz or 60 Hz Electrical: BladeCenter HS21: 12.2 (nominal) V dc Japan Energy Value Tables BladeCenter HS21 Chassis BladeCenter 8677-xxx BladeCenter H 8852-xxx Blade 8853-ERx 8853-EQx 8853-ERx 8853-EQX machine type/model Power(TM) Consumption (Watts) CTP (MTOPS) Category F F F F Energy Exempt Exempt IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 12

13 consumption efficiency Input (Hz) frequency BladeCenter or BladeCenter H and BladeCenter HS21 Configuration Idling with Windows (at 25 C) 8853-EQx 8853-ERx CPU 1 CPU -- Xeon 2 CPU -- Xeon PSU 2 2 Mgt Mod. 1 standard 1 standard HDD 1 x 36 GB SAS HDD 1 x 36 GB SAS HDD DVD-ROM 1 standard 1 standard RAM 4 x 4 GB DIMMs 4 x 4 GB DIMMs Standards: This system supports or complies with the following standards: Multiprocessor Specification (MPS) 1.4. Hardware-enabled to meet the International Organization for Standardization (ISO) 9241, Part 3. Equipment approvals and safety FCC Verified to comply with Part 15 of the FCC Rules, Class A Canada ICES-003, issue 3, Class A UL Safety of Information Technology Equipment CSA C22.2 No Safety of Information Technology Equipment NOM-019 Seguridad de Equipto de Procesamiento de Datos within 30 days of planned availability Japan VCCI, Class A IEC (CB Certificate and CB Test Report) Australia and New Zealand C-Tick Mark, Class A Taiwan BSMI CNS13438, Class A within 30 days of planned availability China GB , GB , GB Korea MIC within 30 days of planned availability CE Mark (EN55022:1998 Class A, EN60950, EN55024:1998, EN and EN ) CISPR 22, Class A TUV-GS (EN60950/ISO /ISO ) FCC Verified to comply with Part 15 of the FCC Rules (Class A) prior to product delivery IEC CB Certificate and CB Test Report indicating compliance to Group Differences Standards: This system supports or complies with the following standards: Multiprocessor Specification (MPS) 1.4 Hardware-enabled to meet the International Organization for Standardization (ISO) 9241, Part 3 Equipment approvals and safety FCC Verified to comply with Part 15 of the FCC Rules, Class A Canada ICES-003, issue 3, Class A IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 13

14 UL Safety of Information Technology Equipment CSA C22.2 No Safety of Information Technology Equipment NOM-019 Seguridad de Equipto de Procesamiento de Datos within 30 days of planned availability Operating environment Temperature 10.0 to 35.0 C (50 to 95 F) at 0 to 914 m (0 to 3,000 ft) 10.0 to 32.0 C (50 to 90 F) at 914 to 2,133 m (3,000 to 7,000 ft) Relative humidity: 8% to 80% Maximum altitude: 2,133 m (7,000 ft) Hardware requirements: For attended installation of an operating system, this server requires a compatible: Keyboard Mouse Display Unattended or remote installation may be performed without requiring some or all of these components. Review your unattended software installation program information for specific hardware configuration requirements. For service, the server requires a compatible: Keyboard Mouse Display When having the unit serviced, plan to have these components attached to your server either directly or indirectly via a console switch. Software requirements Programming requirements: The following network operating systems have been tested for compatibility with the BladeCenter HS21: Microsoft Windows Server 2003, Enterprise Edition Windows Server 2003 R2, Enterprise Edition Windows Server 2003, Enterprise x64 Edition Windows Server 2003 R2, Enterprise x64 Edition Windows Server 2003, Standard Edition Windows Server 2003 R2, Standard Edition Windows Server 2003, Standard x64 Edition Windows Server 2003 R2, Standard x64 Edition Windows Server 2003, Web Edition Linux Red Hat Enterprise Linux 4 AS for x86 Red Hat Enterprise Linux 4 AS for AMD64/EM64T Red Hat Enterprise Linux 4 ES for x86 Red Hat Enterprise Linux 4 ES for AMD64/EM64T Red Hat Enterprise Linux 4 WS for x86 IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 14

15 Red Hat Enterprise Linux 4 WS for AMD64/EM64T SUSE Linux Enterprise Server 9 for x86 SUSE Linux Enterprise Server 9 for AMD64/EM64T VMware ESX Server 3.0, Version Novell NetWare 6.5 with Support Pack 5 Sun Solaris 10 For additional information, support, certification, and versions of network operating systems, access Compatibility: The BladeCenter HS21 contains licensed system programs that include set configuration, set features, and test programs. IBM system BIOS is loaded from a "flash" EEPROM into system memory. This BIOS provides instructions and interfaces designed to support the standard features of the BladeCenter HS21 and to maintain compatibility with many current software programs. For detailed information about IBM and non-ibm devices, adapters, software, and network operating systems supported with System x servers, visit Contact your IBM representative IBM Business Partner, or refer to the IBM Sales Manual for information on the compatibility of hardware and software for xseries servers. The Sales Manual is updated periodically as new features and options are announced that support these servers. Limitations The BladeCenter HS21 blades contain four DIMM sockets. A maximum of 16 GB of system memory is supported by using a 4 GB DIMM of ECC DDR memory in each of the DIMM sockets. All supported system memory is addressable through direct memory access. The BladeCenter HS21 supports currently available 512 MB, 1 GB, 2 GB, or 4 GB DIMM options. Supported DIMMs can coexist in the same server; however, memory DIMMs of the same capacity must be installed in matched pairs. Refer to the Planning information section or the xseries server Web page memory options. Microprocessors must be of the same type and clock speed on each BladeCenter HS21. Mixing microprocessors of different speeds or cache size or upgrading the base processors is not supported. The ERx and EQx models of BladeCenter HS21 are supported in the BladeCenter H chassis (8852) and the BladeCenter chassis (8677). The latest BladeCenter hardware and software compatibility is available via the Web Refer to the Software requirements section for operating system limitations. User group requirements: Limitations: Remote Deployment Manager can: Support 32-bit Windows native and clone installations Support Red Hat Enterprise Linux (RH EL) (Advanced Server) bit installations via a white paper Update BIOS, performs CMOS updates, and configures RAID controller Not support SUSE Linux Enterprise Server (SLES) 9 ServerGuide and Scripting Toolkit ServerGuide supports the installation of Windows 2000 and Windows 2003 (32 and 64 bit) Toolkit does not support the installation of Windows 64 bit NOSs IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 15

16 The Microsoft Windows Preinstallation Environment software included as part of ServerGuide software may be used for boot, diagnostic, setup, restoration, installation, configuration, and test or disaster recovery purposes only. Note: The Microsoft Windows Preinstallation Environment software contains a security feature that will cause an end user customer's system to reboot without prior notification to the end user customer after 24 hours of continuous use of the Microsoft Windows Preinstallation Environment. During routine usage of ServerGuide, which does not usually require usage of the Microsoft Windows Preinstallation Environment software for such an extended time period, this condition should not occur. Update Express is supported in 32-bit mode only. Planning information Customer responsibilities: This product is designated as customer setup. Customer setup instructions are shipped with the product. Integrated RAID-1 configuration Manufacturing instructions (MI) publication enables you to set up a RAID-1 integrated mirroring configuration. This instruction enables configuration via Odyssey (ibm.com). The MI is Integrated Mirroring SAS HDD (39R9433). Configuration information: BladeCenter HS21 blades must be installed in a BladeCenter chassis (8852 or 8677). BladeCenter configuration The BladeCenter contains 14 blade server bays supporting up to 14 hot-swap BladeCenter HS21 blades. A control panel, located at the top left of the unit, contains the following LEDs: Power good Blade location Over temperature Information General fault Processor upgrades The EQx model comes standard with one Intel Xeon processor. An additional processor may be added by purchasing a supported processor option. The optional processor must match the initial processor in each system. The following processor option is supported with the BladeCenter HS21 EQx model: Quad-Core Intel Xeon Processor E5310 (1.6GHz 1066MHz 8MB L2 Cache 80w) Upgrade Processor Option (40K1270) Memory support The following memory options are supported with BladeCenter HS21: Option description Option 1GB (2x512MB) FB-DIMM 667 MHz 39M5782 2GB (2x1GB) FB-DIMM 667 MHz 39M5785 4GB (2x2GB) FB-DIMM 667 MHz 39M5791 8GB (2x4GB) FB-DIMM 667 MHz 39M5797 Power considerations BladeCenter HS21 is supported in the BladeCenter chassis (8852 and 8677). Note: For configuration guidance, refer to IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 16

17 er/xseries/library/configtools.html Cable orders: Each BladeCenter HS21 blade contains two Gigabit Ethernet connections. An optional BladeCenter four-port Gigabit Ethernet Switch Module must be installed in the BladeCenter to support additional Ethernet connections. This Ethernet switch contains four ports with RJ-45 connectors. The RJ-45 connectors provide a 10/100/1000 Base-T interface (at either half- or full-duplex) for connecting twisted-pair cable to the Ethernet network. Cabling is not included with the server. To connect the Ethernet controller to a repeater or switch, use a UTP cable with RJ-45 connectors at both ends. For 100 Mbps or higher operation, Category 5 cabling must be used. For 10 Mbps operation, Category 3, or better, cabling must be used. Installations using the BladeCenter Fibre Channel Switch Module require short- or long-wave small form factor pluggable (SFP) options and appropriate Fibre Channel cabling. Installability: Each BladeCenter HS21 requires approximately 10 minutes for installation. Installation includes unpacking, setting up, and powering on the system. Additional time is required to install an operating system, additional options, or features. Packaging: BladeCenter HS21 Product Package description Boxes BladeCenter HS21 BladeCenter HS21 Carton 1 Contents: BladeCenter HS21 1 Publications/CD Package 1 BladeCenter HS21 Publications Package 1 Contents: Installation and User's Guide Documentation CD-ROM (softcopy of publications) Broadcom CD-ROM Safety flyer Blade ID labels Standard form factor I/O Expansion card tray kit The BladeCenter HS21 blades are shipped in a single package. The approximate shipping dimensions and weight are: Single pack dimensions: x 3.13 x 6.13 in Single pack weight: 9.2 lb Related options Processor upgrades Quad-Core Intel Xeon Processor E5310 (1.6GHz 1066MHz 8MB L2 Cache 80w) Upgrade Processor Option 40K1270 Quad-core Intel Xeon Processors Heat sink Installation publications/warranty Supplies: For end users For information about Priority Fulfillment Services distribution channels, call in Japan or outside of Japan. For information about Priority Fulfillment Services Europe distribution channels, call Other country-specific numbers can be found at IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 17

18 Security, auditability, and control Security and auditability features include: A power-on password function provides control of who has access to the data and server setup program on the server. A set unattended boot mode allows the system keyboard to be locked to all entries except the password and at the same time allows other computers on the network to access the system disk drive. A selectable boot sequence can be used to prevent unauthorized installation of software or removal of data from the diskette drive. The BladeCenter HS21 blades have no security intrusion detection. Therefore, they should be installed in a rack environment that provides security through lockable doors or other security measures. It is the client's responsibility to ensure that the server is secure to protect sensitive data. The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities. IBM Electronic Services IBM has transformed its delivery of hardware and software support services to help you achieve higher system availability. Electronic Services is a Web-enabled solution that offers an exclusive, no-additional-charge enhancement to the service and support available for IBM servers. These services are designed to provide the opportunity for greater system availability with faster problem resolution and preemptive monitoring. Electronic Services comprises two separate, but complementary, elements: Electronic Services news page and Electronic Services Agent. The Electronic Services news page is a single Internet entry point that replaces the multiple entry points traditionally used to access IBM Internet services and support. The news page enables you to gain easier access to IBM resources for assistance in resolving technical problems. The Electronic Service Agent is no-additional-charge software that resides on your server. It monitors events and transmits system inventory information to IBM on a periodic, client-defined timetable. The Electronic Service Agent automatically reports hardware problems to IBM. Early knowledge about potential problems enables IBM to deliver proactive service that may result in higher system availability and performance. In addition, information collected through the Service Agent is made available to IBM service support representatives when they help answer your questions or diagnose problems. Installation and use of IBM Electronic Service Agent for problem reporting enables IBM to provide better support and service for your IBM server. To learn how Electronic Services can work for you, visit Terms and conditions IBM credit corporation financing: Yes To obtain copies of the IBM Statement of Limited Warranty, contact your reseller or IBM. In the United States, call 800-IBM-SERV ( ), or write to: Warranty Information P.O. Box Research Triangle Park, NC Attn: Dept. JDJA/B203 IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 18

19 Warranty period Three years Optional IBM features initially installed in an IBM machine carry the same warranty period as the machine. If installed after the initial machine installation, they carry the balance of the machine warranty or the optional feature warranty, whichever is greater. Warranty service: If required, IBM provides repair or exchange service depending on the type of warranty service specified below for the machine. IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. Service levels are response time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations, additional charges may apply outside IBM's normal service area, contact your local IBM representative or your reseller for country and location specific information. Customer Replaceable Unit (CRU) (for example, keyboard, mouse, speaker, memory, hard disk drive) service and on-site service. CRU service: IBM provides a replacement CRU to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM at any time on your request. A CRU is designated as being either a Tier 1 or a Tier 2 CRU. Installation of a Tier 1 CRU is your responsibility. If IBM installs a Tier 1 CRU, at your request, you will be charged for the installation. You may install a Tier 2 CRU yourself or request IBM to install it, at no additional charge, under the type of warranty service specified below, on-site service. Based upon availability, a CRU will be shipped for next business day (NBD) delivery. IBM specifies in the materials shipped with a replacement CRU whether a defective CRU must be returned to IBM. When return is required, return instructions and a container are shipped with the replacement CRU, and you may be charged for the replacement CRU if IBM does not receive the defective CRU within 15 days of your receipt of the replacement. The following have been designated as a Tier 1 CRU: Battery Blank filler Hard disk drive Lift handle kit Memory DIMM Memory expansion card Optical drive PCI adapter PCI divider Service label System label Top cover Voltage regulator module On-site service: On-site repair, 9 hours per day, Monday through Friday excluding holidays, NBD response. IBM or your reseller will repair the failing machine at your location and verify its operation. You must provide suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose. On-site service is not available in all countries, and some countries have kilometer or mileage limitations from an IBM service center. In those locations where on-site service is not available, the normal in-county service delivery is used. Call IBM at 800-IBM-SERV ( ), to assist with problem isolation for hardware to determine if warranty service is required. Telephone support may be subject to additional charges, even during the limited warranty period. IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 19

20 International Warranty Service: International Warranty Service (IWS) is available in selected countries or regions. The warranty service type, for example, on-site repair and customer replaceable unit, and service level, 9x5 NBD and 24x7, provided in the servicing country may be different from that provided in the country in which the machine was purchased. Under IWS, warranty service will be provided with the prevailing warranty service type and service level available for the IWS-eligible machine type in the servicing country and the warranty period observed will be that of the country in which the machine was purchased. To determine the eligibility of your machine and to view a list of countries where service is available, visit c/systems/support/supportsite.w ss/warrantyform?brandind= For more information on IWS, refer to Services Announcement , dated September 25, Programs included with this product are licensed under the terms and conditions of the License Agreements that are shipped with the system. Maintenance services ServicePac, ServiceSuite, ServiceElect, and ServiceElite: ServicePac, ServiceSuite, ServiceElect, and ServiceElite provide hardware warranty service upgrades, maintenance, and selected support services in one agreement. Warranty service upgrade: During the warranty period, a warranty service upgrade provides an enhanced level of on-site service for an additional charge. A warranty service upgrade must be purchased during the warranty period and is for a fixed term (duration). It is not refundable or transferable and may not be prorated. If required, IBM will provide the warranty service upgrade enhanced level of on-site service acquired by the customer. Service levels are response time objectives and are not guaranteed. IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. CRUs will be provided as part of the machine's standard warranty CRU service except that you may install a Tier 1 CRU yourself or request IBM installation, at no additional charge, under one of the on-site service levels specified below. IBM will repair the failing machine at your location and verify its operation. You must provide suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose. Refer to Prices section for specific offerings. Maintenance service: If required, IBM provides repair or exchange service depending on the type of maintenance service specified below for the machine. IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. Service levels are response time objectives and are not guaranteed. CRU service: If your problem can be resolved with a CRU (for example, keyboard, mouse, speaker, memory, hard disk drive), IBM will ship the CRU to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM at any time on your request. IBM specifies in the materials shipped with a replacement CRU whether a defective CRU must be returned to IBM. When return is required, return instructions and a container are shipped with the replacement CRU, and you may be charged for the replacement CRU if IBM does not receive the defective CRU within 15 days of your receipt of the replacement. On-site service: IBM will repair the failing machine at your location and verify its operation. You IBM United States Announcement IBM is a registered trademark of International Business Machines Corporation 20