EX120/121/122 Series Some protocols are not CE-compliant.

Transcription

1 Output type for solenoid valves (For Output) EX120/121/122 Series Compatible Protocols CompoBus/S NKE Corp.: Fieldbus H System Made to Order Small unit compatible with a maximum of 16 outputs Compatible with a variety of communication networks EX120 Series S-Link V Manifold Solenoid Valves SV1000/2000/3000/4000 VQ1000/2000 SY3000/5000/7000 * Some protocols are not CE-compliant. Refer to How to Order. EX600 EX500 EX123/124/126 EX260 D D D D D D EX121 Series SY3000/5000 EX122 Series SY3000/5000 EX250 EX120/121/122 EX245 CONTENTS Output type for solenoid valves (For Output) EX120/121/122 Series EX120 EX121 EX122 How to Order SI Unit p. 173 Specifications p. 174 Dimensions/Parts Description p. 175 LED Indicator p. 178 Accessories q Communication Connector p. 179 w Power Supply Connector p. 179 Made to Order qdevicenet TM PNP (Negative common) output, Occupied points: 16 inputs/16 outputs p. 179 wdevicenet TM PNP (Negative common) output, Occupied points: 0 inputs/16 outputs p. 179 e S-LINK V compatible NPN (Positive common) 16 outputs p. 179 Specific Product Precautions p ATEX M8/M12 EX510 EX180 EX140

2 For Output EX120/121/122 Series Some protocols are not CE-compliant. How to Order SI Unit EX12 0 S DN1 Valve interface 0 Plug-in 1 Flat ribbon cable DIN rail mounting 2 Plug-in DIN rail mounting Made to Order (Refer to page 179.) Protocol Output polarity Occupied points DeviceNet DeviceNet S-LINK V PNP (Negative common) PNP (Negative common) NPN (Positive common) 16 inputs/ 16 outputs 0 inputs/ 16 outputs 0 inputs/ 16 outputs Protocol CE-compliant DN1 DeviceNet 1 DN1-X26 2 DeviceNet 1 MJ1 CC-Link CS1 OMRON Corp.: CompoBus/S (16 outputs) CS2 OMRON Corp.: CompoBus/S (8 outputs) UH1 NKE Corp.: Fieldbus H System CM1 CompoNet NPN (Positive common) CM3 CompoNet PNP (Negative common) 1 DN1 s occupied points are 16 inputs and 16 outputs, while DN1-X26 has 0 inputs and 16 outputs. 2 A manifold part number is not specified for this model. Please contact SMC for the manifold integrated type. 173

3 For Output EX120/121/122 Series Specifications Common Specifications Communication Terminating resistor Not provided Internal current consumption (Unit) 100 ma or less Enclosure IP20 Environment Communication Operating temperature range Operating humidity range Withstand voltage Insulation resistance Model EX12 -SDN1 EX12 -SDN1-X26 EX12 -SMJ1 EX12 -SCS1 EX12 -SCS2 Protocol DeviceNet CC-Link OMRON Corp.: CompoBus/S Version 1 Release 2.0 Ver Communication speed 125 k/250 k/500 kbps 156 k/625 kbps 2.5 M/5 M/10 Mbps Configuration file 2 EDS file CSP+ file I/O occupation area (Inputs/Outputs) 0 to 55 C (Valve 8 points ON) 0 to 50 C (Valve 16 points ON) 35 to 85%RH (No condensation) 1500 VAC for 1 minute between whole external terminal and enclosure 2 MΩ or more (500 VDC) between whole external terminal and enclosure 16/16 0/16 32/32 (1 station, remote I/O stations) 750 kbps SCS1: 0/16 SCS2: 0/8 Power supply For control 11 to 25 VDC 15 to 30 VDC 14 to 26.4 VDC voltage For valve 24 VDC +10%/ 5% Output type Sink/NPN (Positive common) SCS1: 16 points Number of outputs 16 points SCS2: 8 points Output Load Solenoid valve with surge voltage suppressor 24 VDC, 2.1 W or less (SMC) Fail safe CLEAR HOLD/CLEAR HOLD/CLEAR CLEAR (Switch setting) (Switch setting) Standards CE marking Weight EX120: 110 g or less, EX121: 140 g or less, EX122: 130 g or less Accessory Communication connector 1 pc., Power supply connector 1 pc. 1 Please note that the version is subject to change. 2 The setting file can be downloaded from the SMC website, EX250 EX245 EX600 EX500 EX123/124/126 EX260 Model EX12 -SUH1 EX12 -SCM1 EX12 -SCM3 Protocol NKE Corp.: Fieldbus H System CompoNet Communication Communication speed 29.4 kbps kbps/1.5 M/3 M/4 Mbps Configuration file EDS file 1 I/O occupation area (Inputs/Outputs) 0/16 Power supply For control 24 VDC ±10% 14 to 26.4 VDC voltage For valve (Common power supply) 24 VDC +10%/ 5% Output type Sink/NPN (Positive common) Sink/NPN (Positive common) Source/PNP (Negative common) Output Number of outputs 16 points Load Solenoid valve with surge voltage suppressor 24 VDC, 2.1 W or less (SMC) Fail safe CLEAR HOLD/CLEAR (Setting via network) Standards CE marking Weight EX120: 110 g or less EX121: 140 g or less EX122: 130 g or less EX120: 100 g or less EX121: 120 g or less EX122: 110 g or less (including accessory) Accessory Power supply connector (EX9-CP2) 1 pc. 2 1 The setting file can be downloaded from the SMC website, 2 Communication connector (for the opposite side) is not provided. EX510 EX180 EX140 EX120/121/122 ATEX M8/M12 174

4 PWR(V) MS EX120/121/122 Series Dimensions/Parts Description EX120 EX120-SDN1(-X26) EX120-SMJ1, SCS, SUH1 Terminal block cover Terminal block cover Power supply connector Communication connector Screw terminal block EX120-SCM Terminal block cover NS SETTINGS 10 1 OUT 24V 0V FG BS+ BDH BDL BS- 5.4 Power supply connector Communication connector

5 PWR(V) MS For Output EX120/121/122 Series Dimensions/Parts Description EX121 EX121-SDN1(-X26) EX121-SMJ1, SCS, SUH1 Position indicator LED EX260 Terminal block cover Terminal block cover EX123/124/ Power supply connector MIL connector (20 pins, socket) Communication connector Tightening torque 0.6 N m MIL connector (20 pins, socket) Screw terminal block Tightening torque 0.6 N m EX245 EX500 EX DIN rail mounting bracket DIN rail mounting bracket EX250 EX121-SCM Position indicator LED Terminal block cover EX120/121/122 SETTINGS NS OUT V 0V FG BS+ BDH BDL BS- EX140 Power supply connector MIL connector (20 pins, socket) EX Communication connector Tightening torque 0.6 N m EX510 M8/M DIN rail mounting bracket ATEX 176

6 BS- EX120/121/122 Series Dimensions/Parts Description EX122 EX122-SDN1(-X26) EX122-SMJ1, SCS, SUH1 Terminal block cover Terminal block cover Power supply connector 5.4 Communication connector 6.2 Screw terminal block Tightening torque 0.6 N m Tightening torque 0.6 N m DIN rail mounting bracket DIN rail mounting bracket EX122-SCM Terminal block cover PWR(V) MS NS SETTINGS 10 1 OUT 24V 0V FG BS+ BDH BDL Power supply connector Communication connector Tightening torque 0.6 N m 64 DIN rail mounting bracket

7 TM For Output EX120/121/122 Series LED Indicator EX12 -SDN1 EX12 -SMJ1 PWR: Power supply for control MOD/NET: Connection state PW: Power supply for control LRUN: Communication state EX260 24V MOD/NET PWR SERIAL UNIT 0V V- SETTINGS 1 0 MODELSQ(SI No.EX120-SDN1) CANL FG CANH V+ SD RD SMC SERIAL UNIT 24V 0V +24V 24G LERR. B RATE PW LRUN STATION NO DA DB DG FG EX123/124/126 LERR: Error RD: Data reception SD: Data transmission EX500 EX12 -SCS EX12 -SUH1 PWR: Power supply for control COMM: Communication state ERR: Communication error POWER: Power supply for control COMM: Communication state EX245 BS+ ADDRESS NO. PWR COMM ERR 1 0 SERIAL UNIT BDH BDL BS- FG 24V 0V No. 24V POWER SEND SERIAL UNIT 0V D G ADDRESS ON OFF MODEL SH (SINO.EX120-SUH1) D G 24V 0V EX12 -SCM PWR(V): Power supply for valve MS: SI unit state NS: Network error PWR(V) MS NS WORD NODE ADDRESS 10 1 OUT 24V 0V FG BS+ BDH BDL BS- ATEX EX140 EX250 EX120/121/122 EX600 EX180 EX510 M8/M12 178

8 EX120/121/122 Series Accessories (For EX12 -SCM ) q Communication Connector Press-in connector for flat cables Use this connector for the standard dedicated flat cable. The communication connector does not come with this product. EX9-CCM1 Black Cable identification label (Flat cable: Black, Blue, White, Red) w Power Supply Connector Straight type power supply connector This connector is supplied at the time of shipment. EX9-CP2 Lock lever Terminal block connector for round cables (VCTF) Use this connector for the VCTF cable. The communication connector does not come with this product. EX9-CCM2 T-branch type power supply connector This connector is not supplied at the time of shipment. EX9-CP3 Lock lever Cable identification label (Flat cable: Black, Blue, White, Red) Black Made to Order Please contact SMC for detailed specifications and lead times. Prepare the SI unit and manifold valve (without SI unit) separately, and combine them before use. qdevicenet PNP (Negative common) output, Occupied points: 16 inputs/16 outputs EX12 0 -SDN1-X2 Valve interface 0 Plug-in 1 Flat ribbon cable DIN rail mounting 2 Plug-in DIN rail mounting wdevicenet PNP (Negative common) output, Occupied points: 0 inputs/16 outputs EX12 0 -SDN1-X77 Valve interface 0 Plug-in 1 Flat ribbon cable DIN rail mounting 2 Plug-in DIN rail mounting Dimensions are the same as those of the standard type. Dimensions are the same as those of the standard type. e S-LINK V compatible NPN (Positive common) 16 outputs EX120-SSL1-X99 Dimensions are the same as those of the CC-Link (EX120-SMJ1). Specific Product Precautions Be sure to read this before handling the products. Refer to page 277 for safety instructions. For fieldbus system precautions, refer to pages 278 to 280 and the Operation Manual on the SMC website: A Operating Environment Warning 1. Do not use this product in the presence of dust, particles, water, chemicals, and oil. Use around such materials is likely to cause a malfunction or breakage. 179 Trademark DeviceNet is a trademark of ODVA. CompoNet is a trademark of ODVA.

9 Output type for solenoid valves (For Output) EX124), IP67 (EX126) Enclosure IP65 (EX123, Maximum 16 outputs EX124 Series VQ2000/4000/5000 VQ2000/4000/5000 EX123 Series EX600 Manifold Solenoid Valves EX126 Series SV1000/2000/3000 VQC1000/2000/4000/5000 EX124 EX126 Accessories q Replacement Fuse w Drip Proof Plug Assembly p. 52 p. 52 Made to Order q DeviceNet PNP (Negative common), Occupied points: 16 inputs/16 outputs w DeviceNet PNP (Negative common), Occupied points: 0 inputs/16 outputs e CompoNet r Signal Cut Block Specific Product Precautions p. 53 p. 53 p. 53 p. 53 p EX140 EX510 EX123 p. 49 p. 50 p. 51 p. 52 M8/M12 (For Output) EX123/124/126 Series How to Order SI Unit Specifications Dimensions/Parts Description LED Indicator ATEX Output type for solenoid valves CONTENTS EX180 EX120/121/122 EX250 SY3000/5000/7000 EX500 Made to Order EX245 CompoBus/S NKE Corp.: Fieldbus H System nly the EX124 * O and EX126 series are CE-compliant. Compatible Protocols EX123/124/126 EX260 EX123/124/126 Series

10 For Output EX123/124/126 Series How to Order SI Unit * Only the EX124 and EX126 series are CEcompliant. EX12 3 U S UH1 3 Unit specifications Common power supply of control and valve Enclosure IP65 Compatible with the VQ valves Protocol CE-compliant UH1 NKE Corp.: Fieldbus H System U D Mounting specifications Mount a unit to the U side of the manifold Mount a unit to the D side of the manifold EX12 4 U S DN1 4 Unit specifications Separate power supply of control and valve Enclosure IP65 Compatible with the VQ valves U D Mounting specifications Mount a unit to the U side of the manifold Mount a unit to the D side of the manifold Made to Order (Refer to page 53.) Protocol Output polarity Occupied points DeviceNet DeviceNet PNP (Negative common) PNP (Negative common) 16 inputs/ 16 outputs 0 inputs/ 16 outputs Protocol CE-compliant DN1 DeviceNet *1 DN1-X26 DeviceNet *1 MJ1 CC-Link CS1 OMRON Corp.: CompoBus/S (16 outputs) CS2 OMRON Corp.: CompoBus/S (8 outputs) *1 DN1 s occupied points are 16 inputs and 16 outputs, while DN1-X26 has 0 inputs and 16 outputs. EX12 6 D S MJ1 6 Unit specifications Separate power supply of control and valve Enclosure IP65 Compatible with the SY/SV/VQC valves D Mounting specifications Mount a unit to the D side of the manifold Protocol CE-compliant MJ1 CC-Link 49

11 For Output EX123/124/126 Series Specifications Common Specifications Communication Terminating resistor Not provided Internal current consumption (Unit) 100 ma or less Output Output type Sink/NPN (Positive common) Load Solenoid valve with surge voltage suppressor 24 VDC, 2.1 W or less (SMC) Operating temperature 0 to 55 C (Valve 8 points ON) range 0 to 50 C (Valve 16 points ON) Environmental Operating humidity range 35 to 85%RH (No condensation) resistance Withstand voltage 1500 VAC for 1 minute between whole external terminal and enclosure Insulation resistance 2 MΩ or more (500 VDC) between whole external terminal and enclosure Weight 240 g or less Accessory 4 unit mounting screws (M4 x 10) EX260 EX123/124/126 Model EX123 -SUH1 EX124 -SDN1 EX124 -SDN1-X26*3 Applicable Protocol NKE Corp.: Fieldbus H System DeviceNet DeviceNet system Version*1 Release 2.0 Communication Communication speed 29.4 kbps 125 k/250 k/500 kbps Configuration file*2 EDS file I/O occupation area (Inputs/Outputs) 0/16 16/16 0/16 Power supply For control 24 VDC ±10% 11 to 25 VDC voltage For valve (Common power supply) 24 VDC +10%/ 5% Number of outputs 16 points Output Fail safe CLEAR HOLD/CLEAR (Switch setting) Environment Enclosure IP65 Standards CE marking Communication Model Applicable system EX124 -SMJ1 EX124 -SCS1 EX124 -SCS2 EX126D-SMJ1 Protocol CC-Link OMRON Corp.: CompoBus/S CC-Link Version*1 Ver Ver Communication speed 156 k/625 kbps 2.5 M/5 M/10 Mbps 750 kbps 156 k/625 kbps 2.5 M/5 M/10 Mbps Configuration file*2 CSP+ file CSP+ file I/O occupation area (Inputs/Outputs) 32/32 (1 station, remote I/O stations) SCS1: 0/16 SCS2: 0/8 32/32 (1 station, remote I/O stations) Power supply For control 15 to 30 VDC 14 to 26.4 VDC 15 to 30 VDC voltage For valve 24 VDC +10%/ 5% SCS1: 16 points Number of outputs 16 points Output SCS2: 8 points 16 points Fail safe CLEAR HOLD/CLEAR (Switch setting) CLEAR Environment Enclosure IP65 IP67 Standards CE marking *1 Please note that the version is subject to change. *2 The setting file can be downloaded from the SMC website, *3 Since this is a special product, a manifold part number is not specified. Please consult SMC for the manifold integrated type. * For detailed specifications other than the above, refer to the operation manual that can be downloaded from SMC website, ATEX M8/M12 EX180 EX140 EX120/121/122 EX250 EX245 EX600 EX500 EX510 50

12 EX123/124/126 Series Dimensions/Parts Description EX123 -S, EX124 -S Wiring entry (There is no case for the EX123 type.) Screw terminal block Housing cover Housing cover diagram 19 (72.5) EX123 : 2 x G1/2 EX124 : 4 x G1/2 Wiring entry * The housing cover of the EX124U/D-SMJ1 is the same as that of the EX126D-SMJ1. EX126D-SMJ1 Screw terminal block 114 Housing cover diagram Housing cover (72.5) Power supply fuse for valve EX9-FU x G1/2 Wiring entry Power supply fuse for control EX9-FU Housing bottom diagram

13 For Output EX123/124/126 Series LED Indicator EX123m-SUH1 EX124m-SDN1 SEND: Transmission state POWER: Power supply for control MOD/NET: Connection state PWR: Power supply for control EX123/124/126 EX124m-SMJ1 EX124m-SCSm EX500 RD: Data reception SD: Data transmission LERR: Error EX126D-SMJ1 LRUN: Communication state PW: Power supply for control ERR: Communication error PWR: Power supply for control COMM: Communication state EX250 PW: Power supply for control LERR: Error LRUN: Communication state SD: Data transmission RD: Data reception Accessories q Replacement Fuse A replacement fuse for the EX126D-SMJ1 EX9-FU20 Applicable model EX126D-SMJ1 Rated current 2.0 A Fuse w Drip Proof Plug Assembly Use when the wiring entry (G1/2) is not being used. Incorrect handling of the wiring entry may allow foreign matter to enter the SI unit, which will lead to a malfunction and damage to the SI unit. AXT100-B04A ATEX EX180 EX140 EX120/121/122 EX510 M8/M12 EX245 EX600 EX260 52

14 EX123/124/126 Series Made to Order q DeviceNet PNP (Negative common), Occupied points: 16 inputs*1 /16 outputs EX124 U -SDN1-X2 Mounting specifications U Mount a unit to the U side of the manifold D Mount a unit to the D side of the manifold Dimensions are the same as those of the standard type. Please contact SMC for detailed specifications and lead times. Prepare the SI unit, signal cut block, and manifold valve (without SI unit) separately, and combine them before use. *1 The SI unit cannot be connected to an input device but occupies memory areas of 16 input points (2 bytes) as a mirror function of output data. The mirror function is used to transmit output data received by the SI unit as input data exactly as it is. w DeviceNet PNP (Negative common), Occupied points: 0 inputs/16 outputs EX124 U -SDN1-X77 Mounting specifications U Mount a unit to the U side of the manifold D Mount a unit to the D side of the manifold Dimensions are the same as those of the standard type. ecomponet Please contact SMC for details. rsignal cut block EX9-SC1-8 A switch unit that forcibly turns OFF the output signal to the valve by means of a toggle switch operation in double 1-station units Open the switch guard to prevent misoperation, and then carry out the operation. It comes with a safety mechanism which returns the switch to the normal position (AUTO) after the switch guard is closed. Enclosure: IP67 Example of connections Switch Connector connection Cover open Hook Switch guard (Part no.: EX9- HCDSC1-X42) VQC valve Signal cut block (EX9-SC1-8) SI unit EX126 (CC-Link compliant) Press the lever to open the switch guard. To close the switch guard, press the lever and attach the hook. Cover closed Switch guard (Part no.: EX9- HCDSC1-X42) Specific Product Precautions Be sure to read this before handling the products. Refer to page 277 for safety instructions. For fieldbus system precautions, refer to pages 278 to 280 and the Operation Manual on the SMC website: smcworld.com Trademark DeviceNet is a trademark of ODVA. CompoNet is a trademark of ODVA. A 53 Operating Environment Caution 1. Select the proper type of enclosure according to the operating environment. IP65/67 is achieved when the following conditions are met. 1) Provide appropriate wiring between all units using electrical wiring cables and communication connectors cables. 2) For wiring, use a G1/2 cable gland. 3) Appropriately mount each unit and valve manifold. 4) Be sure to install a drip proof plug assembly (AXT100-B04A) on each unused connector. This is to prevent the risk of the SI unit malfunctioning or breaking down. If using in an environment that is exposed to water splashes, please take measures such as using a cover.

15 Output type for solenoid valves (For Output) EX140 Series Compatible Protocols CompoBus/S NKE Corp.: Fieldbus H System Thinner unit with low height Maximum 16 outputs Some protocols are not CE-compliant. Refer to How to Order. SZ3000 Manifold Solenoid Valves SQ1000/2000 EX140 EX120/121/122 EX500 EX123/124/126 EX260 EX250 EX600 EX245 CONTENTS Output type for solenoid valves (For Output) EX140 Series How to Order SI Unit p. 181 Specifications p. 181 Dimensions/Parts Description p. 182 LED Indicator p. 183 Specific Product Precautions p. 183 ATEX M8/M12 EX510 EX

16 For Output EX140 Series Some protocols are not CE-compliant. How to Order SI Unit EX140 S DN1 Protocol CE-compliant DN1 DeviceNet MJ1 CC-Link CS1 OMRON Corp.: CompoBus/S (16 outputs) CS2 OMRON Corp.: CompoBus/S (8 outputs) UH1 NKE Corp.: Fieldbus H System Specifications Communication Power supply voltage EX140-SCS1 EX140-SCS2 Protocol DeviceNet CC-Link OMRON Corp.: CompoBus/S Version 1 Release 2.0 Ver k/250 k/500 kbps 156 k/625 kbps 2.5 M/5 M/10 Mbps Model EX140-SDN1 EX140-SMJ1 Applicable system Communication speed EX140-SUH1 NKE Corp.: Fieldbus H System 750 kbps 29.4 kbps Configuration file 2 EDS file CSP+ file I/O occupation area (Inputs/Outputs) Terminating resistor 0/16 32/32 (1 station, remote I/O stations) Not provided SCS1: 0/16 SCS2: 0/8 For control 11 to 25 VDC 15 to 30 VDC 14 to 26.4 VDC 24 VDC ±10% For valve 24 VDC +10%/ 5% (Common power supply) 100 ma or less Output type Sink/NPN (Positive common) Number of outputs 16 outputs SCS1: 16 outputs SCS2: 8 outputs 16 outputs Load Solenoid valve with surge voltage suppressor 24 VDC, 2.1 W or less (SMC) Fail safe HOLD/CLEAR (Switch setting) CLEAR Enclosure IP20 Internal current consumption (Unit) Output Environmental resistance Operating temperature range Operating humidity range Withstand voltage Insulation resistance 0 to 55 C (Valve 8 points ON) 0 to 50 C (Valve 16 points ON) 35 to 85%RH (No condensation) 1500 VAC for 1 minute between whole external terminal and enclosure 2 MW or more (500 VDC) between whole external terminal and enclosure Standards CE marking Weight 80 g or less Communication connector 1 pc., Accessory Power supply connector 1 pc. 1 Please note that the version is subject to change. 2 The setting file can be downloaded from SMC website, For detailed specifications other than the above, refer to the operation manual that can be downloaded from SMC website, 0/16 181

17 For Output EX140 Series Dimensions/Parts Description EX140-SDN (11.5) 34.4 (36) Power supply connector Communication connector EX140-SMJ1, SCS, SUH M3 Screw terminal block 34.4 ATEX M8/M12 EX510 EX500 EX600 EX250 EX120/121/122 EX140 EX180 EX245 EX123/124/126 EX

18 TM EX140 Series LED Indicator EX140-SDN1 EX140-SMJ1 POWER: Power supply for control MOD/NET: Connection state PWR: Power supply for control L RUN: Communication state SERIAL UNIT EX140-SDN1 POWER MOD/NET SETTINGS SERIAL UNIT PWR. L RUN L ERR. SD RD B RATE STATION No. 24V 0V V- CAN L FG CAN H V+ 24V V +24V 24G DA DB DG FG Solenoids L ERR: Error RD: Data reception SD: Data transmission EX140-SCS EX140-SUH1 PWR: Power supply for control COMM: Communication state ERR: Communication error POWER: Power supply for control SEND: Communication state SERIAL UNIT EX140-SCS1 PWR. COMM ERR. ADDRESS No. SERIAL UNIT EX140-SUH1 POWER SEND ADDRESS BS+ BDH BDL BS- FG 24V 0V 24V 0V D G D G 24V 0V No. Specific Product Precautions Be sure to read this before handling the products. Refer to page 277 for safety instructions. For fieldbus system precautions, refer to pages 278 to 280 and the Operation Manual on the SMC website: Operating Environment Warning 1. Do not use this product in the presence of dust, particles, water, chemicals, and oil. Use around such materials is likely to cause a malfunction or breakage. 183 Trademark DeviceNet is a trademark of ODVA.

19 Output type for solenoid valves (For Output) EX180 Series Compatible Protocols Made to Order AnyWireASLINK Thinner unit with low height Maximum 32 outputs Manifold Solenoid Valves Only the SJ valve is UL-compliant. SJ2000/3000 S0700 EX140 EX500 EX123/124/126 EX260 EX120/121/122 EX250 EX600 EX245 CONTENTS Output type for solenoid valves (For Output) EX180 Series How to Order SI Unit p. 185 Specifications p. 185 Dimensions/Parts Description p. 186 LED Indicator p. 187 Accessories q Communication Connector p. 187 w Power Supply Connector p. 187 Made to Order qethercat PNP (Negative common), 32 outputs p. 188 wanywireaslink NPN (Positive common), 32 outputs p. 188 Specific Product Precautions p ATEX M8/M12 EX510 EX180

20 For Output EX180 Series Only the SJ valve is UL-compliant. How to Order SI Unit EX180 S DN3 Specifications DN3 DN4 DN5 DN6 MJ3 MJ5 Protocol DeviceNet (32 points Sink/NPN (Positive common)) DeviceNet (16 points Sink/NPN (Positive common)) DeviceNet (32 points Source/PNP (Negative common)) DeviceNet (16 points Source/PNP (Negative common)) CC-Link (32 points Sink/NPN (Positive common)) CC-Link (32 points Source/PNP (Negative common)) Made to Order (Refer to page 188.) Protocol EtherCAT AnyWireASLINK Communication connector type Nil T-branch type A Straight type Communication and power supply connectors are included. Communication Model EX180-SDN3 EX180-SDN4 EX180-SDN5 EX180-SDN6 EX180-SMJ3 Applicable Protocol DeviceNet CC-Link system Version 1 Release 2.0 Ver Communication speed 125 k/250 k/500 kbps 156 k/625 kbps 2.5 M/5 M/10 Mbps Configuration file 2 EDS file CSP+ file I/O occupation area (Inputs/Outputs) SDN3: 0/32 SDN4: 0/16 SDN5: 0/32 SDN6: 0/16 32/32 (1 station) EX180-SMJ5 Terminating resistor Not provided Built into the unit (Switch setting, 110 W) Power supply For control 11 to 25 VDC 24 VDC ±10% voltage For valve 24 VDC ±10%/ 5% Internal current consumption (Unit) 0.1 A or less Output type Sink/NPN (Positive common) Source/PNP (Negative common) Sink/NPN (Positive common) Source/PNP (Negative common) Output Environmental resistance Standards Weight Accessory Number of outputs Load SDN3: 32 outputs SDN4: 16 outputs SDN5: 32 outputs SDN6: 16 outputs SJ2000/3000, S0700 series manifold valves 32 outputs Fail safe HOLD/CLEAR (Switch setting) Enclosure IP20 Operating temperature range 10 to 50 C Operating humidity range 35 to 85%RH (No condensation) Withstand voltage 500 VAC for 1 minute between whole external terminal and FG Insulation resistance 10 MW or more (500 VDC) between whole external terminal and FG CE marking, UL (CSA) 110 g or less (including accessory) Communication connector 1 pc., Power supply connector 1 pc. Communication connector 1 pc., Power supply connector 2 pcs. 1 Please note that the version is subject to change. 2 The setting file can be downloaded from SMC website, For detailed specifications other than the above, refer to the operation manual that can be downloaded from SMC website, The EX180-SDN1l/2l cannot be mounted on the manifold for the EX180-SDN3l/4l/5l/6l. Additionally, the EX180-SDN3l/4l/5l/6l cannot be mounted on the manifold for the EX180-SDN1l/2l. The EX180-SMJ1l cannot be mounted on the manifold for the EX180-SMJ3l/5l. Additionally, the EX180-SMJ3l/5l cannot be mounted on the manifold for the EX180-SMJ1l. 185

21 For Output EX180 Series Dimensions/Parts Description EX180-SDN Communication connector Power supply connector (For valve) (39.7) 30.9 EX500 EX123/124/126 EX260 M3 Ground terminal Before mounting connector (accessory) EX245 EX180-SMJ Communication connector Power supply connector (For control) EX120/121/ EX140 EX250 EX Power supply connector (For valve) EX180 (39.7) 30.9 M3 Ground terminal Before mounting connector (accessory) EX510 ATEX M8/M12 186

22 EX180 Series LED Indicator EX180-SDN EX180-SMJ PWR(V): Power supply for valve PWR: Power supply for control PWR(V): Power supply for valve PWR: Power supply for control MNS: Connection state L RUN: Communication state L RUN: Error Accessories q Communication Connector Connector for the network cable This connector is supplied at the time of shipment. EX180-C DN 1 w Power Supply Connector Connector for power supply This connector is supplied at the time of shipment. EX180-CP1 Communication protocol DN For EX180-SDN MJ For EX180-SMJ Communication connector type 1 T-branch type 2 Straight type EX180-C 1 EX180-C 2 187

23 EX180-SEC5-X230 For Output EX180 Series Made to Order Please contact SMC for detailed specifications and lead times. Prepare the SI unit and manifold valve (without SI unit) separately, and combine them before use. q EtherCAT PNP (Negative common), 32 outputs EX180-SEC5-X230 The communication connector and power supply connector do not come with this product. (When the SI unit is removed) (10.3) EtherCAT Communication connector (OUT) EtherCAT Communication connector (IN) Ground terminal (M3) Output connector (50 pins) A2 A1 B2 B1 SI 24V SI 0V EX260 SV 24V SV 0V EX123/124/126 Power supply connector (PWR1) (PWR2) Lock plate 39.5 EX600 EX500 EX9-CP6-X27 Power supply connector for the EX180-SEC5-X230 This connector is not supplied at the time of shipment. The minimum ordering quantity of this product is one box (50 pcs. included) EX245 EX250 w AnyWireASLINK NPN (Positive common), 32 outputs EX180-SAW1-X237 EX180-SAW1-X Communication connector EX120/121/ (44.2) EX140 (39.7) 30.9 M3 Ground terminal EX180 Before mounting connector (accessory) Specific Product Precautions EX510 Be sure to read this before handling the products. Refer to page 277 for safety instructions. For fieldbus system precautions, refer to pages 278 to 280 and the Operation Manual on the SMC website: Operating Environment Warning 1. Do not use this product in the presence of dust, particles, water, chemicals, and oil. Use around such materials is likely to cause a malfunction or breakage. Trademark DeviceNet is a trademark of ODVA. EtherCAT is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany. 188 A M8/M12 ATEX