M8/M12 Connector. PCA/EX9/EX500 Series. Reduction in wiring time. Conforming to IEC Fieldwireable Connectors

Transcription

1 / Connector /EX9/EX00 Series Fieldwireable Connectors Reduction in wiring time The man-hours can be decreased because no exclusive tools (such as solder, crimped terminal) are required.also, the wire length can be adjusted at the site. QUICKON-ONE Spring-cage Connection Piercecon Conforming to IEC Reduction in wiring time Just insert the connector and make / rotation. Knurl Align here. EX0 EX80 EX60 EX0 EX00 EX0 Make / rotation. IP67 (IEC609) Conforming to IEC The coloring and number indication to the electrical connection makes less wrong wiring. Blue Black Blue Black 907

2 It provides the Fieldbus communication unit and input device applicable to Communication Cable/Connector P. 9 to P. 9 It has a product lineup applicable to any communication standards. The SMC Fieldbus (SI) Unit can be connected to the PLC (controller) and communication units of other manufacturers with cables with connectors and fieldwireable connectors (with shield) applicable to the standards of CC-Link, DeviceNet TM, and PROFIBUS DP. PLC Manifold solenoid valve P.9 P.9 P.9 Communication cable Fieldwireable communication connector Terminal plug (Terminating resistor) It is connected to the communication port of the communication unit connected at the end. Socket (Female) For CC-Link For DeviceNet TM 0 For PROFIBUS DP Plug (Male) For CC-Link 7 For DeviceNet TM For PROFIBUS DP 9 Plug (Male) For CC-Link 6 For DeviceNet TM For PROFIBUS DP Socket (Female) For CC-Link 8 For DeviceNet TM For PROFIBUS DP For DeviceNet TM (Plug) For PROFIBUS DP (Plug/B-coded) Product Table Description Application No. SMC part no. Name Cable with connector Fieldwireable connector Terminal plug For Fieldbus communication For Fieldbus communication For Fieldbus communication Communication cable for CC-Link (Socket) Communication cable for CC-Link (Plug) Communication cable for DeviceNet TM (Socket) Communication cable for DeviceNet TM (Plug) Communication cable for PROFIBUS DP (Socket/B-coded) Communication cable for PROFIBUS DP (Plug/B-coded) Fieldwireable connector for CC-Link (Plug/Spring-caged) Fieldwireable connector for CC-Link (Socket/Spring-caged) Fieldwireable connector for DeviceNet TM (Plug/Spring-caged) Fieldwireable connector for DeviceNet TM (Socket/Spring-caged) Fieldwireable connector for PROFIBUS DP (Plug/B-coded/Spring-caged) Fieldwireable connector for PROFIBUS DP (Socket/B-coded/Spring-caged) Terminating resistor for DeviceNet TM () Terminating resistor for PROFIBUS DP (/B-coded) 908

3 / connector and the sensor/switch connected to them as a total system. Between Sensor/Switch and Input Device P. 96 to P. 99 Connection between connectors and products Pressure switch Fieldwireable connector P.97 Cable with connector P.98 Input block It has a product lineup of the fieldwireable connector that does not need any special tools. The lead wires can easily be made into / connector by changing the wire length. Piercecon connection The wiring can be changed accordingly. 9 Input unit manifold EX00 series Select the input block of the EX00 series according to the sensor output specification. 6 8 EX0 Auto switch QUICKON-ONE connection Y connector P.99 The input block reads sensor signals with one port. The wires of the auto switch and the pressure switch that has one output type can be decreased by unifying the signal wires using a Y connector. x EX00-IE, EX00-IE, EX00-IE, 6 Manifold solenoid valve with input/ output unit EX0 series EX0-IE, EX80 EX60 EX0 EX00 EX0 / connector (Fieldwireable/Pre-wired) x 8 EX0-IE Pre-wired type -input type input block is the -type connector only. Product Table Description Cable with connector Fieldwireable connector Y connector For sensor For sensor For sensor Application No. SMC part no. Name Cable with connector ( pins/ m) Cable with connector ( pins/ m) Fieldwireable connector (/ pins/plug/piercecon connection) Fieldwireable connector (/ pins/plug/quickon-one connection/) Y connector ( x ( pins)- ( pins)/) Y connector ( x ( pins)- ( pins)/) 909

4 Other / Connector Accessories (EX00/EX0/EX9) B Power cable with connector (For GW unit) A Communication connector F Seal cap (For socket) C Cable with connector Output block Power block P. 90 to P. 9 B Power cable with connector (For EX0/Power block) E Cable with connector for output entry F Seal cap (For socket) D Terminal plug F Seal cap (For plug) A Communication connector B Power cable with connector D Terminal plug (For EX00) For DeviceNet TM (With cable) For GW unit (A-coded) For EtherNet/IP TM or EtherCAT For EX0/Power block (B-coded) E Cable with connector for output entry (RJ-, with cable) C Cable with connector (For EX00) F Seal cap For plug For socket Other / Connector Accessories (EX00/EX0/EX9) Description Cable with connector 90 Terminal plug Seal cap Application No. SMC part no. Name EX00-AC -DN Communication cable for DeviceNet TM (Socket) For Fieldbus A communication Communication cable for EtherNet/IP TM or EtherCAT EX9-AC00EN-PSRJ ( plug/d-coded-rj) EX9-AC - EX00-AP -S For power supply B EX00-AP -A Power cable with connector (Socket/A-coded) Power cable with connector (Socket/B-coded) For EX00 C EX00-AC -SSPS Cable with connector (8 pins/both straight) EX00-AC -SAPA Cable with connector (8 pins/both angle) For output entry For EX00 For plug E D F EX9-AC -7 EX00-AC000-S EX00-AWTP EX9-AWES EX9-AWTS Cable with connector (Plug/A-coded) Terminal plug (/8 pins) Seal cap (/For plug) Seal cap (/For socket) Seal cap (/For socket)

5 Communication Cable/Connector Example of Connection/Specifications CC-Link DeviceNet TM PROFIBUS DP Dimensions Between Sensor/Switch and Input Device Example of Connection Specifications/Dimensions Fieldwireable connector Cable with connector Y connector Other Accessories Example of Connection How to Order/Dimensions Compatibility between Sensors and Fieldwireable Connectors American Wire Gauge Conversion Table Safety Instructions/Precautions P.9 P.9 P.9 P.9 P.96 P.97 P.98 P.99 P.90 P.9 P.9 P.96 P.97 EX0 EX80 EX60 EX0 EX00 EX0 9

6 Communication Cable/Connector Example of Connection PLC Serial wiring with Input/Output unit Solenoid valve manifold IN side IN side OUT side EX0 Series OUT side Specifications Series Part no. Description Communication cable (With one side connector) Fieldwireable connector Product image Number of functional poles Key type Pin assignment Note) Rating/Performance Material Fixed cable length Cable O.D. Wire gauge (Stranded wire cross section) Wire outer diameter (Including insulating material) Connection type Rated current Rated voltage Contact resistance Insulation resistance Withstand voltage Ambient Connector temperature Operating Cable Fixed Weight Protection class Allowable repeated insertion/withdrawal Cable retaining force Material of knurl Contact (Surface treatment) Insulating material Material of sheath Socket Approx. 06 g Plug Plug Socket : poles Plug, A-coded Socket, A-coded (Viewed from the plug/socket side) Approx. 08 g Approx. 8 g : SLD (Shield wire) : DB () : DG (Yellow) : DA (Blue) Approx. g Note) The shaded parts show the specifications for the applicable cable. Adaptation for the connector may vary on account of the conductor construction of the electric wire. 9 m 7.7 ±0. mm 0. mm /AWG0. ±0.07 mm 0 V to 90 C 0 to 60 C 0 to 60 C 0 N/ sec. Zinc die-cast A mω 00 MΩ. kv IP67 (Only with screw tightened) 00 Applicable cable CuSn (Au plating (Ni plating)) Thermoplastic polyurethane (TPU) Polyvinyl chloride ().0 to 8.0 mm 0. to 0. mm /AWG6 to 0 Spring-cage connection 8 V 0 to 8 C Brass Polyamide (PA6.6)

7 Communication Cable/Connector Example of Connection PLC Serial wiring with Input/Output unit Solenoid valve manifold Connected at the end Discrete and decentralized serial wiring GW unit EX0 Series Specifications Part no. Product image Description Number of functional poles Key type Pin assignment Note) Rating/Performance Material Fixed cable length Cable O.D. Wire gauge Power pair (Stranded wire cross section) Data pair Wire outer diameter Power pair (Including insulating material) Data pair Connection type Rated current Rated voltage Contact resistance Insulation resistance Withstand voltage Ambient Connector temperature Operating Cable Fixed Protection class Allowable repeated insertion/withdrawal Cable retaining force Material of knurl Contact (Surface treatment) Insulating material Material of sheath EX00 Series Communication cable (With one side connector) Fieldwireable connector Terminal plug Socket Plug Plug Socket : poles DeviceNet TM / CANopen : DRAIN : : V+ (Red) : Plug, A-coded Socket, A-coded : V (Black) : CAN GND : CAN H () : CAN H (Viewed from the plug/socket side) : CAN L (Blue) : CAN L m 6.70 ±0. mm.0 to 8.0 mm Applicable 0. mm /AWG cable 0. to 0. mm /AWG6 to 0 0. mm /AWG. ±0.0 mm.0 ±0.0 mm Spring-cage connection A 8 V mω 00 MΩ.0 kv to 90 C 0 to 8 C 0 to 7 C 0 to 80 C IP67 (Only with screw tightened) 00 0 N/ sec. Zinc die-cast Brass CuSn (Au plating (Ni plating)) Thermoplastic polyurethane (TPU) Polyamide (PA6.6) Polyurethane (PUR) For DeviceNet TM (Plug, A-coded) : DRAIN: NC : V+: NC : V : NC : CAN H Ω : CAN L Weight Approx. 08 g Approx. 06 g Approx. 7 g Approx. g Approx. g Note) The shaded parts show the specifications for the applicable cable. Adaptation for the connector may vary on account of the conductor construction of the electric wire. to 90 C Zinc die-cast Thermoplastic polyurethane (TPU) 9 EX0 EX80 EX60 EX0 EX00 EX0

8 Communication Cable/Connector Example of Connection PLC A product connected at the end Serial wiring with Input/Output unit Solenoid valve manifold 0 IN side 0 OUT side Discrete and decentralized serial wiring GW unit EX0 Series Specifications EX00 Series Part no. Description Communication cable (With one side connector) Fieldwireable connector Terminal plug Product image Number of functional poles Key type Socket Plug Plug Socket : poles : poles B-coded (Reverse key) For PROFIBUS DP (Plug, B-coded) : poles : : VP : A Line (Green) : B Line 90Ω Pin assignment : Plug, B-coded Plug, B-coded : B Line (Red) : A Line : : DGND (Viewed from the plug/socket side) 0Ω 90Ω Fixed cable length m Cable O.D ±0. mm Applicable.0 to 8.0 mm Wire gauge (Stranded wire cross section) 0. mm /AWG cable 0. to 0. mm /AWG6 to 0 Wire outer diameter (Including insulating material). ±0.07 mm Connection type Spring-cage connection Rated current A Rated voltage 60 V 8 V 60 V Contact resistance mω Insulation resistance 00 MΩ Withstand voltage. kv Ambient Connector to 90 C 0 to 8 C to 90 C temperature Operating 0 to 80 C Cable Fixed 0 to 8 C Protection class IP67 (Only with screw tightened) Allowable repeated insertion/withdrawal 00 Cable retaining force 0 N/ sec. Material of knurl Zinc die-cast Brass Zinc die-cast Contact (Surface treatment) CuSn (Au plating (Ni plating)) Insulating material Polyamide (PA6.6) Thermoplastic polyurethane (TPU) Material of sheath Polyurethane (PUR) Weight Approx. g Approx. 6 g Approx. 8 g Approx. g Approx. g Note) The shaded parts show the specifications for the applicable cable. Adaptation for the connector may vary on account of the conductor construction of the electric wire. Note) Rating/Performance Material 9

9 Communication Cable/Connector Dimensions Communication cable (With one side connector) For CC-Link (Socket) ø.8. ø Terminal no. Terminal no. Cable wire colors For CC-Link : DB (Plug) : SLD Yellow: DG Blue: DA Cable wire colors : DRAIN Red: V+ Black: V : CAN H Blue: CAN L Terminal Cable wire no. colors : Green: A Line : Red: B Line : Shield line is connected to the knurl. Fieldwireable connector 6-76 For DeviceNet TM (Socket) -766 For DeviceNet TM (Plug) For PROFIBUS DP (Socket) B-coded (Reverse key) -769 For PROFIBUS DP (Plug) B-coded (Reverse key) ø.8 ø.8 ø.8 ø.8 ø Plug Socket For CC-Link For DeviceNet TM For PROFIBUS DP For CC-Link For DeviceNet TM For PROFIBUS DP 60 8 ø7.7 ø6.7 ø6.7 ø7.8 ø EX0 EX80 EX60 EX0 EX00 EX0 ø9 ø7 ø9 ø7 A-coded (Normal key) B-coded (Reverse key) Width across flats 6 A-coded (Normal key) B-coded (Reverse key) Width across flats 6 Terminal plug Terminating resistor for DeviceNet TM ø Terminating resistor for PROFIBUS DP ø

10 Between Sensor/Switch and Input Device Example of Connection Sensor with pre-wired connector Direct connection between connectors Cable with connector P.98 Input block Input unit manifold EX00 series 8 Sensor with lead wire entry Lead wire / connector conversion Fieldwireable connector 6 P.97 8 EX00-IE, EX00-IE, EX00-IE, 6 QUICKON-ONE connection 7 connection 9 Manifold solenoid valve with input unit EX0 series Auto switch with pre-wired connector Y connector x 0 P.99 EX0-IE, EX0-IE 8 Pre-wired type Can be wired to the input block after converting -output signal to -output signal. ( only) / connector (Fieldwireable/Pre-wired) Auto switch with lead wire entry Lead wire / connector conversion x Fieldwireable connector P.97 6 QUICKON-ONE connection 7 connection 96 Cut the cable into the necessary length, and wire with fieldwireable connectors.

11 Between Sensor/Switch and Input Device Fieldwireable Connector Specifications Part no. Product image/pin assignment Number of functional poles Key type Cable O.D. Wire gauge (Stranded wire cross section) Core wire diameter (Including insulating material) Note) Rating/Performance Material Applicable cable Connection type Rated current Rated voltage Contact resistance Insulation resistance Withstand voltage Ambient temperature Protection class Allowable repeated insertion/withdrawal Allowable number of repeated connection between conductors of the same cross section Material of knurl Contact (Surface treatment) Insulating material Weight Plug Plug Plug Note) The shaded parts show the specifications for the applicable cable. Adaptation for the connector may vary on account of the conductor construction of the electric wire. Dimensions : poles.0 to.0 mm 0. to 0. mm /AWG6 to 0. to 0. mm /AWG to.0 to.6 mm Piercecon connection 60 V.0 kv 0 to 8 C 00 Brass Approx. g. to 6.0 mm 0. to 0. mm /AWG6 to 0.7 to. mm A mω 00 MΩ : poles QUICKON-ONE connection 0 V. kv to 80 C IP67 (Only with screw tightened) 0 00 Zinc die-cast CuZn (Au plating (Ni plating)) Polyamide (PA6.6) Approx. g.0 to 8.0 mm 0. to 0.7 mm /AWG to 8. to. mm Approx. g EX0 EX80 EX60 EX0 EX00 EX0-770 Fieldwireable connector (). Wire color ø Fieldwireable connector () Width across flats Width across flats ø6. Blue Black Wire color Blue Black Fieldwireable connector () Width across flats ø.8 SW ø8. Wire color Blue Black 97

12 Between Sensor/Switch and Input Device Cable with Connector Specifications Part no Product image Number of functional poles Key type Rating/Performance Material Fixed cable length Cable O.D. Wire gauge (Stranded wire cross section) Rated current Rated voltage Contact resistance Insulation resistance Withstand voltage Ambient Connector temperature Operating Cable Fixed Weight Protection class Allowable repeated insertion/withdrawal Cable retaining force Material of knurl Contact (Surface treatment) Insulating material Material of sheath : poles m.7 ±0. mm 0. mm /AWG A 0 V mω 00 MΩ. kv to 90 C to 80 C 0 to 80 C IP67 (Only with screw tightened) 00 0 N/ sec. Zinc die-cast CuSn (Au plating (Ni plating)) Thermoplastic polyurethane (TPU) Polyurethane Black (PUR Black) Approx. g : poles. ±0. mm 0. mm /AWG 60 V.0 kv 0 N/ sec. Approx. 80 g Dimensions Cable with connector ( poles) ø ø.7 ø Cable with connector ( poles) ø0 ø. ø0 98

13 Between Sensor/Switch and Input Device Y Connector Specifications Part no Product image 0 Number of functional poles Key type Rating/Performance Material Rated current Rated voltage Contact resistance Insulation resistance Withstand voltage Ambient temperature Protection class Allowable repeated insertion/withdrawal Material of knurl Contact (Surface treatment) Insulating material Weight Dimensions Y connector ( x -) ø Y connector ( x -). 8 ø ø..8 x : poles : poles x : poles : poles A 60 V mω 00 MΩ.0 kv to 90 C IP67 (Only with screw tightened) 00 Zinc die-cast CuZn (Au plating (Ni plating)) Thermoplastic polyurethane (TPU) Approx. 9 g Approx. g.8 ø ø ø.8.6 ø.8.7 q w q w EX0 EX80 EX60 EX0 EX00 EX0 99

14 Other Accessories / Connector Accessories (EX00/EX0/EX9) A B Power cable with connector (For GW unit) F Communication connector Seal cap (For socket) C Cable with connector Output block Power block B Power cable with connector (For EX0/Power block) E Cable with connector for output entry F Seal cap (For socket) AS-Interface F Seal cap (For plug) D Terminal plug G Power cable with connector H Power cable with connector (for SI unit) A B C Communication connector For DeviceNet TM (with cable) For EtherNet/IP TM or EtherCAT (RJ-, with cable) Power cable with connector For GW unit (A-coded) For EX0/Power block (B-coded) Cable with connector (For EX00) D Terminal plug (For EX00) E F Cable with connector for output entry Seal cap For plug For socket G Power cable with connector H Power cable (for SI unit) 90

15 Other Accessories A Communication connector For DeviceNet TM 00 EX00 AC Cable length (L) [mm] [mm] ø ø7 L DN For EtherCAT or PROFINET SI unit EX9 AC 00 EN Cable length (L) [mm] [mm] [mm] [mm] [mm] D-coded ø6.7 PSRJ Connector specification plug (Straight) PSRJ RJ- connector 7. L B Power cable with connector (For GW unit, SI unit (A-coded)) EX00 AP 00 S 0 Core wire colors : DRAIN Red: V+ Black: V : CAN H Blue: CAN L Core wire colors (Straight cable) Orange Green Shield Paired Paired RJ- EX0 EX80 EX60 EX0 EX00 EX0 Cable length (L) [mm] [mm] Connector specification S Straight A Angle Straight connector type Angle connector type ø6 ø L ø6 0 Core wire colors Blue Black Gray L 0 Core wire colors Blue Black Gray 9

16 Other Accessories / Connector Accessories (EX00/EX0/EX9) B Power cable with connector (For EX0/Power block (B-coded)) L EX9 AC Cable length (L) [mm] [mm] [mm] Core wire colors Blue Black Gray ø C Cable with connector EX00 AC 00 SSPS Cable length (L) [mm] [mm] [mm] [mm] [mm] Connector specification SSPS Socket side: Straight, Plug side: Straight SAPA Socket side: Angle, Plug side: Angle Straight connector type Angle connector type L 8 ø6 ø.9 Core wire colors Green 7 Yellow Gray Pink Blue 8 8 Shield ø ø6.. L Core wire colors Green Yellow Gray 6 Pink 7 Blue 8 Shield D Terminal plug This is used where an input unit manifold (input unit/input block) is not being used. (If a terminal plug is not used, the GW unit s COM LED will not light up.) EX00 AC000 S ø6.7 9

17 Other Accessories E Cable with connector for output entry EX9 AC 00 7 L Cable length (L) [mm] [mm] Core wire colors Blue Black Gray ø F Seal cap: connector (For plug) Use this on ports that are not being used for a connector (plug). Use of this waterproof cap maintains the integrity of the enclosure. Note) Tighten the waterproof cap with the prescribed tightening torque. (For : 0. N m) EX00 AWTP ø.9 9. F Seal cap:, connector (For socket)/accessories Use this on ports that are not being used for a, connector (socket). Use of this waterproof cap maintains the integrity of the enclosure. (Waterproof cap is packed together with each unit.) Note) Tighten the waterproof cap with the prescribed tightening torque. (For : 0.0 N m, For : 0. N m) EX9 AW Connector type ES connector (For socket, 0 pcs.) TS connector (For socket, 0 pcs.) EX0 EX80 EX60 EX0 EX00 EX x 0. x connector (For socket) connector (For socket) 9

18 Other Accessories / Connector Accessories (EX00/EX0/EX9) G Power cable with connector Connects between the power supply connector for the power block and the SI unit power supply connector, bridging the external power supply, which is supplied with the power block, to the SI unit. EX9 AC00 EX9-AC00- SI unit type EX0-SDN EX0-SMJ Compliant EX0-SCAA EX0-SPR Compliant EX0-SEN EX0-SAS/ Compliant EX9-AC00- Reverse keyway 00 Blue Black Gray Connections 00 ø6. ø6. 8. Reverse keyway 8. Reverse keyway Blue Black Gray Connections EX9-AC00-00 ø6. 8. Reverse keyway Connections H Cable connecting between AS-Interface power supply line (for external devices) branch connector () and the power block s power supply input connector. EX9 AC 00 9 AS-Interface power cable Cable length (L) [mm] [mm] [mm] 8. Reverse keyway L Connections ø6.

19 Compatibility between Sensors and Fieldwireable Connectors Pressure Switch Model Cable part no. Number of cores : Applicable : Applicable, but number of electric wire cores is limited. (Number of sensor lead wire cores is larger than the number of connector pins.) : Connectable, but may not correspond to IP6/67 depending on installation method. Applicable connector Cable specifications Sheath Insulator Conductor 6 7 O.D. Material O.D. Material Nominal cross section O.D. Strand diameter : Non-conformance Note Z/ISE0A- ZS-8- ZS-8- ø. ø mm (AWG6) ø mm ISE- Z/ISE0A - ISE70/7(H)- Z/ISE80 - ISA- Flow Switch Model PFA7 PFW7 ZS--A- Integrated type ZS--B ZS--C Integrated type ISA-8-A ISA-8-B Cable part no. ZS-7-A ZS-7-B Number of cores ø. ø. ø.0 ø. ø6.0 ø.0 ø. ø0.9 ø. ø0.9 ø.7 ø. 0.0 mm (AWG) 0. mm (AWG6) 0.0 mm (AWG) 0. mm (AWG6) 0. mm (AWG) AWG ø0.8 ø0. ø0.7 ø0. ø0.9 ø mm 0.08 mm 0.08 mm 0.08 mm 0.8 mm Applicable connector Cable specifications Sheath Insulator Conductor 6 7 O.D. Material O.D. Material Nominal cross section O.D. Strand diameter 0.08 mm Straight Angle Straight Angle Note Straight Angle EX0 EX80 EX60 EX0 EX00 EX0 PFM7 ZS--D ø. ø.00 AWG6 ø mm Note) Information on cable specifications is based on specification sheets supplied by the manufacturer. 9 A

20 American Wire Gauge Conversion Table This table shows to change American wire gauge (AWG) into a diameter. The wire material is indicated as AWG (American wire gauge) in the documentations overseas. Use the following table for conversion into diameter. Wire size (AWG) Diameter (mm) 7.8 Cross section (mm ).86 Wire size (AWG) 7 Diameter (mm). Cross section (mm ).000 Wire size (AWG) Diameter (mm) 0.8 Cross section (mm )

21 Cable/Connector Accessories Precautions Be sure to read this before handling the products. Caution. Do not lay the wires while they are energized. It may give you an electric shock.. It should be cabled according to the connection diagram.. Check if it can be connected when using a sensor or switch.. When the cable sheath is stripped, confirm the stripping direction. (For SMC switches with oblong cables) The insulator may be split or damaged depending on the direction. Tightening of Screw Caution. It cannot maintain the enclosure (IP6 ) or the screws may be loosened if they are not tightened sufficiently.. Check that they are tightened enough at appropriate intervals during the operation. Connection and Disconnection of Connector Caution. Be sure to turn the power off when connecting and disconnecting the connectors.. Do not touch surface of the engagement with wet hands.. Do not pull the cable out by holding the cable.. Note the key direction. Especially for the specifications, match the protrusion of the knurl (bracket) and the mark at the mold for insertion so that the function can be maintained.. When engaging the connectors, insert the connectors enough until all the engagement surfaces can be hidden and tighten the screws not to damage the thread ridges. Handling of Cable with Connector Caution. Avoid repeatedly bending or stretching the cable and applying a heavy object or force to it.. Set up the cables to the place where they cannot be stepped on in order to prevent them being broken or damage to the connectors. Install a protective cover in case it is used in the place stated above.. Do not pull the connector or cable unnecessarily. It may damage the connectors or break the cables.. Do not bend the cable at the root of the connector when installed. Handling of Fieldwireable Connector Caution Common Precautions. Follow Assembly Procedure provided by SMC. If not, it may not maintain IP6/67.. Do not use it besides an original purpose.. This connector may only be operated when under no load.. The work by the wet hand causes the electric shock.. Never perform the repair. Spring-cage Connection. Do not use it besides an original purpose. EX0. This connector may only be operated when under no load. EX80. The work by the wet hand causes the electric shock.. Never perform the repair. EX60 QUICKON-ONE Connection EX0. Connection between cables (with the same material and the same cross section) is 0 times at max.. or PE is suitable for sheath material, however fluoro resin is not suitable for sheath material. EX00. Only for flexible cable, not for solid cable. EX0. When you remove the cable, pull the cable. However, if you remove the Cable gland, cable and the Splice ring remain to the body. When you connect the cable again, screw the Splice ring approx. two turns into the Cable gland before using.. When you connect the cable again, cut and strip the cable. Piercecon Connection. Connection between cables (with the same material and the same cross section) is 0 times at max.. Only for flexible cable, not for solid cable.. If you connect the cable again, cut and strip the cable. Operating Environment Caution. Do not use in the atmosphere and environment over the rated specifications.. Do not use in the environment of corrosive gas or liquid splash.. Do not use in an environment where oil and chemicals are used. Maintenance Caution. Perform periodic inspection. 97