SPAN CONTROLS. For Quality, Reliability And Service

Transcription

1

2 Span Controls Established in 1987, Span Controls is now one of the leading manufacturers of Switch Mode Power Supplies, Battery Chargers, DC-DC Converters and LED Drivers in India. Having more than 25 years of experience in the same we offer our customers the widest range of products complimented by unmatched quality and timely deliveries. Span Controls has been supplying power supplies & converters to public as well as private sector companies manufacturing telecommunication products, data acquisition systems, Weighing scales, Gensets, Medical electronics etc. for quite a long time. Also it has entered the Lighting industry with its newest and latest range of LED Drivers. With a total strength of more than 50 skilled employees and manufacturing facility of more than 3000 sq.ft. equipped with tools of latest technology we assure you our best deliveries and volume quantity production that shall definitely help fulfil all your power supply, chargers and LED drivers requirement on a long term basis.

3 Automation SMPS Features Wide Input Range Built-in EMI Filter Low Output Ripple Cooling by free air convection 100% full load burn-in test 1 year warranty 24 2A 24 5A 24 10A 24 20A Technical Parameters Output Input Part Number Output Voltage Output Current Typical Output Power Line and Load Regulation Ripple(Pk-Pk, BW 20Mhz) Input Voltage Range Efficiency Inrush Current Surge Voltage Protection Over Voltage Protection Protection Over Load Protection Short Circuit Protection - Isolation - - Enviornmental Operation Temperature Connection Physical Parameters Dimensions Mounting 24VDC/2A 2A 48W VAC 50/60Hz 5P/5.08mm MKDS 123 x 80 x 50mm 24VDC/5A 5A 120W 1% < 1% VAC 50/60Hz 24VDC/10A 10A 240W 24VDC/20A 20A 480W VAC 50/60Hz MOV Protection 27Vdc (Auto-Recovery) % of rated o/p voltage Yes(Auto Recovery) i/p to o/p >2KV RMS i/p to PE > 1.5KV RMS o/p to PE > 0.5KV RMS 0 C to 70 C 7P/5.08mm MKDS 7P/7.5mm GMKDS 60mm 196 x 135 x 60mm 230 x 165 x 85mm Panel / Din-Rail * Specifications are subjected to change without prior notice 7P/5.08mm MKDS 163 x 95 x

4 Battery Chargers Features Wide Input Range, Built-in EMI Filter Automatic selection of Float & Boost 100% full load burn-in test Overload & Battery reverse Protection 1 year warranty Technical Parameters Output Input Protection Misc Part Number Output Voltage Output Current Line and Load Regulation Input Voltage Range Efficiency Short Circuit Protection Battery Reverse Over Temperature Isolation Charge Mode Control Indications End Of Charging BC - 12 V 6 BC - 24 V 24 BC-12V6 13.8Vdc 6Amps VAC 50/60Hz Yes BC - 12 V 10 BC - 24 V 24 BC-12V Vdc 10Amps 1% Yes Yes BC-24V Vdc 15Amps 2KV RMS Float to Boost Automatic changeover (CV/CC) Float, Boost, Battery Reverse, Mains On Constant Voltage VAC 50/60Hz No BC-24V Vdc 20Amps Enviornmental Physical Parameters Operation Temperature Connection Dimensions Mounting 0 C to 70 C Combicon Connectors 164 x 106 x 60mm 150 x 110 x 90mm 230 x 130 x 100mm 230 x 130 x 100mm Panel / Din-Rail Panel * Specifications are subjected to change without prior notice

5 Power Pack Features Automatic Changeover on Battery Wide AC input range In-built 12V 7Ah SMF Battery >20 minutes Battery Back-up Protections : Short Circuit & Over load Cooling by free air convection 100% full load Burn in 1 Year warranty Technical Parameters Output Input Auto Changeover Protections Misc. Part Number Output Voltage Output Current Typical Output Power Line Regulation Load Regulation Ripple & Noise (Max) Input Voltage Range AC Current In-rush current Efficiency I/P Under Voltage Cut-off I/P Over Voltage Cut-off Over Load Battery Low Working Temperature Dimensions Connectivity SCP Vdc 4.16 Amps SCP Vdc 3.33 Amps SCP SCP SCP SCP Vdc 0.9 Amps 100W < ± 0.2% < ± 1% < 1% of Output Voltage VAC 45-65Hz 1Amp / 230VAC Cold Start 30Amps (Max) / 230VAC Under voltage Cut Off= 150VAC ±10VAC and Recovery 160VAC ±10VAC after cut-off, o/p automatically changes over to battery Over voltage Cut Off= 290VAC ±10VAC and Recovery 280VAC ±10VAC after cut-off, o/p automatically changes over to battery Constant Current with Auto Recovery Output shuts down at Battery voltage 10.5VDC 0-55 C 325 x 135 x 170mm ; panel mounting 6 Pin open type Terminal Strip * Specifications are subjected to change without prior notice

6 Sr. No. 15/8, Unit No. 9, Kruti Industrial Estate, Opp. Sangam Press, Kothrud, Pune Tel. : , , Fax : info@spancontrols.co.in / ajinkya.darekar@spancontrols.co.in