FACT OPTICAL DISTRIBUTION FRAME SYSTEM

Transcription

1 FACT OPTICAL DISTRIBUTION FRAME SYSTEM Fiber Connectivity for Splice/ Patch and Patch/Patch For almost 30 years, TE Connectivity has led the industry with solutions such as FIST fiber management system, providing a system of fiber management from the central office through the customer premises. Now, TE continues that leadership with the introduction of the FACT ODF system, enabling faster and easier installation in a high density environment. The toolless system approach and the high level of modularity guarantee an easy migration path towards new connectivity platforms and expansion of existing central office sites. FACT modules support full patch and/or splice-patch functions within a rack environment. Trays within the element can be configured with adapters, splicing and passive optical components. Trays are staggered for easy fiber routing and access to connectors. Currently available, the FACT standard version integrates into a current partially or non-equipped FIST-GR2/3 frame or lineup. FEATURES Patching, using patch cords, connectorized breakout or intrafacility cables Splicing loose tube, non-connectorized intrafacility or breakout cables to pigtails and patching these pigtails to patch cords Supports integration of passive optical splitters and wavelength division multiplexers Various connector/adapter types possible Enhanced modularity created by stacking four elements together in a 3HU grouping Full patching capability on the elements and between elements in one module and across modules Use of connectorized cables allows repair of pigtails Easy identification of each fiber Kits available to attach cables at the side of the elements Full wrap-around solution accessible from the front to guide fibers and pigtail Can be installed in TE FIST racks and other 19-inch or metric (ETSI) rack sizes FACT elements and modules are shipped with the maximum number of trays already installed. BENEFITS OF ADVANCED ELEMENT PATCHING Easy: Full front access and non-moving fiber during element manipulation Fast: Toolless scalable system Clean: Both sides easily accessible for cleaning adapters Safe: Laser light oriented perpendicularly to the operator Accessible: Full front access at both sides of connection Visible: Patch cords do not hamper access or visibility of ports Secure: Because of their position in the trays, connectors are better protected than in some front facing patch shelves Manipulation of patch cords does not cause transient losses Reconnection to other positions in the same tray or shelf does not result in uncontrolled overlengths Bend controls guide and protect the pigtail cable and ensure controlled cable routing

2 Fiber Connectivity Elements for Splice/Patch and Patch/Patch DIMENSIONS OF FACT ELEMENTS Height in mm Width in mm Depth in mm standard/ small-form-factor adapters Standard (retrofit in FIST-GR3 frames) /24 ORDERING FACT MODULES Element colors: Orange (RAL 2011) and grey (RAL 7035) Elements are always ordered fully loaded For a list of accessories and consumables, please refer to the FACT accessories ordering guide Elements can be configured with single adapters or with adapter packs Cable construction (the number of fibers per cable) will determine the number and combination of elements to be ordered Depending on the cable s fiber count, at least one of the total number required to support that number of fibers must be releasable (equipped with a latch that allows a set/combination of elements to be removed from the rack Elements support most common cable constructions (loose tube, central core, IFC) Four (4) elements equal 3HU (125mm) Cable fiber count SC connectors/adapters LC connectors/adapters 24 SC connectors per element (1) 48 LC connectors per element (2) FCEs Height Units FCEs Height Units 24 1 Fits 1HU 1* Fits 1HU 48 2 Fits 2HU 1 Fits 1HU 72 3 Fits 3HU 2** Fits 2HU 96 4 Fits 3HU 2 Fits 2HU Fits 4HU 3 Fits 3HU Fits 5HU 4 Fits 3HU Fits 6HU 1 SC connectors with up to 2.4mm patch cords 2 LC connectors with up to 1.8mm patch cords * Element ships with 2 trays, each with 12 LC adapters (24 LC connections); 48 LC connections in total. Unused tray may be discarded or used for future growth. ** Each elements ship with 2 trays, each with 12 LC adapters (24 LC connections). 96 LC connections in total. Unused trays may be discarded or used for future growth. PAGE 2

3 Standard Size for FIST-GR Retrofit FACT STANDARD SIZE Ordered for retrofit into a current partially or non-equipped FIST-GR2/3 frame or lineup PAGE 3

4 Standard Size for FIST-GR Retrofit ORDERING INFORMATION FACT Module - Standard Size Patch only. No Cable. Standard kit includes: Trumpets Hook and loop fasteners Back plates ordered separately. Size of back plate defined by port/fiber count. See page 7 for information. FACT - S - AA - 0 NN Port count position position position position position position position (LC only) Adapter type Single adapters S1 SC/UPC S2 SC/APC 8 L1 LC/UPC L2 LC/APC E9 E Adapter packs PS1 SC/UPC PS2 SC/APC 8 PL1 PL2 LC/UPC LC/APC PAGE 4

5 Standard Size for FIST-GR Retrofit ORDERING INFORMATION FACT Module - Standard Size Splice/Patch. No Cable. Standard kit includes: Trumpets Hook and loop fasteners Back plates ordered separately. Size of back plate defined by port/fiber count. See page 7 for information. Cable attachment kits ordered separately. Attachment size defined by fiber size and type. See pages 8 and 9 for information. FACT - S NN Port count position position position position position position position (LC only) Adapter type Single adapters Standard (Grade c) Superior (Grade B) SC/UPC S1 - SC/APC 8 S2 SG SC/APC 9 S3 - LC/UPC L1 LF LC/APC L2 LG E E9 - Adapter packs Tray option Standard adapters Right of shelf (1) Left of shelf (2) Adapters; SMOUV splice protector; no fiber (3) AE EA Adapters; ANT splice holder (4) ; no fiber AF FA Connector/adapters; with pigtails and SMOUV splice protector (3) ; fiber from adapters to splice holder, ready for incoming cable Connector/adapters; with pigtails and ANT splice holder (4) ; fiber from adapters to splice holder, ready for incoming cable AI AJ 1 Patch cords leave shelf to right 2 Patch cords leave shelf to left 3 45 mm SMOUV heat shrink splice protector is included 4 ANT splice holder ONLY; splice protectors must be ordered separately IA JA SC/UPC PS1 - SC/APC 8 PS2 PSG SC/APC 9 PS3 - LC/UPC PL1 PLF LC/APC PL2 PLG PAGE 5

6 Standard Size for FIST-GR Retrofit ORDERING INFORMATION FACT Modules - Standard Size Splice/Patch. Pre-cabled. Standard kit includes: Trumpets (pre-installed) Cable attachments (pre-installed) Hook and loop fasteners Back plates ordered separately. Size of back plate defined by port/fiber count. See page 7 for information. FACT - S - - Port count position position position position position position position (LC only) Adapter type Single adapters Standard (Grade c) Superior (Grade B) SC/UPC S1 - SC/APC 8 S2 SG Cable type Intrafacility cable IA 12-fiber (no strength member) IF 48-fiber (with strength member) Micro-distribution breakout cable MA 8-fiber MB 12-fiber Loose tube indoor cable OG 72-fiber OH 96-fiber OI 144-fiber Length in meters 0-99 SC/APC 9 S3 - LC/UPC L1 LF LC/APC L2 LG E E9 - Adapter packs SC/UPC PS1 - SC/APC 8 PS2 PSG SC/APC 9 PS3 - LC/UPC PL1 PLF LC/APC PL2 PLG Tray option Standard adapters Right of shelf (1) Left of shelf (2) Adapters; SMOUV splice protector; no fiber (3) AE EA Adapters; ANT splice holder (4) ; no fiber AF FA 1 Patch cords leave shelf to right 2 Patch cords leave shelf to left 3 45 mm SMOUV heat shrink splice protector is included 4 ANT splice holder ONLY; splice protectors must be ordered separately PAGE 6

7 Standard Size for FIST-GR Retrofit - Back Plates BACK PLATES FOR STANDARD SIZE FACT ELEMENTS AND MODULES Description Back plates Allow placement of FACT STANDARD size elements or modules in FIST-GR3 Fits 1 HU; mounts 1 standard size FACT element (2) cage nuts (2) bolts (2) washers (2) single U-shape FACT brackets FACT-BPLATE-1E-S Fits 2 HU; mounts 2 standard size FACT elements (4) cage nuts (4) bolts (4) washers (2) double U-shape FACT brackets Equal to 3 HU; mounts 4 standard size FACT elements (1 FACT module) (4) cage nuts (4) bolts (4) washers (4) double U-shape FACT brackets FACT-BPLATE-2E-S FACT-BPLATE-4E-S Cable fiber count SC connectors/adapters 24 SC connectors per element Height Units FCEs back plates LC connectors/adapters 48 LC connectors per element Height Units FCEs back plates 24 1 Fits 1HU (1) 1E-S 1 Fits 1HU (1) 1E-S 48 2 Fits 2HU (1) 2E-S 1 Fits 1HU (1) 1E-S 72 3 Fits 3HU (1) 1E-S + (1) 2E-S 2 Fits 2HU (1) 2E-S 96 4 Fits 3HU (1) 4E-S 2 Fits 2HU (1) 2E-S Fits 4HU (1) 2E-S + (1) 4E-S 3 Fits 3HU (1) 1E-S + (1) 2E-S Fits 5HU (2) 4E-S 4 Fits 3HU (1) 4E-S Fits 6HU (2) 4E-S PAGE 7

8 Standard Size for FIST-GR Retrofit - Cable attachment kits CABLE ATTACHMENT KITS FOR STANDARD SIZE FACT ELEMENTS AND MODULES Description Cable bracket kits 250 μ cable For cable diameters up to 8.5mm* Occupies 1 FACT element (2) single cable attachment sub-assemblies (2) strength members (2) 250 μ routing components (2) plastic covers (3) 250 μ overtubing (30 cm) (3) overtubing fixation devices (2) spiral tube protection pieces (2) tie wraps (1) foam strips (15 cm) FACT-CACC-SMALL-PF For cable diameters from 8.5mm to 15mm** Occupies 1 FACT element (1) single cable attachment sub-assembly (1) strength member (2) 250 μ routing components (1) plastic cover (2) 250 μ overtubing (30 cm) (2) spiral tube protection pieces (2) tie wraps (4) foam strips (15 cm) FACT-CACC-MEDIUM-PF Cable bracket kits 900 μ cable For cable diameters up to 8.5mm* Occupies 1 FACT element (2) single cable attachment sub-assemblies (2) strength members (2) 900 μ routing components (2) Plastic covers (2) Fiber fixation devices (2) spiral tube protection pieces (2) tie wraps (1) foam strips (15 cm) FACT-CACC-SMALL-SF For cable diameters from 8.5mm to 15mm** Occupies 1 FACT element (4) single cable attachment sub-assemblies (8) strength members (4) 900 μ routing components (4) plastic covers (8) fiber fixation devices (8) spiral tube protection pieces (8) tie wraps (4) foam strips (15 cm) FACT-CACC-MEDIUM-SF * Note: Cable should be flexible and allow minimum bend radius of 75 mm. Cable attachment fits corrugated tube 10mm outer diameter ** Note: Cable should be flexible and allow minimum bend radius of 75 mm. Cable attachment fits corrugated tube 16mm outer diameter PAGE 8

9 Standard Size for FIST-GR Retrofit - Cable attachment kits Cable fiber count SC connectors/adapters 24 SC connectors per element cable Height Units FCEs attachments LC connectors/adapters 48 LC connectors per element cable Height Units FCEs attachments SMALL MEDIUM SMALL MEDIUM 24 1 Fits 1HU Fits 1HU Fits 2HU Fits 1HU Fits 3HU Fits 2HU Fits 3HU Fits 2HU Fits 4HU Fits 3HU Fits 5HU Fits 3HU Fits 6HU 16 8 For more technical options and order quantity information, please consult the product ordering guide or your local sales representative. te.com FACT, FIST, SMOUV, TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity s obligations shall only be as set forth in TE Connectivity s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application TE Connectivity Ltd. family of companies All Rights Reserved /15 Revision PRODUCT SHEET TE Connectivity Broadband Network Solutions - EMEA Diestsesteenweg Kessel-Lo, Belgium Tel Tyco Electronics Raychem bvba, a TE connectivity company.